Industrial engineer jobs in Lakewood, CA

CMP Services seeks a Engineer IV (Electrical) - Sustainability to support LACCD at Los Angeles Community Collage District program. This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects as defined under the BuildLACCD Bond Program. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with LACCD's Capital Construction Bond Program requirements and legal limitations governing bond fund expenditures. Duties: Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations. Implement the electrification of central plants and other building systems outlined in the Board of trustees' Clean Energy Resolution passed in July 9, 2020. Apply knowledge of Sustainable Building Principles and Standards to assist with complex systemslevel issues. Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives. Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency. Understand Title 24 and ASHRAE recommendations. Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines. Assist College Project Teams (CPT's) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC's), Change Orders, etc. Travelling to and from project sites upon request of attending project and construction meetings. Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout. Perform electrical engineering analysis and technical reports supporting District design guidelines. Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls. Perform other related duties as assigned by the PMO and LACCD. Required Experience: Bachelor's Degree in in Electrical Engineering 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects. Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC),California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards. Preferred Qualifications: 2 years' experience in Educational Facility Construction Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS) California Professional Engineering (PE) license in Electrical Engineering

The Industrial Engineer III, Continuous Improvement is responsible for analyzing, designing, and optimizing manufacturing processes and systems to improve efficiency, productivity, and quality. This role involves a blend of technical expertise, problem-solving skills, and project management capabilities to drive continuous improvement initiatives across the organization. This role involves collaborating with internal and external teams to develop and implement new manufacturing processes and technologies. Position Responsibilities * Analyze existing production processes to identify inefficiencies, bottlenecks, and potential areas for improvement. * Experience with ramping up production volumes from low initial rates to higher volume full rate productions with demonstrated success. * Develop and implement process improvements using Lean Manufacturing methodologies. * Implement and manage lean application development at site level, including but not limited to training on lean tools, assessments, and site development action plans. * Generate value stream maps, identify opportunities for improvement, manage improvement plan. * Develop capacity models for new and current production processes. Analyze and maintain models after improvements. Experience with Digital Twin Simulation software for modeling, scenario management, and optimization of factory processes. * Develop and execute the strategy for visual management and real-time data display across the manufacturing facility, aligning with overall business objectives and strategies. Standardize the visual reporting practices and ensure consistency across all production lines and shifts. * Analyze KPI trends and provide actionable insights to management and floor supervisors to drive continuous improvement initiatives. Foster a culture of accountability by empowering teams to use data to make decisions and take action. * Analyze existing production processes to identify inefficiencies, bottlenecks, and potential areas for improvement. * Experience with ramping up production volumes from low initial rates to higher volume full rate productions with demonstrated success. * Develop and implement process improvements using Lean Manufacturing methodologies. * Implement and manage lean application development at site level, including but not limited to training on lean tools, assessments, and site development action plans. * Generate value stream maps, identify opportunities for improvement, manage improvement plan. * Develop capacity models for new and current production processes. Analyze and maintain models after improvements. Experience with Digital Twin Simulation software for modeling, scenario management, and optimization of factory processes. * Develop and execute the strategy for visual management and real-time data display across the manufacturing facility, aligning with overall business objectives and strategies. Standardize the visual reporting practices and ensure consistency across all production lines and shifts. * Analyze KPI trends and provide actionable insights to management and floor supervisors to drive continuous improvement initiatives. Foster a culture of accountability by empowering teams to use data to make decisions and take action. * Other duties as assigned Basic Qualifications (Required Skills & Experience) * Bachelor's degree required in Industrial Engineering, Manufacturing Engineering, or a related field or equivalent combination of education, training, and experience. * Advanced degree, MBA or MS is preferred. * 5-8 years of relevant experience in a manufacturing environment. * Advanced understanding in Lean Manufacturing methodologies. * Ability to work at a minimum of 80% of the time on the production floor. * Experience with simulation software (e.g., SIMIO) and CAD tools (e.g., AutoCAD, SolidWorks). * Displays strong initiative, drive to accomplish goals, and meet company objectives. * Takes ownership and responsibility for current and past deliverables. * Ability to prototype and iterate on visual designs. * Experience with 3D printing software, equipment, and materials. * Strong data analysis skills, with proficiency in using tools such as Minitab, Excel, and SQL Other Qualifications & Desired Competencies * Strong written and verbal communication skills. * Strong analytical, time management and organizational skills. * Strong computer skills and proficiency with office software and productivity tools. * Strong knowledge of Microsoft Office Suite (Word, PowerPoint, Excel). * Works well with little or no supervision and exercises independent judgement on a regular basis. * Ability to gain cooperation of others, conducting presentations of technical information concerning specific projects or schedules. Physical Demands * Ability to sit, stand, stoop, reach, lift up to 35 lbs., bend, etc. Hand and wrist dexterity to utilize the computer. * May require travel to sites/program and special functions. Environmental Conditions Critical to Performance * Work is in an office and manufacturing environment, climate controlled through central air conditioning/heating. * May have some exposure to outside environment while traveling. Special Requirements * U.S. Citizen, U.S. Permanent Resident (Green Card holder) or asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) required. * Must be able to travel within the Continental U.S. and internationally when required. Clearance Level No Clearance The salary range for this role is: $108,275 - $153,615 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

If you live in City of Industry, CA the salary range for this position is $85,500 - $94,500. If you are live in Phoenix, AZ the salary range for this position is $78,660 - $86,710 however, base pay offered may vary depending on location, job-related knowledge, skills, and experience. This role is an onsite position based out of our Final Mile Center in City of Industry, CA or Phoenix, AZ. The Operations Industrial Engineer plays a vital role in staffing, planning, and achieving site(s) specific goals across Wayfair. They partner with others to ensure timely and cost efficient processing of the orders. What You'll Do * You will create weekly and daily operating plans for site(s) and resolve variances between plan, actuals, and goals. Responsible for site plans at this cadence to align with Site leadership and network priorities. * You will monitor plans and work in process backlogs to consider impacts of future planning and staffing * You will provide input to strategic shift planning at the site to ensure the building is staffed according to short-mid-long term volume projections * Coordinate with local site operations and central planning teams to analyze historical data and forecast demand for that site * Manage and interpret the analyses of daily, weekly, and monthly reporting of site performance via Key Performance Indicators (Service Level Commitments) * You will be able to engage at shift level, in real time to make proactive changes to support execution of the daily operations plan * You'll be responsible for facilitating problem solving efforts when goals are not met based on current inputs to daily plan - i.e. Attrition, Absenteeism, Productivity * You will support site operations team by optimizing staffing requirements for the site specific daily plan * You will build a strong relationship with the site operations team to ensure proper execution of the daily level capacity / throughput plan through education in visibility to data and constant communication * Communicate with cross-functional leadership * Work in close collaboration with Network Planning, Field Industrial Engineering, Process Definition and Standards Excellence to enable performance management improvements What You'll Need * 2+ years relevant experience in supply chain * Excellent communication skills - Able to guide and influence peers and leaders across levels and organization. Disseminate information effectively. * Technical aptitude in multiple systems; understanding of Google Suite, Data Visualization platforms, basic SQL/GBQ. * Preferred Bachelor's Degree in a quantitative field (engineering, economics, math, and statistics), business or equivalent * Basic and working knowledge of Six Sigma tools and Lean techniques; process focused, organized and able to assess change management requirements * Strong understanding in the use of technical/statistical tools to drive process improvements * You must be authorized to work in the United States without visa sponsorship by Wayfair now or in the future. Assistance for Individuals with Disabilities Wayfair is fully committed to providing equal opportunities for all individuals, including individuals with disabilities. As part of this commitment, Wayfair will make reasonable accommodations to the known physical or mental limitations of qualified individuals with disabilities, unless doing so would impose an undue hardship on business operations. If you require a reasonable accommodation to participate in the job application or interview process, please let us know by completing our Accomodations for Applicants form. Need Technical Assistance? For more information about applying for a career at wayfair, visit our FAQ page here. About Wayfair Inc. Wayfair is one of the world's largest online destinations for the home. Whether you work in our global headquarters in Boston, or in our warehouses or offices throughout the world, we're reinventing the way people shop for their homes. Through our commitment to industry-leading technology and creative problem-solving, we are confident that Wayfair will be home to the most rewarding work of your career. If you're looking for rapid growth, constant learning, and dynamic challenges, then you'll find that amazing career opportunities are knocking. No matter who you are, Wayfair is a place you can call home. We're a community of innovators, risk-takers, and trailblazers who celebrate our differences, and know that our unique perspectives make us stronger, smarter, and well-positioned for success. We value and rely on the collective voices of our employees, customers, community, and suppliers to help guide us as we build a better Wayfair - and world - for all. Every voice, every perspective matters. That's why we're proud to be an equal opportunity employer. We do not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, genetic information, or any other legally protected characteristic. Your personal data is processed in accordance with our Candidate Privacy Notice (***************************************** If you have any questions or wish to exercise your rights under applicable privacy and data protection laws, please contact us at *********************************.

Would you love helping influence senior leaders with data-driven analytics in the morning, and work on a system-optimization project in one of the Disney Parks & Resorts in the afternoon? As an Associate Industrial Engineer at Disney, you would help translate ideas into tangible innovation opportunities that focus on operations improvement. Working on a diverse set of projects, you would flex your analytical, process and system optimization skills in service of a key goal: to make a happier, more seamless experience for our Guests, at every stage of their visit. Join our IE team! Responsibilities: You'd join a diverse, networked team that collaborates on initiatives to drive Disney's Parks & Resorts business to the next level. We use creativity and in-depth analytics to develop strategies and implement solutions that can directly impact the happiness of our Guests. Every single day as an Associate Industrial Engineer is different! On any one day you might: Strategize with multiple departments to find the next productivity boost Develop analytics to identify areas for improvement and change; Engage in a brainstorming session about simulation, forecasting, and optimization Formulate plans with other engineers for future operational development Present to operational leadership to help influence change; Develop relationships within Disney through cross-team collaborations Gain leadership development and rotate between client groups; Attend seminars on professional and personal development; Research and benchmark topics relevant to your project scope; Lead or support others with a field study Spend time in the Parks to observe operations, and gain process insights Grab lunch with the team or hop on an attraction at a Disney park! Basic Qualifications: Please apply if you have: A Bachelor's Degree in Industrial Engineering, Operations Research or equivalent 0-2+ years of applied experience Project management skills, with an emphasis on communication and building strategic relationships A knack for consulting and making quality/process improvements A confident presentation style with the ability to lead key stakeholders Exposure to capacity/demand analysis and modeling techniques Knowledge of conducting field studies/data collection efforts Confidence with spreadsheets, databases, and statistical/graphic software Resiliency - you're up for the challenge of continuous improvement and work through hurdles Creativity to approach problems in new, innovative ways The ability to successfully juggle multiple tasks at once, especially in dynamic environments A flexible schedule - you're able to meet project milestones The ability to think outside the box, providing ideas on how to do things differently Required Education : A Bachelor's Degree in Industrial Engineering, Operations Research or equivalent Preferred Education : A Master's degree in Industrial Engineering, Operations Research, Business or equivalent Additional Information : Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities and special extras that only Disney can provide. Learn more about our benefits and perks at **************************************** Disney Engineering: Role Spotlight | Industrial Engineering - YouTube The hiring range for this position in Anaheim, CA is $87,100 to $116,800 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. Job Posting Segment: Park Ops Job Posting Primary Business: Operations Planning & Insights (DLR) Primary Job Posting Category: Industrial Engineering Employment Type: Full time Primary City, State, Region, Postal Code: Anaheim, CA, USA Alternate City, State, Region, Postal Code: Date Posted: 2025-12-22

Millennium Space Systems, A Boeing Company delivers affordable, high-performance space systems for exacting customers. At Millennium, you will be part of a close-knit team working on exciting technological problems. We work in an open environment where ideas are shared across all disciplines, and there are ample opportunities for advancement based on excellence. Superstars are welcome. At Millennium, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company committed to fostering an environment for every teammate that's welcoming, respectful and innovative, with great opportunities for professional growth. Find your future with us. Job Summary As an Industrial Engineer, you will play a critical role in designing and optimizing production processes for large scale satellites production systems. This position requires a deep understanding of manufacturing principles, Lean methodologies, and advanced industrial engineering techniques to enhance productivity, quality, and efficiency. This position's internal job code is Industrial Engineer. Our team is currently hiring for a level 4. Responsibilities Lead the team in improving productivity, reducing lead time, and maximizing space utilization through effective implementation of Lean principles. Ensure successful execution of Lean projects Develop process flow models to analyze production system behavior and synchronize output with other elements of the company Leverage advanced industrial engineering knowledge and a strong understanding of Lean principles to drive continuous improvement initiatives Utilize Continuous Improvement tools to identify opportunities and lead projects aimed at optimizing operational costs and maximizing the use of manpower, equipment, space, and investments Work independently with manufacturing, quality, and R&D engineers to identify and implement equipment and process improvements, as well as enhancements in workspaces Implement corporate level processes that are aligned with organizational vision and goals Minimum Qualifications Bachelor's or Master's degree in Industrial Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field 7+ years in industrial engineering, manufacturing optimization, or process improvement within the automotive industry Strong expertise in lean manufacturing, Six Sigma, Kaizen, and other continuous improvement methodologies Experience with budgeting, cost analysis, and ROI calculations for capital improvement projects Familiarity with ERP and MES systems (SAP, Oracle, etc.) for manufacturing data analysis This position requires an active U.S. Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Preferred Qualifications Six Sigma Black Belt certification Lean Manufacturing Certification Certified Industrial Engineer (CIE) or Project Management Professional (PMP) Excellent leadership, problem-solving, and decision-making skills Strong communication skills with the ability to influence and collaborate across all levels of the organization Summary Pay-Range Please note that the salary information shown below is a general guideline only of what is reasonably expected to be paid for the position. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Level 4: $109,650 - $161,250 Before applying, please note: Millennium is DDTC-registered, ITAR-compliant Company. This position is located at a facility that requires special access. Applicants MUST be U.S. citizens and eligible for a security clearance. Additionally, applicants must be willing to apply for and maintain a security clearance. We encourage all interested candidates to apply for any open position for which they feel they are qualified. Applicant Privacy Policy Mandatory Security Clearance and Access Process Disqualifying Criteria

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. We are building artificial gravity space stations, allowing long-term stays in space without the adverse effects of zero-gravity. Our initial crewed space habitat will be Haven-1, scheduled to be the world's first commercial space station when it launches into low-Earth orbit in 2026. It is part of our stepping stone approach to continuous human presence in LEO. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Vast is seeking an Industrial Engineer to lead a foundational role in driving operational excellence across our manufacturing facilities. Reporting to the Director of Operational Excellence, this position will focus on defining key performance metrics, optimizing production processes, and providing leadership with actionable data to improve throughput , efficiency, and accountability. The ideal candidate thrives in a fast-paced, hands-on environment, collaborates effectively across functions, and balances tactical execution with strategic process improvement. This is a full-time, exempt position based in Long Beach, California. Responsibilities: Define key performance metrics for each work center and design data systems to track and measure them effectively. Identify process bottlenecks and lead continuous improvement initiatives in partnership with manufacturing leaders and engineers. Conduct time and motion studies to establish process baselines and uncover efficiency opportunities. Maintain and update production floor plans, serving as the primary authority on floor space allocation and work center layouts. Provide actionable data and insights to hold teams and leaders accountable for delivery performance and operational goals. Act as a project management resource for manufacturing initiatives such as process qualifications, AS9100 certification, and general work center readiness. Facilitate regular (e.g., bi-weekly) production efficiency and schedule/rate review meetings with supply chain, quality, and manufacturing leadership to assess performance and drive corrective action. Support ad-hoc projects and operational challenges, providing flexible, hands-on problem-solving for the manufacturing organization. Minimum Qualifications: Bachelor's degree in Industrial Engineering, Manufacturing Engineering, or a related field. 3+ years of experience in a manufacturing or operations-focused industrial engineering role. Strong analytical skills with demonstrated experience in data collection, analysis, and reporting. Proven ability to lead process improvement initiatives, including bottleneck analysis and workflow optimization. Excellent project management skills with the ability to manage multiple priorities simultaneously. Strong interpersonal and communication skills with a track record of effective cross-functional collaboration. Knowledge of Lean Manufacturing and Six Sigma principles, with experience leading implementation. Experience using business analytics tools (e.g., Tableau, Power BI, SQL) and integrating data from multiple sources to support decision-making. Preferred Skills & Experience: Lean or Six Sigma certification (Green Belt or higher preferred). Familiarity with AS9100 or other quality management systems. Experience maintaining and optimizing manufacturing floor plans and layouts. Proven ability to facilitate cross-functional meetings to drive operational performance and accountability. Prior experience supporting certifications, process qualifications, or other manufacturing readiness initiatives. Advanced proficiency in business analytics and data visualization, including integration of manufacturing and supply chain data systems. Experience utilizing time and motion analysis techniques, such as MOST. Pay Range: Senior Industrial Engineer: $115,000 - $165,000 Staff Industrial Engineer: $138,000 - $194,000 Pay Range: California$115,000-$194,000 USDCOMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: 100% medical, dental, and vision coverage for employees and dependents, flexible paid time off for exempt staff and up to 10 days of vacation for non-exempt staff, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, One Medical membership, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks. We also take pride in offering exceptional food perks, with snacks, drip coffee, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast's ongoing commitment to providing high-quality meals for employees. U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

FRAUD ALERT: Please note that DSV will never request a chat interview or solicit funds from applicants or employees through its interviewing and hiring process. We do not require any form of payment and will not ask for personal financial information, such as credit card or bank account number. Our recruiters have an @dsv.com or @us.dsv.com email address. If you question the legitimacy of any DSV job posting, please reach out to *************. DSV - Global transport and logistics In 1976, ten independent hauliers joined forces and founded DSV in Denmark. Since then, DSV has evolved to become the world's 3rd largest supplier of global solutions within transport and logistics. Today, we add value to our customers' entire supply chain by transporting, storing, packaging, re-packaging, processing and clearing all types of goods. We work every day from our many offices in more than 80 countries to ensure a steady supply of goods to production lines, outlets, stores and consumers all over the world. Our reach is global yet our presence is local and close to our customers. Read more at *********** Location: USA - Fontana, Slover Ave Division: Solutions Job Posting Title: Industrial Engineering Manager - 103180 Time Type: Full Time SUMMARY The Manager of Engineering is responsible for delivering safe, effective, and cost-efficient solutions built on best practices, tailored to customers objectives, while driving innovation to streamline operations, solve challenges, and consistently fulfill our commitments. To the above, includes implementation of current business projects required to expand business or correct current issues with poorly performing operations. The Manager is responsible for tracking and maintaining their individual engineering metrics that will meet or exceed performance goals. In addition, this position is also responsible to aid in developing, coaching and mentoring the other engineering team members to build engineering competency and grow talent. This person will also have responsibility to support operations in order to meet budgeted operating profits and cost reduction objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES Research/Analysis: * Keep informed of best-in-class tools and techniques needed for solution design * Track all projects and provide communication and guidance to engineering leadership * Determine and enlist resources required to support targeted changes in support of CI project including WMS Engineering, Operations, Human Resources, Quality, Etc. * Analyze workflow including inbound, put away, replenishment, picking, packing, shipping and VAS processes to ensure accuracy and ability to execute * Ensures all distribution system functionality is configured to optimize performance (e.g., WMS, LMS) * Performs special research or technical studies critical to logistic support functions * Performs cost/benefit tradeoff analysis and develop ROI business cases for recommended projects involving process, system, or technology change * Develops logistics engineering strategies with the engineering leadership team * May participation in "DSV Quality Planning" (DQP) sessions with new clients validating requirements and processes Documentation/Reporting: * Document and communicate common processes for all distribution functions within scope of responsibility * Review data and summarize expectations to address gaps in operation * Identify areas for improvement based on analysis of data and observations Communication: * Communicate opportunities for improvement * Help determine key metrics and provide recommendations to guide management * Assist with developing/presenting training materials and classes for distribution processes Relationships: * Bring cross-functional teams together to collaborate on projects * Support the labor management program, including methods and procedures, engineered labor standards, * Ensure alignment among all operations' policies, procedures and ongoing improvement projects LEAN Operations: * Educate team in LEAN expanding knowledge base to support and develop a sustainable CI culture * Facilitate use of LEAN methodology in collaboration with our global team and recommend solutions * Deploy statistical tools such as Pareto Charts, Histograms and Cause & Effect Diagrams * Leverage Value Stream Map or Flow Diagram of process to identify critical to quality points * Use of Failure Mode and Effects Analysis (FMEA) of the process being evaluated to quantify impact * Maintain SME in proven industry methods and tools such as Six Sigma DMAIC, value-stream mapping, and 5S * Work with leadership to drive continual improvement programs, Kaizen events, and workshops * Set the standard for innovation within strategic and operational problem solving * Apply traditional concepts to a variety of material handling environments * Ensure that all projects include a sustainability component and drive adherence within the organization * Illustrate continual improvement successes in a case study before & after format that quantifies value Project Management: * Assist with developing and rolling out strategies and projects * Determine feasibility of projects factoring costs, available space, schedule limitations, company goals, technical requirements and economic factors * Develop and implement project activities plans and timelines, coordinate subcontractors, facility management and field service personnel, and resolve problems in area of logistics to ensure meeting of contractual commitments OTHER DUTIES * Drive standard approach for US based operations and could be asked to coordinate with Canadian counterparts * Performs other duties as required * May need to backup Engineering Leadership on occasion * Maintain fiscal responsibility towards department budget * Compliance to the Internal Labor Regulations and to the Human Resources Procedures. * Compliance to Security, Safety and Hygiene Measures & Procedures. SUPERVISORY RESPONSIBILITIES * None MINIMUM REQUIRED QUALIFICATIONS Education and/or Experience * Bachelor Degree in Industrial Engineering required or equivalent combination of education and work experience. * Minimum 2-4 years' experience in a supply chain (warehouse/4walls) environment. * Prior leadership positions directing Logistics Engineers in 3PL/supply chain environment SKILLS, KNOWLEDGE AND ABILITIES * Advanced knowledge of statistics * Proficiency in MS Office Applications with advanced knowledge of Excel, Access and Power BI * Insight into a Warehouse Management Systems allowing for understanding of system capabilities * AutoCAD * Lean methodologies * Six Sigma tools * Knowledge of various storage methodologies as well as material handling equipment * Storage and process design PREFERRED QUALIFICATIONS / DESIRED SKILLS * 7 years' experience in a supply chain (warehouse/4walls) environment. * Green Belt Six Sigma / Lean Certified * Experience dealing with end users, vendors, and clients * Experience in 3PL environment * E-commerce experience including starting up small to large volume solutions · Experience in multiple warehouse automation applications (Pick to Light, Automated Sortation, Voice Pick, conveyor design, etc.) · Experience in LMS implementation and/or steady state execution · Strong organizational skills and the ability to handle multiple responsibilities simultaneously General Qualities · Communication - written/verbal · Responsible · Proactive · Customer Service driven attitude · Work team oriented · Logistics knowledge · Analytical skills For this position, the expected base pay range is $140,000 - $160,000 annually. Actual compensation will be determined based on job-related factors, including relevant experience, skills, education or certifications, and geographic location, consistent with applicable laws and company policy. DSV offers a comprehensive benefits program designed to support the health and well-being of employees and their families. Benefits include medical, prescription, dental, vision, and life insurance, as well as flexible spending accounts (FSAs), health savings accounts (HSAs) (for eligible plans), and short- and long-term disability coverage. Employees also have access to wellness resources, Employee Assistance Program (EAP) services, and other support benefits. Financial benefits include participation in the DSV 401(k) plan, which provides company matching contributions of up to 5%. To support work-life balance, DSV offers various paid time off programs and paid company holidays. Specific PTO and leave programs may vary by location and division in accordance with state or local laws Working Conditions * Based on the nature of DSV Business, position may perform the assigned activities inside any DSV sites and change shifts as needed. · Willing to travel to support project delivery and mentoring activities. Historically 25-40% of the time. WORK ENVIRONMENT While performing the duties of this job, the employee rarely is exposed to fumes or airborne particles, toxic or caustic chemicals. The noise level in the work environment is usually low to moderate. The physical demands and work environment characteristics described above are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DSV is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, disability, veteran status, marital status, gender identity, sexual orientation, national origin, or any other characteristic protected by applicable federal, state or local law. If you require special assistance or accommodation while seeking employment with DSV, please contact Human Resources at *************. If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. DSV reserves the right to defer or close a vacancy at any time. DSV - Global transport and logistics Working at DSV means playing in a different league. As a global leader in transport and logistics, we have been on an extraordinary journey of growth. Let's grow together as we continue to innovate, digitalise and build on our achievements. With close to 160,000 colleagues in over 90 countries, we work every day to offer solid services and meet our customers' needs and help them achieve their goals. We know that the best way to achieve this is by bringing in new talent, fresh perspectives and ambitious individuals like you. At DSV, performance is in our DNA. We don't just work - we aim to shape the future of logistics. This ambition fuels a dynamic environment built on collaboration with world-class team players, accountability and action. We value inclusivity, embrace different cultures and respect the dignity and rights of every individual. If you want to make an impact, be trusted by customers and grow your career in a forward-thinking company - this is the place to be. Start here. Go anywhere Visit dsv.com and follow us on LinkedIn and Facebook. open/close Print Share on Twitter Share on LinkedIn Send by email

Job Description Since 2018, Elevate Aircraft Seating has been enhancing the passenger experience through innovative aircraft seat design and manufacturing. With locations in California, Washington, and Germany we are guided by creativity, collaboration, and a shared commitment to quality. We are looking for a skilled Industrial Engineer to join our team in Huntington Beach, CA. This is an on-site position based in Huntington Beach, CA. We value teamwork, inclusivity, and continuous professional development, and we offer competitive benefits along with opportunities for growth. JOB SUMMARY The Industrial Engineer is responsible for developing and implementing lean concepts and continuous improvement initiatives. This role will design one piece flow production lines with an established TAKT time. The Industrial Engineer will apply Lean manufacturing methods to drive continuous improvement and operational excellence. SUMMARY OF JOB DUTIES - Essential Functions (Other duties and projects may be assigned or requested.) Reasonable accommodations may enable individuals with disabilities to perform essential functions. Design and implement production lines running to TAKT times based on customer demand Perform time studies through direct observation and use data to balance one piece flow production lines, sub-assembly lines, and to find and remove inefficiencies Help implement the planning and layout of the production lines and support areas within facility, creates layout drawings in Autocad Plan, lead, and execute the implementation of CI Continuous Improvements across the facility with focus on production and materials teams Work with operators to create tool/parts holders to improve shopfloor 5s and reduce damage to parts, improve ergonomics, and efficiency Create and maintain Key Performance Indicators for production line Mentor team and teaches Lean Concepts Determine, monitor and improve upon TAKT / cycle times and implements processes, make sure production lines can meet TAKT times and rebalance, if necessary, find root cause of variability on production lines Lead special projects as needed Create Lean and robust processes, including process management, process maturity, visual management, standard work, TAKT timers, and Andon systems Identify process improvement opportunities to ensure efficiency of operations and cost effectiveness. Coordinate sequencing of work, such as build and delivery, to ensure smooth operations and optimal use of resources Design, build, and improve Material Conveyance systems Maintain a safe, secure, and legal work environment, adhering to all Company policies and procedures Contribute to team effort by accomplishing related results as needed Maintain and protect the confidentiality of the Company's information and products Perform other duties and projects as assigned or requested GENERAL QUALIFICATIONS - Education, Knowledge, and Experience Education: Bachelor's Degree in Engineering; Manufacturing or Industrial Engineering degree is required Experience: 5+ years of Lean Manufacturing practices 5+ years of Experience in implementing process improvements. 5+ years of experience in leading cross-functional teams and leaders Skills: Ability to successfully handle multiple tasks simultaneously. Experience in understanding a variety of aerospace manufacturing processes. Knowledge of related software including CATIA, AUTOCAD, and PLM Preferred Skills/Experience: Kaizen Events Lean Manufacturing Continuous Improvement Single Piece Flow Industrial or manufacturing experience Line Balancing Running lines to TAKT timers Other: May be asked to work extended or irregular hours as required Must show proof of ability to work in the United States Elevate Aircraft Seating is an “at-will” employer; employment is at the mutual consent of both the employee and the employer, and may be terminated at will for any reason, with or without cause, at any time during employment with the Company As business conditions warrant a change in the operating necessities of the Company, all employees are expected to react productively, handle other essential tasks assigned now or in the future SUPERVISION PROVIDED TO THE POSITION Direction is provided for assignments in terms of desired outcome (goals). Work is reviewed or measured in terms of meeting organizational objectives and schedules LEADERSHIP RESPONSIBILITY May guide the work of project teams. Assist in the training and coaching of other team members PROBLEM SOLVING Develop and provide solutions to complex problems that require innovation based on established precedents and are consistent with organization objectives LANGUAGE SKILLS Ability to communicate clearly and effectively in English, both verbally and in writing COMPENSATION & BENEFITS Elevate Aircraft Seating offers competitive wages and benefits to recognize employees for their work. The base pay offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Salary Range Transparency: $90,000 - $125,000 annually Featured Benefits: Up to 7% bonus potential (for bonus eligible positions) Generous 401(K) matching with immediate eligibility and vesting 3 weeks of Paid Time Off 12 paid holidays Affordable health care plans for yourself and your family And so much more! Other Perks: On-site gym Free electric car charging stations Potential for growth within organization Supportive workplace environment with a team-oriented culture

About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Industrial Engineer/Drafter We are seeking a multidisciplinary Industrial Engineer / Drafter to lead the design, analysis, and optimization of our workspaces, factory layouts, and site enhancements. This hybrid role combines technical drafting and design with industrial engineering principles to improve operational efficiency, ergonomics, and workflow. The ideal candidate will collaborate with cross-functional teams -- including Production, Facilities, and Engineering to create data-driven, scalable, and safe site and workspace solutions. Responsibilities Design & Drafting: Develop and maintain detailed CAD drawings, 2D/3D models, and documentation for factory layouts, workstations, and site plans. Translate operational requirements into efficient and compliant site designs that support productivity, safety, and ergonomics. Design new and modified layouts to support equipment integration, process flow improvements, and facility expansions. Conduct site visits to gather measurements, assess feasibility, and verify implementation accuracy. Ensure all designs adhere to building codes, safety standards, and company specifications. Maintain organized design files, revision histories, and technical documentation. Industrial Engineering & Process Optimization: Analyze production workflows, material handling systems, and spatial utilization to identify and eliminate waste. Use Lean, Six Sigma, or time and motion analysis techniques to improve productivity and space efficiency. Collaborate with operations and manufacturing teams to develop optimized layouts, process maps, and line balancing studies. Support capacity planning, equipment placement, and future scalability of production systems. Develop and implement continuous improvement initiatives for workspace design and process efficiency. Contribute to cost reduction, throughput improvement, and ergonomic optimization projects. Support facility changes and infrastructure upgrades through data-driven design recommendations. Collaboration & Implementation: Partner with cross-functional teams -- including Maintenance, Safety, Facilities, and Manufacturing Engineering to ensure alignment between design intent and operational goals. Provide technical input during construction, installation, or reconfiguration of production and site layouts. Basic Qualifications Bachelors degree in Industrial Engineering, Manufacturing Engineering, Drafting & Design Technology, or a related field. 3+ years of combined experience in industrial engineering, site/facility layout, or drafting/design, preferably in a manufacturing or industrial setting. Proficiency in AutoCAD, Revit, or equivalent drafting/design software. Experience with 3D modeling tools such as SolidWorks, SketchUp, or similar. Strong understanding of manufacturing workflows, ergonomics, and material flow design. Ability to interpret architectural, mechanical, and process drawings. Knowledge of building codes, ADA requirements, and safety regulations. Experience using Lean Manufacturing, Six Sigma, or process improvement methodologies. Familiarity with simulation or optimization tools (e.g., FlexSim, Arena, or Plant Simulation) is a plus. Preferred Skills and Experience Certification in Lean Six Sigma (Green Belt or higher). Experience in factory layout design, automation integration, or industrial facility planning. Knowledge of sustainability and energy-efficient design principles for industrial facilities. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year. Leadership Qualities Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support. High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity. ITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

dormakaba is seeking an Industrial Engineer based in Chino, CA. The Industrial Engineer is responsible for driving Lean system adoption across the plant, carries through complex engineering projects and participates in new product implementations. Serving as a technical resource and mentor within the operations team, partners with cross-functional departments to implement sustainable solutions that enhance operational performance and support continuous improvement capability. HIRING SALARY RANGE: Base Salary $90,000 - $115,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) Please visit our career site for more information on benefits. What you will do Plan and execute projects that reduce waste, improve flow, and support Lean maturity and driving measurable change while ensuring cross-functional alignment Develop and sustain standard work documents, operator visuals, and layered audits Collaborate with EHS to assess risk, redesign workstations, and implement safe practices while integrating safety into continuous improvement without slowing delivery Participate in the manufacturing readiness process for new product introductions, and product changes, including process design, equipment validation, and operator training Use time studies, OEE, and performance data to identify efficiency opportunities, including balancing cost reduction with employee engagement and quality assurance What we require 5+ years of experience in industrial engineering, manufacturing excellence, or continuous improvement roles within a production environment Demonstrated success leading Lean projects, facilitating cross-functional initiatives, and mentoring junior team members Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or a related technical field What we prefer Black Belt certification or equivalent advanced training What we offer Taking Care of our Employees on Day One with Medical, Dental, Vision, Life and Disability Insurance coverage options. No waiting periods! Your health is our priority, we offer Medical Wellness Programs to aid in your well-being Vacation and Personal Time Off We support your growing family; we provide Parental Leave for Moms and Dads! Wisely plan for your future with our 401k Matching plan beginning on Day One Discover your best attributes using CliftonStrengths to pave the way for success at dormakaba Supporting your career development with our Tuition Reimbursement Program Robust culture supporting internal advancement with our Learn and Grow Program 24/7 access to over 15,000 LinkedIn Learning courses to assist in your professional development and to expand on your individual interests. Employee Assistance Programs Voluntary Legal Insurance Unlimited Referral Reward Bonuses Corporate Discounts for shopping, travel and more! Who we are We are at the heart of every place that matters. From automatic doors to cloud-based access management - as a leading global provider in the access solutions market for schools, banks, airports, hospitals, hotels, and many more, we enable seamless movement within secure, safe, and sustainable places. With over 160 years of experience and a focus on excellence and innovation, we offer exciting opportunities to grow in an environment where you can make a real impact. At dormakaba, you are encouraged to take initiative, develop your skills, and build your career alongside 16,000 experts worldwide who are setting industry standards every day. Work in a place where you matter - apply now! #LI-RA1 #LI-Onsite

dormakaba is seeking an Industrial Engineer based in Chino, CA. The Industrial Engineer is responsible for driving Lean system adoption across the plant, carries through complex engineering projects and participates in new product implementations. Serving as a technical resource and mentor within the operations team, partners with cross-functional departments to implement sustainable solutions that enhance operational performance and support continuous improvement capability. HIRING SALARY RANGE: Base Salary $90,000 - $115,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) Please visit our career site for more information on benefits. What you will do * Plan and execute projects that reduce waste, improve flow, and support Lean maturity and driving measurable change while ensuring cross-functional alignment * Develop and sustain standard work documents, operator visuals, and layered audits * Collaborate with EHS to assess risk, redesign workstations, and implement safe practices while integrating safety into continuous improvement without slowing delivery * Participate in the manufacturing readiness process for new product introductions, and product changes, including process design, equipment validation, and operator training * Use time studies, OEE, and performance data to identify efficiency opportunities, including balancing cost reduction with employee engagement and quality assurance What we require * 5+ years of experience in industrial engineering, manufacturing excellence, or continuous improvement roles within a production environment * Demonstrated success leading Lean projects, facilitating cross-functional initiatives, and mentoring junior team members * Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or a related technical field What we prefer * Black Belt certification or equivalent advanced training What we offer * Taking Care of our Employees on Day One with Medical, Dental, Vision, Life and Disability Insurance coverage options. No waiting periods! * Your health is our priority, we offer Medical Wellness Programs to aid in your well-being * Vacation and Personal Time Off * We support your growing family; we provide Parental Leave for Moms and Dads! * Wisely plan for your future with our 401k Matching plan beginning on Day One * Discover your best attributes using CliftonStrengths to pave the way for success at dormakaba * Supporting your career development with our Tuition Reimbursement Program * Robust culture supporting internal advancement with our Learn and Grow Program * 24/7 access to over 15,000 LinkedIn Learning courses to assist in your professional development and to expand on your individual interests. * Employee Assistance Programs * Voluntary Legal Insurance * Unlimited Referral Reward Bonuses * Corporate Discounts for shopping, travel and more! Who we are We are at the heart of every place that matters. From automatic doors to cloud-based access management - as a leading global provider in the access solutions market for schools, banks, airports, hospitals, hotels, and many more, we enable seamless movement within secure, safe, and sustainable places. With over 160 years of experience and a focus on excellence and innovation, we offer exciting opportunities to grow in an environment where you can make a real impact. At dormakaba, you are encouraged to take initiative, develop your skills, and build your career alongside 16,000 experts worldwide who are setting industry standards every day. Work in a place where you matter - apply now! #LI-RA1 #LI-Onsite

We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life-from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group-57,000+ engineers in 30 countries-we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As a Manufacturing Industrialization Engineer you will be responsible for; Manufacturing Line & Facility Industrialization: Support the industrialization and startup of facility and Center of Excellence, executing hands-on manufacturing engineering activities to enable a stable ramp to LRIP and full-rate production. Layout, Flow & Line Design: Develop overall and station-level manufacturing layouts (2D/3D as applicable). Design and validate production flows supporting mixed-model builds, modular and parallel processing, and process branching/merging to ensure efficient throughput and scalability. Capacity Modeling & Line Balancing: Build and validate line balance models, TAKT alignment, station loading, and WIP levels. Physically test and verify cycle times, identify bottlenecks, and support equipment sizing and resource planning. Tooling, Fixtures & Automation: Coordinate with tooling and automation teams regarding facilities requirements, installation logistics, and factory verification. Identify opportunities for automation and advanced manufacturing technologies to improve safety, quality, and productivity. Quality & Yield Improvement: Support definition and integration of quality checkpoints, inspection methods, and test equipment. Perform FPY analysis, support pilot runs, and drive corrective actions to achieve ≥95% yield through ATP during validation builds. Material Flow & Handling: Design and improve material handling processes to minimize touchpoints and prevent damage. Define standard WIP, kanban loops, material presentation methods, and internal inventory buffers to support uninterrupted production. Process Documentation & MES Support: Oversee creation of work instruction documentation, standard work, and routing implementation. Support routing updates and integration of work instructions into MES and related digital manufacturing systems. Pilot Runs, Validation & Training Support: Support physical line installation, pilot builds, and final validations. Assist with operator training, LRIP readiness, and initial go-live activities to stabilize production. Cross-Functional Collaboration: Work closely with Manufacturing, Design Engineering, Quality, Supply Chain, and Operations teams to resolve production issues, support supplier quality containment, and continuously improve manufacturing processes. Qualifications; Education: Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related technical field. Experience: 5+ years of experience in manufacturing engineering, industrialization, or production line support, preferably in aerospace, defense, or complex electromechanical manufacturing. Skills: Hands-on experience with line balancing, cycle time analysis, tooling and fixture design, lean manufacturing principles, MES environments, and basic automation or Industry 4.0 technologies. Travel is a requirement for this position Salary Range: $70,000 - $120,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

We are seeking an experienced Industrial HMI Engineer to design, develop, and maintain human-machine interface (HMI) systems for complex industrial and process automation environments. The ideal candidate will have hands-on expertise in Rockwell Automation FactoryTalk View SE, FactoryTalk Linx, and integration with CompactLogix / ControlLogix PLC platforms. This role bridges operations, controls engineering, and process visualization-ensuring safe, reliable, and intuitive system interfaces for operators and engineers. Key Responsibilities Design & Development Architect and implement new HMI applications using FactoryTalk View SE (distributed and standalone configurations). Configure and optimize FactoryTalk Linx, FactoryTalk Directory, and RSLinx Enterprise communications. Develop P&ID-based process screens, navigation structures, alarm banners, and trend displays. Implement dynamic graphics, tag-based visibility, security-based user interfaces, and custom scripts. Integration & Commissioning Integrate HMI systems with Rockwell CompactLogix and ControlLogix PLCs via Ethernet/IP. Coordinate with PLC programmers to map tags, alarms, and state/mode logic. Support HMI deployment on operator workstations and thin clients (Terminal Services, VMWare, or ThinManager environments). Participate in site commissioning, FAT, and SAT testing of automation systems. Operations & Support Troubleshoot live HMI issues, alarms, and communications between PLCs, servers, and clients. Perform system upgrades, backup management, and version control within FactoryTalk View SE. Maintain documentation: tag lists, screen inventories, alarm configurations, and user manuals. Ensure HMI systems meet ISA-101, ISA-18.2, and corporate HMI design standards for usability and safety. Cross-Functional Collaboration Work closely with process engineers, I&E technicians, and safety teams to represent real-time plant data accurately. Participate in safety system integration and interlock visualization. Required Qualifications Bachelor's degree in Electrical Engineering, Controls/Automation Engineering, Computer Engineering, or equivalent technical discipline. 3-7 years of experience designing and deploying HMI/SCADA systems in an industrial setting. Proven expertise with: FactoryTalk View SE (Site Edition) FactoryTalk Linx / RSLinx Enterprise Rockwell CompactLogix or ControlLogix PLCs Experience with Ethernet/IP networks, data servers, and CIP tag addressing. Strong understanding of industrial processes (e.g., power generation, chemical, nuclear, or thermal systems). Familiarity with Windows Server environments, Active Directory, and industrial network segmentation. Preferred Skills Knowledge of FactoryTalk View ME, PanelView Plus, and ThinManager. Experience with OPC-UA/DA, SQL data logging, or historian systems (FactoryTalk Historian, OSIsoft PI). Experience following ISA-106 (Procedural Automation for Continuous Process Operations). Understanding of safety systems integration (SIL-rated loops, interlocks, trip displays). Strong scripting skills in VBA or structured text for custom HMI logic. Exposure to virtualized environments (VMware, Hyper-V) and redundant SCADA servers. Attributes Excellent communication and documentation skills. Detail-oriented with strong problem-solving mindset. Ability to work independently and collaborate cross-functionally with process, electrical, and safety teams. Comfortable working in high-reliability industrial environments with strict configuration control. Example Deliverables FactoryTalk View SE project file (.SE) HMI/PLC tag mapping spreadsheets Alarm and event summary documentation User interface mockups and ISA-101 compliance checklists Version control and deployment procedures

This role is with RippleMatch's partner companies. RippleMatch partners with hundreds of companies looking to hire top talent. About RippleMatch RippleMatch is your AI-powered job matchmaker. Our platform brings opportunities directly to you by matching you with top employers and jobs you are qualified for. Tell us about your strengths and goals - we'll get you interviews! Leading employers leverage RippleMatch to build high-performing teams and Gen Z job seekers across the country trust RippleMatch to launch and grow their careers. Requirements for the role: Bachelor's degree in Industrial Engineering, Systems Engineering, or a related field. Internship or co-op experience in industrial engineering or related fields is a plus. Strong foundational knowledge in manufacturing processes, systems optimization, and efficiency improvement methodologies. Proficiency in using industrial engineering tools and software, such as CAD for layout designs and simulation software. Understanding of Lean Manufacturing, Six Sigma, or other continuous improvement methodologies. Ability to analyze work processes, workflows, and systems to identify inefficiencies and recommend improvements. Basic knowledge of project management principles and the ability to manage small projects or components of larger projects. Excellent problem-solving skills and attention to detail. Strong organizational skills, with the ability to manage multiple tasks and priorities effectively. Effective communication and interpersonal skills, capable of working collaboratively across different teams and departments.

The Intern will engage with the Manufacturing Engineering team to optimize the manufacturing process. The Intern will assist with data collection and analysis of tool data, generate reports, and support continuous improvement projects (CIP). ESSENTIAL JOB FUNCTIONS Support the Manufacturing Engineering team in the design and implementation of new manufacturing processes. Assist with the development and maintenance of manufacturing process documentation, maintenance instructions, and manuals. Participate in continuous improvement initiatives to boost the efficiency and quality of our manufacturing operations. Assist in conducting data analysis and developing recommendations for process improvement. Observe and document manufacturing processes, for example, the Hot stamping setup. Participate in cross-functional projects and provide support as needed. Perform engineering change processes as necessary to support existing products Conducts observations and documents the process of different types of mold changes on injection molding machines. Create video files of the setup processes. Maintains reliable and consistent attendance, including being punctual, dependable, and flexible to potential schedule changes to meet the needs of the department and the organization. Executes each essential duty satisfactorily to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receiving and giving feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follows all department quality standards/criteria. Raises concerns and issues to management. Understands department's key performance indicators (KPIs) and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Junior or Senior pursuing a Bachelor of Science degree in Mechanical, Manufacturing, Automation, or Industrial Engineering or verifiable experience and vocational training in automation applications. Coursework and/or knowledge of statistics and tooling design (SolidWorks a plus). Ability to read and prepare technical documentation. Mechanical aptitude and willingness to learn. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Proficient in Microsoft Office Suite PREFERRED QUALIFICATIONS 2D or 3D drawing capability for automated equipment design on AutoCAD or SolidWorks Basic knowledge and understanding of most industrial codes required (ANSI, ADA, OSHA, NEC, NFPA, IBC, ISO, DIN) Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Operation of foot controls or repetitive foot movement PPE Requirements Safety glasses Utility gloves Leather top, slip-resistant shoes, safety-toe shoes Currently, Cambro does not provide sponsorship for employment visas (e.g., F-1, H-1B) and will not offer such sponsorship in the future. Applicants must already have full-time work authorization in the United States without requiring sponsorship. Intern COMPENSATION RANGE: $18.04 - $25.00 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Industrial Engineer The Industrial Engineer is responsible for enhancing labor productivity, workflow efficiency, and operational processes across all aspects of store operations while upholding strict confidentiality and business integrity. This role applies industrial engineering principles to design labor models, optimize operational workflows, and deliver measurable financial and service improvements across a dynamic grocery retail environment. The ideal candidate combines data-driven analysis, operational expertise, and a collaborative approach to drive positive ROI while safeguarding sensitive operational strategies. Responsibilities: Analyze labor deployment, work methods, and workflows across various grocery retail operations, including customer service, merchandising, inventory handling, receiving, and food service areas. Utilize benchmarking industrial data to build labor modeling and standards with confidentiality and professionalism. Develop, maintain, and continuously improve engineered labor standards based on time studies, motion analysis, and operational observations. Collaborate with Store Operations, HR, Training, Supply Chain, and Finance teams to support labor planning, performance goals, and operational initiatives. Lead projects aimed at improving receiving, stocking, replenishment, checkout operations, and in-store logistics processes. Provide financial impact analysis to support labor initiatives and operational improvement projects. Utilize data analysis tools and workforce systems to monitor labor KPIs and identify improvement trends. Work closely with IT, Business Intelligence, and Payroll teams to strengthen labor tracking and reporting capabilities. Stay updated on industry best practices in grocery retail operations, labor management, and process improvement. Perform other duties as assigned by management. Qualifications: A Bachelor's degree in Industrial Engineering, Operations, Supply Chain Management, Business, or a related field. 5+ years of experience in industrial engineering, operations improvement, or labor optimization, preferably in grocery retail or high-volume retail settings. Bilingual in English and Mandarin Chinese is preferred. Lean Six Sigma certification preferred or equivalent experience in process improvement initiatives. Proficiency with Microsoft Excel and data analysis tools; experience with SQL, Access, or visualization platforms (e.g., Tableau, Power BI) is a plus. Familiarity with labor management systems (LMS) and scheduling tools is a plus. Strong ethical sense to maintain confidentiality of sensitive company information and data. Strong understanding of time studies, labor standards development, and operational workflow analysis. Practical understanding of grocery store operations, including front-end, perishables, dry goods, receiving, and food service departments. High level of professionalism and discretion when working with sensitive operational and labor data. Clear communication skills to influence operational teams and support change initiatives. Ability to work effectively in a fast-paced, dynamic retail environment.

Logistics at full potential. At GXO, we're constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you'll have the support to excel at work and the resources to build a career you can be proud of. 1st Shift, Monday - Friday, 8:00am - 5:00pm As the Industrial Engineer, you will be responsible for identifying facility design and personnel requirements to help keep our operations running smoothly. You will be challenged with finding ways to improve productivity and developing strategies to help people work smarter. You'll also develop work instructions and update standard operating procedures. As a part of the GXO team, you'll have a starring role in helping us continue to provide daily business solutions for our global customers. Pay, benefits and more. The annual salary range for this role is $68640 - $81824 / Year. GXO, in good faith, believes this is the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California. This rate may be modified in the future. We offer a comprehensive package of benefits including paid time off, medical/dental/vision insurance, 401(k), and other benefits to eligible employees. You can apply for this role by clicking on the Apply now button at the bottom of this posting (or through the Employee Job Hub if you are a current GXO employee). Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. What you'll do on a typical day: * Identify facility design requirements based on activity levels, product dimensional profiles, product flow and transportation methods * Develop production time studies, head count analyses, downtime analyses, efficiency improvement plans, warehouse slotting and SKU velocity analyses * Identify bottlenecks and improve flow; analyze inbound, outbound and inventory operations to create and maintain optimum warehouse operations * Perform value stream mapping, process improvements and standardization across multiple sites * Assist pricing and solutions teams in providing operational cost and other key info needed for RFPs * Track KPIs and develop basic analytics for all operational metrics * Work with vendors to identify operational equipment and automation solutions * Develop and manage project plans for major operational improvement activities * Support the Maintenance department by developing lists of critical spare parts, min/max tracker * Daily P&L tracking for Finance * Convert contract documents, proposals and statements of work into work instructions and operating procedures; submit ISO-compliant work instructions and standard operating procedure documents to the Quality Management System (QMS) What you need to succeed at GXO: At a minimum, you'll need: * Bachelor's degree in Industrial Engineering or a related field, or equivalent related work or military experience * 1 year of engineering experience * Experience with analytical tools such as flow charts, Pareto charts, cause and effect diagrams, run charts, etc. * Microsoft Office experience It'd be great if you also have: * Lean/Six Sigma Black Belt designation * Availability to travel up to 25% * Experience with BI software such as Tableau, Power BI, Data Studio, etc. * Excellent verbal and written communication skills; ability to present clean, organized and thorough information and data appropriate for intended audience * Ability to compose thorough and detailed technical documentation, job aids, procedure manuals, etc. * Ability to develop insightful, value-added and actionable research with detailed explanations regarding drivers of those results * Ability to produce unambiguous, comprehensive and accurate interpretations We engineer faster, smarter, leaner supply chains. GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. We are proud to be an Equal Opportunity employer including Disabled/Veterans. GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement here.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Manufacturing Intern - RialtoInterns spend the summer working directly on high impact projects within one of our manufacturing departments. Interns work in a fast-paced, innovative environment where they will be asked to be a key part of our operations. During this 10-12 week internship, participants are encouraged to think outside the box and use a continuous improvement mindset to approach projects and come up with solutions. Interns gain hands on experience in work related to their field of study. Essential Functions Rotate through multiple areas of the manufacturing plant to gain an overall understanding of the manufacturing process. Provide support to plant team members to gain hands on experience with production methods, machines, and processes. Assist with research on new and existing projects and support major decision making. Receive intellectual and creative opportunities to tackle a problem and develop proposed solutions. Attend department meetings and action plan based on feedback. Learn to collaborate and communicate across all levels of the organization. Create a presentation on internship experience, projects, and outcomes and present to department leadership. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: Current Junior/Rising Senior pursuing a Bachelor's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$23.52 - $31.16 / Hourly Benefits *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Company: The Boeing Company Boeing Global Services, Cabin, Modifications, Maintenance (CMM) is a One Boeing opportunity to engage across the business units and global design centers. BGS CMM - Systems Engineering is seeking a high performing Extended Operations Performance Standards (ETOPS) Engineer (Mid-Level, Lead or Senior) to join this talented and fast-paced team, reporting to the BGS CMM Avionics Manager in Long Beach, California. The engineer will join and inspire a group of employees performing engineering, technical, and regulatory tasks that provide engineering solutions for multiple Boeing Global Services commercial modifications business units as well as integrating with a Boeing Commercial Airplanes (BCA) ETOPS team. The position includes responsibility for developing and executing project and process plans, as well as implementing policies and procedures. This role includes a significant level of developing and mentoring systems engineers in ETOPS design, integration and certification. The primary focus for this role is ETOPS which ensures Boeing aircraft are designed, built, tested, and supported for extended operations (especially over water), enabling Boeing customers to fly long range missions in a more direct route to/from suitable airports. ETOPS is heavily regulated and has considerable certification aspects, including focus on safety, airplane maintenance and operational procedures. This work involves close coordination with Boeing engineers and certification specialists to ensure all activities required for ETOPS certification of Boeing commercial and military commercial derivative airplanes are accomplished. As an ETOPS Engineer, you will be supporting all airplane programs on new, amended, and/or supplemental type certification and major airplane modification programs. You will be expected to coordinate, plan, prepare, review and execute ETOPS applicant certification work for submittal to the certification authorities, including the FAA, EASA, and other international validation bodies. This position will give the candidate the opportunity to develop airplane level thinking and provide exposure to multiple disciplines/areas (such as propulsion, flight controls, avionics, safety, maintenance, regulatory administration) and many levels of program leadership throughout the Boeing Company. Position responsibilities: Perform airplane-level evaluations of changes impacting ETOPS on multiple platforms (737, 747-8, 757 , 767, 777, 787) including retrofit modifications. Perform system-level evaluations and provide assistance related to ETOPS-significant systems in propulsion, systems, avionics, etc. Using project management practices, provide inputs to ETOPS certification plans and manage deliverables to closure. Prepare Major / Minor Determinations for ETOPS DAEs. Develop analytical, reliability, and empirically based ETOPS assessment reports. Review safety assessments (including Fault Tree Analysis) that pertain to ETOPS missions/diversions Develop configuration and conformity requirements for ETOPS including negotiating as required with Program, Regulatory Agencies, Suppliers, and Manufacturing/Quality. Integrate with BCA ETOPS team to support airplane program meetings and project reviews. Support customers (ETOPS) and in-service reliability tracking (ETOPS). Familiar with FAA regulations for ETOPS (e.g., 14 CFR 25.1535 & Appendix K). Able to perform Applicant role and complete training for ETOPS discipline specific and BPM 15.4 DAE role for ETOPS. Understanding of Boeing Procedures Manual Sections 15.1 and 15.4. Familiar with ETOPS Configuration, Maintenance and Procedures (CMP) document(s) and CMP change proposals and also with the ETOPS requirements for the Airplane Flight Manual (AFM) and lead on AFM change proposals. Knowledge and experience with the BPSM Process (RCA, Corrective Actions, etc.) Other skills of this role: Development of specifications, architectural and configuration concepts for associated vehicle systems to meet customer and regulatory requirements. Configuration and design of ETOPS systems and components to meet all vehicle design and performance criteria. Use of various testing, analysis, modeling, and simulation tools to estimate or calculate ETOPS system performance and demonstration of compliance to the ETOPS regulations. Development of concepts for future ETOPS systems to meet anticipated requirements. Works under minimal direction. Future Skill Development and Statement of Work Be able to document Major/Minor Determinations in Boeing Design Change Classification System (DCCS) tool and BERST as a ETOPS DAE. Basic Qualifications (Required Skills / Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. 3+ years of experience in Aerospace and Systems Engineering. Preferred Qualification (Desired Skills / Experience): 5+ years of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) 10+ years of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Experience with Airplane Extended Operations (ETOPS) certification, design, integration and analysis in systems, propulsion, electrical, etc. Knowledge of aircraft design, systems engineering, model-based engineering, system integration, requirements management, propulsion engineering, and turbomachinery. Knowledge of EASA regulations for ETOPS. Understanding and application of Project Management techniques such as scheduling, resource management, and performance measures. Experience with Systems Troubleshooting. Willing & able to travel 10% of the time domestically and internationally. Identify and trade alternatives (i.e., trade studies), select/recommend the best plan for mitigating complex risks. Experience with risk identification and mitigation plans. Implement/execute plans for mitigating risk and establish appropriate performance tracking metrics to track risk burn down over time. Ability to troubleshoot hardware, software, and anomalies, with an understanding of how to accomplish activities in a restricted configuration-controlled system environment. Ability to help develop, mentor and coach less experienced staff. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Mid-Career (Level 3): $114,750- $155,250 Senior (Level 4): $138,550- $187,450 Principal (Level 5): $165,750- $224,250 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)