Top Hvac Technician Skills

Below we've compiled a list of the most important skills for a Hvac Technician. We ranked the top skills based on the percentage of Hvac Technician resumes they appeared on. For example, 16.2% of Hvac Technician resumes contained Package Units as a skill. Let's find out what skills a Hvac Technician actually needs in order to be successful in the workplace.

The six most common skills found on Hvac Technician resumes in 2020. Read below to see the full list.

1. Package Units

high Demand
Here's how Package Units is used in Hvac Technician jobs:
  • Convert evaporator to refrigerant unit; installation of package units and split systems; recover refrigerant and applied new refrigerant
  • Perform preventative maintenance on roof top package units* Diagnose and repair rooftop units as needed* Diagnose and repair refrigeration units as needed
  • Diagnosed and repaired geothermal chill water, package units, split systems, and mini-split systems both commercial and residential.
  • Maintained and serviced HVAC equipment including small residential, split systems and package units up to and including 25 tons.
  • Install, service, and repair split systems, package units, and mini-split straight cool and heat pump systems.
  • Repaired and installed HVAC package units and ductless split systems for ATT, T-Mobile and other cell sites.
  • Repair, and maintenance of residential and commercial air conditioning equipment, including split systems and package units.
  • Install, service, and repair heating, cooling, and ventilation residential systems and commercial package units.
  • Assisted in installation of various systems, including package units, split systems, and mini-split systems.
  • Perform diagnostic, service and install work on residential and light commercial split systems and package units.
  • Install furnace, air handler, central air systems and package units on residential and commercial applications.
  • Diagnose and repair rooftop package units, unit heaters, radiant tube heaters, mini split systems.
  • Installed a 30 and 40 ton rooftop package units and installed zoning system into commercial building.
  • Worked as a service technician servicing air conditioning systems to package units and split style systems.
  • Installed commercial and residential air conditioning units and split system and package units 3 ton-100 ton.
  • Service package units of 5-tons to 25-tons, and repair split units of 1-ton to 5-tons.
  • Experience working on Air col chillers, water cool, Package units and chill water pumps !
  • Maintain and repair HVAC chiller and boiler systems, package units, and split systems.
  • Install, service, and maintain split systems, package units, and mini-split systems.
  • Install furnace, central air systems package units and coolers for residential and commercial projects.

Show More

2. Hvac

high Demand
Here's how Hvac is used in Hvac Technician jobs:
  • Recognized for efficiency in troubleshooting, diagnosing, repairing and performing preventive maintenance on building faculty HVAC system.
  • Attended local HVAC conferences and also attended manufacturing upgrade training classes routinely.
  • Installed residential and commercial HVAC and refrigeration systems.
  • Diagnosed and repaired residential and commercial HVAC equipment.
  • Serviced and installed Commercial and Residential HVAC equipment
  • Performed routine maintenance on residential HVAC equipment.
  • Serviced residential and commercial/industrial HVAC accounts.
  • Monitor and control lighting, fire protection, HVAC, and other systems by using Johnson Controls computer web-based automation system.
  • Respond to resident service work order request, performing service and repair on HVAC systems, plumbing, electrical and carpentry.
  • Serviced and maintained HVAC units for residents as needed by replacing filters, cleaning and examining units for any needed repairs.
  • Assisted with the installation of New HVAC systems by installing electrical breakers, electrical whips, brazing copper refrigerant line sets.
  • Job Responsibilities: Preventive maintenance, electrical, plumbing, dry walling, carpentry, landscaping, Delta Operator-Building HVAC.
  • Replaced ten commercial HVAC unit compressors using brazing, evacuation, leak testing, and charging techniques as per manufacturer.
  • Serve as a HVAC technician for maintenance of air conditioning, heating ventilation, home boiler and light commercial boiler.
  • Analyze and review the blueprint of an HVAC project and lay out HVAC system parts according to the blueprint.
  • Served as general HVAC technician in the troubleshooting of issues and new installations of AC and heat pump systems.
  • Perform a variety of maintenance and repair tasks in the operation of HVAC and Refrigeration systems in commercial buildings.
  • Directed all HVAC and mechanical repair for wheeled vehicles as Lead HVAC Technician at this military installation in Kandahar.
  • Fabricate, service, and install all types of residential, commercial, and industrial HVAC equipment and materials.
  • Monitored and maintained HVAC EMS controls system across multiple platforms to maintain proper cooling levels throughout customer space.

Show More

3. Boilers

high Demand
Here's how Boilers is used in Hvac Technician jobs:
  • Repaired and maintained burners and boilers in residential and commercial locations.
  • Installed and Serviced wood boilers in residential commercial applications.
  • Company specialized in closed loop systems.including boilers Chillers.
  • Maintained and diagnosed residential and commercial boilers.
  • Maintain and repair boilers including installation.
  • Maintained water processing areas including dock areas and doors replacing filters keeping up water softeners, boilers general duties as assigned.
  • Maintain 2-1000 ton chillers and 2-600 ton chillers, 2 gas-fired boilers, cooling towers, pumps and motors, etc.
  • Air handlers, Building automation, Boilers, Steam systems, Chillers, Cooling towers, Energy Team, Electrical, Plumbing
  • Service and Repairs of Commercial Sealed Combustion boilers * Service and Repair of Commercial Steam Boiler for Heating and Process systems.
  • Perform commercial installations of various HVAC related equipment (i.e., air handlers, boilers, chillers, etc.).
  • Serviced and maintained both residential and commercial systems to include chillers, DX systems, boilers, pumps, and controls.
  • Serviced and repaired all HVAC systems including chillers, boilers, air handlers, and pumps; saving 165 contractor hours.
  • Repaired and operate 7 one million BTU hot water boilers for the operations of the restaurants and Casino main floor.
  • Plant Operator - High Pressure boilers, Absorption machines, Screw machines, Cooling towers, and water chemistry analysis.
  • Perform maintenance, inspections and repairs on HVAC equipment including hot water boilers, power humidifiers and refrigeration systems.
  • Analyzed mechanical, electrical, and gas problems in gas-fired furnaces, hot water boilers, and rooftop units.
  • Maintained package units, split systems, boilers, chillers from 25 ton to 100+ ton and geothermal units.
  • Installed, repaired, replaced and serviced a wide variety of heating and cooling systems, chillers and boilers.
  • Maintained, Serviced, Troubleshot, and Repaired Furnaces, Boilers, and Condensers in Commercial and Residential settings.
  • Maintained HVAC equipment, Boilers, Air Compressors, Pumps, Fire Protection equipment and Other equipment as assigned.

Show More

4. Preventative Maintenance

high Demand
Here's how Preventative Maintenance is used in Hvac Technician jobs:
  • Develop work plans for non-routine/emergency/preventative maintenance/Plant outages.
  • Performed one source service and preventative maintenance for correctional facility including all heating and cooling systems and kitchen and laundry equipment.
  • Educated colleagues how to troubleshoot and fix problems increasing their productivity and opportunity for advancement as a preventative maintenance technician.
  • Inspected HVAC systems and their components for the purpose of evaluating condition, identifying necessary repairs and recommending preventative maintenance.
  • Keep personal equipment operating by following operating instructions, maintain supplies, perform preventative maintenance and calling for repairs.
  • Performed preventative maintenance and service on commercial refrigerators and roof top air conditioning units for the Hotel Property.
  • Performed facilities maintenance including preventative maintenance and repair for HVAC plumbing, water purification, and some electrical equipment
  • Perform preventative maintenance; troubleshoot breakdowns and repair malfunctioning HVAC systems/components utilizing measuring and testing of instruments.
  • Provide preventative maintenance by diagnosing equipment malfunction and any operating deficiency to ensure quality work performance.
  • Perform preventative maintenance on all residential heating, air conditioning, and ventilation equipment.
  • Performed troubleshooting, repairs, and preventative maintenance on residential/commercial HVAC and Refrigeration equipment.
  • Utilized customer service and mechanical skills to perform troubleshooting, repair and preventative maintenance.
  • Recognized for efficiency in troubleshooting, diagnosing, repairing and performing preventative maintenance.
  • Set up preventative maintenance programs and documented all activity and repairs to equipment.
  • Execute residential and commercial service and preventative maintenance on heating and cooling systems.
  • Worked on maintaining commercial and industrial accounts in preventative maintenance and emergency settings.
  • Completed preventative maintenance on package and split residential HVAC units and associated equipment.
  • Performed routine preventative maintenance work on commercial and residential mechanical and electrical equipment.
  • Performed bi-monthly preventative maintenance on roof top units, and refrigeration units.
  • Performed inspections and preventative maintenance procedures on air conditioning and refrigeration systems.

Show More

5. Air Ducts

high Demand
Here's how Air Ducts is used in Hvac Technician jobs:
  • Install auxiliary components to heating or cooling equipment, such as, air ducts, pipes, blowers, dampers.
  • Installed HVAC systems according to design specifications and connect systems to water lines, fuel lines and air ducts.
  • Install, modify or repair air ducts, blower coils, drain pans, drain lines and condensing units.
  • Install components to heating-cooling equipment such as registers, air ducts, spiral pipes, and dampers.
  • Experienced in the installation of fuel and water supply lines, air ducts, vents, pumps.
  • Connect systems to fuel and water supply lines, air ducts, and other components.
  • Designed, fabricated, and installed air ducts for residential and commercial applications.
  • Clean air ducts to maximize efficiency and improve indoor air quality.
  • Repaired insulating materials to air ducts and cold storage rooms.
  • Cleaned air ducts, blower wheels, and evaporators.
  • Build air ducts and install air conditioning units
  • Install and repair ducts and trunk lines.
  • Fabricated sheet metal for air ducts.
  • Build & Install Air Ducts Per.
  • Installed air ducts and fans *Installed power wires to the air units
  • Air Duct Tech Clean air ducts demo and install ducts.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Trouble Shooting

high Demand
Here's how Trouble Shooting is used in Hvac Technician jobs:
  • Conducted trouble shooting and maintained inventory.
  • Trouble shooting electrical and refrigeration.
  • Replace, rebuild and repair basic electrical components such as receptacles, ballasts, trouble shooting door systems and alarm systems.
  • Perform Preventive Maintenance, trouble shooting and repair of A/C system such as split type, package type and window type.
  • Dispatched to service calls and homeowner warranty calls, trouble shooting misdiagnosed previous service calls, retro fitting new HVAC equipment.
  • Worked in pharmaceutics trouble shooting doing maintenance and installing chilled water systems, commercial ac systems and refrigeration systems and ice machines
  • Provide commercial and residential HVAC and electrical services, trouble shooting, repair, and installation to home and business owners.
  • Trouble shooting, diagnosing systems, making repairs, communicating with customer from beginning to end and closing out service logs
  • Serviced, repaired and installed residential and commercial heating, cooling and exhaust systems utilizing my trouble shooting skills.
  • Trouble shooting, maintenance, and repair of commercial HVAC & R systems and equipment including chillers and boilers.
  • Provide timely trouble shooting and repair of client equipment to minimize equipment down time and its impact on business.
  • Service and install furnaces and air conditioners, trouble shooting sheet metal working, gas piping and electrical work.
  • Trouble shooting and repair of commercial HVAC equipment including RTAA chillers and Centrifugal Chiller tear down and rebuild.
  • Trouble shooting and repairing HVAC cooling system, Preformed preventative maintenance by taking voltage readings and visual inspections.
  • Experienced in trouble shooting, diagnosing, installing and repairing mechanical, electrical and pneumatic systems & equipment.
  • Maintain and trouble shooting for all HVAC, ice machine and cooler units within the school system.
  • Possess job skills required of electrical, HVAC, brazing & welding, plumbing and trouble shooting.
  • Service, install, trouble shooting, repairs, electrical wiring, change filters, pm units,
  • Help with new unit installs and other components that require trouble shooting to make it work.
  • Trouble shooting, repairs, tune-ups and duct cleaning; data entry and lifted 40-50 lbs.

Show More

7. Furnaces

high Demand
Here's how Furnaces is used in Hvac Technician jobs:
  • Serviced Fireplaces* Serviced Residential/Commercial A/C Units* Serviced Residential/Commercial Furnaces* Installed all HVAC Appliances* Customer Service and Sales* Filed Warranty Information
  • Performed preventive maintenance and routine servicing of residential forced air furnaces and air conditioning equipment.
  • Gained hands on experience repairing and servicing furnaces/air conditioners and quickly developed acute troubleshooting skills.
  • Installed furnaces and air-conditioning units; provided routine maintenance; repaired household appliances.
  • Collected route assignments, repaired/Installed residential and mobile home furnaces and air conditioners.
  • Completed scheduled cleanings and preventive maintenance on air conditioning units and furnaces.
  • Service and repair all manufactured air conditioning units/furnaces both commercial and residential
  • Service on Air Conditioning and FurnacesInstalls on Air Conditioning and Furnaces
  • Serviced and installed residential and light commercial furnaces and air conditioners
  • Performed preventive maintenance on furnaces and air conditioning units.
  • Performed inspections and tune-ups of residential furnaces and air conditioners
  • Serviced mostly residential equipment including some fuel oil furnaces.
  • Assisted in the installation of residential furnaces and air-conditioners.
  • Performed yearly preventive maintenance of furnaces and air conditioners.
  • Installed, maintained and repaired residential air conditioners and furnaces
  • Performed troubleshooting and repair of residential furnaces and air-conditioners.
  • Installed furnaces in commercial and private residences
  • Experience in High Efficient Multi-StageResidential furnaces.
  • Maintain furnaces for optimum heat capability.
  • Installed new furnace and central air systems Repaired heating, cooling and refrigeration systems Installed new duct work Clean and inspect furnaces

Show More

8. Heat Pumps

high Demand
Here's how Heat Pumps is used in Hvac Technician jobs:
  • Serviced and improved operation of 35 packaged unit heat pumps and humidification for electronics manufacturing building.
  • Perform inspection/ service refrigeration equipment including refrigerators, ice machines, gas regulators and heat pumps.
  • Heat Pumps/WSHP Chilled Water Systems, Refrigeration/Commercial Kitchen Equipment
  • Serviced and installed heat pumps, fuel oil furnaces, boilers, Geo-thermal, hybrid, and duel fuel systems.2004 to 2006
  • Diagnosed, quoted, and made reparations to gas furnaces, heat pumps, condensing units, and dual fuel systems.
  • Program included refrigeration, electrical fundamentals, solid state devices, air conditioning systems, heating systems, and heat pumps.
  • Service all makes and models of HVAC equipment- split systems, chillers, package, oil, gas, heat pumps.
  • Maintained and serviced HVAC Heat Pumps for Guest rooms and common areas of Hotel, as well as Residential condo AC.
  • Maintained and repaired air handler, supply fans, exhaust fans, heat pumps and condensing units, and chilled-water systems.
  • Diagnose and repair furnaces, condensers, mini splits, air handlers, heat pumps, swamp coolers in all brands.
  • Provide residential and commercial service on heat pumps, gas pack, split unit, RTU, boilers, chillers and DDC
  • Service and installation of Boilers, A/C, Heat Pumps, Air Handlers, Furnaces, Ductless Units, Duct Work.
  • Started off working with this company at Chattahoochee High School pulling communication wire for about 50 water source heat pumps.
  • Installed various units such as mini splits, roof tops, air handlers, heat pumps, boiler units, etc
  • Install heating and air conditioning units, duct work, through the wall heat pumps, compressors, fan motors.
  • Specialized in commercial rooftop packaged units, split systems, heat pumps, direct and indirect fire make-up air systems.
  • Install, troubleshoot and repair heating, air conditioning and refrigeration units, including chillers, boilers and heat pumps.
  • Installed and services anything from commercial rooftop unitary to residential furnaces, boilers, heat pumps and condensing units.
  • Install commercial and residential air conditioners, furnaces, heat pumps, air handlers including rough-ins and duct work.
  • Job duties include installing and servicing GEO Thermal HVAC systems, as well as air to air heat pumps.

Show More

9. Customer Service

high Demand
Here's how Customer Service is used in Hvac Technician jobs:
  • Provided customer service with installation of heating and air conditioning systems including duct work in residential and commercial.
  • Demonstrated exceptional time management skills, organized and prioritized high volume work orders to ensure excellent customer service.
  • Provide a level of customer service and account management that exceeds expectation resulting in loyal customer/client following.
  • Provided excellent customer service and was consistently a top salesman for new service contracts and installations
  • Perform excellent customer service as well as troubleshooting residential and commercial air conditioner systems.
  • Recognized for excellent customer service on numerous occasions by both supervisors and customers.
  • Delivered outstanding customer service, demonstrated exceptional time management skills and organization.
  • Maintain the highest equipment reliability to ensure excellent customer service and satisfaction.
  • Delivered excellent customer service while maintaining a professional demeanor at all times.
  • Provided customer service, installer of residential heater and air conditioning units.
  • Work daily to ensure outstanding customer service and maintain customer satisfaction.
  • Utilized customer service and mechanical skills to provide outstanding job performance.
  • Provided exceptional customer service to a large property management client base.
  • Experienced professional within customer service, inventory management and HVAC administration.
  • Fielded client questions regarding installation process, providing outstanding customer service.
  • Gained extensive customer service experience and adaptability while in the office.
  • Ensured quality customer service and satisfaction related to the service provided.
  • Performed maintenance on units as needed and provided excellent customer service.
  • Provide quality customer service and receive excellent customer satisfaction feedback.
  • Provided excellent customer service by completing semi-annual preventive maintenance inspections.

Show More

10. Chillers

high Demand
Here's how Chillers is used in Hvac Technician jobs:
  • Overhauled large centrifugal and reciprocating refrigeration compressors, absorption chillers, and related equipment.
  • Provided operating engineering services for central plant with centrifugal and absorption chillers
  • Repair of commercial refrigeration units and chillers.
  • Diagnose, repair and start-up of HVAC Equipment 3-250 Tons, Including Pumps, Chillers, Cooling Towers and related controls.
  • Install & service commercial heat & air conditioners * worked on controls * repaired chillers * 1- Ton - 500 ton Units
  • Reset alarms adjust set points and perform minor maintenance on York, Carrier, and McQuay Chillers ranging from 100-200 tons.
  • Dismantled, repaired, and reassembled units such as pumps, impellers, compressors, chillers, receivers and evaporators.
  • Process all preventive maintenance on all building, fire control, humidification, air compressor, chillers and production systems.
  • Install magnetic-centrifugal chillers, compressors, or related equipment to cool air temperatures through the use of recirculating water.
  • Service and maintain all air handlers, controls and process chillers for the Laboratory and aseptic filling production facility.
  • Repaired, installed and maintained temporary rental chillers, A/C, and heating units for commercial and industrial applications.
  • Installed and maintenance of residential and commercial HVAC systems, including water towers, boilers, and chillers.
  • Clean tubes in chillers, switch out pumps, belts, and make service calls to contracted customers.
  • Helped with the operation and repair of ice machines, chillers, HVAC and several air conditioning units.
  • Service calls of all HVAC, Air Compressor, Chillers and Boiler systems within the installation.
  • Perform preventive and corrective maintenance on chillers, bearing, pumps, shaft alignments and fans.
  • Maintain all refrigeration, heating and air condition equipment to include chillers and cooling tower equipment.
  • Performed repairs and installed commercial chillers (Carrier and Rite Temp) on the base installation.
  • Maintained 2.5- to 15-ton DX/Gas Rooftop units, two 30-ton and one 40-ton York reciprocating chillers.
  • Project lead and designer of retrofitting chillers with remote evaporators for new barracks at Fort Bragg.

Show More

11. Refrigeration Equipment

high Demand
Here's how Refrigeration Equipment is used in Hvac Technician jobs:
  • Maintain environmental conditions by installing and maintaining both heating and cooling systems such as air conditioners, chillers and refrigeration equipment.
  • Conferred with property owners and agents to discuss and approve alteration plans to heating, ventilating, air-conditioning and refrigeration equipment.
  • Installed commercial HVAC and refrigeration equipment and performed testing to ensure operation in accordance with manufacturers' specifications.
  • Performed installation of heating, air conditioning and refrigeration equipment as well as control and distribution systems.
  • Interact with customers concerning major conventions and events and provide the necessary support for refrigeration equipment.
  • Diagnosed, installed and sales on commercial and residential air conditioning and refrigeration equipment.
  • Perform diagnostic service and repairs to residential and commercial HVAC Systems and refrigeration equipment.
  • Performed service and preventive maintenance on commercial and industrial HVAC and refrigeration equipment.
  • Investigated complaints regarding the installation of heating and refrigeration equipment by unlicensed contractors.
  • Provided repair, maintenance, and implementation of refrigeration equipment and air conditioning.
  • Inventoried generators, power distribution, air conditioning, and refrigeration equipment.
  • Install air conditioner and refrigeration equipment and test to ensure proper operation.
  • Installed and serviced central air-conditioning systems and a variety of refrigeration equipment.
  • Serviced commercial and residential heating, air conditioning, and refrigeration equipment.
  • Performed seasonal preventive maintenance on HVAC equipment and commercial kitchen refrigeration equipment
  • Installed and serviced residential HVAC and some small commercial refrigeration equipment.
  • Performed maintenance and service to commercial HVAC and Refrigeration equipment.
  • Conduct preventive maintenance on light commercial HVAC and refrigeration equipment.
  • Install heating/air conditioning/refrigeration equipment and systems mainly in residential units.
  • Service and installation of commercial, residential and refrigeration equipment.

Show More

12. Safety Procedures

high Demand
Here's how Safety Procedures is used in Hvac Technician jobs:
  • Followed all safety procedures with an excellent safety record.
  • Provide quality workmanship and observe all safety procedures.
  • Maintain and troubleshoot safety procedures and regulations.
  • Ensured that maintenance staff followed safety procedures.
  • Adhered to all safety procedures and regulations
  • Experienced in troubleshooting, reading electrical schematics, and using work related safety procedures such as lock out tag out.
  • Complete annual hospital and departmental fire and safety and training and maintains current knowledge of safety procedures.
  • Comply with all safety procedures, policies, and standards while installing HVAC systems and equipment.
  • Follow established safety procedures and techniques to perform job duties, including lifting, and climbing.
  • Utilize strong background in reading and interpreting instruction and safety procedures associated with HVAC processes.
  • Complied with all applicable standards, policies, and procedures, including safety procedures.
  • Instruct assigned personnel on safety procedures and proper use of equipment and tools.
  • Gained more knowledge and experience in safety procedures and hazards avoidance.
  • Charge of a/c units, recovery of refrigerant using safety procedures.
  • Comply with all safety procedures and have no incidents.
  • Followed all standard safety procedures on the worksite.
  • accomplished proper safety procedures as well as apply customer client bonds and trust .

Show More

13. Service Calls

high Demand
Here's how Service Calls is used in Hvac Technician jobs:
  • Travel extensively, responding to service calls and overseeing renovations or new installations.
  • Demonstrated troubleshooting abilities while performing service calls on various units and fixtures.
  • Troubleshooted systems to restore proper functionality, including maintenance service calls.
  • Performed hundreds of residential/commercial service calls with required repairs.
  • Maintain on-call availability for evening and weekend service calls.
  • Responded to service calls on military installation.
  • Execute electrical emergency service calls.
  • Responded to service calls after duty hours to troubleshoot malfunctions with controls and have performed preventive maintenance on these different systems.
  • Worked at various schools throughout the Albuquerque area to answer service calls, and maintain and repair heating and cooling equipment.
  • Handled all low temp and Commercial service calls as well as on call and residential service calls as well as preventive maintenance
  • Maintained all national accounts in South Carolina, performed all service calls and executed all service agreements in the state.
  • Installed Heating and Air conditioning units in new homes, pulled wire, installed duct work, and service calls.
  • Organize call logs, and dispatch mechanics within region to maximize quantity of service calls completed in a business day.
  • Moved to the commercial side of the service department and performed PM's and assisted with repairs and service calls.
  • Respond to residential and light commercial service calls to install and repair various heating, cooling, and plumbing systems.
  • Traveled to several locations for daily service calls, including factories, schools, homes, hospitals and office buildings.
  • Completed residential and commercial plumbing and heating service calls, including demolitions and installation of brand new fire sprinkler systems.
  • Sheet metal fabrication, performed service calls, troubleshooting mechanical problems and repair, electrical work, & plumbing.
  • Oil Burner Tech Job Duties: Annual Tune-ups, Problem solve service calls, installations, Maintenance and cleaning.
  • Coordinate with dispatch department manager and workers to ensure customer repairs and service calls are completed in timely fashion.

Show More

14. Service Tech

high Demand
Here's how Service Tech is used in Hvac Technician jobs:
  • Assisted certified HVAC service technicians in performing service and maintenance of residential and light-commercial air conditioning systems.
  • Trained service technicians and installation mechanics on proper troubleshooting techniques and HVAC equipment installation procedures.
  • Service technician responsible for troubleshooting and repairing residential heating, ventilation and air conditioning systems.
  • Lead service technician servicing and maintaining residential and commercial heating and air-conditioning equipment.
  • Service technician in residential and light commercial equipment including trouble-shooting and start-ups.
  • Service technician and installer of residential heating and air conditioning systems.
  • Gained relevant skills under guidance of Qualified Service Technician during apprenticeship.
  • Recruited directly from Environmental Technical Institute into a Service Technician position.
  • Service technician for residential and commercial accounts plus installation when needed.
  • Service technician servicing commercial heating and air conditioning equipment.
  • Field Service Technician on heating and air conditioning troubleshooting
  • Service technician for Commercial Refrigeration Company.
  • Service technician and installer, salesman
  • Service tech Skills UsedMechanical and electrical
  • Serve as a service technician/owner, installing, service and repair variety of residential and commercial gas and oil equipment.
  • Field service technician specializing in all HVAC's system installation, systems diagnosis, troubleshoot and quarterly preventive maintenance services.
  • Service Tech for Commercial, Residential and most of the Embassies in DC including the Russian embassy for HVAC.
  • Work for multiple companies over the years-mostly commercial service technician in Louisiana, Arkansas, Texas, and Oklahoma.
  • Lead HVAC service tech overseeing multiple Apt complexes providing service advice and making sure other job duties completed.
  • Graduated to head installer and eventually became a service technician after only 2 1/2 years with the company.

Show More

15. Air Handlers

average Demand
Here's how Air Handlers is used in Hvac Technician jobs:
  • Repair heating and air conditioning systems and/or components such as air handlers, fan coils, piping, etc.
  • Installed, re-routed various lengths of PVC in order to provide proper drainage of condensate from air handlers/condensing units.
  • Maintain, balance air flow and take air flow measurements on Plant Air Handlers ranging from 3000cfm to 45,000cfm.
  • Performed preventative maintenance on air handlers, fan coils, fire extinguishers, VAVS, and all HVAC equipment.
  • Service and repair commercial HVAC equipment unit heaters, unit ventilators, air handlers and roof top ventilation units.
  • Up keep and repair of water source systems, air handlers, split systems, and overhead cranes.
  • Maintain and repair rooftop units, VAV systems, air handlers, various ac systems building automation systems.
  • Maintained an RO and RODI system, a PH system for air handlers, and exhaust fume hoods.
  • Checked v-belts, lubricated fan bearings, replaced air filters, and purified media on air handlers.
  • Perform preventative maintenance on air handlers including changing belts, filters and adjusting pressures and temperatures.
  • Assist in the replacement of compressors, evaporator coils, air handlers, and blower motors.
  • Commissioned new air handlers and control systems, in order to meet GMP specifications.
  • Pull old electrical motors from air handlers and vent systems and install new motors.
  • Change Air Filter and do PM service on AC units and Air Handlers.
  • Performed boiler installations, VAV repairs, service air handlers interlocks and controls.
  • Install Condensers and Air handlers in test lab and run test on them.
  • Wire in outdoor units, air handlers, sensors, and thermostats.
  • Synchronized team testing and maintenance of air conditioning units and air handlers.
  • Pulled new low voltage wire for thermostat to air handlers and condensers.
  • Maintained classroom Unit Ventilators, RTU's, and hallway Air Handlers.

Show More

16. Necessary Repairs

average Demand
Here's how Necessary Repairs is used in Hvac Technician jobs:
  • Provided all necessary repairs to residential and commercial customers throughout Houston-Galveston area.
  • Performed necessary repairs of heating and cooling equipment.
  • Test individual components to determine necessary repairs.
  • Quote necessary repairs or recommended upgrades.
  • Perform necessary repairs, including replacement of defrost boards, relays, sequencers, fan motors, blower motors, etc.
  • Respond to high temps, Make necessary repairs to units to get site temperature back to 79 degrees.
  • Perform necessary repairs as needed such as bad wiring, heat strips, replenish refrigerant and install thermostats.
  • Inspect HVAC systems and their components to assess condition, identify necessary repairs and recommend preventive maintenance.
  • Inspect HVAC systems and components to evaluate condition and identifies necessary repairs and makes recommendations.
  • Assessed drain problems and performed necessary repairs.
  • Perform necessary repairs with webcontrols components..

Show More

17. Exhaust Fans

average Demand
Here's how Exhaust Fans is used in Hvac Technician jobs:
  • Performed routine maintenance of exhaust fans and cabinet heaters located throughout facility
  • Serviced and provided technical support for rooftops, air handlers, piping systems, pumps, and exhaust fans.
  • Install and repair all types of restaurant equipment to include kitchen hoods and exhaust fans.
  • Insulated duct work Exhaust fans, dryer vents, brazed in copper pipe.
  • Put together all exhaust pipes and secure them to all exhaust fans.
  • Maintained and repaired exhaust fans in the guest and public space areas.
  • Service Residential and Commercial A/C units, drain lines, exhaust fans.
  • Change out motors and bearings on air handlers and exhaust fans.
  • Serviced HVAC Equipment, Make up air units and exhaust fans.
  • Work on computer systems for commercial building and on exhaust fans.
  • Vented heating systems as well as exhaust fans and dryers.
  • Service and repair of commercial HVAC units and exhaust fans
  • Repaired and maintained exhaust fans and motors.
  • Start up and trouble shoot exhaust fans.
  • Installed and repaired residential exhaust fans.
  • Repair exhaust fans on housing roofs.
  • Repair, Maintain exhaust fans.
  • Exhaust fans repair and maintenance.
  • Run rigid conduit to exhaust fans on the roof top, pull in wires and install devices then termimate them.
  • Performed preventive maintenance on cooling fan units in reactor building Performed preventive maintenance on air handlers and exhaust fans.

Show More

18. Electrical Systems

average Demand
Here's how Electrical Systems is used in Hvac Technician jobs:
  • Design and install electrical systems* Coordinate instillation of new makeup air units in manufacturing plants.
  • Prepared, reviewed and maintained documentation associated with facility electrical systems.
  • Conducted troubleshooting and repair of all associated electrical systems.
  • Repaired and maintained all electrical systems in Federal Building.
  • Maintained and repaired electrical systems and electronic components.
  • Repaired all related piping and electrical systems.
  • Repaired electrical systems and equipment.
  • Served as member of team installing, maintaining and repairing HVAC-R, plumbing and electrical systems in commercial and residential settings.
  • Service install repair HVAC and electrical equipment also installed plumbing repair drywall and carpentry billing platforms for the HVAC and electrical systems
  • Work on electrical systems, to include lighting installation, mechanical connections, power supplies, communications, and security systems.
  • Developed and maintained On-The-Job training requirements which used architect's blue print schematics and wiring diagrams to troubleshoot electrical systems.
  • Repaired and maintained refrigeration and electrical systems and their components, as well as troubleshoot electrical systems and write schematics.
  • Installed, maintained, troubleshoot and repaired heating, air conditioning units, electrical systems and cooling tower.
  • Preformed other duties as requested, such as mechanical, plumbing, electrical systems, grounds and security.
  • JOB RESPONSIBILITIES: Served as member of team maintaining and repairing HVAC, Plumbing and electrical systems.
  • Skilled in the troubleshooting and repair of evaporators, motors, compressors and related electrical systems.
  • Installed and repaired HVAC systems, Fabricated metal ducting Installed gas, plumbing and electrical systems.
  • Maintained electrical systems, plumbing, steam piping, hot water piping, controls and refrigeration.
  • Respond to all complaints regarding air conditioning, heating, refrigeration, and electrical systems.
  • Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures.

Show More

19. Ice Machines

average Demand
Here's how Ice Machines is used in Hvac Technician jobs:
  • Repair and install medium and low temperature refrigeration systems including ice machines.
  • Repair window a/c /split units/electrical repairs/ice machines /painting and pool repairs
  • Diagnose, repair, & install refrigeration units such walk-in coolers & freezers, ice machines, & various refrigerator units.
  • Service of restaurant equipment such as walk-in coolers, freezers, stoves, juice dispensers, ice machines, etc.
  • Maintain and service all the walk-in coolers, freezers, ice machines, shakers and water baths for the labs.
  • Performed scheduled maintenance services and safety evaluations of residential heating and air units, refrigeration, and ice machines.
  • Repair and maintenance of water coolers, ice machines and dehumidifiers were also a part of my duties.
  • Performed repairs on small commercial and domestic refrigerators, freezers, air conditioners, and ice machines.
  • Perform preventative maintenance on ice machines, water softeners, and other equipment associated with Dormitories.
  • Performed PM inspections on commercial and residential HVAC, Refrigeration, Ice Machines and exhaust systems.
  • Diagnose and repair refrigeration, heating, cooling, ice machines, and ventilation as reported.
  • Service, maintain, and repair HVAC equipment and ice machines at 800+ bed hospital.
  • Make rounds checking ice machines, coolers, freezers and 50+ ton ac units.
  • Serviced and repaired commercial gas ovens, freezers, coolers, and ice machines.
  • Worked on ice machines and helped provide healthy, clean ice for students.
  • Fix all types of commercial rooftops, ground units, coolers, ice machines
  • Maintained and repaired reach-in refrigerators, freezers, ice machines, and ovens.
  • Serviced and repaired ice machines, reach-ins, walk-ins, and low temp.
  • Conduct refrigeration maintenance and repair on coolers, freezers, ice machines.
  • Have also worked on restaurant freezers, ice machines and Grill hoods.

Show More

20. Control Systems

average Demand
Here's how Control Systems is used in Hvac Technician jobs:
  • Assist technicians in both installing and repairing industrial, commercial, and residential environmental-control systems.
  • Installed and serviced many types of residential and light commercial environmental control systems.
  • Installed motors, compressors, temperature/humidity control systems, and circulating ventilation fans.
  • Perform residential field installation and commissioning of advanced energy management and control systems.
  • Help interpret mechanical/electrical blueprints, schematics and drawings for environmental control systems.
  • Construct electrical control panels for various HVAC and integrated control systems application.
  • Programmed, troubleshoot, and maintained building management and environmental control systems.
  • Perform adjustments and maintain internal electrical and electronic control systems.
  • Install and service environmental control systems in commercial establishments.
  • Investigated and repaired direct digital and pneumatic control systems.
  • Specialized in Energy Management Control Systems and Preventive Maintenance.
  • Install temperature control systems in residential areas.
  • Operate and repair building automation/control systems.
  • Operate computer automated building control systems.
  • Installed power management control systems.
  • Repair and adjust associated equipment, such as compressors, pumps, ventilating fans, burners and air conditioning control systems.
  • Managed BAS control systems (entered data algorithms and other various commands into the automation system for HVAC operations.)
  • Adjusted and maintained internal electrical and electronic control systems; cleaned coils and blowers and checked motors and belt tensions.
  • Install electric, digital and pneumatic control systems Tested diagnose and repaired problems in the system and propose relevant solutions.
  • Installed, serviced and repaired environmental control systems in residences, department stores, office buildings and commercial establishments.

Show More

21. Hand Tools

average Demand
Here's how Hand Tools is used in Hvac Technician jobs:
  • Operate heavy-duty hand tools and power equipment such as metal grinders, sanders, and other types of heavy-duty hand tools.
  • Lay out and connect electrical wiring between controls and equipment according to the wiring schematic, using electrician's hand tools.
  • Operated hand tools, power tools, gauges and measuring equipment to perform service to the equipment and/or mechanical system.
  • Prepare variety of hand tools, wiring diagrams, piping schemes or engineering specifications, to diagnose and repair units.
  • Used a wide variety of hand tools, welding, brazing and soldering equipment and electrical diagnostic to locate malfunctions.
  • Mount compressor and condenser units on platform or floor, using hand tools, following blue prints or engineering specifications.
  • Adjust functional parts of devices and control instruments, using hand tools, levels, plumb bobs, and straightedges.
  • Operate a variety of equipment such as hand tools, lap top computers and diagnostic hardware to perform work.
  • Lay out and connect electrical wiring between controls and equipment per wiring diagram, using electrician's hand tools.
  • Cut openings in walls and floors to accommodate pipe and/or duct fittings, using hand tools and power tools.
  • Used a variety of hand tools, following blueprints on engineering specifications, to diagnose and repair units.
  • Worked with numerous hand tools in fabrication of metal exhaust ducts, water and gas pipe installation.
  • Use common hand tools, soldering irons and special tools, jigs and fixtures as instructed.
  • General work included hand tools, power tools, and reading of wire diagrams for units.
  • Operated hand tools and meters to diagnosis issues for repair and check gauges for proper functioning.
  • Utilized various hand tools, followed blueprints and inspected and replaced filter belts as needed.
  • Adjust system controls to setting recommenced by manufacture to balance system, using hand tools.
  • Repaired broken parts, using brazing, soldering, and welding equipment and hand tools.
  • Meter, gauges, all hand tools used in HVAC lines of repair and maintenance.
  • Utilize hand tools, gauges, and testing instruments, documented all maintenance and repairs.

Show More

22. New Construction

average Demand
Here's how New Construction is used in Hvac Technician jobs:
  • Performed installations on new construction and replacement HVAC equipment.
  • Collaborate with engineers to plan new construction and overhaul programs, including the allocation of manpower, resources, and budgets.
  • Performed HVAC related servicing and installation for commercial and residential construction projects, including new construction, retrofits, and remodels.
  • Perform installs, maintenance, new construction and retrofits as well as diagnostic and repairs to residential and commercial HVAC systems
  • Install, connect, troubleshoot and repair, test and operate HVAC systems in residential and new construction homes.
  • Completed multiple new construction and tenant improvement projects at hospitals, hotels, office buildings and television studios throughout South
  • Installed freezers and repaired and replaced defective equipment, components, and wiring in new construction and renovation projects.
  • Installed HVAC equipment in new construction and also system change outs for customers who wanted to upgrade their system.
  • Perform customer service maintenance for Air conditioning units, Started Up All New A/C Units in new constructions Housing Developments
  • Installed everything that has to do with Residential HVAC systems, Warranty work, Demolition and New Construction.
  • Designed, Ordered, fabricated, and installed P3 duct work and all new construction HVAC jobs.
  • Performed installation for commercial construction projects, including new construction, retrofits, remodels and plant expansions.
  • Worked in a construction like industry, dealt with new construction, modeled homes and service calls.
  • Designed and installed residential HVAC systems for new construction and renovations, serviced all residential HVAC systems.
  • Installed HVAC systems and duct work for residential (new construction & existing) work sites.
  • Managed all electrical projects such as (wiring of new construction and repairing/serving existing wiring).
  • Diagnosed and repaired residential HVAC systems, Also installed residential HVAC systems; primarily new construction.
  • Install duct work flexible and metal in commercial tenant improvements and residential new construction and remodels.
  • Worked with installs for new construction as well as updating existing warehouse and office spaces.
  • Complete heating and cooling systems in new construction homes and as well as renovated homes.

Show More

23. Trane

average Demand
Here's how Trane is used in Hvac Technician jobs:
  • Service AC units, walk in coolers/freezers, ice machines, trane rooftop units and natural gas/propane units.
  • Service and repair control systems such as Trane, Carrier, Lon spec, Siemens, And Delta.
  • Continued further education by attending designated class provided through the manufacturers such as Trane and Carrier.
  • Have the opportunity to travel to La cross Wisconsin, for a training at Trane facilities.
  • Performed complete maintenance and service of Trane equipment at most major industrial sites including W.L.
  • Resolved temperature complaint calls through front end such as Trane Summit and Automated Logic software.
  • Installed and troubleshooted split system Trane and Goodman units for two 90 unit apartment buildings.
  • Monitored and maintained Trane chiller plant including systems loop for chilled water and cooling tower.
  • Major manufactures include Bryant/Carrier, Trane, and Dunkirk but service included all brands.
  • Manufactured from Climate Master and Florida Heat Pump, Trane and many others.
  • Installed and serviced different types of systems from Trane to Goodman to Carrier.
  • Maintain and repair HVAC pneumatic/DDC (Trane Tracer Summit system) operation.
  • Performed Trane factory service and maintenance on commercial and government contracts.
  • Performed maintenance on Carrier, Kenmore, and Trane systems
  • Serviced and repaired all types of Trane commercial equipment.
  • Maintain and repair one Trane RTAA-140 rotary chiller.
  • Program and maintain Honeywell and Trane software.
  • Promoted Trane heating and air conditioning equipment.
  • Worked with Trane Tracer and Tracker.
  • Experience with Trane McQuay and.

Show More

24. VAV

average Demand
Here's how VAV is used in Hvac Technician jobs:
  • Worked on construction sites starting VAV boxes with hot and chill water valves to coils.
  • Check blueprints for accuracy of dampers and VAV s. Sealed the ducts as required.
  • Heat Pump, Pneumatic controls, VAV Controls, preventive maintenance.
  • Replace blower motors and associated controls on VAV air distribution system.
  • Work on Fan coil units, VAV and rooftop systems.
  • Designed and installed Carrier VAV systems for office buildings.
  • Service and Repair VAV units and Chill Water system.
  • Experience with VAV and fan powered boxes..
  • Experience with VAV and Zoning.
  • Start up of RTU and VAV systems.
  • Service VAV & Fan Power boxes.
  • Maintained chilled water plants, VAV systems, split systems, switch gear, generators, and UPS systems.
  • Acquired knowledge in installation of duct work, VAVs, smoke detectors, etc.
  • Installed control boxes/vav's, dampers, drainpipes, and furnace casings.
  • Set VAV boxes using laptop programs and balance pumps for hydronic systems
  • Sheet metal installation, tenant improvements , VAV box installation.
  • Service and maintenance of vav and fan powered boxes.
  • Ice machines vav's and refrigeration.
  • Service and repair of RTU's, AHU's, VAV's, and FPB's Preventive Maintenance on all HVAC equipment
  • Lay out, install hangers, pipe, vav boxes, fan coils, radiant panels etc.

Show More

25. Job Site

average Demand
Here's how Job Site is used in Hvac Technician jobs:
  • Managed job sites through constant communication with general contractors and both residential and commercial customers.
  • Overlooked subcontracted job sites inside airport facility.
  • Pick up/Order parts for certain job sites, help technicians on the job site, preform normal duties for HVAC services.
  • Traveled to job sites and worked with company dispatch to ensure schedule was maintained and delays properly communicated to the customer.
  • Major job sites including Apple Campus, Sacramento Kings Arena, Candlestick Park, Many Hospitals around the Bay Area.
  • Drive company van abiding every road law, sustain a clean driving record and arrive to each job site punctually.
  • Transport a variety of tools, equipment and supplies to ensure the availability of materials required at job site.
  • Stayed ahead of the work schedule and worked well with the other trades concurrently on the job site.
  • Trusted to be left alone on job sites to continue, finish, and check the heating systems.
  • Communicated directly with the job site Superintendent when completing the final touches and fixes prior to final inspections.
  • Drive company van to service area, Understand company pricing and generate appropriate customer invoice at job site.
  • Travel to job sites and install and maintain heating, ventilation and cooling units for commercial contracted stores.
  • Travel to job sites for service calls, working directly with Service Manager to ensure customer satisfaction.
  • Fill out invoices, clean up job site, drive company van to and from job.
  • Transported materials and tools to the job site and provides proper accounting of tools and materials.
  • Transported, arranged, and stored job site raw materials, tools, and equipment.
  • Check shipments against the manifest that we receive from supplier at each job site.
  • Fill out service paper work, job site inventory and estimates when needed.
  • Clean up at job site completion Accomplishments Customer Service/Sales : Heavy Equipment Safety Standards
  • Traveled more than 5 miles to job sites on a regular basis.

Show More

26. Roof Top Units

average Demand
Here's how Roof Top Units is used in Hvac Technician jobs:
  • Performed monthly inspections on all equipment to include PTAC units, split systems, roof top units, boilers and chillers.
  • Service roof top units, boilers, exhaust fan, plumbing, electrical and general building maintenance for four building campus
  • Serve as a service technician installing repairing roof top units and split system unit and exhaust fans.
  • Maintained and troubleshot all HVAC roof top units, chillers, cooling towers, and air handlers.
  • Replaced all types of HVAC equipment, roof top units, split systems, air handlers.
  • Worked on HVAC systems such as Roof top units, makeup air, and exhausts.
  • Perform preventive maintenance checks and cleaning of 5 - 50 ton roof top units.
  • Worked on boilers, chillers, roof top units, and used hazardous materials
  • Installed and repaired furnaces, air conditioners, roof top units, and boilers
  • Assisted in repairing, replacing and installing roof top units, split systems etc
  • Repaired roof top units, charged units with refrigerant and troubleshot controls.
  • Replace air filters in roof top units and air handling units.
  • Repair and replace commercial roof top units as required.
  • Worked installing hurricane rated HVAC or roof top units.
  • Repair and maintenance of commercial roof top units.
  • Installed new roof top units with proper ducting.
  • Installed commercial roof top units.
  • Operate and control 15 ninety ton Trane roof top units and many other smaller units with HAVEL BMS.
  • Freeze dryer, roof top units, chillers, glycol system, air handlers,
  • Received on the job training working with Trane and Carrier roof top units.

Show More

27. Hvac/R

average Demand
Here's how Hvac/R is used in Hvac Technician jobs:
  • General experience in preventive maintenance of HVAC/Refrigeration equipment as well as troubleshooting of mechanical and electrical problems.
  • Performed corrective repairs on HVAC/Refrigeration and associated equipment for both commercial and residential properties.
  • Provided HVAC/R service with specific responsibility for identifying repair and/or replacement needs.
  • General maintenance to HVAC/R retrofits electrical updates and generator repair and maintenance.
  • Completed preventive maintenance work on HVAC/Refrigeration and associated equipment.
  • Performed corrective repairs on HVAC/Refrigeration and associated systems.
  • Demonstrate ability to diagnose, inspect, adjust, repair, replace and perform preventive maintenance of HVAC/R equipment and controls.
  • Service tech for commercial HVAC/refrigeration company* Duties range from 80% service to 20% installation of commercial HVAC/refrigeration and boilers.
  • Performed preventive maintenance, troubleshoot breakdowns, and repair malfunctioning HVAC/R systems and components; utilizing measuring and testing instruments.
  • Repair and maintain all HVAC/R controls, including air compressors and air dryers which include pneumatic, electrical and electronic.
  • Lead Installation Technician for service and maintenance of commercial HVAC/R systems, energy management systems, and DDC.
  • Perform skilled work in the inspection, installation, maintenance, adjustment, and replacement of HVAC/R systems.
  • Install, test, maintain, troubleshoot, and repair HVAC/R components, equipment, and controls.
  • Service Tech - I mostly run HVAC/R service calls for Insight on Commercial and Industrial accounts.
  • Develop and Perform planning activities and advised on problems installing and repairing HVAC/R equipment and systems.
  • Skilled in maintaining difficult balances of a variety of HVAC/R controls and complicated motor controls.
  • Provide preventive maintenance and repairs on commercial HVAC/R systems in a professional and courteous manner.
  • Plan and execute the installation of HVAC/R equipment in commercial settings from A to Z.
  • Checked wiring diagrams, blueprints and piping schemes to diagnose and repair HVAC/R units.
  • Repair, installations and maintenance of HVAC/Refrigeration, kitchen equipment, power plant operations.

Show More

28. Circuit Breakers

average Demand
Here's how Circuit Breakers is used in Hvac Technician jobs:
  • Repair transportation vehicle systems including circuit breakers, modules, switches, motors, electrical fuses, alternators, and batteries.
  • Passed electrical wire through conduit, spliced wire connections, taped wire, & installed circuit breakers.
  • Install new thermostats, circuit breakers and panel boxes.
  • Tested circuit breakers and power transformers prior to installation.
  • Install electrical outlets, lighting and circuit breakers.
  • Installed circuit breakers in the new homes.
  • Change circuit breakers and run electrical wires.
  • Replace circuit breakers,light switches,photo cell.

Show More

29. New Equipment

average Demand
Here's how New Equipment is used in Hvac Technician jobs:
  • Serviced and Maintained A/C equipment Troubleshoot and Repaired A/C equipment Installation of new equipment
  • Communicate with customers with information and training on operating new equipment.
  • Provide customers with new equipment replacement options.
  • Generated new business and growth of existing accounts by recommending new equipment or services meeting the needs of customers.
  • Service and repair heating and cooling equipment, sales of new equipment (residential and commercial).
  • Educated customers in the proper usage of existing HVAC equipment and recommended new equipment where needed.
  • Recommended and sold various indoor air quality products as well as recommended and selling new equipment.
  • Started up new equipment and repaired air conditioning systems which included light commercial and residential.
  • Installed new equipment for customers when equipment was costly to repair or not energy efficient.
  • Conduct complete system evaluation to give customer best and most affordable options on new equipment.
  • Referred customer to sales team member when needing new equipment and would set up appointment.
  • Installed new equipment and tested the operations to make sure everything is functioning properly.
  • Serviced, repaired or install new equipment as seen fit to customers' needs.
  • Collaborate with engineers and contractors on the installation of new equipment and upgrades.
  • Perform maintenance repair on current HVAC equipment and install new equipment as needed.
  • Worked with sales engineers on selling new equipment and getting potential new sales.
  • Tear out old equipment and replace with new equipment a/c and furnace.
  • Inspect ducts and vents, clean A/C coils and install new equipment.
  • Install of new equipment to include electrical wiring, plumbing, ventilation.
  • Coordinated the installation of new equipment with various facilities on the base.

Show More

30. Water Heaters

low Demand
Here's how Water Heaters is used in Hvac Technician jobs:
  • Repaired hot water heaters for commercial and residential customers.
  • Light plumbing repairs including installation of dishwashers, sinks, toilets, well pumps, and water heaters of all types.
  • Maintained boilers, water heaters, and steam heating systems * Preventive maintenance on all associated HVAC equipment * Repaired system problems
  • Assisted in repairs of water heaters and water boiler systems, and gained entry level knowledge in HVAC repair and troubleshooting.
  • Service, repair and replacement of light commercial & residential heating/air conditioning unit, high efficiency boilers and water heaters.
  • Install of energy efficient furnaces, energy efficient stoves, energy efficient water heaters, and energy efficient exhaust systems.
  • Complete work orders and maximize performance in Air Conditioning, water heaters, dishwashers, disposers, stove, refrigerator.
  • Installed boilers, furnaces & water heaters within a strict ETA to satisfy customers in need & contract regulations.
  • Repair and Installation of A/C, Furnaces, Boilers, Water Heaters, Thermostats, Humidifiers, Duct Work.
  • Perform repairs, maintenance, and installation on AC units; install light fixtures, appliances and water heaters.
  • Assist certified plumber with basic plumbing such as removal and replacement of sinks, toilets and water heaters.
  • Serviced commercial/residential heating/cooling systems, leak checked water and gas lines, installed and serviced water heaters.
  • Installed, serviced, and maintained residential and commercial water heaters, and kitchen exhaust hood fans.
  • Assess and repair water heaters using volt meter, water pressure gauge, and a combustion analyzer.
  • Provide service on domestic refrigerators, water softeners, water heaters, service maintenance on assigned contracts.
  • Installed boilers, water heaters, indirect hot water heaters, hot water packs and oil tanks.
  • Serviced and installed many types of water heaters and heating and cooling systems in customers homes.
  • Installed boilers, hot water heaters, water purifiers, humidifiers, and forced hot-air systems.
  • Serviced, installed and repaired furnaces, condensers, boilers, water heaters and chillers.
  • Cleaned and checked furnaces, gas hot water heaters, boilers, and air ducts.

Show More

31. Mechanical Equipment

low Demand
Here's how Mechanical Equipment is used in Hvac Technician jobs:
  • Specialized in independent commercial client and critical facilities solutions to maintain reliable and efficient operation of mechanical equipment and systems.
  • Maintained an effective preventive maintenance program for all existing HVAC and mechanical equipment for commercial accounts.
  • Investigated problems and performed repairs on various mechanical equipment in heating, cooling and ventilation systems.
  • Collaborate on larger new construction jobs to install mechanical equipment.
  • Managed 1.2-million-square-foot Corporate Headquarters HVAC and mechanical equipment facility.
  • Performed service on mechanical equipment and pneumatic/DDC controls.
  • Performed preventative maintenance on various building mechanical equipment.
  • Monitor and test the mechanical equipment after installation.
  • Performed maintenance on hydraulic and mechanical equipment.
  • Provide preventative maintenance on all mechanical equipment.
  • Service and repair of building mechanical equipment
  • Perform repair and maintenance on boilers, chillers, air handlers, and all building related mechanical equipment throughout the district.
  • Service mechanical equipment, perform periodic maintenance for service contracts, evaluate installed systems for operational problems and correct said issues.
  • Installed, repaired, and maintained rooftop units, split systems, VAV boxes, controls, and other mechanical equipment.
  • Installed, repaired, maintained and sold rooftop units, split systems, boilers and other mechanical equipment.
  • Performed work to keep machines, mechanical equipment, and the structure of an establishment in repair.
  • Install, repair, and maintain units, boilers, controls, and other mechanical equipment.
  • Serve as a senior mechanic performing service and maintenance of HVACR Systems, boilers and mechanical equipment
  • Utilize LOTO (Lock-out Tag-out) procedures on all electrical panels and mechanical equipment.
  • Key responsibilities: Maintaining, diagnosing & repairing multiple types of mechanical equipment.

Show More

32. General Maintenance

low Demand
Here's how General Maintenance is used in Hvac Technician jobs:
  • General maintenance on HVAC and refrigerated systems Diagnosing problems Ordering and installation of new parts Removal and installation of new equipment
  • Directed and participated in preventive and corrective maintenance and general maintenance and installation of HVAC systems.
  • Recommended, developed, and performed preventive and general maintenance procedures.
  • Provided general maintenance/troubleshooting for service contracts and repair calls.
  • Perform general maintenance on residential and commercial equipment.
  • Assisted with general maintenance of resort properties
  • Performed electrical and general maintenance.
  • General maintenance of facility equipment.
  • Performed preventative and general maintenance.
  • Perform preventive or general maintenance procedures, such as cleaning, power-washing, testing electrical components, and changing filters.
  • Maintain grounds, pool area, and all 112 apartments A/C and Heating needs along with general maintenance problems.
  • Handled the service requests and general maintenance requests for an apartment community, including apartment prep (punch-out).
  • Perform general maintenance on equipment rooms; paint equipment as necessary to maintain a clean and safe environment.
  • Test circuits, repaired leaks, replaced belts and filters, lubricated bearings, and general maintenance.
  • Perform minor Plumbing, Electrical, Carpentry, Painting, and General Maintenance duties as needed.
  • Direct, facility, life safety systems, electricians, HVAC, and general maintenance technicians.
  • General maintenance in plumbing, such as install and maintain piping systems and their fixtures.
  • Performed general maintenance and corrective repair of buildings, industrial systems, equipment and grounds.
  • Perform general maintenance including light ballast and bulbs, switches, receptacles, and wiring.
  • Perform general maintenance on heating and air units within the compound * Troubleshoot HVAC issues

Show More

33. Company Vehicle

low Demand
Here's how Company Vehicle is used in Hvac Technician jobs:
  • Maintain good working order of company vehicle including refueling as necessary, also reporting mechanical issues.
  • Maintained a professional appearance and was responsible for company vehicle.
  • Maintained inventory and material on company vehicle.
  • Assume responsibility of company vehicle maintenance.
  • Maintain cleanliness of assigned company vehicle.
  • Performed all work to ensure local codes were met and followed safety rules enforced by OSHA, maintained company vehicle.
  • Take home a company vehicle daily in order to respond to after hour emergency call when I'm on call.
  • Maintained proper stock, parts, tools and equipment in company vehicle and placed orders for re-supply when appropriate.
  • Obtained a company vehicle and performed required duties based on a daily route and schedule given by a dispatcher.
  • Managed company vehicle, mileage records, GPS, cell phone and time sheets without incident or reprimand.
  • Maintain company vehicle, tools and equipment for the purpose of ensuring the availability in safe operating condition.
  • Replaced motors, transmissions, break jobs, oil changes, and all major repairs on company vehicles
  • Provided superior customer service, received on-site payment collection, and managed daily care of company vehicle.
  • Maintained all materials, inventory, and company vehicle in compliance of the company's policies.
  • Installed 410 Units, Used Company vehicles to do calls of both residential and commercial.
  • Maintained proper stock, parts, tools, and safety equipment in all company vehicles.
  • Inventory maintenance Accounts payable/ accounts receivable Company vehicle service, maintenance and record upkeep.
  • Assigned a company vehicle, company gas card, and company cell for service.
  • Maintain company vehicle, cleanliness and parts stocked in accordance with company handbook.
  • Maintain a fully stocked company vehicle with tools valued at approximately $15,000.

Show More

34. Evaporator Coils

low Demand
Here's how Evaporator Coils is used in Hvac Technician jobs:
  • Replaced evaporator coils, condensing units, compressors as well as various electrical and mechanical components.
  • Repaired and reassembled units such as pumps, impellers, chiller barrels and components, compressors, and evaporator coils.
  • Modify and install all aspects A/C systems to include condensers, evaporator coils, compressors, fan motors and thermostats.
  • Clean condenser & evaporator coils, flush drain lines, change filters, adjust / change belts on motors.
  • Installed condenser units, remove, and installed evaporator coils, compressors and fan motors.
  • Clean evaporator coils, to ensure system is working properly and at maximum potential.
  • Installed/repaired evaporator coils, condenser coils, timers, switches, controls and components.
  • Supported team members in installation of compressors, evaporator coils, and condenser units.
  • Installed compressors, evaporator coils, temperature controls, ducts and piping.
  • Have performed deep cleaning on evaporator coils and blower motors.
  • Inspected condenser and evaporator coils for cleanliness and airflow.
  • Installed new evaporator coils in freezer boxes.
  • Replace condenser, furnace and evaporator coils.
  • Checked for leaks, cleaned evaporator coils.
  • Changed condenser coils and evaporator coils.
  • Painted condenser coils and evaporator coils.
  • Installed and braised evaporator coils from two ton to five ton equipment.
  • Installed and replaced various motors and compressors Pressure washed condenser and evaporator coils Type III universal certification and EPA certified M

Show More

35. Defective Equipment

low Demand
Here's how Defective Equipment is used in Hvac Technician jobs:
  • Disassembled broken and defective equipment to facilitate repairs, reassembly and commissioning of systems.
  • Diagnosed and replaced defective equipment, recommended energy efficient upgrades to outdated systems.
  • Repaired/replaced defective equipment, components or wiring and tested equipment following repairs.
  • Repaired and replaced defective equipment and wiring.
  • Upgraded and replaced defective equipment.
  • Disassemble broken or defective equipment to facilitate repair and reassemble equipment when repairs are complete.
  • Repaired and/or replaced defective equipment, components, and/or wiring as needed.
  • Inspected drives, motors, and belts and repaired defective equipment parts.
  • Repaired and replaced defective equipment, components, and wiring Adjusted system controls to setting recommended by manufacturer.
  • Repair or replace defective equipment, components, or wiring.Test electrical circuits and components for continuity, using electrical test equipment.
  • Test electrical circuits or componts defective equipment.

Show More

36. Freon

low Demand
Here's how Freon is used in Hvac Technician jobs:
  • Handled information gathering for company on the upcoming HVAC Freon recovery and certification laws
  • Recovered Freon and checked vacuum-pressurized refrigeration lines with nitrogen gas.
  • Supervised the installation of HVAC units with cranes and helicopters, charged, vacuumed and reclaimed Freon on start up.
  • Repaired walk in freezer, cooler, ice machines, changed compressor, and recharged Freon.
  • Locate and fix problems with residential A/c units, charge systems with Freon, install new equipment
  • Maintain Freon dispensing record to meet Federal Requirement and maintains inventory parts, Freon and supply.
  • Check pressures and recover and install Freon 22 and R410A in accordance with EPA standards.
  • Installed and repaired HVAC equipment- Experience with electrical wiring- EPA certified to handle residential Freon
  • Maintain, safely and correctly, Freon and hazardous gases according to EPA regulation.
  • Replace PVC, replace fan motor, mini split cleaning, and replace Freon.
  • Check for proper refrigerant (Freon) levels to maintain efficiency of appliances.
  • Charge systems and read gauges to ensure that the Freon levels are correct.
  • Charge units using scale to weigh in the right amount of Freon.
  • Leak check, reclaim, repair and charge various Freon systems.
  • Recover Freon, charge Freon, vacuum system etc.
  • Charged, repaired and recovered Freon based systems.
  • Repair mechanical systems and replace Freon when needed.
  • Deal with refrigerant and Freon gas.
  • Charged air conditioning systems with Freon.
  • Weighed and added Freon gases.

Show More

37. Water Systems

low Demand
Here's how Water Systems is used in Hvac Technician jobs:
  • Fabricate piping per mechanical drawings for chilled water systems
  • Experience in the design and building of electrical controls used in everything from oil well production to public water systems.
  • Maintain and repair diversified medium to large tonnage DX and chilled water systems as well as controls for such applications
  • Install new or upgrade existing HVAC & PV and Solar Hot Water systems to achieve energy conservation goals.
  • Maintain and operate a variety of HVAC systems from small unit heaters to large chilled water systems.
  • Installed complete plumbing systems from rough-in stage to final trim-out including sewer and potable water systems.
  • Inspect, diagnose, and repair chill water systems, pumps and control valves.
  • Experienced pipe fitter for steam, hot, chilled and waste water systems.
  • Maintain operation logs and chemical for open and closed loop water systems.
  • Brazed unions and made repairs on chill water systems and refrigerant systems.
  • Diagnosed everything from dc window units to 100t chill water systems.
  • Installed sewer and water systems in new residential and commercial buildings.
  • Install and replaced copper domestic heating water systems.
  • Design and installation of Solar Hot Water systems.
  • Installed piping of refrigeration and water systems.
  • Worked on boiler and chilled water systems.
  • Experience installing air and water systems.
  • Assist on chill water systems.
  • Diagnosed and Repaired Commercial HVAC Systems including Split-Systems, Packaged Units, Hydronic Heating Systems and Domestic Hot Water Systems.
  • Install, remove and repair circulator pumps for chill water and hot water systems.

Show More

38. Proper Operation

low Demand
Here's how Proper Operation is used in Hvac Technician jobs:
  • Charged refrigeration systems with refrigerant and checked for proper operation; and programmed associated control systems.
  • Repaired, maintained and installed commercial and residential systems and tested for proper operation.
  • Repaired/replaced parts or units as needed and adjusted system components for proper operation.
  • Inspected actuators on dormitory heating and cooling units to ensure proper operation.
  • Replace and calibrate pneumatic thermostats and components for proper operation.
  • Maintained proper operation of air conditioning units.
  • Installed heating and air conditions units and tested them for proper operation Install piping systems, fittings, valves and appliances.
  • Performed upgrades and updates required for proper operation of heating and air conditioning systems in various passenger train car models.
  • Perform bi-annual service and maintenance on customers residential HVAC systems to ensure proper operation during heating and cooling seasons.
  • Maintained accurate logs of the equipment in the area to insure proper operation and maintenance of this equipment.
  • Monitor and ensure proper operation of critical AC systems on the server, data, and lab areas.
  • Performed air balancing, adjustment, calibration and checking operations to assure proper operation of HVAC systems.
  • Test document ohms, current, voltage, and proper operation of refrigeration and mechanical product.
  • Communicate to the consumer on the proper operation and owner's maintenance of the installed equipment.
  • Charged system checked for proper operation and make proper adjustment to system for design BTU.
  • Communicate with consumer regarding the proper operation and owner s maintenance of the installed equipment.
  • Assisted in periodic performance checks of heating and cooling systems to ensure proper operation.
  • Conduct smoke tests, to confirm proper operation of fire & smoke sensors.
  • Reviewed technical spec to ensure proper operation and performance of HVAC systems.
  • Observe pressure and vacuum gauges and adjust controls to insure proper operation.

Show More

39. Air Compressors

low Demand
Here's how Air Compressors is used in Hvac Technician jobs:
  • Maintained AC systems, water-cooling towers/circulating equipment, air compressors including safety controls.
  • Performed maintenance of vibration monitor equipment on plant air compressors.
  • Maintain and repair diesel engines that operate our generators and air compressors, up to 16 cylinder diesel engines.
  • Examined heating, air conditioning and air compressors for any signs of defects or malfunctions.
  • Repair Control Systems, pneumatic and electric, repair air compressors and vacuum pumps.
  • Perform scheduled preventive maintenance on air compressors and pumps.
  • Install, replace, and repair compressors and coils.
  • Serviced all vacuum pumps and controlled air compressors.
  • Air compressors and pneumatic controls.
  • Maintain and service air compressors.
  • Service and install air compressors.
  • included maintenance and repair on packaged equipment, air handlers, and air compressors.
  • Work also included water pumps, air compressorsystems, and VAV boxes.
  • Maintain and repair air compressors up to 1500 cfm.
  • Machine Repair Technician 2 / HVAC Technician Installation repair & maintenance of production equipment, air compressors and hydraulic systems.
  • Ice machines.Air profiling.Water balancing ..Kobleco oil free air compressors.

Show More

40. Kitchen Equipment

low Demand
Here's how Kitchen Equipment is used in Hvac Technician jobs:
  • Repair and maintenance commercial air condition refrigeration and kitchen equipment.
  • Maintained and repaired non- electric kitchen equipment.
  • Serviced HVAC equipment and kitchen equipment
  • Key Responsibilities: Maintain HVAC equipment, boilers, kitchen equipment, and some electrical duties in assigned academic buildings.
  • Provide service to Heating, Refrigeration, Air Conditioning, Plumbing, Electrical, Lightning and kitchen equipment.
  • Performed all maintenance on HVAC, refrigeration, ice machines, and kitchen equipment for national accounts.
  • Repair and maintenance of various heating and air conditioning systems as well as kitchen equipment.
  • Hook -up electrical and piping for commercial grade kitchen equipment and fire suppression equipment.
  • Performed service on heating, air conditioning, refrigeration and commercial kitchen equipment.
  • Worked on and maintained all county kitchen equipment and was backup supervisor.
  • Work on kitchen equipment, hood systems walk-in coolers, walk-in freezers.
  • Trouble shoot and repair various types of HVAC equipment and kitchen equipment
  • Light plumbing: Copper brazing on restrooms and kitchen equipment.
  • Repair, service and maintain AHU Units and kitchen equipment.
  • Serviced and maintained all brands of commercial kitchen equipment.
  • Maintain kitchen equipment and Class A property corporate headquarters.
  • Repair all HVAC equipment, kitchen equipment.
  • Serviced residential and commercial HVAC systems Serviced commercial kitchen equipment
  • Repair and maintenance of commercial kitchen equipment-Follow EPA standards for handling refrigerant-Repair food service equipment including ovens, fryers, dishmachines,
  • Maintain and repairs Carrier Transicold reefer and all freezer walk in/ chillers and kitchen equipment, laundry equipment.

Show More

41. DDC

low Demand
Here's how DDC is used in Hvac Technician jobs:
  • Used PLC and DDC programs, schematics and blueprints to work on single-phase, three-phase, and AC/DC electrical circuits.
  • Maintain, repair, replace and assist with all DDC building controls including fire systems.
  • Inspected Air Handler Units and maintained 73degree temperature using DDC controls throughout building.
  • Perform Preventative Maintenance & Repairs to HVAC Systems including pneumatic and DDC controls.
  • Respond to temperature control calls using DDC and
  • Build DDC, relay, and pneumatic control panels from schematics.
  • Perform shift monitoring 24/7 of DDC control system for alarm conditions.
  • Serviced, installed, and calibrated pneumatic and DDC controls.
  • Serviced electrical, pneumatic, mechanical and DDC controls.
  • Maintain building energy management systems, DDC and pneumatic.
  • Serviced and maintained York ISN DDC systems.
  • Worked with DDC and pneumatic controls.
  • Monitored, maintenance DDC system.
  • Maintain DDC & Pneumatic Controls.
  • Monitor and maintain DDCbuilding automation system.
  • Trained and implemented the programing and execution of DDC and PLC systems for heating and air condition for commercial applications.
  • Constructed, installed and programmed DDC control panel for the FAA Radar site at Lahm Air Force Base.
  • list all forms of DDC, electronic, electric and pneumatic control panels across the state of Alaska.
  • Service, installation and maintenance of commercial air conditioning and heating equipment.Installation and service of DDC.
  • Perform service and maintenance on commercial HVAC systems and controls.Installation of DDC systems.

Show More

42. Osha

low Demand
Here's how Osha is used in Hvac Technician jobs:
  • Comply with Miller-Coors safety and environmental regulatory standards and procedures in addition to OSHA and EPA requirements
  • Well-versed in OSHA standards and policies pertaining to work-site safety, in addition to demonstrating superior workmanship according to BBI standard.
  • Promote safe working conditions in accordance with OSHA, EPA and other required regulations dealing with safe operation of all equipment.
  • Follow all OSHA Standards along with State and Local Standards to install and maintain fire sprinkler systems.
  • Explain more when asked Skills Used Following EPA guide lines and safety following OSHA guide lines.
  • Repair commercial fryers, walk-in cooler, and freezers to meet OSHA and government regulations.
  • Experience in the use of various power tools, lifts, and OSHA regulations.
  • Remain aware of and enact EPA, OSHA, and safety guidelines as required.
  • Applied OSHA and EPA requirements and prepared documents to support permit and inspection process.
  • Received universal CFC certification and OSHA 10 card, as well as S.T.A.R.
  • Follow all OSHA safety standards to ensure the safety of my crew.
  • Provided quality control ensuring all were OSHA compliant and met federal regulations.
  • Ensured all workers understood and complied with current safety and OSHA standards.
  • Orientated new recruits and followed OSHA regulations, while providing service.
  • Adhere to all work safety policies and procedures including OSHA requirements.
  • Comply with all EPA, OSHA and company safety regulations.
  • Received training on safety, fork lift, OSHA 30.
  • Follow all safety rules and regulations as required by OSHA.
  • Implemented a safety program to comply with OSHA regulations.
  • Conducted training on daily operations and OSHA regulations.

Show More

43. Air-Conditioning Systems

low Demand
Here's how Air-Conditioning Systems is used in Hvac Technician jobs:
  • Examine heating, refrigeration and air-conditioning systems for signs of defects or malfunction Serviced electrical, and mechanical controls.
  • Removed and installed various residential and commercial heating and air-conditioning systems and supervised 1-3 employees.
  • Perform initial start-up of newly installed residential and commercial heating and air-conditioning systems.
  • Service repairs on major hotel chain air-conditioning systems, refrigeration and residential equipment
  • Install commercial grade heating, refrigeration and air-conditioning systems.
  • Removed and installed heating and air-conditioning systems.
  • Maintained heating and air-conditioning systems.
  • Experience with retrofitting air-conditioning systems.
  • Installed, serviced, and maintained residential and commercial heating and air-conditioning systems.
  • Assist in planning and designing of new installations of heating and air-conditioning systems.
  • Installed a variety of air-conditioning systems, heating units, and related equipment.
  • Installed and maintain diverse heating, ventilation, and air-conditioning systems.
  • Diagnose and repair heating and air-conditioning systems.
  • Design of heating and air-conditioning systems.
  • Developed hands-on electrical skills Installed and maintained home heating and air-conditioning systems
  • Maintain and repaired all heating equipment, (forced air, steam & hydronic) air handling equipment and Air-conditioning systems.
  • Perform task such as preventive maintenance, troubleshooting, and service to hvac split-system heating and air-conditioning systems.
  • Installed heating and air-conditioning systems Supervised and trained employees on proper installation of equipment Maintained and repaired heating and air-conditioning systems

Show More

44. Residential Customers

low Demand
Here's how Residential Customers is used in Hvac Technician jobs:
  • Serve as diagnostics technician/maintenance technician for air conditioning and heating equipment for residential customers.
  • Performed energy audits for residential customers to maximize cost savings and program rebates.
  • Provided technical support and consultation to commercial and residential customers.
  • Provide recommendations and perform lay outs for residential customers.
  • Provided mechanical services to commercial and residential customers.
  • Marketed annual service contracts for residential customers.
  • Installed HVAC equipment for residential customers
  • Install, maintain and repair heating, ventilation, and air conditioning (HVAC) units for residential customers.
  • Install, maintain and repair heating, ventilation, and cooling units for both commercial and residential customers.
  • Service, repair and troubleshooting of air conditioning, heating and refrigeration units for residential customers.
  • Installed, repaired and maintained heating, cooling and refrigeration systems for commercial and residential customers.
  • Performed all aspects of equipment maintenance, repairs and new installation for commercial and residential customers.
  • Performed service and repairs for commercial and residential customers as the business warranted.
  • Install and repair HVAC system automation components for commercial and residential customers.
  • Serviced heating and cooling for residential customers throughout the Kansas City metro.
  • Service and maintenance residential customers HVACR Systems.
  • Repaired and replaced defective air conditioning and heating equipment, components and wiring for commercial and residential customers.
  • Offer upgrades to residentials HVAC systems, maintenance agreements, and other services to residential customers.

Show More

45. Heat Exchangers

low Demand
Here's how Heat Exchangers is used in Hvac Technician jobs:
  • Assisted in parts installation, heat exchangers, unit heaters, blower motors and compressors as well as coil change outs.
  • Worked with furnaces, boilers, stoves, heat exchangers, burners, blowers, fans and radiant heaters.
  • Self-directed all repairs from changing belts and fixing leaks to replacing compressors, fans, blowers and heat exchangers.
  • Perform pm to ice machines, install heat exchangers, clean boilers, and perform other HVAC service calls.
  • Installed new equipment, replaced evaporator and condenser coils, changed out warranty compressors, and heat exchangers.
  • Installed, prepared and tested heat exchangers for the Presidential Dining Facility and Living quarters.
  • Performed repairs such as evap coil, compressor, reversing valves, heat exchangers and anything electrical.
  • Diagnose cracked heat exchangers Install condenser coils, evaporator coils, air handlers, and furnaces.
  • Work on commercial chillers, glycol, water; punched tubes, washed heat exchangers.
  • Assisted in parts installation, heat exchangers, unit heathers, blower and motor compressor.
  • Service provider for evaporative cooling equipment, heat exchangers, and filtration systems.

Show More

46. Water Pumps

low Demand
Here's how Water Pumps is used in Hvac Technician jobs:
  • Repair and troubleshooting to chillers, cooling tower, reheat water pumps, chilled water pumps and cooling tower water pumps.
  • Install new HVAC equipment, replace all types of compressors, water pumps, trouble shoot all types of units and repair
  • Installed and calibrated systems tested cooling and heating system and rebuilt pressure and temperature safety valves and water pumps.
  • Change Air filters, Replace Turbines, Water Pumps, Motors, Mechanical Seals and Everything related to Utilities.
  • Skilled in various types of water pumps, unit heaters, hot water, steam and electrical.
  • Serviced and repaired pneumatic controls and including chill water pumps, and cooling tower equipment.
  • Repaired water pumps for chilled water systems, as well on hot water pumps.
  • Maintain and repaired domestic, heating, and chill water pumps and controls.
  • Repair and maintain water pumps, valves, fans, and motors.
  • Remove and replace water pumps, belts, and air filters.
  • Installed and maintained chilled water pumps and heating water pumps.
  • Installed maintained and repaired hot water pumps.
  • Air handler units, changed filters as needed, Inspected Fan coil unit, Chilled water Pumps, Glycol feeder systems.
  • Serviced breaks and suspension installed factory parts; changedwater pumps.
  • Performed services calls Ordered service equipment, parts Repaired air conditioning, heating equipment, Ice Machines, Water pumps.

Show More

47. Ventilation Systems

low Demand
Here's how Ventilation Systems is used in Hvac Technician jobs:
  • Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
  • Investigated problems with and repaired mechanical and electrical equipment in heating, cooling and ventilation systems.
  • Machine experience in manipulation of sheet metal to proper shape/dimensions for ventilation systems.
  • Redesigned ventilation systems that involved make-up air units and exhaust fans.
  • Assessed the accuracy of ventilation systems by using troubleshooting procedures.
  • Monitored heating and cooling ventilation systems.
  • Modify and balance ventilation systems.
  • Install, repair, service and price quote bids for air conditioning units, heating systems, and ventilation systems.
  • Install, repair, and service air conditioning units, heating systems, and ventilation systems and upkeep of units.
  • Check the air quality of ventilation systems and make adjustments to ensure compliance with mandated safety codes.
  • Performed duties such as: crane operator, asbestos removal, forklift; cleaned ventilation systems.
  • Deliver metal sheets, install ventilation systems, duct work, and always with customer courtesy.
  • Programmed industrial air handling units for the UCLA Children s hospital s heating and ventilation systems.
  • Serviced and maintained air conditioning, heating, and ventilation systems in commercial facilities.
  • Installed duct work and ventilation systems in new and existing homes.
  • Exhaust and ventilation systems * Steam and hot water boiler systems
  • Install heating and air conditioning equipment and ventilation systems.
  • Identify obstructions within plumbing, heating and ventilation systems.
  • Serviced rooftop heating and cooling units and ventilation systems.
  • Installed ventilation systems, air ducts and line sets.

Show More

48. Residential Homes

low Demand
Here's how Residential Homes is used in Hvac Technician jobs:
  • Cleaned and removed dust particles from heating systems in residential homes/commercial property using special cleaning equipment.
  • Perform high quality installation on several residential homes earning high approval from customer.
  • Service/Installed Equipment on existing and new construction residential homes.
  • Installed heating and air-conditioning systems in residential homes.
  • Design Comfort systems for residential homes
  • Installed, replaced and repaired electrical wiring and circuits to NEC code compliance for residential homes, businesses, and pools.
  • Diagnosed, repaired and replaced HVAC systems in residential homes with an emphasis in professional and friendly communications with clientele.
  • Perform the tasks of installation and maintenance of heating, air conditioning, and ventilation equipment in residential homes.
  • Assist owner & supervisors to install and maintain home heating and cooling products in new or existing residential homes.
  • Installed, serviced, and maintained heating and cooling units in both residential homes and commercial businesses.
  • Service Technician repairing and maintaining Goodman and York furnaces and air conditioners for residential homes only.
  • Provided customer estimates, install and repair of heating and air conditioned units for residential homes
  • Provide service and preventive maintenance to residential homes and resolve any issues that occur.
  • Service and preventative maintenance on heating and cooling units at commercial and residential homes.
  • Worked on residential homes, rentals, apartment complexes, and hotels.
  • Assisted in the installation of air conditioning systems in residential homes.
  • Repair HVAC system automation components for businesses or residential homes.
  • Installed new HVAC units in residential homes and commercial business.
  • Repaired a/c units in residential homes (new construction).
  • Installed and removed heat and air systems in residential homes.

Show More

49. New Units

low Demand
Here's how New Units is used in Hvac Technician jobs:
  • Installed new units or replacement parts for existing units according to specifications and established safety guidelines.
  • Gained an understanding of the advanced systems of HVAC and installed new units in residential, as well as commercial buildings.
  • Assisted foreman with installation of new units, retrofitting, brazing, and pipe fitting.
  • Developed relationships with vendors for parts, new units, pricing, and availability.
  • Install new units, keep work vehicles stocked with necessary supplies to complete jobs.
  • Install new units and test for connection issues, leaks, and pressure levels.
  • Remove and repair broken heating and cooling units and install new units if necessary.
  • Service calls 24/7, repair, fix and install used and new units.
  • Worked on trailer/mobile home HVAC systems by troubleshooting and installing new units.
  • Installed new units, compressors, dryers, reversing valves, etc.
  • Install new units and retrofits including up to 25 ton package units.
  • Quoted customers on prices of repairs, new units and up sales.
  • Installed new units from two ton to fifteen tons.
  • Constructed duct sizing and design and installed new units.
  • Set up new units inside closets or attics.
  • Organized, scheduled, and installed new units.
  • Install new units at sites when needed.
  • Install new systems duct work leak checks changing refrigeratins buy new units Accomplishments I am universal certified in ac work
  • Diagnosed and repaired HVAC equipment Sold club memberships and set leads for new units
  • Installed new units on commercial buildings,and refrigeration units in restaurants.

Show More

20 Most Common Skill for a Hvac Technician

Package Units20%
Hvac8.2%
Boilers7.8%
Preventative Maintenance6.9%
Air Ducts5.7%
Trouble Shooting5.7%
Furnaces4.9%
Heat Pumps4.7%

Typical Skill-Sets Required For A Hvac Technician

RankSkillPercentage of ResumesPercentage
1
1
Package Units
Package Units
16.2%
16.2%
2
2
Hvac
Hvac
6.6%
6.6%
3
3
Boilers
Boilers
6.3%
6.3%
4
4
Preventative Maintenance
Preventative Maintenance
5.6%
5.6%
5
5
Air Ducts
Air Ducts
4.6%
4.6%
6
6
Trouble Shooting
Trouble Shooting
4.6%
4.6%
7
7
Furnaces
Furnaces
4%
4%
8
8
Heat Pumps
Heat Pumps
3.8%
3.8%
9
9
Customer Service
Customer Service
3.7%
3.7%
10
10
Chillers
Chillers
3.7%
3.7%
11
11
Refrigeration Equipment
Refrigeration Equipment
3.6%
3.6%
12
12
Safety Procedures
Safety Procedures
3.3%
3.3%
13
13
Service Calls
Service Calls
2.9%
2.9%
14
14
Service Tech
Service Tech
2.7%
2.7%
15
15
Air Handlers
Air Handlers
1.8%
1.8%
16
16
Necessary Repairs
Necessary Repairs
1.7%
1.7%
17
17
Exhaust Fans
Exhaust Fans
1.6%
1.6%
18
18
Electrical Systems
Electrical Systems
1.5%
1.5%
19
19
Ice Machines
Ice Machines
1.4%
1.4%
20
20
Control Systems
Control Systems
1.3%
1.3%
21
21
Hand Tools
Hand Tools
1.2%
1.2%
22
22
New Construction
New Construction
1.1%
1.1%
23
23
Trane
Trane
1%
1%
24
24
VAV
VAV
1%
1%
25
25
Job Site
Job Site
0.9%
0.9%
26
26
Roof Top Units
Roof Top Units
0.9%
0.9%
27
27
Hvac/R
Hvac/R
0.9%
0.9%
28
28
Circuit Breakers
Circuit Breakers
0.8%
0.8%
29
29
New Equipment
New Equipment
0.8%
0.8%
30
30
Water Heaters
Water Heaters
0.8%
0.8%
31
31
Mechanical Equipment
Mechanical Equipment
0.7%
0.7%
32
32
General Maintenance
General Maintenance
0.7%
0.7%
33
33
Company Vehicle
Company Vehicle
0.7%
0.7%
34
34
Evaporator Coils
Evaporator Coils
0.7%
0.7%
35
35
Defective Equipment
Defective Equipment
0.6%
0.6%
36
36
Freon
Freon
0.6%
0.6%
37
37
Water Systems
Water Systems
0.6%
0.6%
38
38
Proper Operation
Proper Operation
0.5%
0.5%
39
39
Air Compressors
Air Compressors
0.5%
0.5%
40
40
Kitchen Equipment
Kitchen Equipment
0.5%
0.5%
41
41
DDC
DDC
0.5%
0.5%
42
42
Osha
Osha
0.4%
0.4%
43
43
Air-Conditioning Systems
Air-Conditioning Systems
0.4%
0.4%
44
44
Residential Customers
Residential Customers
0.4%
0.4%
45
45
Heat Exchangers
Heat Exchangers
0.4%
0.4%
46
46
Water Pumps
Water Pumps
0.4%
0.4%
47
47
Ventilation Systems
Ventilation Systems
0.4%
0.4%
48
48
Residential Homes
Residential Homes
0.4%
0.4%
49
49
New Units
New Units
0.3%
0.3%

26,420 Hvac Technician Jobs

Where do you want to work?