IDEX Internships - 5,884 jobs

Exponential Power is a leader in the DC sales and service industry. We are currently looking for industrial installation apprentices to cover installation projects in the Gulf south region. Industrial Apprentices are responsible for the installation of equipment such as batteries, rectifiers and associated equipment used in the Utility and Telecommunications networks. The work will involve the installation of batteries, rectifiers, BDFBs, alarms and cabling, equipment in cell sites and utility facilities. AREAS OF RESPONSIBILITY Technician will be responsible for assisting a Lead Installation Technician to ensure that an installation project is completed Safely, on-time and within QA expectations. An apprentice is a required as a second man in the majority of our installations for safety reasons. A successful candidate will be one that takes his personal and the safety of others very seriously. Technician will assist a Lead (making a team) that installs large Commercial and Industrial Batteries. This is done by removing the old rack and battery, properly packaging and transporting from the site, and then installing the new rack and battery system in the customer's site. ATTENDANCE, RELIABILITY AND PROFESSIONAL ETHICS Safety is #1 Punctuality and attendance that is reliable is mandatory. Detail oriented Ensures proper attendance, follow-up and ensures that work projects are not left undone when absent. Abides by all Exponential Power policies and procedures. MINIMUM REQUIREMENT EDUCATION High school diploma or GED, technical degree preferred. EXPERIENCE Past work experience in DC power for the cellular or utility industry a plus. Mechanical ability based on past work history. SPECIFIC KNOWLEDGE Computer Skills: Microsoft Office, Excel, ServiceMax Ability to work on ladders up to 15ft., demonstrated manual dexterity, and lift and carry loads up to 60 lbs.

Intern - Marketing Job ID: 554167497 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. We're looking for interns who are eager to learn, contribute, and grow in a collaborative environment. As an intern, you'll have the opportunity to: Work closely with team members on meaningful projects that drive results. Collaborate across departments, gaining exposure to different areas of the business. Explore and apply AI tools and technologiesas part of project work and problem-solving. Be an active part of a supportive, team-oriented culture. Contribute fresh ideas and take ownership of tasks that make an impact. Summary Lightpath is currently seeking a Marketing Intern for the summer of 2026 to support the functions of the Marketing Team. The ideal candidate has a strong passion for all facets of marketing with keen attention to detail and is an outgoing and hardworking individual. This internship will provide significant hands-on insight into a fast-paced role, as well as invaluable learning about the marketing role in a fast-growing company. Responsibilities Developing tools and methods for collecting data such as marketing campaigns, website statistics, surveys, and more. Collecting and analyzing data to identify trends and key points. Provide support for all marketing activities. Creating graphic representations of data and translating research into easily readable content for stakeholders and other departments. Assist with managing on-site production and execution of marketing activities. Participate in team and department brainstorms. Preparing marketing proposals and presentations based on company needs. Qualifications Eligible candidates should be entering their senior year of an undergraduate program or be recent graduates of an undergraduate or master's program. Must be local to one of our office locations. Bethpage NY, NYC, Golden CO, Wakefield MA, White Plains NY. Extremely detail oriented with strong organizational skills. Outstanding written and verbal communication skills. Strong ability to multi-task and "roll with the punches". Exudes a positive, personable attitude coupled with an outgoing personality. Strong proficiency in Microsoft office (specifically Word, Excel, PowerPoint, Outlook). Ability to take direction but can confidently work autonomously. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in Massachusetts. The pay range at the time of posting in the specified locations is $18.00- $20.00/hour. Pay ranges are supplied in compliance with Massachusetts law. Pay is competitive and based on a number of job-related factors, including skills and experience.

Ritchie Bros. is transforming the global used equipment market-and we want you to be part of it. As a premier global asset management and disposition company, we help thousands of customers around the world buy and sell heavy equipment, trucks, and other assets every month through our onsite and online platforms. Our team is known for innovation, customer focus, and a work culture like no other. If you thrive in a fast-paced, entrepreneurial environment, this is the place to move, build, and grow your career. The Opportunity We're looking for a Trainee Territory Manager to join our growing sales organization in the North East, MD region. This opportunity is ideal for someone who loves learning, is energized by building relationships, and is excited about a long-term sales career managing a multi-million-dollar territory. You'll enter an intensive 6-month hands-on training program, working closely with experienced Territory Managers and sales leaders. You'll learn our business, our customers, and the selling skills that make our team successful. Upon successful completion of the program, you'll be positioned for a Territory Manager role, responsible for driving growth, building customer partnerships, and serving as a trusted advisor across a diverse customer base. What You'll Learn & Do Comprehensive training across the full sales cycle, including territory management, prospecting, and pipeline planning Understanding of competitive landscapes and core selling skills Conducting high-quality customer calls and building long-term client relationships Identifying customer needs and delivering value-based solutions Gaining commitment and closing deals with integrity Exposure to operational processes such as deal management, auction operations, and customer support excellence Development of strong equipment and market knowledge, including heavy equipment fundamentals, valuation, and industry trends Hands-on experience with a wide range of machinery, including working outdoors in various weather conditions What You Bring 0-2 years of experience in a structured sales role with a strong record of meeting or exceeding targets High learning agility and genuine curiosity Strong work ethic paired with a positive, fun attitude Excellent communication and listening skills Ability to make sound decisions quickly in a fast-paced environment Natural relationship-building ability and authentic customer focus Willingness to travel 3-5 days per week within the territory Proximity to the assigned territory Ability to attend auctions and training several times per year A valid, clean driver's license Experience around heavy equipment is an asset Competitive spirit-always with integrity What We Offer Our success is built on the dedication of our people. We're committed to helping you build a rewarding long-term career with continuous learning and advancement opportunities. We offer: Comprehensive medical and dental benefits RRSP for Canada or 401(k) for US with company match Employee Stock Purchase Program Join a global team that's reshaping the used equipment industry. Apply today and start your journey toward becoming a trusted advisor and Territory Manager in North East, MD.

Here at Entegris, we use advanced science to enable technologies that transform the world, and we are seeking employees who have the drive to continue the mission. The Role: Our site in Colorado Springs, CO - Rockrimmon is seeking a Continuous Improvement Intern to join our team for the Summer 2026 season. This assignment is intended to be 12-14 weeks in duration, beginning in May 2026. The Continuous Improvement (CI) Intern supports operational excellence initiatives throughout the Colorado Springs, CO - Rockrimmon site. This role will assist in analyzing processes, identifying improvement opportunities and helping implement CI methodologies to enhance quality, efficiency and productivity. What You'll Do: * Contribute to CI and Lean projects under the guidance of CI leaders or other plant staff * Help develop project documentation, timelines, and standard operating procedures * Collect and analyze operational data to identify performance gaps or inefficiencies * Track key performance indicators and prepare reports or dashboards to monitor process performance * Support the creation or training materials and communication content for CI initiatives Assist engineering team in designing aids for manufacturing process i improvements What We Seek: * Basic knowledge of Lean, Six Sigma or continuous improvement methodologies (coursework or certifications are a plus) * Strong problem-solving skills * Excellent communication and teamwork abilities * Proficiency in Microsoft Suite products * Detail-orientated, pro-active and eager to learn *SolidWorks or AutoCAD Desired Major(s) & Graduation Year: * Pursuing a degree in Industrial or Mechanical Engineering, Business, Operations Management, Supply Chain or a related field * Graduation date of spring 2026 or later Eligibility * Must be a currently enrolled student * Available to work 40 hours a week, M-F (8a-5p) beginning in mid-May/June through August/September. * Must be familiar with the universities requirements to participate in an internship program PHYSICAL REQUIREMENTS: Basic physical requirements of operations, ability to lift 20lbs Why Work at Entegris Lead. Inspire. Innovate. Define Your Future. Not everyone who works for a global company shares the same background, experiences and perspectives. We leverage the differences of our employees to bring new ideas to the table. Every employee throughout the company is encouraged to share input on projects and initiatives. Our decision-making process is truly a collaborative effort as we realize there are leaders at every level of the organization. We put our values at the core of how we operate as an organization - not just when it's convenient, but in a lasting and meaningful way. We want the time and energy you spend here to have a positive impact on your life inside and outside of the office. What We Offer Our total rewards package goes above and beyond just a paycheck. Whether you're looking to build your career, improve your health, or protect your wealth, we offer generous benefits to help you achieve your goals. * Generous 401(K) plan with an impressive employer match * Excellent health packages to fit your needs * Flexible work schedule with paid holidays and sick time * Values-driven culture with colleagues that rally around People, Accountability, Creativity and Excellence Compensation: $20-$32 hourly range with actual pay dependent on graduation year and candidate skillset. Entegris does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need Entegris immigration sponsorship (e.g., H1B, TN, STEM OPT, etc.) now or in the future. At Entegris we are committed to providing equal opportunity to all employees and applicants. Our policy is to recruit, hire, train, and reward employees for their individual abilities, achievements, and experience without regard to race, color, religion, sexual orientation, age, national origin, disability, marital or military status.

Intern - Product Manager Job ID: 554167488 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. We're looking for interns who are eager to learn, contribute, and grow in a collaborative environment. As an intern, you'll have the opportunity to: Work closely with team members on meaningful projects that drive results. Collaborate across departments, gaining exposure to different areas of the business. Explore and apply AI tools and technologiesas part of project work and problem-solving. Be an active part of a supportive, team-oriented culture. Contribute fresh ideas and take ownership of tasks that make an impact. Job Summary The Product Manager Intern position shall assist Lightpath's Product Organization in the creation of reporting, Product Management workflow tasking and financial analysis. The candidate will work alongside other Product Managers and will learn the telecom business. The position will also assist with system integration efforts and help with data supporting the various stages of product development and workflow. The ideal candidate should have a general curiosity about the telecom sector and want to know more about Product Organizations and how they contribute to the overall success of the business. The Product Manager intern will work with account management teams, billing teams, marketing group, engineering, as well as other Product Managers to document user responses to a product, develop templates and strategies to increase productivity and improve the products. The Product Manager Intern may learn new things such as software development, agile methodologies, and product lifecycle management. A successful internship candidate will learn the following by the end of the summer. The overall product lifecycle from concept to launch, support and end of life Financial analysis of product cost structure including Gross margin, Net Present Value, Internal rate of Return and various other financials related to products Workflow processing/documentation including but not limited to Sales Order processing, Order entry, Circuit Design, Service Delivery, Billing and Support Ongoing migration activities, product reporting, and have input into the direction of approach for future products/roadmap Qualifications Eligible candidates should be entering their senior year of an undergraduate program or be recent graduates of an undergraduate or master's program. Candidate must be local to one of our office locations. (Bethpage NY, NYC, Golden CO, Wakefield MA, White Plains NY). Bachelor's degree in computer science, engineering, business, or related field of study required. Strong understanding of business fundamentals of a product and market (like share gains, profitability, addressable market). Clear understanding of cost structures and accounting principles. Prior internship experience a plus. Proficient in advanced Excel, Word, PowerPoint & MS Project. SFDC experience is a plus. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in New York State. The pay range at the time of posting in the specified locations is $18.00- $20.00/hour. Pay ranges are supplied in compliance with New York State law. Pay is competitive and based on a number of job-related factors, including skills and experience.

Stevens Industries is looking for a CAD (Computer Aided Design) Drafter Intern to work with our team of CAD Drafters, Engineers and Project Managers to convert designs into technical plans. Drafter responsibilities include gathering drawings and specifications, calculating material and equipment requirements and setting up production methods. If you have hands-on experience with computer-aided design (CAD) software and are familiar with building processes, we'd like to meet you. Ultimately, you'll help us build functional, secure and well-designed products and structures that meet our needs. ESSENTIAL FUNCTIONS: Assist CAD Drafters with projects to gather product and structural requirements and designs Calculate dimensions, weight limitations and requirements in materials Describe production methods step-by-step (including equipment and software types to be used) Create detailed designs with computer-aided design (CAD) software Design diagrams, maps and layouts to illustrate workflow Prepare and review rough sketches and review them along with the engineering team Identify potential operational issues and redesign products to improve functionality Ensure final designs comply with regulations and quality standards Create manuals that describe existing products' operation, features and maintenance Requirements Familiarity with 2D and 3D modeling tools Good math skills Communicate with Project Managers all aspects of the job that change the cost Check with Estimators to ensure buyout items are correct and priced when required Ability to meet deadlines Being able to work on several jobs at once while waiting on answers or having other problems Complete an average of 12 cabinets per hour or 2 elevations per hour while drawing Submittals Complete an average of 24 cabinets per hour or 4 elevations per hour while finishing Production Drawings BENEFITS: Highly competitive salary and bonus structure On-Demand Pay - Access your earned pay prior to payday 200% Company 401(K) Match Annual Profit-Sharing Bonuses Company Stock Options On-site Childcare for Employees' Children and Grandchildren Educational Assistance Plan Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

Job ID 2026-13505 # of Openings 2 Category Internships Benefit Type Hourly Low Fringe/Intern LMI is seeking a 2026 Intern Applicants to our Summer 2026 Cohort for Space Systems Engineering opportunities. will be an on-site role in Colorado Springs, CO* LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors-helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value. As a Space Systems Engineering Intern, you will interact daily with professional Space Systems Engineers, Aerospace Engineers, Software Engineers, UI/UX engineers, Space Systems Engineers, and Operations Analysts that support our customers. You will have the opportunity to directly support software implementation and refine your skills as you progress through the internship. Responsibilities Work as part of an agile analytical team to create novel solutions to our customers' needs. Participate in peer reviews of development work to evaluate coding techniques and implementation. Work with team members of all levels to complete daily tasks, share development knowledge, follow-up and escalate issues appropriately, and recommend design and process improvement. Evaluate, modify, and implement simulation and analysis tools. Translate user stories and business requirements into effective designs. Qualifications Current enrollment in an undergraduate or graduate program in a Computer Science related discipline. Availability to work full-time for at least 10-12 weeks for summer 2026. Ability to work on-site in the office full-time Strong understanding of software development principles and how to apply them. Prior experience as a software developer. Strong interpersonal and listening skills, with ability to develop and maintain professional relationships within LMI and with its clients. Team-oriented attitude with a growth mindset and willingness to continually learn and apply new technologies. Previous experience with or a desire to work in the space domain. All internship positions at LMI are paid positions. The pay range for this position is 20-27/hr. Disclaimer: The salary range displayed represents the typical salary range for this position and is not a guarantee of compensation. Individual salaries are determined by various factors including, but not limited to location, internal equity, business considerations, client contract requirements, and candidate qualifications, such as education, experience, skills, and security clearances. LMI is an Equal Opportunity Employer. LMI is committed to the fair treatment of all and to our policy of providing applicants and employees with equal employment opportunities. LMI recruits, hires, trains, and promotes people without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, disability, age, protected veteran status, citizenship status, genetic information, or any other characteristic protected by applicable federal, state, or local law. If you are a person with a disability needing assistance with the application process, please contact Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

We're looking for a hands-on, curious, and driven Manufacturing Engineer Intern to join our team! This internship offers a unique opportunity to gain real-world experience by working both in an office setting and directly on the production floor. You'll play a key role in identifying inefficiencies, improving processes, and supporting continuous improvement initiatives that drive productivity and quality. What You'll Do: Collaborate with engineers and production staff to analyze current manufacturing processes Identify opportunities for process improvements and assist in implementing solutions Collect and analyze data to support efficiency and workflow enhancements Assist in the design and layout of workstations, tools, and equipment Document standard operating procedures and best practices Support ongoing lean manufacturing and continuous improvement projects Participate in cross-functional team meetings and contribute ideas Requirements Currently pursuing a degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field Strong analytical and problem-solving skills Comfortable working in both office and production environments Excellent communication and teamwork abilities Proficiency in Microsoft Office; experience with CAD or data analysis tools is a plus Eagerness to learn and contribute in a fast-paced, hands-on environment Why Join Us? Gain valuable, real-world engineering experience Work on meaningful projects that make a tangible impact Learn from experienced professionals in both engineering and manufacturing Be part of a supportive and innovative team BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

Intern - Credit & Collections Job ID: 554165593 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. We're looking for interns who are eager to learn, contribute, and grow in a collaborative environment. As an intern, you'll have the opportunity to: Work closely with team members on meaningful projects that drive results. Collaborate across departments, gaining exposure to different areas of the business. Explore and apply AI tools and technologiesas part of project work and problem-solving. Be an active part of a supportive, team-oriented culture. Contribute fresh ideas and take ownership of tasks that make an impact. Job Summary The Credit & Collections intern will be reporting to the Director of Credit & Collections and will be responsible for daily portfolio management of the customer base in a positive manner and will help the department reach its cash collection and DSO goals and support overall Finance function. This position will be one of the primary customer contacts and provide sound decision making and detailed analysis of the customer's account with clear communication both internal and externally. Duties and Responsibilities Responsible for collection activities of the assigned portfolio, including but not limited to ensuring consistent, timely follow-up, as well as, and adherence to the standards of responsible collection practices. Provide analysis and feedback to manager explaining variances in customer cash trends. Make collection calls/emails and follow up to customers within a "customer focused" framework, leading to the resolution of payment issues, by proactive Identification and resolution methods. Analyze customer invoices to ensure contract terms and conditions are being followed. Ability to utilize CRM (Customer Relationship Management) tool to help solve issues. Gather credit and/or collections reference information, as required when needed. Perform Credit analysis for new and existing accounts. Complete ad hoc projects and related deliverables, as assigned. Proven ability to manage competing priorities under tight deadlines. Qualifications/Requirements Should have a basic understanding of financial, legal documents and accounting concepts. Proactive, organized, and demonstrate a high level of self-motivation. Must have strong general knowledge of the billing and collections process cycles. Must possess strong written and verbal communication skills with the ability to articulate challenges and present actions and solutions, along with excellent customer service skills. Can work well under pressure while maintaining a professional and positive demeanor and continually multi-task to meet deadlines. Ability to work effectively in a matrix organization using interdepartmental communication. Strong negotiation skills and use solid judgment in changing a customer's objections into a commitment to pay. Enjoy working in a fast-paced environment and are comfortable working on a variety of different tasks. Works closely with the manager to maintain high quality standards. Must be local to one of our office locations. (Bethpage NY, NYC, Golden CO, Wakefield MA, White Plains NY). Education Eligible candidates should be entering their senior year of an undergraduate program or be recent graduates of an undergraduate or master's program. Experience in and using multi-company accounting software package - Netcracker and SalesForce Preferred. Requires enrollment in a 4-year college degree, preferably in accounting or Business. Complete knowledge and functionality of the Microsoft 2010 Office product suite. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in Massachusetts. The pay range at the time of posting in the specified locations is $18.00- $20.00/hour. Pay ranges are supplied in compliance with Massachusetts law. Pay is competitive and based on a number of job-related factors, including skills and experience.

Full-time Description What You Will Do: We are seeking a Welder Apprentice to learn the skills and techniques necessary to become a professional welder. The Welder Apprentice will assist experienced welders with various tasks such as cutting, grinding, welding and fitting metal parts. This position requires a willingness to perform physical labor and learn from a team of experienced professionals. Assist welders in setting up and preparing weld surfaces, equipment, and materials as needed Cut and grind metal pieces to fit properly and remove any impurities Perform basic welding tasks using MIG, TIG, and stick welding techniques Clean and maintain welding equipment and tools daily Move materials and equipment as directed by lead welders Learn and follow safety guidelines and procedures at all times while performing welding tasks Collaborate with other team members to complete projects on time and to performance expectations Attend mandatory safety meetings and training sessions Assist fabrication team with various tasks (Sawing, Rolling, Bending, Fit up) Assist in assembly of product packages Assist in painting and sandblasting as needed Read blueprints and drawings and take measurements to plan layout Align parts using calipers, tape measures, etc. and clamp pieces. Test and inspect welded surfaces and structure to determine flaws Perform dimensional checks throughout the process to ensure that tolerances are adhered to according to blueprints Confer with engineering, supervisor and manufacturing team members to exchange technical information Assist in the design of fixtures and tooling to meet special engineering needs Communicate effectively with the team to clarify instructions and address production issues Be willing to Float to other Departments to meet production demands as needed Work required overtime periodically The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any time with or without notice Work schedule: Monday through Friday - 6:15 am - 2:45 pm. 30-minute lunch break Requirements Requirements: Education: High School Diploma or equivalent Experience: Previous welding experience and experience operating forklift preferred, Microsoft platform proficient Functional Skills: Ability to work in a physically demanding environment and lift up to 50 pounds. Excellent hand-eye coordination and attention to detail Language Skills: Proficiency in the English language, both written and verbal, is essential for effective communication with team members, documenting work, and ensuring safety in the workplace. Culture Match Behaviors: Commitment to safety - Collaborative -Inquisitive - Strong work ethic -Flexibility -Continuous improvement. Ability to stand, sit, walk, bend, reach, stoop, squat, kneel, twist, push, pull, and carry items frequently Aerzen USA Corp is an equal opportunity employer and selects employees on the basis of skills and experience. Aerzen USA ensures that all persons are entitled to equal employment opportunity without regard to race, color, gender, gender identity, sexual orientation, pregnancy, age, national origin, religion, marital status, ancestry, disability, veteran's status, and any other characteristic protected under applicable federal, state, or local laws. All employment decisions and actions are based on merit and made without regard to any characteristic protected by state, federal or local law. All offers of employment at Aerzen USA Corp are contingent upon clear results of a thorough background check. In compliance with the Drug-Free Workplace Act of 1988, Aerzen USA Corp has a longstanding commitment to provide a safe, quality-oriented, and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of Aerzen employees and to the security of the company's equipment and facilities. For these reasons, Aerzen USA Corp is committed to the elimination of drug and alcohol use and misuse in the workplace. Applicants being considered for hire must pass a drug test before beginning work. Refusal to submit to testing will result in disqualification of further employment consideration. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including termination of employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. Salary Description $18.00 - $21.00 hourly

Intern - Network Planning & Engineering Job ID: 554167490 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. We're looking for interns who are eager to learn, contribute, and grow in a collaborative environment. As an intern, you'll have the opportunity to: Work closely with team members on meaningful projects that drive results. Collaborate across departments, gaining exposure to different areas of the business. Explore and apply AI tools and technologies as part of project work and problem-solving. Be an active part of a supportive, team-oriented culture. Contribute fresh ideas and take ownership of tasks that make an impact. Job Summary The Network Planning & Engineering Intern will be responsible for modelling equipment within Netcracker and establishing a dashboard within Tableau. The Intern will be working on uploading documents onto the Engineering Wiki page. Although the Intern will work in a team-based environment, it is expected that he/she will be self-motivated, have good attention to detail and able to complete work tasks with an outstanding professional attitude. Duties and Responsibilities Creating Network Device Grooming Tool / Report to vet through all TDM Trunks and identify trunks with no Child Circuits for disconnect and to consolidate low utilized TDM trunks within Netcracker. Create RFA AI Agent Search Tool: an AI BOT to source the Engineering Wiki to answer RFA potential questions. Present project ideas to individuals and groups. Provide a weekly status report with the Network Engineering Management and Team. The Intern will work closely with all related management teams to fulfill business requirements and contribute to successful implementation of project. The Intern will work with the Transport Engineering team to perform data mining efforts within Netcracker and develop a summarized report within Excel. Transport Engineering and Capacity Planning team to create an AI BOT to answer RFA questions from the Lightpath Fulfillment business units sourcing the Network Planning and Engineering Wiki page. Qualifications Eligible candidates should be entering their senior year of an undergraduate program or be recent graduates of an undergraduate or master's program. Candidates must be local to one of our office locations. Bethpage NY, NYC, Golden CO, Wakefield MA, White Plains NY. Bachelor's Degree-in progress or higher in Computer Applications and Machine Learning or related discipline from an accredited program. 0 to 3 years of professional experience, ideally in Telecommunication experience or closely related field. Demonstrated understanding of optical theory, transport technologies and the operation of optical transport systems (including SONET, SDH, DWDM (ROADM and OADM). Experience with Netcracker or similar Planning and Provisioning tools. Strong working knowledge of Microsoft Office, Visio & various operational Support Systems for internal and external presentations and complex network schematics. Have basic knowledge and skills related to programming in Python and machine learning models. Ability to work in a collaborative environment and willingness to convey ideas among team. Excellent verbal, written, and interpersonal communication skills. Experience in problem solving with stakeholders, clients, and teammates. Ability to work and learn independently. Ability to build and foster collaborative relationships. Strong problem-solving skills, self-management and the ability to multitask. Excellent Documentation and Communication ability. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in New York State. The pay range at the time of posting in the specified locations is $18.00- $20.00/hour. Pay ranges are supplied in compliance with New York State law. Pay is competitive and based on a number of job-related factors, including skills and experience.

IDRA Education Law Course-Credit Internship Application IDRA is an independent, national, non-profit organization led by Celina Moreno, J.D. For over 50 years, IDRA has advocated educational justice through legal and policy advocacy, research, community engagement, and student and educator leadership development. Our mission is to achieve equal educational opportunity for every child through strong public schools that prepare all students to access and succeed in college. About the Education Law Internship IDRA's Education Law Internship is designed for law students passionate about educational equity, civil rights and movement lawyering. Interns will gain hands-on experience working within an interdisciplinary team committed to protecting and advancing the rights of students and families in public schools across the U.S. South. This internship is open to law students pursuing a J.D. (or equivalent) capable of performing staff-level work under minimal supervision. The internship is intended for students seeking academic course credit, and all credit arrangements must be handled directly between the student and their university. IDRA will provide supervision, engage in mentorship, and complete all required institutional documentation to support the student throughout the internship. Intern Responsibilities Education law clerks support the work of IDRA's legal and policy, advocacy and community engagement teams. Under the supervision of the Chief Legal Analyst, interns may: Research and draft analyses of developments in education law Assist with preparing amicus briefs, legal advocacy letters and other legal communications Participate in internal and external strategy sessions for civil rights litigation Support the drafting of legal complaints related to education justice Contribute to investigations of civil rights concerns in K-12 and higher education Conduct research related to school discipline, censorship, immigrant student rights, harassment and bullying and other civil rights issues Assist with advocacy projects, policy review and community engagement efforts Participate in team meetings, strategy discussions and project planning Complete administrative or project coordination tasks as needed Project assignments are matched to the intern's strengths, interests and academic goals, as well as IDRA's ongoing legal needs. Areas of Special Interest IDRA is particularly interested in applicants with experience or interest in: Movement and community lawyering School funding and legal issues relating to school privatization School discipline and school safety Identity-based bullying and harassment Immigrant student rights Censorship in K-12 and higher education Civil rights and education justice advocacy Ideal Candidate Traits Authentic connection to and compassion for marginalized students and their communities A demonstrated commitment to equal educational opportunity and civil rights Excellent written and verbal communication skills Strong time management and ability to multi-task High attention to detail and commitment to quality Ability to work independently and in a team setting Curiosity and passion about education law and policy issues Self-motivation, reliability and strong ethical judgment Ability to present oneself professionally Program Structure Format: Fully remote Duration: Approximately 8-10 weeks (varies by semester and university requirements) Start Date: Flexible, based on academic term Weekly Hours: 15-30 hours per week, depending on internship course requirements Compensation: Unpaid. This internship is intended for course credit. Students are encouraged to seek school-based or external public interest funding if available. Academic Credit: All credit arrangements must be coordinated directly between the student and their university. IDRA is an equal opportunity employer. Please email Paige Duggins-Clay, J.D., (***************************) or Claribel Tirú (**********************) if you have any further questions concerning IDRA's education law internship program.

We are seeking a detail-oriented and motivated CAD Engineering Technician Intern to join our Millwork Solutions Engineering team. This internship offers hands-on experience in drafting and modeling custom millwork components using industry-standard tools like Microvellum and Autodesk Inventor. You'll work closely with experienced engineers and designers to support the creation of precise 3D CAD models and technical documentation for production. KEY RESPONSIBILITIES: Create and modify detailed 3D CAD models and 2D drawings using Microvellum and Inventor. Assist in the development of custom millwork designs and engineering solutions. Interpret architectural and engineering drawings to produce accurate shop drawings. Collaborate with engineers and production teams to ensure design intent and manufacturability. Maintain drawing standards and file organization within the engineering database. Support the documentation of design processes and best practices. Requirements Currently pursuing or recently completed a degree or certification in Drafting, CAD Technology, Mechanical Engineering Technology, or a related field. Proficiency in Autodesk Inventor and familiarity with Microvellum or similar woodworking/CAD software. Strong attention to detail and ability to follow technical specifications. Basic understanding of millwork or cabinetry manufacturing is a plus. Excellent communication and organizational skills. BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

As a Photography Intern, you'll take a lead role in creating and executing photoshoots for multiple events across the company. You'll apply your technical photography skills while learning new techniques and making a meaningful impact on various teams. Supporting our internal photography team, you'll cover events and assist with brand-level photography shoots, utilizing your camera operation skills and editorial/retouching abilities to deliver high-quality visual content that meets our brand standards. About the Role * Shoot and edit photos of company events and brand activations * Assist with photoshoots and support other photographers on larger scale productions * Produce various types of photography including headshots, lifestyle, and workplace culture content * Manage assets on the internal digital asset manager * Produce and manage personal shoots and schedule * Collaborate with other teams to meet creative and marketing needs * Edit and retouch photos to ensure brand standards are met About you Minimum Qualifications * Strong written and verbal communication skills * Proficiency in Adobe Creative Suite (Photoshop, Lightroom) * Solid foundation of photography basics * Ability to work on multiple projects with tight deadlines in a fast-paced environment * Currently enrolled in a photography, visual arts, or related degree program Preferred Qualifications * Previous internship or work experience in photography * Portfolio demonstrating photography skills and creative vision * Experience with event photography * Knowledge of digital asset management systems What you'll get Our team members fuel our strategy, innovation and growth, so we ensure the health and well-being of not just you, but your family, too! We go above and beyond to give you the support you need on an individual level and offer all sorts of ways to help you live your best life. We are proud to offer eligible team members perks and health benefits that will help you have peace of mind. Simply put: We've got your back. Check out our full list of Benefits and Perks. About us Rocket Mortgage was founded in 1985. Today, we're a Detroit-based, publicly traded company with a mission to Help Everyone Home. At Rocket Mortgage, we believe that home is more than the house you live in. Our wide variety of home loan options, tools and resources empower our clients to achieve their homeownership dreams. We're known as experts in the mortgage industry, but we're also innovators - we strive to create the best experiences for our clients from beginning to end. And we're not your typical employer. We're insistently different in how we look at the world and are committed to an inclusive workplace where every voice is heard. Apply today to join a team that offers career growth, amazing benefits and the chance to work with leading industry professionals. This job description is an outline of the primary responsibilities of this position and may be modified at the discretion of the company at any time. Decisions related to employment are not based on race, color, religion, national origin, sex, physical or mental disability, sexual orientation, gender identity or expression, age, military or veteran status or any other characteristic protected by state or federal law. The company provides reasonable accommodations to qualified individuals with disabilities in accordance with applicable state and federal laws. Applicants requiring reasonable accommodations in completing the application and/or participating in the application process should contact a member of the Human Resources team, at **************************.

Who We Are Lennox National Account Services (NAS), wholly owned by Lennox International, a 120+ year old company and a world leader in the Heating, Ventilation and Air Conditioning (HVAC) industry. NAS is a major, national player in the Commercial Heating Ventilating and Air Conditioning (HVAC) maintenance and service industry. We have 100+ offices throughout the continental United States and are still growing and expanding. In the next 5 years we will double the number of Branch Offices and significantly increase annual revenue. In order to so we need good people like you, who want to grow and learn. We consistently offer the best of both to all our employees. We are an equal opportunity employer (EEOC). What's in it for you? * Competitive Pay with weekly payroll * Overtime available to increase earnings potential. * Company paid vacation, personal days & holidays. * Company vehicle (after training is completed and successful graduation from leveling class), phone, PPE and uniforms provided. * Ongoing training and development with nationwide opportunities Benefits: For information regarding our impressive benefits package, please visit our website at: LII Benefits. We have matching 401(k), comprehensive health and wellness, perks and discounts, pet insurance, free subscriptions and much more! Note: benefits may vary depending on the position and are subject to change. What Drives Success This is an entry level opportunity for that individual looking to jump start their career. NAS employees are our most important assets. They are productive, challenged, well trained, promoted, and well compensated. This technician performs field activities associated with supporting the installation, maintenance, and servicing of heating, ventilating and air conditioning systems for commercial customers. Duties include: * Assist with on-site preventative maintenance, routine repair and calibration after installation. * Uses technical abilities to maintain systems. * Works in a team-based environment to share information and workload while ensuring customer satisfaction. * Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times. * Performs other duties as assigned. * Flexibility to work overtime, on-call and weekends required. What We Are Looking For * High School diploma or GED equivalent * HVAC Trade school graduate strongly preferred achieving 3.5 GPA and excellent attendance. * 1+ years in mechanical support role, some hands-on HVAC experience preferred * EPA Certification- Type I & Type II or Universal Preferred * NATE certification a plus * Valid Driver's License and acceptable driving record * Ability to climb ladders. * Moderate lifting (up to 90 pounds) * Technical aptitude to perform maintenance, service, and troubleshoot equipment. * Excellent Customer Service Skills * Good Electrical and Mechanical Diagnostic Skills * Ability to complete repairs and required paperwork. * Ability to work independently and self-schedule. * Self-motivated to complete assigned tasks within time constraints. * Driven to succeed and able to work with minimum supervision. * Periodically 'on call' for service coverage * Must be willing to relocate to another part of country once training is completed. * Local travel may be required. Physical Requirements: Technicians install, repair, and perform preventative maintenance on commercial, rooftop HVAC units. This work is often done independently. As such, Technicians must be able to safely: * Get themselves and necessary tools/equipment onto the rooftop - typically via fixed/extension ladder. * Work at heights * Load and unload tools/equipment from work van * Lifting occasionally up to 75lbs. * Lifting to shoulder and overhead occasionally up to 25 lbs. * Push/pull wheeled cart up to 150 lbs. * Climb ladder up to roof height. * Extend reach overhead in a repetitive motion. * Manual tandem lifting load up to 125 lbs What We Offer Compensation: This is an hourly non-exempt role. The salary range for this role and market is between $33,000 - $41,000 annually. Factors that may affect the starting salary include geography/market and the individual's tenure, performance, skills, education, experience, and other qualifications of the successful candidate. Employees in this role are not eligible for a bonus but do earn overtime when they work more than 40 hours in a week (or as otherwise required by state law). Benefits: Subject to applicable eligibility requirements, the following benefits are offered for this role: tuition reimbursement; medical, dental, and vision insurance; prescription drug coverage; 401(k) retirement plan; short-term disability insurance; 8 weeks paid birthing leave; 2 weeks paid bonding leave; life and long-term disability insurance. Depending on date of hire, and subject to applicable eligibility requirements, new employees in this role also receive up to: 10 days paid time off and 10 paid holidays. Our Culture:At Lennox, our Core Values of Integrity, Respect & Excellence are ingrained in the fabric of the organization. They define our culture - which is about how we do business and how we treat others. Lennox is not just a workplace; we are a global community that values each team member's contributions. As an equal opportunity employer, we are committed to recruit, develop, and retain talented individuals from a wide range of backgrounds, ensuring that everyone has the opportunity to succeed and contribute to our continued growth and success. At Lennox, you'll take pride in our brands, knowing you are part of something special. Come, stay, and grow with us! Disclaimers: The compensation and benefits information is accurate as of the date of this posting. Lennox reserves the right to modify this information at any time, with or without notice, subject to applicable law.

About Us: Loloi Rugs is a leading textile brand that designs and crafts rugs, pillows, and throws for the thoughtfully layered home. Family-owned and led since 2004, Loloi is growing more quickly than ever. To date, we've expanded our diverse team to hundreds of employees, invested in multiple distribution facilities, introduced thousands of products, and earned the respect and business of retailers and designers worldwide. A testament to our products and our team, Loloi has earned the ARTS Award for “Best Rug Manufacturer” in 2010, 2011, 2015, 2016, 2018, 2023, and 2025. Security Advisory: Beware of Frauds Protect yourself from potential fraud and verify the authenticity of any job offer you receive from Loloi. Rest assured that we never request payment or demand any sensitive personal information, such as bank details or social security numbers, at any stage of the recruiting process. To ensure genuine communication, our recruiters will solely reach out to applicants using an @loloirugs.com email address. Your security is of paramount importance to us at Loloi, and we are committed to maintaining a safe and trustworthy hiring experience for all candidates. Loloi is seeking talented and artistic candidates for our Summer 2026 Internship Program. As an intern for product design, you will be immersed in the various functions that contribute to the broader scope of our talented design team. You will gain valuable hands-on experience in every aspect of product design and pattern making. You will get to see how our talented design team interacts across other departments as you will be heavily exposed to those facets of the business. As an intern, you will join a team of talented and results-minded artists, leaders, and critical thinkers all driving toward the same goal - to delight customers and drive sales through multiple channels. We have two amazing, talented design teams at Loloi, and both are first among equals. Both teams create rugs, pillows, and wall art for their respective customer bases, including some of America's top retailers. One team focuses on some of the biggest U.S. national retailers while the other team focuses on the smaller independent retailers and/or collections. In addition to day-to-day responsibilities, all interns will participate in real-world business meetings. You will join a diverse group of individuals from a variety of colleges, universities, and areas of study. Our interns don't just get the grunt work; they are a valuable part of our small team and will have a lasting impact on the Loloi brand. Intern performance will be assessed using our internal review process and could potentially lead to a full-time offer. To apply, please include your updated portfolio or website within your application/resume. The deadline to apply is January 31, 2026. Please note this internship is a duration of 10-weeks, and is located at our headquarter office in Dallas, TX (June 15-August 21). Some highlights of our internship program include: Paid Internship + monthly living stipend Work in our corporate headquarter office 5 days a week (Dallas, TX) Team building and networking activities Group projects and career-building workshops Leadership and cross-functional learning opportunities Assigned mentor focused on your growth and development The Intern experience at Loloi is a comprehensive development-based role, designed to facilitate a robust Textile Product Design career path. Interns will be immersed in the various functions of the business that contribute to the broader scope of the Textile Product Design model, gaining valuable hands-on experience in skill competency areas. Successful Textile Product Design candidates will have the following knowledge, skills and abilities: Strong industry knowledge and passion for textiles Basic fit and pattern making skills Ability to work with a variety of work styles as well as the ability to work independently, flexible Instinct and passion for product and design Innovative, critical thinker with the ability to continuously operate strategically and work cross-functionally Strong leadership skills and communication skills, proven relationship builder Working toward a degree in product design or related field Loloi Rugs does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits. We seek a diverse pool of applicants and consider all qualified candidates regardless of race, ancestry, color, gender identity or expression, sexual orientation, religion, national origin, citizenship, disability, Veteran status, marital status, or any other protected status. If you have a special need or disability that requires accommodation, please let us know.

As a Community Management and Social Listening Intern at Rocket Pro, you'll play a vital role in monitoring broker conversations across social media platforms and identifying emerging trends that shape our online strategy. You'll gain hands-on experience analyzing social sentiment, contributing to weekly insight reports, and helping with community engagement activities that directly influence how our national brand responds to real-time broker needs. This internship offers you the opportunity to support some of our largest events while developing expertise in social listening tools and digital community management. About the role * Monitor social sentiment across platforms including Meta, LinkedIn, X, and Instagram to track broker conversations * Analyze trends using social listening tools and summarize key insights for weekly reports * Support community management efforts by assisting with basic engagement activities * Track and analyze audience reactions and sentiment during and after Rocket Pro events * Identify emerging themes and patterns in broker conversations that inform strategic decisions * Create process improvements based on audience comments and reactions * Learn about our business by attending meetings, huddles and trainings * Contribute creative ideas that help improve our business operations About you Minimum Qualifications * Currently enrolled in a college or university program * Strong written and verbal communication skills * Basic understanding of social media platforms and their unique audiences * Ability to work independently and manage multiple priorities Preferred Qualifications * Self-directed approach to work and problem-solving * Experience with social media analytics or listening tools * Proficiency in the Microsoft Office suite, including Excel, PowerPoint and Word * Interest in financial services, mortgage industry, or broker relationships * Previous experience with data analysis or trend reporting What you'll get Our team members fuel our strategy, innovation and growth, so we ensure the health and well-being of not just you, but your family, too! We go above and beyond to give you the support you need on an individual level and offer all sorts of ways to help you live your best life. We are proud to offer eligible team members perks and health benefits that will help you have peace of mind. Simply put: We've got your back. Check out our full list of Benefits and Perks. About us Rocket Mortgage was founded in 1985. Today, we're a Detroit-based, publicly traded company with a mission to Help Everyone Home. At Rocket Mortgage, we believe that home is more than the house you live in. Our wide variety of home loan options, tools and resources empower our clients to achieve their homeownership dreams. We're known as experts in the mortgage industry, but we're also innovators - we strive to create the best experiences for our clients from beginning to end. And we're not your typical employer. We're insistently different in how we look at the world and are committed to an inclusive workplace where every voice is heard. Apply today to join a team that offers career growth, amazing benefits and the chance to work with leading industry professionals. This job description is an outline of the primary responsibilities of this position and may be modified at the discretion of the company at any time. Decisions related to employment are not based on race, color, religion, national origin, sex, physical or mental disability, sexual orientation, gender identity or expression, age, military or veteran status or any other characteristic protected by state or federal law. The company provides reasonable accommodations to qualified individuals with disabilities in accordance with applicable state and federal laws. Applicants requiring reasonable accommodations in completing the application and/or participating in the application process should contact a member of the Human Resources team, at ******************.

As a Copywriting Intern at Rocket, you'll collaborate with experienced copywriters and integrated creative teams to develop compelling marketing collateral for various brand campaigns. You'll gain hands-on experience crafting copy across multiple platforms while receiving valuable mentorship from industry professionals. This internship offers an exciting opportunity to build your portfolio, develop your creative voice, and contribute to meaningful projects. About the role * Create copy for Rock Family of Companies branded internal and external materials under the mentorship of the copywriting team * Write engaging content for print, video, social media, email and other digital mediums * Attend informational kick-off meetings to learn the scope and responsibilities of each assigned project * Prepare and deliver presentations to leadership teams * Coordinate projects and manage workflow to meet deadlines * Complete tasks as requested by team members * Collaborate with cross-functional teams to ensure brand consistency across all materials About you Minimum Qualifications: * Currently pursuing a degree in journalism, marketing, communications, or related field * Proficiency in Microsoft Office suite * Strong written and verbal communication skills * Ability to manage time effectively and meet deadlines * Previous writing experience or portfolio of work samples Preferred Qualifications: * Creative thinking skills and innovative approach to content development * Self-motivated mentality with ability to work independently * Interest in pursuing a career in journalism, marketing, or communications * Experience with content management systems or digital publishing platforms What you'll get Our team members fuel our strategy, innovation and growth, so we ensure the health and well-being of not just you, but your family, too! We go above and beyond to give you the support you need on an individual level and offer all sorts of ways to help you live your best life. We are proud to offer eligible team members perks and health benefits that will help you have peace of mind. Simply put: We've got your back. Check out our full list of Benefits and Perks. About us Rocket is a Detroit-based company made up of businesses that provide simple, fast and trusted digital solutions for complex transactions. The name comes from our flagship business, now known as Rocket Mortgage, which was founded in 1985. Today, we're a publicly traded company involved in many different industries, including mortgages, fintech, real estate and more. We're insistently different in how we look at the world and are committed to an inclusive workplace where every voice is heard. Apply today to join a team that offers career growth, amazing benefits and the chance to work with leading industry professionals. This job description is an outline of the primary responsibilities of this position and may be modified at the discretion of the company at any time. Decisions related to employment are not based on race, color, religion, national origin, sex, physical or mental disability, sexual orientation, gender identity or expression, age, military or veteran status or any other characteristic protected by state or federal law. The company provides reasonable accommodations to qualified individuals with disabilities in accordance with applicable state and federal laws. Applicants requiring reasonable accommodations in completing the application and/or participating in the application process should contact a member of the Human Resources team, at **************************.

If you're looking for a special place to build or grow your career, you've found it. Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impact. With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses (*********************************************************** around the globe, chances are, we have something special for you. **SUMMARY OF JOB RESPONSIBILITIES** **:** In this role, the intern has the opportunity to assist and learn the Supply Chain and Procurement function of the business. This will be an onsite role at our Wooster, OH location. Must be able to work 20-40 hours a week on average, with flexibility for planned vacations, class schedule, and starting Spring semester. **REPORTS TO (Title)** : Purchasing Supervisor **ESSENTIAL DUTIES AND RESPONSIBILITIES:** + Manage and complete department assigned project(s) and tasks in a timely and effective manner + Collaborate with different members of the supply chain team, as well as collaborate cross functionally across the business **KNOWLEDGE, SKILLS AND REQUIRED ABILITIES:** + Analytical and problem-solving skills + Strong communication skills + Ability to work in a fast paced environment **EDUCATION AND EXPERIENCE:** + Pursuing Bachelor's Degree in Procurement, Supply Chain, Finance, Business, Operations Management or other related field is required + Experience working with Microsoft Office Suite - Word and Excel experience required Are you ready to join a different kind of company where our people, our culture, and our commitments are centered around providing trusted solutions that improve lives around the world? **IDEX is an Equal Opportunity Employer** . IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws. **Attention Applicants:** If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at ********************** for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application. **Job Family:** Administrative **Business Unit:** Akron Brass