Hvac technician jobs in Sulphur Springs, TX - 6,495 jobs

Supervisory Responsibilities: No supervisory responsibilities. Travel: No travel required. Duties & Responsibilities: Paid Johnson Controls Metasys training and certification provided. Operations and Maintenance support to the Energy Control staff by responding to calls of a controls related nature and performing PM, testing, calibration and other work associated with operation of MEDVAMC BSM controls and related BSE controlled by these systems. Any required preventive maintenance to the energy management systems and components and related BSE controlled by BMS systems to include testing of control and controlled components, replacement of bad components, including valves, dampers, and their respective controllers for both electric and pneumatic systems. Repairs to HVAC energy management systems and components and related BSE utilizing HVAC energy management DDC systems to evaluate equipment performance for operational issues. Reporting for each work order request and corrective action. Investigate Metasys systems and the applicability of each of these programs on a system-by-system basis. Complete training in automation controls and HVAC. Complete HVAC Preventative Maintenance and repairs in various parts of the country as needed. Minimal Assistance With: Tune-up, calibration, and maintenance to include an analysis of the Chiller plant control system, HVAC Control system, as well as applicable building control technologies related to MEDVAMC BSE. Update and correct deficiencies within the existing BMS system and BSE, increase the energy efficiency of the facility through maintenance of the BMS and BMS to provide options and alternatives that may improve the overall BMS (equipment calibration, system modifications, etc.) during the process. Recommendations to MEDVAMC on energy savings opportunities. Development and programming of HVAC and energy optimization strategies. Technical review sessions to MEDVAMC operational and engineering personnel and contract personnel on HVAC system programming as it pertains to MEDVAMC's equipment. HVAC energy management reports that are available within the Metasys systems to the customer monthly. Required Skills/Abilities: Excellent verbal and written communication skills. Excellent interpersonal and customer service skills. Proficient in Microsoft Office Suite. Excellent organizational skills and attention to detail. Ability to proficiently read Mechanical and Electrical blueprints. Physical ability to perform all necessary job responsibilities. Ability to work independently. Education and Experience: High school diploma or GED. 8+ years of experience in Mechanical, Electrical, Plumbing or Controls Field.. 30-Hour OSHA Certification. Valid driver's license. Metasys factory training preferred. Physical Requirements: May have to spend prolonged outside exposed to inclement weather and/or temperatures. Must have the ability to use hand tools, lift/carry 50 lbs., and to work on ladders/step stools.

Heat Treatment Technicians are responsible for conducting a process where metal and alloy materials are treated using heat to alter their physical, and sometimes chemical, properties. This process makes the material more desirable or useful for specific applications. Their duties and responsibilities include: Setting up and operating heat treatment equipment based on job specifications Monitoring machines to ensure they maintain the correct conditions during the heat treatment process Performing inspections to evaluate the physical properties of materials after heat treatment Conducting routine maintenance and troubleshooting on heat treatment machinery and equipment Working with engineers and other technicians to develop and implement heat treatment plans Ensuring compliance with safety procedures and regulations during all heat treatment operations Interpreting and adhering to blueprints, technical drawings, and plans Documenting and reporting on the process and results of heat treatment procedures Inspecting finished products to ensure they meet quality standards and specifications Calibrating and maintaining heat treatment equipment to ensure it operates at optimal levels Job Type: Contract Work Location: On the road BE SURE TO APPLY ON OUR WEBSITE: ****************

This position is open to all of Texas, but please note that you will be servicing College Station and surrounding areas. Residing within that radius would be necessary. Join Our HVAC Team Today: If you're ready to heat up your career and cool down customer concerns, apply now! Sign-On Bonus: Up to $5,000, based on qualified repair technician experience ( not available for rehires or maintenance tech ). First year potential $70k - $125k, based on performance Training Pay: $24 - $27 an hour, based on experience Schedule: Monday - Friday Hours: Start to Finish (8:00 AM or 8:30 AM start - generally done approx. by 6:00 PM) Weekend & After Hours* After hours rates apply On-call services are also available* To apply for this position: Please note this is a hybrid position. You'll need at least 3 years of hands-on experience in residential HVAC maintenance and service to qualify. At least 1 year as a Sales/Home Comfort Advisor experience. Just a heads-up: if you've recently finished HVAC school but haven't gotten hands-on experience yet, this role is not the right fit just yet - we're looking for someone with real-world, on-the-job experience. That said, please be on the lookout for any future Apprenticeship/Installer opportunities - we'd love to help you grow your career when the time is right! At ABC Home & Commercial Services, we're more than just a company; we're a family committed to excellence. With 75 years of history and a team of over 1,000+ employees serving a growing network of cities in Central and South Texas, we take pride in being a family-owned business dedicated to fulfilling commitments, serving others, and supporting families. How You'll Make an Impact: We're seeking a well-rounded HVAC professional with both residential service experience and some sales expertise. This position will be approximately 75% residential service, maintenance, and repair and 25% sales, providing an exciting opportunity to leverage your technical skills while assisting customers with HVAC solutions. The ideal candidate will have: At least 3 years of hands-on residential HVAC service/maintenance experience At least 1 year of AC sales experience, ideally in a role like Sales Home Comfort Advisor A strong balance of technical expertise and customer-facing sales skills The ABC Difference: What sets us apart from the competition? At ABC Home & Commercial Services, we don't have a slow period. You'll never experience a loss of hours - we guarantee always 40 or more hours every week. Our continuous growth means we need more skilled HVAC Techs like you. Join us and discover how we can keep you working and earning throughout the entire year and beyond! Requirements What You'll Bring: Must hold a valid driver's license with an issue date of at least five years prior to the date of this application A minimum of 3 years of hands-on residential HVAC maintenance and service experience is required 1 year of AC sales experience required Current TDLR registration and EPA universal certification required. Must know and understand all applicable federal, state, and local codes and safety measures and be able to apply them in a practical manner on each job. Excellent communication & customer service skills. High proficiency with emailing, instant messaging and use of various electronic devices and applications for effective communication/information sharing. Ability to prioritize workload, work under pressure and handle irate customers and still maintain good composure. Dependable and self-motivated with desire to work year-round. Ability to work inside and/or outside for long periods of time, sometimes in extreme temperatures. What We Offer: Comprehensive benefits package including health, dental, vision, and life insurance. 401(k) with company matching. Paid vacation, sick leave, and participation in our Profit-Sharing Plan. Additional compensation opportunities through our Lead Now Program. Company clubs, outings, and paid training and development opportunities. Tuition reimbursement and educational scholarships for employees and family members. Volunteer Engagement Program with approved Volunteer Time Off (VTO). Wellness program including a gym membership and a company vehicle with gas card. What You'll Do: As ABC's HVAC Service Technician / Sales Home Comfort Advisor, you will: Carry out full AC & Heating installation skills such as: equipment removal and installation of new, duct repair and/or replacement (fiberglass, flex, and metal), soldering, venting flues, refrigerant leak detection, and charging, recovering and reclaiming refrigerant, measuring refrigeration system parameters (gas pressures and temperatures, etc.), calculating static and CFM delivery, carrying out basic framing, roofing, plumbing and electrical skills. Provide expert recommendations and solutions for customers' HVAC needs (sales ~25% of role) Work with inspectors, suppliers, and co-workers to ensure correct project work, while abiding by all codes. Communicate effectively with supervisors, dispatchers, CSRs, and customers to ensure complete alignment at all times during the service repair or replacement process. Work with and train any helpers which may be assigned to work with you. Maintain a professional attitude at all times with customers, fellow employees, and supervisors. Join Our Team Today: At ABC Home & Commercial Services, we're excited to welcome you to our Team and support your growth as we work together to keep our community comfortable and thriving. What are you waiting for - in 2 weeks you could be behind the wheel of our very spiffy white vans - you know the one with the Anteater on it. ABC is an Equal Opportunity Employer. Please note that if an offer is extended that we do conduct the following pre-employment screenings: Drug Screen, Physical & Physical Performance Evaluation (PPE). ABC participates in the E-Verify (I-9) program and conducts comprehensive criminal background checks, along with a 7-year Motor Vehicle Report (MVR) review. Must hold a valid driver's license with an issue date of at least five years prior to the date of this application. *As an equal opportunity employer, we are committed to respecting the religious beliefs and practices of all individuals. We will consider reasonable accommodation requests from applicants and employees who require adjustments to their work schedules or practices due to sincerely held religious beliefs, provided such accommodations do not create an undue hardship on the company's operations. PM21 #INDP1

Full Job Description: We're seeking skilled Carpenters (journeyman+) for exciting projects in select U.S cities. This includes journeymen, masters, foremen and superintendents. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Markets Hiring: San Antonio, TX | El Paso, TX | Columbia, SC | Houston, TX | Austin, TX | Savannah, GA | Atlanta, GA | Morrilton, AR | Miami, FL | Orlando, FL | Tampa, FL | Indianapolis, IN | Salt Lake City, UT Salary Range: $22 - $28 per hour Benefits: Paid Time Off Medical Retirement Here's what Skillit needs from you: Have journeyman+ carpentry skills Ability to read and interpret documents such as safety regulations, operation and maintenance instructions, and procedure manuals Ability to work with tools, such as, power and non-powered hand tools Willing and able to follow instructions and ask clarifying questions Ability to handle materials that can weigh up to 200Ibs Strong attention to detail Here's what you'll be doing: Interpret and follow blueprints and project specifications for carpentry tasks Perform various carpentry tasks such as framing, installing structures, and finishing work Adhere to safety regulations and guidelines at all times Use a variety of tools, both powered and non-powered, effectively and safely Seek clarification and ask questions as needed to ensure accurate work Lift and handle materials with care and safety Pay close attention to detail in all carpentry tasks to ensure quality workmanship

We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: * Pull and terminate low voltage cable. * Installing network equipment within commercial settings. * Follow instructions and code when pulling cable. * Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. * Ensuring all cables are neatly tied and bundled according to safety regulations. * Installing of cable support structures such as j-hooks, cable racks, and inner duct. * Conduct tests to ensure all newly installed cable systems and component devices are operational. * Troubleshoot issues with the cable network. * Perform any other duties not specifically stated herein, but which your supervisor may assign. * Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. * Perform any other duties not specifically stated herein, but which your supervisor may assign. *Skills* low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting *Top Skills Details* low voltage,installation,wap,install,cctv,cable,cat5,cat6 *Additional Skills & Qualifications* Requirements: * Experience as a Data Cable Technician. * Available for extensive travel nationwide. * Ability to prioritize tasks. * Able to lift and carry 50 pounds or more multiple times per shift. * Ability to work in cramped spaces. * Hours of project 7 pm - 7 am 5 days a week. * Ability and willingness to travel to Lowell, AR for new hire orientation. * 100% travel of the USA * Ability to operate a scissor lift; and ability to work at heights. * Able to fill out the work order and take care of the tools provided by the office to do the job. * Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. * Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. * Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Benefits: * Per-Diem paid $125 a day for food and lodging. * Company vehicle provided (traveling with a partner) *Experience Level* Intermediate Level *Job Type & Location*This is a Contract position based out of Oklahoma City, OK. *Pay and Benefits*The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Oklahoma City,OK. *Application Deadline*This position is anticipated to close on Jan 21, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

This role is primarily responsible for performing HMC Change Over level maintenance for production/operations. Perform regular operations preventive maintenance and replace parts that need to be replaced during the changeover process. Contributes to ensuring safe working practices are followed and contributes ideas to simplify and standardize the workplace. Support to troubleshoot malfunction of the HCM equipment to operators as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: Core duties and responsibilities include the following and other duties may be assigned ty the director of production and cooperation with the gels filling production supervisor. Responsible for HMC setup between the time frame established to ensure the equipment is properly set up for the production schedule. Train HMC machine operators on how to be troubleshooting the line when malfunctions occur. Troubleshoots, maintains, supports and assists with repairs to HMC production equipment. Assist with all process improvements projects and production/quality standards, Company KPIs (Key Performance Indicators) to include, but are not limited to safety, quality, cost and housekeeping. Performs preventive maintenance on all minor and major pieces of equipment related to HMC production equipment. Complies with all equipment, safety and OSHA rules and regulations. Maintain inventory of spare parts and consumable parts for equipment. Monitor facilities and manufacturing operating equipment on a daily basis, notify maintenance leadership and direct supervisor the level of spare parts, equipment problems and inefficiencies and recommend possible solutions. Identify existing and potential operational problems and efficiencies. Maintain and organize the documents and procedures related to calibration, preventative maintenance and usage of logbook. Performs related duties as assigned. Follow the Company documents (BOM) when the setup is performed and during the shift, best GMP practices and safety regulations. Perform quality checks to ensure HMC product meet company and customer quality standards e.g. (weights, Seals, code, etc.) Always maintain a safe and clean production area. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must have technical knowledge and mechanical aptitude to perform complex start up, debugging and repairs of packaging machinery. Ability to read and understand technical instructions and reference materials in order to interpret and apply Standard Operating Procedures and Work Instructions; perform practical application of mathematical calculations to solve specific mechanical problems and use many types of equipment. Must communicate effectively in order to interface with multiple internal customers and equipment vendors, contractors and others to meet project requirements. Reading, writing and speaking English clearly and concisely. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. EDUCATION AND/OR EXPERIENCE: 2-3 years as a maintenance mechanic in a manufacturing environment or 2-5 Machine operator in a manufacturing environment. Experience working in a pharmaceutical manufacturing environment preferred. Digital Logic Systems Reading Schematics and Symbols COMPETENCIES: To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops solutions. Quantity - Meets productivity standards; works in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures. Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical and environmental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and /or move anywhere from 10 - 50 pounds; and occasionally more than 100 pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Pinnacle Live is a premium, in-house AV partner. We elevate live event expectations for people and venues who demand better. With an expert balance of big-picture problem-solving and boots-on-the-ground execution, we deliver bespoke AV solutions for in-person, virtual, and hybrid meetings and live events. The most impressive, impactful meeting and events all have the same common denominator: dedicated, determined people working behind-the-scenes to make it happen. We're looking for those people. Pinnacle Live is a Collaborative Crusader. We empower you to tackle tough challengestodeliver unforgettable hospitality and live event experiences. Job Summary TheOnCall Event Services Technician is responsible for assisting with the flooroperations, including setup,strikeand operation of technology solutions in a hotel or hospitalityenvironment with a focus on delivering unmatched customer service to our guests and clients. Essential Functions Ensure all event sets and strikes are completed according to Company SOPs. Greet guests/clients before event and provide clear instructions on how to operate equipment. Provide continued communication with client to ensure success of all events Follows through on all client requests Look for opportunities to enhance client's event Maintain accurate client event information within the Company's business systems Review daily invoices with client and obtain client's signature on invoice(s) Comply with all Company security and safety measures and is constantly aware of the property inventory and location of equipment and ensures inventory is secure from theft and /or damage Ensure all inventory is in good working order and rental condition Ensure any lost stolen or damaged equipment is immediately reported to management. Ensure inventory is secure from theft and/or damage. Make sure all Company occupied areas are clean, organized, and up to Company standards Continually work toward enhancing and improving technical skills to include audio, video/data, staging and computer operation and networking. Comply with all Company policies and procedures Other duties as assigned. Education & Experience High School Graduate or equivalent Prior exposure to audio-visual and/or hospitality industry Computer proficiency (hardware,software,and networking) Required Skills & Knowledge To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Strong technical aptitude Good working knowledge of computer hardware and software Planning ability; able to plan, prioritize Strong interpersonal skills Excellent verbal and written communication skills Excellent organizational skills and attention to detail Strong team player orientation Commitment to best-in-class customer service for internal and external stakeholders Professional appearance Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sit at a desk Stand or walk for long periods, including up and down stairs Consistently bend and stoop Use hands to hold, handle, or feel Reach with hands and arms Talk, hear and communicate. Lift up to 50 pounds occasionally Pinnacle Live is an E-verify and Equal Employment Opportunity Employer Pinnacle Live is committed to welcoming, valuing, and supporting every person and their unique contributions. We are actively working to foster an environment where diversity, equity, inclusion, belonging, and mutual respect thrive. We recognize that diversity is intersectional, and that actively valuing diversity demands that we continually strive to establish a welcoming atmosphere for all. Pinnacle Live welcomes, openly acknowledges, empowers, and celebrates the diversity of all our team members, clients, and partners, and affirms the identities and experiences of all our members. We strive to create an environment where we actively embrace all forms of diversity. #LI-DNI

Do you want to learn a skilled trade in the oil and gas industry? Would you love a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a recession-proof industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.05 with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to pass a comprehensive background check and drug screening Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

EchoStar is reimagining the future of connectivity. Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products. Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV. Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world-class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience has paid off, as DISH is a six-time J.D. Power award winner for being #1 in Customer Satisfaction. Job Duties and Responsibilities What You'll Do: You'll visit customers' homes, solve problems, and introduce them to smart home tech. Install and service DISH equipment and smart home products in customers' homes Teach customers how to use their tech and offer additional services when helpful Keep a clean work area and maintain a professional attitude while working independently but staying connected with the team What's in it for You: Career Growth: Start here and grow fast! Many of our leaders began in this role, with opportunities to move into different departments for new challenges Pay Increases: Automatic promotion after 6 months with a $1/hour raise. Additional promotions with 5-10% pay increases based on performance Bonus Potential: Earn up to $6,400 your first year, and up to $9,100 annually after. High performers also receive AwardPerqs-redeemable for travel, electronics, and more Comprehensive Benefits: Paid training, time off, Medical, Dental, Vision, Life Insurance packages, HSA, 401(K) with company match, Employee Stock Purchasing Program and Tuition Reimbursement Exclusive Perks: Complimentary DISH TV ($114.99/month), discounts on Sling TV ($5/month), and Boost Mobile plans (starting at $15/month), company-provided van, tools, and uniforms Paid Training You'll Get: Clear, step-by-step guidance for installations and service Smart home tech knowledge to support and educate customers Best practices created by our most experienced techs Skills, Experience and Requirements What You'll Need: Valid Driver's License: Clean record required Schedule Flexibility: Willingness to travel as needed; flexible to work shifts that might include evenings, weekends, or holidays Physical Ability: Climb ladders (up to 40 ft) Lift up to 70 lbs Must meet and maintain 335 lb weight limit Customer Focus: Build trust and create a great experience Problem-Solving: Tackle a variety of challenges on the spot Determination: Work in tight spaces and all kinds of weather Adaptability: Handle changes and unexpected tasks with ease Benefits: From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential. The posting will be active for a minimum of 3 days. The active posting will continue to extend by 3 days until the position is filled. We pride ourselves on developing and promoting talent as an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EchoStar will accommodate the sincerely held religious beliefs of employees if such accommodations are not undue hardships and are otherwise within the bounds of applicable law. All qualified applicants with arrest or conviction records will be considered for employment in accordance with local, state, and federal law. You may redact any information that identifies age, date of birth, or dates of school/graduation from your application documents before submission and throughout our application process. EchoStar will provide reasonable accommodation to otherwise qualified job applicants and employees with known physical or mental disabilities, unless doing so poses an undue hardship on the Company, poses a direct threat of substantial harm to others, or is otherwise not required by law. EchoStar has a more detailed Accommodation Policy that applies to employees. EchoStar endeavors to make echostar.com and jobs.echostar.com accessible to users. Please contact *************** if you would like to discuss the accessibility of our website or need assistance completing the application process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications. Click the links to access the following statements: EEO Policy Statement, Pay Transparency, EEOC Know Your Rights (English/Spanish) Salary Ranges Compensation: $21.00/Hour

At Walmart, we help people save money so they can live better. This mission serves as the foundation for every decision we make, from responsible sourcing to sustainability-and everything in between. As a Walmart associate, you will play an integral role in shaping the future of retail, tech, merchandising, finance and hundreds of other industries-all while affecting the lives of millions of customers all over the world. Here, your work makes an impact every day. What are you waiting for? Walmart, Inc. is an Equal Opportunity Employer- By Choice. We believe we are best equipped to help our associates, customers, and the communities we serve live better when we really know them. That means understanding, respecting, and valuing diversity- unique styles, experiences, identities, abilities, ideas and opinions- while being inclusive of all people. Job Description Walmart is hiring HVAC/Refrigeration Technicians! You will make an impact as a HVAC/Refrigeration Technician by completing priorities in heating, ventilation, air conditioning, and refrigeration. You will maintain quality standards by inspecting installations and modifications of HVAC/R and more! What You'll Do: Troubleshoot, diagnose, maintain, and repair HVAC/R equipment Perform major and minor preventive maintenance Ensure available resources for HVAC/R maintenance and repair by managing refrigerant levels and parts inventory; tracking and ordering HVACV/R parts; and developing relationships with suppliers and contractors. You'll sweep us off our feet if you have… Previous rack refrigeration experience Understand the importance of Customer Service and have clear, transparent, and respectful communication Drive personal accountability and use effective time management to achieve commitments Qualifications Minimum Qualifications: 2 years' experience in commercial HVAC/Refrigeration maintenance Universal Environmental Protection Agency Certification Hold a valid state-issued driver's license with a clean driving record and ability to pass a Motor Vehicle Record (MVR) report Additional Information Benefits At Walmart, we offer competitive pay as well as performance-based incentive awards and other great benefits for a happier mind, body, and wallet. Health benefits include medical, vision and dental coverage. Financial benefits include 401(k), stock purchase and company paid life insurance. Paid time off benefits include PTO (including sick leave), parental leave, family care leave, bereavement, jury duty and voting. Other benefits include short-term and long-term disability, education assistance with 100% company paid college degrees, company discounts, military service pay, adoption expense reimbursement, and more. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to a specific plan or program terms. For information about benefits and eligibility, see One.Walmart.com.

of PositionThe Traveling Lead Refrigeration Installer is responsible for leading on site crews and performing specialized commercial HVAC R installations for restaurants and retail includes replacing and installing roof top package units condensers evaporators exhaust systems and refrigeration equipment such as ice machines walk in coolers and freezers A strong understanding of restaurant airflow make up air balance and refrigeration performance in high demand commercial environments is essential for this role Key ResponsibilitiesProject & Installation LeadershipLead a crew of technicians while performing hands on HVAC R installation and repair work Install replace or service HVAC units refrigeration systems ice machines walk ins and exhaustairflow equipment in restaurant and retail settings Conduct jobsite surveys to support estimating and project scope creation Coordinate manage and oversee subcontractors and vendors as needed Meet with customers store management and site personnel to review project requirements Recognize issues outside scope and escalate appropriately Communication & Coordination Communicate consistently with the General Manager Project Managers and Superintendents to ensure clarity on scope timelines and project needs Provide accurate daily reporting including recaps photos paperwork itineraries and time sheets Report crew performance concerns and ensure adherence to company standards Effectively field questions and proactively create plans of action for issue resolution Operational Execution Follow jobsite protocols and safety procedures with full awareness of surroundings Source purchase and deliver materials in a timely manner Maintain a clean safe and organized workspace for both self and crew Follow installation instructions manufacturer guidelines and project specifications Work flexible hours including days nights weekends and extended travel assignments 75100 travel Performance Expectations Complete projects on time and within budget Uphold high quality workmanship standards Maintain professionalism and composure in rapidly changing environments Ensure all crew members receive appropriate breaks and rest to work safely and effectively Required Knowledge Skills & Abilities Strong commercial HVAC R background specifically involving restaurants retail environments walk ins and ice machine repairinstallation Understanding of restaurant airflow hood systems exhaust and make up air relationships EPA Certification required Minimum 5 years of commercial mechanical or refrigeration installation experience Proficiency with hand tools and mechanicalelectrical troubleshooting General knowledge of construction trades and jobsite sequencing Ability to use mobile apps tablets and basic computer programs for reporting Demonstrated ability to manage time lead crews and follow a scope independently Must have reliable transportation and a valid drivers license Ability to lift up to 50 lbs and climb ladders Must maintain a clean professional appearance Must have a valid email address Minimum Qualifications18 years of age or older Able to pass a background check Access to reliable transportation for local travel and jobsite attendance Dependable organized and able to work flexible hours daysnightsweekends Willing to travel 75100 for out of state national projects Physical RequirementsMove about job sites around equipment materials and personnel Climb ladders or stairs as needed Operate power tools and installation equipment Installremove equipment in tight and small spaces Communicate frequently with team members and customers Lift and maneuver equipment weighing over 50 lbs Additional Information This job description outlines major responsibilities and requirements but is not all inclusive Duties may be reassigned at any time Interstate travel is routinely required and distributed among team members based on business needs Job Type Full Time For Subcontractor opportunities please apply and inquire

The Service Technician reports to the Service Manager, and is responsible for performing a range of HVACR jobs for residential customers only. Benefits Paid Training Careers Advancement Opportunities Flexible Scheduling Competitive Compensation Year-Round Work Spiffs, Rewards, & Employee Contests Customer-based activities involved in this position require an individual who is decisive, tactful, dependable, and who possesses initiative and the ability to communicate well with all customer groups. A Service Technician must be able to accurately diagnose and efficiently accomplish a job to the mutual benefit of the customer and Tiger Services. Job-related contact can occur with virtually all demographic groups, with the majority of the contacts being service customers, other Tiger Services technicians, the Service Manager, Dispatcher and the Parts Runners. Representative duties include: Serving as a member of ad hoc Service Department teams which are organized to conduct HVACR servicing jobs promptly and efficiently. Performing routine HVACR service activities without direct oversight or on-site assistance. Assisting the Senior Service Technician(s) in the training of other Tiger Services employees on service-related subjects, including call-back prevention and equipment protocols. Conducting point-of-work sales of IAQ services, unit components, unit replacements, add-on units, and residential service contracts. Developing lead referrals for the sales staff. Conducting non-service work in support of the IAQ and Installation Departments, as assigned. Performing related duties as directed by the Service Manager. Job Qualifications: High school graduate and graduate of a post-secondary HVACR program of instruction of three or more years in duration. Three or more years of successful experience, either as a commercial service or installation technician. Good verbal and reading skills, including the ability to read and apply manufacturers' instructions and to clearly communicate with residential and commercial customers, suppliers, and other Tiger Services employees. Physical ability to perform all duties noted above under the conditions, circumstances, and extreme weather conditions found in San Antonio, Texas. Interest and initiative in maintaining and advancing his or her HVACR skills through a combination of self-study, company training, manufacturers' workshops, and other professional development activities. Current Texas operator's license and the ability to operate all vehicles in the corporate fleet within 30 days of initial employment. Incumbent must be insurable by current Tiger Services insurance carrier Ability to work under pressures of time, a non-standard schedule, weather, customer needs, and backlog constraints. Compensation: $19.00 - $35.00 per hour There are many exciting options for a career in HVACR waiting to be explored. If you're looking for a career that offers flexibility, job stability, strong pay, benefits and more, then you've come to the right place!

Elevate Your Career as a Service Technician in Paris, TX! Are you ready to turn your technical skills into a career that's as exciting as it is rewarding? Do you have a passion for problem-solving and a knack for hands-on work? If so, we've got an opportunity you won't want to miss! Position: Service Technician Location: Paris, TX Company: Lonestar Truck Group Why Join Us? At Lonestar Truck Group, we're not just looking for a Service Technician-we're searching for a tech-savvy trailblazer ready to tackle challenges and make a real impact. We believe in the power of innovation, teamwork, and having a little fun along the way. If you're eager to grow your career while making a difference, you'll fit right in. What You'll Do: Diagnose and repair a wide range of equipment and machinery, from standard service calls to complex technical challenges. Provide top-notch customer service with a smile, ensuring every customer leaves satisfied and confident in our work. Maintain and troubleshoot systems with precision, utilizing cutting-edge technology. Collaborate with a dynamic team to achieve common goals and share knowledge. What We're Looking For: Proven experience as a Service Technician or similar role (technical certifications are a plus!). Strong mechanical and electrical troubleshooting skills. Excellent communication abilities and a customer-first mindset. Ability to work independently and as part of a team, managing your time effectively. A passion for learning and staying updated with the latest industry innovations. Why You'll Love Working Here: Competitive salary and performance-based incentives. Comprehensive benefits package, including health, dental, and vision insurance. Opportunities for professional development and career growth. A friendly, supportive work environment where your skills and contributions are recognized. Join us at Lonestar Truck Group and be a part of a team that's driving success and innovation every day. We can't wait to meet you!

**JOB TITLE:** Breeder Service Tech **Will be responsible for:** 1. Helping coordinate functions and working with other techs in the Breeder Hen Department 2. Supervising and working with Contract and Company Owned breeder farms producers on a daily basis. 3. Weighing birds on a weekly basis and adjusting feed amounts to meet weight goals and production goals. 4. Keeping accurate records containing bird weight, feed amounts, production and hatch records. 5. Checking feed tank inventories weekly and ordering feed for each hen farm. 6. Maintaining proper Bio-Security measures on each farm and company vehicle. 7. Perform related tasks as required **SKILLS REQUIRED:** + Must have verifiable experience in the poultry industry preferably in Breeders and Pullets + Must be self motivated and able to work independently + Must have strong time management skills + Must have good communication skills in both verbal and written form + Must be a team player, committed to Continuous Improvement + Some computer skills required + Must be able to work in hot / cold dusty conditions + Confidentiality is a must **EDUCTIONAL REQUIREMENTS:** Bachelor's Degree in Poultry Science or related field desired or minimum of five years experience in Breeder / Pullet field EOE, including disability/Vets

Our Electrical Service Technicians operate related tasks include: installing and repairing electrical systems and equipment in commercial and residential areas, perform installations, troubleshoot customer electrical problems, etc.. This position will act as a mentor to apprentices. Faithco is growing and this is a great opportunity to join a team of great people. Our goal is to find a professional and customer focused individual to help shape the future of Faithco. What's in it for me? Market Value Compensation $60,000 to $100,000 and UP depending on you! Commission Based Pay Weekly Spiffs Medical plans for you and your family to choose from. Life Insurance, Short-Term and Long-Term Disability Professional Development Training Coached and supported career growth Weekly bonuses, spiffs, and incentives based on performance and efficiency Dynamic, collaborative, and fun workplace environment Company vehicle and gas card Company uniforms Employee Recognition Program What will my day look like? Diagnose common and diverse electrical tasks efficiently and accurately and perform electrical services Strong residential service experience and strong troubleshooting skills Explaining the value to customers Installation of electrical components Do I have what it takes? Current Texas Licensing Valid Texas Drivers License (3 years driving experience with clean driving record) Must pass background check and drug screen Service Titan experience a plus Good analytical skills and attention to detail Provide exceptional customer service while on the jobsite Results driven in a high-energy environment Must be able to follow directions and work independently Ability work in hot, cold, wet climates depending on the weather Maintain well-groomed appearance and keep a clean uniform and work shoes Faithco Enterprise Inc, and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Faithco Enterprise Inc, and its affiliates comply with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, please contact the company Human Resources office

Experienced Service Technicians Become a key part of our dynamic and supportive team at Hyundai of Terrell. We are searching for experienced and skilled Service Technicians to provide exceptional experience for our customers. Your reliability and attention to detail will be essential to our success. The Service Technician should be proficient in diagnosing and maintenance in all areas of repair, including specialized areas of repair for Hyundai vehicles. If you can compete in a fast-paced environment and the ability to achieve high standards, then apply today! Employee Benefits & Compensation Package: Paid time off (PTO) and Holiday pay Company paid life insurance Health and wellness plans Medical, dental, vision, and supplemental insurance Flexible Spending accounts Financial retirement plans WITH COMPANY MATCHING 401K and ROTH Employee Discounts and Incentive Program WITH COMPANY MATCHING Role Responsibilities: Inspect malfunctioning equipment and accurately diagnose mechanical issues. The Service Technician will devise a repair plan, secure the necessary components with the Parts Department, and team up with management and other technicians to confirm efficient and effective service. Install new equipment or systems and perform routine maintenance to guarantee optimal performance of the customer's vehicles. Assist customers to understand their needs, explain diagnoses, and provide solutions to ensure service satisfaction. The Service Technician will trouble shoot and resolve issues effectively. Document the repair and maintenance work performed. The Service Technician will note concerns encountered and create a detailed service report. Employee Prerequisites: Streamlined onboarding process Ability to comprehend and interpret documentation; communicate effectively. Strong understanding and knowledge of vehicle mechanics, equipment and systems, and technology operations. Certifications, Licenses, and local registrations are essential! Pay based on experience! Flexible schedule Job Type: Full-time We are an Equal Opportunity Employer. Applicants must be 18 years or older and be authorized to work in the United States. Applicants must have a valid driver's license and must complete the pre-employment screening. #75224 #75231 #75147 #75114 #75143 #75159 #75160 #75032 #75126 #75114 #75142 #75161 #Terrell #Rockwall #Forney #Crandall #Kaufman

We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: * Pull and terminate low voltage cable. * Installing network equipment within commercial settings. * Follow instructions and code when pulling cable. * Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. * Ensuring all cables are neatly tied and bundled according to safety regulations. * Installing of cable support structures such as j-hooks, cable racks, and inner duct. * Conduct tests to ensure all newly installed cable systems and component devices are operational. * Troubleshoot issues with the cable network. * Perform any other duties not specifically stated herein, but which your supervisor may assign. * Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. * Perform any other duties not specifically stated herein, but which your supervisor may assign. *Skills* low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting *Top Skills Details* low voltage,installation,wap,install,cctv,cable,cat5,cat6 *Additional Skills & Qualifications* Requirements: * Experience as a Data Cable Technician. * Available for extensive travel nationwide. * Ability to prioritize tasks. * Able to lift and carry 50 pounds or more multiple times per shift. * Ability to work in cramped spaces. * Hours of project 7 pm - 7 am 5 days a week. * Ability and willingness to travel to Lowell, AR for new hire orientation. * 100% travel of the USA * Ability to operate a scissor lift; and ability to work at heights. * Able to fill out the work order and take care of the tools provided by the office to do the job. * Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. * Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. * Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Benefits: * Per-Diem paid $125 a day for food and lodging. * Company vehicle provided (traveling with a partner) *Experience Level* Intermediate Level *Job Type & Location*This is a Contract position based out of Tulsa, OK. *Pay and Benefits*The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Tulsa,OK. *Application Deadline*This position is anticipated to close on Jan 22, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

Do you want to learn a skilled trade in the oil and gas industry? Would you love a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a recession-proof industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.05 with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to pass a comprehensive background check and drug screening Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.