Manufacturing Engineer jobs at ITW - 43 jobs

BASIC FUNCTION The Quality/Process Engineer will lead important quality control, quality assurance, and process improvements initiatives, including product and material non-conformances, root cause analyses, corrective actions, lean implementation (Front to Back Initiatives), continuously reduction of waste, and implementation of safety, quality, productivity, and cost improvement activities. Working closely with manufacturing, R&D, sourcing, engineering & Maintenance, EHS, and outside vendors, this person plays an important role in ensuring product compliance, quality output, customer satisfaction, and continuous improvement in safety, productivity and cost. Additionally, this person will contribute to ISO 9001:2015 efforts, ensuring adoption, compliance, and effectiveness throughout the organization. Notice: Applicants must be currently authorized to work in the United States on a full-time basis. We are unable to sponsor or take over sponsorship of employment visas at this time. JOB DUTIES Promotes and follows all safety guidelines and procedures. Recommend safety improvements as needed. Overall product quality. From raw materials to WIP to finished goods, the Quality/Process Engineer is responsible for reviewing, analyzing, and addressing quality complaints and compliance. Identify opportunities to improve and streamline process efficiency and effectiveness to continuously improve OEE. Measure and continuously eliminate waste from the manufacturing process by implementing ITW Tool Box (Lean Practices). Training in Quality and Operational Activities and Front to Back Toolbox. Define Quality controls for the Manufacturing Processes and maintain registers of quality controls for audit processes Implement Standard Operating Procedures, training material, and visual support for Manufacturing Processes to facilitate operations Issue non-conformances (SCAR - CAR) - both internally and with outside vendors. Place materials on hold as needed. Conduct root cause analyses for quality and operational issues, implementing corrective actions. Develop and implement corrective actions. Follow up to determine if corrective actions have been effective. Track quality complaints and non-conformances. Identify trends and opportunities. Generate monthly reports to share with management. Show improvement in overall quality through reduction in complaints, non-conformances, improvement in customer satisfaction, etc. Conduct internal audits to ensure compliance with work instructions, quality specifications, and SOPs. Identify opportunities and solutions for process improvements resulting in higher OEE. Support vendor audit program, attending and conducting regular audits with our top suppliers when required. Contribute to ISO 9001:2015 efforts across the organization. This includes semi-annual ISO audits, annual QMS audits, and management review meetings. Develop a robust understanding of our products and manufacturing processes. Manage/Operate process equipment and device calibration program. Backup and support others operational roles Additional duties as assigned QUALIFICATIONS Bachelor's Degree in Engineering, technology, or related area. 4-7 years of work experience in QC/QA and Continuous Improvements Roles; 2-3 years in chemical field. Demonstrated ability to work efficiently with minimal supervision. Self-starter with initiative and follow through. Demonstrated peer leadership. Experience with data analysis and reporting. Results driven. Desire to show improvement and impact. Team player willing to do what it takes to get the job done and pitch in where needed. Strong interpersonal skills and ability to work well with others. This person will partner with many departments and functional areas and will need to develop effective relationships. Excellent communication skills with all levels of an organization. Clear communication and follow through are important for success. Curiosity and ability to trouble shoot. Computer literate and strong organization skills. Compensation Information: $0.00-$0.00 ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Corporation Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. The team you will be a part of The Operations/Production team plans, directs and monitors all production activities within an assigned area or unit to maximize the use of the organization's resources and meet established production specifications, schedules and quality standards. Liaise with functional or operational area managers to understand their current and future product needs and develop plans, cost estimates, and schedules for integrating these needs into existing manufacturing activities. This role in summary We are seeking qualified candidates for a Manager, Operations & Production to join our Clyde Operation located in Clyde, OH. This position will provide leadership in strategic decision making as well as manage operational excellence for our specialty products including front load and commercial washers. This role requires leadership of an operations function utilizing world-class manufacturing methodology to deliver key business metrics. This position is responsible for managing processes and people to meet metrics, inclusive of safety, quality, delivery, and cost. Your responsibilities will include * Drive safety, quality, delivery, and productivity of the department and Operations through effective leadership * Lead the development and execution of Operational Strategic Initiatives at Clyde Operations including operationalizing and leading WCM and providing strategic vision within the Factory Master Plan. * Provide direction to the team to focus and deliver KPIs. * Champion diversity and inclusion behaviors. * Proactively seek and value all types of diversity and work to bring out the contributions of everyone * Actively coach and provide feedback to peers, subordinates, and others as appropriate, developing future talent. * Build organizational capability through proactive coaching of the direct reports on skill-building and career development * Drive and lead continuous improvement in the organizational, technical and business information processes/systems through Lean/innovative thinking/ideas plant wide. * Be a proactive leader of lean manufacturing and WCM methodologies in business processes and lead the organization in the enterprise-wide lean implementation. * Manage all financial aspects of the business. Minimum requirements * 5+ manufacturing or related experience * Bachelor's Degree Preferred skills and experiences * World Class Manufacturing (WCM) Pillars * Lean principles and philosophies * Core understanding of business metrics measuring Safety, Quality, Delivery, and Cost * Experience driving Operational Excellence initiatives * Continuous Improvement (CI) operations within established quality systems * PC and mainframe applications related to responsibilities * Willingness to take calculated risks, implement new ideas, drive for results and sustain change * Coach, mentor, lead and inspire an engaging work environment * Champion for challenging existing practices and driving innovative solutions * Interpersonal skills and ability to manage conflict resolution * Manage priorities and accountabilities * Attract and develop talented people as well as effectively allocating and utilizing resources Additional information Whirlpool's Ways of Working Our goal is to provide an environment that helps you bring your best to Whirlpool every day. While employees in this role work in-person Monday through Friday. We offer flexibility and industry-leading time-off benefits that will help you balance what's important at work and at home, including: * Always On Flexibility - You will have the autonomy to manage personal, family, and outside-of-work commitments as needed. * Two-Week Work from Anywhere - Minimum of one-week increments for a total of two weeks per year. * Sabbatical - Four weeks paid leave after every five years of service. #LI-NL1 Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

**Requisition ID:** 70087 Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including _Whirlpool_ , _KitchenAid_ , _JennAir, Maytag_ , _Amana,_ _Brastemp_ , _Consul_ , and _InSinkErator_ . In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com . **The team you will be a part of** The Operations/Production team plans, directs and monitors all production activities within an assigned area or unit to maximize the use of the organization's resources and meet established production specifications, schedules and quality standards. Liaise with functional or operational area managers to understand their current and future product needs and develop plans, cost estimates, and schedules for integrating these needs into existing manufacturing activities. **This role in summary** We are seeking qualified candidates for a Manager, Operations & Production to join our Clyde Operation located in Clyde, OH. This position will provide leadership in strategic decision making as well as manage operational excellence for our specialty products including front load and commercial washers. This role requires leadership of an operations function utilizing world-class manufacturing methodology to deliver key business metrics. This position is responsible for managing processes and people to meet metrics, inclusive of safety, quality, delivery, and cost. **Your responsibilities will include** + Drive safety, quality, delivery, and productivity of the department and Operations through effective leadership + Lead the development and execution of Operational Strategic Initiatives at Clyde Operations including operationalizing and leading WCM and providing strategic vision within the Factory Master Plan. + Provide direction to the team to focus and deliver KPIs. + Champion diversity and inclusion behaviors. + Proactively seek and value all types of diversity and work to bring out the contributions of everyone + Actively coach and provide feedback to peers, subordinates, and others as appropriate, developing future talent. + Build organizational capability through proactive coaching of the direct reports on skill-building and career development + Drive and lead continuous improvement in the organizational, technical and business information processes/systems through Lean/innovative thinking/ideas plant wide. + Be a proactive leader of lean manufacturing and WCM methodologies in business processes and lead the organization in the enterprise-wide lean implementation. + Manage all financial aspects of the business. **Minimum requirements** + 5+ manufacturing or related experience + Bachelor's Degree **Preferred skills and experiences** + World Class Manufacturing (WCM) Pillars + Lean principles and philosophies + Core understanding of business metrics measuring Safety, Quality, Delivery, and Cost + Experience driving Operational Excellence initiatives + Continuous Improvement (CI) operations within established quality systems + PC and mainframe applications related to responsibilities + Willingness to take calculated risks, implement new ideas, drive for results and sustain change + Coach, mentor, lead and inspire an engaging work environment + Champion for challenging existing practices and driving innovative solutions + Interpersonal skills and ability to manage conflict resolution + Manage priorities and accountabilities + Attract and develop talented people as well as effectively allocating and utilizing resources **Additional information** Whirlpool's Ways of Working Our goal is to provide an environment that helps you bring your best to Whirlpool every day. While employees in this role work in-person Monday through Friday. We offer flexibility and industry-leading time-off benefits that will help you balance what's important at work and at home, including: + Always On Flexibility - You will have the autonomy to manage personal, family, and outside-of-work commitments as needed. + Two-Week Work from Anywhere - Minimum of one-week increments for a total of two weeks per year. + Sabbatical - Four weeks paid leave after every five years of service. \#LI-NL1 Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers (********************************* . Additional information about the company can be found on Facebook (*************************************** , Twitter (********************************* , LinkedIn (************************************************************ , Instagram (**************************************** and YouTube (************************************************* . Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

At Parker Aerospace, we develop technologies and innovative solutions that enable reliable, efficient and increasingly sustainable flight for the lifecycle of the aircraft, including aftermarket support. Our passionate people with deep engineering expertise, together with our breadth of differentiated technologies, ensure that we make the extraordinary happen and continue to shape the future of aviation in partnership with our customers. As a member of our team, you are instrumental in fulfilling our mission: 'Enabling Engineering Breakthroughs that Lead to a Better Tomorrow.' Onsite Summer Internship Opportunity! We are seeking a motivated and eager Electro-Mechanical Manufacturing Engineering Intern to join our team. In this role, you will provide producibility input and manufacturing plans for product design or modification. This is a great opportunity for someone looking to gain experience in the engineering field. This role will be onsite in Mentor, OH (please note that we are not offering relocation or housing for this internship). Responsibilities * Evaluates manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians. * Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequence of manufacturing operations for products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides producibility input and manufacturing plans for product design or modification. * Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel. * Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned area(s). * Preparing presentation materials and other related documentation as needed by the department. * Assist with special project assignments as required to meet deadlines. * Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. * Recommends changes to refine and enhance products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. * Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May provide on-site support to address technical issues at supplier base. * Prepares product and process reports by collecting, analyzing, and summarizing information and trends. * Ability to work in a professional, fast paced, and deadline driven environment. * Experience working both independently and within a Team environment. Qualifications * Currently enrolled in college with major in Manufacturing Engineering, Electrical Engineering, Aerospace, or related engineering field. * Required Strong attention to detail, organized, and the ability to take initiative, prioritize, and complete tasks as needed. * Competency in, and effective use of, computer systems that are necessary to perform job responsibilities. * Skilled at writing and communicating clearly and effectively. * Ability to think independently and solve problems quickly and effectively. * Demonstrated ability to perform the essential functions of the job typically acquired through one or more terms of co-op experience. * U.S. Person Status (no sponsorship offered) * Ability to work 40 hours per week. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission Drug Tests Drug-Free Workplace In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.

Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission Drug Tests Drug-Free Workplace In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Employee Assistance Program eligibility / Health Advocate Paid vacation and paid holidays Job Description The Avery Dennison Identification Solutions group is looking for an Engineer to join the Manufacturing Engineering team at our site in Miamisburg, Ohio. As a Manufacturing Engineer, you will have the opportunity to lead and execute cost savings projects that are directly tied to key strategic goals for the business. Roles and Responsibilities As an Manufacturing Engineer, you will have the opportunity to make an impact by: Promoting safety as the most important value in the organization by contributing through training, process improvement and other environmental, health, and safety responsibilities Documenting standard processes and procedures for implementation and training Developing and implementing production/processing methods and controls to meet quality standards in the most cost efficient manner. Providing support to manufacturing to resolve production and quality issues that arise on a day-to-day basis Working with machine repair team members to analyze root cause and define corrective actions for future preventive maintenance Conducting technical inspections of complex machines Recommending and implementing improvements and/or modifications in sequence of operations, equipment utilization, and related matters Evaluating and approving design changes, specifications and drawing releases Partnering with the Manufacturing Engineering Manager to develop and execute projects that are a part of the Identifications Enterprise Lean Sigma journey Managing special projects; which could include supplier relationships, production performance management, sustainability, and other ad hoc projects Setting project schedules by monitoring project progress, coordinating activities, and solving problems Defining requirements for new equipment validation run-off Preparing new machines and production equipment for operation Optimizing direct and indirect manufacturing labor and in-plant material flow through the use of industrial engineering methods including line balancing, time studies, as well as both in-plant and external material flow Designing and planning equipment layouts Qualifications To set you up for success in this role, Avery Dennison requires the following qualifications: Bachelor's Degree in related field (Engineering, Mechanical/Industrial) or 2-4 years of experience in an engineering function in a manufacturing environment Knowledgeable in Electronic Systems (wire diagrams, schematics, PLC logic .. ect.) Knowledgeable in Mechanical Systems (Cams, Torque requirements, ect.) Excellent math and analytical skills Excellent communication and organization skills with an emphasis on detail Understanding of process documentation and improvement Proficiency with applicable computer systems, such as Microsoft Office and Google Apps (mail, docs, sheets, slides, forms) Additional qualifications that could help you succeed in this role are as follows: Working experience in Oracle E-Business Suite R12 Proficient creating 3D models and 2D prints using Solidworks or related CAD software. Proficient in AutoCAD 2D for facility layout planning High-energy, self-directed, self-starter Ability to execute multiple projects with minimal supervision Ability to work comfortably in a dynamic, fast-paced, and matrixed organization Ability to communicate effectively with cross-functional groups to define and execute overall requirements Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or [email protected] to discuss reasonable accommodations.

The Avery Dennison Identification Solutions group is looking for an Engineer to join the Manufacturing Engineering team at our site in Miamisburg, Ohio. As a Manufacturing Engineer, you will have the opportunity to lead and execute cost savings projects that are directly tied to key strategic goals for the business. Roles and Responsibilities As an Manufacturing Engineer, you will have the opportunity to make an impact by: * Promoting safety as the most important value in the organization by contributing through training, process improvement and other environmental, health, and safety responsibilities * Documenting standard processes and procedures for implementation and training * Developing and implementing production/processing methods and controls to meet quality standards in the most cost efficient manner. * Providing support to manufacturing to resolve production and quality issues that arise on a day-to-day basis * Working with machine repair team members to analyze root cause and define corrective actions for future preventive maintenance * Conducting technical inspections of complex machines * Recommending and implementing improvements and/or modifications in sequence of operations, equipment utilization, and related matters * Evaluating and approving design changes, specifications and drawing releases * Partnering with the Manufacturing Engineering Manager to develop and execute projects that are a part of the Identifications Enterprise Lean Sigma journey * Managing special projects; which could include supplier relationships, production performance management, sustainability, and other ad hoc projects * Setting project schedules by monitoring project progress, coordinating activities, and solving problems * Defining requirements for new equipment validation run-off * Preparing new machines and production equipment for operation * Optimizing direct and indirect manufacturing labor and in-plant material flow through the use of industrial engineering methods including line balancing, time studies, as well as both in-plant and external material flow * Designing and planning equipment layouts To set you up for success in this role, Avery Dennison requires the following qualifications: * Bachelor's Degree in related field (Engineering, Mechanical/Industrial) or 2-4 years of experience in an engineering function in a manufacturing environment * Knowledgeable in Electronic Systems (wire diagrams, schematics, PLC logic .. ect.) * Knowledgeable in Mechanical Systems (Cams, Torque requirements, ect.) * Excellent math and analytical skills * Excellent communication and organization skills with an emphasis on detail * Understanding of process documentation and improvement * Proficiency with applicable computer systems, such as Microsoft Office and Google Apps (mail, docs, sheets, slides, forms) Additional qualifications that could help you succeed in this role are as follows: * Working experience in Oracle E-Business Suite R12 * Proficient creating 3D models and 2D prints using Solidworks or related CAD software. * Proficient in AutoCAD 2D for facility layout planning * High-energy, self-directed, self-starter * Ability to execute multiple projects with minimal supervision * Ability to work comfortably in a dynamic, fast-paced, and matrixed organization * Ability to communicate effectively with cross-functional groups to define and execute overall requirements All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

Org Marketing Statement At Parker Aerospace, we develop technologies and innovative solutions that enable reliable, efficient and increasingly sustainable flight for the lifecycle of the aircraft, including aftermarket support. Our passionate people with deep engineering expertise, together with our breadth of differentiated technologies, ensure that we make the extraordinary happen and continue to shape the future of aviation in partnership with our customers. As a member of our team, you are instrumental in fulfilling our mission: 'Enabling Engineering Breakthroughs that Lead to a Better Tomorrow.' Pursuing a career at Parker presents unlimited opportunities for both professional and personal development. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges. At Parker, our team members belong, matter and make a difference. Position Summary Under limited/minimal supervision, the Manufacturing Engineer II is an experienced role that is responsible for designing, implementing, and reviewing manufacturing processes, procedures, and equipment typically in a single manufacturing facility. Supports the manufacture and assembly of new and existing Parker products. Identifies improved manufacturing techniques for testing new systems and methods for efficiency, and planning assembly layouts to optimize production, quality, cost, and safety. May be responsible for developing and deploying capital projects. Scope/ Supervision and Interaction This position does not have supervisory responsibilities for direct or indirect reports. Essential Functions * Manufacturing Process Flow - Plans and designs basic manufacturing processes to improve the manufacture and assembly of new and existing products. Determines equipment and tooling needed to achieve manufacturing goals according to product and quality specifications. * Process Improvement - Develops and implements process improvement projects that focus on manufacturing efficiency, material yield, safety, and cost. May lead small teams in developing and implementing process improvement efforts. * Engineering Design Support - Provides guidance to engineering leadership regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. * Regulatory Compliance - Ensures more complex processes and procedures comply with regulations. Applies frequent use and application of technical standards, principles, theories, concepts and techniques. * Remediation - Investigates and suggests corrective action to ensure product quality, and to resolve quality issues. * Performs additional responsibilities as assigned Qualifications * Bachelor's Degree in related Engineering field with 2-5 years of experience * Proficient/Working knowledge and ability to apply concepts of engineering for one solution line * Ability to apply a systematic, disciplined, and analytical approach to problem solving of moderate to difficult scope and complexity * Effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT) * Proficient/Working knowledge of data structures and database programming * Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems, in addition to standard business application software and/ or specialized data analysis tools * Ability to use existing procedures to solve problems * Ability to read and understand moderate to complex engineering drawings and specifications * Working knowledge of geometric dimensioning and tolerancing (GD&T) * Ability to research and analyze data effectively and draw valid conclusions * Strong verbal and written communication skills * Well-organized, detail-oriented, and ability to multi-task * Strong computer skills, including proficiency with Microsoft Word, Excel, PowerPoint, Access, Outlook, and web-browsers Come join the Parker Aerospace Team! We are proud to offer competitive benefits designed with health, wealth and well-being in mind. Our competitive package includes: Health and Wellbeing Our benefits start on day 1 of employment! * We offer comprehensive medical, dental, and vision coverage from day one, including Health Savings and Reimbursement Accounts. * Wellness incentive credits leading to reduced healthcare premiums. * Access to Employee Assistance Program (EAP) for health and well-being support. * Access to multiple dental plan options and vision coverage. * Flexible Spending Accounts for both Childcare and Healthcare expenses as well as optional Supplemental Medical Benefits. * Company provided Life Insurance, Accidental Life & Dismemberment Insurance, Short Term and Long-Term Disability insurance. * Additional supplemental benefits include legal protection plan, pet insurance coverage options, and identity-theft protection. Financial Security and Growth * Competitive salary with an annual bonus incentive plan. * Retirement benefits: 401(k) with a 5% matching contribution with immediate vesting in addition to a 3% Retirement Income Account match per year (3 year vesting period). * Complimentary financial planning services available through EY Work-Life Balance and Flexibility * Generous paid time off plus up to 13 paid holidays including a company-wide shut down between Christmas and New Year's. * We believe in the importance of work-life integration and support an optional 9/80 Alternative Work Schedule (AWS). * Parental Leave: 4 weeks at 100% pay for new family additions. * Extras like Adoption Assistance, financial guidance resources, paid jury duty, bereavement time, and time off for marriage and birth. Career Advancement and Education * Career development opportunities with up to $10,000 tuition reimbursement per year through our Education Reimbursement program. Parker Purpose Opportunities (Social Responsibility) * Business Resource Groups promoting diversity, equity and inclusion. * Volunteering day off and social committee activities throughout the year. Additional Benefits * Employee Perks on various services (car purchases, computer purchases, life adventures, etc.) * Employee Referral program - Refer a family member or friend and receive a generous award for referrals that are hired * Dress for Your Day policy, offering flexible work attire options. Drug-Free Workplace In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment. Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. U.S. Citizenship is required for most positions. Minority/Female/Disability/Veteran/VEVRAA Federal Contractor If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to *************************************************************** and ************************************************************** (06/20/2006) (C/O July 2015). This position is subject to meeting U.S. export compliance and/or U.S Government contracting citizenship eligibility requirements. Additional Comments The essential functions have been provided as example of the type of work performed by employees assigned to this job classification. The company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions. The job description is not intended to be an inclusive list of duties and responsibilities. It is intended to describe the general nature of the position. Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. Legal authorization to work in the U.S. is required for all positions, and certain positions may require specific types of legal work authorizations. Minority/Female/Disability/Veteran/VEVRAA Federal Contractor. If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to *************************************************************** or ************************************************************** Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

Reporting to the Business Unit Manager, at our Archbold, OH facility, local producers of La Choy, Vienna Sausage, Dennison's and Wolf Chili, you will be a technical expert taking process ownership over the line structure. You will oversee the data and ensure that the line is achieving its goals using Conagra's improvement systems, including Centerlines, CIL, Daily Direction Setting, and Changeover. Position Responsibilities Own Daily Management Systems (DMS) for Business Unit, including the creation and implementation of standards Leverage technical knowledge of equipment functionality to improve reliability of mechanical, pneumatic, electrical, and hydraulic systems Develop employee capabilities of systems, standards, and technical understanding Foster a culture of technological transformation through the use and improvement of digital tools Analyze data across Key Performance Indicators (KPIs) to identify and prioritize improvement initiatives Lead small groups in problem solving activities using structured methodologies Manage small projects independently using appropriate tools within the Conagra Performance System (CPS) Collaborate with multiple stakeholders (Operations, Finance, Engineering, Supply Chain, Maintenance, etc.) Lead capital project initiatives for Business Unit Responsible for providing direct oversight, administering discipline, and ensuring consistent application of policies and procedures across their respective teams. Position Qualifications Bachelor's degree in Engineering 1+ years of experience Experience with continuous improvement tools and statistical tools Technical knowledge and understanding of manufacturing systems and equipment Exposure to SAP or Power BI system Problem-solving skills and can define problems, collect data, establish facts, and make conclusions. #LI-Onsite #LI-EB1 #LI-Associates Compensation: Pay Range:$63,000-$93,000 The annual salary listed above is the expected offering for this position. An employee's actual annual salary will be based on but not limited to: location, relevant experience/level and skillset, while balancing internal Conagra employees' equity. Conagra Brands will comply with applicable law regarding minimum salaries for exempt employees. Our Benefits: We care about your total well-being and will support you with the following, subject to your location and role: Health: Comprehensive healthcare plans, wellness incentive program, mental wellbeing support and fitness reimbursement Wealth: Great pay, bonus incentive opportunity, matching 401(k) and stock purchase plan Growth: Career development opportunities, employee resource groups, on-demand learning and tuition reimbursement Balance: Paid-time off, parental leave, flexible work-schedules (subject to your location and role) and volunteer opportunities Our Company: At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions - within our people and our iconic brands like Birds Eye , Slim Jim and Reddi-Wip . Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome. Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.

**Requisition ID:** 69491 Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including _Whirlpool_ , _KitchenAid_ , _JennAir, Maytag_ , _Amana,_ _Brastemp_ , _Consul_ , and _InSinkErator_ . In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com . **The team you will be a part of** The Engineering team discovers, develops and evaluates new product ideas, enhancements, or strategic product extensions, and translates research discoveries into usable and marketable products. Leads, plans and tracks all phases of the product life cycle, from inception to introduction into the marketplace. Coordinates with various functions to ensure successful product development and implementation. **This role in summary** Whirlpool is looking for an experienced Mechanical Engineer/Project Manager with a strong background in project management to support our manufacturing operations. As part of the Clyde Manufacturing Engineering Team., The successful candidate will work closely with NAR and support Clyde and Fall River manufacturing locations, E&T, Advanced Manufacturing and our new product organization to define, coordinate and manage the acquisition of the necessary capital equipment to successfully manufacture and deliver winning new products to the marketplace. This will cover coveted brands such as Whirlpool, Amana, Estate, KitchenAid, and Maytag. The successful candidate will be at the forefront of developing new laundry products by providing manufacturing early design consultation services, while determining the anticipated impact to the existing manufacturing footprint, including establishing the early capital budget estimates. The role will also be accountable to achieving the P4G and RTB goals established annually. **Your responsibilities will include** + Accountable to acquire and manage the associated capital equipment for new products from conception through to formal production handoff at the selected manufacturing location of choice. + Accountable for supporting new product integration by providing manufacturing expertise to each of the key functions. + Work closely with primary NAR Clyde, and Fall River manufacturing location to define capital purchases. + Specify through implementation and handoff of new equipment to manufacturing operations. + Improve speed in which we deliver winning products to the marketplace. + Ensure that new manufacturing processes are flexible in design to accommodate long range new product cadence plans with the intent of minimizing future capital requirements. + Work closely with the Advanced Manufacturing Group to ensure that new processes are in compliance with the established Global Bill of Processes. + Lead projects and special assignments as required. + Support WCM methodologies with the Integration of new equipment/process + Support manufacturing by ensuring proper design for cost and maintainability + Assume various Project Management roles on projects as assigned or required **Minimum requirements** + Bachelor's Degree in an engineering discipline + 5+ years of manufacturing engineering experience + Experience in project management **Preferred skills and experiences** + Experience in acquiring and installing assets associated with mega projects + In-depth knowledge of laundry appliance fabrication, tooling and related manufacturing processes such as complex fabrication lines/cells that contain forming, piercing, bending, welding, robotics, etc. + Experience in analytical and problem-solving + Operations process development and implementation experience + Understanding of Lean Manufacturing concepts + Interpersonal and team-building skills, with the ability to work in a team environment + Project management skills + Ability to translate component GD&T (Geometry Dimensioning and Tolerancing) into equipment designs so that critical interfaces are assured + Demonstrated history of gathering input from key stakeholders and gaining their buy-in + Demonstrated success in translating technical concepts to commonly used business language + Support manufacturing by ensuring proper design for cost and maintainability + Experience working in a heavily automated production environment is desired **Additional information** Whirlpool's Ways of Working Our goal is to provide an environment that helps you bring your best to Whirlpool every day. While employees in this role work in-person Monday through Friday. We offer flexibility and industry-leading time-off benefits that will help you balance what's important at work and at home, including: + Always On Flexibility - You will have the autonomy to manage personal, family, and outside-of-work commitments as needed. + Sabbatical - Four weeks paid leave after every five years of service. \#LI-NL1 Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers (********************************* . Additional information about the company can be found on Facebook (*************************************** , Twitter (********************************* , LinkedIn (************************************************************ , Instagram (**************************************** and YouTube (************************************************* . Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Corporation Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. The team you will be a part of The Engineering team discovers, develops and evaluates new product ideas, enhancements, or strategic product extensions, and translates research discoveries into usable and marketable products. Leads, plans and tracks all phases of the product life cycle, from inception to introduction into the marketplace. Coordinates with various functions to ensure successful product development and implementation. This role in summary Whirlpool is looking for an experienced Mechanical Engineer/Project Manager with a strong background in project management to support our manufacturing operations. As part of the Clyde Manufacturing Engineering Team., The successful candidate will work closely with NAR and support Clyde and Fall River manufacturing locations, E&T, Advanced Manufacturing and our new product organization to define, coordinate and manage the acquisition of the necessary capital equipment to successfully manufacture and deliver winning new products to the marketplace. This will cover coveted brands such as Whirlpool, Amana, Estate, KitchenAid, and Maytag. The successful candidate will be at the forefront of developing new laundry products by providing manufacturing early design consultation services, while determining the anticipated impact to the existing manufacturing footprint, including establishing the early capital budget estimates. The role will also be accountable to achieving the P4G and RTB goals established annually. Your responsibilities will include * Accountable to acquire and manage the associated capital equipment for new products from conception through to formal production handoff at the selected manufacturing location of choice. * Accountable for supporting new product integration by providing manufacturing expertise to each of the key functions. * Work closely with primary NAR Clyde, and Fall River manufacturing location to define capital purchases. * Specify through implementation and handoff of new equipment to manufacturing operations. * Improve speed in which we deliver winning products to the marketplace. * Ensure that new manufacturing processes are flexible in design to accommodate long range new product cadence plans with the intent of minimizing future capital requirements. * Work closely with the Advanced Manufacturing Group to ensure that new processes are in compliance with the established Global Bill of Processes. * Lead projects and special assignments as required. * Support WCM methodologies with the Integration of new equipment/process * Support manufacturing by ensuring proper design for cost and maintainability * Assume various Project Management roles on projects as assigned or required Minimum requirements * Bachelor's Degree in an engineering discipline * 5+ years of manufacturing engineering experience * Experience in project management Preferred skills and experiences * Experience in acquiring and installing assets associated with mega projects * In-depth knowledge of laundry appliance fabrication, tooling and related manufacturing processes such as complex fabrication lines/cells that contain forming, piercing, bending, welding, robotics, etc. * Experience in analytical and problem-solving * Operations process development and implementation experience * Understanding of Lean Manufacturing concepts * Interpersonal and team-building skills, with the ability to work in a team environment * Project management skills * Ability to translate component GD&T (Geometry Dimensioning and Tolerancing) into equipment designs so that critical interfaces are assured * Demonstrated history of gathering input from key stakeholders and gaining their buy-in * Demonstrated success in translating technical concepts to commonly used business language * Support manufacturing by ensuring proper design for cost and maintainability * Experience working in a heavily automated production environment is desired Additional information Whirlpool's Ways of Working Our goal is to provide an environment that helps you bring your best to Whirlpool every day. While employees in this role work in-person Monday through Friday. We offer flexibility and industry-leading time-off benefits that will help you balance what's important at work and at home, including: * Always On Flexibility - You will have the autonomy to manage personal, family, and outside-of-work commitments as needed. * Sabbatical - Four weeks paid leave after every five years of service. #LI-NL1 Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Reporting to the Principal Engineer, you will provide leadership and direction for the successful execution of capital projects at one or multiple facilities. You will manage projects that align with business strategies, follow structured guidelines, and deliver the highest value asset allocation possible. You will grow and develop engineering capital project management competencies while leading project teams to deliver results. Your Impact * You will lead single or multiple projects simultaneously, depending on size, location, and complexity. * You will communicate and coordinate with stakeholders across Operations, Finance, EHS, and RQI. * You will interact externally with equipment vendors, construction contractors, engineering service providers, government agencies, and co-manufacturers. * You will manage small design teams of 6-8 engineering professionals (internal and consulting engineers). * You will oversee projects ranging from $100K to $2MM or larger, ensuring alignment with structured engineering workflow processes. * You will ensure accurate planning, deliverables, reporting, and spending forecasts while meeting cost, schedule, and performance criteria. * You will independently manage projects from development through completion and engage stakeholders to deliver business value. Position Qualifications * BS in an Engineering discipline or equivalent relevant experience. * 2+ years of project management experience leading projects from start to finish. * Technical knowledge of manufacturing systems and equipment. * Experience in project management within a manufacturing environment required; food processing or pharmaceutical experience considered. * Demonstrated leadership, organizational, and communication skills. #LI-Onsite #LI-EB1 #LI-Associate Compensation: Pay Range:$63,000-$93,000 The annual salary listed above is the expected offering for this position. An employee's actual annual salary will be based on but not limited to: location, relevant experience/level and skillset, while balancing internal Conagra employees' equity. Conagra Brands will comply with applicable law regarding minimum salaries for exempt employees. Our Benefits: We care about your total well-being and will support you with the following, subject to your location and role: * Health: Comprehensive healthcare plans, wellness incentive program, mental wellbeing support and fitness reimbursement * Wealth: Great pay, bonus incentive opportunity, matching 401(k) and stock purchase plan * Growth: Career development opportunities, employee resource groups, on-demand learning and tuition reimbursement * Balance: Paid-time off, parental leave, flexible work-schedules (subject to your location and role) and volunteer opportunities Our Company: At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions - within our people and our iconic brands like Birds Eye , Slim Jim and Reddi-Wip. Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome. Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************* . Job Description As a Process Engineer, you will be responsible for reducing product and process variation through the use of Six Sigma / statistical tools and the implementation or improvement of existing procedures and process controls. In this critical role, you will also be responsible for: Support day to day product and process operations for coating and compounding assets in a 24/7 manufacturing environment. Be a business partner to the site leadership team Identify & analyze production problems using Six Sigma methodologies to control & improve manufacturing processes. Loss reduction & continuous improvement in coating line productivity & product quality through the use of problem solving, Six Sigma & project management skills. Continually improve & optimize current products through variation reduction. Provide support for new product development and material changes as they arise by interacting with and being a member of Marketing and R&D teams. Develop control strategies for sustaining all continuous improvement projects. Initiate, manage & participate in safety, quality, cost & process improvement projects. Provide ongoing process evaluation-including trials & capability studies. Implementation of new equipment & operating procedures. Mentoring other process engineers and operations personnel. Developing and implementing technical training. Scoping and executing capital projects Participating, leading and sponsoring various task teams. Assisting in the development of long-term strategies. Qualifications Essential: Experience with statistical analysis, statistical process controls, SPC, DOE, FMEA, and MSE. Ability to develop, implement, monitor, measure, and control functional improvement plans. Problem solving, decision analysis, situation appraisal skills. Strong project management skills and ability to manage multiple concurrent priorities. Preferred: Experience with Controls, instrumentation, PLC knowledge also a plus. Experience in a 24/7 environment is preferred. Knowledge in PSM processes is a plus. Previous experience with PSA / web based processes. Web handling experience. Education: BS Degree in mechanical or chemical engineering from an accredited college or university, or Associates in mechanical or chemical engineering technology with 7+ years of industry experience is required. Excellent verbal and written communication skills including the ability to communicate and develop influential relationships at multiple levels within an organization, and lead in a positive and collaborative manner Ability to influence others. Approachable, effective in giving/receiving feedback. Strong presentation and facilitation skills. Strong PC skills - MS Office / Google platforms, Lotus Notes, MINITAB, AutoCAD, Inventor/SolidWorks, QSI and QIS experience a plus. Previous ISO 9001-2000 experience with implementation, improvement, and sustainment. Previous Six Sigma exposure/experience. Green Belt / Black Belt certification is a plus. Minimum of 2 years of experience in operations, engineering, or a related field, including co-op and internship experience. Flexibility on work hours (on call after hours/weekend as needed) Additional Information The salary range for this position is $91,350 - $125,300/ year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or [email protected] to discuss reasonable accommodations.

At Parker Aerospace, we develop technologies and innovative solutions that enable reliable, efficient and increasingly sustainable flight for the lifecycle of the aircraft, including aftermarket support. Our passionate people with deep engineering expertise, together with our breadth of differentiated technologies, ensure that we make the extraordinary happen and continue to shape the future of aviation in partnership with our customers. As a member of our team, you are instrumental in fulfilling our mission: 'Enabling Engineering Breakthroughs that Lead to a Better Tomorrow.' Pursuing a career at Parker presents unlimited opportunities for both professional and personal development. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges. At Parker, our team members belong, matter and make a difference The vision of Gas Turbine Fuel Systems Division is to be the global leader in the design, development, manufacture, and service of engine fuel, lubrication, and thermal management systems and components for aerospace/defense and industrial applications. By leveraging our expertise in analysis, atomization, combustion, fluid metering, and control - coupled with enterprise excellence - we will exceed customer expectations and achieve our business objectives. SUMMARY As part of overall duties to provide failure analysis will evaluate a variety of technical and cost factors for products, materials, and manufacturing processes of diverse/difficult scope and complexity and recommends engineering and manufacturing actions to attain design objectives. Coordinates or conducts research and analysis of materials and processes on assigned products or programs. RESPONSIBILITIES * Materials and Processes research and development of new configuration, new product and development or introduction for thermal management and gas turbine fuel systems including manifolds, valves and fuel nozzles utilizing state of the art materials and joining processes. * Subject matter expertise in heat treatment, vacuum and induction brazing, GTAW, EB and Laser welding, forgings, castings, coatings and chemical processing methods. * Support materials issues, metallographic preparation and evaluation, SEM/EDS, materials failure investigation and analysis, fatigue, stress, fracture mechanism, fractorgraphy corrosion analysis, knowledge with ability to provide support to other engineering disciplines as well as management and customers. * Thorough understanding of all metallurgical aspects of Iron-base alloys, Stainless steels, Ni, Co, Ti Al and composite materials. * Knowledge and acumen within raw material processing of metallics, ceramics and composites, additive manufacturing of materials including stainless steels Aluminum, Ni-base superalloys and non-metallics. * Interface with customers offering guidance and manufacturability on materials and process as it relates to customer systems or interface condition and environments. * Support production operation with improving process yields and reducing scrap through lab and 6-sigma driven investigations. * Write comprehensive, detailed and concise reports that include preparation and delivery in MS Office applications and deliver through stand up or vitual presentations. * Possess familiarity with AS9100, Nadcap and FAA regulations with ability to make improvements to quality management processes. QUALIFICATIONS * BS, MS or PHD in materials science, metallurgical engineering or related discipline with process engineering knowledge required. * Six (6) or more years of related experience required, including 3-5 years of experience in failure analyses, equipment and techniques i.e. SEM, EDS, BSE, ESED and other advance metallographic techniques used in aerospace field. * Demonstrated field experience in non-ferrous metallurgy including nickel base, cobalt base, titanium, aluminum and other corrosion and oxidation resistant alloys. * Experience working through problem solving teams within an engineering and quality driven organization with diverse technical backgrounds. * Adaptive and resilient to daily changes in work scheduling to meet internal customer demands with strong written and presentation skills. Benefit & Retirement Plans * Parker offers competitive benefit programs, including: * Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. * 401(k) Plan with company matching contributions at 100% of the first 5% of pay * Company provided defined-contribution retirement plan with annual contribution equal to 3% of pay * Career development and tuition reimbursement * Other benefits including paid parental leave, short and long-term disability programs, adoption assistance, a Care.com membership and financial planning assistance are provided at no cost to you. * Supplemental benefit programs including identity protection, legal protection, and pet wellness are available at competitive rates. * Paid Time Off and 13 Company-Paid Holidays. Drug-Free Workplace * In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment. * This position is subject to meeting U.S. export compliance and/or U.S Government contracting citizenship eligibility requirements. Conditions of Employment This position is subject to meeting U.S. export compliance and/or U.S. Government contracting citizenship eligibility requirements. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

Illinois Tool Works (ITW) is a Fortune 200 diversified manufacturing company with seven decentralized business segments, which include the Food Equipment Group. The Warewash and Waste Division of ITW's Food Equipment Group, is seeking a plant Quality Engineer to lead efforts to uphold and enhance product quality, recommend and implement corrective actions, and drive performance improvements across the manufacturing process for Hobart brand commercial dishwashers. This position will be working in-office from a single shift manufacturing site located in Troy, OH, about 20 minutes north of Dayton. The Warewash and Waste Division produces Hobart, Stero, and Somat brand commercial dishwashers and waste equipment for use in hotels, casinos, restaurants, health care, cruise ships, schools and universities and retail. This position reports to the Plant Manager and plays a key role in driving quality excellence in the production of Plant 27's Flight Type Dishwashers. The role is responsible for executing test campaigns, supporting the manufacturing, assembly and testing of the dishwasher, and continuously improving quality programs, systems, procedures, and work instructions in alignment with quality standards and methodologies. This individual will lead efforts to resolve daily manufacturing challenges, troubleshoot/resolve product issues, perform root cause and corrective action activities and implement strategic projects. Key responsibilities include overseeing the Flight Type Dishwasher's final test, resolving issues in the test process, supervising direct reports, conducting internal and out-of-box audits, and supporting a culture of operational excellence to maintain world-class quality standards throughout the facility. Responsibilities (80% Core Essential Functions) * Responsible for executing final testing including troubleshooting and resolution * Lead on-site team during test execution, managing responsibilities, to ensure successful test execution * Support manufacturing with product test procedures, test equipment, and specific quality requirements for product functionality. * Support and develop part inspection plans, testing & reliability plans, and reporting for new products and modifications to existing products. Verify that reliability, safety, and quality are unaffected. * Support programs to identify, target, and analyze product failures to reduce warranty costs. * Conduct pilot/production audits of new products * Provide guidance in development and maintenance of quality systems including direct ownership in (UL, NSF) and warranty reduction. * Establishes an effective quality assurance program and communicates policies, procedures, and guidelines. Conducts periodic audits to ensure that procedures are appropriately set and are being followed. * Effectively prevents or resolves problems and implements corrective action within the plant as needed. * Assures that products and parts conform to specification requirements and establishes appropriate records to verify quality and track results. * Specifically support manufacturing through provisions of receiving, in-process, final inspection and test procedures and equipment. * Interface and coordinate with Marketing, Engineering, Service, Purchasing, and external customers and other functional groups for smooth implementation of quality plans, procedures, and requirements for quality assurance organization by resolving quality issues and sustaining customer satisfaction. * Ensure that procedures, drawings, and instructions are in place and being followed and evidenced by a regular audit program of the quality system. * Effectiveness of problem solving or corrective action efforts within the plant; measured by timeliness, product integrity and overall implementation cost. * Keep appropriate records verifying the quality of products produced and shipped. Establishing products and parts conforms to requirements. Physical Requirements / Working Conditions * Office and Manufacturing environments. * PPE required: Steel/composite toed shoes, gloves, and eye protection when in manufacturing setting. * While performing the duties of this job, regularly required to stand, bend, or stoop and use hands, arms and walk frequently. May occasionally lift and/or move up to 50 pounds. Qualifications: * Bachelor's degree in mechanical or electrical engineering, quality or related field preferred * 3+ years' experience in a Quality position in a production setting * 3+ years' supervisory experience * Demonstrated knowledge of electrical processes including troubleshooting preferred Skills / Abilities: * Hands-On Expertise in Part Inspection (Rec-Process-Final) * Experience using a CMM Arm like FARO or Romer * Detail oriented * Strong skills interpreting drawings/prints, especially electrical wiring diagrams * Experience using electrical test tools like multimeters and amperage clamps * Working knowledge of Microsoft Excel, Access, and SQL * Analyze and Interpret data to form conclusions and recommendations for decision making. * Exposure to PLCs and other automation technologies * Organizational skills-6S-KANBAN-JIT * Communication - verbal and written - must be able to prepare presentations. * Strong Interpersonal skills working with direct reports and cross-functional teams * Listening-problem solving skills * Systematically gather information, sort through complex issues, and make timely decisions Compensation Information: 85,000 - 95,000 ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

**Job ID:** 11849 **Alternate Locations:** **Newell Brands** is a leading consumer products company with a portfolio of iconic brands like Graco , Coleman , Oster , Rubbermaid , Sharpie and Yankee Candle - and 24,000 talented teammates around the world. Our culture is built on values in action: Integrity, Teamwork, Passion for Winning, Ownership, and Leadership. We work together to win, grow, and make a real impact-supported by a high-performing, inclusive, and collaborative environment where you can be your best, every day. The Process Engineer is responsible for supporting and helping to establish new processes, process control and capability on all facets of existing and new manufacturing including training and support across all shifts. **Responsibilities** + Troubleshooting and improvement of machine operational equipment effectiveness issues + Evaluate improvement activities on the manufacturing floor directly related to equipment capabilities, equipment design, new technologies on the plant floor + Develops strategies and programs that improve the productivity and efficiency of the various work processes of the company + Applies various industrial engineering problem solving and productivity techniques to evaluate the improvement of recommended strategies and programs + Instructs others in continuous process improvements, including the use of various problem solving and productivity techniques such as process mapping and cost time management + Assist the corporate engineering group on new tool design + Participate and provide expertise on new production molds + Develop standardized process sheets and system for process control + Work with the quality team on SPC and DOE + Assist in the implementation of RJG on the production floor (training and cavity pressure monitoring) + Lead scrap reduction efforts across multiple product lines **Job Qualifications and Requirements** + Bachelor's degree in engineering from four-year College or University + Injection molding processing background required + Ability to reason, make decisions, and use independent judgment in various situations + Excellent written & verbal communication skills. Must be able to communicate effectively, both in oral and written form, among different levels of the organization, and have ability to communicate with employees who use English as a second language + Must be organized, a team player and be committed to quality systems + Must be able to handle multiple-projects at a time, self-motivated and pro-active + Must have knowledge of MS Office applications **Physical Demands** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to work some overtime as well as some irregular hours when needed. Occasional lifting of up to 50 pounds is required. This position is often required to stand throughout most of the workday and will also be required to use a computer throughout the day. Newell Brands (NASDAQ: NWL) is a leading global consumer goods company with a strong portfolio of well-known brands, including Rubbermaid, Sharpie, Graco, Coleman, Rubbermaid Commercial Products, Yankee Candle, Paper Mate, FoodSaver, Dymo, EXPO, Elmer's, Oster, NUK, Spontex and Campingaz. We are focused on delighting consumers by lighting up everyday moments. Newell Brands and its subsidiaries are Equal Opportunity Employers and comply with applicable employment laws. EOE/M/F/Vet/Disabled are encouraged to apply.

We are seeking innovators, collaborators, and problem solvers. Our co-ops do not shy away from a challenge and are looking for a chance to create a real impact with our company. Avery Dennison's Co-Op Program has a single business focus to cultivate future talent for our rapidly growing organization. With a concentrated blend of experiential on-the-job learning, a dynamic environment, access to business leaders, and a supportive team of co-workers, peers, and supervisors, the Internship Program will provide you the opportunity to sharpen your skills and collaborate on a number of strategic projects. We're seeking an RFID Applications Engineer Co-Op to join our business in North America during the Fall of 2026. You will be responsible for providing support for product engineers working on the development of RFID tags, printer systems, and RFID reader systems operating in the HF and UHF bands. You are expected to work in support of product development engineers. The work environment will be primarily an office or application lab. You will use various automated RFID test systems and RFID printer and reader systems. Work activities require an understanding of engineering disciplines and scientific processes sufficient to support testing, data collection, data organization, and reporting. Our co-op program serves as a talent pipeline for our Early Careers Program throughout the organization. What you will be doing * Working directly with engineers and influencing product development and customer use case decisions * Obtaining deep knowledge of RFID technology which can be a critical link for enabling the Internet of Things, Blockchain and Omni-Channel fulfillment * Working as part of a technical team environment, with professionals trained on testing methods, critical thinking, data analysis and reporting in spreadsheets, and generating technical and customer-facing reports What sets us apart Avery Dennison's Co-Op Program is unlike any other with its emphasis on networking, community and support. From Day 1, networking is encouraged, promoted and expected within the program. As you are on-boarded with other co-ops and Early Careers Program associates from various tracks, you quickly develop a community of individuals all committed to make sure you have what it takes to succeed. A core component of the curriculum is the peer mentoring program. Paired with an Early Careers Associate or program graduate within the organization, the program focuses on the transition from college to corporate, leveraging strengths and defining your early career path. In addition as an organization that values diversity and inclusion, we welcome our Co-Op associates to take an active role in our Employee Resource Groups(ERG's). ERG's are a group of employees that help advance and promote diversity, cultural awareness and an inclusive work environment. Some of our ERG's are Black Employee Resource Group (BERG), Elevate(Women's Leadership Development), NEO Chinese Association, Unite(LGBT+), Veteran Employee Resource Group (VERG) and Voz Latina. Internships and Co Ops at Avery Dennison are paid and relocation assistance is available to those that qualify. What you will need to bring to the program Avery Dennison has a long history of being an industry leader. Your history is important to us. It should include the following: Education * Pursuing a Bachelor's Degree in Engineering with a focus on Chemical, Mechanical, Industrial, and Electrical. Preferred Experience * Working knowledge of MS Word, Excel or Google Equivalent * General familiarity with electronic systems and introductory programming background is preferred * Experience via student organizations, such as Engineers without Borders, American Society of Mechanical Engineers, American Society of Chemical Engineers, Society of Women Engineers, National Society of Black Engineers, Society of Hispanic Professional Engineers, etc. * Volunteerism or similar activities Requirements: * Must be willing to join during at least two semesters, including one non-summer term * Must have reliable transportation to and from work * Sponsorship is not available now or in the future Travel * Ability to travel 10 - 20 percent of the time The hourly wage for this position is $24.50 - $27.00/hour based on where you are at academically. The hourly salary above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. Equal Opportunity Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************* or ********************************** to discuss reasonable accommodations.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio-frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** Job Description We are seeking innovators, collaborators, and problem solvers. Our co-ops do not shy away from a challenge and are looking for a chance to create a real impact with our company. Avery Dennison's Co-Op Program has a single business focus to cultivate future talent for our rapidly growing organization. With a concentrated blend of experiential on-the-job learning, a dynamic environment, access to business leaders, and a supportive team of co-workers, peers, and supervisors, the Internship Program will provide you the opportunity to sharpen your skills and collaborate on a number of strategic projects. We're seeking an RFID Applications Engineer Co-Op to join our business in North America during the Fall of 2026. You will be responsible for providing support for product engineers working on the development of RFID tags, printer systems, and RFID reader systems operating in the HF and UHF bands. You are expected to work in support of product development engineers. The work environment will be primarily an office or application lab. You will use various automated RFID test systems and RFID printer and reader systems. Work activities require an understanding of engineering disciplines and scientific processes sufficient to support testing, data collection, data organization, and reporting. Our co-op program serves as a talent pipeline for our Early Careers Program throughout the organization. What you will be doing Working directly with engineers and influencing product development and customer use case decisions Obtaining deep knowledge of RFID technology which can be a critical link for enabling the Internet of Things, Blockchain and Omni-Channel fulfillment Working as part of a technical team environment, with professionals trained on testing methods, critical thinking, data analysis and reporting in spreadsheets, and generating technical and customer-facing reports What sets us apart Avery Dennison's Co-Op Program is unlike any other with its emphasis on networking, community and support. From Day 1, networking is encouraged, promoted and expected within the program. As you are on-boarded with other co-ops and Early Careers Program associates from various tracks, you quickly develop a community of individuals all committed to make sure you have what it takes to succeed. A core component of the curriculum is the peer mentoring program. Paired with an Early Careers Associate or program graduate within the organization, the program focuses on the transition from college to corporate, leveraging strengths and defining your early career path. In addition as an organization that values diversity and inclusion, we welcome our Co-Op associates to take an active role in our Employee Resource Groups(ERG's). ERG's are a group of employees that help advance and promote diversity, cultural awareness and an inclusive work environment. Some of our ERG's are Black Employee Resource Group (BERG), Elevate(Women's Leadership Development), NEO Chinese Association, Unite(LGBT+), Veteran Employee Resource Group (VERG) and Voz Latina. Internships and Co Ops at Avery Dennison are paid and relocation assistance is available to those that qualify. Qualifications What you will need to bring to the program Avery Dennison has a long history of being an industry leader. Your history is important to us. It should include the following: Education Pursuing a Bachelor's Degree in Engineering with a focus on Chemical, Mechanical, Industrial, and Electrical. Preferred Experience Working knowledge of MS Word, Excel or Google Equivalent General familiarity with electronic systems and introductory programming background is preferred Experience via student organizations, such as Engineers without Borders, American Society of Mechanical Engineers, American Society of Chemical Engineers, Society of Women Engineers, National Society of Black Engineers, Society of Hispanic Professional Engineers, etc. Volunteerism or similar activities Requirements: Must be willing to join during at least two semesters, including one non-summer term *Must have reliable transportation to and from work *Sponsorship is not available now or in the future Travel Ability to travel 10 - 20 percent of the time Additional Information The hourly wage for this position is $24.50 - $27.00/hour based on where you are at academically. The hourly salary above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. Equal Opportunity Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************* or [email protected] to discuss reasonable accommodations.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio-frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** Job Description We are seeking innovators, collaborators, and problem solvers. Our co-ops do not shy away from a challenge and are looking for a chance to create a real impact with our company. Avery Dennison's Co-Op Program has a single business focus to cultivate future talent for our rapidly growing organization. With a concentrated blend of experiential on-the-job learning, a dynamic environment, access to business leaders, and a supportive team of co-workers, peers, and supervisors, the Internship Program will provide you the opportunity to sharpen your skills and collaborate on a number of strategic projects. We're seeking an RFID Applications Engineer Co-Op to join our business in North America during the Fall of 2026. You will be responsible for providing support for product engineers working on the development of RFID tags, printer systems, and RFID reader systems operating in the HF and UHF bands. You are expected to work in support of product development engineers. The work environment will be primarily an office or application lab. You will use various automated RFID test systems and RFID printer and reader systems. Work activities require an understanding of engineering disciplines and scientific processes sufficient to support testing, data collection, data organization, and reporting. Our co-op program serves as a talent pipeline for our Early Careers Program throughout the organization. What you will be doing + Working directly with engineers and influencing product development and customer use case decisions + Obtaining deep knowledge of RFID technology which can be a critical link for enabling the Internet of Things, Blockchain and Omni-Channel fulfillment + Working as part of a technical team environment, with professionals trained on testing methods, critical thinking, data analysis and reporting in spreadsheets, and generating technical and customer-facing reports What sets us apart Avery Dennison's Co-Op Program is unlike any other with its emphasis on networking, community and support. From Day 1, networking is encouraged, promoted and expected within the program. As you are on-boarded with other co-ops and Early Careers Program associates from various tracks, you quickly develop a community of individuals all committed to make sure you have what it takes to succeed. A core component of the curriculum is the peer mentoring program. Paired with an Early Careers Associate or program graduate within the organization, the program focuses on the transition from college to corporate, leveraging strengths and defining your early career path. In addition as an organization that values diversity and inclusion, we welcome our Co-Op associates to take an active role in our Employee Resource Groups(ERG's). ERG's are a group of employees that help advance and promote diversity, cultural awareness and an inclusive work environment. Some of our ERG's are Black Employee Resource Group (BERG), Elevate(Women's Leadership Development), NEO Chinese Association, Unite(LGBT+), Veteran Employee Resource Group (VERG) and Voz Latina. Internships and Co Ops at Avery Dennison are paid and relocation assistance is available to those that qualify. Qualifications What you will need to bring to the program Avery Dennison has a long history of being an industry leader. Your history is important to us. It should include the following: Education + Pursuing a Bachelor's Degree in Engineering with a focus on Chemical, Mechanical, Industrial, and Electrical. Preferred Experience + Working knowledge of MS Word, Excel or Google Equivalent + General familiarity with electronic systems and introductory programming background is preferred + Experience via student organizations, such as Engineers without Borders, American Society of Mechanical Engineers, American Society of Chemical Engineers, Society of Women Engineers, National Society of Black Engineers, Society of Hispanic Professional Engineers, etc. + Volunteerism or similar activities Requirements: + Must be willing to join during at least two semesters, including one non-summer term *Must have reliable transportation to and from work *Sponsorship is not available now or in the future Travel + Ability to travel 10 - 20 percent of the time Additional Information The hourly wage for this position is $24.50 - $27.00/hour based on where you are at academically. The hourly salary above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. Equal Opportunity Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************* or ********************************** to discuss reasonable accommodations. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled