Industrial electrician jobs in Racine, WI - 138 jobs

I am looking to hire a Lead Maintenance Technician for a reputable manufacturing company here in Mukwonago, WI (53149). This is a permanent position that is looking to interview/start immediately! Pay: $85k- $105k (based on experience) & Benefits Benefits: Health, Vision, Dental, 401k, PTO, Holidays, etc. Hours: 1st Shift, M-F, will be on call Key Responsibilities: 10+ years' experience with leading/managing large scale capital projects and managing vendors related to manufacturing facility maintenance, preferably plastic injection molding. Electrical, mechanical, hydraulic, pneumatic, and HVAC skills. Working knowledge of fabrication and machine shop tools. Ability to read electrical schematics, diagnose electrical issues Strong attention to detail and ability to prioritize and handle multiple tasks. Great written and verbal communication skills Qualifications ERP system and CMMS experience and working knowledge required. Ability to be on call as needed for emergencies after hours. Ability to communicate with all levels of employees.

Day Shift: 6:00am-2:30pm Reporting to the Manufacturing Engineer, the Industrial Maintenance Tech will be responsible for shift support for all electrical/mechanical problems that might arise with equipment/facilities as well as completing all predictive and preventative maintenance work. This position would also be responsible for all machine management and maintenance across the fabrication department and would lead special projects to both equipment/facilities and systems development. Essential Duties and Responsibilities include the following, as well as other duties may be assigned. Follow all safe work practices and procedures. Wear all prescribed personal protective equipment. Ensure all proper lockout/tag out procedures are followed. Provide shift support for all electrical/mechanical and technical problems Install, maintain, remove, troubleshoot, and diagnose a wide variety of electrical/mechanical equipment and components used in manufacturing process. Troubleshoots, repairs, and maintains a variety of production machinery and equipment including electrical, mechanical, hydraulic, and pneumatic systems and parts. Installs, modifies, and relocates machinery and equipment and performs fabrication, welding, mechanical, electrical, electronics, plumbing, carpentry, or other maintenance skills. Repairs and modifies buildings and plant systems as required. Troubleshooting and repair of components such as rolls, shafts, bearings, drive belts, drive chains and gear boxes utilizing basic mechanics hand and power tools Troubleshooting and repair of pumps, valves, and piping systems to include installation of coper pipes or PVC pipes. Reads and interprets manuals, schematics, blueprints, drawings, and other written installation and repair instructions Identify and complete predictive and preventative maintenance work and weekly mechanical press inspections Machinery includes NC Turret Presses, Waterjet, Press Brakes, Routers, Welders, Drill Presses, and hand power tools. Manage backlog of work orders. Maintain Maintenance Area tools and equipment. Maintain and organize all toolboxes, workspaces, and maintenance specific equipment. Perform other duties as required to maintain or improve plant reliability. Conduct daily safety risk assessments on routine and non-routine job tasks. Lead systems development work such as standard work, training, and housekeeping initiatives throughout the plant. Travel: Minimal; less than 5% Qualifications & Experience: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School or GED education required (Diploma or GED). 3+ Years of Mechanical experience in an industrial environment. Bilingual in English and Spanish is preferred. Machining and fabrication experience. High level experience troubleshooting manufacturing equipment. Welding, machining, and fabrication skills. Demonstrated skill in working with conveyors, mechanical drive systems (gearboxes, sheaves, pulleys, belts, bearings, sprockets, and chains), pumps, hydraulics, and pneumatics. Ability to perform precision tasks including alignments using lasers, dial indicators, etc. Physical Demands The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Plant Environment This position operates in a manufacturing setting and can be subject to extreme cold and hot temperatures; uneven walking surfaces with cords, tools, and other obstacles; intermittent loud noises; and dusty or dirty conditions. Required PPE includes: Hard hat (when required), safety glasses, earplugs, steel toe/composite boots, cut sleeves/cut resistant gloves and fall protection. Education and/or Experience

Pay Type: Amrize is building North America. From bridges and railways to data centers, schools, offices and homes, our solutions are inside the buildings and infrastructure that connect people and advance how we live. And we invite you to come and build with us. As the partner of choice for professional builders, we offer advanced branded solutions from foundation to rooftop. Wherever our customers are, whatever their job, we're ready to deliver. Our 19,000 colleagues work across 1,000 sites supported by an unparalleled distribution network. Infrastructure, commercial and residential, new build, repair and refurbishment: We're in every construction market. Amrize listed on the New York Stock Exchange and the SIX Swiss Exchange on June 23, 2025, following our spinoff as an independent company. Join us and build _your_ ambition. Learn more at ********************** (****************************************** Description: Join the Gaco team, a trusted name in building envelope solutions with a heritage dating back to 1955. We're seeking aIndustrial Electricianwho's ready to be part of a company committed to formulating everyday success for every customer through innovative, reliable products used to adhere, seal, and protect at every level of the building envelope. **1st and 2nd shift** **ABOUT THE ROLE** We are seeking a skilled and safety-biased Journeyman Electrician with a strong background in chemical manufacturing facility. The ideal candidate will be responsible for the installation, maintenance, and troubleshooting electrical systems, including high-voltage distribution and industrial control systems. This role is critical to support aggressive growth and ensuring the continuous and safe operation of our machinery and facility infrastructure. The position requires a strong understanding of electrical systems, ability to work independently, and as a part of a team. Schedule: 6 am - 2:30 pm - 3 pm -11:30 pm Mon - Fri Hourly pay $43.00 **WHAT YOU'LL ACCOMPLISH** + Perform preventive electrical maintenance on all equipment to minimize downtime andensure optimal performance. + Troubleshoot and repair complex electrical and electronic systems, including programmable logic controllers (PLCs), motor control centers (MCCs), and instrumentation. + Read, interpret, and use complex industrial electrical schematics, blueprints, technical diagrams, and equipment manuals. + Ensure all work is performed in compliance with the National Electrical Code (NEC) and Wisconsin electrical codes. + Work with a variety of specialized tools and diagnostic equipment, such as multimeters, meggers, and oscilloscopes, to diagnose and repair electrical faults. + Install and maintain conduit, wiring, and electrical apparatus in a heavy industrial environment. + Collaborate with engineers, maintenance team, contractors, and production staff to identify and resolve electrical issues and support plant modifications or upgrades. **WHAT ARE WE LOOKING FOR** + Must hold a valid Wisconsin Journeyman Electrician License (Class B) or Master Electrician License (Class A). + Proven experience as an electrician in industrial setting, such as a chemical plant, power plant, or wastewater treatment facility. + Strong understanding of industrial control systems, instrumentation, motor control, and power distribution. + Proficiency in reading and interpreting complex electrical schematics and blueprints. + Demonstrated commitment to safety and a thorough understanding of NFPA 70E guidelines for working on and around energized equipment. + Ability to work in a physically demanding environment, including confined spaces and at heights. + Excellent problem-solving, communication, and teamwork skills. + Willingness to work on evening shift, frequent weekends, and/or on-call basis for emergency repairs, as needed. **Additional Requirements:** Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. **WHAT WE OFFER** + Competitive Compensation + Retirement Savings + Medical, Dental, Disability and Life Insurance Coverage + Holistic Health & Well-Being Programs + Health Savings Accounts (HSA) & Flexible Spending Accounts (FSA) for Health and Dependent Care + Vision and other Voluntary Benefits and Discounts + Paid Time Off and Holidays + Paid Parental Leave (Maternity and Paternity) + Educational Assistance Program \#AMRIND **BUILDING INCLUSIVE WORKSPACES** At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. **Nearest Major Market:** Waukesha **Nearest Secondary Market:** Milwaukee

Job Purpose Statement: Perform duties to maintain, repair and install a variety of electrical and electronic processing equipment instruments and controls, communications equipment and data transmission, security, lighting and HVAC systems. Reporting Structure: Supervisor, Electrical Maintenance and Assistant Supervisor, Electrical Maintenance. Essential Job Functions: 1. Complete scheduled preventive and corrective work orders and check with the Facility Supervisor and the Electrical Supervisor to prioritize the daily work. 2. Maintain and repair all installed electrical/electronic equipment including motors, controllers, generators, variable frequency drives, processing equipment, metering, monitoring and controlling devices, HVAC, lighting, security, communications systems, and external PLC circuitry. 3. Maintain, repair and/or install hydraulic and pneumatic control systems. 4. Troubleshoot, analyze, test equipment to diagnose the nature of the equipment malfunction. Perform necessary repairs, test and restore to operation. 5. Perform preventive maintenance, including checking fluid levels, drive belts and brushes. Test equipment for proper operation, cleaning slip rings and Eddy Current couplings and do thermal testing of contacts, bus bars and other electrical connections. 6. Install new equipment, conduit, wiring and connection boxes. Determine the parts required for proper installation and obtain them. Make electrical connections and test for proper operation. 7. Operate electrical power distribution system, including the emergency generators and 4160-volt switchgear. Parallel the 4160-volt generators with supplied power to test generator operation. 8. Modify and rewire installed electrical systems in accordance with engineering work orders and documents. Update existing drawings as required. 9. Design and build special test fixtures as needed. 10. Respond to emergency calls on a 24-hour basis. Maintain contact with the plants via phone during off-hours. On-call is required. 11. Perform other duties in a safe manner as assigned by immediate supervisor or other supervisors as required. Title: Instrument Repairer Department: Electrical Maintenance Physical and Visual Activities: Physical and visual activities that are commonly associated with the performance of the functions of this job. Standing, Walking, Sitting, Lifting, Carrying, Pushing, Pulling, Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Handling, Fingering, Feeling, Talking, Hearing, Acuity far, Acuity near, Depth Perception, Field of Vision, Accommodation, Color Vision. Heights and ladders. Physical Demands: Physical demands commonly associated with the performance of the functions of this job. Lift up to 1 lb up to 15% of the time, Over 1 lb up to 5 lbs over 70% of the time, Over 5 lbs up to 25 lbs over 40% up to 70% of the time, Over 25 lbs up to 60 lbs over 15% up to 40% of the time, Over 60 lbs up to 15% of the time. Environmental/Atmospheric Conditions: Environmental and atmospheric conditions commonly associated with the performance of the functions of this job. Inside, Outside, Both, Extremes of cold, Cold temperature changes, Extremes of hot, Hot temperature changes, Wet, Humid, Noise, Vibration, Hazards, Fumes, Odors, Toxic conditions, Dust, Poor ventilation. Knowledge: Use of electrical and electronic test equipment, i.e. (DMM's, oscilloscopes, signal generators), use of pipe bending equipment, (hand, mechanical, hydraulic) threading tools (hand, mechanical, electric), hand fish tapes and powered cable pullers, use of all related hand and power tools (drills, drill press, lathe, mill, belt and wheel grinders, air tools, bending brakes and shears). Ability to comprehend both oral and written instructions in the English language. High School graduate or equivalent. Post high school education in electricity and electronics, with several years of technical training beyond high school is strongly desired. (e.g. CLC, DeVry, Gateway Tech., M.A.T.C., etc.) Such training does not substitute for experience. Examples of Desired Knowledge: Familiarity with 5000-volt power distribution equipment, including proper splicing and termination procedures of shielded and unshielded high voltage cable. Knowledge of special safety considerations and techniques required when working at these voltage levels. Good working knowledge of hydraulic and pneumatic control systems and related electrical interfaces. Ability to analyze and interpret electrical ladder diagrams and electronic schematics to aid in trouble shooting, equipment installation and to determine if electrical operation is proper. A working knowledge of Programmable Logic Controllers (P.L.C.'s) and how to interface them with external electrical apparatus. Knowledge of plant operations and how their actions affect the overall operation of the process. Knowledge of standby electrical power equipment and how to safely and properly interface them with our power distribution systems. Title: Instrument Repairer Department: Electrical Maintenance Experience: Five years minimum in the industrial electrical/electronic field. Machines, Tools, Equipment (Office and Industrial), Software: Bench lathe, mill, break, shears, bolt and wheel grinders, drill press, air tools, personal computer. Variety of electrical and electronic test equipment, pipe bending and threading tools, hand power tools and hand tools, and related stationary power tools. PAPR/PPE and various safety equipment. Licenses/Certifications: n/a Other: Employees in this position shall be required to be legally authorized to operate a motor vehicle for work-related purposes in the State of Illinois. Random substance abuse testing is required for the position. This description should not be construed to contain every function/responsibility that may be required to be performed by an incumbent in this job. Incumbents are required to perform other related functions as assigned. The current starting pay rate for this position is $45.20/hour. The District offers the following benefits: Health and Dental Coverage (including Flexible Spending Accounts for Health and Dependent Care) Life Insurance Coverage Options for Disability Coverage Paid Time Off (PTO) Holiday Pay IMRF Pension and Other Retirement Plans Educational Assistance

Job Description Join a Leader in Industrial Manufacturing The Grieve Corporation, a trusted and innovative manufacturer of industrial ovens and furnaces based in Round Lake, IL, is looking for a skilled Electrician to become part of our growing manufacturing team. If you're seeking a stable career with a company that values craftsmanship, teamwork, and long-term growth, we'd love to meet you. **Key Responsibilities: ** Perform a variety of electrical and mechanical tasks, including layout, assembly, and wiring of control panels Install and mount electrical components such as motors, heaters, and valves Run conduit, gas piping, and air lines Balance motors and ensure optimal performance Troubleshoot and resolve electrical and mechanical issues **Qualifications: ** 3-5 years of electrical wiring experience, ideally within an equipment manufacturing environment Ability to read and interpret wiring diagrams Proficiency in reading and writing English Ability to lift up to 70 lbs. **What We Offer: ** Comprehensive Group Medical, Dental, Vision, and Life Insurance plans 401(k) Retirement Plan with company match 11 Paid Holidays Paid Vacation and Personal Days A supportive environment where your skills are valued and your growth matters EQUAL OPPORTUNITY STATEMENT: The Grieve Corporation is proud to be an equal opportunity workplace and is an affirmative action employer. You should be proficient in: Electrical Troubleshooting Skills Electrical Systems Diagnostics & Repair Electrical Troubleshooting Industrial Electrical Experience

Job Function: Industrial Electrician / TIG Aluminum Welder - 2nd Shift (Food) 5+ years of hands-on maintenance experience, specifically focusing on multi-phase industrial wiring and TIG Aluminum fabrication is required Must be ready to manage complex repairs and maintain food safety standards while working around common allergens as well Second shift: 1 PM - 9 PM(minimal overtime, fully paid) Pay is $33 to $38 per hour depending on experience (top of range includes PLC skills) plus a $3/hour shift premium Must be a United States citizen or Green Card holder No remote as this is a 100% onsite position Full-time, permanent, W-2 employee Full benefits Located in the Brookfield, Wisconsin area This growing food manufacturer is looking to hire a full time, permanent Industrial Electrician / TIG Aluminum Welder - 2nd Shift (Food). New capital projects including adding new manufacturing lines are on the horizon. There is excitement with the expansion the company is going through. The future is very bright for the company and the employees. They are looking to automate plant operations and are making large investments in the production lines. The company is experiencing growth and many career growth opportunities will become available. Employees are valued and treated very well. The successful candidate's duties and responsibilities will encompass the following: Perform preventive maintenance, troubleshooting, and repair of mechanical and electrical systems on production equipment Install and upgrade machinery and equipment to support production efficiency, safety, and reliability standards Collaborate with cross-functional teams to minimize downtime and ensure smooth production flow Maintain accurate records of work performed and follow all safety, cleanliness, and regulatory protocols, including food safety guidelines The background of the successful candidate must include the following to be considered for this position: 5 years of industrial machine and fabrication maintenance, troubleshooting and repair as well as TIG Aluminum experience Possess the ability to wire two-phase, three-phase and four-phase electric Possess the ability to work weekdays from 1 pm to 9 pm plus minimal overtime Possess a solid work history Being a US citizen or green card holder Having a residence within a 45-minute drive Please apply here or at impactsolutions.com/opportunities where you can see and apply for any of our open positions.

Appleton Electric, a growing metal casting foundry in South Milwaukee, WI is looking a Maintenance Electrician to join our 3rd shift team. This role plans, installs and repairs electrical fixtures, equipment issues and failures and control equipment like switches, relays and distribution panels. The rate of pay ranges from $27. 91/hour to $42.32/hour plus a $.75/hour shift differential. Some of the benefits for this position include overtime on hours worked over 8 hours in a day, prorated two weeks' vacation and up to 12 weeks of paid parental leave. In This Role, Your Responsibilities Will Be: Conduct all job duties with Safety as a priority and in compliance with Safety Rules. Read and use process sheets, control panels and other relevant quality documents. Installation of conduit and wiring for power distribution, lighting and machine or equipment controls. Build or modify control panels. Reviewing job orders to determine work priorities. Who You Are: You understand the importance of working safety. You are a team player who is focused on quality. For This Role, You Will Need: Strong electrical abilities with good problem solving capabilities Understanding of PC's and HMI's Mount and dismount fork trucks, scissor lifts, and boom lifts Ability to work independently and in a team environment when required Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

Global Power Components is a privately held, growing manufacturer of UL heavy gauge steel fuel tanks, trailers, large generator enclosures and modular metal enclosures for housing fully equipped electrical distribution and control equipment. We are seeking motivated Maintenance Electrician to repair CNC & welding machines If you are looking for an organization that is busy, growing with stable consistent work where OT is always available but NOT mandatory, then Global Power Components is the place to be! Core Responsibilities: Maintenance of various CNC machines, Press Brakes, powder coating lines, welding cells, and other equipment Maintaining asset reliability to a high standard Utilizing a CMMS for enabling efficient maintenance and repair operations Electrical troubleshooting and maintenance of equipment and facilities as needed Equipment lubrication, filter changes and standard preventative maintenance Equipment troubleshooting in machine breakdown situations Highlighting any faults or damage to the machine, guarding or tooling Working closely with machine operators to identify potential issues prior to failure Utilizing safe work practices Requirements: Computer literate Manufacturing experience Able to read blueprints and schematics Able to troubleshoot and problem solve Must be highly motivated Able to communicate and work well with others Must pass competency test, and pre-employment physical including drug screen 2+ of experience with machine maintenance in a CNC environment Previous experience in sheet metal fabrication a plus Experience in troubleshooting, dismantling, and repairing a variety of machinery including CNC equipment Strong background in mechanical and electrical maintenance Ability to read and interpret a variety of blueprints, schematics, and documentation. Equal Opportunity Employer/Minorities/Women/Veterans/Disabled Global Power Components is an Equal Opportunity and Affirmative Action Employer. Global Power Components is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Qualifications: Requires an electrical journeyman card, or Associate's degree from technical college in related field and six months to one year related experience, or equivalent combination of education and experience. Work experience or training which demonstrates advanced knowledge of single and 3-phase electrical systems, AC and DC circuits and their relationship with each other. Basic welding and machine shop skills necessary to repair or fabricate repairs. Responsibilities: Troubleshoots and repairs control circuitry, hydraulic and pneumatic systems. Works from schematic and ladder diagrams involved in NC and CNC equipment. Moves and installs machine shop/fabrication equipment. Install switches, controls and other electronic devices incidental to the installation. Proficiently uses electrical measuring equipment to diagnose machine failures. Diagnose and remedy troubles, repair and replace equipment and apparatus and communicates the current status of equipment to the Production Manager and appropriate Department Supervisor. Work is subject to final inspection and check by supervisor.

Facility Maintenance/Electrician- Entry Level Reports to: Store Operations Type: Non-Exempt Summary: Facility Maintenance Technician - 1 is responsible for assisting the team with ongoing preventative maintenance and repair work of facility mechanicals, electrical and other systems to ensure the efficient operation and maintenance of all Stein facilities, providing a safe, clean and welcoming environment for our customers and associates. Essential Duties and Responsibilities include the following. Other duties may be assigned to meet business needs. Perform routine maintenance activities, including but not limited to: electrical, IT cable and device installation, carpentry, welding, masonry, plumbing, HVAC, roof maintenance and all other facility related activities under the supervision and direction of higher-level technicians and the Director of Operations. Assist in evaluating jobs to be completed, if work exceeds skill level, recommend to the Director of Operations alternative solution. Complete and execute tasks and work orders efficiently, accurately and timely. Maintain cleanliness and organization of assigned maintenance areas. Proactively communicate verbally and/or written any maintenance issues or potential hazards to the Director of Operations promptly. Ensure all maintenance tools and equipment are properly stored and in good working condition. Follow and comply with all safety protocols, work rules, trainings and regulations, to include providing guidance and enforcement of safety procedures and practices. Gain knowledge to understand and appropriately use OSHA lock out/tag out requirements and other applicable requirements. Contribute and assist with new store set-up and store refreshes of all Stein locations when needed. Complete other special projects as assigned. Employment Requirements: High school diploma or equivalent. Prior experience in maintenance or a similar role is preferred, but not required. Basic knowledge of maintenance tools and equipment. Strong attention to detail and a proactive approach to problem-solving. Ability to learn quickly and take advantage of available resources. Good verbal/written communication skills and the ability to work well in a team environment. Self-motivated, safety minded, resourceful, with the ability to work independently and with a team. Must possess the ability to interact professionally with many levels in and out of the organization in order to become a trusted resource within the organization. Valid and MVR acceptable driver's license, including insurable, with the ability to drive to all Stein locations for assigned projects with a flexible schedule to meet the demands. Some limited overnight travel may be necessary. Must be forklift and scissor lift certified within 3 months of employment. Physical Demands: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is frequently required to sit and stand; reach with hands and arms; walk and talk or hear. The associate is occasionally required to climb or balance; stoop, kneel, crouch or crawl. The associate must frequently lift and/or move up to 3 pounds and occasionally lift, push, pull and/or move up to 50 pounds. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Full-time Description Reliable Electric and Lighting, INC. Reliable Electric and Lighting, Inc. is a National Electrical and Lighting Company and was founded in 1996 to meet the lighting maintenance and electrical service needs of diverse facilities, evolving from humble beginnings to a national provider with over 100 employees, 40 service vehicles, and aerial lifts. Our commitment extends beyond delivering quality lighting and electrical services; we prioritize our employees, fostering a workplace where growth, respect, and collaboration thrive. Recognizing the integral role our team plays, we ensure that every member of Reliable Electric and Lighting Inc. is valued and supported, contributing to the ongoing success of both our company and the services we provide. Our Culture Our company culture is a dynamic blend of responsiveness and support, exemplified by our dedicated management team. We prioritize a partnership approach, placing a strong emphasis on meeting the needs of our valued employees, especially our field technicians. This collaborative ethos extends beyond internal dynamics, with a primary focus on seamlessly servicing our clients. In our workplace, responsiveness, support, and a shared commitment to client satisfaction are the cornerstones of our success, creating an environment where every team member is empowered to thrive. Responsibilities: • Install electrical wiring, circuits, panels, switches, lighting systems, and other electrical components in commercial buildings such as offices, retail stores, and industrial facilities. • Identify wiring routes, equipment placements, and circuit configurations based on project specifications. • Diagnose and repair malfunctioning electrical systems, including wiring, circuits, switches, breakers, and lighting systems. • Replace faulty wiring, breakers, fuses, and other electrical components to restore system functionality. • Respond to emergency electrical issues, providing immediate repairs to minimize downtime or safety risks. • Ensure that all electrical work adheres to the National Electrical Code (NEC) and local building codes. • Maintain accurate records of installations, repairs, and maintenance performed on electrical systems. • Communicate effectively with clients, property managers, or building owners about the scope of work, electrical issues, and progress updates. • A Commercial Journeyman Electrician plays a key role in ensuring that commercial electrical systems are functional, efficient, and safe for the building's occupants and operations. Requirements Valid Journeyman Electrician License or equivalent experience. Minimum 5 years of commercial/industrial electrical experience Proven experience troubleshooting and repairing commercial electrical systems . Ability to work independently and manage tasks in the field with minimal supervision. Able to respond to emergency service calls. Skilled in Trouble Shooting Electrical Systems Valid driver's license with a clean driving record. OSHA 10/30 certification (or willingness to obtain). Ability to lift up to 50 lbs and work in varied site conditions. Salary Description $30.00 - $45.00 per hour

** Mechanic/Electrician 3rd shift **Pay Rate:** $46.54/Hr + $0.26 Shift Differential **Category/Shift:** Hourly Full-Time (3 p.m. to 11 p.m. - Monday-Friday) **Physical Location:** Des Plaines Container 100 E. Oakton St. Des Plaines, IL **The Job You Will Perform:** Industrial maintenance/mechanic electrician will perform routine preventive maintenance and repair of machines. Troubleshoot emergency maintenance on machines as necessary to support plant operations. Troubleshoot industrial, electrical, hydraulic, pneumatic and mechanical failures Reads, manages and performs work orders of required maintenance services. **The Skills You Will Bring:** 3+ years in industrial manufacturing PLC troubleshooting, inputs/outputs, and changeouts of programs Experience with Factory Talk or similar HMI software Photo eyes, sensors, limit switches, and solenoids Repairing and troubleshooting conveyor systems (line controls) Mechanical Systems (bearings, chains, sprockets, gearboxes) Hydraulics & Pneumatics High and Low Voltage Ability to operate a multimeter to diagnose a variety of electrical issues Occasionally lift and/or move up to 50 pounds Frequently required to stand; walk; use hands to handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. **The Benefits You Will Enjoy:** International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement), and Voluntary Benefits including insurance for home, auto, vision and pets. **The Career You Will Build:** Promotional Opportunities Leadership Development Professional Development **The Impact You** **Will Make:** We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 120 years. Join our team and you'll see why our team members say they're Proud to be IP. **The Culture You Will Experience:** International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. **The Company You Will Join:** International Paper (NYSE: IP) is a leading global supplier of renewable fiber-based products. We produce corrugated packaging products that protect and promote goods, and enable worldwide commerce, and pulp for diapers, tissue and other personal care products that promote health and wellness. Headquartered in Memphis, Tenn., we employ approximately 38,000 colleagues globally. We serve customers worldwide, with manufacturing operations in North America, Latin America, North Africa and Europe. Net sales for 2022 were $21.2 billion. Additional information can be found by visiting InternationalPaper.com. International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or ************** **Job Identification** 1082556

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family!Maintenance Electrician - Power Up Your Career! Pay Range: $35.25 - $44.00/hr Based on experience Shift: 2nd Shift | Monday-Friday | 2 PM - 10 PM Hiring Bonus: $5,000 after 90 days Join Our Team at Charter Dura-Bar! We're seeking a highly skilled Maintenance Electrician to keep our operations running at peak performance. If you're an expert in electrical systems, troubleshooting, and industrial maintenance, this is your opportunity to shine in a safety-first environment. Why You'll Love Working Here Competitive Pay + Quarterly Bonuses + Profit Sharing Weekly Paychecks Comprehensive Benefits: Medical, dental, vision, 401(k) match, PTO Growth Opportunities: Your expertise + our training = success Stability: Join a Midwest company with four generations of family ownership What You'll Do Install, maintain, and troubleshoot electrical systems and plant equipment Perform advanced diagnostics and preventive maintenance Layout and install complex wiring circuits and control panels Support equipment setups to maximize uptime What You'll Bring High School Diploma or GED Accredited maintenance apprenticeship or technical training + experience 3-5 years industrial electrician experience Knowledge of NEC, NFPA-70E, PLCs, drives, motors, and power distribution Ability to read wiring diagrams and schematics Strong troubleshooting skills and safe equipment operation Preferred: Advanced PLC programming (Allen Bradley, Siemens, GE) Experience with hydraulics, pneumatics, and automated systems Foundry or heavy industrial environment experience Ready to put your skills to use as a Maintenance Electrician? Apply today and start your journey with Charter Dura-Bar in Woodstock, IL! #appcast500 The entry hourly rate for this position is $35.25 per hour. The actual base pay offered to the successful candidate will depend on various factors, including but not limited to job-related skills, experience, and qualifications. Compensation decisions are tailored to the unique circumstances of each position and candidate.We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

Roman Electric Co., Inc. | Southeastern Wisconsin Union Pay • Union Benefits • Steady Work Roman Electric Co., Inc. is a union electrical contractor seeking an experienced Commercial Service Electrician (Journeyman) to join our service team. This role focuses on commercial service and troubleshooting-not large construction Who This Is For Licensed Journeyman Electricians looking to move out of large construction jobs and who prefer service work, troubleshooting, and variety Industrial or Maintenance Electricians wanting variety Those who want predictable schedules and steady hours Electricians who value union pay, union benefits, and long-term stability Professionals who take pride in diagnosing problems, want to run their own calls and can be trusted to do the job right projects. Why the IBEW? Top-of-the-industry hourly wages Employer-paid family health insurance and HRA Employer-funded retirement, 401(k), and pension Paid vacation and holidays State-approved training and ongoing education What You'll Do Run your own commercial service calls Troubleshoot and repair electrical systems Work independently with minimal supervision Interact professionally with customers Complete service documentation accurately What We're Looking For 5+ years of electrical experience State of Wisconsin Journeyman Electrician License (required) Commercial service experience preferred Strong troubleshooting skills Valid driver's license and clean driving record Why Roman Electric Predictable schedules and consistent hours Minimal after-hours and emergency work Trusted autonomy-no micromanagement Year-round union work All-in package wage is up to $87.62/hr

SURESTAFF is immediately hiring an Maintenance Electrician for a client in Carpentersville, IL. The Maintenance Electrician will perform complex technical work in the installation, operation, maintenance, modification, service and repair of electrical systems, equipment, fixtures and related systems. Install, repair, and maintain machinery and facility SURESTAFF is invested in their team members! All temp-to-hire employees are offered competitive compensation ($25/hr) as well as a benefits package including health insurance (medical, dental, and vision). Available shifts include: 6am-2:30pm Responsibilities of the Maintenance Electrician: Lead projects General upkeep of a building's electrical system Routinely inspect electrical systems such as wiring on facility and machines Troubleshoot manufacturing and maintenance problems and implement quality solutions. Repair, install, adjust or maintain machines and equipment. Fix faulty wiring Schedule and perform routine preventative maintenance. Inspect machines regularly for signs of malfunctions. Read technical diagrams and blueprints. Help maintain spare parts inventory. Adhere to safety standards Requirements and Qualifications: 5+ years of manufacturing experience. Mechanical experience a plus. Proven work experience as a Maintenance Electrician Familiarity with industrial electrical systems and the National Electrical Code Skills must include problem solving, teamwork, and good communication. Must be able to lead a team Ability to act competently in emergencies Work effectively with other team members. Must be able to stand or walk for extended periods and routinely lift items up to 50 pounds About Surestaff At Surestaff, we are dedicated to helping individuals unlock their career potential through meaningful job opportunities. As a leading staffing agency in the light industrial and manufacturing space, we pride ourselves on connecting talent with top employers across the Midwest and Southeast. With an estimated yearly revenue of $295 million, Surestaff was recently named one of the largest staffing firms in the U.S. by Staffing Industry Analysts (SIA). We understand that finding the right job is about more than just a paycheck - it's about finding the opportunity that fits your skills, goals, and lifestyle. Here are the benefits you'll enjoy when you partner with us: Access to a wide range of job opportunities Competitive pay Health and Wellness Programs (including EAP) Medical benefits including medical, vision, dental, and prescriptions Electronic weekly pay Employee Advocacy & Personalized Job Support Surestaff also follows all applicable state and local laws regarding sick time, paid time off, and retirement savings programs. Surestaff is an equal opportunity employer. Notice Regarding the Use of Artificial Intelligence in Employment DecisionsIn accordance with state mandates, we are providing this notice to inform all applicants and employees that artificial intelligence (AI) tools may be used at various stages of our employment processes. This may include recruitment, screening, hiring, promotion, or other employment?related evaluations.AI tools may assist in reviewing application materials, assessing qualifications, or supporting decision?making. These tools do not replace human judgment; rather, they are used to support consistent and efficient evaluation. Our commitment to speed-to-hire means we work efficiently to get you placed in the right role, fast. If you're ready to take control of your career, explore exciting opportunities, and gain experience that lasts, then Surestaff is the place for you. Let's get started today!

Maintenance / Electrical Technician - 1st Shift Schedule: Monday-Friday, 7:00 AM or 8:00 AM start · End time 3:00-4:00 PM Compensation: $25/hour (Based on experience) Employment Type: Full-Time Position Overview:We are seeking a skilled Maintenance/Electrical Technician to join our maintenance team. This role is essential to ensuring the safe, reliable, and efficient operation of our facility and critical production equipment. Every part we produce is a safety-critical component, making quality, precision, and attention to detail vital to this position.The ideal candidate will have strong mechanical aptitude, hands-on electrical experience, and the ability to adapt to a variety of daily tasks-from routine maintenance to troubleshooting unexpected issues. Key Responsibilities: Perform routine, preventative, and corrective maintenance on production and facility equipment. Troubleshoot electrical systems up to 48-volt, 3-phase power. Diagnose mechanical issues and execute repairs to minimize downtime. Support HVAC maintenance (experience is a plus). Ensure all work meets the highest quality and safety standards, especially given that all parts produced are safety-critical. Document maintenance activities and communicate equipment needs or concerns to leadership. Assist with seasonal tasks and unexpected maintenance challenges as they arise. Contribute to a positive, respectful, and collaborative work environment. Maintain excellent attendance and a professional attitude while working closely with teammates. Qualifications: Minimum 2 years of relevant work experience in maintenance, mechanical, or electrical roles. Strong mechanical aptitude with the ability to diagnose and solve technical issues. Experience with 48-volt 3-phase electrical systems required. HVAC experience is a plus. Commitment to producing high-quality workmanship with attention to safety at all times. Willingness to continually improve skills and learn new techniques. Reliable, punctual, and able to work independently or as part of a team.

Job DescriptionDescription: Now Hiring: Controls, Automation & Electrical Technician | 3rd Shift Schedule: 10:00PM - 6:00AM Pay: Base + Shift Differential = $38.50/hour (+ based on experience) Why join our team?? Need cash before payday? We've got you covered with on demand pay Quarterly bonuses (based on team achievement and up to 6% of wages) Full benefits package - medical, dental, vision & 401(k) match Generous PTO & holidays Growth opportunities to expand skillsets and enhance career Amazing team & culture focused on: Communication | Community | Wellness | Employee Activities Other Benefits & Programs We Offer: Full-time & stable hours - no seasonal cuts! Referral bonus program Tuition reimbursement HSA Medical plan option with annual company contribution Perks at Work - discounts on shopping, travel & more Proven continued business growth for future opportunities What You'll Do Troubleshoot and maintain PLCs, HMIs, VFDs, and robotic systems. Diagnose and repair electrical wiring, sensors, and instrumentation. Support automation upgrades, commissioning, and continuous improvement. Ensure documentation accuracy and compliance with safety and FDA standards. Requirements: What You'll Need 2+ years in industrial automation, controls, or electrical systems. PLC programming/troubleshooting (Allen-Bradley preferred). Experience with instrumentation, schematics, and motion control. Strong safety focus and teamwork mindset. Bonus: Experience with Beckhoff, Fanuc, or vision systems. About Us Gehl Foods is a fast-growing food and beverage manufacturer, known for ready-to-serve products like nacho cheese and protein shakes-no refrigeration needed! We lead with safety, quality, and teamwork in everything we do. Feed your future at gehlfoodandbeverage.com Gehl Foods is proud to be an Equal Opportunity Employer.

" Mechanic/Electrician 3rd shift Pay Rate: $46.54/Hr + $0.26 Shift Differential Category/Shift: Hourly Full-Time (3 p.m. to 11 p.m. - Monday-Friday) Physical Location: Des Plaines Container 100 E. Oakton St. Des Plaines, IL The Job You Will Perform: Industrial maintenance/mechanic electrician will perform routine preventive maintenance and repair of machines. Troubleshoot emergency maintenance on machines as necessary to support plant operations. Troubleshoot industrial, electrical, hydraulic, pneumatic and mechanical failures Reads, manages and performs work orders of required maintenance services. The Skills You Will Bring: 3+ years in industrial manufacturing PLC troubleshooting, inputs/outputs, and changeouts of programs Experience with Factory Talk or similar HMI software Photo eyes, sensors, limit switches, and solenoids Repairing and troubleshooting conveyor systems (line controls) Mechanical Systems (bearings, chains, sprockets, gearboxes) Hydraulics & Pneumatics High and Low Voltage Ability to operate a multimeter to diagnose a variety of electrical issues Occasionally lift and/or move up to 50 pounds Frequently required to stand; walk; use hands to handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The Benefits You Will Enjoy: International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement), and Voluntary Benefits including insurance for home, auto, vision and pets. The Career You Will Build: Promotional Opportunities Leadership Development Professional Development The Impact You Will Make: We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 120 years. Join our team and you'll see why our team members say they're Proud to be IP. The Culture You Will Experience: International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. The Company You Will Join: International Paper (NYSE: IP) is a leading global supplier of renewable fiber-based products. We produce corrugated packaging products that protect and promote goods, and enable worldwide commerce, and pulp for diapers, tissue and other personal care products that promote health and wellness. Headquartered in Memphis, Tenn., we employ approximately 38,000 colleagues globally. We serve customers worldwide, with manufacturing operations in North America, Latin America, North Africa and Europe. Net sales for 2022 were $21.2 billion. Additional information can be found by visiting InternationalPaper.com. International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or ************** "

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Charter Wire is a leading Tier 1 supplier and manufacturer of Engineered Shaped Wire, Cold Finished Bar, and Cold-Headed and Stamped Components to various industries, including Automotive, Agriculture, Construction, Consumer, Industrial, and Oil & Gas. Charter Wire is a member of the Charter Manufacturing family of companies. Why Work Here: BENEFITS: Access great benefits like medical, dental, vision, 401(k) match, and paid time off. GROWTH: Expand your skills with on-the-job training, process improvement opportunities, and internal advancement-we promote from within. SAFETY: Work in an environment committed to safety and continuous improvement. STABILITY: Join an established Midwest company with four generations of family ownership. Position specifics: Location: Charter Wire - 3700 W Milwaukee Rd, Milwaukee, WI 53208 Shift: 6pm - 6am on a rotating 3-2-2-3 schedule (3 days working - 2 days off - 2 days working - 3 days off, giving you a 3-day weekend off every other weekend) What You'll Do: As an Electromechanical Technician, you'll play a critical role in maintaining, troubleshooting, and repairing production machinery. You'll work with both mechanical and electrical systems across high-speed stamping presses, cold forming machines, and automated equipment in a dynamic production environment. Maintain and troubleshoot electromechanical equipment using hand tools, welding equipment, and measuring devices Perform preventive maintenance to reduce downtime and ensure equipment reliability Diagnose and resolve issues using technical documents such as blueprints, schematics, and manuals Collaborate with cross-functional teams to support continuous improvement Follow safety protocols and use appropriate PPE Support process improvements and participate in ongoing training MINIMUM QUALIFICATIONS: High School Diploma or GED equivalent. (GED Works program eligible) Basic mechanical and maintenance aptitude. Ability to use basic math skills. Ability to read and understand and follow operating and maintenance instructions. Good written and verbal communication. Ability to work well with other employees. Nice to Haves: Experience with PLCs and drives (Allen Bradley, Siemens) Familiarity with AC/DC motors, HVAC, and hydraulic/pneumatic systems Experience with welding/torch equipment and precision measuring tools Excellent communication and teamwork skills Problem-solving mindset and eagerness to keep learning Physical Requirements: Frequent standing and walking Occasional sitting, reaching, forceful motion, and lifting up to 60 lbs Minimal climbing and lifting over 100 lbs Ability to meet physical demands with or without reasonable accommodation Ready to put your mechanical and electrical expertise to work? Apply today and grow your career with Charter Wire. We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).