Hvac technician jobs in Mansfield, TX - 1,032 jobs

Groundworks, is seeking talented Service Technician to join their team in the Dallas, TX area! The Service Technician is an integral part of the customer journey post installation. They focus on partnering with customers to inspect and service preexisting company installed foundation repair and water management solutions. The Service Technician supports our customers with additional solutions options and needs. Why you should join our Service Team Base Pay + Commission with NO CAP on earnings Average annual earnings $120,000 Company Vehicle and Gas Card provided Full-time nonseasonal work Pre-qualified, high-quality appointments, no cold-calling required! Advanced leadership training opportunities from a promote from within led culture Benefits include Medical, Dental, Vision, Long/Short Term Disability, Life insurance, 401(k) with a company match, PTO after applicable waiting periods Equity in North America's Leading Foundation Repair and Water Management Company Job Responsibilities Execute appointments scheduled with customers Travel to customers' home based on assigned appointments Build long-term relationships with customers and professionally represent the company Recommend additional products and services to enhance or improve original installation or to remedy a potential issue through established processes and procedures Perform annual customer maintenance visits, examining work previously completed Perform reactive service appointments, diagnose, and fix any issues Install additional products purchased by the customer as necessary Adhere to safety regulations and procedures when carrying out responsibilities Examine solutions installed by the company and determine potential warranty or non-warranty work Communicate the status of each job (completions and complications) and submit all necessary documentation to the Service Manager and customer as required Other duties as assigned Qualifications 1 or more years of proven sales experience preferred but not required Construction/Home Improvement experience preferred Proven customer relations experience preferred High school diploma or GED or equivalent experience A valid, non-restrictive Driver's License is required Requirements Full-time Remote & Onsite: Reporting into and working remotely of Branch location Servicing area within territory Groundworks is the leading provider of Foundation Repair, Crawl Space Encapsulation, Basement Waterproofing, and Concrete Lifting & Stabilization. With locations across the USA and Canada, Groundworks is the leading foundation solutions and water management company in North America! Recognized as a Top Workplaces USATM company and offering employee ownership for everyone, we're building something that just can't be replicated. And we're on a mission to change an industry like never before! We're unique here at Groundworks. We are all connected through the same vision, mission, and values, and we are stronger together. We're proud to be the Groundworks Tribe! Our highly trained teams have decades of experience delivering innovative solutions, unmatched quality, and industry-leading warranties, helping homeowners everywhere protect and repair their most valuable asset - their home. When customers choose a local Groundworks company, they can feel confident they're hiring the trusted local experts who will ensure the job's done right. When you choose Groundworks, you'll join thousands of Tribemates who are making history.

The Service Technician - SBE is responsible for repairing and reconditioning equipment in the profit center and/or customer locations. Responsible for installation of equipment for customer accounts and is responsible for diagnostics of mechanical, electrical, and plumbing problems and takes corrective action. Provides customer assistance in resolving customer questions, problems, or complaints regarding equipment. Job Responsibilities Calls on customers as assigned by Service Manager or General Manager to investigate operating difficulties of equipment. Diagnoses problems and figures out reasons and the nature of correction. Makes repairs or adjustments to equipment to return the equipment in working order. Cleans and maintains equipment on location including exchanging decanters and cleaning brewers. Documentation including verification of the closing calls, invoice completion, asset verification and any required customer documentation Repairs and refurbishes equipment; maintain spare parts levels. Ability to accurately collect work completed in company provided mobile device. Maintains a good working relationship and liaison with customers to maintain a positive image of the company and product. Perform scheduled and unscheduled service activities including emergency service calls, preventative maintenance, surveys, and installations. Maintains service area and vehicle in a clean and organized condition. Follows company guidelines on safety and operates vehicle in a safe manner. Completes weekly Driver Report and follows guidelines in the Fleet Manual. Follows all safety standards and policies set by manufacturers and company. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications High School Diploma or GED required Solid understanding in repairing small electrical appliances. Must be willing to learn how to connect equipment to water sources, add additional lines and drainage when vital. Must be willing to learn how to work with copper, braided and pex lines. This skill is normally developed through six months to one year of experience in the equipment service operations or through vocational training. The ability to read and write in English is required. Must also possess effective communication and customer service skills. Incumbent must have an acceptable driving record and a qualified driver's license. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking & standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ***************************** or connect with us on Facebook, Instagram and Twitter. Nearest Major Market: Dallas Nearest Secondary Market: Fort Worth

Make your mark at the world's largest HVAC company Daikin Applied is seeking a full-time Controls Technician III. In this role, you will be responsible for installation, programming, and service of commercial building digital control systems. These responsibilities will increase based on exposure to tasks, ability to develop troubleshooting skill set, and consistent and accurate completion of assignments. The Building Automation Systems (BAS) you will be installing and servicing includes but is not limited to Daikin branded controls or third-party controls system. Come be a part of an exciting journey at Daikin Applied, where innovation and excellence drive our every endeavor! Location: Dallas, TX- Onsite What you will do: Provide responsive and professional customer service with the goal of building and maintaining long-term customer relationships Identify, analyze, diagnose, and troubleshoot direct digital control systems Perform preventative maintenance, commissioning, and replacement modifications as needed or requested by customers Maintain building automation systems by inspecting trend logs, reports, schedules, applications, hardware, and programming Provide controls technical support to HVAC technicians Train and mentor less experienced technicians Create and/or implement programming and graphics for new installations and retrofit projects Commission controls installations and verify that control sequences meet scope, design, or specifications Record and report billing, inventory, timecards, technician tip reports, and other articles as required and in a timely manner Interact and train customers by offering status reports of service before, during, and after each call and explain technical information to both technical and non-technical audiences Participate in available training through regional technician trainers, off-site learning modules, and Daikin Learning. Maintain all required certifications and continue to develop new skill sets Ensure standards, policies, procedures, and maintenance of a clean work area are always upheld Follow all OSHA and Daikin Applied safety policies and procedures What's in it for you: Factory Certified Training, Online Training Courses, or other professional on the job training in the Building Automation and HVAC Industry The opportunity to work on all types of Building Automation Systems and cutting-edge technologies such as Intelligent Equipment Daikin Applied provides technicians with company vehicle, laptops, mobile devices, and other technologies The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best The opportunity to work for a leading innovator in HVAC and Building Automation where you can make a difference in environmental initiatives to create a more sustainable world for all Minimum Qualifications: High School Diploma or GED Technical training and 5+ years of equivalent combination of education and experience Valid Driver's License and acceptable driving record Rotational Emergency Call Support as required Required license(s) and/or training card as required by local law district Work visa sponsorship is not available for this position Preferred Qualifications: Experience in BAS, HVAC, or related industry Proficiency with test instruments and calibration tools Competency in operation of engineering/commissioning tools, DDC controllers and field devices, BACnet protocol fundamentals Competency in the operation of HVAC equipment and controls Ability to read low voltage wiring diagrams and controls flow diagrams Niagara AX and/or Niagara 4 certification Experience with any common integration protocols such as: BACnet MST / IP, LON, Modbus TCP / RTU, Ethernet OIP, MQTT, or SQL Strong computer skills, including computer networking fundamentals OSHA 10 within 90 days of hire (Daikin provides this training during onboarding process) Current first aid / CPR card Benefits: Daikin Applied offers the following benefits for this position, subject to applicable eligibility requirements Multiple medical insurance plan options + dental and vision insurance 401K retirement plan with employer match Paid time off and company paid holidays Paid sick time in accordance with the federal, state and local law Tuition Reimbursement after 6 months of continuous service The typical hourly pay rate for this position ranges from $35.40 - $55.30 in Texas. Individual base pay will depend on a wide range of factors including your skills, qualifications, experience, and location. If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

Job Description About H&G Systems H&G Air Conditioning & Heating was founded in 1968 and evolved into H&G Systems in 1983 to reflect a broader range of services. Our company is built on a foundation of trust, respect, and long-term relationships with clients, suppliers, and employees alike. We specialize in servicing commercial, institutional, and industrial installations of all sizes. Our experience includes data centers, hospitals, office buildings, hotels, churches, historical renovations, industrial food plants, manufacturing facilities, and laboratories. What We Offer Competitive pay: $30.00 - $45.00 an hour, based on experience and education Take-Home Vehicle: Dispatched directly from home Uniforms Provided Comprehensive Benefits Package: 401(k) with 6% company match Medical coverage: 90% of employee cost Dental and Vision insurance Paid Time Off (PTO) 8 paid holidays Professional Development: Access to the local ABC training facility / CEF Construction Education Foundation Tuition and book reimbursement for trade school programs (with successful participation) Ongoing leadership training and professional development opportunities are supported by the company. We are seeking an experienced HVAC Service Technician as we grow our business. In addition to providing startup and warranty support to our construction group, this technician will also support our end-user clients through scheduled maintenance, equipment repair, and equipment replacement projects. Work start and end time: 7:00 am - 5:30 pm Monday to Friday (weekends, overtime, and evenings on occasion) Primary Job Functions: Performs electrical and mechanical inspection and maintenance on HVAC equipment to ensure peak performance Perform specific scheduled maintenance tasks per the scope of work. Including documenting the equipment's operational data with a designed log. Uses experience and technical skills in system operations to determine service requirements Ability to interpret engineering drawings in reference to layout, location, and operation of the system(s) Represents the company in a positive manner to other trades, contractors, and owners Advise the customer of any system issues found. Communicates within our department to provide corrective actions to be taken Suggest solutions beyond repairs that are beneficial to the customer Works in a team-based environment to share information and workload while ensuring customer satisfaction Submits required paperwork in a timely manner Must work safely daily and ensure that all safety measures are taken at all times Performs other duties as assigned Willingness to assist with any additional and reasonable duties assigned by the supervisor Flexibility to work overtime/ weekends, as required Provide excellent customer service with a positive attitude Adhere to all company policies and procedures Required Qualifications: A combined five years' experience servicing commercial and residential HVAC units Must have a valid driver's license with an insurable driving record Ability to pass a drug screening and a background check Ability to work in diverse conditions, including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc. Work from a 28' extension ladder and 12', 10', 8'and 6' step ladder. Must be able to climb, crawl, stoop, kneel, and must regularly lift and/or move up to 50 pounds Ability to work independently with minimal supervision and balance the requirements of multiple and varied duties Meet all qualifications and have all the tools required. Including the ability to demonstrate working knowledge of daily, weekly, and monthly skills noted below. Understand and communicate the benefits of preventative maintenance. Demonstrate advanced customer service skills and can communicate clearly, ideas, and explanations of problems to residential and commercial customers and coworkers Demonstrate willingness to accept responsibility and leadership roles. Experience in training and mentoring service technicians. Operate scissors and genie lifts safely. Strong problem-solving and critical thinking skills Operating knowledge of Microsoft Office software and working proficiency with hand handheld computer (i.e., Smartphone, iPad) Good written and verbal communication skills Desired Qualification -- completion from HVAC Technical School

HVAC Service Sr Controls Technician II Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Install and modify software and graphics. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $30-40 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Style Crest has a 50-year tradition of growth and innovation in the building products industry. The organization has a commitment to the manufactured housing industry and the residential exterior cladding market with an extensive product offering and a dedicated service platform that customers count on to support the success of their businesses. Style Crest, Inc. is looking for an experienced heating and cooling technician to join our HVAC installation and service team in Fort Worth, Texas. As the HVAC Service Technician, you will troubleshoot, repair, service and install a variety of HVAC equipment including refrigeration, air conditioning, electric motors, heating units, heat pumps, compressors, boilers, burners, intake and exhaust fans, etc. Ensures service work and new installations are performed professionally, timely and accurately to build confidence and a positive reputation in the eyes of the customer. Manages time proactively to ensure scheduled jobs are completed each day. Trains and assists other service technicians and installers in troubleshoot or solving issues on the job. Works with scheduling to understand the priority of the jobs each day. Ensures the needed parts and tools are loaded on the truck for each day's activities. Notifies management of any issues with vehicles, equipment or tools. Keeps assigned company vehicle clean and organized. Performs all work in a professional manner and treats customers with respect at all times. Qualified candidates must possess the following knowledge, skills, experience and abilities: 1 to 2 years of HVAC experience with a thorough understanding of installation, start up, troubleshooting, repair, tools and test instruments. Must be mechanically inclined and be capable of troubleshooting and repairing equipment. Demonstrates strong organizational, customer service and time management skills. Must be a dependable person who is willing to learn new tasks and is a team player. Effective written and verbal communication skills with customers and co-workers. Must be willing to work on-call and overtime hours as needed. Must have a valid driver's license and an acceptable MVR. 💲$1,000 New Hire Bonus! We're offering a $1,000 sign-on bonus to qualified candidates who join our team-apply today and be part of a company that values your expertise and commitment. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Founded in 2019, our incredible team of engineers, programmers, and solution providers have worked tirelessly to bring Quantum Building Solutions to the forefront of the industry. At Quantum Building Solutions, we offer an array of energy-saving applications and have developed a state-of-the-art user experience that is unparalleled in the industry. QBS is focused on being the premier Integration Specialists of DFW and the surrounding areas. We will continue to work relentlessly to become the Building Automation standard, providing big-picture insights and solutions for companies of all sizes. We are looking for Experienced HVAC Controls Technicians to join our growing team. Primary Job Function: Controls technician for Building Management Systems (BMS) and Heating, Ventilation & Air Conditioning (HVAC) systems will perform service calls and work on larger projects in cooperation with a project manager. This includes working with DDC controllers, low voltage wiring, DDC graphical programming (ABB, Johnson FX, Distech, Tridium, Honeywell, AAON, and several other controls manufacturers), wiring diagrams, and mechanical plans, as well as performing other assigned tasks as required. Why Work For Us? The Building Automation industry is quickly becoming an "Integration Specialist" industry. This new direction provides unparalleled opportunities for individuals who love working with new technology coupled with a vast array of energy management solutions. QBS leads the market with our approach to this new landscape and empowers our employees to continue their professional, as well as personal, growth! Work Hours: 8:00 am to 5:00 pm Monday through Friday, with occasional overtime and weekends as required Compensation: $25 - $35 per hour, depending on experience Comprehensive Benefits Package: 100% of the medical insurance for the employee and their families (low deductible PPO) 401k program with 4% company match 7 paid holidays 2 weeks of vacation from start Company take-home vehicle Gas card Company phone and laptop Required Qualifications: Valid driver's license & insurable driving record Experience with MS Visio Experience with controls Experience with DDC, PLC, or similar Ladder-Logic programming 2+ years of experience with diagnosis, programming, and repair of building automation systems Experience with Cylon (ABB), Distech Controls, Honeywell, or JCI is a plus Experience with Tridium Niagara is a plus Tridium Niagara N4 certification is a plus

Oak View Group Oak View Group is the global leader in venue development, management, and premium hospitality services for the live event industry. Offering an unmatched, 360-degree solution set for a collection of world-class owned venues and a client roster that includes the most influential, highest attended arenas, convention centers, music festivals, performing arts centers, and cultural institutions on the planet. Position Summary Under general direction of the Operations Manager - HVAC / Plumbing, the HVAC Technician performs advanced level and lead work duties in the technical operation, maintenance and repair of various HVAC/R, electrical, plumbing and auxiliary systems. Troubleshoot and diagnose a variety of MEP systems in a widely dispersed building. This role pays an hourly rate of $31.00-$34.00. Benefits for Full-Time roles: Health, Dental and Vision Insurance, 401(k) Savings Plan, 401(k) matching, and Paid Time Off (vacation days, sick days, and 11 holidays). This position will remain open until April 10, 2026. About the Venue This position is based at our Kay Bailey Hutchison Convention Center. The Kay Bailey Hutchison Convention Center Dallas (KBHCCD) is one of the largest convention centers in the nation. Every year it welcomes over a million visitors attending major national and international conventions, meetings, concerts, athletic competitions, auto shows, and more. Located in the heart of downtown Dallas, the KBHCCD has been and continues to be a fixture in the Dallas skyline offering 1 million square feet of exhibit space, three ballrooms, 88 meeting rooms, 1,750-seat theater, and a 9,816-seat arena. The award-winning facility is connected to a 1,001-room hotel via skybridge and is adjacent to two Vertiport landing pads. Responsibilities * Diagnose and repair problems within the following HVAC/R equipment systems: Heating, ventilation, air conditioning systems and associated equipment such as VRF systems, multi-zone units, electrical controls, pneumatic controls, steam coils, chilled water systems, self-contained heating and cooling units, exhaust systems, pumps, air compressors, ductwork, cooling towers and other miscellaneous equipment. * Regularly monitor and adjust building automation controls to achieve optimum comfort and energy savings. * Schedule and monitor building automation to include HVAC and lighting systems. * Adhere to all related OSHA practices, examples include, lock-out/tag-out, MSDS, confined entry, bloodborne pathogens, etc. * Understand how to reset different pieces of equipment; this includes, chillers, VFDs, air handlers, boilers. * Demonstrate knowledge of checking cooling tower hot decks and removing dirt and debris. * Be able to clean strainers on different type of equipment, examples, condenser, hot and chill water systems. * Operates and monitors equipment, which admits steam into each building from central distribution point, pressure reducing stations. * Inspects, dismantles, repairs, and reassembles equipment as directed. * Completes tests for chemical control of boiler water, cooling water, and condensate. * Troubleshoots, repairs and replaces general and laboratory exhaust fan systems. * Repairs or adjusts valves, piping connections, fittings, and couplings. * Understand the function of VFD and how to control the hertz in terms of speeding and slowing down pumps. * Troubleshot and perform routine maintenance on heat exchangers. * Troubleshoot and perform maintenance on equipment actuators and other automatic control valves. * Know and understand low water and high-water cut-off safeties for boilers. * Demonstrate the ability to operate deaerator systems for steam applications. * Demonstrate understanding of 3-way valves, bi-pass valves, isolation valves. * Demonstrate the ability to blow down boilers and cooling towers each day. * Demonstrate the capability to setup chain fall systems to change strainers for chillers and condenser water pumps. * Be able to operate confidently aerial platforms and forklifts. * This includes hanging diapers or tracing the different type of pipes throughout the facility. * Some brazing/soldering experience for preferred applications * Knowledge of DDC and building automation systems. * Be able to replace different types of pipes, example, copper, cast iron, stainless steel. * Clean-up and organize mechanical rooms, mezzanine, physical plants, and work shops. * Provide access for contractors from time to time. * Adress roof leaks, sprinkler, water leaks. * Makes regular patrols through mechanical rooms to record condition and operation of equipment to ensure its being scheduled into preventative program before failure. * Participate in the operation, maintenance and repair of facility equipment, minor electrical, lighting, commercial kitchen and plumbing repairs to expedite the return of equipment or auxiliary systems to operational status * Complete minor plumbing task for event related activity. * Track daily productivity via timesheets, daily logs and CMMS. * Communicate arrival, location and departure with HVAC/Plumbing Manager. * Perform event related duties, set-ups and coverage as assigned. * Clearly, effectively, and timely communicate work issues with staff. * Provide excellent customer service assistance to internal and external clients. * Other duties as assigned. Qualifications * To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. * The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * High school diploma (or equivalent) required. * Minimum of 3-4 years of direct experience in HVAC/R and control programs. * Experience with computerized building automation systems. * Operating knowledge of Microsoft Office software, general computers and understanding of basic IT functions. * Ability to communicate clearly and concisely in the English language, both verbally and in writing. * Ability to work independently and as part of a team. * Must have availability to work schedule based on business and event needs, Including weekends and holidays. * Must be flexibility to adjust from time to time depending on emergencies and building needs. * Solid problem-solving skills. Strengthened by our Differences. United to Make a Difference At OVG, we understand that to continue positively disrupting the sports and live entertainment industry, we need a diverse team to help us do it. We also believe that inclusivity drives innovation, strengthens our people, improves our service, and raises our excellence. Our success is rooted in creating environments that reflect and celebrate the diverse communities in which we operate and serve, and this is the reason we are committed to amplifying voices from all different backgrounds. Equal Opportunity Employer Oak View Group is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis ("protected class") including, but not limited to veteran status, uniform service member status, race, color, religion, sex, national origin, age, physical or mental disability, genetic information or any other protected class under federal, state, or local law.

About us Airadigm Solutions is a testing company that focuses on optimizing indoor airflow by measuring and proportioning air and water flow throughout new and existing commercial buildings. Work for a team where people take care of each other, a team that respects each other and enjoys their job! Stay active and solve problems! We give you an excellent career opportunity, not just a job! Our Airadigm Solutions Training Academy is a state-of-the-art facility where we train you for a new career and you get paid to train, not pay to get trained! Our Culture Airadigm Solutions has a great culture of: Integrity Responsiveness Respect Teamwork Always Improving All In Qualifications: No experience necessary Must be 18 years or older with a high school diploma or equivalent Must have a valid driving license with a clean driving record for the past five years Must be able to climb and work off ladders Some travel may be required from time to time Benefits Company vehicle with company-provided test instruments. Company work shirts, hats, jackets, hard hats, safety glasses, and vests provided. Health, Dental & Vision insurance with eligibility on the first of the following month from date of hire and above average company contribution toward premiums. Three weeks paid Earned Time Off (vacation, sick days, personal time) with accrual eligibility on week 2 of employment. 401(k) Retirement Plan with up to 4% Company match. Eligibility after 90-Day Introductory Period. Seven paid major holidays off. A monthly $50.00 cell phone reimbursement. Traveling Cost Paid by Company: Hotels, $50 per diem, and travel time paid. AAA Plus Memberships Enrollment into Airadigm Technical Academy

Yellowstone Local is proud to represent Assured Comfort Services HVAC Services, an industry leader in commercial HVAC and plumbing. If you're a seasoned Commercial HVAC Lead Technician who knows commercial systems inside and out and wants to bring your A-game to a company that values your experience, we want to talk to you. What's in it for You? Pay Range: $35 to $40 per hour, based on experience (no commissions) Consistent Schedule: Full-time work with a steady flow of commercial projects Benefits Package: Medical, dental, vision, and 401(k) with company match Perks: Company vehicle, fuel card, uniforms, and employee discounts Career Growth: Training and advancement opportunities as the company expands Paid Time Off: PTO and paid holidays so you can recharge Why You'll Love It Here Your expertise is respected and relied on, no micromanagement Work with a close-knit, professional team that gets the job done right Tackle a mix of new construction, remodel, and service work, no two days are the same Leadership that listens, supports, and promotes from within Be part of building something bigger with a company that's growing throughout Dallas-Fort Worth Your New Role As a Commercial HVAC Lead Technician based in Dallas, TX, you'll take the lead on commercial HVAC projects across the DFW area, approximately 40% new construction, 30% remodel, and 10% service. You'll be trusted to diagnose, install, repair, and maintain systems with minimal supervision, ensuring high-quality results every time. Your day-to-day will include: Leading commercial HVAC installs, remodels, and service calls Performing diagnostics, troubleshooting, and system repairs Working hands-on with rooftop units, boilers, and other commercial HVAC systems Ensuring compliance with safety codes and regulations Coordinating with project managers and contractors on-site Communicating professionally with clients and team members Documenting work and maintaining a clean work area and vehicle Representing the company with pride and professionalism Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Must-Have Qualifications At least 5 years of commercial HVAC experience Strong hands-on skills with service, installations, renovations, and diagnostics Comfortable working with rooftop units, boilers, and full-range commercial HVAC systems Valid driver's license and a clean driving record (required for company vehicle and access to job sites like schools or hospitals) Ability to pass a background check EPA Certification preferred (Type II or Universal) Able to work independently and manage projects Good communication skills and attention to detail Preferred Qualifications Medical gas certification Previous experience working in schools, hospitals, or similar commercial environments Willingness to relocate to Dallas, TX (relocation assistance is not provided) Assured Comfort Services HVAC Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

Looking for a rewarding career opportunity with great benefits? Look no further! Join our team! Performs preventative maintenance on HVAC equipment, this includes changing air filters, greasing, replacement of belts, etc. Installs motors, electronics, thermostats, humidistats, fans, and other HVAC components. Assists with troubleshooting and resolving issues with HVAC equipment. Maintain a flexible work schedule including being on-call. Other duties as assigned. Must be willing to work weekends. Essential Duties And Responsibilities To maintain and service all aspects of the heating, ventilation, and air conditioning systems in two, large, state-of-the-art research facilities. Maintain VAV boxes, heating water hydronics, chilled water controls, and automated control systems. Troubleshoot problems working on commercial HVAC systems, and assisting in maintaining systems. Support and assist other trades. Responds to after-hours call-out and other duties as assigned.

Job Description (MUST HAVE RESIDENTIAL HVAC EXPERIENCE) Operate, maintain, and repair all equipment used for heating, ventilation, and air conditioning for residence equipment. This individual supports the business by traveling to customers and helping create solutions for their homes. You will partner with the business to diagnose issues and repairs. In addition to supporting Milestone efforts to ensure we are effectively communicating with our customers. Duties and Responsibilities: Diagnose and repair of electronic, mechanical, and electrical components of these systems. Travel to job sites in the service area and work with dispatch to ensure the schedule is maintained and delays are properly communicated to the customer. Be available to work nights and weekends on a rotating basis to service emergency needs of our customers. Maintain good working order of company vehicle including refueling as necessary, reporting any mechanical issues, and filling out and submitting vehicle inspection form. EXTREME customer service skills, Ability to interact with homeowners, collect money and relay information clearly. Maintain proper stock, parts, tools, and safety equipment on the vehicle. Educate homeowner on potential opportunities for additional business (newer system, service contracts, and additional services) Maintain and repair heating, ventilation, and cooling units for residential customers. Diagnose and repair electronic, mechanical, and electrical components of these systems. Must be able to meet any physical ability requirements listed in this description. May perform other job duties as directed by team member's leaders. Participate in company provided training opportunities on latest industry technologies. Active (Valid) Driver's License. (3 yrs of clean driving history) required. Candidates must pass background check and pre-employment drug screen. Requires the ability to communicate effectively using speech, vision and hearing. Skills: Positive-forward thinking and excellent in conflict resolution. Must have a minimum of 3 years of HVAC residential service experience (required). A current EPA certification and State Registered TDLR (required). Excellent organization, communication, and prioritization skills Strong multi-tasking skills, including the ability to flex on demand across multiple support channels. Good analytical skills and attention to detail with ability to read and interpret plans and manuals. Computer skills: Microsoft Office, and IOS devices, Demonstrate our Milestone and Leader Core Values Physical and Mental Requirements Must be able to lift and move items of 75 pounds and/or more on regular basis and repetitively lift weights of 40 to 50 pounds on raised surfaces Must be able to climb, bend, kneel, crawl and stoop on a frequent basis for extended periods Must be able to work in cramped or high places such as attics, ladders and tunnels Must be able to carry heavy items up and down stairs Must be able to work in extreme weather conditions including but not limited to extreme heat, rain, snow or sleet Must have mental skills such as critical thinking , problem solving, and a technical vocabulary to understand direction and adhere to established procedures. Must be willing to adapt well in the face of workplace stressors such as customer service complaints. Compensation and Benefits: Medical, Vision, & Dental insurance / 401 (k) savings plan Average Expected Earnings of $95,000- $180,000+ with Milestone as a Service Technician Advancement training opportunity. Paid Holidays & Personal Time Off (PTO) Monthly company family meetings & many other fun activities.

Reports To Lead HVAC Technician Work Year Days 250 Salary Actual salary will be calculated based on experience Primary Purpose To provide support to the Maintenance Department by tracking and processing the maintenance requests and completing preventative maintenance of departmental equipment and facilities related to HVAC and refrigeration equipment. Qualifications Education/Certification:High School Diploma or GEDEPA CertificationValid Texas Driver License and driving record that is insurable with FISD insurance carrier Special Knowledge/Skills: Ability to repair and perform preventative maintenance on all HVAC equipment Ability to lift 75 pounds Ability to prioritize emergency service needs within the department Ability to handle multiple tasks and work effectively with frequent interruptions Ability to work well with others Experience: Minimum of 1 year of experience in HVAC maintenance Major Responsibilities and Duties Complete routine conditioning and servicing of installed air refrigeration systems and components including: compressors, condensers, valves, coils, cooling towers, heat pumps, motors, belts, bearings, fans, filters, piping, wiring, control systems thermostats, ducting, heat exchangers, pumps, water source heat pumps, actuators and other appurtenances.Flexible to work on-call to address emergencies that occur during non-business hours as needed.Troubleshoot and diagnose malfunctioning systems and components.Perform replacement of major and minor parts, components or entire systems.Maintain a professional appearance, attitude and demeanor when interacting with school personnel and the public.Perform other duties as assigned by the Lead HVAC Technician. Other Duties as Assigned Frisco ISD retains the right to adjust the responsibilities and assignments of all positions as needed to meet the needs of the District. Work Relationships Frisco ISD is committed to fostering a collaborative work environment that honors and supports the social and emotional well-being of all. Employees are expected to interact in a manner that is becoming of educators and promotes high levels of productivity for the benefit of the students we serve. Working Conditions Ability to work in stressful environment. Work with frequent interruptions. Prolonged use of the computer and other office equipment. Continuous driving from location to location. Work outside and inside. Exposure to hot and cold temperatures. Additional Considerations The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required. Disclosure Statements The Frisco Independent School District is an equal opportunity employer and does not discriminate against applicants or employees because of race, national origin, gender, age, religion, or disability status of otherwise qualified individuals. FISD does not discriminate on the basis of membership or application for membership in the uniformed services.

Calls on customers as assigned by Service Manager or General Manager to investigate operating difficulties of equipment. Diagnoses problems and figures out reasons and the nature of correction. - Makes repairs or adjustments to equipment to return th Service Technician, Service Tech, Technician, Service Manager, Equipment, Social Services

Style Crest has a 50-year tradition of growth and innovation in the building products industry. The organization has a commitment to the manufactured housing industry and the residential exterior cladding market with an extensive product offering and a dedicated service platform that customers count on to support the success of their businesses. Style Crest, Inc. is looking for an experienced heating and cooling technician to join our HVAC installation and service team in Fort Worth, Texas. As the HVAC Service Technician, you will troubleshoot, repair, service and install a variety of HVAC equipment including refrigeration, air conditioning, electric motors, heating units, heat pumps, compressors, boilers, burners, intake and exhaust fans, etc. Ensures service work and new installations are performed professionally, timely and accurately to build confidence and a positive reputation in the eyes of the customer. Manages time proactively to ensure scheduled jobs are completed each day. Trains and assists other service technicians and installers in troubleshoot or solving issues on the job. Works with scheduling to understand the priority of the jobs each day. Ensures the needed parts and tools are loaded on the truck for each day's activities. Notifies management of any issues with vehicles, equipment or tools. Keeps assigned company vehicle clean and organized. Performs all work in a professional manner and treats customers with respect at all times. Qualified candidates must possess the following knowledge, skills, experience and abilities: * 1 to 2 years of HVAC experience with a thorough understanding of installation, start up, troubleshooting, repair, tools and test instruments. * Must be mechanically inclined and be capable of troubleshooting and repairing equipment. * Demonstrates strong organizational, customer service and time management skills. * Must be a dependable person who is willing to learn new tasks and is a team player. * Effective written and verbal communication skills with customers and co-workers. * Must be willing to work on-call and overtime hours as needed. * Must have a valid driver's license and an acceptable MVR. $1,000 New Hire Bonus! We're offering a $1,000 sign-on bonus to qualified candidates who join our team-apply today and be part of a company that values your expertise and commitment. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Oak View Group Oak View Group is the global leader in venue development, management, and premium hospitality services for the live event industry. Offering an unmatched, 360-degree solution set for a collection of world-class owned venues and a client roster that includes the most influential, highest attended arenas, convention centers, music festivals, performing arts centers, and cultural institutions on the planet. Overview Under general direction of the Operations Manager - HVAC / Plumbing, the HVAC Technician performs advanced level and lead work duties in the technical operation, maintenance and repair of various HVAC/R, electrical, plumbing and auxiliary systems. Troubleshoot and diagnose a variety of MEP systems in a widely dispersed building. This role pays an hourly rate of $31.00-$34.00. Benefits for Full-Time roles: Health, Dental and Vision Insurance, 401(k) Savings Plan, 401(k) matching, and Paid Time Off (vacation days, sick days, and 11 holidays). This position will remain open until April 10, 2026. Responsibilities Diagnose and repair problems within the following HVAC/R equipment systems: Heating, ventilation, air conditioning systems and associated equipment such as VRF systems, multi-zone units, electrical controls, pneumatic controls, steam coils, chilled water systems, self-contained heating and cooling units, exhaust systems, pumps, air compressors, ductwork, cooling towers and other miscellaneous equipment. Regularly monitor and adjust building automation controls to achieve optimum comfort and energy savings. Schedule and monitor building automation to include HVAC and lighting systems. Adhere to all related OSHA practices, examples include, lock-out/tag-out, MSDS, confined entry, bloodborne pathogens, etc. Understand how to reset different pieces of equipment; this includes, chillers, VFDs, air handlers, boilers. Demonstrate knowledge of checking cooling tower hot decks and removing dirt and debris. Be able to clean strainers on different type of equipment, examples, condenser, hot and chill water systems. Operates and monitors equipment, which admits steam into each building from central distribution point, pressure reducing stations. Inspects, dismantles, repairs, and reassembles equipment as directed. Completes tests for chemical control of boiler water, cooling water, and condensate. Troubleshoots, repairs and replaces general and laboratory exhaust fan systems. Repairs or adjusts valves, piping connections, fittings, and couplings. Understand the function of VFD and how to control the hertz in terms of speeding and slowing down pumps. Troubleshot and perform routine maintenance on heat exchangers. Troubleshoot and perform maintenance on equipment actuators and other automatic control valves. Know and understand low water and high-water cut-off safeties for boilers. Demonstrate the ability to operate deaerator systems for steam applications. Demonstrate understanding of 3-way valves, bi-pass valves, isolation valves. Demonstrate the ability to blow down boilers and cooling towers each day. Demonstrate the capability to setup chain fall systems to change strainers for chillers and condenser water pumps. Be able to operate confidently aerial platforms and forklifts. This includes hanging diapers or tracing the different type of pipes throughout the facility. Some brazing/soldering experience for preferred applications Knowledge of DDC and building automation systems. Be able to replace different types of pipes, example, copper, cast iron, stainless steel. Clean-up and organize mechanical rooms, mezzanine, physical plants, and work shops. Provide access for contractors from time to time. Adress roof leaks, sprinkler, water leaks. Makes regular patrols through mechanical rooms to record condition and operation of equipment to ensure its being scheduled into preventative program before failure. Participate in the operation, maintenance and repair of facility equipment, minor electrical, lighting, commercial kitchen and plumbing repairs to expedite the return of equipment or auxiliary systems to operational status Complete minor plumbing task for event related activity. Track daily productivity via timesheets, daily logs and CMMS. Communicate arrival, location and departure with HVAC/Plumbing Manager. Perform event related duties, set-ups and coverage as assigned. Clearly, effectively, and timely communicate work issues with staff. Provide excellent customer service assistance to internal and external clients. Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma (or equivalent) required. Minimum of 3-4 years of direct experience in HVAC/R and control programs. Experience with computerized building automation systems. Operating knowledge of Microsoft Office software, general computers and understanding of basic IT functions. Ability to communicate clearly and concisely in the English language, both verbally and in writing. Ability to work independently and as part of a team. Must have availability to work schedule based on business and event needs, Including weekends and holidays. Must be flexibility to adjust from time to time depending on emergencies and building needs. Solid problem-solving skills. Strengthened by our Differences. United to Make a Difference At OVG, we understand that to continue positively disrupting the sports and live entertainment industry, we need a diverse team to help us do it. We also believe that inclusivity drives innovation, strengthens our people, improves our service, and raises our excellence. Our success is rooted in creating environments that reflect and celebrate the diverse communities in which we operate and serve, and this is the reason we are committed to amplifying voices from all different backgrounds. Equal Opportunity Employer Oak View Group is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to veteran status, uniform service member status, race, color, religion, sex, national origin, age, physical or mental disability, genetic information or any other protected class under federal, state, or local law.

Job Description About H&G Systems H&G Air Conditioning & Heating was founded in 1968 and evolved into H&G Systems in 1983 to reflect a broader range of services. Our company is built on a foundation of trust, respect, and long-term relationships with clients, suppliers, and employees alike. We specialize in servicing commercial, institutional, and industrial installations of all sizes. Our experience includes data centers, hospitals, office buildings, hotels, churches, historical renovations, industrial food plants, manufacturing facilities, and laboratories. What We Offer Competitive pay: $30.00 - $45.00 an hour, based on experience and education Take-Home Vehicle: Dispatched directly from home Uniforms Provided Comprehensive Benefits Package: 401(k) with 6% company match Medical coverage: 90% of employee cost Dental and Vision insurance Paid Time Off (PTO) 8 paid holidays Professional Development: Access to the local ABC training facility / CEF Construction Education Foundation Tuition and book reimbursement for trade school programs (with successful participation) Ongoing leadership training and professional development opportunities are supported by the company. We are seeking an experienced HVAC Service Technician as we grow our business. In addition to providing startup and warranty support to our construction group, this technician will also support our end-user clients through scheduled maintenance, equipment repair, and equipment replacement projects. Work start and end time: 7:00 am - 5:30 pm Monday to Friday (weekends, overtime, and evenings on occasion) Primary Job Functions: Performs electrical and mechanical inspection and maintenance on HVAC equipment to ensure peak performance Perform specific scheduled maintenance tasks per the scope of work. Including documenting the equipment's operational data with a designed log. Uses experience and technical skills in system operations to determine service requirements Ability to interpret engineering drawings in reference to layout, location, and operation of the system(s) Represents the company in a positive manner to other trades, contractors, and owners Advise the customer of any system issues found. Communicates within our department to provide corrective actions to be taken Suggest solutions beyond repairs that are beneficial to the customer Works in a team-based environment to share information and workload while ensuring customer satisfaction Submits required paperwork in a timely manner Must work safely daily and ensure that all safety measures are taken at all times Performs other duties as assigned Willingness to assist with any additional and reasonable duties assigned by the supervisor Flexibility to work overtime/ weekends, as required Provide excellent customer service with a positive attitude Adhere to all company policies and procedures Required Qualifications: A combined five years' experience servicing commercial and residential HVAC units Must have a valid driver's license with an insurable driving record Ability to pass a drug screening and a background check Ability to work in diverse conditions, including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc. Work from a 28' extension ladder and 12', 10', 8'and 6' step ladder. Must be able to climb, crawl, stoop, kneel, and must regularly lift and/or move up to 50 pounds Ability to work independently with minimal supervision and balance the requirements of multiple and varied duties Meet all qualifications and have all the tools required. Including the ability to demonstrate working knowledge of daily, weekly, and monthly skills noted below. Understand and communicate the benefits of preventative maintenance. Demonstrate advanced customer service skills and can communicate clearly, ideas, and explanations of problems to residential and commercial customers and coworkers Demonstrate willingness to accept responsibility and leadership roles. Experience in training and mentoring service technicians. Operate scissors and genie lifts safely. Strong problem-solving and critical thinking skills Operating knowledge of Microsoft Office software and working proficiency with hand handheld computer (i.e., Smartphone, iPad) Good written and verbal communication skills Desired Qualification -- completion from HVAC Technical School

Make Lives Better Yellowstone Local is proud to represent Sirius Plumbing & Air Conditioning, an industry leader in quality plumbing and HVAC services. If you're not just looking for another HVAC job and want to be part of a team that actually values your time, respects your skill, and rewards your hustle, this opportunity as an HVAC Service Technician is for you. What's in it for You? Competitive Pay: $70,000 - $100,000 annual salary range, plus commissions and performance-based bonuses. Comprehensive Benefits: Full medical, dental, and vision coverage. Work-Life Balance: No after-hours calls; enjoy your evenings and weekends! Perks & Equipment: Uniforms and laundry service, take-home truck, gas card, and toll tag. Why You'll Love It Here A Culture of Growth: We don't just fix HVAC systems; we build futures. At Sirius, you'll have access to continuous training and development. Respect for Your Time: Closed on Sundays and no duty schedules; we value work-life balance as much as you do. Career Advancement: Be part of a company that's expanding quickly, with plenty of opportunities for advancement as you progress. Your New Role Daily Calls: Efficiently manage 4-5 residential HVAC service calls per day, providing top-notch service with every interaction. Utilize Your Skills: Use your HVAC expertise to solve issues and keep customers comfortable. Team Contribution: Be the dependable, knowledgeable team member that our customers and team rely on. Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. EPA Refrigerant Certification (minimum) Must live within 5-10 miles of the office in Carrollton, TX 75007 2-4+ years of Residential Service HVAC Experience Active Driver's License and Clean Driving Record Must be willing to submit to a background check and drug testing Must be able to consistently lift and carry 25-50lbs Must be authorized to work in the U.S. Sirius Plumbing & Air Conditioning is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #orange

Reports To Lead HVAC Filters Technician Work Year Days 250 Salary Actual salary will be calculated based on experience. Primary Purpose Under general supervision, perform general maintenance and replace filters throughout the district. Assist with the maintenance of HVAC equipment. Qualifications Education/Certification: High School Diploma/GED Valid Texas Driver License and driving record that is insurable with FISD insurance carrier Special Knowledge/Skills: Ability to follow written and verbal instructions Knowledge of basic construction and routine maintenance and repair procedures Ability to communicate effectively (verbally) Ability to use hand and power tools Ability to work independently Experience: Minimum of 1 year of experience in general building maintenance Major Responsibilities and Duties Assist skilled workers with repair and maintenance of district facilities, including repairing HVAC and motors; repairing, and replacing filter grills and condensate leaks and replacing ceiling tiles. Perform maintenance on HVAC equipment. Operate light truck to transport filters and HVAC equipment throughout district. Operate equipment and use tools following established safety procedures. Follow established safety procedures and techniques to perform job duties, including lifting, climbing, etc. Correct unsafe conditions in the area and report any conditions that are not correctable to the supervisor immediately. Maintain tools and equipment and perform preventive maintenance as required. Other Duties as Assigned Frisco ISD retains the right to adjust the responsibilities and assignments of all positions as needed to meet the needs of the District. Work Relationships Frisco ISD is committed to fostering a collaborative work environment that honors and supports the social and emotional well-being of all. Employees are expected to interact in a manner that is becoming of educators and promotes high levels of productivity for the benefit of the students we serve. Working Conditions Mental Demands/Physical Demands/Environmental Factors: Continual walking and standing; frequent heavy lifting and carrying; climbing, stooping, bending, kneeling, and reaching. Work outside and inside. Exposure to extreme temperatures, dust, fumes, and odors. Exposure to mechanical, electrical, and chemical hazards. Work around moving objects or vehicles. Equipment Used: Power tools (drill, saw, etc), hand tools Additional Considerations The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required. Disclosure Statements The Frisco Independent School District is an equal opportunity employer and does not discriminate against applicants or employees because of race, national origin, gender, age, religion, or disability status of otherwise qualified individuals. FISD does not discriminate on the basis of membership or application for membership in the uniformed services.