Industrial electrician jobs in Illinois

The electrician technician will handle troubleshooting and repairs to keep equipment running and minimize downtime while supporting all other members of the maintenance group with any other repairs, projects, etc. deemed necessary by the department manager. Proficient with electrical troubleshooting and repairs. Test and replace fuses. Test and replace solenoids. Test and replace contactors / relays. Test and replace proximity / limit switches. Reset and replace breakers / motor starters. Adjust and replace photo eyes. Able to make conduit runs, wire pulls, and wire terminations. Proficient in performing pneumatic and hydraulic system repairs. Proficient working with single phase / 3 phase / 110V, 240V, 277V, 480V, and 24V control systems. Able to work with Voltmeter/Amp Meter to troubleshoot electrical systems. Proficient reading schematics/blueprints to troubleshoot electrical systems. Able to troubleshoot AC / DC control circuits. Able to troubleshoot motors and drives, then replace if needed. Proficient at troubleshooting PLC's and ladder logic. Able to cross reference and change out electrical devices with other brands. Able to troubleshoot by phone while communicating with other maintenance personnel or machine techs. Able to circumvent problems and find ways to keep machines running. Able to perform project work with little supervision. Able to communicate and problem solve with foreign and domestic techs by phone and online support. Perform electrical building maintenance. Assist with electrical PM as needed. Proficient with mechanical troubleshooting and repairs. Fluent with schematics and blueprints. 480V 3 phase wiring expertise. Comfortable working independently. In addition to the functions listed above, the employee is expected to: exercise honesty, integrity and respect with all clients and co-workers, maintain a professional appearance and demeanor, demonstrate a positive attitude, communicate effectively with co-workers and clients, work with accuracy, efficiency, and attention to detail, maintain good attendance by working when and where directed, work safely in compliance with all safety policies, respect the work environment and keep it as neat and clean as possible, and exercise initiative to learn new skills and tasks and to help co-workers when possible. The employee is also expected to perform such other duties and functions as required and assigned from time to time. Qualifications: High School Diploma/GED preferred. Good verbal and written communication skills with ability to communicate effectively with contractors, service techs (onsite/phone support), and fellow employees. Understands various aspects of an industrial facility including structural, electrical, plumbing systems, etc. Ability to work additional hours and weekends as necessary to meet business plan objectives. Proficiency in MS Excel & Word is a plus. Proficient with industrial trouble shooting skills. Proficient with various software and drives. Fluent with schematics and blueprints. 480V 3 phase wiring experience. Proficiency in MS Excel & Word is a plus Strong industrial trouble shooting skills. CNC background a plus. 4 years manufacturing experience preferred. Demonstration of minimum proficiency with the English language in order to ensure effective new hire training and on-going communications about safety and quality issues. Machines/Tools/Equipment: Voltmeter, conduit benders, assortment of hand and small power tools, computer, basic office equipment, tow motor, etc. Salary-$35-$45 depending on experience. Safety: Employees are expected to follow all facility safety guidelines that include adhering to GMP (Good Manufacturing Practices) and Food Safety as outlined during their training. Working Conditions: Manufacturing environment working around machinery, moving equipment, and loud noise (hearing protection required) Environment is not climate-controlled and there is exposure to a wide range of temperatures (temperature varies depending on work/machine location and ranges from 50 degree F to 100 degree F). Possibility of outside work in all types of weather conditions (including heat, cold, rain, and snow). The proposed salary range for this position is $35-$45 per hour depending on experience. WE ARE AN EQUAL OPPORTUNITY EMPLOYER. We strive to create and maintain an inclusive and diverse workforce where everyone feels valued, respected, and included. We consider applicants for all positions without regard to age, race, color, religion, creed, sex, national origin, disability, sexual orientation, citizenship, veteran status, gender identity or any other legally protected status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a job.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employee's job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employee's job specialty. Maintains in-depth technical knowledge of numerous systems as the employee's job specialty requires. Performs research and procedures as the employee's job specialty requires. · Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. · Independently performs maintenance as per industry standards. · Complies with 5S and housekeeping standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. · Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. · Updates records and reviews CMMS history and analyzes data. · Provides technical contents of sales quotations and performs T&M duties as required. · Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. · Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use hand tools and specialized tools as appropriate. · May be required to travel. · Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$100,556.65-$128,603.05 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Electrical Maintenance Technician - Manufacturing to join their team. This is a fantastic opportunity for someone who is passionate about electrical systems, troubleshooting, and continuous improvement. Key Responsibilities: Diagnose, repair, and maintain electrical systems, including PLCs, HMIs, MCCs, motors, drives, and control panels. Perform preventive and predictive maintenance to ensure maximum equipment uptime. Read and interpret electrical schematics, blueprints, and technical diagrams. Install, test, and service wiring, equipment, and fixtures in compliance with OSHA, NFPA 70E, and Lockout/Tagout (LOTO) safety standards. Document maintenance activities and support inventory management. Collaborate with cross-functional teams to resolve technical issues and drive process improvements. Qualifications and Skills: High School Diploma. Journeyman Electrician License preferred. Minimum 3 years of experience in electrical maintenance within a manufacturing environment. Strong troubleshooting skills with PLCs, HMIs, MCCs, and industrial power distribution. Working knowledge of OSHA, NFPA 70E, and LOTO programs. Ability to read and interpret electrical schematics and technical documentation. Experience in food manufacturing or a related industry. Technical or vocational training in industrial electricity. Ability to work both in office and on the plant floor, including standing, walking, and occasional lifting (up to 50 lbs). Compensation Range: $34.00/hr - $38.00/hr Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Electrical Maintenance Technician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! $5000 Hiring Bonus At Charter Dura-Bar, our Maintenance team is the backbone of our operations, keeping everything running smoothly. They tackle a variety of challenges, from installing and maintaining equipment to troubleshooting complex problems and executing preventive maintenance plans. Join our Skilled Trades Team and elevate your talents. POSITION PURPOSE/MISSION: In the electrical maintenance role you will Install, maintain, troubleshoot, and repair all electrical systems of the plant in accordance with codes, regulations, and specifications, ensuring minimum down time of the plant operations, in accordance with company policies and procedures. Support maximizing facility uptime through execution of rolling equipment setups. PHYSICAL REQUIREMENTS: Constant standing. Frequent lifting up to 10 lbs. Occasional carrying, lifting to 60 lbs, hand use, pushing/pulling, reaching, sitting, below waist level work, complex neck/spinal motion, and walking. Minimal climbing, foot use, and lifting up to 120 lbs. Ability to meet the physical requirements, with or without reasonable accommodation, as provided in detail in the Job Analysis Database MINIMUM QUALIFICATIONS : High School Diploma or GED. Accredited maintenance apprenticeship or two years technical training with two plus years' industrial electrician experience. Five plus years' industrial electrician experience or equivalent combination of education and experience Demonstrated ability to read and interpret documents such as wiring diagrams, schematic drawings, instructions, safety rules, code books, and specifications. Demonstrated ability to inspect electrical systems, equipment, and machines for possible problems. Knowledge of medium voltage power distribution systems. Knowledge of drives, controls, motion controllers, PLCs, and/or motors. Understanding of national electric code (NEC) and NFPA-70E. Ability to operate mobile equipment such as forklifts, overhead traveling cranes, and aerial lift platforms in a safe and professional manner. Ability to use math skills including fractions, percentages, geometry, and probability. Ability to read and understand technical procedures Good verbal and written communication skills. Ability to follow and give instructions. Ability to work well with other employees. Proficient in basic computer skills. Knowledge of lockout/tagout procedures. PREFERRED QUALIFICATIONS: Knowledge of silicon-controlled rectifiers (SCR), rectifiers, capacitors, and resistors. Advanced knowledge of PLC programming (Allen Bradley, Siemen, GE, etc.) Advanced knowledge of operation of SCRs, rectifiers, capacitors, and resistors. Advanced knowledge of Proportional Integral Derivative (PID) troubleshooting experience. Machine tool, forklift truck, and crane experience. Advanced knowledge and aptitude on hydraulic, pneumatic, combustion, machining, and mechanical systems. Troubleshooting experience with automated systems (material handling, machine tools, and metal casting equipment) Work experience in a foundry environment. MAJOR ACCOUNTABILITIES: Perform advanced problem solving by identifying, troubleshooting, and correcting electrical issues. Perform a wide variety of installation, maintenance, and troubleshooting work to keep production and support equipment in operating condition. Act as subject matter expert for electrical systems. Analyze test results, machine error messages, and information obtained from operators to diagnose and repair. May perform ARC flash program. Layout control panels using schematics and I/O mapping. Perform a wide variety of electrical installation, maintenance, and troubleshooting work to keep production and support equipment in operating conditions. Plan, layout, and install complex wiring circuits and distribution centers in conformance with established electrical codes; plan, measure, bend, and fir conduit. Install and troubleshoot motor control centers, power distribution panels, lighting panels, and controls on plant equipment such as bar pulling machines, cut off equipment, centerless grinders, trepanning lathes, dust collectors, melting and holding furnaces, and other similar types of equipment. Repair, replace, and connect single or three-phase motors AC or DC, on all types of production and support equipment. Maintain and replace starter, contactors, relays, timers, limit switches, and counters. Use material handling equipment when performing certain electrical maintenance work; operate a forklift truck for transporting equipment and lifting employees; use specialized power equipment for pulling cable and wire. Use multimeters and other test instruments when troubleshooting electrical circuits; interpret resistance, voltage and amperage readings to arrive at the solution to electrical problems; use instrumentation built into equipment to diagnose certain malfunctions. Proceed independently when installing or troubleshooting electrical equipment; obtain needed information form wiring diagrams, schematic drawings, and code books. Follow all plant safety rules; including lock out of all plant equipment so that it is safe to work on; use safety equipment appropriate for the job; be aware of the safety of others. Follow Environmental, Quality and Safety Management System procedures and requirements. Ability to meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description. The entry hourly rate for this position is $35.25 per hour. The actual base pay offered to the successful candidate will depend on various factors, including but not limited to job-related skills, experience, and qualifications. Compensation decisions are tailored to the unique circumstances of each position and candidate.We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

* The starting hourly wage for this role is $36.09/hr to $36.09/hr. * Shift Premium of $.75/hr on 2nd shift & $1.00/hr on 3rd shift. * Hourly Bonus Program Responsibilities: * Perform maintenance and repairs on all electrical systems including motors, generators, switches, lights, etc. * Assist other departments by providing technical assistance to solve complex problems. * Work closely with others to complete daily tasks. * Ensure safe working conditions by complying with safety regulations and wearing proper protective gear. * Maintain accurate records of work performed. * Troubleshoot and fix electrical issues promptly. * Monitor and adjust voltage levels as needed. * Use hand tools and power tools safely. Qualifications: * High school diploma or equivalent required. Associates degree preferred. * Minimum of 1 year experience in industrial electrician trade. * Ability to read blueprints and schematics. * Knowledgeable in troubleshooting and repairing electrical systems. * Excellent problem-solving skills and ability to multitask. * Strong organizational skills and attention to detail. * Good written and verbal communication skills. * Physically able to lift up to 50 pounds and move around the plant. * Able to work overtime when necessary. Benefits: Coverage for employees (and their eligible dependents) through affordable access to healthcare, protection, and saving for the future, we offer plans tailored to meet you and your family's needs. Coverage for benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. Wellbeing: We offer events, resources, and learning opportunities that inspire a physical, social, emotional, and financial well-being lifestyle for our employees and their families. You'll be able to participate in a variety of benefits and wellbeing programs that may vary by role, country, region, union status, and other employment status factors, for example: * Physical - Medical, Prescription Drug, Dental, Vision, Screenings/Assessments * Social - Paid Time Off, Company Holidays, Leave of Absence, Recognition, Training * Emotional - Employee Assistance Program , Wellbeing Programs, Family Support Programs * Financial - 401k, Life, Accidental Death & Dismemberment, Disability Location(s) Champaign Plant Kraft Heinz is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact ***********************.

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Caterpillar has exciting opportunity for an Electrician at our East Peoria, IL (Undercarriage Building BB) facility! Pay starts at **$35.81 plus $1.00** **per hour shift differential** (for 3rd shift). This full-time position offers benefits including health insurance, paid time off, paid holidays, 401K etc. As an Electrician, you will be responsible building, installing and repairing electrical and electronic circuits used on machine tools and plant equipment. While applying your knowledge the operations of electrical units and systems, you will test and diagnose malfunctions. **Job** **Duties/Responsibilities** may include, but are not limited to: * Build, install, repair electrical and electronic circuits used on machine tools and plant equipment * Apply knowledge of operation of electronic circuits to locate defects using instruments * Test faulty equipment * Apply knowledge of operation of electronic units and systems to diagnose malfunctions * Utilize oscilloscopes, signal generators, electronic counter, recorders, etc. * Calibrate and service electronic testing instruments * Electrically troubleshoot and repair complex machine tools and related equipment * Troubleshoot and repair relay logic machines and CNC/PLC controlled machines * Support electrical aspects of new equipment installation **Required Qualifications** * Demonstrate comprehension of oral instructions and/or printed work orders to determine work assignments and material and equipment needs * Satisfactorily demonstrate proficiency in electrical and electronic theory and application relating to plant operations and equipment * Demonstrate an intermediate working knowledge of interpreting schematics and electrical diagrams * Possess three years of experience, or demonstrate the equivalent, before performing intermediate tasks on electrical and electronic machinery and equipment * Obtain two years of experience, or demonstrate the equivalent, before performing basic mechanical installation or repair to equipment **Desired Qualifications** * Conduit bending experience **What to Expect After Applying** : *Applicants that meet the qualifications will receive a call from our talent acquisition team to talk through your qualifications and answer questions you may have. *Applicants that have passed the phone screen will be sent an online assessment that can be taken from your phone or computer. *On-site interviews will be scheduled for candidates that pass the phone screen and the online assessment. *Ramsay testing is required for this role **Additional Information:** - This position does not offer relocation - This position requires no travel - Candidates must be at least 18 years of age - 3rd shift position, 11:00pm - 7:00am Sunday - Thursday **What we offer:** - Competitive starting wages - Scheduled wage increases - Health, dental and vision insurance available on day one - Employee national discounts - Development opportunities - Paid time off and holidays - 401(k) Safety is a core value at Caterpillar. We owe it to our employees and families to work in a safe and secure workplace. All candidates for employment must successfully pass a pre-employment drug screen. **Summary Pay Range:** $0.00 - $0.00 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees **Posting Dates:** November 21, 2025 - December 18, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

ELECTRICIAN The Industrial Electrician is responsible for the safe, efficient, and effective operation of equipment in VVF's operations. Basic Minimum Requirements: Must have five (5) years on-the-job experience as an industrial electrician. Experience in electrical troubleshooting, and installing and repairing pneumatic/electrical instrumentation, power distribution, and control/power wiring. Ability to read and interpret electrical schematics, and national electrical code. Experience working with AC/DC drives and motors, PLC's, sensors, and control devices. Experience with various Servo/Stepper/Custom drives systems as used on existing equipment. (Kinetics/Sercos/Lexium/Emerson Servos, Parker Stepper Drives, etc.) Experience with ethernet/RS232/RS485/Modbus+/DeviceNet communications to various equipment types in order to troubleshoot, diagnose, program and repair malfunctions. Experience working with mechanical components and systems, (motor, gearbox, bearing, driveshaft, sprockets, roller chains, etc.) Must have basic standard and metric hand tools (e.g. sockets, wrenches, pliers, channel locks, wire cutters). Ability to operate shop equipment: grinders, belt sanders, drill press, band saws, hydraulic press, electric drills, etc. Ability to work any shift, and overtime as required. Preferred Qualifications: Basic knowledge of a Computerized Maintenance Management System (CMMS). Ability to read and interpret drawings, hydraulic schematics and technical manuals. Ability to work with Production Personnel to implement minor operational changes in the various Control Systems through hardwiring and PLC programming. Ability to use the Internet to obtain manuals, information and remote support if required. Ability to program PLC's. Experience working with, and troubleshooting Programmable Logic Controllers (PLC's) (AB SLC500-ControlLogix/TI-505/Modicon Quantum-984). Experience working with Hydraulic Systems, Cylinders, Pumps, Valves, etc. Experience working with piping. Experience rebuilding and overhauling packaging equipment. Physical Requirements: Requires sufficient physical ability to walk, stand, sit, and climb stairs; to frequently bend, squat, crouch, kneel, twist, and make other movements in the performance of daily activities; grasping, handling/fingering and using hand tools; to reach above shoulders and outward, and lift, carry, push and/or pull moderate amounts of weight. Work is performed in an internal and external plant environment; confined space entry required; exposure to noise, dust, and odors; all types of weather and temperature conditions; frequently at heights. Key Responsibilities: Coordinates troubleshooting and correction procedure documentation for all electrical items and issues where possible. Includes updates of existing procedures and development of new procedures. Follows NEC and NFPA 70E electrical standards and takes corrective action with engineering on any systems that are found to be in violation of these standards. Assists in remote troubleshooting when VVF engineering assistance is required. Coordinates and verifies that proper documentation is provided in all completed work orders that detail the issue reported and the electrical troubleshooting and repair steps taken to correct them. Performs a wide variety of service work in one or more specialized maintenance area such as mechanical, electrical, hydraulics, or machine servicing. Installs new machines by installing conduit, wire and electrical equipment; using hand tools and test equipment. Repairs electrical systems and equipment by diagnosing malfunctioning electrical devices, determining faulty wiring; inspecting and testing. Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Performs general manual labor work. Performs all duties in a safe manner, utilizing safety practices and procedures required by VVF and applicable law (e.g. OSHA, etc.), personal protective equipment, and reporting procedures. Reviews all pertinent safety material before conducting new assignments. Monitors for, and reports unusual occurrences to management. Maintains all equipment and facilities in a clean, orderly and operating condition. Trains other employees as required. Completes work orders as required. Performs other duties and responsibilities as assigned by management. No task or duty is exclusive to a classification or skillset. An employee working in this classification is expected to perform various duties and tasks that traditionally may not have been assigned under a narrower job classification. Note: The above statements shall not be construed as a complete description of all the work requirements. VVF is an equal opportunity employer. We evaluate qualified applicants, without regard to race, color, religion, national origin, sex or gender, age, disability, veteran status, sexual orientation, gender identity or expression, genetic information, including the perception that a person has any of those characteristics or that the person is associated with a person who has, or is perceived to have, any of those characteristics, or any other consideration made unlawful by applicable law. VVF is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call Human Resources at ************** and let us know the nature of your request and your contact information.

Experience in a wide range of maintenance preferred. Preventative maintenance, mechanical, hydraulic, & electrical troubleshooting. JOB TITLE DEFINITION * Review & understand permissibility requirements / monthly electrical examinations/ records * Proper splicing & troubleshooting for high/medium voltage * Service all electrical motors/equipment * Read electrical prints for equipment / MCC * Maintain/Calibrate level controllers * Follow up repairs from thermography testing * Check and maintain weekly electrical tools/maintain records * Maintain CO monitor * Troubleshoot & install fiber optic cables / PLC racks * Fire suppression testing MCC * Maintain density gauges and calibration * Trouble shoot and maintain VFD Controllers * Grease all appropriate components * Other duties as needed

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Plans layout and installs wiring, conduit and electrical equipment in buildings. Measures, cuts, bends, threads, assembles and installs electrical conduit. Troubleshoots Dematic conveying and ASRS systems. Supports project planning and equipment purchases. Installs power supply wiring and conduit for newly installed machines and equipment. Installs distribution and control devices such as circuit-breaker panels, switches, relays, etc. Uses electrical drawings and wiring diagrams and manufacturer instructions to diagnose malfunctioning devices such as transformers, motors and lighting fixtures and replaces damaged or broken components of building installations. Uses electrical drawings and wiring diagrams and manufacturer instructions to test malfunctioning machinery. Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards and faulty electrical components of machines such as relays, switches and motors, and positions sensing devices. Communicates with equipment manufacturer as needed. Supports maintenance in diagnosing and repairing faulty mechanical, hydraulic, and pneumatic components of machines and equipment. Serves as an electrical SME and ensures plant electrical activities are in compliance with all applicable electrical codes. Completes paperwork as required. Initiates purchase order requests for parts and supplies. In addition to Electrical, works on other aspects of engineering project installations including mechanical, pneumatic, hydraulic, etc. Supports the Facilities Maintenance team as needed. Completes other maintenance repair work as required and works in areas such as building maintenance. Actively participates in root cause analysis and other plant continuous improvement initiatives. Works closely with supervisors and cross-functional teams to identify trends and areas of improvement and implement and sustain continuous improvement initiatives that enhance safety, quality, equipment performance, and efficiency. Complies with safety and GMP requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP's, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); at least 10 years related electrical maintenance or electrician experience and/or training; or equivalent combination of education and experience. Electrical trade school/certification strongly preferred. Knowledge of AC power from 480 volts to 120 volts and DC power 12 to 24 required. Knowledge of control systems preferred. PERFORMANCE ABILITY Proven ability to Install and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment of a complex nature. Demonstrated ability to consistently meet quality, safety and efficiency goals. Excellent problem-solving skills required. Good time management skills; ability to prioritize and calmly handle multiple tasks simultaneously in a fast-paced environment; demonstrate a strong sense of urgency; and flexibility to change tasks frequently and work in different areas of Maintenance and locations as business needs require. Strong teamwork and collaboration skills; ability to work and communicate effectively with others; strong attention to detail skills; excellent organizational skills; strong initiative to independently complete tasks accurately and on time; and demonstrated high quality of work. Consistently follows all company policies and procedures, including all safety policies and procedures. LANGUAGE SKILLS Ability to communicate professionally and effectively both verbally and in writing. Ability to read and comprehend instructions, correspondence, and memos such as safety rules, operating and maintenance instructions, and procedure manuals (S.O.P.). Ability to accurately and truthfully complete paperwork. Good communication and interpersonal skills. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Excellent problem-solving ability. OTHER SKILLS and ABILITES Basic computer skills required. Flexibility to work in other areas of Maintenance (i.e. Building maintenance) and at other locations (i.e. BLM 391, Roselle, Knollwood/Scott Drive Corporate) to support business needs. Ability to work off shifts and weekends and to travel to other facilities required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms (including overhead), including reaching horizontally on a ladder; ascend and/or descend stairs (including ladders); stoop, kneel (including half kneel), crouch, and crawl; and talk and hear. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: Lift up to 60 lbs. from 31-inch shelf and carry for up to 5 ft. and then return 60 lbs. to 31-inch surface. Lift up to 60 lbs. floor to waist height. Push and pull 42 lb. force at 36 inches. Step on/off a 24-inch step. Grasp 50 lbs. of force. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to herbal aromas, dust, and/or airborne particles, some classified as allergens or irritants. The employee occasionally works in high, precarious places and in outside weather conditions and is occasionally exposed to fumes, cold, and heat. This position works in all areas of NOW's manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes (powders and liquids), equipment, and packaging. The noise level in the work environment is usually moderately loud, and in some areas where louder hearing protection is required. 2025 BENEFITS AT A GLANCE

SCHEDULE The Maintenance Tech Specialist will work from 6:30 am to 3:00 pm, in addition to being scheduled on call for emergencies. DETAILS Big River Resources in Galva, Illinois is looking to hire a full time Maintenance Tech Specialist to join our team. If you are eager to learn in a fast paced industry, have a positive outlook, want to be a team player, and are looking for a family friendly and employee appreciated company, keep reading! Big River Resources offers a clean, safe and competitive employment opportunity. We strive to offer all employees a work to life balance and a family atmosphere where employees are treated with respect and appreciation. Big River also offers a competitive benefit package that includes low deductible and low premium health insurance, PTO available on day 1, discretionary annual cash incentives and profit sharing, company paid family dental coverage, and much more! The Maintenance Tech Specialist plays a vital role in the ongoing production of the Big River Resources facility. As the Maintenance Tech Specialist, you will be involved and need to understand all phases of the maintenance department and work with the team to minimize downtime and maximize production. The current maintenance team is welcoming, hard working, and eager to keep the facility producing to the best of their ability. This position will challenge you to use your mind creatively to achieve the desired outcome of the task. You will learn the importance of a team setting and the gratifying challenge of industrial ethanol facility maintenance. If this Maintenance Tech Specialist position sounds exciting, make sure to apply today using our quick application. Drive into the future with Big River Resources creating a cleaner burning fuel! Any offers of employment will be contingent on the successful completion of a physical, drug screen and background check.

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. The Instrument/ Electrician Technician duties will vary but include troubleshooting and repairs of electric, electronic and control circuitry, programmable logic controllers, AC and DC motors, breakers (120v 1-phase to 4160v 3-phase), transformers, power supplies, fiber optics, generators, plant lighting, plant telephone and paging systems, and HVAC equipment. The successful candidate shall be able to perform process instrumentation calibration and repair, interpret drawings and instruction manuals and perform rigging as necessary to move, lift and position heavy equipment. This position requires excellent troubleshooting skills as well as the ability to communicate information in a clear and concise manner. This position requires the use of manual, pneumatic, hydraulic and electrical tools and test equipment as well as the ability to operate motorized lift trucks and overhead cranes. This role will pay this role pays between $39.35 to $51.59 per hour depending upon experience. Role is also eligible for Medical, dental, and vision insurance for the employee and their eligible dependents. Job Description The Instrument / Electrical Technician reports to the Maintenance Supervisor and/or Operations Supervisor and is responsible for installing, troubleshooting, repairing and maintaining all process instruments, controls, computers, PLCs and electrical systems at the Baldwin Power Plant. Responsibilities: Troubleshoots and repairs of electric, electronic and control circuitry, programmable logic controllers, AC and DC motors, breakers (120v 1-phase to 4160v 3-phase), transformers, power supplies, fiber optics, generators, plant lighting, plant telephone and paging systems, and HVAC equipment Perform process instrumentation calibration and repair Interpret drawings and instruction manuals and perform rigging as necessary to move Lift, operate, and position heavy equipment Perform other tasks as assigned Required Qualifications: Associate degree in Electronic Engineering Technology or equivalent completion of an approved apprenticeship program 48 months experience in instrument and electrical maintenance in a power plant or heavy industry (Power Plant experience preferred) Possess a working knowledge of mathematics and physics Must provide documentation to support their instrument and electrical experience Possess patience and ability to exercise care when working with small and precision parts Must possess basic computer skills needed to perform job functions as needed in a computer-based maintenance system. Ability to climb ladders, lift and carry heavy loads Ability to work in areas involving heights, enclosed spaces, and near or above water Must be available and willing to work overtime, and ability to work 12 hour shift work. This position requires to work either the 12-hour shift or straight day 8 hour shift. Must successfully complete/pass POSS/MASS aptitude test *Must be clean shaven at all times while on duty. Job Family Plant Operations Company Dynegy Midwest Generation, LLC Locations Baldwin, IllinoisIllinois We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today! If you currently work for Vistra or its subsidiaries, please apply via the internal career site. It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws. If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.

* Right across infrastructure, there's a requirement to not only maintain, but also renew and reimagine.Whatever stage you're at in your career, with us you'll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? MEICA and capital maintenance - Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. What will you be doing? You'll be responsible for the delivery of preventative maintenance of electrical systems, controls and instrumentation. You'll perform reactive and corrective maintenance, fault finding, and repairs. You'll replace and calibrating instruments, installing new systems and equipment, and commissioning, all in line with BS7671 18th Edition standards. You'll ensure compliance with The Health and Safety at Work Act 1974 You'll adhere to industry, British, International, and customer standards, as well as M Group Policies, Procedures, and Safe Systems of Work. You'll be working across various sites, utilising your Z-Tech van and company fuel card. What you'll bring * You'll have successfully completed ONC/HNC in engineering (or equivalent), NVQ, or C&G Level 3 Electrical 18th Edition qualification * You'll have industrial experience * You'll have instrumentation and telemetry connection experience * You'll have demonstrated commitment to safety and adherence to safety protocols. * You'll have a valid driver's licence What's in it for you? In addition, this role offers; * Company van/vehicle and fuel card for business use * 25 days annual leave plus bank holidays * Recommend a friend - get rewarded for introducing people to us! * Matched or contributory pension scheme * Employee Assistance Programme * My Rewards portal, access to 1000's of retail discounts * Life assurance * Cycle to work scheme About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. * We're responsible and go further for our people, clients, communities and the planet * We're open and seek new and better ways of exceeding expectations * We're together and as one team; the whole is greater than the sum of the parts * We're ambitious and embrace opportunity, to lead essential infrastructure services for life Whether you're a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. It's an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupW INDREG * Not Specified

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! ***$5000 Hiring Bonus*** At Charter Dura-Bar, our Maintenance team is the backbone of our operations, keeping everything running smoothly. They tackle a variety of challenges, from installing and maintaining equipment to troubleshooting complex problems and executing preventive maintenance plans. Join our Skilled Trades Team and elevate your talents. POSITION PURPOSE/MISSION: In the electrical maintenance role you will Install, maintain, troubleshoot, and repair all electrical systems of the plant in accordance with codes, regulations, and specifications, ensuring minimum down time of the plant operations, in accordance with company policies and procedures. Support maximizing facility uptime through execution of rolling equipment setups. PHYSICAL REQUIREMENTS: Constant standing. Frequent lifting up to 10 lbs. Occasional carrying, lifting to 60 lbs, hand use, pushing/pulling, reaching, sitting, below waist level work, complex neck/spinal motion, and walking. Minimal climbing, foot use, and lifting up to 120 lbs. Ability to meet the physical requirements, with or without reasonable accommodation, as provided in detail in the Job Analysis Database MINIMUM QUALIFICATIONS: High School Diploma or GED. Accredited maintenance apprenticeship or two years technical training with two plus years' industrial electrician experience. Five plus years' industrial electrician experience or equivalent combination of education and experience Demonstrated ability to read and interpret documents such as wiring diagrams, schematic drawings, instructions, safety rules, code books, and specifications. Demonstrated ability to inspect electrical systems, equipment, and machines for possible problems. Knowledge of medium voltage power distribution systems. Knowledge of drives, controls, motion controllers, PLCs, and/or motors. Understanding of national electric code (NEC) and NFPA-70E. Ability to operate mobile equipment such as forklifts, overhead traveling cranes, and aerial lift platforms in a safe and professional manner. Ability to use math skills including fractions, percentages, geometry, and probability. Ability to read and understand technical procedures Good verbal and written communication skills. Ability to follow and give instructions. Ability to work well with other employees. Proficient in basic computer skills. Knowledge of lockout/tagout procedures. PREFERRED QUALIFICATIONS: Knowledge of silicon-controlled rectifiers (SCR), rectifiers, capacitors, and resistors. Advanced knowledge of PLC programming (Allen Bradley, Siemen, GE, etc.) Advanced knowledge of operation of SCRs, rectifiers, capacitors, and resistors. Advanced knowledge of Proportional Integral Derivative (PID) troubleshooting experience. Machine tool, forklift truck, and crane experience. Advanced knowledge and aptitude on hydraulic, pneumatic, combustion, machining, and mechanical systems. Troubleshooting experience with automated systems (material handling, machine tools, and metal casting equipment) Work experience in a foundry environment. MAJOR ACCOUNTABILITIES: Perform advanced problem solving by identifying, troubleshooting, and correcting electrical issues. Perform a wide variety of installation, maintenance, and troubleshooting work to keep production and support equipment in operating condition. Act as subject matter expert for electrical systems. Analyze test results, machine error messages, and information obtained from operators to diagnose and repair. May perform ARC flash program. Layout control panels using schematics and I/O mapping. Perform a wide variety of electrical installation, maintenance, and troubleshooting work to keep production and support equipment in operating conditions. Plan, layout, and install complex wiring circuits and distribution centers in conformance with established electrical codes; plan, measure, bend, and fir conduit. Install and troubleshoot motor control centers, power distribution panels, lighting panels, and controls on plant equipment such as bar pulling machines, cut off equipment, centerless grinders, trepanning lathes, dust collectors, melting and holding furnaces, and other similar types of equipment. Repair, replace, and connect single or three-phase motors AC or DC, on all types of production and support equipment. Maintain and replace starter, contactors, relays, timers, limit switches, and counters. Use material handling equipment when performing certain electrical maintenance work; operate a forklift truck for transporting equipment and lifting employees; use specialized power equipment for pulling cable and wire. Use multimeters and other test instruments when troubleshooting electrical circuits; interpret resistance, voltage and amperage readings to arrive at the solution to electrical problems; use instrumentation built into equipment to diagnose certain malfunctions. Proceed independently when installing or troubleshooting electrical equipment; obtain needed information form wiring diagrams, schematic drawings, and code books. Follow all plant safety rules; including lock out of all plant equipment so that it is safe to work on; use safety equipment appropriate for the job; be aware of the safety of others. Follow Environmental, Quality and Safety Management System procedures and requirements. Ability to meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description. #LI-Onsite #LI-ME1 The entry hourly rate for this position is $35.25 per hour. The actual base pay offered to the successful candidate will depend on various factors, including but not limited to job-related skills, experience, and qualifications. Compensation decisions are tailored to the unique circumstances of each position and candidate.We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Electrical Technician - Food Manufacturing to join their team. This is a unique opportunity to work with cutting-edge technology in a fast-paced, growth-oriented environment. Key Responsibilities: Provide expert electrical and PLC programming support for troubleshooting, repairs, and new equipment installations. Connect to, read, and edit PLC logic-Allen Bradley (RSLogix 500 & Studio 5000). Collaborate with cross-functional teams, including management, maintenance, and OEM technical service, to ensure seamless equipment operation. Diagnose and resolve issues with 480V electrical systems, VFDs, HMIs, and analog sensors. Utilize FactoryTalk View Studio for HMI programming and troubleshooting. Interpret work orders, blueprints, diagrams, and equipment manuals to execute tasks efficiently. Uphold strict safety standards, including Lock-out Tag-out and GMPs. Qualifications and Skills: High School Diploma required; technical certifications or an electrical degree are advantageous. 10+ years of hands-on electrical experience with industrial equipment. Background in food manufacturing or similar regulated environments. Familiarity with packaging, palletizing, and fluid process equipment. At least 3 years of direct experience with PLC programming and troubleshooting. Proficiency with Allen Bradley PLCs (RSLogix 500 & Studio 5000); familiarity with Schneider PLCs is a plus. Strong background in 480V electrical systems, VFDs, HMIs, and analog sensor technology. Experience with FactoryTalk View Studio. Ability to work independently and as part of a team, with excellent communication skills. Compensation Range: $40/hr-$42/hr + Overtime Overtime: Potential to work 5-10 hours of overtime per week Shifts: 1st shift and 2nd shift available Benefits Offered: 1 week of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Electrical Technician looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

Crown CAPP is seeking an experienced Industrial Electrician. This position will troubleshoot, repair, replace, maintain electrical/ systems for production related equipment and building utilities within a high-speed metal packaging manufacturing facility. This is an hourly position in high-speed, high-volume manufacturing environment where compliance to all safety policies, procedures and regulations is our way of doing business. We are looking for team-oriented individuals who are committed to customer quality, continuous improvement and achieving World Class Performance. Hourly Rate: $40.00/hr Primary Hours/Shift: 3rd Shift (10:00pm - 6:30am) Day to day responsibilities will include the following: Perform preventive maintenance inspections on production equipment as needed and assigned Assist in developing related preventive maintenance that do not currently exist. Troubleshoot of circuits as required to repair, adjust, calibrate, replace, modify electrical components and devices of production equipment. Knowledge of the requirements and use of Lockout Tagout. Knowledgeable of and conform to the requirements of NFPA70E, Arc Flash. Other duties as assigned. Job requirements: The successful candidate will possess the following skills and knowledge: High School Diploma or GED required. 5+ years of experience as a Maintenance/Industrial electrician in a manufacturing environment highly preferred. Experience troubleshooting and repairing of high-speed manufacturing equipment. Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills Troubleshooting ability of AC/DC control circuits 120/240 VAC and 440 VAC single and three phase power circuits Knowledge of and ability to troubleshoot variable frequency drives, AB Power Flex 40, 525 & Control Techniques An understanding of ladder logic AB RS Logics 5, 500, & 5000 Knowledge of and ability to troubleshoot Programmable Logic Controllers (PLCs) - Allen Bradley PLC 5, SLC 500, Compact Logics Must be able to comprehend and comply with all OSHA and company safety and electrical regulations including Lock Out / Tag Out, and Arc Flash protection Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes Ability to read and understand manuals, prints and electrical schematics Good communication and basic computer skills Planning and organizing skills Physical requirements: Work from ladders, lifts, catwalks above floor level (4-10 feet); occasionally at ceiling height (20+ feet) Frequent standing, walking, climbing, reaching, bending, squatting, & reaching above shoulder level Pushing, pulling, and lifting requirements: 25+ pounds. Good Color vision Exposure to high levels of noise (hearing protection required in plant area)

The starting hourly wage for this role is $36.09/hr to $36.09/hr. Shift Premium of $.75/hr on 2nd shift & $1.00/hr on 3rd shift. Hourly Bonus Program Responsibilities: · Perform maintenance and repairs on all electrical systems including motors, generators, switches, lights, etc. · Assist other departments by providing technical assistance to solve complex problems. · Work closely with others to complete daily tasks. · Ensure safe working conditions by complying with safety regulations and wearing proper protective gear. · Maintain accurate records of work performed. · Troubleshoot and fix electrical issues promptly. · Monitor and adjust voltage levels as needed. · Use hand tools and power tools safely. Qualifications: · High school diploma or equivalent required. Associates degree preferred. · Minimum of 1 year experience in industrial electrician trade. · Ability to read blueprints and schematics. · Knowledgeable in troubleshooting and repairing electrical systems. · Excellent problem-solving skills and ability to multitask. · Strong organizational skills and attention to detail. · Good written and verbal communication skills. · Physically able to lift up to 50 pounds and move around the plant. · Able to work overtime when necessary. Benefits: Coverage for employees (and their eligible dependents) through affordable access to healthcare, protection, and saving for the future, we offer plans tailored to meet you and your family's needs. Coverage for benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. Wellbeing: We offer events, resources, and learning opportunities that inspire a physical, social, emotional, and financial well-being lifestyle for our employees and their families. You'll be able to participate in a variety of benefits and wellbeing programs that may vary by role, country, region, union status, and other employment status factors, for example: Physical - Medical, Prescription Drug, Dental, Vision, Screenings/Assessments Social - Paid Time Off, Company Holidays, Leave of Absence, Recognition, Training Emotional - Employee Assistance Program , Wellbeing Programs, Family Support Programs Financial - 401k, Life, Accidental Death & Dismemberment, Disability Location(s) Champaign Plant Kraft Heinz is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact ***********************.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Caterpillar has exciting opportunity for an Electrician at our Caterpillar Mapleton facility! Pay starts at $35.81 plus $1.00 per hour shift differential (for 2nd shift). This full-time position offers benefits including health insurance, paid time off, paid holidays, 401K etc. As an Electrician, you will be responsible building, installing and repairing electrical and electronic circuits used on machine tools and plant equipment. While applying your knowledge the operations of electrical units and systems, you will test and diagnose malfunctions. Job Duties/Responsibilities may include, but are not limited to: Build, install, repair electrical and electronic circuits used on machine tools and plant equipment Apply knowledge of operation of electronic circuits to locate defects using instruments Test faulty equipment Apply knowledge of operation of electronic units and systems to diagnose malfunctions Utilize oscilloscopes, signal generators, electronic counter, recorders, etc. Calibrate and service electronic testing instruments Electrically troubleshoot and repair complex machine tools and related equipment Troubleshoot and repair relay logic machines and CNC/PLC controlled machines Support electrical aspects of new equipment installation Required Qualifications: Demonstrate comprehension of oral instructions and/or printed work orders to determine work assignments and material and equipment needs Satisfactorily demonstrate proficiency in electrical and electronic theory and application relating to plant operations and equipment Demonstrate an intermediate working knowledge of interpreting schematics and electrical diagrams Possess three years of experience, or demonstrate the equivalent, before performing intermediate tasks on electrical and electronic machinery and equipment Obtain two years of experience, or demonstrate the equivalent, before performing basic mechanical installation or repair to equipment Desired Qualifications: Conduit bending experience What to Expect After Applying: Applicants that meet the qualifications will receive a call from our talent acquisition team to talk through your qualifications and answer questions you may have. Applicants that have passed the phone screen will be sent an online assessment that can be taken from your phone or computer. On-site interviews will be scheduled for candidates that pass the phone screen and the online assessment. Ramsay testing is required for this role Additional Information: This position does not offer relocation This position requires no travel Candidates must be at least 18 years of age 2nd shift position, 3:00pm -11:00pm Monday - Friday What we offer: Competitive starting wages Scheduled wage increases Health, dental and vision insurance available on day one Employee national discounts Development opportunities Paid time off and holidays 401(k) Safety is a core value at Caterpillar. We owe it to our employees and families to work in a safe and secure workplace. All candidates for employment must successfully pass a pre-employment drug screen. Summary Pay Range: $0.00 - $0.00 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Medical, dental, and vision benefits* Paid time off plan (Vacation, Holidays, Volunteer, etc.)* 401(k) savings plans* Health Savings Account (HSA)* Flexible Spending Accounts (FSAs)* Health Lifestyle Programs* Employee Assistance Program* Voluntary Benefits and Employee Discounts* Career Development* Incentive bonus* Disability benefits Life Insurance Parental leave Adoption benefits Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: December 9, 2025 - January 15, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job Description Experience in a wide range of maintenance preferred. Preventative maintenance, mechanical, hydraulic, & electrical troubleshooting. JOB TITLE DEFINITION Review & understand permissibility requirements / monthly electrical examinations/ records Proper splicing & troubleshooting for high/medium voltage Service all electrical motors/equipment Read electrical prints for equipment / MCC Maintain/Calibrate level controllers Follow up repairs from thermography testing Check and maintain weekly electrical tools/maintain records Maintain CO monitor Troubleshoot & install fiber optic cables / PLC racks Fire suppression testing MCC Maintain density gauges and calibration Trouble shoot and maintain VFD Controllers Grease all appropriate components Other duties as needed Requirements 2+ years of surface experience MSHA Certified Electrical Card holder & Illinois Electrical Certificate High/Medium Voltage Benefits Foresight Energy is an equal opportunity employer with excellent wage & benefit packages available that includes medical, dental, vision, & prescription benefits; life insurance, 401(k) plan, paid holidays, vacation, & much more.

Experience in a wide range of maintenance preferred. Preventative maintenance, mechanical, hydraulic, & electrical troubleshooting. JOB TITLE DEFINITION Review & understand permissibility requirements / monthly electrical examinations/ records Proper splicing & troubleshooting for high/medium voltage Service all electrical motors/equipment Read electrical prints for equipment / MCC Maintain/Calibrate level controllers Follow up repairs from thermography testing Check and maintain weekly electrical tools/maintain records Maintain CO monitor Troubleshoot & install fiber optic cables / PLC racks Fire suppression testing MCC Maintain density gauges and calibration Trouble shoot and maintain VFD Controllers Grease all appropriate components Other duties as needed Requirements 2+ years of surface experience MSHA Certified Electrical Card holder & Illinois Electrical Certificate High/Medium Voltage Benefits Foresight Energy is an equal opportunity employer with excellent wage & benefit packages available that includes medical, dental, vision, & prescription benefits; life insurance, 401(k) plan, paid holidays, vacation, & much more.