Industrial electrician jobs in Carrollton, TX

Specific Duties and Responsibilities: Repair electrical and electronic equipment Analyze equipment malfunctions to determine cause and corrective action Access all areas of ride structures for inspections and maintenance Install adequate temporary and/or permanent power for events and festivals throughout the season Assist with various electrical needs for new construction and remodeling projects as assigned Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them Maintain positive interaction with other employees and guests Other tasks and duties as assigned Reporting Structure: Reports to the designated Electrical Foreman Skills and Qualifications: State Journeyman's license preferred Theme park ride experience a plus Must be experienced in maintaining and troubleshooting equipment using PLC, and relays Experience in installation, repair, and maintenance of electrical equipment Able to stand and walk for long periods of time outdoors in extreme heat/cold and sun Able to carry tools and lift at least 50lbs Must be comfortable working at heights over 50ft Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed Must possess a valid Driver's License with a good driving record Must be at least 18 years of age

Duties and Responsibilities is fully remote in that you must be able to travel 100% of the time to the job site. Must be fully qualified and capable of working directly with project management to understand and evaluate scheduled electrical work needed to complete projects in a timely manner. Must be capable of performing all duties associated with the crew lead position and in addition. Must be able to self-prepare for all scopes of electrical work needed by evaluating pictures from site assessment and communicating directly with the project management and design team about any necessary changes or improvements to the electrical plan set. These changes must be documented and sent to the project management team. Must maintain tools and materials needed to “adapt and overcome” any challenges in the field including utility shutdowns. Must be capable of communicating at a high level with city inspectors. Must maintain a 90% or higher pass rate on all electrical equipment wall installations and maintain less than 10% of service calls generated by installation-related quality issues. Must be capable of cross-training and crew development when assigned to supervise and support solar installation crews, allowing roof crew leads to self-perform installations while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process. Must be capable of supervising the crew while the electrical apprentice ( roof lead or other designated person by management) gets to experience electrical wall installation and service upgrades. Must have required personal tools of the trade, see “minimum required personal tools of the trade”. During the first 90 days you will be required to learn how to install Tesla Powerwall coupled with Enphase solar systems. We will be looking to you to run your own crew with a helper installing power walls and solar systems. By the end of the 90 days, you will be required to take a proficiency test. This test will include you installing a complete battery and solar system without the help of the lead electrician at Good Faith Energy. You must pass this test to be a lead electrician for Good Faith Energy. We will provide you with all the on-the-job training as well as classroom materials to advance your knowledge of the systems you will be installing. Attends all meetings and conference calls. Performs consistently with company core values Maintains strict confidentiality. Provides excellent customer service, for both internal and external customers. Follows all OSHA and other safety guidelines. Actively demonstrates teamwork at all times. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period. The duties described above are not inclusive. Additional duties may be permanently assigned or required from time to time due to the need to respond to customer needs and remain competitive in the marketplace. Minimum Knowledge, Skills, and Abilities Required Journeyman License (or be able to obtain the license) Pay will be based on license type Must be able to lift up to 75lbs. Must have a valid driver's license. Must be OSHA 10 certified. Must be qualified to operate company equipment (may include truck, trencher, man lift, forklift) and capable of operating any heavy equipment on the job. Proficient in the proper use of safety gear and training/supervising for working above 6' from the ground, roofs, ladders, etc. Must be CPR certified. Read all installation product manuals for devices installed. Communicate effectively through all work-related chat/email chains while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs competent break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to determine root cause of problem; dismantling devices to gain access to and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and repair items as necessary for equipment maintenance and repair. · With minimal instruction, performs maintenance as per industry standards. · Works with customer counterparts to execute maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, and applicable management systems. · Performs routine processes with and within industrial control systems to troubleshoots and analyzes complex equipment, perform equipment maintenance, and to resolve equipment problems. · Utilizes in-depth application of electrical, mechanical, and fluid power aptitude to troubleshoot and repair equipment. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Must be able to use basic hand tools and specialized tools as appropriate. · Possesses working knowledge and experience regarding electrical, mechanical, and fluid power systems in related fields. Can analyze the problems, synthesize alternative solutions, and perform repairs · Extensive travel required. (Local, National, International). Desirable KSAs: · Experience in preventative maintenance techniques, precision measuring, mechanical alignments, and general maintenance of applicable process equipment. · Exposure to programmable logic controllers, field devices, and electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

An Electrical Control Technician at Encore Wire will be primarily responsible for the safe rectification of machinery and equipment used in the various production plants and throughout the facility as directed by Supervision or Company dictated equipment priority. The Control Technician must be able to work on all facility wide electrical systems. A good understanding and experience of all mechanical and electrical disciplines is needed, these would include hydraulics and pneumatics. Essential Job Functions Experience and technical knowledge of the operation of AC and DC drives. A thorough understanding of speed feedback devices theory and operation. An understanding of temperature control and temperature components. A good understanding of PID and control loops. A good understanding of Ethernet communications and connections. Proficient in PLC and HMI systems, to include communications drivers and connections, PLC program navigation and controlled manipulation. A thorough understanding of all electrical components and electronic devices. Show an understanding and demonstrate the processes involved in diagnosing defective components, motors, drives and electronic components. Able to demonstrate the ability to use diagnostic equipment. Experience with selecting electrical components when original OEM components are not available. Other Skills/Abilities The candidate must be a Team player and be willing to share his knowledge freely. The candidate will be required to work with all team members undertaking any and all roles from leading a task to cleaning up after a task. A successful team member will have extremely good work ethic and a great punctuality and attendance record. Physical Requirements Requires repetitive movement Requires walking Requires kneeling, crouching and stooping Requires using hands to handle, control, or feel objects, tools or controls Requires lifting up to 50 pounds while bending, twisting and/or standing

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Construction Electrician 2 Years of Electrical Experience Required. Assist with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Rosendin policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. ESSENTIAL DUTIES AND RESPONSIBILITIES: Use industry related hand tools and power tools, under supervision. Assist the Inside Wireman with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Inside Wireman with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Inside Wireman to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Rosendin productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Rosendin's safety policies and procedures. SKILLS AND EXPERIENCE: The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. PHYSICAL DEMANDS AND WORK ENVIRONMENT: This section reflects the physical demands and work environment that most people working in this occupation engage in during the course of a workday. However, these occupations often can be performed by those with disabilities and appropriate adaptations. Physical Demands: The employee may require the ability to do the following: Perform ladder climbing, wire pulling and conduit pulling. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Lift 50 lbs. from ground and pull 50 lbs. of force Must have use of feet, legs, hands and arms to climb and/or balance on scaffolding or ladders Must have use of arms, hands and fingers to reach, handle and feel cable, wires, tools and other equipment Must be able to work off of ladders, man lifts, or reach booms without fear of heights. Must be able to see and hear, or have corrected vision, both close and distant, and hearing Must be able to distinguish color coded wires Must be able to adjust vision focus and use peripheral vision and depth perception. Working Environment: While performing duties of this job, the employee may be exposed to: A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Work is sometimes noisy, cramped, and dirty Hazards include risk of electrical shock and other work-site accidents 40-hour workweek is normal, however, if offered, working overtime may be included; electricians may work nights or weekends Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Emerson has an exciting opportunity at our Sherman, TX, location for a Weekend Shift Electrician (Friday, Saturday, Sunday, 6AM-6PM). In this role, you will play a key part in maintaining and troubleshooting electrical systems to support our operations. If you are safety-minded, dependable, and thrive in a team environment, we invite you to apply. In This Role, Your Responsibilities Will Be: Responsible for all electrical services at Emerson- Sherman. Fully plans and installs 120/240/480-volt electrical services which conform to city and NEC codes as required to ensure the safety of all employees and equipment. Responsible for other maintenance duties such as LAN installations, phone lines, plumbing repairs and the repair of electrical/mechanical devices including but not limited to: Production machines, Assembly test equipment, Equipment assigned to the building such as boilers, air compressors, and HVAC systems. Must work closely with Non-Product Buyer and factory technicians as required. Must follow all safety and quality policies and procedures. Other duties may be assigned at the discretion of the Supervisor or Manager. Who You Are: You are safety conscious and act with a clear sense of ownership. You align words and actions to model reliability. You follow through on commitments. You contribute to a work climate where differences are valued and supported. You build constructive relationships with people both similar and different to yourself. You understand the importance of meeting the needs of our customers. For This Role, You Will Need: High School Diploma or GED and two-year technical degree focused on the repair of electrical, mechanical, telecommunications or network installations. Must be able to provide proof of active journeyman's electrical license for Grayson County. Minimum of 2 years hands on experience and currently qualified to install 120/240/480 voltage in manufacturing facility. Knowledge in the following areas: HVAC systems; Telecommunications; Electrical Circuits; Mechanical Systems; Air Compressors & Hydraulics; PLC basics. Knowledge in OSHA regulations pertaining to electrical installations. Ability to interpret maintenance prints and electrical schematics. Must be able to obtain a mobile equipment license to operate all mobile equipment within 2 months. Preferred Qualifications That Set You Apart: Manufacturing experience Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Our Location: Sherman, TX, offers the charm of a small town with the conveniences of a city. Located in North Texas less than an hour from the Dallas-Fort Worth Metroplex, Sherman offers a diverse range of outdoor recreational activities, including boating, fishing, and hiking. Sherman's low cost of living, excellent schools, and close proximity to Lake Texoma make it an ideal place to call home!

Across the industrial design, manufacturing and maintenance worlds, we're the digital destination for product and service solutions to help our customers with the maintenance, repair and operation of their businesses. We provide global access to an unrivalled range of over 750,000 stocked industrial products. Each day our team of experts deliver solutions to resolve our customer's challenges across design, procurement, inventory and maintenance. We consistently strive to deliver the best possible service to all of our customers and challenge ourselves to provide a seamless procurement experience. We are one team. We deliver brilliantly. We do the right thing. We make every day better. These are our values. They unite our c.9,000 global colleagues and differentiate us from our competition. They are a mix of how we work today and how we must step up for the future. Most importantly, it is one set of values shaped by our people, for our people. Together, we can make great things happen. Aim for amazing and beyond. About the Role Role Purpose Maintenance Electrician is responsible for ensuring the safe, efficient, and uninterrupted functioning of a facility's electrical systems and equipment through a mix of preventative maintenance, routine inspections, and emergency repairs. This role requires a strong understanding of electrical codes, the ability to interpret technical diagrams, and excellent problem-solving skills. Key Responsibilities Inspection and Testing: Regularly inspect, test, and diagnose faults and malfunctions in electrical systems, components (e.g., transformers, circuit breakers, switches, and relays), and related electro-mechanical systems. Preventative Maintenance: Develop and perform routine preventative maintenance on facility machinery and equipment to identify and fix minor issues before they become major problems and ensure ongoing safety and efficiency. Repair and Troubleshooting: Respond to emergency breakdowns and troubleshoot complex electrical issues using various testing devices (e.g., volt-ohmmeters, ammeters). Repair or replace faulty wiring, equipment, or fixtures, such as motors, lighting systems, and control panels. Installation and Modification: Install, modify, and upgrade new and existing electrical systems and equipment, ensuring all work is in accordance with applicable local, state, and National Electrical Codes (NEC) and safety regulations (OSHA). Blueprint and Schematic Interpretation: Read, interpret, and analyze blueprints, schematics, and technical diagrams to determine wiring methods, plan installations, and ensure compliance with design specifications. Documentation and Record Keeping: Maintain accurate and detailed records of all maintenance, repairs, inspections, and materials used, often utilizing a Computerized Maintenance Management System (CMMS). Collaboration and Guidance: Work closely with other tradespeople, engineers, and contractors. May be required to guide or train maintenance workers or apprentices. Inventory Management: Assist in identifying and procuring necessary equipment and supplies, ensuring an adequate inventory of spare parts and components. Essential Skills & Experience Education: A high school diploma or equivalent is required, along with completion of a technical training program in electrical maintenance or an electrician's apprenticeship. License/Certification: A journeyman electrician license is typically required. A valid driver's license required. Experience: Several years of progressively responsible experience in the electrical trade, with a thorough working knowledge of electrical codes for installation and maintenance. Experience with PLCs (Programmable Logic Controllers), hydraulic, and pneumatic systems is often desirable in industrial settings. Technical Skills: Proficiency in using a wide range of electrical test equipment, hand tools, and power tools; strong knowledge of electrical theory, power distribution, and load calculations. Desirable Skills & Experience Strong problem-solving and critical thinking abilities. Excellent attention to detail and a commitment to safety protocols. Effective communication and teamwork skills. Physical strength and stamina to lift heavy equipment (up to 50 lbs frequently) and work in various conditions, including confined spaces or at heights. Color vision is essential for identifying electrical wires. Equal Employment Opportunity RS Americas is an equal opportunity employer and maintains policies and practices that are designed to prevent and prohibit unlawful discrimination against any qualified employee or applicant on the basis of race, color, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, military/veteran status, disability, genetic information, citizenship status, or any other unlawful classification to the extent protected by law. This policy of non-discrimination applies to all employment practices, including hiring, compensation, benefits, promotion, training and termination. Employees who engage in unlawful discrimination will be subject to disciplinary action, up to and including termination. #LI-CC1

Since 1980, Petri Electric has powered the Dallas-Ft. Worth metroplex from our headquarters in Richardson, Texas. As a top-tier full-service contracting firm, we specialize in commercial and industrial electrical construction and service, known for delivering projects on time and within budget. Join us and light up your career at Petri Electric! What's in It for You? Competitive Pay: $18.00 - $29.00 per hour (based on experience) Sign-On Bonus: Up to $500 for qualifying candidates Comprehensive Benefits: Medical, dental, and vision coverage, 401(k) with matching Paid Time Off: Paid holidays and PTO Growth Opportunities: Job training, promotion pathways, and continued education reimbursement Positive Environment: Team events and a leadership team that supports your growth Why You'll Love It Here At Petri Electric, we prioritize your growth and satisfaction. With a commitment to teamwork, respect, and a collaborative work environment, you'll get the support you need from day one. Whether you're new to the field or building on existing skills, we provide the guidance to help you become a pro. Your New Role As an Service Electrician Apprentice, you'll gain hands-on experience while learning directly from seasoned electricians. Daily tasks include: Assisting in installing electrical systems, including wiring, switches, and fixtures Learning to diagnose and repair electrical issues Prioritizing safety and quality in every project Using tools and equipment specific to the trade Reading and interpreting electrical schematics Installing conduits and wiring with precision Testing and troubleshooting systems for reliability Maintaining detailed records of all work performed Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Job requirements Valid Electrical Apprentice License (preferred) Reliable transportation to commute to job sites Willingness to undergo a background check Consent to drug testing as per company policy Authorized to work in the U.S. "Petri Electric is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status." #red All done! Your application has been successfully submitted! Other jobs

Job Description The Maintenance Electrician inspects, repairs, coordinates, installs, modifies and maintains electrical-systems and electrical and mechanical equipment to ensure continuous proper operation at the AAC facility during varying shift times, including nights, weekends and Holidays. This FULL TIME direct hire position is great for someone looking to move indoors and get away from the Texas heat or gain experience to work towards their masters electrician license. Comes with benefits such as medical, dental, vision, PTO, 401(k), etc. Essential Functions: Performs and documents preventive maintenance on all electrical systems, control systems, and vertical transportation control systems to ensure excellent working conditions and compliance to all applicable codes; Maintains all electrical circuitry and equipment in excellent working condition; including but not limited to stationary and moving equipment normally involved in the operation of a large multi-use facility; Assists other trade personnel in making various repairs in the arena; Performs operation of facility equipment and heavy machinery as required for facility operation; Provides emergency repairs to arena equipment during event operations to ensure the success of the event; Coordinates and supervises contractors and vendors performing electrical or electronic work in the facility; Utilizes CMSS system to include interpreting/prioritizing work orders, performing work requested and completing work orders per instruction; Programs and troubleshoots PLC based control systems; Maintains a working knowledge of Security (CCTV) and Fire systems; Maintains and performs working assignments on all voltage systems including 120/208, 277/480 and 5KV; Other duties as assigned. Education/Qualifications: College Degree in an electrical technology field preferred or High School Diploma/GED or graduated from a certified electrical apprenticeship program Bilingual English/Spanish is preferred 5 years minimum of commercial Journeyman experience Working knowledge of PLC is preferred Must have extensive knowledge of the NEC Must have advanced education in the maintenance repair and operation of electrical equipment, mechanical and production based equipment and control systems and typical public assembly of facility equipment Must possess a current State of Texas Journeyman Electrical License Knowledge of electrical safety Personifies our core values of INTEGRITY, TEAMWORK, PASSION, and EXCELLENCE at all times. Physical Demands/Work Environment Ability to reach with hands and arms use hands to handle, or feel, stand, climb or balance and stoop, kneel, crouch, or crawl, walk and sit; Ability to lift and/or move up to 50 pounds while twisting and/or turning working at heights, including Catwalk work, and frequent climbing of stairs and ladders Ability to work in small and confined spaces Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus Ability to work at heights and in extreme conditions Must be flexible in ability to work all hours/shifts in a 24/7 facility. Work hours are based on Events. Ability to respond during normal business hours, after hours and on weekends via cell phone is required/company phone allowance is provided. Employee selects service plan and is responsible for the repair and/or replacement of the phone Employees with this phone access requirement are not restricted in their movement, location, and activities during off hours when they are not at work The noise level in the work environment is usually moderate, however, during events, the noise level may be loud Position is required to work in exposed wet and/or humid conditions Position is required to work near moving mechanical parts, high, precarious places, fumes or airborne particles, toxic or caustic chemicals, outside weather conditions, extreme cold, extreme heat and risk of electrical shock Employees must be able to work on evenings, weekends and holidays as required.

Job DescriptionBenefits: Bonus based on performance Competitive salary Health insurance Paid time off Immediate Opening for a Journeyman Service Electrician Benefits & Compensation Above Market Compensation - $85,000 to $135,000 Paid On-The-Job Training 7 Paid Holidays Paid PTO Available in 1st Year Paid Day Off on your Birthday Paid Lunch Breaks Group Health Insurance Dental & Vision Insurance Retirement Plan Free Uniforms Take home a Company Vehicle (we pay the fuel, tolls, & maintenance) Company and Family Events We are seeking skilled Journeyman Electricians to join our team! You will be responsible for installing and repairing wiring, electrical fixtures and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in your work and want to be paid what you are worth we want to hear from you! Responsibilities: Assess the customers' request, determine solutions, provide pricing and perform the work Install new electrical systems and repair existing systems for residential and commercial customers Qualifications: TDLR Journeyman Electrician License Previous experience as an Service Electrician Service Titan Experience a plus Possess a clean driving record, pass a background check and be drug free Good verbal and written communication skills Professional appearance and courteous personality

Full-time Description We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock's dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation's most dependable microgrids - all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you'll do… We are seeking a skilled Electrical Technician, Automation & Controls to support the integration, commissioning, and optimization of generator packages and electrical systems within advanced microgrid projects. This role is hands-on and dynamic, requiring expertise in automation, controls, and system performance to help ensure reliable, safe, and compliant operations. This is a field position based out of Dallas - Fort Worth, Texas and will report directly to the Manager of Automation & Controls Engineering. You'll make an impact by: System Integration & Commissioning Contributing to the integration of generator packages, switchgear, and electrical systems in line with project specifications, safety protocols, and timelines. Carrying out and validate cable schedules, control packages, and system testing protocols. Performing start-up and performance testing activities to confirm operational readiness and safety compliance. Project Execution & Handover Supporting the transition from construction to commissioning and operations teams by confirming integration requirements are met. Tracking and closing punch list items by documenting deficiencies and assisting with resolution. Providing troubleshooting support during early operational phases following system integration. Technical Contribution Assisting in troubleshooting automation, protection, and control systems (e.g., Schneider PLCs, DeepSea Controllers, ABB Relays, SEL devices). Participating in the development and delivery of training for site personnel and contractors on microgrid operations, controls, and start-up procedures. Helping maintain documentation control and reporting, ensuring accurate project records. Collaboration & Reporting Communicating progress and technical findings with project management and integration teams. Using tracking tools to update key milestones, risks, and solutions. Contributing to identifying risks and ensuring compliance with SHE standards, company protocols, and regulatory requirements. Safely preparing, operating, and maintaining a motor vehicle for purposes of conducting company business You'll sweep us off our feet if you: Have strong analytical and have problem-solving abilities in automation and control systems. Are collaborative and effective working style with team members and contractors. Are proactive, self-motivated, and eager to take ownership of tasks. Are flexibile and able to adapt to shifting project requirements and deadlines. Have hands-on background in technical fields related to power generation, electrical construction, and commissioning. Are committed to safety, reliability, and operational excellence Requirements What you'll need: 3+ years of experience in the energy sector (or equivalent electrical experience), with emphasis on power generation, automation, and controls. Associate's degree (desired) in electrical, automation, or related technical discipline. Knowledge of microgrid operations, system integration, and applicable codes/standards. Hands-on experience with control and protection equipment such as: Schneider PLCs, DeepSea 8660 & 8610 Controllers (or equivalent), or ABB 615 Relay, SEL 700G, SEL 700GT, SEL RTAC Experience working across multiple stages of project execution. Physical ability to work in field environments, including adverse weather conditions, lifting up to 50 pounds, and performing physically demanding tasks. Your Rewards! Medical, Dental, Vision, and Prescription Drug Insurance Company-Paid Life Insurance Flexible Spending Account (FSA) Health Savings Account (HSA) Wellness Programs and Incentives 401(k) Retirement Plan & Company Match Paid Time Off - Sick & Vacation Time Paid Holidays Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education - to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values, specifically our value of “The Team”, which includes “Mutual Respect, Openness, and Honesty.”

Job Details Austin, TX $32.00 - $40.00 HourlyDescription Are you an experienced electrician who thrives on troubleshooting and solving challenges in the field? We're looking for a skilled Journeyman Service Electrician to join our growing team. This role is ideal for someone who takes pride in delivering quality work, enjoys working directly with customers, and has a wide range of electrical service experience. About the Role As a Service Electrician, you'll be responsible for installing, troubleshooting, and maintaining electrical systems across commercial and industrial projects. From wiring and lighting installations to diagnosing system issues and completing service calls, you'll play a key role in keeping our customers' operations running smoothly. This position comes with a company truck, fuel card, performance bonuses, and abundant overtime opportunities - especially in the summer months. Key Responsibilities Troubleshoot and repair electrical issues quickly and effectively. Install electrical safety and distribution components (e.g., disconnects, breaker panels, transformers). Perform raceway, wiring, lighting fixture, and control system installations. Maintain and service electrical infrastructure, including EMS and building systems. Complete and manage daily work orders while ensuring customer satisfaction. Follow all safety standards, electrical codes, and company guidelines. Qualifications What We're Looking For Licensed Journeyman Electrician (valid TDLR license required). Proven experience in commercial and/or industrial electrical systems. Ability to read and interpret electrical drawings, blueprints, and schematics. Strong knowledge of NEC, safety procedures, and applicable regulations. Excellent troubleshooting, critical thinking, and problem-solving skills. Physically fit with the flexibility to work long shifts and occasional overnights. Strong customer service and communication skills. What We Offer Company truck (take-home) with fuel card. Health, Dental, and Vision insurance. 401(k) retirement plan with company match. Performance bonuses. Paid time off. Overtime opportunities available immediately - with plenty of hours during the summer.

About Us: Tioga Plumbing & Electric is a family-owned and operated, fast-growing company serving both residential and commercial clients across the DFW metroplex. With a reputation for excellence, we specialize in plumbing and electrical services for new restaurant builds, as well as providing expert service to both commercial and residential customers. We are committed to providing top-quality customer service, and we're looking for a driven individual to join our team! Position Summary: We are seeking a skilled and safety-focused electrician with experience in residential, light industrial and commercial environments. Responsibilities include installing and troubleshooting electrical systems, wiring various voltages (120v, 240v, and low voltage), and working with EMT and rigid conduit. Candidates should be familiar with NEC codes, wire and conduit sizing. The ideal applicant demonstrates and maintains a professional attitude and possesses a current and valid driver's license with reliable transportation and current, valid Wireman or Journeyman license through TDLR. Applicant must have a clean driving record and the ability to pass a background check and drug test. Tools and Equipment: Applicants must have knowledge of and experience using industry-standard tools such as benders, threaders, knockout sets, multimeters, conduit reamers, torque wrenches, wire strippers, and hand and power tools required for installation and troubleshooting tasks. Compensation: Progressive Performance based hourly pay with unlimited earning potential Company vehicle is provided Duties and Responsibilities: Install, maintain, and repair electrical systems and components in industrial and commercial environments Measure, cut, bend, and run EMT and rigid conduit according to specifications and blueprints Wire and terminate systems at 120v, 240v, and low voltage Determine appropriate wire and conduit sizes based on load requirements and NEC codes Troubleshoot and resolve issues in electrical circuits and control systems Mentor and assist less experienced electricians to ensure quality workmanship and safety Maintain accurate records of work performed and materials used Ensure compliance with all safety protocols, job site procedures, and electrical codes Physical Requirements: Must be able to lift and carry up to 50 lbs. frequently and heavier loads with assistance Ability to stand, walk, bend, stoop, kneel, and crouch for extended periods of time Comfortable working on ladders, scaffolds, and in confined spaces Must have full range of motion to handle tools and materials Ability to work in various weather conditions and on active construction sites Must have good hand-eye coordination and manual dexterity What We Offer: Competitive hourly wage Opportunity for career growth in a rapidly expanding company Supportive and dynamic work environment Paid training and development opportunities Health, dental, and vision insurance Aflac Vacation Company sponsored events Note: This job description is not exhaustive and may be revised to reflect the evolving needs of the company. Management reserves the right to amend duties and responsibilities, as necessary.

Please read the following job description thoroughly to ensure you are the right fit for this role before applying. To complete inspections and repair of electrical equipment including rides and other park facilities. Responsibilities: Specific Duties and Responsibilities: * Repair electrical and electronic equipment * Analyze equipment malfunctions to determine cause and corrective action * Access all areas of ride structures for inspections and maintenance * Install adequate temporary and/or permanent power for events and festivals throughout the season * Assist with various electrical needs for new construction and remodeling projects as assigned * Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them * Maintain positive interaction with other employees and guests * Other tasks and duties as assigned Qualifications: * State Journeyman's license preferred * Theme park ride experience a plus * Must be experienced in maintaining and troubleshooting equipment using PLC, and relays * Experience in installation, repair, and maintenance of electrical equipment * Able to stand and walk for long periods xevrcyc of time outdoors in extreme heat/cold and sun * Able to carry tools and lift at least 50lbs * Must be comfortable working at heights over 50ft * Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed * Must possess a valid Driver's License with a good driving record * Must be at least 18 years of age

Specific Duties and Responsibilities: Have you got what it takes to succeed The following information should be read carefully by all candidates. * Repair electrical and electronic equipment * Analyze equipment malfunctions to determine cause and corrective action * Access all areas of ride structures for inspections and maintenance * Install adequate temporary and/or permanent power for events and festivals throughout the season * Assist with various electrical needs for new construction and remodeling projects as assigned * Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them * Maintain positive interaction with other employees and guests * Other tasks and duties as assigned Reporting Structure: Reports to the designated Electrical Foreman Skills and Qualifications: * State Journeyman's license preferred * Theme park ride experience a plus * Must be experienced in maintaining and troubleshooting equipment using PLC, and relays * Experience in installation, repair, and maintenance of electrical equipment * Able to stand and walk for long periods of time outdoors xevrcyc in extreme heat/cold and sun * Able to carry tools and lift at least 50lbs * Must be comfortable working at heights over 50ft * Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed * Must possess a valid Driver's License with a good driving record * Must be at least 18 years of age

Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Construction Electrician 2 Years of Electrical Experience Required. Assist with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Rosendin policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. ESSENTIAL DUTIES AND RESPONSIBILITIES: Use industry related hand tools and power tools, under supervision. Assist the Inside Wireman with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Inside Wireman with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Inside Wireman to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Rosendin productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Rosendin's safety policies and procedures. SKILLS AND EXPERIENCE: The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. PHYSICAL DEMANDS AND WORK ENVIRONMENT: This section reflects the physical demands and work environment that most people working in this occupation engage in during the course of a workday. However, these occupations often can be performed by those with disabilities and appropriate adaptations. Physical Demands: The employee may require the ability to do the following: Perform ladder climbing, wire pulling and conduit pulling. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Lift 50 lbs. from ground and pull 50 lbs. of force Must have use of feet, legs, hands and arms to climb and/or balance on scaffolding or ladders Must have use of arms, hands and fingers to reach, handle and feel cable, wires, tools and other equipment Must be able to work off of ladders, man lifts, or reach booms without fear of heights. Must be able to see and hear, or have corrected vision, both close and distant, and hearing Must be able to distinguish color coded wires Must be able to adjust vision focus and use peripheral vision and depth perception. Working Environment: While performing duties of this job, the employee may be exposed to: A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Work is sometimes noisy, cramped, and dirty Hazards include risk of electrical shock and other work-site accidents 40-hour workweek is normal, however, if offered, working overtime may be included; electricians may work nights or weekends Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business…and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

American Airlines Center is one of the nation's top arenas. Since openings its doors in 2001, American Airlines Center has been setting the precedent for sporting and live entertainment events. Bringing in a variety of big name shows and housing both the Dallas Mavericks and the Dallas Stars. American Airlines Center serves more than 2 million guests during 200+ live events each year. We aim to provide genuine, memorable and innovative experiences to every single one of our guests and demand excellence and creativity in everything we do. The Maintenance Electrician inspects, repairs, coordinates, installs, modifies and maintains electrical-systems and electrical and mechanical equipment to ensure continuous proper operation at the AAC facility during varying shift times, including nights, weekends and Holidays. This FULL TIME direct hire position is great for someone looking to move indoors and get away from the Texas heat or gain experience to work towards their masters electrician license. Comes with benefits such as medical, dental, vision, PTO, 401(k), etc. Essential Functions: * Performs and documents preventive maintenance on all electrical systems, control systems, and vertical transportation control systems to ensure excellent working conditions and compliance to all applicable codes; * Maintains all electrical circuitry and equipment in excellent working condition; including but not limited to stationary and moving equipment normally involved in the operation of a large multi-use facility; * Assists other trade personnel in making various repairs in the arena; * Performs operation of facility equipment and heavy machinery as required for facility operation; * Provides emergency repairs to arena equipment during event operations to ensure the success of the event; * Coordinates and supervises contractors and vendors performing electrical or electronic work in the facility; * Utilizes CMSS system to include interpreting/prioritizing work orders, performing work requested and completing work orders per instruction; * Programs and troubleshoots PLC based control systems; * Maintains a working knowledge of Security (CCTV) and Fire systems; * Maintains and performs working assignments on all voltage systems including 120/208, 277/480 and 5KV; * Other duties as assigned. Education/Qualifications: * College Degree in an electrical technology field preferred or High School Diploma/GED or graduated from a certified electrical apprenticeship program * Bilingual English/Spanish is preferred * 5 years minimum of commercial Journeyman experience * Working knowledge of PLC is preferred * Must have extensive knowledge of the NEC * Must have advanced education in the maintenance repair and operation of electrical equipment, mechanical and production based equipment and control systems and typical public assembly of facility equipment * Must possess a current State of Texas Journeyman Electrical License * Knowledge of electrical safety Personifies our core values of INTEGRITY, TEAMWORK, PASSION, and EXCELLENCE at all times. Physical Demands/Work Environment * Ability to reach with hands and arms use hands to handle, or feel, stand, climb or balance and stoop, kneel, crouch, or crawl, walk and sit; * Ability to lift and/or move up to 50 pounds while twisting and/or turning working at heights, including Catwalk work, and frequent climbing of stairs and ladders * Ability to work in small and confined spaces * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus * Ability to work at heights and in extreme conditions * Must be flexible in ability to work all hours/shifts in a 24/7 facility. Work hours are based on Events. * Ability to respond during normal business hours, after hours and on weekends via cell phone is required/company phone allowance is provided. Employee selects service plan and is responsible for the repair and/or replacement of the phone * Employees with this phone access requirement are not restricted in their movement, location, and activities during off hours when they are not at work * The noise level in the work environment is usually moderate, however, during events, the noise level may be loud * Position is required to work in exposed wet and/or humid conditions * Position is required to work near moving mechanical parts, high, precarious places, fumes or airborne particles, toxic or caustic chemicals, outside weather conditions, extreme cold, extreme heat and risk of electrical shock * Employees must be able to work on evenings, weekends and holidays as required. AMERICANS WITH DISABILITIES ACT - JOB ACCOMMODATION REQUESTS Any individual who requests a job accommodation due to a physical or mental impairment will require a dialogue with Human Resources to determine if the individual can perform the essential duties of the job, with or without a reasonable accommodation. Medical documentation will be required to support any request for medical restrictions that impact job duties. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Details Encore Wire McKinney - McKinney, TX Full Time Full TimeDescription An Electrical Control Technician at Encore Wire will be primarily responsible for the safe rectification of machinery and equipment used in the various production plants and throughout the facility as directed by Supervision or Company dictated equipment priority. The Control Technician must be able to work on all facility wide electrical systems. A good understanding and experience of all mechanical and electrical disciplines is needed, these would include hydraulics and pneumatics. Essential Job Functions Experience and technical knowledge of the operation of AC and DC drives. A thorough understanding of speed feedback devices theory and operation. An understanding of temperature control and temperature components. A good understanding of PID and control loops. A good understanding of Ethernet communications and connections. Proficient in PLC and HMI systems, to include communications drivers and connections, PLC program navigation and controlled manipulation. A thorough understanding of all electrical components and electronic devices. Show an understanding and demonstrate the processes involved in diagnosing defective components, motors, drives and electronic components. Able to demonstrate the ability to use diagnostic equipment. Experience with selecting electrical components when original OEM components are not available. NOTE: This job description does not contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Qualifications Other Skills/Abilities The candidate must be a Team player and be willing to share his knowledge freely. The candidate will be required to work with all team members undertaking any and all roles from leading a task to cleaning up after a task. A successful team member will have extremely good work ethic and a great punctuality and attendance record. Physical Requirements Requires repetitive movement Requires walking Requires kneeling, crouching and stooping Requires using hands to handle, control, or feel objects, tools or controls Requires lifting up to 50 pounds while bending, twisting and/or standing

About Us: Tioga Plumbing & Electric is a family-owned and operated, fast-growing company serving both residential and commercial clients across the DFW metroplex. With a reputation for excellence, we specialize in plumbing and electrical services for new restaurant builds, as well as providing expert service to both commercial and residential customers. We are committed to providing top-quality customer service, and we're looking for a driven individual to join our team! Position Summary: We are seeking a skilled and safety-focused electrician with experience in residential, light industrial and commercial environments. Responsibilities include installing and troubleshooting electrical systems, wiring various voltages (120v, 240v, and low voltage), and working with EMT and rigid conduit. Candidates should be familiar with NEC codes, wire and conduit sizing. The ideal applicant demonstrates and maintains a professional attitude and possesses a current and valid driver's license with reliable transportation and current, valid Wireman or Journeyman license through TDLR. Applicant must have a clean driving record and the ability to pass a background check and drug test. Tools and Equipment: Applicants must have knowledge of and experience using industry-standard tools such as benders, threaders, knockout sets, multimeters, conduit reamers, torque wrenches, wire strippers, and hand and power tools required for installation and troubleshooting tasks. Compensation: Progressive Performance based hourly pay with unlimited earning potential Company vehicle is provided Duties and Responsibilities: Install, maintain, and repair electrical systems and components in industrial and commercial environments Measure, cut, bend, and run EMT and rigid conduit according to specifications and blueprints Wire and terminate systems at 120v, 240v, and low voltage Determine appropriate wire and conduit sizes based on load requirements and NEC codes Troubleshoot and resolve issues in electrical circuits and control systems Mentor and assist less experienced electricians to ensure quality workmanship and safety Maintain accurate records of work performed and materials used Ensure compliance with all safety protocols, job site procedures, and electrical codes Physical Requirements: Must be able to lift and carry up to 50 lbs. frequently and heavier loads with assistance Ability to stand, walk, bend, stoop, kneel, and crouch for extended periods of time Comfortable working on ladders, scaffolds, and in confined spaces Must have full range of motion to handle tools and materials Ability to work in various weather conditions and on active construction sites Must have good hand-eye coordination and manual dexterity What We Offer: Competitive hourly wage Opportunity for career growth in a rapidly expanding company Supportive and dynamic work environment Paid training and development opportunities Health, dental, and vision insurance Aflac Vacation Company sponsored events Note: This job description is not exhaustive and may be revised to reflect the evolving needs of the company. Management reserves the right to amend duties and responsibilities, as necessary. Powered by JazzHR um Ov23lMBk