Industrial engineer jobs in Palm Beach Gardens, FL - 75 jobs

Job Title Industrial Engineer We looking for a new Industrial Engineer to join the Industrial Engineering team in our Stuart, Florida aerospace manufacturing site. The Industrial Engineering department is responsible for performing advanced analysis on scheduled and forecasted demands, capacity analysis, reporting status of business operations, maintaining business KPIs, building recovery and operations plans to facilitate on-time delivery of products to the customers, maintenance of time standards, optimal build flows, and facility layouts. Job description Develop a site capacity plan, including headcounts, efficiency targets, and capacity assumptions Analyze and develop schedules and operating plans for production Create recovery plans to facilitate the on-time delivery of products to customers Perform analysis on product cycle, takt, and lead times to support rate readiness and recovery initiatives Create, maintain, track, and distribute reports for business KPIs Compile reports for shop floor mechanics, shop floor management, and executive management Create tools and methods to measure and track shop floor milestones Conduct audits and support 5S initiatives in support of production Establish, revise, and maintain time standards in SAP for work orders and work order operations Conduct time studies, utilization studies, and other direct observation-based studies to update and improve time standards Analyze overall process effectiveness and compile reports on potential improvements Utilize value stream mapping, process flow, and other Lean Manufacturing tools to identify bottlenecks and improve efficiency Assist with planning and optimization of equipment layouts, floor space, work cells, workflow, and safety precautions in an industrial manufacturing environment Support project management for capital equipment acquisition, prepare cost estimates, timelines, and budgets for proposed projects Perform cost analysis in support of business development and spare pricing Perform non-recurring engineering (NRE) activities for work transfer and business development proposals, including ROM impact estimates and unit hours to learning curve estimates Process engineering change packages for impact on budget and methods of manufacture Perform responsibilities and duties as assigned in alignment with SEED initiatives and IPT structure Other duties as assigned Qualifications Master's or Bachelor's degree in Industrial Engineering, Systems Engineering, or Supply Chain Engineering from an accredited university 5-7+ years of experience in Industrial Engineering Experience working in an Aerospace manufacturing environment is required. Preferably at a low-rate manufacturing site. Basic proficiency with 2D/3D CAD Software Advanced proficiency with data and process analytics (PowerBI is a plus) Basic proficiency with generic programming languages (VBA, SQL, Python, C) Basic proficiency with database systems (SQL) Excellent communication and presentation skills Excellent organizational, planning, and time management skills Ability to train additional personnel in job duties Stuart Florida Site Requirements: Pursuant to International Traffic Arms Regulations (“ITAR”) and the Export Administration Regulations (“EAR”), applicants for SELECT positions will be required to provide proof of U.S. Citizenship, U.S. Permanent Residence, or U.S. Immigration Status in order to meet the minimum qualifications for those select positions. All inquiries related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. Who we are: Daher is a global industrial group specializing in aerospace manufacturing and logistics. With the stability provided by its family ownership, Daher has been committed to innovation since its creation in 1863. Daher Aerospace in Stuart Florida is a manufacturer of metallic and composite Aerostructure. The Stuart site is a key U.S. facility focused on assembling these complex aerostructures for Boeing and Gulfstream aircraft. With over 500 employees and 440,000 sq. ft. of production space, the site supports major programs like the 767, 777, and KC-46. Since its acquisition in 2022, Daher has invested in workforce development and infrastructure, positioning Stuart for future growth and final assembly operations. Join Daher to... Integrate a family group with a long-term vision Make a difference in a developing company Develop new skills thanks to the diversity of your missions Take part in a human and industrial adventure full of challenges Innovate and think outside the box by integrating a stimulating environment Profile and other information related to the position The compensation range is $90,000 to $100,000 in base salary plus an annual target bonus. Any prospective offer will take into account the overall experience the successful candidate brings to the role. Offers to selected candidates will be made on a fair and equitable basis, taking into account specific job-related skills and experience. At Daher, your total rewards package is more than just your base salary as we offer a full benefit package including Medical, Dental, Vision, 401(k), Life insurance, Short- and Long-Term Disability, Paid Time Off, Paid Holidays and more. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. Must be able to communicate verbally and have the ability to hear. The employee frequently is required to stand, walk, reach with hands and arms, and stoop or crouch. The employee is occasionally required to sit. The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds. Have full range of motion required to perform the job functions. Maintain steady hand-eye coordination. Reach in all directions and in potentially awkward positions. All applicants are considered for all positions without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical/mental disability, medical condition, military/veteran status, genetic information, marital status, ethnicity, alienage, or any other protected classification, in accordance with applicable federal, state, and local laws. By completing an application with Daher, you are seeking to join a team of hardworking professionals dedicated to consistently delivering outstanding service to our customers and contributing to the financial success of the organization, its clients, and its employees. Equal access to programs, services, and employment is available to all qualified persons. Those applicants requiring accommodation to complete the application and/or interview process should contact an HR representative. Daher complies with the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local law. Working hours Full time Salary 70000 Region Florida Location Stuart Experience Languages English Creative and entrepreneur, develop your career at the heart of the biggest industrial challenges with Daher!

Job Description Octagon Talent Solutions & ITRADE STEM is an organization dedicated to accelerating job growth and driving economic sustainability in the space, technology, energy, and manufacturing sectors. We manage comprehensive apprenticeship programs and foster strategic wealth creation, ensuring a prosperous future for businesses and the workforce alike. Our commitment to using advanced technology and maintaining long-term relationships makes us a leader in cultivating talent and innovation. We are seeking a seasoned professional to join our team as a Trainer of Manufacturing & Industry 4.0 in the Miami, Fort Lauderdale, and/or Palm Beach, FL areas. This role requires a blend of practical experience and academic expertise to effectively teach and mentor the next generation of manufacturing professionals. The ideal candidate will possess a deep understanding of CNC machining and Industry 4.0 technologies, alongside a passion for fostering strong relationships with students and local industries. Key Responsibilities: Instruction & Curriculum Development: Deliver high-quality instruction in Manufacturing & Industry 4.0, including CNC machining, automation, robotics, and digital manufacturing technologies. Develop, oversee and/or update curriculum to stay aligned with industry advancements. Student Engagement: Cultivate a dynamic learning environment that encourages student participation and success. Provide mentorship and career guidance to students, preparing them for roles in the manufacturing industry. Apprenticeship Programs: Design, implement, and/or oversee apprenticeship programs that reflect the cultural and operational needs of partnering companies in the South Florida area. Industry Partnerships: Establish and nurture strong relationships with local industries to facilitate on-the-job training opportunities and ensure alignment between academic programs and industry requirements. Program Management: Manage and coordinate academic programs, ensuring they meet educational standards and industry expectations. Participate in continuous improvement processes to enhance program effectiveness. Research & Development: Stay current with the latest trends and advancements in Industry 4.0. Engage in research activities that contribute to the field and support the academic community. Required Qualifications: Bachelor's degree or higher in Manufacturing Engineering, Industrial Technology, a related field; or equivalent practical experience in the manufacturing industry. Minimum of 5 years of practical experience in CNC machining and manufacturing processes for Industry 4.0. Strong knowledge of digital manufacturing technologies, automation, robotics, and/or data analytics in the context of Industry 4.0. Experience in establishing and maintaining partnerships with local industries for the purpose of providing apprenticeship and on-the-job training programs. Excellent communication and interpersonal skills, with the ability to engage and motivate students and industry professionals. Proficiency in English, both written and verbal, is required. Bilingual proficiency in English and Spanish is an asset. What We Offer: Competitive compensation. Opportunity to work with a dynamic team committed to driving economic sustainability and job growth. Access to cutting-edge technology and resources to support your professional development. A supportive environment that values innovation, collaboration, and continuous learning. --- At ITRADE STEM, we don't just envision a brighter future-we actively build it. Join us in our mission to shape the manufacturing leaders of tomorrow!

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Paid time off Vision insurance Chemical Engineer (Thorium Metallurgy & Chemistry) Location: Palm Beach Gardens, FL Employment Type: Full-time, Exempt About AMPERA AMPERA is redefining clean, sovereign energy with compact, ultra-safe nuclear systems that power AI, industry, and defense with zero emissions and unmatched reliability. Our modular micro-reactors combine the best of fusion and fission to deliver scalable, deployable, and inherently safe energy anywhere from AI data centers to remote or defense operations. As a fast-growing company, AMPERA merges the agility of a startup with the ambition of a global energy leader. Joining us means becoming part of a bold mission to revolutionize how the world generates and delivers power through advanced thorium fuel chemistry, nuclear metallurgy, and next-generation materials science. Position Overview AMPERA is seeking a Chemical Engineer with deep expertise in thorium metallurgy, fuel chemistry, and chemical process engineering to lead the development of AMPERAs thorium-based fuel cycle. This role will focus on the synthesis, purification, and metallurgical processing of thorium and associated fuel compounds for use in hybrid fission-fusion micro-reactors. The ideal candidate will have hands-on experience in molten salt chemistry, actinide metallurgy, fuel reprocessing, and high-temperature chemical systems, as well as familiarity with nuclear-grade material qualification and safety standards. Key Responsibilities Lead thorium and actinide chemistry R&D, including oxide reduction, alloy formation, and purification processes. Develop and optimize metallurgical processes for thorium-based fuels and structural materials under inert and reducing atmospheres. Design and operate experimental setups involving high-temperature furnaces, glove boxes, and corrosion-resistant systems. Characterize chemical and physical properties of thorium compounds (e.g., ThO, ThF, Th-U alloys) using analytical and spectroscopic methods. Collaborate with fuel development and materials teams to integrate thorium fuels with TRISO and LMJ-based fabrication systems. Perform thermodynamic and kinetic modeling to support process scale-up and reactor integration. Ensure compliance with environmental, health, and radiological safety standards (DOE, NRC, EPA). Document and present research results, contributing to fuel qualification and licensing efforts. Mentor junior engineers and support cross-functional collaboration between chemical, materials, and reactor teams. Qualifications Ph.D. or M.S. in Chemical Engineering, Metallurgical Engineering, or Nuclear Chemistry. 7+ years of experience in thorium or actinide chemistry, nuclear materials processing, or metallurgical R&D. Strong knowledge of high-temperature thermochemistry, reduction processes, and alloy formation. Experience with molten salt systems, fuel reprocessing, or metal refining preferred. Familiarity with radiation safety protocols, glove box handling, and contamination control. Excellent analytical, documentation, and problem-solving skills. U.S. citizenship or eligibility for security clearance may be required. What We Offer Competitive salary Comprehensive benefits including healthcare, dental, vision, and 401(k). Opportunity to advance thorium-based nuclear fuel innovation for the next generation of clean energy systems. A collaborative, mission-driven environment where chemistry and engineering drive real-world impact. Career growth potential as AMPERA expands its thorium fuel and materials programs.

Join our dynamic team as a Manufacturing Engineer, focusing on process development and optimization for components and systems. Lead projects to improve efficiency, reduce waste, and enhance product quality using Lean and Six Sigma principles. Responsibilities * Design, implement, and improve manufacturing processes for components and systems. * Optimize workflows to reduce waste and improve efficiency using Lean and Six Sigma principles. * Create and maintain work instructions, sequence cards, and process documentation. * Lead or support projects involving equipment installation, acquisition, and production line changes. * Collaborate with teams such as Engineering, Quality, and Assembly to ensure smooth product launches and engineering changes. * Manage timelines, resources, and budgets effectively. * Drive projects focused on improving cost, quality, delivery, and safety. * Analyze production data, identify root causes, and implement corrective actions. * Conduct time studies, line balancing, and ergonomic assessments. * Develop strategies for equipment, layouts, and material flow to meet business goals. * Ensure processes meet safety, quality, and regulatory standards. * Work with Quality Assurance to resolve issues and strengthen control plans. * Support audits and compliance with ISO and other standards. * Provide hands-on support to resolve production issues. * Recommend tooling, fixtures, and equipment upgrades. Essential Skills * Strong knowledge of manufacturing processes, equipment, and quality control. * Ability to manage multiple projects in a fast-paced environment. * Excellent analytical and problem-solving skills. * Familiarity with ERP systems and resource planning. * Continuous Improvement * Root Cause Analysis * Lean Manufacturing * 4+ years experience in a manufacturing environment * Bachelor's degree in Engineering Work Environment This position requires working onsite, with time split between the manufacturing floor and office environments. The role involves hands-on engagement with production processes, fostering a collaborative atmosphere for continuous improvement. Job Type & Location This is a Contract to Hire position based out of Fort Lauderdale, FL. Pay and Benefits The pay range for this position is $40.00 - $55.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fort Lauderdale,FL. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.

WGI is looking for an engineering professional with 0-4 years of experience to work with our Civil team in West Palm Beach, FL. This individual will be responsible for project production tasks and assisting the public works team consisting of Project Manager, Project Engineers, other Graduate Engineers, and Project Designers in the preparation and coordination of civil engineering public infrastructure projects. At WGI, you will find talented, passionate associates providing exceptional service in collaborative, team-driven environments, all while having fun and enjoying the work they do. WGI prides its reputation as one of the nation's top consulting firms -- and our awards support our beliefs. We strive to stay ahead of the curve investing in the latest tools and technology. We are always looking for remarkable individuals to join our team and help expand our visionary approach. One of our core values is Passion for People! If you think you are an innovative team-player and want to shape the built world, join our WGI team today! WGI offers a complete Benefits package including: Medical, Dental, Vision, LTD & STD, Life Insurance, 401k with match, PTO, Holidays, HSA with company contribution, Pet insurance, and Employee assistance program. #LI-Onsite Responsibilities Assist or lead in production of construction plans, specifications, and developing cost estimates for new and existing public infrastructure projects in the San Antonio area and across Texas Apply AutoCAD and/or Microstation software in drafting design plans for public works (utilities, roadway, and drainage/stormwater infrastructure). Conduct field visits to understand existing site conditions and evaluate the scope of work to be designed and ultimately constructed. Prepare permitting application packages in coordinating with governing agencies and department. Prepare engineering reports, construction specifications, and bid documents Attend meetings with team members in coordination with client team members. Address review comments received and prepare plan updates in AutoCAD and/or Microstation software. Perform site visits following the completion of design and bidding to observe construction and prepare construction observation reports Attend industry events for networking and relationship building and become involved in the engineering community and related professional organizations. Qualifications Bachelor of Science degree in Civil Engineering 0-4 years' experience in public infrastructure projects with a focus on design production and construction document preparation. Engineer in Training (EIT) license obtained or scheduled to sit for exam within 6 months of employment. AutoCAD and/or Microstation design experience is strongly preferred Applicants must be currently authorized to work in the U.S. on a full-time basis. We are unable to sponsor or take over sponsorship of employment visa Physical Demands The physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed in an office setting. Hand-eye coordination is necessary to operate a computer, keyboard and mouse. Use of a telephone headset will allow for virtual communication with team members through Zoom and/or Microsoft Teams. While performing the duties of this job, the employee is often required to sit for prolonged periods, use hands/fingers to handle, feel or operate objects, tools or controls and reach with hands and arms, speak and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. If you have what it takes to join our growing organization and want to be part of a dedicated team, please apply today. In return, WGI provides a competitive salary and an outstanding work environment. WGI is an Equal Opportunity Employer/Veterans/Disabled. WGI does not accept any unsolicited resumes. Should any 3rd party agency or recruiter forward or submit any resume(s) to a WGI associate without a pre-existing contractual agreement, the submitted resume(s) will be deemed the property of WGI, and no placement fee will be provided. All agencies and vendors are required to have a signed WGI vendor agreement from the WGI Chief HR Officer permitting them to work directly through our Talent Acquisition team. Obtaining this signed vendor agreement is the only way you will receive payment. Verbal or written commitments from any other member of our staff will not be binding. All third-party recruiting/supplemental staffing agencies are expected to familiarize themselves and abide by this policy. We can recommend jobs specifically for you! Click here to get started.

Measure the tact time on equipment and improve efficiency for measured improvement Create and update Routing/process map development and updates of all new products Completion of line trial testing and reporting Conduct tooling analysis for new products and catalogue new equipment or tooling into database Design and 3D print applicable machine or parts tooling

About GoodLeap:GoodLeap is a technology company delivering best-in-class financing and software products for sustainable solutions, from solar panels and batteries to energy-efficient HVAC, heat pumps, roofing, windows, and more. Over 1 million homeowners have benefited from our simple, fast, and frictionless technology that makes the adoption of these products more affordable, accessible, and easier to understand. Thousands of professionals deploying home efficiency and solar solutions rely on GoodLeap's proprietary, AI-powered applications and developer tools to drive more transparent customer communication, deeper business intelligence, and streamlined payment and operations. Our platform has led to more than $30 billion in financing for sustainable solutions since 2018. GoodLeap is also proud to support our award-winning nonprofit, GivePower, which is building and deploying life-saving water and clean electricity systems, changing the lives of more than 1.6 million people across Africa, Asia, and South America. Position SummaryWe are seeking an experienced Quality Engineer to join our fast-paced, agile development team. You will be responsible for ensuring the quality and reliability of our Salesforce based solutions through comprehensive testing strategies and collaboration with development teams. This role requires understanding of Salesforce platform capabilities and modern testing methodologies. Key Responsibilities Testing & Quality Assurance Design and execute comprehensive test plans for Salesforce applications, customizations, and integrations Perform functional, regression, integration, and performance testing across multiple Salesforce environments Test complex business processes involving Flows, custom Lightning components, and third-party integrations Validate data accuracy and integrity across system boundaries Ensure proper testing coverage for deployments using GitHub Actions CI/CD pipeline Test Automation Develop and maintain automated test suites using appropriate tools and frameworks Create reusable test scripts and data sets for efficient regression testing Implement continuous testing practices within our GitHub Actions CI/CD pipeline Collaborate with development teams to integrate testing early in the development lifecycle Salesforce Platform Expertise Test across multiple Salesforce clouds (Sales Cloud, Service Cloud, Financial Services Cloud) and environments (sandbox vs. production) Validate deployments and change management processes Test integrations with external systems through middleware platforms (MuleSoft Anypoint) Test data flows and integrations with AWS S3 and Salesforce Data Cloud Understand and test modern Salesforce features including automation tools Ensure compliance with Salesforce best practices and governor limits Collaboration & Communication Work closely with developers, business analysts, and product owners in agile sprints Participate in sprint planning, daily standups, and retrospectives Document test cases, results, and defects clearly and thoroughly Leverage Salesforce Event Logs for testing validation and issue troubleshooting Communicate testing progress and quality metrics to stakeholders Required Qualifications Experience 5+ years of software quality engineering experience 2+ years of hands-on Salesforce testing experience Strong background in agile/scrum development methodologies Experience with test automation tools and frameworks Proven track record of testing complex enterprise applications Technical Skills Deep understanding of Salesforce platform architecture and capabilities Experience testing Salesforce customizations (Apex, Lightning Components, Flows) Knowledge of Salesforce deployment processes and environment management Experience testing integrations with middleware platforms Proficiency in SOQL and data validation techniques Familiarity with API testing and integration validation Experience with version control systems (Git) and CI/CD pipelines (GitHub Actions) Soft Skills Strong analytical and problem-solving abilities Excellent written and verbal communication skills Ability to work effectively in fast-paced, agile environments Detail-oriented with strong organizational skills Adaptable and quick to learn new technologies and processes Continuous learning mindset to stay current with platform updates Preferred Qualifications Certifications & Training Salesforce Administrator or Platform App Builder certification Additional Salesforce certifications (Advanced Administrator, Platform Developer I) Quality engineering certifications Additional Experience Experience with test automation tools and frameworks Experience with MuleSoft Anypoint Platform Experience with AWS S3 integrations Knowledge of Salesforce Data Cloud Performance testing experience with enterprise applications Experience with Salesforce Event Logs analysis Additional Information Regarding Job Duties and s: Job duties include additional responsibilities as assigned by one's supervisor or other managers related to the position/department. This job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and other skills required for the position. The Company reserves the right at any time with or without notice to alter or change job responsibilities, reassign or transfer job position or assign additional job responsibilities, subject to applicable law. The Company shall provide reasonable accommodations of known disabilities to enable a qualified applicant or employee to apply for employment, perform the essential functions of the job, or enjoy the benefits and privileges of employment as required by the law. If you are an extraordinary professional who thrives in a collaborative work culture and values a rewarding career, then we want to work with you! Apply today! We are committed to protecting your privacy. To learn more about how we collect, use, and safeguard your personal information during the application process, please review our Employment Privacy Policy and Recruiting Policy on AI.

Summary: As the Live Video Production Engineer & Producer (FL), main duties include coordination, operation, and technical support, including but not limited to, video and production equipment, in all Faith Church venues throughout the week including all weekly services, special events, and offsite events. To recruit, train, encourage, and lead video volunteers in production. Perform research, preparation, and practice for best-use of production equipment and video directing to create an environment to best match the production style desired. To upgrade, install and manage all video equipment in all venues. To shoot videos as needed. This position requires its primary duty must be the performance of work requiring invention, imagination, originality or talent in a recognized field of artistic or creative endeavor. ABOUT THE FAITH CHURCH FILM & TV DEPARTMENT The Faith Church Film & Television Department is responsible for producing and distributing video content across all the church's creative outlets. We inspire audiences to grow in their personal faith through live broadcast production, weekly television programs - airing on national and global networks; our weekend experiences, promotional ads and marketing, social media, creative event openers, and anything else related to video. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Personal: Maintain the God ordained priorities in your life putting Jesus Christ at the center of everything including your spouse, children, and the ministry Passionate about tithing at least 10% of your income to what God is doing through the vision of Faith Church Invest in and lead a Faith Church connect group Be responsible for developing & multiplying Dream Team Avoid the appearance of evil, let no hint of immorality exist and con duct life with the upmost of integrity in all situations Attend services regularly with your entire family Maintain loyalty to the vision and staff of Faith Church and always protect the unity God has given this church Believes and operates in the gifts of the Spirit Wholeheartedly believes in the empowerment of women in Pastoral leadership Fully devoted follower of Christ Person of Godly character and integrity Loves Faith Church and lives our vision and culture In alignment with “What We Believe” and “Leadership Core Values” Attend weekly Staff Meeting Personal social media posts in regards to Church activity must be aligned exclusively with Faith Church Essential Duties & Responsibilities: To work closely with the Visual & Media Arts Pastor in assuming primary responsibility for the coordination and operation of all video equipment in the live service venues of Faith Church, working closely with the other members of the Live Production team and venue pastors. Maintain working knowledge of stage production, set design and following department programs for optimal production effect. Serve as live video director understanding the expectations of the Lead Pastor & Campus Pastor as they relate to multi-campus simulcast and live video production techniques. Coordinate and/or lead set-up and teardown for events on and off campus, as scheduled by the Campus Pastor. Coordinate the upgrades, installation, maintenance, organization, and repair of all Faith Church video equipment. Recruit, train, and empower volunteers to operate the production equipment in all campus venues. Training programs should include style, team building, spiritual development, technical levels for advancement, and vision casting. Understand basic concepts including, but not limited to, electrical safety, video switchers, cabling, circuits, audio, lighting, and video equipment. Attend rehearsals and meetings, as required. Schedule early meetings with set designers and/or other departments for collaboration and planning of services and events. Understand and advocate for the Live Production team, including cross-training within the department and communicating the “why” behind the production team in the local church. Responsible for hosting, setting up, and performing video shoots on-site and off-site in coordination with the Film & TV Department. Qualifications Competencies Recruitment of volunteers. Desire and ability to build community within the team, and invest in the lives of the volunteers. Ability to train, develop and cast vision to adults, with energy and encouragement. Broad knowledge of church production. Understanding and translating department goals and information into production concepts Ability to make quick, accurate, independent decisions under pressure Exhibits good judgment, honesty, integrity, responsibility, and punctuality through the utilization of professional work standards. Ability to establish and maintain effective working relationships with supervising personnel, coworkers, and the general public. Promptly performs other related duties as assigned and required with excellence. Work Environment This job operates in a professional office environment (routinely uses standard office and video equipment) and on filming shoots. Physical Demands Office time is mostly a sedentary role (stationary at desk and working on a computer); during video shoots, services and events, must have high energy for multiple hour segments. Position Type and Expected Hours of Work The weekly schedule will include 40-45 hours per week and will be the same every week. In addition to your regular weekly hours you will be asked to participate in events that will include evening or weekend hours, as there are continual seasons where it will be necessary to exceed these minimum hours (i.e., Christmas, Easter, Strategic Planning, are just some examples and do not encompass all of the extended hours opportunities). These hours can/will fluctuate. Sunday: varies depending on campus assigned Monday: 10:00am - 6:00pm Tuesday: 10:00am - 10:00pm Wednesday: 10:00am - 6:00pm Thursday: OFF Friday: OFF Saturday: 2:00pm - 9:00pm Travel Campus to campus local travel and occasional overnight trips will be expected for this position. Required Education and Experience Level of experience: Intermediate (practical application) 5 years of video and/or production engineering; OR any equivalent combination of training and experience. Training and/or education in media production, or related field, preferred. Experience using ProPresenter setup and operation. Advanced experience with Ross Video Switchers, broadcast video systems, or similar complex equipment. Working knowledge of large-scale productions, and the implementation process of rigging and programming for live and recorded events. Experience in organization and budget management. Relevant experience to assist other areas of the Live Production department is preferred. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Are you ready to see your career take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. The Advanced Lead - SiC/GaN Power Module Packaging Engineer will focus on the design of power modules along with development, optimization, and implementation of manufacturing processes for both GaN and SiC power modules. These advanced semiconductor power modules are critical for high-efficiency high power density power electronics. In this role, you will be responsible for developing, optimizing, and implementing manufacturing processes for existing and new Gallium Nitride (GaN) and Silicon Carbide (SiC) power modules. You will participate in power module design and simulation analyses, and will work closely with mechanical designers, quality, and production teams to ensure the efficient and reliable production of high-performance GaN and SiC power modules. In addition, you will be involved in troubleshooting, process improvement, and ensuring compliance with industry standards and safety regulations. GE Aerospace, based in Pompano Beach, is a global powerhouse in the aviation industry, specializing in cutting-edge aircraft engines, systems, and avionics. The Advanced Technology Organization is responsible for driving growth through technology by researching customer needs both met and unmet, then finding solutions. Our team supports both military and commercial customers in land, sea, and air domains. Job Description Role & Responsibilities Power Module Design and Simulation * Collaborate with power module design team, provide insight on the developed module performance using simulation tools. * Collaborate with design and R&D teams to ensure manufacturability and scalability of new GaN and SiC power module designs. Process Development * Develop and optimize manufacturing processes for GaN and SiC power modules, including die attach, wire bonding, encapsulation, and testing. Process Optimization * Identify and implement process improvements to enhance yield, efficiency, and reliability of GaN and SiC power module production. * Utilize statistical process control (SPC) and other quality tools to monitor and improve process performance. Quality Control * Develop and implement quality control procedures to ensure compliance with industry standards and customer requirements. * Conduct root cause analysis and implement corrective actions to address process-related quality issues. Documentation and Reporting * Guide the team to maintain detailed process documentation, including process flow diagrams, work instructions, and standard operating procedures (SOPs). * Prepare technical reports and presentations to communicate process development and improvement activities. Training and Support * Train production staff on new processes and equipment. * Provide technical support to production teams to resolve process-related issues. Safety and Compliance * Ensure all manufacturing processes comply with safety regulations and company policies. * Participate in regular safety audits and risk assessments to identify and mitigate potential hazards. Required Qualifications * Master's degree or higher in Electrical Engineering, Materials Science, Chemical Engineering, or a related field. * Minimum of 3 years of experience in semiconductor manufacturing with a focus on power module packaging. Additional Information * GE Aerospace will not sponsor individuals for employment visas, now or in the future, for this job opening * Ability and willingness to sit onsite at our Pompano Beach, FL facility location. Desired Qualifications * PhD degree in Electrical Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, or a related field. * Experience with GaN and SiC power module manufacturing and packaging technologies. * Familiarity with industry standards and regulations related to power electronics. * Strong knowledge of semiconductor fabrication processes, materials, and equipment. * Excellent problem-solving and analytical skills. * Strong communication and interpersonal skills. * Ability to work collaboratively in a cross-functional team environment. Some of our competitive benefits package includes: * Medical, dental, and vision insurance that begins on the first day of employment * Permissive time off policy for newly hired employees * Generous 401(k) plan * Tuition Reimbursement * Life insurance and disability coverage * And more! The base pay range for this position is $112,000-150,000. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 03/01/2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Its our people that make Shoes For Crews special We hire talented people who support our values and provide training and coaching to our crew to meet their career objectives Our success comes from great team work and exceptional individual effort We strive to reward collaboration and recognize accomplishments in an environment of mutual support and respect Its much more than a great place to work its where our crew looks forward to Monday not Friday What You Will Love About US Great Company Culture Awarded one of the TOP companies to work for Competitive salary Generous Health Benefit Package some at NO cost Prepare for the future 401k with 3 match Paid vacation holidays and sick leave Hybrid and remote schedules Employee recognition platform Employee discounts Including a FREE pair of shoes Wellness program Robust onboarding program QUPID CommitteeEngagement CommitteeOur mission is to keep the workforce safe on the job with comfortable quality protective footwear solutionsreducing accidents and saving money Shoes For Crews LLC SFC is a dynamic designer manufacturer and business to business marketer of the most technologically advanced top rated slip resistant footwear for the foodservice hospitality industrial and healthcare workplaces SFC protects over 35 million workers per year in over 120000 workplaces from slip and fall accidents For over 30 years the Company has built its reputation through innovative product development technologies proprietary manufacturing and distinct niche marketing Position Summary The Business Intelligence Leader is responsible for defining delivering and maintaining data and analytics solutions to enable informed business decision making across the organization This role partners closely with business and IT leaders to design scalable data models reporting and analytics supporting business strategy operational excellence and digital transformation The Leader ensures data accuracy accessibility and usability while aligning BI standards and business needs Key Responsibilities and Accountabilities Design build deploy and maintain business intelligence and analytics solutions Develop efficient and accurate data models from disparate data sources Deliver insights through dashboards reports and analytics using tools such as Microsoft Power Platform Excel and SQL Server Reporting ServicesTransform and improve current BI reports and dashboards from Tableau to Power BIDemonstrate a deep understanding of business data concepts including the calculation and interpretation of sales revenue expenses and forecasting metrics Partner with business departments to understand data needs and translate them into actionable analytics reports and dashboards Ensure data quality consistency and governance across reporting and analytics platforms Develop and maintain technical documentation standards and best practices for BI solutions Qualifications and Skills Required Degree or skills based certifications in Information Systems Computer Science Data Analytics or related field or equivalent experience Proven experience as a Business Intelligence Engineer BI Developer or Data AnalystStrong background in data warehouse design dimensional modeling and data integration Exhibit deep business acumen with the ability to understand and interpret key financial and operational metrics such as sales revenue expenses and forecasts Experience with SQL SQL Server Reporting Services SSRS and SQL Server Integration Services SSISExperience with Microsoft Power BI and Power PlatformExperience with TableauIn depth understanding of database management systems OLAP and ETL frameworks Strong analytical and problem solving skills Ability to work effectively with cross functional teams and stakeholders This job description is not intended to be allinclusive Employee may perform other related duties without notice or a change in compensation to meet the ongoing needs of the organization Shoes For Crews is proud to be an equal opportunity employer committed to hiring a diverse and inclusive workforce Shoes For Crews provides equal employment opportunities to all employees and employment applicants without regard to unlawful considerations of sex sexual orientation gender including gender identity andor expression pregnancy race color creed national or ethnic origin citizenship status religion disability marital status age genetic information veteran status or any personal attribute or characteristic that is protected by applicable local state or federal laws

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are looking for a Manufacturing Engineer to join our team in Stuart, FL. In this role, the Manufacturing Engineer will play a key role in developing, implementing, and optimizing manufacturing processes to ensure the production of high-quality aerospace components. This position requires a strong understanding of precision machining, aerospace industry standards, and continuous improvement methodologies. Location: Stuart, FL Onsite. 2nd Shift Monday to Friday 3:15 PM to 11:45 PM Responsibilities: Design, implement, and improve manufacturing processes to meet production goals, quality standards, and cost targets. Create and optimize CNC programs for milling, turning and other machining operations. Develop tooling and fixture designs to enhance machining efficiency and precision. Provide hands-on support to machinist and operators for troubleshooting and resolving production issues. Collaborate with other MFG Engineers to ensure manufacturability and adherence to specifications. Conduct root cause analysis and implement corrective actions for quality or process-related issues. Identify opportunities for process improvement and lead initiatives to enhance productivity and reduce waste. Utilize lean manufacturing and Kaizen methodologies to drive efficiency and process control. Prepare and maintain detailed manufacturing work instructions, routings, and process documentation. Ensure compliance with aerospace industry standards, including AS9100 and NADCAP. Participate in audits and ensure adherence to safety, quality, and regulatory requirements. Manage manufacturing projects from concept to completion, ensuring timelines and budgets are met. Coordinate with cross-functional teams, including production, quality, and procurement, to achieve project goals. Evaluate and recommend new tooling, equipment, and technologies to improve machining capabilities. Required Qualifications: Bachelor's degree in manufacturing engineering 2+ years of experience in a manufacturing or aerospace machining environment Must be authorized to work in the U.S. on a full-time bases without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Proficiency in CNC machining, programming, and set up. Knowledge of GD&T and aerospace standards. Strong problem solving and analytical skills. Proficiency in CAD/CAM software- preferably Siemens NX Familiarity with ERP/MRP systems Excellent communication skills and project management skills. Working Conditions: Work is performed in a climate-controlled, well lit, and reasonably clean aerospace manufacturing environment. Noise levels are generally below 80 decibels. Most work is performed on the shop floor in a manufacturing environment with required PPE. Role involves standing, walking, climbing stairs, and moving around equipment during daily activities. May occasionally involve stooping, kneeling, crouching, crawling, or lifting items up to 25 pounds. Work requires use of hands and arms to handle and manipulate parts, tools, and equipment. Tasks include a blend of hands-on activities with parts, tools, and equipment, and technical work such as reviewing data and using computer-based systems. Frequent interaction and communication with production teams, supply chain, and customers in a dynamic environment. Extended periods of focus and attention to detail may be required when working on technical projects. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Immediately Hiring: Manufacturing Engineer Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing About Us: YouTube: Dayton-Granger, Inc. Our Website: daytongranger.com Full Time | Direct Hire | Excellent Benefits | Great Work-Life Balance Position Overview: Dayton-Granger, Inc. (DG) is a third-generation, family-owned aerospace manufacturer that has specialized in antennas, lightning protection systems, and electrostatic components for commercial and military aircraft worldwide for over 82 years. What makes DG unique is that engineering, testing, and manufacturing all happen under one roof, giving our teams direct visibility, fast collaboration, and real influence on the products we build. The Manufacturing Engineer will play a hands-on role in developing, improving, and supporting our production processes on flight-critical products. This is not a desk-only role - you'll be on the floor working closely with Engineering, Quality, Supply Chain, and Production to troubleshoot issues, refine workflows, create clear work instructions, and drive continuous improvement. If you enjoy solving problems, improving how work gets done, and seeing your ideas implemented quickly, this role offers real ownership and visibility in a collaborative, integrated manufacturing environment. Responsibilities: Design and create new process flow and work instructions with the correct process lead times, capacity analysis, and resources (machines and labor). Assist in the development and implementation of advanced production processes and tooling methodologies. Develop and execute engineering evaluation plans for experimental or analysis of new materials, new processes or new improvements. Resolve technical process problems of significant impact to performance, cost or schedule. Review, analyze and coordinate the implementation of methods and procedures to control and improve manufacturing processes. Assist in the implementation of Lean principles and technologies. Implement and maintain process FMEA (Failure mode and effect analysis) on all DG core processes in the effort to mitigate the risk of process failures and their severity. Maintain DG manufacturing best practice database and workmanship standard. Interpret company policies and maintain safety and quality standards. Perform additional tasks assigned by management Follows all DG safety procedures as per company policies and per the Facility Engineer/Safety Director Minimum Qualifications: Bachelor's Degree in Mechanical, Manufacturing, Aerospace, or related Engineering field 5+ years of experience as a Manufacturing Engineer in a production environment (not just exposure - must have owned/manipulated processes) Hands-on experience developing or improving manufacturing processes, work instructions, or tooling Practical experience supporting assembly or production floor activities, troubleshooting issues, and implementing process improvements Working knowledge of one or more manufacturing methods such as machining, composites, forming, joining, or assembly (does not need to be all) Strong analytical skills - able to collect data, identify root causes, and develop solutions Strong communication and cross-functional collaboration skills - able to work effectively with Engineering, Quality, Supply Chain, and Production teams Ability to manage multiple priorities in a fast-paced manufacturing environment English fluency (written & verbal) Preferred: Experience with FMEA, Lean, Six Sigma, or continuous improvement programs Experience in aerospace/defense or another regulated high-reliability manufacturing environment Benefits: Relocation Assistance Affordable comprehensive insurance coverage (Medical, Dental, Vision). 401(k) match with immediate vesting. Complimentary Life Insurance Coverage with Option for Supplemental Coverage. PTO and Paid Holidays. Short Term and Long Term Disability. Tuition Reimbursement. Mental Health Benefits. Complimentary basic life insurance Paid Parental Leave. Excellent work-life balance. Dynamic and collaborative work environment. Access to cutting-edge technology and resources. Length of Service/Milestone Anniversary Gifts. Team Building Activities. On-Site Gym. Why You'll Love Working Here: We are a multigenerational team with members representing a diversity of cultures, educational backgrounds, experience levels, and ideas all 'making it happen' from one location in beautiful, coastal South Florida. We are a well-established supplier providing cutting edge products in support of long-term aerospace programs, while at the same time developing new products to meet the needs of new customers, programs, and up-and-coming markets. Additionally, DG loves its employees! The average employee tenure is around 8 years. Length of service milestones are celebrated company-wide, and employees may make selections of anniversary gifts. Compliance Notice: Equal Opportunity Statement: Dayton-Granger, Inc. is an Equal Opportunity Employer. We welcome applications from all qualified individuals, including veterans and individuals with disabilities. Export Compliance Notice: This position requires access to information subject to the Export Administration Regulations (EAR) and/or the International Traffic in Arms Regulations (ITAR). Therefore, applicants must be U.S. persons as defined by these regulations. A U.S. person includes a U.S. citizen, U.S. permanent resident, or an individual who is otherwise protected under 8 U.S.C. 1324b(a)(3). Pre-Employment Requirements: Employment is contingent upon successful completion of a background check and drug screening, in compliance with company policy and applicable law.

Process Validation/Manufacturing Eng needs 1-3 years experience in a cGMP-regulated manufacturing environment or an equivalent combination of training and experience is required. Process Validation/Manufacturing Eng requires: Bachelor's degree in engineering or a related field of specialization. Industrial engineering is preferred, but not required. Process Validation Current Good Manufacturing Practices (cGMP), Food and Drug Administration (FDA), Drug Enforcement Agency (DEA), and other regulatory requirements. Speak and write fluent English with proficiency in technical writing for complex reports and regulatory documents Process Validation/Manufacturing Eng duties: Interpret specifications, standard operating procedures, and standard testing procedures Works as a member of a team to achieve all outcomes Recommends and monitors improvements in manufacturing and control systems including corrective and preventative actions (CAPA) Performs assessments/approvals of change controls related to production activities

RAS LaVrar is a rapidly expanding creditors' rights law firm servicing some of the largest financial institutions in the country. Our offices, home to hundreds of employees across seven states, work diligently to ensure our interests are in constant alignment with those of our clients. Our firm maintains a collegial work environment with opportunities for training and professional development. This is a high-volume and fast-paced practice that prides itself on efficiency and innovation. POSITION SUMMARY Process Engineers at RAS LaVrar work closely with Software Developers to streamline and standardize the firm's processes. Process Engineers are involved in the design, construction, and implementation of all aspects of the firm's processes. As such, Process Engineers are expected to develop an understanding of the firm's processes that extends beyond the programming details to include integration with non-technical elements. Responsibilities and Duties: The following responsibilities are central to the role: Craft processes Build roadmaps which include automations and applications to be developed by software developers as well as procedures to be executed by staff. Learn the firm's case management system (CMS) and construct automated process flows using the user interface therein. Develop an understanding of firm processes Build and maintain process documentation. Ascertain the purpose of firm processes in addition to their functionality. Data Engineering Build & maintain data pipelines. Construct queries using programming languages such as SQL & Python. Core Competencies & Required Skills: Candidates who succeed in this position typically: Are results-oriented. Pay close attention to detail. Display comfort and sensibility when working in a high-volume, fast-paced environment. Beat deadlines. Exhibit time-management skills/ability to work on multiple projects simultaneously. Take pride in the ability to work independently and problem solve. Demonstrate excellent verbal and written communication skills, including phone and email etiquette. Possess foundational computer knowledge and skills including familiarity with programs within the Microsoft Office Suite as well as programming languages such as SQL, Python. Educational/Experience Qualification: Bachelor's Degree or higher preferred. Individuals who excel in this role typically have academic backgrounds in operations management, engineering, and/or data science. Working Conditions: Onsite Position - Plantation, Florida Operates no tools, machines or equipment No significant lifting Benefits: Paid time off Paid holidays 401K Plan Medical, dental, vision and supplemental health insurance plans Voluntary life insurance plan Work Environment Mondays to Fridays Office Located in Plantation, FL Position: On site role Shift options to choose from 8:00 am to 5:00 pm 8:30 am to 5:30 pm 9:00 am to 6:00 pm RAS is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to race, color, age, national origin, religion, marital status, sex, sexual orientation, gender identity, gender expression, genetics, disability, protected veteran status or any other basis prohibited by law. We are committed to a diverse and inclusive workplace.

AV is seeking a dynamic and skilled Digital Signal Processing (DSP) Engineer with FPGA experience to join our growing team in Sunrise, Florida. This is an exciting opportunity to work on advanced technologies that shape the future of defense and communications systems. As a key technical contributor, you'll develop innovative DSP architectures and algorithms, integrate solutions into real-time embedded systems, and serve as a Subject-Matter Expert (SME) across multiple platforms. Primary Responsibilities Include: Design, simulate, and implement moderate to complex digital signal processing modules using tools like MATLAB, Simulink, and VHDL/Verilog for FPGA platforms. Collaborate with cross-functional teams - including hardware engineers, software developers, and system architects - to develop and integrate DSP solutions. Receive and interpret technical instruction for defined project goals and collaborate on broader system designs. Participate in meetings and communications with customers and partners to support project requirements and ensure deliverables are aligned with expectations. Apply modern DSP techniques, algorithms, and methodologies to enhance existing architectures and develop cutting-edge solutions. Contribute to complex problem-solving through hands-on development and team brainstorming. Required Qualifications: Bachelor's Degree in Electrical Engineering (or related field) and 6+ years of prior relevant experience or Master's Degree and 4+ years of prior relevant experience. Ability to obtain and maintain a US Government Security Clearance. DSP Qualifications: Proficiency in Intermediate Digital Signal Processing Algorithms. Solid understanding of DSP concepts such as filtering, FFT, and sampling theory. Proficiency in Communications theory. Some Proficiency in programming languages preferably C or C++. FPGA Qualifications: Strong interest in FPGA development and low-resource digital design techniques. Experience with RTL design in VHDL simulation tools, and synthesis flows. Familiarity with FPGA platforms (e.g., Xilinx, Microchip) and embedded system development is a plus. Preferred Technical Competencies: Software Defined Radios Digital Signal Processing Theory Signal Processing Algorithms: e.g., Rate conversion, Correlation and Filtering C, C++ Programming: Object Oriented Design DSP Algorithms using MATLAB/Simulink: Develop and pick up MATLAB models for bit exact design verification; May use SIMULINK (system generator) as an interim step. DSP and FPGA Code Optimization Modem Design (SATCOM, wireless, Cellular & SDR) Physical Layers e.g. GSM, Wi-Max, Wi-Fi, Bluetooth Real Time Debugging Signal Impairments Testing, BER Testing: Modem Qualification experience. Design Documentation Performance Verification and Validation Software/Hardware implementation collaboration System Requirements Analysis TFS, GIT Revision Control Tools Clearance Level No Clearance The salary range for this role is: AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Job Title Engineer, Industrialization Take off with Daher! Are you motivated by the idea of joining this division of excellence? Do you want to participate in its transformation and growth in Stuart, FL? Join Daher to work in a motivating environment and share our pride in designing and manufacturing exceptional products! Daher is an aircraft manufacturer and an industry and service equipment supplier. Daher asserts its leadership in three main businesses: aircraft manufacturing, aerospace equipment and systems, logistics and supply chain services. With the stability provided by its family ownership, Daher has been committed to innovation since its creation in 1863. Today, present in 13 countries, Daher is a leader in Industry 4.0, designing and developing value-added solutions for its industrial partners. Daher is a story of people with a passion for what they do and complete control over their own futures. Now it's your turn to write your own story. Daher offers a full benefit package including Medical, Dental, Vision, 401(k), Life insurance, Short- and Long-Term Disability, Paid Time Off, and Paid Holidays. Come Fly with Us! Job description Scope of Activities To carry out some or all of the following activities: Produce costings for contract bids, together with scheduling proposals (Recurring Cost (RC), Non-Recurring Cost (NRC)) Contribute to preliminary design studies (including pre-procurement and procurement) and final design studies Identify, calculate, and forecast the technical resources and directives required, draw up the corresponding specifications, and monitor their implementation with manufacturing partners Define the manufacturing file (production sequences, bills of materials, FI, programs, and STL) and contribute to the preparation of the inspection file Calculate and monitor the recurring and non-recurring costs (RC / NRC) of industrialization, and lead the action plans implemented to converge towards achieving the project targets Analyze the plans and propose options for design modifications Validate the definition files prepared by the design office Produce the test program and/or technical presentation documentation (processes, materials, bottlenecks, resources, schedule, etc.) for changes or new developments / new business, Analyze, interpret the results, and prepare test reports, complete with technical conclusions and potential impacts Analyze the technical feasibility of production transfers on customer premises (documentation, tooling status, materials, site location, time, etc.) Develop the operational manufacturing process in accordance with technical, quality-cost-lead time, HSE, and budget requirements Contribute to tooling design: define process/product constraints and requirements Contribute to solving quality problems through the use of the 8D model Optimize workstation layout (work surface, technical and/or handling resources, tooling support, etc.) to ensure that production resources and processes are appropriate Propose line balancing based on production line time analyses Ensure that (quality, cost, and lead time) commitments are met Contribute to value and FMECA product/process analyses, and suggest process or tooling improvements (production time calculation, monitoring of new technologies and methods, etc.) The activities are to be adapted for employees on work/study contracts (vocational training contracts, apprenticeship contracts, etc.) to remain consistent with their theory training. Join Daher to... Integrate a family group with a long-term vision Make a difference in a developing company Develop new skills thanks to the diversity of your missions Take part in a human and industrial adventure full of challenges Innovate and think outside the box by integrating a stimulating environment Profile and other information related to the position Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. Must be able to communicate verbally and have the ability to hear. The employee frequently is required to stand, walk, reach with hands and arms, and stoop or crouch. The employee is occasionally required to sit. The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds. Have full range of motion required to perform the job functions. Maintain steady hand-eye coordination. Reach in all directions and in potentially awkward positions. All applicants are considered for all positions without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical/mental disability, medical condition, military/veteran status, genetic information, marital status, ethnicity, alienage or any other protected classification, in accordance with applicable federal, state, and local laws. By completing an application with Daher, you are seeking to join a team of hardworking professionals dedicated to consistently delivering outstanding service to our customers and contributing to the financial success of the organization, its clients, and its employees. Equal access to programs, services, and employment is available to all qualified persons. Those applicants requiring accommodation to complete the application and/or interview process should contact an HR representative . Working hours Full time Salary 120000 Region Florida Location Stuart Experience Overall Experience Languages English Creative and entrepreneur, develop your career at the heart of the biggest industrial challenges with Daher!

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities * Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). * Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. * Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. * Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. * Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. * Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. * Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. * Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. * Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. * Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. * Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. * Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. * Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. * Adhere to all employment policies/safety policies/practices required by law/established by Company. * Wear all necessary Personal Protective Equipment as always directed by Company. * Immediately report any maintenance and/or safety issues to supervisor. * Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. * Actively participate and support the 5S process by maintaining a clean workstation and department. * Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. * 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). * 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). * Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). * Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. * Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. * Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. * Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). * Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. * Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. * Knowledge of Lean Manufacturing principles is highly desirable. * General computer skills and familiarity with Microsoft Office Suite preferred. * General mechanical ability is preferred. * Knowledge of and experience with hand tools * Adhere to essential functions of position such as attendance and timeliness. * Ability to accept and follow directions.