Industrial electrician jobs in Ohio - 515 jobs

Electrician Job Accountabilities This position is for 1st Shift - 7:00a - 3:00p. Employee will work 8 hours shifts, Monday through Friday, with weekend work for inspections, preventative maintenance, projects etc. Electricians are paid a base rate of $33.44/hour. Must be able to work overtime if necessary. The Maintenance Electrician maintains and enhances the electrical infrastructure of our coil coating factory in Toledo, Ohio. The position will perform preventative and corrective repairs, interpret blueprints, troubleshoot issues, uphold safety standards and keep detailed documentation. This is a hands-on position that will be required to support a variety of duties and responsibilities in this continuous operation. Duties And Responsibilities: Perform preventive and corrective maintenance on electrical systems for production machinery, conveyors, motors, and control panels. Diagnose and repair electrical issues on automated equipment, including PLCs, VFDs, and motor control circuits. Install and maintain wiring, conduit, circuit breakers, transformers, and other electrical components in compliance with NEC and OSHA standards. Read and interpret electrical schematics, blueprints, and equipment manuals to plan and execute repairs. Test electrical systems using meters and diagnostic tools to ensure proper functionality and safety. Collaborate with maintenance and production teams to minimize downtime and improve equipment reliability. Maintain accurate records of maintenance activities and report findings to supervisors. Respond to emergency breakdowns and support continuous production operations. Ability to work safely in a fast-paced manufacturing environment and comply with OSHA and NFPA 70E standards. Performs other job-related duties as required or assigned Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: High school diploma or equivalent; technical certification or completion of electrician apprenticeship preferred. Minimum 3-5 years of experience as an industrial or manufacturing electrician. Strong knowledge of electrical systems, motor controls, PLC troubleshooting, and industrial automation. Familiarity with CMMS (Computerized Maintenance Management Systems) for scheduling and documentation. Good analytical and problem-solving skills Fully comply with all company and plant safety practices and policies Must have experienced skills in troubleshooting, repair, overhaul, and operation of high speed production machinery. Ability to perform math functions and comprehend complex verbal and written instructions Pass pre-employment testing, (drug test, background check, mechanical aptitude testing) Offer competitive wages and a comprehensive benefits package that includes valuable health care, income protection and retirement benefits, as well as paid time off. Possible equivalent Military Job Titles: Building Electrician; Construction Electrician; Power Plant Electrician; Precision Instrument and Equipment Repairer; Ship Electrician; Communications Equipment Operator; Avionics Technician. Electronics Technician.

remote type Onsite time type Full time posted on Posted 7 Days Ago job requisition id J0049226 Job Family: Engineering : Job description Maintain, troubleshoot, and repair plastic extrusion lines. Re-programming machines and robots. experience with Fanuc Robots is a plus. Visually inspect, test, diagnose, and troubleshoot faulty equipment. Perform preventative maintenance on all plant equipment. Install new or repaired parts to keep machines running at a high standard. Read and interpret equipment manuals and schematic prints (electrical, pneumatic, and mechanical) to perform required maintenance and service. Work effectively and efficiently with production and senior leadership to solve problems. Working as a team player to reach consistent output goals Maintaining a safe workspace and commitment to following Hitachi Astemo's safety mission and standards. Our ideal candidate is: A driven team-player who is eager to learn. Two years of technical school training in Industrial Maintenance, Machine Repair, Automated Systems, or other similar skilled trades is desired, along with 2 or more years of verifiable work experience in related fields. Experience with PLCs, drives, and industrial controls is desired. Work schedule is 3rd shift working one weekend per month. First month of training will be on 1st shift Has a career-oriented mindset aiming to grow personally and professionally A High school graduate with strong computer and math skills A sound decision-maker and problem-solver who is ready to go above and beyond A strong understanding of our safety mission and its importance Job Type: Full-time Salary: $25.65 - $30.53 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Health insurance Life insurance Paid time off Referral program Retirement plan Vision insurance Experience level: 2 years 3 years Schedule: 8 hour shift Monday to Friday Night shift Overtime Weekend availability Work setting: In-person People with a criminal record are encouraged to apply Ability to commute/relocate: Sunbury, OH 43074: Reliably commute or planning to relocate before starting work (Required) Experience: Programmable logic controllers (Preferred) Mechanical knowledge (Preferred) Work Location: In person Equal Opportunity Employer (EOE) - Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender, identity, disability, protected veteran status and national origin. At Astemo, we're challenging the status quo with the power of diversity, inclusion, and collaboration. Our goal is to build an inclusive work environment that celebrates the differences of our employees. We want to ensure that every employee feels valued, respected and empowered. We don't just accept difference-we celebrate it, we support it, and we thrive on it for the benefit of our employees, our products, and our community. Astemo is proud to be an equal opportunity employer. If you need a reasonable accommodation to apply for a job at Astemo, please send the nature of the request and contact information to ************************* when applying for the position.

IS FOR LOCAL WORKFORCE IN THE COLUMBUS, OHIO AREA AND DOES NOT PAY PER DIEM. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year, having no signs of slowing down. Our company grew through challenging and interesting opportunities that placed us in ENR's (Engineering News-Record) top 50 electrical contractors nationwide! Join Ace Electric for a chance to work with a highly supportive and proficient team, as well as build your career with Ace University! We value the hard work of our employees, always striving to enhance skills and a positive employee workplace. Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Foreman will support the Superintendent or Project Manager in the oversight of the operations and field personnel responsible for the installation, additions, and/or repairs of electrical systems, conductors, and associated materials/equipment for the assigned job. The Foreman functions as a crew leader or team lead on Job Project tasks or on smaller jobs. Preferred Job Skills: Strong commercial and industrial electrical background. Bilingual in Spanish and English, preferred. Strong troubleshooting skills utilizing sophisticated test equipment (DMM, Megger, PQM, UCT, IR Camera, etc.). Strong knowledge of the National Electric Code (NEC). Ability to safely operate and maintain a specialized electrical service vehicle. Able to maintain professional appearance and conduct at all times. Able to demonstrate necessary computer and keyboard skills. OSHA 30 Hour, CPR, and First Aid trained. Ability to manage customer and company specific information and documentation in an organized manner. Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. Must be an effective and professional communicator, both written and verbally. Able to be on twenty-four hour call on a rotating basis, as needed. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Driver's License. Responsibilities: Responsible for leading and directing all field personnel involved in the assigned project or task. Responsible for the planning of the project or task in the most efficient and profitable manner. Ensure all materials are ordered and received in a timely manner to ensure compliance. Necessary to have and maintain certain personal tools as directed by leadership. Will read and comply with all guidelines provided in the Employee Handbook, Safety Manual, or Policy and Procedure Manual, and will require any field employees under their leadership to do the same. All other duties as assigned. Position Requirements: License: Valid state driver's license. Certification: None required. Education: High School Graduate/GED required. Experience: Minimum of 6 years electrical experience preferred. Working Conditions: Job requires working in all elements, depending on job location, time of year, heat, cold, rain, or snow. Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.). Work from all types of ladders and be able to transport/relocate ladders unassisted. Employee's personal weight with tools cannot exceed the rated weight capacity of ladders used. Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial lifts, cat walks and other safe work areas. Work in restricted areas (switch gear-room, manholes, utility tunnels and crawl spaces). Wear personal protective equipment as required. Able to work 40 hours per week plus overtime as required, to include night shifts. Required Physical/Mental Functions: Positively identify colors of wire and other items as required. Comprehend reading of blueprints drawings, and schematics same. Comprehend and practice safe work procedures as outlined in Company Safety Handbook. Operate company truck with manual and automatic transmission. Read and interpret maps, instructional manuals, work site directions, and written instructions. Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged standing and movement on foot. Climb ladders (all types). Repetitive use of arms, hands, and fingers AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

Overview Industrial Electricians (Ideal for Navy EMN or ETN) These positions are an immediate need and require relocation to Fort Wayne, IN. (If you meet this criteria but prefer a different location, contact us to review additional opportunities.) Full-Time | $90,000-$100,000+ Total First Year Compensation | Career Opportunity with an Industry Leading Company Our client is seeking highly skilled Industrial Electricians to join their expanding team. This is an exceptional full-time career opportunity designed for candidates with a strong technical foundation, particularly those with U.S. Navy Nuclear Electrician (EMN) or Nuclear Electronics Technician (ETN) backgrounds. If you thrive in fast-paced environments, excel at troubleshooting complex systems, and want to grow with a company that values technical excellence, we want to meet you. Key Responsibilities Perform electrical maintenance, troubleshooting, and repair on industrial equipment and control systems. Work with PLC-based controls, instrumentation, sensors, and automated systems. Diagnose electrical and electronic faults using schematics, test equipment, and system knowledge. Support installation, calibration, and commissioning of new equipment. Maintain and update documentation, wiring diagrams, and maintenance logs. Collaborate with engineering, operations, and maintenance teams to ensure system reliability. Participate in on-site technical support, system upgrades, and continuous improvement initiatives. Ensure all work complies with safety, quality, and operational standards. Ideal Candidate Profile U.S. Navy Nuclear Electrician's Mate (EMN) or U.S. Navy Nuclear Electronics Technician (ETN) Strong background in electrical systems, controls, instrumentation, and troubleshooting. Experience working with high-reliability systems, technical procedures, and strict safety protocols. Ability to interpret electrical schematics, wiring diagrams, and technical manuals. Comfortable relocating for a long-term career opportunity. Strong analytical thinking, attention to detail, and problem-solving ability. Compensation & Benefits $90,000-$100,000 first-year compensation, depending on experience. Full benefits package (health, dental, vision, retirement). Significant long-term growth and advancement opportunities within a rapidly expanding organization.

Responsible to participate on a team to pack a product received from a making area (for example liquid, powder, capsules, pills) that gets labeled and packaged, or a finished product item (for example: brush, floss, paste, refills, razors) that gets packaged, manually or with the assistance of a machine or robot. Acts as a System Owner or Equipment Owner for the area in which they operate. Operates and maintains the equipment in their area. Job Qualifications Are you ready to gain new skills to help run and maintain the latest production technology and equipment for the world's biggest brands? We're looking for team players who know how to take charge of business-related challenges and keep us running smoothly. Plant Technicians are vital to the success of our business at P&G. As a technician, you will work on a team that is responsible for keeping production flowing, meeting performance goals, and maintaining the high level of quality that consumers expect from our products. We require individuals who possess a high level of skill and initiative, understand the importance of continuous improvement, and can excel in a self-directed team environment. Electrical and Controls technicians are being hired as skilled members of our manufacturing operations teams. Electrical and Controls technicians are responsible for enabling production throughput, reducing equipment downtime, troubleshooting issues, eliminating defects, and building technical mastery. They focus on initiating and implementing continuous improvement projects with the goal of delivering the best product, at the lowest cost, with the highest quality, and in a safe environment. They have electrical technical mastery in order to successfully troubleshoot problems and to proactively improve production systems. Electrical and Controls technicians perform various types of work, such as: · Maintaining and troubleshooting high-speed packing, process, and utilities power & controls equipment · Using electrical test equipment to diagnose electrical problems · Performing preventive maintenance and calibrations on equipment · Troubleshooting, monitoring, & programming PLC, SCADA, and HMI systems · Troubleshooting and monitoring variable frequency drives, servo control systems, robotics · Troubleshooting and repairing machine and process control equipment · Analyzing trends and technical data to gain insights of the controls and identify issues proactively · Building technical skills in others Meaningful work on Day 1 We do various types of work, including operating and maintaining high-speed automated equipment, computer systems, or product distribution systems. From the beginning, you will be getting involved, impacting situations and influencing business-related problems. We offer you: · Ownership of your work from your first day · The ability to maintain world-renowned production technologies in some interesting ways · The chance to influence the production and quality of our products · Mentorship, coaching, training, and guidance · A safe work environment · Competitive pay and benefits We have no doubt these skills will help you on the job be: · Able to display skills in manufacturing processes, including operating, maintaining and cleaning automated equipment · Maintain accurate records and data · Display strong technical, interpersonal, and analytical skills · Able to operate essential material handling equipment at the site e.g., clamp truck, forklift, hand trucks, etc. We believe in order to be able to perform on the job, you will need to meet the following physical requirements: · Use basic hand and power tools · Lift 50 pounds by bending and stooping; climb, stand, and move around on stairs, ladders and platforms; twist, turn and bend · Stand on concrete floors for an extended period of time · Discern the various visual and audible alarms and signals for equipment start-up etc. The Lima Procter & Gamble Plant operates 7-days per week on 12 hour rotating shifts. We operate on a 2-2-3 work schedule rotating between days (5:30 am-6:00 pm) and nights (5:30 pm-6:00 am). We rely on local talent and relocation is generally not paid. Changes in business volume and production requirements can cause the plant to occasionally change the length of work shifts or the rotation schedule. Technicians are expected to be willing to rotate and to work any shift. Are you ready to join this renowned team? · Qualifications Qualifications We believe you will be an excellent fit here if, you: · Are 18 years of age or older · Have a minimum of a high school diploma, GED or equivalent education & 2-year technical degree/certification in Industrial Electrical or related field OR equivalent experience · Wear required safety personal protective equipment (eye protection, ear protection, safety shoes, gloves & respirator) and use appropriate fall protection (as needed) · Are willing to work rotating shifts · Knowledge and practical application with some of the following technology areas: PLC's, HMI's, process instrumentation, machine control systems, variable frequency drives (PowerFlex, etc.), servo drives, robotics, power distribution ( · Strong technical troubleshooting, problem-solving, issue resolution, and root cause analysis for industrial electrical issues · Capable of using PLC program navigation for troubleshooting · Able to read and use electrical schematics and single-line drawings · Able to use electrical troubleshooting tools for measurements and analysis · Interpersonal and teamwork skills · Able to rotate shifts (on a 2-2-3 rapid rotation schedule with 12-hour shifts) Just so you know: · Starting Pay/Salary Range: $38.07 Per Hour · Compensation for roles at P&G varies depending on a wide array of non-discriminatory factors including but not limited to the specific office location, role, degree/credentials, relevant skill set, and level of relevant experience. At P&G compensation decisions are dependent on the facts and circumstances of each case. Total rewards at P&G include salary + bonus (if applicable) + benefits. Your recruiter may be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the hiring process. · Successful completion of a Technical Interview will be required as part of the application process. · Relocation is generally not paid · All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability status, age, sexual orientation, gender identity and expression, marital status, citizenship, HIV/AIDS status or any other legally protected factor. · Immigration Sponsorship is not available for this role. For more information regarding who is eligible for hire at P&G along with other work authorization FAQ's, please click HERE. · Procter & Gamble participates in e-verify as required by law. · Qualified individuals will not be disadvantaged based on being unemployed. Job Schedule Full time Job Number R000139814 Job Segmentation Plant Technicians Starting Pay / Salary Range $38.07 / hour

The Certified Industrial Electrician is responsible for installing, maintaining, troubleshooting, and repairing electrical systems and equipment in a wastewater treatment facility. This role ensures safe, reliable, and efficient operation of electrical systems to support continuous production and facility operations while complying with all safety regulations and electrical codes. Essential Duties and Responsibilities Install, maintain, inspect, and repair industrial electrical systems, including power distribution, motors, controls, lighting, and instrumentation Troubleshoot electrical issues involving PLCs, VFDs, MCCs, sensors, and automated systems Read and interpret electrical schematics, blueprints, ladder logic diagrams, and technical manuals Perform preventive and predictive maintenance to reduce downtime and improve equipment reliability Test electrical systems using appropriate tools (multimeters, megohmmeters, thermal cameras, etc.) Ensure compliance with NEC, OSHA, NFPA 70E, and company safety policies Lockout/tagout (LOTO) equipment prior to performing maintenance or repairs Collaborate with maintenance, engineering, and operations teams to resolve equipment issues Document work performed, parts used, and maintenance activities in CMMS or maintenance logs Assist with equipment upgrades, retrofits, and new installations Respond to emergency electrical issues during production or off-hours as needed Maintain a clean, organized, and safe work environment Follow all safety policies, procedures, and regulations Participate in safety training and audits Report unsafe conditions, incidents, or near misses immediately Required Qualifications Journeyman or Master Electrician certification/license High school diploma or GED required; technical or trade school preferred Minimum 5 years of experience as an electrician in an industrial or manufacturing environment Strong knowledge of industrial electrical systems, controls, and safety standards Ability to read and interpret technical drawings and schematics Proficiency with electrical testing and diagnostic equipment Preferred Qualifications Experience with PLCs Experience with VFDs, automation, and industrial control systems Electrical experience in manufacturing, utilities, or wastewater treatment facilities CMMS experience Arc flash training or certification Physical Demands Ability to stand, walk, bend, kneel, and climb ladders or stairs for extended periods Ability to lift up to 50 pounds Ability to work in confined spaces, elevated platforms, and industrial environments Manual dexterity to work with tools, wiring, and small components Work Environment Industrial facility with exposure to noise, dust, vibration, heat, and electrical hazards May require shift work, overtime, weekends, or on-call availability Use of required PPE including safety glasses, gloves, arc flash gear, and hearing protection

COMPANY OVERVIEWFounded in Washington Court House, OH in 1966, SugarCreek began as a raw bacon manufacturer. Its commitment to manufacturing the highest quality, best value products has allowed SugarCreek to grow into a diversified, flexible, and creative food manufacturer. Today, SugarCreek operates 7 facilities, providing a wide assortment of raw and fully cooked products for domestic and international customers across all channels of trade. DESCRIPTION SUMMARYUse hand, power and precision measuring tools to assemble, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures. Diagnose malfunctioning systems, apparatus and components to locate the cause of a breakdown and correct the problem. PRINCIPAL DUTIES AND RESPONSIBILITIES • Maintain electrical equipment to meet regulatory codes at the county, state and federal levels. • Read and interpret drawings, blueprints, schematics and electrical code specifications to determine layout of industrial electrical equipment installations.• Perform rigging activities, safety-related functions and other miscellaneous electrical function.• Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, feeders, fiber-optic and coaxial cable assemblies, lighting fixtures and other electrical components.• Test electrical and electronic equipment and components for continuity, current, voltage and resistance.• Maintain, repair, install and test switchgear, transformers, switchboard meters, regulators and reactors.• Maintain, repair, test and install electrical motors, generators, alternators, industrial storage batteries and hydraulic, pneumatic electrical control systems, and motor control circuitry. • Troubleshoot, maintain and repair industrial, electrical and electronic control systems and other related devices.• Conduct preventive maintenance programs and keep maintenance records• Install, maintain and calibrate industrial instrumentation and related devices.• Perform installation and maintenance work as part of a team of skilled trade workers. • Define scope of work for new electrical installation projects as well as upgrade or refurbishment to existing system, build a bill of materials list, request job or parts quotes, work with third party contractors and/or vendors and submit written job requisitions.• Navigate the computerized maintenance management system (CMMS) to identify parts in inventory, submit requisitions, review work orders and preventative maintenance tasks.• Comply with federal, state, and company policies, procedures and regulations. • Support all safety, food quality and sanitation initiatives and policies. • Follow SugarCreek safety rules and procedures. • Perform other duties and tasks as assigned. MINIMUM QUALIFICATIONS EDUCATION: High School diploma or equivalent (GED), or equivalent experience. EXPERIENCE: Four (4) years of journey-level electrical experience, OR completion of a four-year, accredited technical training program in electrical repair and maintenance and two (2) years of electrical experience. Any equivalent combination of experience and/or education from which comparable knowledge, skills and abilities have been achieved is also acceptable. CERTIFICATION OR LICENSURE REQUIREMENTS: None. ABILITIES, KNOWLEDGE, AND SKILLS REQUIRED • Know how to test electrical systems and continuity of circuits in electrical wiring, equipment and fixtures, using testing devices such as ohmmeters, voltmeters and oscilloscopes to ensure compatibility and safety of system. • Possess working knowledge of NFPA 79: Electrical Standard for Industrial Machinery, Ugly's Electrical Reference, NFPA 70 National Electrical Code.• Know relevant Occupational Safety and Health Administration (OSHA) requirements for proper electrical installation for industrial electrical installations.• Possess strong experience with 3-phase, 480V, and industrial troubleshooting.• Able to routinely use computer programs such as Microsoft Office (Word, PowerPoint, Outlook, and Excel).• Know how to troubleshoot Programmable Logic Controllers (PLC). • Able to assemble, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures.• Know how to competently program and troubleshoot Variable Frequency Drives (VFD). • Able to safely and proficiently use shop tools (both hand and power). • Able to safely utilize a forklift and high lift. • Possess strong self-motivation and exemplary work ethic. • Able to be a self-directed individual but also take direction from plant leadership.• Possess strong knowledge of machines and tools, including their designs, uses, repair and maintenance. OTHER REQUIREMENTS No unusual physical requirements. Physical requirements are consistent with industrial electrician positions, including mostly sitting with some standing/walking required. Other light physical activity like using stairs or occasionally moving items weighing less than 15lbs may be required as needed. Some travel may be required in between plants. WORK ENVIRONMENT Some travel to other locations is required. Most work is performed in a comfortable, indoor, office-like facility. Some work is performed in an indoor, manufacturing facility with close proximity to heavy and hazardous machinery. Safety wear is required, including hard hat, hairnet, hearing protection, safety glasses, steel toe boots, coats and other necessary equipment. Some work is performed outside of the manufacturing facility.

Rate of Pay and Benefits: Electricians are paid a starting hourly rate of $43.80 with a top hourly base rate of $44.00, plus C.O.L.A., and applicable shift, overtime, and holiday premiums. Cleveland Engine Plant is unique as our electricians are represented by the International Brotherhood of Electrical Workers (IBEW). Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Proficiency in reading hardware and ladder logic prints, troubleshooting electrical and robotic systems and equipment (e.g. Fanuc. ABB, Kawasaki). Working knowledge with PLCs (e.g. Siemens, Allen Bradley, Square D, Control Logix) servo controls and variable frequency drives is required. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Willingness and ability to work on any assigned schedule, change shifts, work more than 8 hours per day and/or work overtime, all while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures, to work in a team environment, treat co-workers with dignity and respect regardless of personal differences, and accept and follow instructions and requests from leadership. Ability and willingness to understand and follow instructions, both oral or in writing. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility.

Definition City of Columbus Dept. of Columbus Water and Power Plant Maintenance Electrician I The City of Columbus, Columbus Water and Power, Division of Water is accepting applications for a vacant full-time Plant Maintenance Electrician I. This position will be responsible for installing, maintaining, troubleshooting, and repairing electrical equipment (up to 15kVA) as well as associated systems and devices at remote tanks and booster stations. This position will perform preventative maintenance on electrical systems and equipment including generators; troubleshoot and diagnose electrical systems and equipment using wiring diagrams, schematics, and testing equipment; climb heights up to 200 feet safely or utilize aerial equipment safely to access work; collect data, maintain records, and utilize a CMMS software program; and perform general housekeeping tasks such as cleaning, inventory, organizing, or snow removal. To qualify you must have two (2) years of experience troubleshooting, installing, and repairing 3-phase electrical equipment in an industrial facility. Substitution(s): Successful completion of a formal classroom or apprenticeship training program in the general principles of electricity may substitute for six (6) months of the required experience. Possession of a valid driver's license is required. Salary: $30.01 - $46.38 hourly. If you are interested, please apply to the Civil Service Commission by applying online at ************************************************** You may also apply by email: *************************** or fax: ************. Pre-employment drug screening and BCI& I background check are required if selected. The City of Columbus is an equal opportunity employer. Under general supervision, is responsible for installing, maintaining, troubleshooting, and repairing electrical equipment (up to 15kV AC), wiring systems and accessories; performs related duties as required. Examples of Work (Any one position may not include all of the duties listed, nor do the examples cover all of the duties that may be performed.) Performs work on or near energized circuits with voltage levels up to and including 15kV; Tests defective equipment to determine cause of malfunction or failure using a variety of electrical testing apparatus; Tests, repairs, or replaces equipment such as relays, switches, controls, and instrumentation both on and off plant grounds; Bends and installs conduit; Installs and repairs light fixtures, appliances, power tools, fans, etc. both on and off plant grounds; Uses precautionary work methods as prescribed in related safety procedures and policies; Interprets wiring diagrams to trace and connect numerous wires carrying current for independent functions; Draws and modifies electrical wiring diagrams and schematics; Maintains equipment, work logs, and system modification records utilizing a computerized maintenance management system (CMMS); Notifies appropriate personnel of necessary downtime associated with projects that disrupt normal operations; Cleans up work area after completion of a job; Climbs heights to access work sites; Performs preventative maintenance on electrical equipment; May assist plant personnel, including instruments technicians, on projects involving electrical equipment. Minimum Qualifications Two (2) years of experience troubleshooting, installing and repairing 3-phase electrical equipment in an industrial facility. Substitution(s): Successful completion of a formal classroom or apprenticeship training program in the general principles of electricity may substitute for six (6) months of the required experience. Possession of a valid driver's license. Test/Job Contact Information Recruitment #: 25-3799-V5 Employment Type: Full-Time (Regular) Should you have questions regarding this vacancy, please contact: Madelyn Pine Columbus Water & Power Division of Water 910 Dublin Rd. Columbus, Ohio 43215 P: ************** E:******************* The City of Columbus is an Equal Opportunity Employer

JOIN A TEAM THAT CHANGES LIVES Principle Business Enterprises, Inc. (PBE) is a family-run, value-driven organization with big hearts and true passion for what we do. Celebrating over 60 years of service to the healthcare field and over 30 years as a pioneer in the development of incontinence and moisture management solutions, we're living our mission to improve the lives of caregivers, those who wear our products and our workforce. Our commitment includes innovative and life-changing products; positive partnerships with customers and suppliers; wellbeing programs that support our Associates and their families; and community support. We offer excellent health benefits including free access to onsite and a local health clinic, paid personal and vacation time, an annual profit-sharing bonus, a 401k plan with a company match, company-paid disability and life insurance, and more. We also offer many perks that recognize our associates' hard work and allow them to have fun! We are a safe and clean manufacturing plant looking for respectful, team-oriented candidates who have a great work ethic and thrive in a fast-paced environment focused on safety, continuous improvement and producing quality products that help the lives of others. Learn more about PBE's culture and benefits by clicking here. POSITION SUMMARY: The Electrical Controls Technician is responsible for troubleshooting, maintaining, repairing, programming and installing electrical control systems used in manufacturing, including plant power distribution equipment, facility electrical equipment and auxiliary systems. SPECIFIC RESPONSIBILITIES: Troubleshoot electrical control systems, and mechanical, pneumatic, hydraulic, and general industrial control equipment. Identify and perform machine preventative maintenance and repairs based on machine operation and condition. Identify equipment requiring periodic maintenance and help develop and maintain schedules for maintenance intervals. Interact with production and operations associates to determine machine issues and resolution action plans. Set priorities based on production needs. Account for and record parts and supplies used for repairs of equipment and plant utilities. Develop B-O-Ms for electrical jobs performed in the plant. Involvement in determining spare parts stock levels and part types. Involved in developing a standard parts scheme for the plant. Involvement in creating and maintaining plant electrical system documentation. Keep plant electrical test equipment in proper working condition. Build new electrical control equipment as well as modify existing equipment. Read, develop and interpret technical documents and drawings (operating/maintenance instructions, electrical drawings and schematics, programs, procedure manuals). Perform & manage small to medium plant electrical projects and work orders. Keep abreast of new electrical control technologies. Be available for off-shift technical support to production lines. Develop and conduct technical training for other plant associates. Operate, utilize, and maintain a personal computer for electrical troubleshooting, programming, configuring, and general maintenance of electrical control equipment. Demonstrate analytical and problem-solving skills. Understand & follow NEC/NFPA 70, 70E, & 79, as well as OSHA code regulations as they pertain to the plant facility & equipment. MINIMUM QUALIFICATIONS: 3+ years of experience in electrical/industrial controls. Working knowledge of PLC programming, variable speed drive systems/motion control systems, HMI (Human Machine Interface) programming Working knowledge of temperature controls systems Excellent analytical and problem-solving skills PREFERRED QUALIFICATIONS: Associate's degree in electrical engineering or a related field Experience in project management PHYSICAL REQUIREMENTS: Must be able to stand for long periods; use hands to handle objects, tools, or controls; reach with hands and arms; climb, stoop, kneel, and/or crouch. Must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Must have close, distance, color, & peripheral vision abilities along with depth perception and the ability to adjust focus. *Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. We are an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Steel Equipment Specialists is a leading player in the steel equipment manufacturing and engineering industry, committed to delivering top-quality products and services to our clients. With a strong dedication to innovation, design, and commissioning, we are seeking a motivated and dependable Control Panel Techniciann to join our team. Job Summary: Electrical assembly and wiring of material handling and process line control panel systems per layout design drawings and electrical schematics. Includes electrical motor control, operator and interface stations, I/O enclosures. Responsibilities: - Electrical power and control component recognition and function. Inspect components for defects, non-conformance. - Layout, assemble and mount electrical control components for wiring per electrical design and manufacturer's spec, determine correct method to secure electrical components per panel shop standard, using tape measure, t-squares, powered and manual hand tools. - Interface with electrical engineer to discuss any design layout issues for resolution. - Wire electrical control panel system per electrical schematics, manufacturers spec using acceptable wiring standards and practices. - Practice and model proper tool usage, safety standards. Requirements and Skills: - Mechanical aptitude; proper use of assembly and wiring tools per generally acceptable shop practices and manufacturers spec. Previous control panel assembly required. - Read, understand, interpret electrical schematics. Must know electrical symbols and identify on electrical schematics. Previous control panel wiring required. Knowledge of wire type and size and correct terminating methods. - Minimum 2 - 3 years' experience assembly and wiring of electrical control systems per NFPA-70, NEC, UL-508A. - Knowledge of how to wire Relays, Operator Interface devices, VFD's, I/O devices, Sensors, Motors. - Working relay logic, basic computer skills. - Ability to work independently and in a group setting, making decisions based on information given for desired requirements. - Stand for 8 hr. shift; Lift 40 - 50 lbs. from floor. - Must have verbal, math, reasoning skills. Benefits - Steel Equipment Specialists actively benchmarks our employee positions to confirm we offer the most competitive of salaries and accurately scale commensurate with experience. - Comprehensive health, dental, and vision insurance with Anthem Blue Cross Blue Shield - 401(k) retirement plan with excellent company match - Generous paid time off and holiday schedule - Professional development opportunities - Student Loan reimbursement opportunities to maximize earnings - Annual Profit Sharing bonuses Steel Equipment Specialists, LLC is an equal opportunity-employer. Join our team and help us maintain our commitment to excellence in the steel manufacturing and engineering industry! Your expertise and dedication will make a significant impact on our organization and contribute to the growth of our business, our employees, and our community.

Job Title: Maintenance and Electrical Controls Technician Reports To: Maintenance Supervisor Primary Purpose: The Maintenance Technician plays a critical, hands-on role in supporting plant uptime and performance. This position is 100% floor-based, directly responding to equipment breakdowns, performing preventive maintenance, and assisting with project-related tasks. A core responsibility of this role is to troubleshoot Mechanical, Electrical and PLC based control system issues in real time to minimize downtime and support efficient operations. The ideal candidate is a strong problem solver, highly responsive, and thrives in a fast-paced manufacturing environment Primary Duties & Responsibilities Real-Time Equipment Support & Troubleshooting Immediately respond to breakdowns and perform on-the-spot repairs to restore production. Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems, including PLC I/O and instrumentation. Collaborate with operators to identify and resolve root causes of equipment malfunctions. Support line changeovers and production start-ups. PLC and Electrical Control Support Diagnose and repair PLCs, HMIs, VFDs, and control-related issues. Troubleshoot systems using tools such as Allen-Bradley RSLogix 5000. Assist with equipment upgrades, installations, and control panel builds. Run conduit, pull wire, and terminate Ethernet and communication cabling. Preventive Maintenance and Continuous Improvement Perform scheduled preventive maintenance with focus on reliability and efficiency. Take ownership of specific PM areas and proactively improve them. Accurately document all maintenance activities in the CMMS. Identify recurring issues and propose long-term corrective actions. Project and Fabrication Work Assist in machinery installation and facility improvement projects. Perform light fabrication and welding for safety and efficiency-related improvements. Safety & Communication Always follow safety protocols and use proper PPE. Keep work areas clean, organized, and free from hazards. Attend and contribute to daily shift meetings and status updates. Key Attributes & Abilities Strong problem-solving and troubleshooting skills. Ability to work under pressure and make fast, informed decisions. Good communication and team collaboration abilities. High personal accountability, attention to detail, and reliability. Open-minded and eager to learn new systems and technologies. Willing to work 8- or 12-hour shifts depending on business demands, with overtime as needed. Qualifications & Experience High school diploma or equivalent required; technical certifications or trade school training preferred. Minimum 4 years of industrial maintenance experience, preferably in a manufacturing environment. Demonstrated experience with PLC troubleshooting and industrial electrical systems. Working knowledge of RSLogix 5000 or similar programming environments preferred. Ability to interpret electrical, hydraulic, pneumatic, and mechanical schematics. Basic welding and fabrication skills. Understanding of Lean principles, 5S, and Root Cause Analysis is a plus. Familiarity with CMMS platforms for logging repairs, PMs, and work orders; ability to navigate and input data accurately. Physical Requirements Must be able to remain on the factory floor for long periods of time, potentially a full shift Ability to lift, push, pull, or carry up to 50 lbs. Ability to crouch, bend, kneel, squat, twist, reach, and stand for extended periods Ability to perform equipment maintenance tasks requiring full-body movement and sustained physical effort Requires full range of motion in arms, hands, and fingers to reach, grasp, hold, push, pull, twist, and use tools Must be able to climb and work on ladders Ability to stay alert and react quickly to plant conditions Schedule may require 40+ hours per week to support manufacturing production. Note: The statements above are intended to describe the general nature and level of work being performed by people assigned to the job. They are not construed to be an exhaustive list of responsibilities, duties and skills required of personnel in the job. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

The Electrical Controls Technician will carry out skilled maintenance and repair work throughout the buildings, and grounds; specializes in electrical control systems of automated equipment and assists with program control sequences, control devices and their interface with the Building Automation Systems In this role, you will be responsible for: Perform work on various projects with disciplines in Electrical, PLC Programing, Pneumatics, Hydraulics, Servo Drives, Servo Motors and VFD's with emphasis on Safety. Perform preventative maintenance on all facility equipment according to maintenance schedule. Provide feedback to improve our PM system and process. Fix facility and equipment problems as they arise. Work directly with maintenance vendors as needed. Request purchase orders and order parts. Answer vendor questions. Work with vendor to ensure that projects are completed safely, accurately, and according to schedule. Be accessible to the KOST team by carrying a radio and communicating with Team Members as needed. May be required to train operators as needed. Support production as needed. Able to follow LOTO Procedures. Other duties as assigned. Skills and Qualifications: High school diploma and five years of experience in a similar role. Proficient in the proper use of hand tools and power tools. Competent in basic fabrication skills such as welding, cutting, and grinding. Competent in basic plumbing skills such as fitting PVC pipe, copper pipe, and other common plumbing materials. Basic electrical skills - Familiar with voltages up to 480v, able to detect voltage with a meter, able to check fuses with a meter, and able to troubleshoot basic control circuits. Experience in PLC Programming and Industrial Controls Technology or equivalent education in a related field, preferably 2 or more years. Proficiency in PC operating skills and Microsoft Office software applications. Experience calibrating and interfacing with analog transmitters, VFD's, load cell systems, etc. Experience with AB PLC platforms (programming, configuring, Backup PLC Program Files, etc.). Experience with Servo Control Systems. Experience with Robotic Control Systems. Physical Requirements: This role frequently requires the employee to walk; reach with hands and arms; stoop, kneel, crouch, or crawl. Manufacturing plant setting with exposure to noise, heat, cold, and moving machinery. Will require working in outside weather conditions and is occasionally exposed to wet and/or humid conditions. Requires use of personal protective equipment (PPE). May involve climbing ladders, working at heights, or in tight spaces.

The Electrical Controls Technician will carry out skilled maintenance and repair work throughout the buildings, and grounds; specializes in electrical control systems of automated equipment and assists with program control sequences, control devices and their interface with the Building Automation Systems In this role, you will be responsible for: Perform work on various projects with disciplines in Electrical, PLC Programing, Pneumatics, Hydraulics, Servo Drives, Servo Motors and VFD's with emphasis on Safety. Perform preventative maintenance on all facility equipment according to maintenance schedule. Provide feedback to improve our PM system and process. Fix facility and equipment problems as they arise. Work directly with maintenance vendors as needed. Request purchase orders and order parts. Answer vendor questions. Work with vendor to ensure that projects are completed safely, accurately, and according to schedule. Be accessible to the KOST team by carrying a radio and communicating with Team Members as needed. May be required to train operators as needed. Support production as needed. Able to follow LOTO Procedures. Other duties as assigned. Skills and Qualifications: High school diploma and five years of experience in a similar role. Proficient in the proper use of hand tools and power tools. Competent in basic fabrication skills such as welding, cutting, and grinding. Competent in basic plumbing skills such as fitting PVC pipe, copper pipe, and other common plumbing materials. Basic electrical skills - Familiar with voltages up to 480v, able to detect voltage with a meter, able to check fuses with a meter, and able to troubleshoot basic control circuits. Experience in PLC Programming and Industrial Controls Technology or equivalent education in a related field, preferably 2 or more years. Proficiency in PC operating skills and Microsoft Office software applications. Experience calibrating and interfacing with analog transmitters, VFD's, load cell systems, etc. Experience with AB PLC platforms (programming, configuring, Backup PLC Program Files, etc.). Experience with Servo Control Systems. Experience with Robotic Control Systems. Physical Requirements: This role frequently requires the employee to walk; reach with hands and arms; stoop, kneel, crouch, or crawl. Manufacturing plant setting with exposure to noise, heat, cold, and moving machinery. Will require working in outside weather conditions and is occasionally exposed to wet and/or humid conditions. Requires use of personal protective equipment (PPE). May involve climbing ladders, working at heights, or in tight spaces.

Job Description Electrical Controls Technician - 3rd Shift JOIN A TEAM THAT CHANGES LIVES Principle Business Enterprises, Inc. (PBE) is a family-run, value-driven organization with big hearts and true passion for what we do.Celebrating over 60 years of service to the healthcare field and over 30 years as a pioneer in the development of incontinence and moisture management solutions, we're living our mission to improve the lives of caregivers, those who wear our products and our workforce. Our commitment includes innovative and life-changing products; positive partnerships with customers and suppliers; wellbeing programs that support our Associates and their families; and community support. We offer excellent health benefits including free access to onsite and a local health clinic, paid personal and vacation time, an annual profit-sharing bonus, a 401k plan with a company match, company-paid disability and life insurance, and more. We also offer many perks that recognize our associates' hard work and allow them to have fun! We are a safe and clean manufacturing plant looking for respectful, team-oriented candidates who have a great work ethic and thrive in a fast-paced environment focused on safety, continuous improvement and producing quality products that help the lives of others. Learn more about PBE's culture and benefits by clicking here. POSITION SUMMARY: The Electrical Controls Technician is responsible for troubleshooting, maintaining, repairing, programming and installing electrical control systems used in manufacturing, including plant power distribution equipment, facility electrical equipment and auxiliary systems. SPECIFIC RESPONSIBILITIES:- Troubleshoot electrical control systems, and mechanical, pneumatic, hydraulic, and general industrial control equipment. Identify and perform machine preventative maintenance and repairs based on machine operation and condition. Identify equipment requiring periodic maintenance and help develop and maintain schedules for maintenance intervals. Interact with production and operations associates to determine machine issues and resolution action plans. Set priorities based on production needs. Account for and record parts and supplies used for repairs of equipment and plant utilities. Develop B-O-Ms for electrical jobs performed in the plant. Involvement in determining spare parts stock levels and part types. Involved in developing a standard parts scheme for the plant. Involvement in creating and maintaining plant electrical system documentation. Keep plant electrical test equipment in proper working condition. Build new electrical control equipment as well as modify existing equipment. Read, develop and interpret technical documents and drawings (operating/maintenance instructions, electrical drawings and schematics, programs, procedure manuals). Perform & manage small to medium plant electrical projects and work orders. Keep abreast of new electrical control technologies. Be available for off-shift technical support to production lines. Develop and conduct technical training for other plant associates. Operate, utilize, and maintain a personal computer for electrical troubleshooting, programming, configuring, and general maintenance of electrical control equipment. Demonstrate analytical and problem-solving skills. Understand & follow NEC/NFPA 70, 70E, & 79, as well as OSHA code regulations as they pertain to the plant facility & equipment. MINIMUM QUALIFICATIONS:- 3+ years of experience in electrical/industrial controls. Working knowledge of PLC programming, variable speed drive systems/motion control systems, HMI (Human Machine Interface) programming Working knowledge of temperature controls systems Excellent analytical and problem-solving skills PREFERRED QUALIFICATIONS:- Associate's degree in electrical engineering or a related field Experience in project management PHYSICAL REQUIREMENTS:- Must be able to stand for long periods; use hands to handle objects, tools, or controls; reach with hands and arms; climb, stoop, kneel, and/or crouch. Must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Must have close, distance, color, & peripheral vision abilities along with depth perception and the ability to adjust focus. *Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. We are an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Are you looking for an exciting career providing thrills to people from all over the world? Cedar Point is looking for qualified Electrical Controls Technicians. As an Electrical Controls Technician, you would be responsible for diagnostics, repairs, and maintaining Cedar Point's controls systems. Working as a team, the systems are maintained to a high standard. This is done utilizing digital multi-meters, PLC ladder logic, electrical, hydraulic, and pneumatic schematics, and other types of diagnostic software and tools. Must have a working knowledge of Allen Bradley controls to include DC and AC drives and a multitude of PLCs from the tried-and-true PLC5 to the latest and greatest ControlLogix. The brands of drives and PLCs are not limited to Allen Bradley. Responsibilities: Install and repair electrical systems. Calibrate equipment, design, inspect, and troubleshoot wiring, panels, glitches, and other malfunctions. Diagnose and repair DC drive controllers and DC motors. Must know how to use amp probe, digital volt meter, oscilloscope and other test equipment. Diagnose PLC (SLC500, PLC5, NUMA LOGIC, ControlLogix 5000, CompactLogix) and relay logic electrical problems. Working knowledge of Allen Bradley, Icom software programs, hydraulic and pneumatic systems desirable. Familiar with AutoCad and capable of drawing schematics. Standard control system wiring practices and control sensing devices such as proximity sensors, photo eyes, etc. Other duties may be assigned. #LI-UW1 Qualifications: Must join electrical union. Associate degree in industrial or robotic control systems preferred. High degree of computer literacy preferred. Maintenance journeyman (Class A) preferred. Minimum of 3-5 years of industrial control system experience preferred. High school graduate/GED preferred. Driver's License Ability to work nights, weekends and holiday periods to meet business needs. Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.

STARTING WAGE-$42.67! We are seeking LONG TERM employees who can grow their careers with us! CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 23,000 people and a net sales of over $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Crown manufactures metal packaging for Aerosol, Beverage, Food, Metal Closures and Specialty Packaging products. In a nutshell, Crown makes cans and closures. Most of the world's leading brands trust Crown to package their products. Crown's size and scope enables us to provide global breadth as well as regional expertise. Starting pay for Electrician/General Plant Maintenance position is $42.67. This role may be called one of the following at another company: Industrial Electrician, Maintenance Technician, Electrician. Crown offers industry leading benefits including paid vacation, paid holidays, wellness benefits (medical, dental, vision, prescription medication), basic life insurance paid 100% for the employee. Yes, you read that correctly-FREE HEALTH INSURANCE FOR ALL EMPLOYEES! We also have 100% match up to 6% on 401(k) and other benefits. Crown currently has one opening for an Electrician/General Plant Maintenance technician at our Dayton, OH facility. Here is your opportunity to help on the Dayton team that manufactures millions of beverage can ends per day. The Electrician/General Plant Maintenance duties include: Troubleshoots equipment stoppages and reacts accordingly Participates in routine preventative/predictable maintenance and performs routine checks Assists manufacturing during product change-overs Utilizes various mechanical and electrical test equipment Monitors and reacts in a timely manner to routine demand maintenance requirements Associates degree in a technology/industrial/ manufacturing preferred (or equivalent experience) 3-5 years practical hands on experience in an industrial setting Knowledge on Allen Bradley PLC's, Vision and other complex automation systems. Robotics is a plus. Experience with high pressure hydraulics, pneumatics, and automated material handling utilizing 480vac VFD's and PLC control logic troubleshooting Good mechanical aptitude Ability to work with minimal supervision Able to read, interpret blueprints on manufacturing equipment. Interpret manuals and industrial standards. (Electrical Code and OSHA regulations) Light machining and welding skills. Light fabrication skills. Must be willing to work 12-hour shifts and rotating schedule Must pass pre-employment physical, drug test and background check. Physical Requirements While performing the duties of this job, the team member is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls, and reach with hands and arms. The team member frequently is required to climb or balance and talk or hear. The team member is occasionally required to stoop, kneel, crouch, or crawl. The team member must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and / or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EEO/AA/Vets/Disabled

Are you looking for an exciting career providing thrills to people from all over the world? Cedar Point is looking for qualified Electrical Controls Technicians. As an Electrical Controls Technician, you would be responsible for diagnostics, repairs, and maintaining Cedar Point's controls systems. Working as a team, the systems are maintained to a high standard. This is done utilizing digital multi-meters, PLC ladder logic, electrical, hydraulic, and pneumatic schematics, and other types of diagnostic software and tools. Must have a working knowledge of Allen Bradley controls to include DC and AC drives and a multitude of PLCs from the tried-and-true PLC5 to the latest and greatest ControlLogix. The brands of drives and PLCs are not limited to Allen Bradley. Responsibilities: Install and repair electrical systems. Calibrate equipment, design, inspect, and troubleshoot wiring, panels, glitches, and other malfunctions. Diagnose and repair DC drive controllers and DC motors. Must know how to use amp probe, digital volt meter, oscilloscope and other test equipment. Diagnose PLC (SLC500, PLC5, NUMA LOGIC, ControlLogix 5000, CompactLogix) and relay logic electrical problems. Working knowledge of Allen Bradley, Icom software programs, hydraulic and pneumatic systems desirable. Familiar with AutoCad and capable of drawing schematics. Standard control system wiring practices and control sensing devices such as proximity sensors, photo eyes, etc. Other duties may be assigned. #LI-UW1 Qualifications: Must join electrical union. Associate degree in industrial or robotic control systems preferred. High degree of computer literacy preferred. Maintenance journeyman (Class A) preferred. Minimum of 3-5 years of industrial control system experience preferred. High school graduate/GED preferred. Driver's License Ability to work nights, weekends and holiday periods to meet business needs. Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.

STARTING WAGE-$42.67! We are seeking LONG TERM employees who can grow their careers with us! CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 23,000 people and a net sales of over $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Crown manufactures metal packaging for Aerosol, Beverage, Food, Metal Closures and Specialty Packaging products. In a nutshell, Crown makes cans and closures. Most of the world's leading brands trust Crown to package their products. Crown's size and scope enables us to provide global breadth as well as regional expertise. Starting pay for Electrician/General Plant Maintenance position is $42.67. This role may be called one of the following at another company: Industrial Electrician, Maintenance Technician, Electrician. Crown offers industry leading benefits including paid vacation, paid holidays, wellness benefits (medical, dental, vision, prescription medication), basic life insurance paid 100% for the employee. Yes, you read that correctly-FREE HEALTH INSURANCE FOR ALL EMPLOYEES! We also have 100% match up to 6% on 401(k) and other benefits. Crown currently has one opening for an Electrician/General Plant Maintenance technician at our Dayton, OH facility. Here is your opportunity to help on the Dayton team that manufactures millions of beverage can ends per day. The Electrician/General Plant Maintenance duties include: Troubleshoots equipment stoppages and reacts accordingly Participates in routine preventative/predictable maintenance and performs routine checks Assists manufacturing during product change-overs Utilizes various mechanical and electrical test equipment Monitors and reacts in a timely manner to routine demand maintenance requirements Associates degree in a technology/industrial/ manufacturing preferred (or equivalent experience) 3-5 years practical hands on experience in an industrial setting Knowledge on Allen Bradley PLC's, Vision and other complex automation systems. Robotics is a plus. Experience with high pressure hydraulics, pneumatics, and automated material handling utilizing 480vac VFD's and PLC control logic troubleshooting Good mechanical aptitude Ability to work with minimal supervision Able to read, interpret blueprints on manufacturing equipment. Interpret manuals and industrial standards. (Electrical Code and OSHA regulations) Light machining and welding skills. Light fabrication skills. Must be willing to work 12-hour shifts and rotating schedule Must pass pre-employment physical, drug test and background check. Physical Requirements While performing the duties of this job, the team member is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls, and reach with hands and arms. The team member frequently is required to climb or balance and talk or hear. The team member is occasionally required to stoop, kneel, crouch, or crawl. The team member must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and / or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. EEO/AA/Vets/Disabled