Industrial engineer jobs in Hartford, CT - 354 jobs

As a family-run, high-tech company with nearly 19,000 employees at 71 locations worldwide, we are looking for forward thinkers with unconventional ideas and drive to join our team. Our company culture, which values collaboration and mutual trust, creates the ideal framework for boldly trying new things and questioning the status quo. Our technologies inspire people to develop and produce things that are currently unimaginable. Whether lasers, machine tools, EUV or electronics - TRUMPF is building technological worlds for future generations. Are you ready for new challenges? The Project Engineer, Lean Manufacturing responsible for the development and implementation of processes, improvements and new technologies in TRUMPF production units. General project management, coordination and management of specific assignments is required while applying known lean manufacturing, SYNCHRO and quality management tools to improve process accuracy and efficiency. This position is onsite at the Farmington, CT location Project Engineer, Lean Manufacturing Responsibilities Develop project plans while incorporating both short and long term strategies for the production of new products Manage project team activities, communicate changes and progress to team members, and report and escalate to upper management as needed Maintain comprehensive project documentation via data and reports to track project progress, perform risk analyses, monitor work to ensure quality and implement process improvements. Meet productivity standards, complete projects on time and budget, and display commitment to excellence Manage multiple projects and project teams, e.g. process improvement projects, investment projects, cost saving projects Assist in the implementation of Strategic Production Planning, Product Transfers, Plant Layout, Continuous Process Improvement and Lean Manufacturing following SYNCHRO principles. Support SYNCHRO activities and improve product flow by implementing standardized procedures and structures including value stream mapping of process flow through different department areas Experience One-to-three years' previous experience in project management, supply chain, procurement or industrial engineering preferred. Must have strong working knowledge of project management, lean manufacturing principles and manufacturing equipment and processes. Strong communication, negotiation and interpersonal skills, ability to work under pressure, strong analytical and conceptual skills, and high self-confidence are a must. Must be able to handle multiple projects simultaneously. Must be organized, flexible, must take initiative and have the ability to work independently as well as on a team. Strong working knowledge of MS Office applications, especially Excel, Word, and PowerPoint, is required; SAP knowledge is a plus. Education Bachelor's degree in Industrial Engineering and/or other business, engineering, or related field required. Master's degree in engineering or related field preferred. TRUMPF Inc. endeavors to make TRUMPF careers pages accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance in completing the applications process, please contact our HR department at or at contact information is for accommodation requests only and can not be used to inquire about the status of application.

We are seeking a highly motivated Process Engineer to lead and support our assembly operations with a strong focus on process optimization, automation, and Lean manufacturing. The ideal candidate will play a critical role in driving operational excellence, improving assembly line performance, and leading continuous improvement initiatives to enhance safety, quality, delivery, and cost. Responsibilities Develop and optimize assembly processes, ensuring alignment with quality, productivity, and cost targets. Identify and implement automation opportunities (robotics, vision systems, material handling, etc.) to increase efficiency and reduce manual labor. Collaborate with cross-functional teams including design, quality, maintenance, and operations to launch new products and processes into production. Facilitate continuous improvement initiatives using Lean tools such as Kaizen, 5S, Standard Work, SMED, Value Stream Mapping, and Root Cause Analysis. Analyze and resolve process issues through structured problem-solving (e.g., DMAIC, 8D, PDCA). Develop and maintain process documentation, including work instructions, process flow diagrams, PFMEAs, and control plans. Monitor KPIs such as cycle time, OEE, scrap, and downtime; identify trends and take corrective actions. Champion Lean culture within the organization by training, mentoring, and engaging team members at all levels. Evaluate new equipment and technologies; develop business cases and support capital projects from concept through implementation. Ensure compliance with safety, quality, and environmental standards in all process engineering activities. Qualifications Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering or related field. 2+ years of experience in process or manufacturing engineering, preferably in a high-volume assembly environment. Knowledge of assembly tooling, fixtures, and workstations. Proficiency in using engineering tools such as AutoCAD/SolidWorks, Excel (advanced), and statistical analysis software (e.g., Minitab).

**_About_** **_this_** **_position_** ** As **Manager Industrialization & Scale‑Up** , you will be the global process owner for the industrialization and scale‑up of adhesive technologies. You will define, standardize, and govern the global scale‑up framework across regions, technologies, and strategic business units, ensuring robust handover from lab to production with reduced risk and accelerated time‑to‑market. You will drive best‑practice execution, improve right‑first‑time performance, and build global capability through training and knowledge sharing. **What you´ll do** **Global Industrialization & Scale‑Up Leadership** + Own the global industrialization and scale‑up process, including standardized steps, deliverables, and decision gates applied across regions, technologies, and SBUs. + Ensure robust and consistent scale‑up from laboratory, through pilot plant, to full production. + Act as global process owner for the Adhesives Development Process (ADP), ensuring disciplined process documentation and execution. **Cross‑Functional Collaboration** + Partner with Global AO Pilot Plant Heads, Product Development Heads, and Operations leadership to align scale‑up activities with technology standards and long‑term manufacturing strategy. + Drive reduction of scrap, increase scale‑up success rates, and improve release performance metrics. + Support cross‑regional teams in troubleshooting, problem resolution, and process optimization. **Standardization, Best Practices & Continuous Improvement** + Lead the global standardization of industrialization practices and facilitate best practice replication across regions and sites. + Champion continuous improvement initiatives to enhance robustness, efficiency, and time‑to‑market. + Capture and disseminate learnings to build a culture of operational excellence. **Capability Building & Knowledge Management** + Develop and deploy global training programs and eLearning materials to upskill the organization on scale‑up and ADP processes. + Support development of aligned documentation, process flows, SOPs, and decision gate criteria. + Track, analyze, and report key performance indicators such as scale‑up success rate, costs, and lead‑time improvements. **What makes you a good fit** **Education & Experience** + Master's degree in Chemical Engineering, Process Engineering, or equivalent. + 7+ years of experience in process development, scale‑up, industrialization, or related roles. + Experience with multi‑site global projects and working in international, matrixed environments preferred. **Key Skills & Competencies** + Strong expertise in process engineering, industrialization, and technical scale‑up methods. + Analytical, structured, and strategic mindset with excellent problem‑solving ability. + Experience using digital tools for simulation, process control, and data‑driven performance tracking. + Comfortable working in cross‑functional teams and influencing across organizational levels. + Lean mindset with a focus on standardization and operational excellence. + Effective communication skills in English; additional languages are a plus. At Henkel, we come from a broad range of backgrounds, perspectives, and life experiences. We believe the uniqueness of all our employees is the power in us. Become part of the team and bring your uniqueness to us! We welcome all applications across different genders, origins, cultures, religions, sexual orientations, disabilities, and generations. **JOB ID:** 25089972 **Job Locations:** Brazil, São Paulo, São Paulo | Germany, North Rhine Westphalia, Düsseldorf | Netherlands, North Holland, Amsterdam | United Arab Emirates, Dubai, Dubai | United States, CT, Rocky Hill, CT **Contact information for application-related questions:** ********************************* Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

**_What Industrial Engineering contributes to Cardinal Health_** Engineering is responsible for performing research and analyses to develop design options for components, products, systems and processes. Industrial Engineering is responsible for enhancing / developing processes, layout and associated tools. Identifies, analyzes and implements new or existing technology to optimize business processes. Designs process improvements to reduce cost, cycle time, improve quality and/or increase throughput. Directs external resources / contractors as required. The Principal Industrial Engineer supports Pharmaceutical Supply Chain Operations in the areas of capital project planning and management, capacity planning, operational process change, and overall distribution center operating layout optimization. The position will also support deployment of new process and automation solutions, facilitate new building designs and layouts changes. Additional responsibilities include partnering with Operations leaders, deploying capital project investments for Pharma Supply Chain Operations, and overseeing project implementation and adoption to realize improvements. **_Responsibilities_** + Drive process engineering initiatives including conceptual operational designs, layout-change scenarios, and innovative automation solutions. Work closely with business operations partners to iterate on solutioning to optimize results. Bring modernization concepts to Operations through material handling and engineering external partnerships. + Works closely with Pharmaceutical Supply Chain Operations Vice Presidents, and site leaders to manage capital projects planned within the buildings. Develops capital budget priorities, establishes preliminary budgets,business case justifications, and formalizes all capital requests for budgeted, approved, or newly scoped projects. + Leads multifunctional teams of stakeholders and contributors to deliver large complex projects on time and under budget.Coordinates with other functional groups including Corporate Real Estate,field operations, Security, Information Technology, Inventory, Quality & Regulatory, Sales,and EH&S to ensure efforts are aligned, and coordinated as projects are developed and analyzed. + Integrated team members supporting operations leadership teams to ensure that capital projects and infrastructure are deployed, coordinated, managed, and maintained to drive building performance expectations. This role also manages and executes small construction projects independent of Corporate Real Estate / Construction including all cage and vault construction resulting from expansion or relocation needs. **_Qualifications_** + Bachelor's Degree in related field or relevant work experience, preferred + 4-6 years of experience in Operations, project and budgetary management, capital investment analysis and deployment, leading complex projects with multi-functional teams, preferred + Experience with automation solutions, facility design, material handling systems, integrated warehouse controls and execution applications, preferred + Experience with AutoCAD and other software applications to drive warehouse design and concepting, preferred + Strong Leadership skills, Strong scheduling and organizational skills + Excellent technical problem-solving capability + High level of initiative - Team player + Willing and transparent communicator + Proficient with Microsoft Office Suite + Excellent written and verbal communication skills + Moderate travel to other facilities for projects and supervision of equipment installation (25%, up to 50% during specific deployment activities and project implementations) **_What is expected of you and others at this level_** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **Anticipated salary range:** $94,900 - $135,600 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 3/13/2026 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country, or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. Are you ready to go beyond? **Responsibilities:** + Study product requirements and determine capital equipment and labor staffing to meet requirements. + Conduct machine capacity analysis and identify/manage improvement initiatives to increase efficiency (OEE). + Develop methods to increase productivity, maximize efficiency and manage human capital more effectively. + Recommend capital investment strategy to meet product delivery and cost targets. + Evaluate the effects of schedule and product design changes. + Design layouts of equipment and workspace and improving process flow. + Ability to prioritize many details into a broad view of the total organization. + Knowledge of manufacturing and assembly processes. + Ability to work effectively with other engineers, technicians, operators, and management. + Understanding of capital acquisition process + Strong analytical, creative thinking and project management skills. + Strong time management skills, ability to multi-task and adaptable to changing priorities. + Working knowledge of product manufacturing / process technologies. + Participating in and leading Kaizen events. **Qualifications You Must Have:** + Bachelor's Degree in Industrial Engineering, Manufacturing or Operations. + Typically requires a University Degree or equivalent experience and no less than 2-4 years prior relevant experience. + Data mining & manipulation experience with Excel, VBA, SQL, other methods. + US Citizenship is required due to government contracts. **Learn More & Apply Now:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Responsible for evaluating existing processes and configuring manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process. Responsibilities - Identify, develop and implement optimizations and improvements to all phases of the production process. - Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and quality. - Implement new products launches into production. - Develop innovative solutions. - Review and analyze current processes, identify bottlenecks, and gather data to pinpoint areas for improvement. - Improve process capability and production volume while maintaining and improving quality standards. - Plan, facilitate, and execute continuous improvement projects, often using methodologies like Lean or Six Sigma - Prepares product and process reports by collecting, analyzing, and summarizing information and trends. - Identifies inefficiencies in business processes and implements changes to increase productivity and reduce costs - Coach and lead cross-functional teams through the implementation of new processes and tools - Collect and analyze data to measure the effectiveness of changes and document all process updates and standard operating procedures (SOPs) - Create ROIs and reports, and present findings and recommendations to management - Work collaboratively with engineering and quality during incident investigations. - Advise on and implement corrective actions. - Update procedures and work instructions as needed. - Research and purchase new manufacturing technology. - Work with Partner/Operations, Partner/Research & Development and Operations Manager on capital equipment investment justification. - Ensure projects are completed on time. - Ensure financial budgets are followed. - Some travel required as needed. - Performs duties in other areas as needed Education & Qualifications - B.S. degree in Mechanical or Manufacturing engineer required - Minimum 5 years related experience required - Proven Continuous Improvement Experience preferred - Six Sigma Green Belt or Black Belt preferred - Prior supervisory experience highly desirable - Project Management: ability to organize and manage multiple projects - Experience with Kaizen and other Lean manufacturing techniques - CAD proficiency - Experience with problem analysis and resolution - Demonstrated ability to achieve results independently or working with others - Requires good leadership skills and communication skills - Ability to recommend and implement improvements Equipment Used Computer, telephone, smartphone, Microsoft office, Excel Note 1) The above statements are intended to describe the general nature and level of work being performed by people assigned to the classification. They reflect the essential elements and general responsibilities of the position, but are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. 2) The performance of all essential functions listed is subject to reasonable accommodation in accordance with the American Disabilities Act.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Reports to the Process Engineering Manager: This position's primary focus is to provide process engineering support and optimization assistance for MPLX's facilities including supporting operations in troubleshooting, process modeling, and PHAs. This person will collaborate with business development, engineering, operations, and the capital projects groups to develop, evaluate, and advance projects. All work will be performed in compliance with company standards, procedures, and government requirements. This position belongs to a family of jobs with increasing responsibility, competency, and skill level. The actual position title and pay grade will be based on the selected candidate's experience and qualifications. KEY RESPONSIBILITIES: * Work closely with Operations and Business Development to troubleshoot process related bottlenecks. * Provide process support for facility startups and shutdowns. (Planned and Unplanned) * Generate monthly KPI (Key Process Indicators) reports for facilities. * Provide process support for PHAs and LOPAs of facilities. * Assist Operations in the development and review of CPVs, SOLs, and Operating Procedures. * Provide process engineering support for root cause failure analysis of equipment, instrumentation, and process controls. * Participates in the development and review of new G&P standards including engineering, operations, PSM, environmental, and health and safety. * Must be able to handle assignments and projects with minimal supervision and complete within acceptable time standards. * Travel expected up to 33% based on location. Other MPLX locations may be considered. EDUCATION AND EXPERIENCE: REQUIRED: * Bachelor's Degree in Engineering from an accredited College or University * Minimum of 3 years of Process Engineering experience * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Valid Driver's License * Must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. PREFERRED: * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Chemical Engineering degree * PE License * Broad process knowledge of compressor stations, natural gas cryogenic processing facilities, and light end fractionation processes. * 7+ years in the oil & gas, chemical, pharmaceutical, or manufacturing industry SKILLS: Must have excellent verbal and written communication skills to effectively communicate with all levels of individuals/employees. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Midland, Texas Job Requisition ID: 00020052 Pay Min/Max: $104,300.00 - $179,800.00 Salary Grade: 11 - 12 Location Address: 600 N Marienfeld St Ste 450 Box 140 Additional locations: Bridgeport, West Virginia, Cadiz, Ohio, Canonsburg, Pennsylvania, Carlsbad, New Mexico, Denver, Colorado Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Job Description Supports the manufacture of products to ensure Operations core metrics are successfully achieved. Provides technical leadership and support of manufacturing improvements and floor support for assigned product lines. Principal Accountability: Provides engineering support for troubleshooting efforts for any process issues in designated area. Summarize and draw conclusions from test results leading to effective technical resolution of process problems. Develops and maintains the documentation necessary to ensure the consistent manufacture of MITG products (processes, drawings, and shop floor paperwork). Works with Process Development engineers to ensure design for manufacturing elements are incorporated into PDP activities. Identifies, justifies, and implements significant data driven projects to reduce manufacturing costs, improve processes, increase product reliability, and enhance process capability. Designs and evaluates new and existing fixtures and equipment, test methods, specifications, layouts, and standards supporting a Lean manufacturing environment. Identify and recommend manufacturing technologies to strategically develop business objectives and potential opportunities. May have supervisory responsibility for technician staff. Comply with applicable FDA and international regulatory laws/standards and the MITG Code of Conduct. Other duties as assigned or required Additional Information Please contact: Sagar Rathore ************ ******************************

The Manufacturing Engineer is responsible for optimizing the process capability of the assigned product group by developing and verifying processes, analyzing process flows, implementing performance improvements, and conducting long-term process monitoring. This role ensures that production operations meet safety, quality, cost, and delivery objectives through process improvements, technical support, and continuous improvement initiatives. The engineer acts as the technical liaison between design, production, quality, and maintenance teams to sustain and enhance product line performance. Key Responsibilities: Safety & Compliance: Ensure compliance with safety, environmental, and regulatory standards in all process designs and implementations. Quality: Collaborate with Quality Assurance and implement best practices for process control. Daily Operations: Ensure stable and efficient production processes to support execution of production plan. Train operators and supervisors on new processes, equipment, and quality standards. Provide technical guidance during equipment installation, qualification, and maintenance troubleshooting. Process Standards: Update and maintain production standards in ERP (Standard Rates/Crewfactor) Develop, document, and maintain manufacturing process instructions, standard work, and operating procedures. Process Improvement: Collaborate with Quality and Production teams to reduce setup times, improve cycle times and reduce scrap. Analyze production data to identify trends, inefficiencies, and opportunities for cost reduction and process improvement. Design and validate tooling, fixtures, and process layouts to ensure ergonomic and efficient operations. Monitor and improve key performance indicators (KPIs) such as throughput, downtime, and quality metrics. Participate in cross-functional continuous improvement activities, including Lean, 5S, and Six Sigma initiatives. Problem Solving: Actively participate in root cause analysis and corrective and preventive actions (CAPA) for process-related issues, internal rejections, and customer complaints. Communication: Foster open, cross-functional communication across all levels and departments to address opportunities and challenges within the product line. Support new product introductions (NPI) and engineering change implementations within the product line. Key Metrics: (Product Line Performance Card) Safety and Compliance Recordable Incident Rate: OSHA-reportable safety incidents per period. Near Miss Reporting: Frequency of safety risks reported before they become incidents. Quality Customer complaints and/or returns: Frequency and type of product issues reported post-shipment. Scrap Rate: Pieces Scrapped / Pieces Produced Internal Rejections/Defect Rate: Issues found during process control checks. Production Performance On-Time Delivery (OTD) Production Efficiency: Actual output vs. planned output. GMP (Good Manufacturing Practices) Cost Control Product Line GPM Targets (Gross Profit Margin) Material Usage Variance: Difference between actual and expected material usage. Continuous Improvement Kaizen Participation: Employee involvement in improvement activities. Downtime Analysis: Root cause tracking and reduction of unscheduled downtime. 5S or Visual Management Audits: Scores from housekeeping and organization assessments. Willingness to stay current with emerging technologies is Vital. Qualifications: Education: Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field. Experience: 3-7 years of experience in a manufacturing environment; experience supporting a dedicated product line is preferred. Capable of meeting and exceeding timelines. Strong knowledge of manufacturing processes, equipment, and production systems. Experience with Lean manufacturing, Six Sigma, and root cause analysis tools (e.g., 5 Whys, Fishbone Diagram, FMEA). Proficiency with CAD software (SolidWorks, AutoCAD) ERP systems. Understanding of GD&T, process capability (Cp, Cpk), and statistical process Control (SPC). Strong analytical and problem-solving abilities. Excellent communication and collaboration skills. Ability to manage multiple projects and priorities in a fast-paced environment. Capable of working with minimal or no supervision. A can-do attitude.

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: As a Manufacturing Engineer II, you will leverage your experience and technical expertise to develop innovative solutions, optimize manufacturing processes, and lead initiatives that drive quality, cost efficiency, and productivity in our aerospace manufacturing operations. You will work collaboratively with cross-functional teams to troubleshoot challenges, drive continuous improvement, and enhance manufacturing capabilities. You will also serve as a mentor and coach to early-career engineers, fostering their professional growth and contributing to a culture of continuous learning. Location: South Windsor, CT - 100% onsite Responsibilities: Program, set up, and operate CNC turning and milling equipment. Independently develop and refine manufacturing process plans, specifying sequences, equipment, tooling, and techniques to ensure efficiency and compliance with specifications. Design, document, and optimize CNC programs to achieve high-quality, cost-effective production. Serve as a key technical liaison with customers to address and resolve issues or requests, including blueprint clarifications and engineering changes. Lead tooling design and procurement initiatives to maximize manufacturing efficiency while controlling costs. Perform root cause analysis on production issues and implement effective corrective actions. Own and drive process improvements to enhance first-pass yield and reduce downtime. Analyze and recommend new equipment and machinery to improve quality, productivity, and operational cost-effectiveness. Provide technical leadership in continuous improvement programs and actively mentor junior engineers. Maintain accurate documentation, including process instructions, standard operating procedures, and machine settings. Act as a mentor and coach to early-career engineers, fostering technical growth and professional development within the team. Maintain compliance with Pursuit Aerospace's quality systems, safety protocols, and operational standards. Required Qualifications: Bachelor's degree in Engineering At least 3 years of manufacturing engineering experience Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Mechanical, Manufacturing, or Aerospace Engineering degree is preferred. Experience working in an AS9100 environment CNC milling and turning or precision machining experience. Proficiency in CNC programming, tooling design, and advanced manufacturing processes. Proficient in PFMEA, Control Planning, and measurement system analysis (MSA) Ability to work with metrology equipment or inspection in process control Strong knowledge of Lean Manufacturing philosophy Advanced problem-solving and analytical skills with the ability to manage multiple projects. Excellent interpersonal and communication skills to effectively collaborate across teams and with customers. Proficiency in CAD software, ERP systems, and advanced Microsoft Office tools. Working Conditions Must be able to have prolonged periods sitting at a desk and working on a computer. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 15 pounds. Personal protective equipment (e.g., safety glasses ) is required on the shop floor Occasional weekend and evening work may be required to accommodate priorities, deadlines, and schedules. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

We are looking for Manufacturing Engineers! Are you a driven problem-solver with a passion for process improvement and operational excellence? We are seeking a skilled Manufacturing Engineer to join our team and play a critical role in enhancing production efficiency, maintaining high standards of quality, and supporting innovative manufacturing initiatives. If you excel in collaborative environments and are committed to making a measurable impact, we invite you to explore this opportunity with us. Summary of Job Responsibilities; Supports on-going manufacturing processes under general supervision in order to attain smooth operating and manufacturing assembly capabilities. Defines and solves all major manufacturing and assembly problems and takes corrective actions as necessary. Identifies imperfections in manufacturing processes, including design and process engineering, material, machinery and equipment, and personnel. Communicates with broad range of departments to incorporate corrective action. Establishes new procedures and techniques as appropriate. Maintains on-going accuracy of manufacturing process documentation with regard to product engineering specifications and manufacturing capabilities. Estimates cost of new process techniques and designs in support of cost reduction programs. Coordinates implementation of these plans with all departments. Prepares, implements and supervises layout, tooling, product flow and related engineering functions necessary to bring new product line from blueprint stage to production. Responsible for development of capital equipment justifications. Assist supervisor with compilation of status reports on each model within appropriate technical area. Insure capability of process design improvements generated by Manufacturing Engineering, Industrial Engineering and Design Engineering with on-going assembly procedures. Qualifications Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field, or Equivalent Job Experience. Experience and Specialized Knowledge Required: Proven experience in a manufacturing or production engineering role. Strong understanding of manufacturing processes, lean principles, and continuous improvement methodologies Proficient with CAD software and other engineering tools (e.g., SolidWorks, AutoCAD) Excellent problem-solving skills and attention to detail Strong analytical and organizational abilities Effective communication and teamwork skills Familiarity with quality control standards and safety regulations Experience with process automation and robotics is a plus Ability to manage multiple projects and meet deadlines in a fast-paced environment

Full-time Description The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Prepare supporting data and documentation for Capital Appropriation approval request forms Create and maintain shop routings for components and chain assemblies. Create product structures by assigning and calculating raw material for components. Provide tooling cost for job quotations. Provide run time standards and estimates for job quotations. Maintain new and existing tooling database. Maintain records for wastewater treatment, discharge, chemical purchasing and usage. Manage database for item master and item site planning information. Manage the database for work centers/departments. Installation and maintenance of all cost and performance standards. Perform occupied time studies for machine and labor run time standards. Perform cost analysis of product Analyze manufacturing processes and determine Return on Investment (ROI) for project justification. Participate in Design Review meetings with Product and Design Engineers. Respond to customer inquiries, escalating manufacturing and delivery issues as appropriate. Other tasks, projects and functions as assigned. Requirements Bachelor's Degree in industrial or Manufacturing Engineering preferred. 4 or more years of related work experience. Knowledge of lean manufacturing and an understanding of rates and cycle time Proficient in Microsoft Office Print interpretation including GD&T Knowledge of engineering principles Ability to travel, if needed Learn more about U.S. Tsubaki at: ************************* U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Salary Description $80,000 - $100, 000 / year

Our client, a well-established precision manufacturing organization is looking for a Manufacturing Process Engineer to support the development and optimization of production processes for both new and existing products. Key Responsibilities Develop, assess, and refine manufacturing methods to support new product introductions and ongoing production Translate customer requirements and technical documentation into efficient, repeatable manufacturing processes Investigate and resolve production challenges related to machining, tooling, and equipment performance Design and improve fixtures, tooling, and process layouts to enhance quality and throughput Create and maintain detailed process documentation, including operation sheets and engineering drawings Collaborate cross-functionally with internal teams, suppliers, and customers to support production needs Review and implement engineering changes and manufacturing documentation updates Analyze production data and technical specifications to evaluate manufacturability and process capability Apply continuous improvement principles to reduce waste, improve efficiency, and increase capacity (e.g., root cause analysis, setup reduction, standard work, error-proofing) Qualifications Bachelor's degree in Engineering or a related technical discipline (materials, metallurgy, or similar preferred) 5+ years of experience in a manufacturing engineering role within a regulated or high-precision environment (aerospace experience strongly preferred) Familiarity with quality management systems such as ISO 9001 and/or AS9100 Proficiency with CAD/CAM tools (e.g., SolidWorks, Mastercam) and ERP/MRP systems Strong analytical and problem-solving skills with the ability to collaborate effectively in a team setting Practical machining knowledge or hands-on manufacturing background

Job Purpose: Design and implement efficient manufacturing processes and systems that optimize production while maintaining quality and cost-effectiveness. Support technical problem-solving and coordinate new process implementation using Lean Manufacturing principles. Key Responsibilities: Manage manufacturing launch for new/revised products Create and update BOMs and routings in production systems Design manufacturing processes and equipment to improve capability and quality Create / update manufacturing instructions as designs are improved Develop and test tools and machinery for improved manufacturing methods Solve production workflow issues (bottlenecks, machine reliability, waste reduction) Prepare facility/equipment layouts using CAD software Provide technical guidance for manufacturing activities Collaborate with Engineering, Purchasing, and global teams Prepare feasibility studies and cost justifications Monitor production and implement efficiency improvements Requirements: Bachelor's Degree in Engineering (Manufacturing Engineering preferred) Knowledge of machine design, welding, and special processes Strong leadership skills and self-motivation Statistical Process Control (SPC) implementation ability Proficiency with 3D CAD (SolidWorks or Creo a plus) and MS Office Strong Tooling and Fixture design Preferred Qualifications: 5+ years manufacturing experience Lean Manufacturing experience or certification Oil & Gas industry experience Understanding of GD&T and dimensioning Travel Requirement: This role may require domestic and potentially international travel of up to: #LI-KP1

Are you ready to dive into the world of surface mount technology (SMT) and become a process engineering guru? Join our dynamic team as an SMT Process Engineer I and help us enhance our manufacturing processes! What You'll Do Effective Communicator: Communicate and listen professionally and courteously. Team Player: Cooperate with supervisors and co-workers, working seamlessly as part of a team. Organized & Adaptable: Stay organized, adaptable, and professional, following instructions with ease. Tech Savvy: Proficient in Microsoft Office tools (Word, Excel, PowerPoint, Outlook). SMT Equipment Pro: Gain knowledge and experience in programming printers, SPI, pick and place, reflow ovens, and AOI. Troubleshooting Expert: Learn and understand the technical functions and troubleshooting of machinery both mechanically and electrically. Profile Creator: Create and debug oven reflow profiles, understanding temperatures in Fahrenheit and Celsius. Quality Analyst: Learn defect review, root cause analysis, and writing pre and post-build DFM reports. Solder Specialist: Gain expertise in Selective and Wave soldering, programming, and technical support. X-ray Interpreter: Learn to interpret 2D and 5DX x-ray images, with programming being a plus. Label Guru: Understand label creation programming and barcodes. Stencil Designer: Work with Stencil Design using Gerbers, CAD, and other design tools. Rework Expert: Master rework processes, including hot air, BGA repair, Wash/PCA cleaning, and solder iron rework. AutoCAD/SolidWorks: Utilize AutoCAD or SolidWorks for design and interpretation of assembly and fab drawings. Customer Collaborator: Work directly with customer engineering groups to improve designs and processes. What We're Looking For Education: Associates and/or B.A., B.S. Degree in Electrical Engineering or related technical field. Experience: At least 5+ years of on-the-job experience in a similar industry. Customer Service: Demonstrated positive customer service demeanor. Communication Skills: Superior written and oral communication skills. Technical Background: Strong technical understanding of circuit card and box build assemblies. If you're passionate about process engineering and eager to make a difference in a fast-paced environment, apply today and become a key player in our SMT team! Qualifications Qualifications: Able to successfully perform mathematical and physics calculations Project planning and drafting skills are essential Project management is a plus Problem-solving skills with ability to devise technical and creative solutions to a variety of issues that may arise to prevent delays and keep projects moving Team coordination with other team member is essential. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Proficiency with working knowledge of Microboard's Shop Floor Tracking System (Aegis) software is preferred. Ability to define problems, collect data, establish facts, and draw valid conclusions. Knowledge of component identification is required. Individuals must pass the Component ID and IPC-A-610 Solder Inspection Trainings. Education and/or Experience: Bachelor's degree in engineering is required Language Skills: Ability to read and speak English fluently. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to talk or hear. The employee is frequently required to stand and walk. The employee must frequently lift and/or move up to10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. Personal Protective Equipment (P.P.E): Specific items of clothing and/or equipment may be required to perform certain functions and operations. Any of the following three serve as sufficient criteria in determining the need for P.P.E. compliance with: Microboard policy. Safety Data Sheet (SDS) stipulations. OSHA regulations generally. Microboard is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Are you looking for a new challenge? Passionate about innovation? Want to work for a global company that values integrity, teamwork, and loyalty? At LATICRETE International, we aim to be the leading construction brand trusted globally for high-performance tile and stone installation systems and building finishing solutions. We've been in business for over 65 years, family-owned for three generations, and can be found in over 100 countries. The Hartford Business Journal even named us one of Connecticut's top family-owned companies in 2017! We don't just make innovative, industry-leading products. Our purpose is to improve the built world and the lives of those who build it. We strive to connect with, engage with and improve the lives of our employees, our customers, our partners, and the global communities in which we operate. We are seeking passionate and ambitious employees who want to make a difference not just within our organization, but within their communities, our industry, and the world. If that sounds like you, then what are you waiting for? Join the family and expand your horizons! Just some of our benefits: Medical Dental Vision 401k Tuition reimbursement 13 paid holidays in addition to paid vacation and sick time Flexible spending Life Insurance, AD&D and Supplemental Insurance 1 week paid plant shutdown between the Christmas and New Year's Day holidays POSITION SUMMARY Applying engineering and chemistry techniques, assists in the improvement of quality and manufacturing processes and products and in the transition of new products and processes from R&D to production. Assist in equipment and processes design to ensure efficient, cost-effective, and to promote safety, quality and reliability. Assess current equipment methods and processes and makes recommendations for changes. Troubleshoot and repair equipment and processes. Shows results in reports. Applies themselves in laboratory setting as needed follows good GMP. May train personnel in equipment and method usage and processes. Performs work under minimal supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES Additional duties and responsibilities may be assigned, as necessary. Process Lab and New Product Development Support (50%) Assist NPD projects as assigned and in compliance with Procedures, Programs, and Policies. Execute Design of Experiments for Pilot Plant Scale-Up and Production Scale-Up. Analyze Design of Experiment data compared to expectations and opportunities for improvement. Data Analysis / Technical Management (20%) Analyze product/process data identifying opportunities for improvement and cost reduction. Analyze product/process/quality data identifying opportunities for improvement and cost reduction. Analyze the production requirements of products and ensure JDE1 data are correct. Ensure all operations and processes comply with ISO/QMS requirements. Develop work instructions and provide training on new and improved equipment and processes. Plant Support (15%): Assist in identifying, developing and implementing process improvement initiatives which reduce waste and non-value added activities. Assist with planning, developing and implementing quality and manufacturing process changes that yield improved Overall Equipment Effectiveness (OEE); production efficiencies, yields and rates. Provide support on any production/product/quality issues as required. Assist with evaluating equipment and process capabilities and make recommendations on equipment design and selection. Develop a rapport with multiple Plant Leadership Teams, QA Team, and R&D personnel. Coordinate QA efforts with R&D and vice versa. Pilot Plant (15%): Operates and ensures pilot plant machines/production equipment are prepared for operation and installed following protocols and procedures and performs regular technical testing to ensure their safety and efficiency and ensures are functioning to specifications. Executes required lab testing for experiments completed in the pilot plant. REQUIRED SKILLS & QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: Bachelor's degree in Chemical Engineering, Industrial Engineering, or Mechanical Engineering from an accredited university Specialized Skills and Experience: Minimum of 1 - 3 years' experience in a process manufacturing environment. Self-starter, able to work alone with limited supervision. Handles low complex issues and problems and refers only the most difficult and complex issues to higher-level staff. Analytical thinking and problem solving skills. Excellent communication (oral and written) and interpersonal skills. Highly organized in scheduling, executing responsibilities and prioritizing in a multitask environment. Team player - maintain a positive, cooperative attitude with all employees of LATICRETE and all customers. Leadership skills. Computer skills: Advanced knowledge of Microsoft Office (Word, Excel, PowerPoint) and Outlook. Mini-Tab or other similar software. Travel Requirement: Up to 50% (domestic and international). Must have or be able to obtain a passport. Physical Requirements: Lift: Must be able to lift and/or carry a minimum of 50 pounds. Push/Pull: Must be able to push/pull 25 pounds. Standing: Must be able to stand at least 50-75% of the day. Sitting: Must be able to sit 25-50% of the day. Twisting/Bending: Must be able to Twist/bend 50-75% of the day. Squatting, Climbing and/or Crawling: Must be able to squat/climb/crawl 20% of the day.

Title: Research Metallurgist The Research Metallurgist provides technical expertise in areas of materials and processes in support of all areas of the company. Initiates and conducts new material, process, and product development; works directly with customers and potential customers to resolve technical problems; and assumes leadership of R&D during the absence of the R&D Manager. Supervisory Responsibilities: Yes Duties/Responsibilities: Initiate and conduct new product development, especially in the areas of new alloy formulation, materials processing and innovative use of all Deringer-Ney processes and materials. Assist with day-to-day manufacturing problems related to materials and processing. Take lead role in the development of innovative solutions to manufacturing problems. Provide technical support to the Sales and Marketing departments. Work directly with customers and prospects to select appropriate DNI products. Perform detailed failure analyses for company, customers, and prospects. Prepare well written, professional reports for both internal and external use. Provide technical training, and support of, field sales personnel. Maintain working knowledge of technological developments in both new and existing markets and keep upper management aware of potential impact of these changes. Support new product development activities of others within the company. Initiate continuous improvement and operational excellence programs within R&D and support similar programs within the organization. ADDITIONAL RESPONSIBILITIES: Supervise activities of R&D technician(s). Undertake special projects as requested by the R&D Manager. Develop and document new test methods to support improved product quality/ reliability. Required Skills/Abilities: Technical understanding of company products and processes. Well-developed interpersonal skills. Excellent writing ability. Able to prepare and make effective presentations to company employees and customers. Experience & Education Requirements: Minimum - BS degree in Metallurgical Engineering, Materials Engineering, or Materials Science and Engineering. Demonstrated understanding of Processing-Structure-Property-Performance relationships. Demonstrated record of preparing high quality technical reports, whitepapers, manuscripts, or patents. Required Experience: BS + 5 years industrial research experience. MS year industrial research experience. Physical Requirements: Prolonged periods of sitting at a desk and working on a computer. Must be able to lift 15 pounds at times. Must be able to access and navigate each department at the organization's facilities.

**_What Industrial Engineering contributes to Cardinal Health_** Engineering is responsible for performing research and analyses to develop design options for components, products, systems and processes. Industrial Engineering is responsible for enhancing / developing processes, layout and associated tools. Identifies, analyzes and implements new or existing technology to optimize business processes. Designs process improvements to reduce cost, cycle time, improve quality and/or increase throughput. Directs external resources / contractors as required. The Capital Investments Manager will lead a team supporting Pharmaceutical Supply Chain Operations in the areas of capital project planning and management, capacity planning, operational process change, and overall distribution center operating layout optimization. This leadership role will oversee the deployment of new process and automation solutions, facilitate new building designs and layout changes, and ensure alignment with strategic objectives. In addition to technical expertise, this role will be responsible for managing and developing team members, fostering a culture of collaboration, innovation, and continuous improvement. The role includes partnering with Operations leaders, guiding the deployment of capital project investments across Pharmaceutical Supply Chain Operations, submitting capital requests for a network of over 25 sites, and overseeing project implementation and adoption to realize measurable improvements. **_Responsibilities_** + Hire, train, supervisor, develop a team of engineers. Provides ongoing coaching, performance management, talent development and team effectiveness. + Create a strategy and appropriate business cases relative to leveraging warehouse automation to drive out waste and improve overall warehouse distribution activities. + Drive process engineering initiatives including conceptual operational designs, layout-change scenarios, and innovative automation solutions. Work closely with business operations partners to iterate on solutioning to optimize results. Bring modernization concepts to Operations through material handling and engineering external partnerships. + Works closely with Pharma Supply Chain Operations Vice Presidents, and site leaders to manage capital projects planned within the buildings. Develops capital budget priorities, establishes preliminary budgets,business case justifications, and formalizes all capital requests for budgeted, approved, or newly scoped projects. + Leads multifunctional teams of stakeholders and contributors to deliver large complex projects on time and under budget.Coordinates with other functional groups including Corporate Real Estate,field operations, Security, Information Technology, Inventory, Quality & Regulatory, Sales,and EH&S to ensure efforts are aligned, and coordinated as projects are developed and analyzed. + Integrated team members supporting operations leadership teams to ensure that capital projects and infrastructure are deployed, coordinated, managed, and maintained to drive building performance expectations. This role also manages and executes small construction projects independent of Corporate Real Estate / Construction including all cage and vault construction resulting from expansion or relocation needs. **_Qualifications_** + Bachelor's Degree in related field or relevant work experience, preferred + 8-12 years of experience in Operations, project and budgetary management, capital investment analysis and deployment, leading complex projects with multi-functional teams, preferred + Experience with automation solutions, facility design, material handling systems, integrated warehouse controls and execution applications, preferred + Experience with AutoCAD and other software applications to drive warehouse design and concepting, preferred + Strong Leadership skills, Strong scheduling and organizational skills + Excellent technical problem-solving capability + High level of initiative - Team player + Willing and transparent communicator + Proficient with Microsoft Office Suite + Excellent written and verbal communication skills + Moderate travel to other facilities for projects and supervision of equipment installation (25%, up to 50% during specific deployment activities and project implementations) **_What is expected of you and others at this level_** + Manages department operations and supervises professional employees, front line supervisors and/or business support staff + Participates in the development of policies and procedures to achieve specific goals + Ensures employees operate within guidelines + Decisions have a short-term impact on work processes, outcomes and customers + Interacts with subordinates, peers, customers, and suppliers at various management levels; may interact with senior management + Interactions normally involve resolution of issues related to operations and/or projects + Gains consensus from various parties involved **Anticipated salary range:** $105,100 - $150,100 **Bonus eligible:** Yes **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 3/13/2026 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country, or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. Are you ready to go beyond? **Responsibilities:** + Subject matter expert on manufacturing processes including: equipment, floor layouts, work sequence, work instructions, procedures, and work flow + Develop and improve standard work + Identify process improvements opportunities using analysis, modeling, benchmarking, research, etc. + Design layouts of equipment and workspace and improving process flow + Conduct studies on cost control, productivity, cost reduction, inventory, and production record systems + Provide measurable input into the sequence of operations and work instructions + Contribute to plans for allocation of resources, materials, and personnel to establish maximum utilization + Study product requirements and determine capital equipment and labor staffing to meet requirements. + Ability to work effectively with other engineers, technicians, operators, and management + Conduct machine capacity analysis and identify/manage improvement initiatives to increase efficiency (OEE). + Understanding of capital acquisition process - knowledge or background preferred + Working knowledge of product manufacturing / process technologies + Participating in and leading Kaizen events **Qualifications You Must Have:** + Bachelor's Degree in Industrial Engineering, Manufacturing or Operations. + Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 3-5 years of prior relevant experience + Data mining & manipulation experience with Excel, VBA, SQL, other methods. + US Citizenship is required due to government contracts. **Learn More & Apply Now:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 101,000 USD - 203,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.