Industrial electrician jobs in Clarksville, TN

Maintenance Technician - Facilities Technology (Night Shift) $29.15-$33.15/hour starting | Up to $36.75/hour top-out Full-time | On-site | Relocation assistance available We are seeking a skilled and dependable Maintenance Technician to join our Facilities Technology team. In this role, you will perform preventive, predictive, and shutdown maintenance to ensure all equipment and systems operate safely, efficiently, and at peak performance. This position offers competitive pay, clear growth potential, and the opportunity to work in a collaborative, safety-driven industrial environment that values teamwork and continuous improvement. Shift Details Training: Candidates will begin on day shift for onboarding and training. Permanent Schedule: Night shift (5:45 PM - 6:00 AM), operating on a 2-2-3 schedule - work two days, off two days, then work three days, alternating every other week. Shift Premium: Includes a $2.00/hour night shift premium. Compensation & Growth Starting range: $29.15-$33.15/hour, based on prior industrial maintenance experience. Performance-based step increases available up to $36.75/hour top-out within approximately 6-18 months. Additional overtime opportunities may be available. Key Responsibilities Perform all maintenance work safely, professionally, and to standard, following all company and regulatory guidelines. Conduct mechanical and electrical troubleshooting, repairs, and preventive maintenance on facility and production equipment. Accurately document all maintenance activities in the company's maintenance management system. Support continuous improvement and 5S initiatives to enhance equipment reliability and workplace organization. Collaborate with operations, quality, and EHS teams to maintain optimal plant performance. Interpret and work from blueprints, schematics, and technical documentation. Perform welding, fabrication, and basic machining tasks as needed. Utilize computerized diagnostic tools and PLC systems to identify and resolve equipment issues. Execute other duties as assigned by management. Qualifications Education High school diploma or GED required. Completion of a 2-year accredited Industrial Maintenance Certification program preferred. Experience Minimum of 1 year of maintenance experience in a manufacturing or industrial environment, or completion of an equivalent technical program. Skills & Knowledge Strong mechanical and electrical troubleshooting skills. Familiarity with predictive and preventive maintenance methods. Ability to read and interpret technical drawings and schematics. Working knowledge of PLC systems, CMMS software, and industrial controls. Excellent communication, teamwork, and problem-solving abilities. Understanding of production processes, quality standards, and equipment reliability practices. Physical & Work Environment Requirements Regular standing, walking, bending, kneeling, and lifting (up to 50 lbs unassisted). Ability to work at heights (10+ feet), in confined spaces, and in temperature-variable environments (warm or cold). Consistent attendance and reliability are essential for success in this role. If you are a hands-on maintenance professional who takes pride in problem-solving, optimizing equipment performance, and ensuring smooth plant operations, we encourage you to apply.

Feel like your hard work and talent is going unnoticed in your current position? EOSYS is growing and looking to hire the best Lead Industrial Electrician to join our Nashville area team. xevrcyc Check you match the skill requirements for this role, as well as associated experience, then apply with your CV below. Pay range for this role is $35 - $40/hr. depending on experience.

Residential Service Electrician - Columbia, TN Pay: $46,800 - $100,000+ per year Job Type: Full-Time Pay Structure: (Negotiable based on experience) First 30 Days: $22.50/hour After 30 Days: 100% Commission (20% of collected revenue minus materials & additional labor) Bonus and Spiff Opportunities About the Role Mr. In order to make an application, simply read through the following job description and make sure to attach relevant documents. Electric of Columbia, TN is hiring a Residential Service Electrician to join our growing team. We set all appointments for you so you can focus on delivering exceptional service, solving electrical issues, and ensuring homeowners feel safe and confident in their homes. If you excel at troubleshooting, value professionalism, and want control over your earning potential, this role is a great fit. Why Work With Us --High Earning Potential Our proven customer process and strong appointment flow allow electricians to earn $46,800-$100,000+ annually, with top performers reaching six figures. --We Invest in Your Success --Robust customer-service training --Weekly team development meetings --Clear roadmap to maximize commission earnings --Benefits (after 120 days) Medical, Dental, Vision insurance Paid time off Company vehicle Company uniforms (immediately) iPad + field software (immediately) What You'll Do Diagnose and repair residential electrical issues Install fixtures, circuits, EV chargers, panels, and more Communicate clearly with homeowners and provide safety-focused recommendations Ensure personal and customer safety at all times Leave every home safer than you found it Experience with residential troubleshooting is required. How We Measure Success High-quality, code-compliant workmanship Excellent customer satisfaction Timely and efficient job completion What Makes You a Great Fit Positive, professional, and detail-oriented Comfortable using technology (iPad, apps) Strong communicator who enjoys meeting new people Welcomes feedback and ongoing growth Dependable, respectful, and safety-focused Requirements Minimum xevrcyc 2-4 years of residential electrical experience TN LLE License (Required) Valid driver's license with clean driving record Ability to commute to Columbia, TN (or relocate before starting) Authorized to work in the U.S. Pass background check and drug screen Compensation First 30 Days: $22.50/hour After 30 Days: 100% commission 20% of collected revenue Minus materials and additional labor Bonus and spiff opportunities Schedule Monday-Friday, 8-hour shift Overtime occasionally required to finish customer jobs Occasional Saturday travel required for training and professional development How to Apply Email your resume to: We look forward to meeting you!

Akkodis is seeking a Electrical Technician for a 12+ months Contract position with a client located in Memphis, TN Pay Range: $20-26/hr on W2 (The rate may be negotiable based on experience, education, geographic location, and other factors.) Job Description - Essential Duties 1) Assembles finished units per customer specifications. Coordinates with teammates to organize tasks requiring multiple team members to accomplish. 2) Utilizes manual and automated lifting devices while adhering to product safety specifications. 3) Pull, crimp, install, and test electrical wiring and wiring harnesses. 4) Keeps inventory personnel abreast of spare parts inventory and locations for ease of order fulfillments. 5) Performs part replacement on tools as needed and according to schedule. 6) Resolves routine questions and problems, referring more complex issues to higher levels. 7) Works under direct, close supervision, with output monitored frequently. 8) Follows mostly routine, standardized procedures to accomplish assigned tasks. 9) Selects from a variety of established procedures to perform assigned duties. 10) Follow detailed written or verbal instructions, including visual aids. 11) Ensure that assigned area is clean and organized per 5S standards. 12) Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. 13) Comply and follow all procedures within the company security policy. 14) May perform other duties and responsibilities as assigned. REQUIREMENTS: Ideal candidates have 1+ years background in electrical wiring Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to operate a personal computer including using a Windows based operating system and related software including training and knowledge of Jabil's software packages. Read and understand visual aid. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to add, subtract, multiply, and divide in all units of measure. Ability to interpret graphs and diagrams. If you are interested in this Electrical Technician job in Memphis, TN please contact Ishwar Gupta at ************** or *****************************. For other opportunities available at Akkodis go to **************** Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees with the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records by federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions-from design and installation to ongoing maintenance and emergency support-helping clients maximize building performance, energy efficiency, and equipment lifespan. Position Summary The Electrician Helper supports licensed electricians in installing, repairing, and maintaining electrical systems on commercial and industrial job sites. This entry-level role focuses on assisting with tasks, learning trade skills, and ensuring a safe and organized work environment. Key Responsibilities Assist electricians with material handling, tool setup, and job site preparation. Pull wire, run conduit (EMT/PVC/RMC), and install basic electrical components under supervision. Help with mounting boxes, panels, and fixtures as directed by the lead electrician. Maintain a clean and safe work area; follow all company safety policies and procedures. Carry out basic measurements and cuts for conduit and cable; operate hand tools safely. Support wire terminations and labeling under guidance. Transport tools, equipment, and materials to designated areas on the job site. Attend daily safety meetings and communicate effectively with team members. Assist with cleanup, inventory, and organization of tools and materials at the end of each shift. Qualifications 6+ months of electrical or construction experience preferred; willing to train motivated candidates. Basic knowledge of hand tools and power tools; ability to learn electrical trade practices. Ability to read simple instructions and follow directions accurately. OSHA-10 certification or ability to obtain within 60 days. Valid driver's license and reliable transportation. Physical ability to lift 50 lbs, work on ladders/lifts, and in various weather conditions. Strong work ethic, willingness to learn, and commitment to safety. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holiday pay. Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Seeking a Licensed Industrial Electrician with high voltage experience for Production machine wiring/installation project and/or Electrician Helper to assist. 1099 Contractor or Full-Time employment. . Morning and night shift opportunities available. General Responsibilities Plans new or modified installations to provide access for future maintenance and avoid unsightly and hazardous wiring, consistent with specifications and local electrical codes Prepares sketches showing location of wiring and equipment, or follows diagrams, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring Installs electrical conduits as per requirements Installs wiring and verification of electrical safety of installed work Observes overall functioning of installed equipment or system to detect need for adjustments, relocation, or replacement The Company reserves the right to add or change duties at any time Job Qualifications Must have experience with 480V Electrician candidates must be licensed in state of TN; helpers do not need to be licensed Skills Communication Assessment/evaluation Problem solving Electrical equipment and related tools Knowledge of local electrical codes Knowledge of safety requirements Self-motivated Must be hands-on with all jobs assigned

Rogers Group, Inc., headquartered in Nashville, is a privately held aggregates and asphalt highway construction company operating in 12 states with over 3,000 employees. RGI, established in 1908, has the distinction of being recognized as the largest privately held aggregate producer in the United States. We have 86 quarries and 56 asphalt plants across Tennessee, Mississippi, Georgia, Alabama, South Carolina, North Carolina, Kentucky, Arkansas, Texas, Indiana, Illinois, and Ohio. Job Details: Rogers Group Inc - Louisville, KY Full-Time Approximate shift times of 6 a.m. - 5 p.m. or as needed by the operation. Wages are expected to be between $38-$45 per hour. Higher starting pay may be available based on experience and certification. Candidate is bonus eligible upon successful completion of MSHA electrical exam after one year of service. This position would include a company service vehicle for business and commute purposes. Overtime available and extensive medical and retirement benefits. Rogers Group is currently seeking an individual to fill an INDUSTRIAL ELECTRICIAN position for our 3 local quarries. This individual will be responsible for analyzing and correcting electrical problems and will repair and overhaul electrical equipment and controls. The successful candidate for this role will have an uncompromising focus on safety excellence. QUALIFICATIONS 3-5 years of previous electrical experience is required, with minimal of a journeyman's license strongly preferred. Industrial electrical experience is required, industrial electrical experience in a mining environment is preferred. Must be willing to work overtime Analyzes circuits, wiring diagrams and drawings to install, repair, calibrate, service or replace electronic devices and systems. Receives wiring diagrams, specifications and instructions from supervisor covering emergency and scheduled repairs, installation, and electrical inspection work to be performed. Performs work requiring a thorough knowledge of electrical theory and principles, statutory codes, properties of materials and principles of operation of electrical equipment. Starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements. Services electronic equipment by checking, testing, and replacing faulty components, circuits, printed circuit boards, and similar electronic devices. Installs, repairs, and maintains communication cables, power distribution cables, then splicing pieces as required. Familiarity and experience working with PLCs (Programable Logic Controllers) Experience working with High Voltage (480 volts) required Fabricates parts if not commercially available, using machine and hand tools common to the trade. Determines need for, analyzes, and makes necessary running adjustments, repairs, and overhauls. Advises and cautions operators and mechanics about potential electrical problems and inherent dangers involved. Notifies supervisor of potentially dangerous electrical equipment noted and corrective action taken. Must be able to work outdoors in all weather conditions (heat, cold, rain, dust, etc.). Must be able to stand, walk, bend, and stoop for extended periods of time throughout the workday. Must be able to lift, carry, push, and pull materials or equipment weighing up to 50 pounds on a regular basis. Rogers Group provides extensive benefits, strong compensation, and a safe, drug-free working environment. As a Rogers Group employee, you will have access to our competitive company perks, including: Medical, Dental, Vision Insurance plus Health Savings Account with annual company contribution. Company provided Group Life and Accidental Death & Dismemberment insurance. Retirement 401(k) with company contribution and match at one year of service. Company provided Short- and Long-Term Disability. Paid Holiday's including Christmas shutdown between Christmas and New Years Day. Paid vacation available after 180-day probationary period and accrued based on years of service. Annual performance-based merit increases. Career growth/advancement opportunities. RGI EEO Statement It is the policy of Rogers Group, Inc. to recruit, hire, and promote individuals based on demonstrated merit and qualifications. We are committed to providing a work environment that is free from discrimination, harassment, and retaliation as protected by applicable federal, state, or local laws. All applications are accepted online at ***********************

? EOSYS is growing and looking to hire the best Industrial Electrician to join our Nashville team. Pay range for this role is $30 - $35/hr. depending on experience. Why Work at EOSYS? At EOSYS, you're not just another person added to our headcount. When you work at EOSYS you become part of the EOSYS family. Our people are some of the most talented and engaged in the industry. As a leader in providing industrial automation and integration services, we offer stimulating, challenging projects across various industries including Food & Beverage, Chemical, Pulp & Paper, Automotive, Metals, and Utilities. We work in small teams, build strong relationships with our colleagues and customers, and provide many opportunities for career development. For all these reasons and more, our employee-owners have a strong sense of accomplishment and choose to call EOSYS home. The Industrial Electrician is a hands-on member of the industrial control field installation team with responsibility for the training and mentoring of installation team members (1-2 teammates). Responsibilities * Works independently with little supervision to successfully execute electrical and equipment installation projects/tasks both on and offsite. * Ensures personal safety and quality standards are followed. * Engages customers during installation project to ensure satisfactory completion. * Engages customers while onsite to seek other project opportunities. * Ensures organization of all tools and inventory. * Performs installation and decommissioning of components, wiring and equipment. * Assembles and modifies custom control enclosures and devices per electrical schematics and installation plan documents. * Works with Engineering to test, check out, and troubleshoot large, complex systems. * Runs wiring and conduit for installation of equipment and systems at customer work sites. * Participates in continuous improvement activities. * Drives company trucks and vans with trailers. * Operates forklifts and manlifts. * Coordinates and executes small scale projects with support from Installation Manager. * Manages team member(s) during the duration of installation projects with support from Installation Manager. * Completes and files appropriate project related paperwork. Requirements * High school diploma or equivalent * Two-year technical school, trade school, electrical apprenticeship program, contractor's license or other related industry certificates or licensure a plus * OSHA 10- or 30-Hour Training and Safety * Five or more years of experience in any of the following or equivalent experience: * Industrial electrical maintenance * Industrial electrical construction and/or service * OEM experience with major manufacturing companies * System Integration and/or Automation equipment installation * Experience working in an industrial environment * Experience in specialty terminations of industrial control panels and devices per electrical schematics (e.g., network cables, fiber-optics, various PLC and I/O components, etc.) * Possess a valid driver's license and have a clean driving record as well as reliable transportation * Must be able to commute to Smyrna, TN as the permanent job location as well as travel out of state for short term project assignments * Must be willing to work overtime, weekends and holidays as required * The capability of achieving a Master Electrician or Electrical Contractor certification within 1 year of employment is a plus Skills * Project management for installation projects, including but not limited to the following tasks: * Understanding and planning for appropriate project start and completion dates and time * Developing and communicating the appropriate order of operations for the work to be completed to the team member(s) * Understanding and planning for appropriate project start and completion dates and time * Developing and communicating the appropriate order of operations for the work to be completed to the team member(s) * Identifying the appropriate tools and materials to complete the work, and ensuring those tools are brought to the location in which the work will be completed * Managing a small installation team (1-2 team members) and ensuring the successful completion and customer satisfaction for the project * Providing technical instructions and feedback * Reference and interpretation of electrical codes (e.g. NEC, NFPA, UL) * Reading and understanding blueprints, schematics and control diagrams * Strong knowledge of electrical fundamentals * Mechanical and layout skills with enclosures, conduit, and tray Work Schedule Ability to work overtime, nights, weekends, and holidays as required. Flexibility often required for short notice schedule changes. Regular travel and overnight stays are required for projects out of town. Travel requirement is 30-40% throughout a calendar year. Projects average 2-3 weeks in duration with overnight stays required. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work environment for this job is a combination of office and industrial setting with some exposure to inclement weather. Industrial environments vary and can include dusty, dirty, hot or wet conditions or in confined areas or other uncomfortable places. Must be authorized to work in the United States. EOSYS is not currently accepting work visas. The EOSYS Group is an Equal Opportunity employer and provides equal employment opportunities to all qualified applicants without regard to race, color, religion, age, national origin, disability status, genetics, protected veteran status, sex, sexual orientation, sexuality, transgender status, gender identity or expression, or any other characteristic protected by federal, state or local laws. If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting our HR department at ************.

Join Reynolds Consumer Products…and Drive Your Career across a world of opportunities! We provide amazing job opportunities for growth with competitive hourly pay and benefits in an exciting, dynamic, fast-paced, and fun workplace environment. Are you looking to build a strong career? Then we have an opportunity for you! We currently have an opportunity for an Industrial Electrician to join our team at our manufacturing facility in Louisville, Kentucky. Pay: $40.96/hour and up to $2.25/hour shift differential Responsibilities Your Role: As an Industrial Electrician, you will provide support to various teams for troubleshooting, repairs, projects, and any other electrical needs. You will have the opportunity to Make Great Things Happen! Make safety your number one priority by driving our safety initiatives. Support maintenance programs. Troubleshoot and repair electrical and mechanical equipment. Ultimately, you will be a go-to person for any and all electrical issues within the plants. You will love it here if… You put safety first, always You listen, learn, and evolve You are passionate about collaboration, teamwork, and achieving shared goals You treat all people with respect, operating ethically, and embrace inclusivity You are committed to improving our impact on local communities What we have to offer you here at Reynolds Wisely Pay Card - so you can get your money fast. Comprehensive Benefits Plan (Medical, Dental, and Vision) Wellness Program that pays you back up to $1,000 a year! 401K Employee Referral Program earn up to $1,000. Life Insurance Employee Assistance Program (EAP) Requirements We need you to have: High School diploma or equivalent A formal electrical or related electrical apprenticeship or four (4) or more years with three (3) years of experience as an electrician in a high-speed manufacturing environment; or the equivalent experience and proficiency attained through a formal electrician or related electrical apprenticeship; or an associate's degree in electrical engineering technology with three (3) years of experience as an electrician in a high-speed manufacturing environment. A thorough understanding of basic electrical and electronic theory, National Electrical Code Standards and troubleshooting logic and practice on AC and DC equipment and circuits Ability to use and read various types of instruments, meters, gauges, dials, etc. Ability to read, understand electrical schematics and PLC programs, diagnose equipment problems and determine if equipment or process operating properly. Calculations frequently required determining correct settings, and adjustment required to calibrate equipment and processes for specific performance. Ability to use various equipment such as man-lifts, hoists, bucket trucks, and other mobile equipment. Ability to use various hand tools and powered tools. Safe work practices, safety shoes, safety glasses are required as well as hearing protection and protective clothing required in certain areas and when performing specific tasks. Ability to perform majority of the work inside a ventilated building; however, outside work required in all types of weather. Noise levels in most areas less than 90 decibels. Icing on the cake: Manufacturing experience preferred as well as troubleshooting experience. Want to know more? Check out our website or connect with us on LinkedIn! Apply today to join a fast-growing innovative company! Not a good fit but know someone who is? Please refer them! Local candidates only, no relocation assistance available Join Reynolds Consumer Products and Drive Your Career across a world of opportunities! For applicants or employees who are disabled or require a reasonable accommodation for any part of the application or hiring process, you may request assistance by emailing us at ******************************. No recruiter calls or emails please. RCP affords equal employment opportunities to applicants without regard to race, color, religion, age, disability status, sex, marital status, protected veteran status, pregnancy, national origin, genetics, genetic information, parental status, or any other characteristic protected by federal, state or local law. RCP conforms to the spirit as well as to the letter of all applicable laws and regulations. Pay Range USD $40.96 - USD $40.96 /H

Are you an experienced Maintenance Electrician looking for a new and exciting opportunity that offers a competitive salary and outstanding benefits? We have direct hire positions available in the greater Memphis, TN area. If you meet the qualifications below then please submit your resume today for consideration! Pay ranges from $100k-$160k/yr. Job Responsibilities Maintain, troubleshoot, and repair complex production machinery and equipment Complete various projects Install new equipment Assist in production Job Qualifications 3-5 years Electrical Industrial Maintenance experience Must be able to read electrical/mechanical drawings and schematics Must be able to understand ladder logic PLC and drive experience required

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: all duties must be performed in a safe manner according to company safety standards and regulations/specified NEC codes if applicable. Other duties may be assigned as directed. Preform mechanic skills including mechanical, pneumatic, hydraulic, and simple electrical troubleshooting and repair. Read and comprehend production equipment operations and service manuals to aid in machine troubleshooting and repair. Perform simple machinist task. Identify and install parts from inventory and document. Identify high voltage and low voltage circuitry. Perform plumbing, basic carpentry and painting task. Maintain waste management (paper, metal, wood and chemical) Adhere to all safety regulations and maintain clean an orderly work area. Fabricates with metal and/or repair metal structures, includes welding and torch use. Trains operators and/ or supervisors in the proper way to maintain / inspect machines. Basic computer skills, including Windows, Word Processing, spreadsheets, and MPS System (Maintenance database software) and SAP. Blueprint/schematic reading-drawing. Preventative maintenance Blueprint/schematic reading-drawing. Safety - must be able to perform all requirements safely. Perform other tasks as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Industrial Maintenance Certification or Industrial Electrical Certification. Previous & demonstrated experience with hydraulics, pneumatic, electrical systems, and motor & controls. LANGUAGE SKILLS Able to communicate with his or her manager or supervisor and understand instructions, as well as communicate with fellow employees while on a job. Be able to read a Maintenance work order, and or fill out a maintenance work order. MATHEMATICAL SKILLS Ability to add, subtract, and multiply fractions. Be able to use a calculator for all aspects of math functions. Be proficient with a protractor. REASONING ABILITY The Employee shall be able to isolate mechanical, including (pneumatic/hydraulic), and basic electrical problems and repair them within a reasonable amount of time. PHYSICAL DEMANDS Employee must be able to occasionally lift/carry 1-20 pounds and lifting 21-50 less often from the ground to waist height. This job requires some reaching, kneeling, squatting, and climbing stairs. Hand/wrist work including power grasping, pushing and pulling materials, walking and constantly standing on your feet all day. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. WORK ENVIRONMENT The Employee must wear protective eyewear and earplugs when using compressed air, use of power tools, and during many maintenance functions. There will be work will be inside the plant with some outside work, as well as on the roof, and in the ceiling inside the plant. The plant is chilly in the winter, and hot in the summer. The plant is generally clean of debris and clutter, but the manufacturing process generates a fair amount of corrugated dust. There are no hazardous materials inherent in the manufacturing process. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

Servtech, a Roeslein Company, specializes in creating essential industrial equipment for various sectors such as energy, mining, industrial power, and bio-energy solutions. We have extensive experience in designing and manufacturing a variety of products including: Power Distribution Centers (E-Houses) (Oil, Gas, Water) LACT Stations, Custody Transfer Metering Prefabricated Pump Stations Instrument Air Stations Custom Electrical and Motor Controls and Panels UL Listed PLC Panels, SCADA, and Telemetry Systems Mission Critical (PDCs & Edge Data Centers) To learn more about Servtech, please visit ***************************** SUMMARY Servtech, A Roeslein Company, is seeking a dedicated Electrical, Controls Test technician to join our dynamic team at our manufacturing facility. In this role, you will be responsible for performing factory acceptance testing and assisting in quality control of our products. We are seeking an individual who is committed to performing high-quality work safely, pays close attention to detail, and has a strong focus on customer satisfaction. The ideal candidate will be capable of working both independently and collaboratively within a team environment. ESSENTIAL DUTIES AND RESPONSIBILITIES Proficient use of hand tools and test equipment is a must. Safely test industrial electrical equipment from 24vdc to 480vac. Perform function tests on all products. Must be able to use electrical testing tools such as fluke multimeter, insulation testing Meters, High Potential Voltage testers, ETC. Complete inspection/testing documentation. Must be able to proficiently interpret data from electrical and mechanical diagrams and schematics. Perform QC hold points. Verify manufacturing quality/non-conformances. Must be computer literate (e.g., basic data entry programs and time-entry applications) Must be NFPA 70E Certified. Must be willing to travel to multiple manufacturing locations to perform QC checks and training. Must follow training and company procedures. Must be a leader who represents the organization with the ability to be a liaison to our customers, adhere to company standards, and resolve issues with urgency and professionalism. Must follow good housekeeping practices. Must comply with Roeslein & Servtech's core values for the safe and efficient operation of the business and the commitment to maintain respectful relationships with all employees. Performs all work in compliance with company standards, does not deviate from policies and procedures, and adheres to regulatory requirements. Safety is essential at Servtech and all safety training classes must be completed with a 100% pass rate. Requires effective time management skills, personal conduct, and change management abilities. Ability to effectively interact with co-workers, clients, vendors, and other business contacts. Other duties as assigned. KNOWLEDGE / SKILL / ABILITY / EDUCATION / EXPERIENCE A High School Diploma or G.E.D. is preferred but not required. 1-2 years troubleshooting PLCs, VFDs, power, and control systems. 1-2 years troubleshooting mechanical and pumping systems 1-2 years in quality control. Must possess the ability to interact effectively with all levels of personnel, both hourly and management, in a team environment. Must work well with others in a team-oriented environment. Must meet deadlines while working safely and producing a quality product. Ability to work flexible hours including overtime. Must adhere to the Company's attendance policy. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this position, the employee is regularly required to walk, stand, use hands and fingers, grip, handle or feel; reach with hands and arms; climb or balance; stoop; kneel, crouch, or crawl; and talk and hear. Ability to lift and carry 50 lbs. regularly is required. Must be able to stand/walk 90% of the time and sit 10% of the time. Requires the ability to work from heights while utilizing the appropriate PPE (Personal Protective Equipment) for each situation. WORK ENVIRONMENT Work is performed in a manufacturing environment with an uncontrolled atmosphere. Exposure to harsh conditions-such as dust, fumes, chemicals, hazardous materials, noise, and varying weather and temperatures-for short periods is possible. All employees are required to follow safety standards and wear all personal protective equipment in designated areas. COMPENSATION AND BENEFITS $34.00 - $42.00 per hour Health insurance plans for you and your family HSA (Health Savings Account) FSA (Flexible Spending Account) Dental/Vision/Life insurance A 401K program as well as an ESOP (Employee Stock Ownership Plan) Paid Sick Leave Paid Vacation Paid Holidays Education and tuition reimbursement Paid Parental Leave $25,000 Company-paid Life Insurance Bonus based on Company performance (Colorado requirement) Servtech Inc., a Roeslein company, is an Equal Opportunity Employer. The job description does not necessarily contain all the actual or essential duties of this position. All job offers are contingent upon passing a drug screen and criminal background check. The deadline to submit applications is October 23, 2025.

EXCITING OPPORTUNITY**RELOCATION ASSISTANCE AVAILABLE** Hussian College in Nashville, TN, is launching a new Electrician Technician program and is seeking a Program Chair to lead the program. The Program Chair, with the support of their direct manager, provides leadership for the assigned program(s) by articulating and executing the vision of the organization and the academics department. This position is responsible for the management of the program, overseeing the student experience and student success, and representing the department in school and industry matters. Through this role, this individual fosters growth and excellence in their faculty, in their students, and, in the school as a whole. Position Responsibilities: Teaches course load based on business and scheduling needs Provides leadership to program faculty, ensuring a quality educational experience for students Identifies, hires and trains program faculty Collaborates with Dean and Registrar's Office to develop course schedules and faculty teaching assignments Ensures training and professional development of program faculty Completes faculty observations and provides coaching and feedback Collaborates with organizational leadership and the curriculum department to maintain program curriculum Proactively monitors and mentors students, providing support that results in persistence to graduation Monitors student academic performance and develops effective interventions as required Effectively resolves student concerns or complaints Coordinate and/or participate in new student orientation, graduation and other campus events Assists in securing community leaders, discipline professionals, and employers to serve on the Program Advisory Board Facilitates Program Advisory Board meetings Participates in professional development activities Other duties as required Experience: Minimum of four years of practical work experience in the electrical field. Prior teaching or training experience helpful, but we provide training for those with no prior teaching or training experience. Prior management/supervisory experience a plus. Competencies: Proven leadership abilities Develops and presents educational materials in an engaging manner Demonstrate a high level of discernment and appropriate judgement Ability to effectively manage multiple, sometimes competing, priorities Project a professional image and provide outstanding customer service Keep commitments, meet deadlines, and achieve demanding results Practice excellent organizational and recordkeeping skills, with meticulous attention to detail Communicate effectively, both orally and in writing Speak effectively to both large and small groups of people Prepare and conduct effective presentations Demonstrate excellent listening skills Cooperate and collaborate as a member of a team Ability to work days, evenings, and some weekends Use Microsoft Word, Excel, and PowerPoint to prepare and maintain records, correspondence, reports and other data

JOB SUMMARY: Responsible for providing electrical support including but not limited to, programming of PLC's from multiple manufacturers (AB, Bosch-Rexroth, Omron), electrical and program troubleshooting, and ongoing project support for manufacturing daily operations and improvements associated with the manufacturing systems. ESSENTIAL ACCOUNTABILITIES: Work safely and in accordance with facility safety guidelines and procedures. Work directly with and provide daily process support to the Operations Team and HPOT teams. Provide technical support for troubleshooting equipment and process related issues as well as continuous improvement of converting processes and equipment. This includes, but is not limited to plant electrical distribution systems, equipment or process control systems, electrical circuits, motors and drives. Facilitate the procurement and or development of equipment and process documentation necessary to support the manufacturing operations. Troubleshoot equipment problems and determine causes in order to implement necessary repair up to and including program modification. Modifies existing logic and writing as projects mandate. Responsible for tuning modifying and installing new manufacturing equipment. Must be flexible in work schedule to support equipment downs or to provide backup shift coverage support on an as needed basis. Demonstrate commitment to the company's RRITE Values of Renew, Respect, Integrity, Teamwork, and Excellence. Associates have a direct and important role in ensuring that all work is performed in a safe manner. Effectiveness in carrying out this responsibility is part of each associate's essential accountabilities. Contribute to a cooperative working effort by demonstrating a willingness to perform other job-related work, as needed or requested. This position is designated as Safety-Sensitive (A safety-sensitive position is one in which the associate's inability or impaired ability to perform their job-related tasks could result in a direct threat to the associate's safety or the safety of others). QUALIFICATION REQUIREMENTS: (To perform this job successfully, an individual must be able to perform each of the essential accountabilities satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.) Minimum of an AS Electronics Technology, a 2 year electronics training program, or equivalent plus 3 years experience with automation and controls equipment including but not limited to AB Control Logix and at least one other controls platform. Must understand the basics of PLC ladder logic, HMI and Vision system programming. Knowledge of robotic programming, 24VDC systems and the ability to make minor modifications to control systems (timers, counters, constants, etc.) preferred. PHYSICAL AND MENTAL REQUIREMENTS: (The physical demands described here are representatives of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions) Must be able to communicate face-to-face and over the phone Occasional lifting up to 50 lbs. Frequent standing, bending, twisting, kneeling, climbing, pushing/pulling and reaching, as well as occasional sitting. Work environment includes occasional noise >85db, hot and cold temperatures and some fumes/odors. Ability to work on ladders and at heights required for the installation of equipment. Requires ability to read write, calculate, interact socially, and reason. Requires good visual acuity with depth perception and color vision. WORK ENVIRONMENT: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Production area Maintenance Shop FLSA Status: Non-Exempt Grade: 09

Electrical & Controls Technician - Build Field-Ready Systems That Power Clean Energy Type: Full-Time Seniority: Skilled Trades / All Levels Join Enexor BioEnergy Enexor is a venture-backed climate tech company near Nashville turning waste into clean energy and high-purity CO₂. We build modular systems that address emissions, waste, and energy access-all in one platform. We hire builders, problem-solvers, and doers who take ownership and get things done. Why This Role Matters We're hiring Electrical & Controls Technicians to wire, test, and commission the next generation of our distributed energy and carbon capture platforms. You'll work hands-on with power, control, and instrumentation systems that must perform in real-world environments. This role is critical to making sure our systems are safe, functional, and field-ready. You'll be the link between engineering design and operational reality. What You'll Do Build and wire electrical panels and field devices to spec Install and troubleshoot PLCs, HMIs, relays, and VFDs Run conduit, pull wire, and terminate connections across modular systems Calibrate sensors and validate control loops (thermal, gas, pressure) Read and interpret schematics, layouts, and wiring diagrams Support commissioning and field deployment of systems Work with engineers and other team members to diagnose problems, debug issues, and close feedback loops fast while maintaining accurate documentation of changes and updates. Provide assistance with continuous improvement of control systems, wiring standards, and panel design practices. Support a wide range of business needs beyond electrical and controls items, assisting cross-functional teams with prototyping, assembly, testing, and general operations as required to meet project and organizational goals. Communicate clearly and proactively with team members, engineers, and leadership to share progress, flag issues early, provide solutions, and keep projects moving efficiently. Demonstrate flexibility to support extended work hours or workweeks as needed to meet critical project deadlines or business priorities. Requirements What We're Looking For Hands-on experience with electrical systems and controls Ability to read and follow schematics and technical drawings Comfortable with tools, meters, and shop/lab environments Strong attention to detail and commitment to quality work Team-first attitude and willingness to own the outcome U.S.-based only. No relocation assistance Bonus Points For: Electrical certifications or trade licenses (Journeyman, OSHA 10/30, etc.) Experience with PLCs, HMIs, or industrial automation Background in energy systems, manufacturing, or cleantech Benefits Why You'll Love It Here Mission with urgency Flat org, fast decisions Equity upside in a growing climate tech startup Hands-on, real-world product work Compensation & Benefits Competitive salary + equity opportunities 401(k) and QSEHRA health stipend Paid vacation and holidays Ready to Build What Matters? Send your resume and a short note to ******************. Mention any relevant builds, fieldwork, or systems you've worked on.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under supervision, the Electrical Technician must be capable of performing all tasks in Astec manufacturing electrical department. Must be able to assemble, evaluate, troubleshoot and correct deficiencies to make certain product specifications are met. Ensure that work is in accordance with relevant codes. This level of electrician will deal with live energized equipment and be trained and capable of performing all required tests and if necessary de-energize equipment to meet safe standards before proceeding. Key Deliverables · Assemble, evaluate, test, and maintain electrical or electronic wiring, equipment, appliances, and apparatus. · Troubleshoot and repair malfunctioning equipment. · Construct and fabricate parts, using hand tools and specifications. · Read and interpret electrical and electrical circuit blueprints and diagrams. · Perform preventative maintenance on a regular schedule. Key Activities & Responsibilities · Demonstrate Astec processes in all aspects of the manufacturing electrical department including panel room, construction manufacturing and industrial manufacturing as warranted by workload demands and scheduling needs. · Test and troubleshoot heaters to ensure equipment is ready before shipping to customer site · Correct and re-test to verify corrective action was successful · Communicate with electrical engineering recommendations to correct or improve processes · Monitor quality issues that warrant concern and encourage postponement of equipment from being shipped · Achieve quality results as it relates to the Company's vision and mission · Promote and educate others on Astec's core values · Follow company policies, procedures, and safety rules at all times To be successful in this role, your experience and competencies are: · High School Diploma or equivalent and/or accreditation from a technical school or an applicable skilled trades program required. · 0-2 years working in manufacturing in order to understand equipment and process procedures · Must be detail oriented, good workmanship while taking and following direction with little to no supervision. · Demonstrated track record of working cross-functionally and as a team necessary. · Strong problem-solving skills desired. · Recognition that at every level growing experience in troubleshooting is essential to evaluate and correct concerns before testing. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

As an Arrow Electrician Trainee, you become part of a Team that is passionate about their craft and shares a common goal of exceeding customer expectations. You will learn from our Professional Electricians as you assist them to perform electrical installations, alterations, additions, and repairs to electrical systems, while helping keep tools, equipment, and materials and work area organized and clean. As an Electrician Trainee, you will be evaluated for enrollment into our Electrician Apprenticeship Program, and that's where your true career growth begins as you receive the advanced training and instruction required to become a licensed Journeyman Electrician. What You Bring Desire to work in and learn the Electrical Industry Commitment to Uncompromised Safety What We Provide On-The-Job TrainingClassroom and Hands-On InstructionElectrical Licensing Test PrepSafety CertificationsHigh Demand Skills/KnowledgeExcellent Pay/BenefitsCareer Growth Pathways ESSENTIAL JOB RESPONSIBILITIES Handles and organizes electrical materials and tools and storage areas. Transports tools, materials, equipment, and supplies to needed areas of the worksite, either by hand or mechanical means. Digs trenches/holes for underground installations. Assists Electricians with the installation of conduit, MC cable, strut, and cable tray, including cutting and threading using hand and power tools. Assists Electricians with wire pulls. Assists Electricians with installation of panels, light fixtures, and devices. Performs work in a safe manner in compliance with all federal, state, local, project, and company safety requirements. Utilize hand and power tools, including cutting devices, drills, saws, hydraulic, and pneumatic and maintain them in good condition. Maintains PPE and safety equipment in good condition. QUALIFICATIONS Desire to work in and learn the electrical industry (1-2 years of experience working in the electrical industry preferred). Commitment to working safely. Careful attention to detail and timely follow-through. High standard of workmanship. Ability to work independently or in a team environment. Ability to take directions, complete tasks, and meet deadlines. Ability to interact with company team members and other contractor employees. Apprenticeship Requirements Must attend a minimum of 144 hours of classroom instruction in each year of the 4-Year Apprenticeship training and maintain a passing grade as well as comply with attendance and other program requirements. Must complete 2,000 hours of on-the-job training in each year of the 4-Year Apprenticeship Training WHAT WE OFFER Competitive Wages Health Insurance: 3 plans to choose from through United Health Care (Effective Date of Hire) Dental and Vision Insurance Life Insurance Short-Term Disability (Company Provided) Long-Term Disability (Company Provided) Employee Paid Policies Available: Critical Illness, Hospital Indemnity, and Accident Policies 401(k) with Company Matching: Paid Holidays (Eligibility Starts Immediately) Paid Time Off (Eligibility Starts Immediately) Paid Bereavement Leave Paid Jury Duty Leave Morrow Financial Planning Services (Free to Team Members) Boon-Health (Coaching/Counseling Program - 2 Free Sessions/Month for Team Members) Employee Assistance Program (EAP) Employee Referral Bonus Program Performance Evaluations Program Arrow SWAG Store (Company-Logo Clothing and Merchandise) Power Tool Incentive Program Safety, Skills, and Leadership Development/Training Electrical License Continuing Education and Renewals Paid Work...Learn…EarnGrow Your Career With Arrow Electric! One Team! One Arrow!

Employee Type: Regular-Full time Union/Non: Ensuring the safe, reliable, and efficient operation of pipeline facilities is what the Electrical Controls Technicians here at Enbridge excel at. If you thrive on troubleshooting and resolving electrical components, then please apply now! What you will do: Perform preventative maintenance, troubleshooting, testing, replacements, and repairs on electrical equipment, instrumentation, and turbine emissions monitoring and controls. Provide operation, maintenance, and troubleshooting of turbine/compressor package unit, which includes start, stop, load adjustment, alarm & operation variables monitoring, and initial response as required. Monitors operational pressures, alarm set points, and react to abnormal conditions. Monitors, operates, and performs routine inspections on station air systems, fuel systems, cooling water systems, oil systems, and safety systems. Assist with resourcing replacement parts. Coordinate planning necessary to perform repairs (Develop procedures & LOTO) Document maintenance work/activities in Company approved software - (Maximo) Contribute to on-call rotation ensuring prompt response. Collaborate with the Area Supervisor, other Electrical Controls Technicians, Mechanical Technicians, and other stakeholders to plan, schedule, and execute maintenance work efficiently and effectively. Maintain facility records and update drawings as required. Maintain critical spare part inventories to minimize downtime. Ensure that electrical maintenance work is performed in compliance with regulations and Company O&M procedure requirements. Resource and oversee contractor crews when required. Perform emergency response / first responder duties. Maintain all Operator Qualifications OQ's and technical competencies to perform major maintenance, repair and/or replacement of complex electrical equipment within the facilities. Assist project teams: design reviews, hazard assessments, pre-bid tours, pre-construction meetings, electrical equipment installation, and equipment commissioning. Maintain Company assigned vehicle with commuting privileges. Work with significant independence on standard assignments. Consistently execute task/assignment in accordance with the Enbridge Safety policy and procedures Develop deep understanding and knowledge of complex equipment and procedures. Serve as a backup Electrical Controls Technicians at other locations on an as needed basis. Assess and ensure work conditions are established to perform work safely, effectively, and efficiently. Who you are: You have the following education and/or experience: High School Diploma and minimal directly relevant training and experience. May be enrolled in one or two-year technical school program or enrolled in the1st year of an apprenticeship program. Competent in NFPE 70E Code & Arc Flash Safety You reside or are willing to reside within 30 miles of assigned location. Must be willing to work overtime, weekends, be on call and standby, and travel overnight as required. Preferred: Associate's Degree in a relevant technical field, such as, Electrical/Controls, Electrical Engineering or Controls Technology, Electronics Technology, or a related field or equivalent education and/or experience. 2-4 years of electrical/instrumentation experience in an industrial type setting OR the equivalent experience necessary to perform required tasks of Technician Level 2 on a stand-alone basis. Physical Requirements: Include but are not limited to: Balancing, bending and stooping, climbing, crawling, carrying ( up to 25 pounds), grasping, kneeling, lifting (objects up to 45 pounds), pulling hand over hand, pushing, reaching above shoulder, repetitive motion, sitting, standing, walking, visual requirement (able to see screens, detect color coding, read fine print), hearing requirement, grasping, kneeling. Mental Requirements: Include but are not limited to: Ability to: understand, remember and apply oral and/or written instructions or other information, understand complex problems and collaborate/explore alternative solutions, organize thoughts and ideas into understandable terminology, organize and prioritize work schedule on a short-term basis, make decisions which have moderate impact on the immediate work unit and monitor impact outside this area, understand and follow basic instructions and guidelines, complete routine forms, compose letters, outlines, memoranda and basic reports and communicate with individuals via telephone. Information For Applicants: Applications can be submitted via our online recruiting system only. We appreciate your interest in working with us; however, only those applicants selected for interviews will be contacted. Final candidates for this position may be required to undergo a security screening, including a criminal records check. To learn more about us, visit **************** At Enbridge, we are dedicated to our core value of Inclusion. We are proud to be an Equal Opportunity Employer. We are committed to providing employment opportunities to all qualified individuals, without regard to age, race, color, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, marital status, family status, veteran status, Indigenous status, disability, or any other reason protected by federal, state, or local law. Applicants with disabilities can request accessible formats, communication supports, or other accessibility assistance by contacting ********************. Information For Applicants: Applications can be submitted via our online recruiting system only. We appreciate your interest in working with us; however, only those applicants selected for interviews will be contacted. Final candidates for this position may be required to undergo a security screening, including a criminal records check. To learn more about us, visit ****************

* Conduct preventive maintenance by inspecting, lubricating, replacing and/or adjusting equipment and components. * Completes reports and records of repair and maintenance activities, work orders and inspections * Completes reports and records of repair and maintenance activities, work orders and inspections * Installs new installations in compliance with acceptable electrical practices and in compliance with the respective regulations as directed. * Able to read and interpret electrical and hydraulic schematics. * Process the ability to communicate well verbally and in writing. * Familiar with the job procedures necessary to complete task in a safe manner. * Should be able to cut and weld. * Familiar with the machinery and equipment's function and operation. * Perform other duties as required