Industrial engineer jobs in Redwood City, CA

As a Site Reliability Engineer (Contractor), you will be a hands-on contributor, focused on supporting and improving the reliability of our AWS cloud infrastructure. You will apply core SRE principles to automate operational tasks, monitor system health, and participate in incident response. This role is execution-focused, supporting the senior team in ensuring our services are available and performant while maintaining an awareness of healthcare compliance standards. The contract extension beyond 3 months will be on the need basis. Key Responsibilities (Contract Deliverables) Cloud Infrastructure Execution & Maintenance: Assist in deploying, configuring, and maintaining highly available AWS infrastructure components. Execute Infrastructure as Code (IaC) changes using tools like Terraform to provision and configure resources. Support the operations and maintenance of existing containerized applications running on platforms like Kubernetes and Docker. AWS Networking Support: Assist the senior team in maintaining the security and efficiency of our core AWS network topologies (e.g., VPCs, subnets, routing). Perform basic configuration and maintenance of cloud load balancing (ALB/NLB) and DNS services (Route 53). Support the enforcement of network security policies and assist in routine network troubleshooting for connectivity or latency issues. Site Reliability & Automation: Identify and automate routine manual operational tasks using scripting (Python/Bash) to improve efficiency and reduce toil. Participate in blameless post-mortems and incident response efforts, focusing on documenting steps taken and assisting with root cause analysis. Contribute to the documentation and adherence of established Service Level Objectives (SLOs) and Service Level Indicators (SLIs). Monitoring & Compliance: Maintain and use existing monitoring, logging, and alerting systems (e.g., Prometheus, Grafana, ELK stack) to ensure system health. Assist in managing and verifying CI/CD pipelines to ensure safe and efficient software releases. Support compliance efforts by ensuring operational procedures align with security best practices and regulatory requirements (HIPAA, SOC 2). Required Qualifications 8+ years of hands-on experience in a DevOps, Cloud Engineering, or SRE-focused technical role. Solid practical experience with AWS cloud provider services. Hands-on experience with Linux administration and troubleshooting. Proficiency in scripting languages such as Python, Bash, etc for automation. Solid experience with Infrastructure as Code tools such as Terraform. Experience with containerization technologies such as Docker and Kubernetes. Experience with monitoring systems like Prometheus, Grafana, AWS Cloud Watch. Experience with writing SQLs on PostgreSQL DB. Working understanding of core networking principles (VPC, routing, load balancing). Basic understanding of security and compliance requirements in a regulated industry (e.g., healthcare, finance). Preferred Qualifications Relevant certifications such as AWS Certified SysOps Administrator or AWS Certified Developer. Familiarity with CI/CD tools (e.g., Jenkins, GitLab CI). Compensation: $72 - $90 per hour ID#: 2508

Job Title: Manufacturing Engineer Compensation: $100,000 -$125,000 Full employer-covered medical, dental, vision, and life insurance for employee, 401(k) ** VISA SPONSORSHIP AND RELOCATION ASSISTANCE ARE NOT AVAILABLE FOR THIS ROLE ** EXPERIENCE WITH SEMICONDUCTOR MANUFACTURING PROCESSES IS A MAJOR PLUS! What You Will Be Doing: Develop and maintain detailed manufacturing process documentation including Operation Method Sheets, test procedures, test protocols, and quality checklists for electromechanical assemblies. Design custom fixtures, shop drawings and production tools to enhance efficiency, accuracy, and repeatability in manufacturing workflows. Translate engineering designs into clear instructions and shop drawings for production teams. Lead engineering build efforts and support assembly of complex control systems and modules. Partner with teams across Sales, Quality, and Production to refine manufacturing methods and improve outcomes. Identify and resolve production and quality issues through hands-on troubleshooting and structured problem-solving. Contribute to customer projects, ensuring deadlines and quality standards are consistently met. What You Bring: A bachelor's degree in Mechanical Engineering, preferably with experience in high-tech or semiconductor manufacturing. 5-8 years of hands-on experience in machining or fabrication, particularly with metals and plastics. Strong proficiency in SolidWorks and extensive knowledge of Geometric Dimensioning and Tolerancing (GD&T). A practical, problem-solving mindset with a strong mechanical aptitude and a data-informed approach. Clear and confident communication skills, with the ability to present ideas and results to both internal stakeholders and external customers. Working knowledge of manufacturing software, Excel, and standard business analysis tools. Ability to work independently, stay organized, and contribute in a fast-paced, cross-functional team environment.

Role: Silicon Design Package Designer Work Mode: Onsite (No Remote) This role is highly specialized in semiconductor packaging design, requiring strong EDA tool proficiency and knowledge of advanced packaging technologies. Key Responsibilities & Skills: Tools & Knowledge: Mentor/Siemens and Cadence tools (especially for Package Layout Automation - PLA). Technical Expertise: Multi-layer package design experience. Understanding of substrate manufacturing Design Rules and Assembly Rules. Familiarity with SIPI (Signal Integrity & Power Integrity) Rules. Flip-chip package design concepts. Tasks: Perform point-to-point connections. Run DRC (Design Rule Checks), identify root causes, and fix issues. Execute design based on provided schematics, including component placement and constraint setup.

Silicon Design Package Engineer Contract This role is highly specialized in semiconductor packaging design, requiring strong EDA tool proficiency and knowledge of advanced packaging technologies Tools & Knowledge: Mentor/Siemens and Cadence tools (especially for Package Layout Automation - PLA). Technical Expertise: Multi-layer package design experience. Understanding of substrate manufacturing Design Rules and Assembly Rules. Familiarity with SIPI (Signal Integrity & Power Integrity) Rules. Flip-chip package design concepts

The Senior Manufacturing / Process Engineer is responsible for developing, implementing, and improving manufacturing processes for electronic assemblies in a high-mix, low-volume environment. This role supports both the U.S. and Vietnam facilities, ensuring process repeatability, cost efficiency, and product quality across SMT, Through-Hole, and system assembly operations. The senior manufacturing process engineer will report directly to the VP of operations. Goals: Build products and provide services with the highest Flexibility, Productivity, and Quality. Achieve total customer satisfaction through technical excellence and responsive engineering support. Ensure successful NPI launches through cross-functional collaboration, process validation, and data-driven feedback to design and quality teams. Objectives: 1. Support production operations in the following categories: a. Reduce downtime caused by engineering issues (programming, MPI errors, tooling, design, or line stoppage). b. Improve quality yield through root cause analysis, corrective actions, and robust process setup. c. Lead NPI and prototype builds, ensuring process readiness, documentation completeness, and manufacturability validation prior to production release. 2. Provide engineering services to meet customer needs and expectations in the following areas: a. Design for Manufacturability (DFM). b. Manufacturing Process Instruction (MPI) creation and maintenance. c. Engineering Change Order (ECO) implementation. d. Defect Reduction Team (DRT) meetings and follow-up actions. e. Failure analysis and corrective action documentation. f. Develop and validate new or modified processes, including process capability studies, DOE validation, and reflow/wave solder profile optimization g. Other engineering requests as required by customers or management. Job Description: SMT / Through-Hole / 2nd Ops / 3rd Ops Process Support Review daily SMT or build schedule to ensure process readiness. Confirm all required items are complete and available prior to production: Job package with full build documentation. Manufacturing Process Instruction (MPI) reviewed and approved. Routing definitions for data collection. Validated reflow or wave solder profiles. ECOs, deviations, or special instructions incorporated into the MPI and/or job package. All required tooling available and verified. Review pre-build DFM, document known defects, and hyperlink details in the MPI. Lead cross-functional NPI kickoff meetings to review design requirements, risk areas, and special process considerations. Document and track NPI issues and lessons learned for future builds. Coordinate with Program Managers to resolve DFM showstoppers prior to build. Analyze previous quality data, identify recurring defects, determine root causes, and implement corrective actions. Design, order, and verify all required tooling (stencils, wave solder pallets, press-fit fixtures, conformal coat fixtures, etc.). Maintain tooling logs, labeling, and readiness tracking within Omega Build Readiness. Inspect and sign off first article setups for critical processes (stencil printer, reflow oven, wave solder, etc.) using the First Article Checklist. Inspect initial boards after print and reflow for solder release, bridging, voids, and process anomalies. Document findings and sign off the First Article Report. Provide on-the-floor training for operators and technicians regarding new processes, corrective actions, or observed deficiencies. Support production by promptly responding to technical inquiries or line support issues. Exercise full authority to stop the line if repeated defects or safety concerns are observed. Quality Data Review & Root Cause Analysis Review production data in Omega Data Collection, identifying root causes and corrective actions. Review Daily, Weekly, and Customer Quality Reports to identify trends, recurring issues, or process gaps. Provide structured analysis and report findings to Quality and Production (using 8D or equivalent methodology). Document corrective actions and verify implementation during the next production run. Present findings and improvement updates in internal and customer quality meetings. Other Responsibilities: Create and submit Post-Build DFM reports to Program Managers with improvement recommendations. Implement and validate ECO changes per revision control procedures. Perform and document detailed failure analyses for internal and customer returns. Participate in process improvement projects and defect-reduction initiatives. Provide customer-driven engineering services or special support requests. Develop and deliver internal technical training for operators and peers. Support ISO 9001 and AS9100 activities, including audits, documentation, and Work Instruction updates. Qualifications: Bachelor's degree in Manufacturing, Industrial, or Mechanical Engineering (or related discipline). 8-12 years of hands-on experience in electronics manufacturing (PCBA, box-build, system integration). Deep understanding of SMT, Through-Hole, and system assembly processes. Proficient in process validation, FAI, SPC, DOE, and yield improvement. Familiarity with FactoryLogix and related MES/ERP systems. Experience leading NPI builds and developing new assembly processes from prototype through production release. Familiarity with DFM/DFT analysis tools and PCB CAD systems (e.g., Altium, Valor, Mentor). Experience with Lean, Six Sigma, and structured problem-solving tools. Strong communication and analytical skills with the ability to multitask in a fast-paced environment. U.S. Citizen or Permanent Resident (ITAR requirement). Compensation: $120-$150K Annually Benefits: Medical Dental Vision 401K + Roth 401K Vacation Paid Holidays

• Study time, motion, methods, and speed involved in maintenance, production, and other operations to establish standard production rate and improve efficiency. • Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards. • Read worker logs, product processing sheets, and specification sheets, to verify that records adhere to quality assurance specifications. • Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, and anticipated delays. • Prepare charts, graphs, and diagrams to illustrate workflow, routing, floor layouts, material handling, and machine utilization. Required Skills: • Creativity, verbal and written communication skills, analytical and problem-solving ability. • Team player and detail oriented. • Ability to make sketches, engineering drawings and common computations. • Ability to read and interpret blueprints, technical drawing, schematics and computer-generated reports. • Previous experience with computer applications and software related to engineering field, such as Computer Aided Design (CAD). Education/Experience: • Bachelor's degree in engineering required. • 5-7 years of experience required. Pay for this position is based on market location and may vary depending on job-related knowledge, skills, and experience. As a contractor you may also be eligible for health benefits such as health, dental, and vision as well as access to a 401K plan. Applicants should apply via The Mice Groups Inc. website (******************* or through this careers site posting. We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates. Privacy Policy One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you've requested. The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information. The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website. The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to *******************

Our client is a well-funded, product-focused AI startup building next-generation systems that help organizations capture, organize, and leverage their internal knowledge at scale. Their platform blends modern machine learning, intelligent data pipelines, and context-aware models to make teams more effective, faster, and dramatically more aligned. They're growing quickly and looking for engineers with strong CS fundamentals and a passion for building ML systems that operate in the real world, not just in research settings. If you're energized by early-stage ownership and solving hard problems that matter, you'll thrive here. What You'll Work On Designing and shipping ML components end-to-end: training pipelines, data ingestion, evaluation, optimization, and deployment Building models and services that learn from unstructured signals (text, docs, conversations, workflows) and surface actionable insights Transforming research concepts into scalable production systems used by enterprise customers Architecting efficient, privacy-conscious model-serving infrastructure Collaborating across engineering, product, and research to rapidly experiment and iterate Owning technical decisions in a fast-paced environment where craftsmanship and velocity both matter Who Thrives Here Engineers with strong computer science foundations (algorithms, systems, distributed computing, data structures) Builders with experience in ML frameworks (PyTorch, TensorFlow, JAX) and modern backend systems Candidates coming from top CS programs or AI-first startups where they've shipped real, user-facing ML/AI features People who enjoy working in ambiguous, zero-to-one environments and want significant ownership Curious thinkers who care about model performance, reliability, and how their work impacts real users Bonus skills (not required): experience with LLMs, embeddings, personalization models, agentic workflows, or model evaluation at scale Why This Role Is Compelling You'll build foundational AI systems at a moment where the company is scaling quickly Your work will directly shape how customers interact with and benefit from AI You'll partner closely with experienced founders and senior engineers who value autonomy and deep thinking You'll have room to experiment, influence architecture, and meaningfully impact technical direction You'll join early enough to feel the upside, but after core customer traction is already proven What's On Offer A high-ownership engineering role with scope to grow into senior or staff pathways A culture that balances speed with thoughtful engineering Mission-driven work with clear real-world utility Competitive compensation, strong equity, and flexibility in how you build If you're excited by the idea of building intelligent systems that help real teams work smarter, and you want your engineering decisions to matter, we'd love to talk.

Job Title: Sustaining Engineer Duration: 12 Months As a Sustaining Engineer, you will own post ramp qualifications, second source qualifications, and quality improvements for devices. You will partner with other electrical engineers during development, take over products as they reach maturity, and support them through end-of-life. You must be a great hands-on engineer and generalist that can wear many hats across EE, RF, Displays, Power, Audio, etc., and have strong interpersonal skills and experience working with cross-functional teams. The ideal candidate will have expertise in electrical and hardware design and have shipped consumer devices. RESPONSIBILITIES Take ownership of hardware projects from production ramp through end-of-life. Develop and qualify hardware changes, including new components and design/process changes. Participate in engineering reviews, such as schematic, layout, and DFM, with both cross-functional teams and external engineering partners. Develop system test plans, including test methodology and coverage, to validate changes and ensure product reliability. Create documentation such as Engineering Change Orders and general process documentation. Monitor data and test reports from design validation, production builds, and field returns to identify potential issues. Participate in Failure Analysis. QUALIFICATIONS BS in Electrical or Computer Systems Engineering, or equivalent experience. Direct experience in electrical hardware engineering and/or sustaining engineering. Knowledge of the technical rigor and processes required to bring a product to market at scale. Strong interpersonal and communication skills, and the ability to work with cross-functional engineering teams. Experience working with external partners, such as vendors and manufacturers. Experience reading and creating technical documentation such as datasheets, technical drawings, block diagrams, etc. Experience with common lab and test equipment such as oscilloscopes, spectrum analyzers, multimeters, etc. Experience utilizing schematic and layout tools such as Cadence PREFERRED Skills: MS in Electrical or Computer Systems Engineering. Experience within the Consumer Electronics industry. Experience with offshore manufacturing partners. Experience with electrical subsystems, such as Power/Battery, Display/Camera, Wireless/RF, Audio, etc.

This role is highly specialized in semiconductor packaging design, requiring strong EDA tool proficiency and knowledge of advanced packaging technologies. Responsibilities: Tools & Knowledge: Mentor/Siemens and Cadence tools (especially for Package Layout Automation - PLA). Technical Expertise: Multi-layer package design experience. Understanding of substrate manufacturing Design Rules and Assembly Rules. Familiarity with SIPI (Signal Integrity & Power Integrity) Rules. Flip-chip package design concepts. Tasks: Perform point-to-point connections. Run DRC (Design Rule Checks), identify root causes, and fix issues. Execute design based on provided schematics, including component placement and constraint setup

Troubleshoot new or existing product problems, involving designs, materials, or processes. Designs, develops, and implements safe and cost-effective complex equipment and methods of assembly for all phases of manufacturing. Define process and methods for high volume manufacturing, which includes operations method sheet, routing, and sequencing. Perform virtual build and create sequences of assembly. Perform root cause investigation and recommend corrective action for operational problems, such as material use variances, bottlenecks, fixture issues during build or manufacturing process. Identify opportunities to improve manufacturing processes or resolve problems and follow through resolution to reduce costs, improve product quality, and cycle time. Reviews and develops designs that improve product manufacturability and assembly. Coordinate new product builds in pilot production manufacturing partnering closely with manufacturing and product engineers. Create and release engineering drawings & bill of materials (BOM) using Engineering Change Management process. Development of handoff package to allow product transition to high volume manufacturing. Bachelor's degree in Mechanical Engineering, Production Engineering, Industrial Engineering, or related field with 5+ years of experience; or Master's degree with 3+ years' experience; or equivalent experience. Skilled troubleshooting capabilities in the areas of electro/mechanical assemblies. Solid understanding of manufacturing processes. Proficient in Design for Manufacturing and Assembly (DFMA) with approach to structured problem-solving and decision-making. Proficient in software applications such as CAD modeling, Product Lifecycle Management (PLM), or Product Data Modeling (PDM) systems. Experience in Engineering Change Management Process. Working knowledge in Operation Method Sheets (OMS), process planning, and Bill of Materials (BOM) Management. Knowledge of Semiconductor equipment, Capital Equipment industry and its manufacturing processes. Effective communication and presentation skills, both written and verbal, in English. Statistical analysis skills including statistical process control and data analysis used in production setting. Knowledge in Design Failure Mode and Effect Analysis (DFMEA). Proven stakeholder management skills, with ability to influence both internal and external stakeholders or customers in technical matters.

Do you want to shape the future of technology and multimedia? Apple's Multimedia Engineering team is looking for a video standards engineer who will represent the voice of Apple Multimedia in standards bodies around the world. In this role, you will join a small team that is responsible for Apple's engagement with several standards developing organizations including Alliance for Open Media (AOM), ITU, MPEG, 3GPP, and others. You will investigate and develop new media technologies collaborate with other teams within Apple in such development and then engage with these organizations for their standardization. As a video standards engineer, you will be a member of a team that represents Apple in the international standards' community. In this role you will be providing a clear position on our analysis of ongoing standards, refining and commenting on work in progress, proposing and driving to completion Apples initiatives and in general, steering the work to develop the field in line with Apple's vision and values. You may also represent Apple at standardization calls and meeting, integrating the feedback of the Apple community on the ongoing work and representing that at meetings. You will engage with various standards bodies, including the Alliance for Open Media, MPEG, 3GPP, ITU etc. and you will be involved in the development of new 2D and 3D multimedia standards. This position requires travel. Awareness of the interaction of intellectual property and standards. Curiosity and interest in new technologies and ideas especially pertaining to multimedia. Excellent judgement and integrity with the ability to make timely and sound decisions. Self-motivation and creative and critical thinking capabilities. Strong Collaboration Skills The ability to prioritize, drive and supervise initiatives. M.S. or higher in EE/CE/CS with a focus in software engineering and or signal processing Knowledgeable in video compression and the multimedia field in general, including 3D visual information coding. Good knowledge of the development of international standards, especially those pertaining to video/multimedia compression. Experienced in developing sophisticated video compression technologies such as MPEG-4 AVC, HEVC, VVC, or AOMedia's AV1 adn AV2 helpful. Track record of effective participation. Able to develop, analyze, propose and refine new algorithms and techniques; help develop Apples intellectual property position with inventions and filings. Experienced in key multimedia specifications from AOM, ISO, ITU, SMPTE, etc. Familiar with software development tools including Xcode, Git etc. Proficient in practical software development and able to contribute to large codebases e.g. of reference software (C, C++). Excellent writing, speaking, presentation and other interpersonal skills.

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA. We are seeking a highly motivated and experienced Supplier Industrialization Engineer (SIE) with a deep specialization in Printed Circuit Board Assemblies (PCBAs) and Top Level Assemblies (TLAs) . In this critical role, you will be the technical expert responsible for ensuring the quality, reliability, and manufacturability of our PCBA components from our global supplier base. You will bridge the gap between design engineering and manufacturing, driving continuous improvement and scaling our production capabilities to meet our ambitious goals. Responsibilities Supplier Development & Qualification: Conduct comprehensive audits and assessments of existing and potential PCBA suppliers (domestic and international) to evaluate their manufacturing infrastructure, process controls, automation levels, and quality systems. Collaborate within Supply Chain and Engineering teams to define rigorous supplier selection criteria and execute sourcing strategies. Lead supplier onboarding, development, and risk mitigation strategies to ensure long-term quality, cost optimization, and supply chain resilience. Design for Manufacturability (DFM) & Assembly (DFA): Actively participate in early-stage product development, providing critical DFM/DFA feedback on PCBA designs to engineering teams. Work closely with design engineers to optimize PCBA layouts for manufacturability, integrating supplier-specific feedback into part and assembly designs (e.g., panelization, stencil design, soldering, AOI, ICT). Ensure manufacturing best practices are embedded early in the design process. Process Optimization & Manufacturing Readiness: Lead the development and validation of new SMT (Surface Mount Technology) processes and technologies (e.g., fine-pitch, micro-BGA, PoP, 0201/01005 components) at supplier sites. Develop and implement Process Flow Diagrams (PFDs) to identify bottlenecks, improve throughput, and optimize automation. Drive prototyping and pilot builds to evaluate and refine PCBA manufacturing processes prior to volume ramp-up. Implement End-of-Line (EOL) test strategies and in-line process validation to ensure stable and repeatable quality. Identify and implement automation and process controls for scalable, cost-efficient PCBA manufacturing. Lead trials and qualifications for new solder pastes, fluxes, nozzles, and reflow profiles. Quality & Compliance: Collaborate with the Quality team to establish robust vendor certification processes, ensuring high-performance PCBAs. Implement quality controls at suppliers, pushing defect prevention upstream through root cause analysis and corrective actions (SCARs - Supplier Corrective Action Requests). Deploy and monitor Statistical Process Control (SPC) methodologies, ensuring data-driven decision-making and process stability. Develop and implement Process Failure Mode and Effects Analysis (pFMEA) to proactively identify and mitigate risks in PCBA manufacturing. Lead Design of Experiments (DOE) and Gage R&R studies to validate process robustness, test equipment reliability, and measurement system accuracy. Own and be responsible for field quality failures, driving suppliers to implement sustainable corrective actions and lessons learned. Supplier Management & Performance: Determine and manage production line layout capacity by balancing cycle time and driving process flow changes at supplier sites. Drive continuous improvement in supplier scalability, cost, and quality performance, minimizing inspections and improving first-pass yield. Act as the critical-to-quality (CTQ) leadership during New Product Introductions (NPIs) for suppliers. Facilitate clear communication of technical requirements between suppliers and internal teams (Purchasing, Quality, Design). Utilize data analytics tools to analyze process trends, identify quality issues, and drive improvements. Partner with suppliers to implement robust quality systems and drive operational excellence. Requirements Bachelor's degree in Electrical Engineering, Industrial Engineering, Mechanical Engineering, or a related technical field. 7+ years of experience progressive experience in supplier industrialization, manufacturing engineering, or process engineering, with a strong focus on Printed Circuit Board Assembly (PCBA) and Top Level Assembly (TLA). Deep understanding of PCBA manufacturing processes, including SMT, Through-Hole Technology (THT), reflow, conformal coating, underfill, washing, press fit, pin insertion, and depanelization. Proficiency in Design for Manufacturing (DFM) and Design for Assembly (DFA) principles. Strong knowledge and practical experience with quality methodologies and tools (e.g., Root Cause Corrective Action (RCCA), Fishbone, Process Mapping, 5S, SPC, pFMEA, DOE, Gage R&R). Solid experience with New Product Introductions (NPIs) and project management in a manufacturing environment. Familiarity with industry standards such as IPC-A-600, IPC-A-610, J-STD-001. Experience with CAD software and PCBA layout tools. Excellent analytical and problem-solving skills, with the ability to interpret complex data and drive actionable insights. Strong communication, negotiation, and interpersonal skills to effectively collaborate with suppliers and internal cross-functional teams. Ability to travel domestically and internationally up to 30%, sometimes with short notice, to engage with manufacturing partners. Self-motivated, hands-on, and adaptable to a fast-paced, dynamic environment. Bonus Qualifications: Master's degree in a relevant engineering field. Certifications such as ASQ CQE, CQM, CRE, CQA. Knowledge of Lean Manufacturing and Six Sigma methodologies (Green Belt or Black Belt certification a plus). Experience in the [mention relevant industries, e.g., automotive, aerospace, consumer electronics, medical device] industry. The US base salary range for this full-time position is between $140,000 - $220,000 annually. The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Salary range: $90K-120K THE SYNNEX CULTURE SYNNEX creates additional value for all of our partners at all transaction points. For the company to succeed, each SYNNEX associate is focused on delivering the finest products, services, and solutions in the industry. SYNNEX values and rewards loyalty, teamwork, integrity, and industry. We encourage team collaboration and the spirit of entrepreneurship. Our associates are our greatest asset, and we are dedicated to providing our team members with the opportunity to realize personal growth and professional success. Get in S•Y•N•C• with SYNNEX Start Your New Career as a……..Quality Engineer THE RIGHT FIT SYNNEX Corporation is looking for a detail-oriented, hands-on, results-driven individual with proven communication skills and a strong work ethic to work in a challenging, fast-paced, energetic environment with responsibilities that include managing all aspects of the quality control production process, fall-out, audits and ISO; ensuring that division and departmental practices comply with company requirements; achieve stated objectives and meet current ISO standards. PRINCIPAL DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS) Main point of contact for process quality issues, including any inspection activities, priorities and escalations. Collaborate with production teams to address quality issues and implement corrective actions. Collaborate with PE/TE/PM to ensure alignment on quality objectives and priorities. Support regular inspections and audits of manufacturing processes and products to identify defects or deviations from quality standards. Provide a guidance of the acceptance criteria on the cosmetic issues to QC and MFG team. Coordinate and resolve Stop line, Quarantine and QRQC (Quick Response Quality Control) issues. Refocusing QA resources from data-gathering/reporting to using audit for driving process improvement opportunities. Direct QA resources in performing primarily in-line audits to auditing primary upstream processes. Establish and build closer links between site QA teams and Engineering / Manufacturing teams. Work with internal Production, Engineering, Shipping/Receiving, Warehouse, Program Managers and Procurement to meet quality standards. Develop proactive solutions and implement Quality department strategies across the organization. Customer-facing site-based QA representative who can effectively present and communicate to internal customers and other areas. Direct site QA teams to maintain consistent standards & metrics & to share/implement best practices across products. Review and approve Product and Processes Corrective and Prevention Action Plans (8Ds) and perform additional assessment and analysis as assigned. Perform failure analyses, root cause analysis and corrective action follow-up. Assess and evaluate all reliability testing, equipment service and calibration and the verification process. Execute internal audits on QMS, EMS, ISO 9001 and ISO 14001 standards. Coordinate UL (Underwriter's Laboratory) and other regulatory factory audits. ESSENTIAL CRITERIA BS degree in Computer Science, Electrical, Mechanical or Industrial Engineering or relevant discipline plus 3 years of experience including a combination of 2+ years in contract manufacturing, 3+ years in quality control and 3+ years in a leadership position or equivalent combination of experience. Prior manufacturing engineering and quality experience. Proven understanding of mechanical drawing and/or tools. Experience with server/computer, build or repair processes. Knowledge of key customer processes (i.e. Microsoft, etc.) Demonstrated background in interfacing with key customers within the high tech industry and experience working across multiple sites sharing best practices & implementing process improvements. Working knowledge of MS Office programs; Word, Excel and PowerPoint. Hands on experience with quality system training including understanding of SPC (Statistics Process Control) principles and tools. Established ability prioritizing and managing multiple projects to meet strict deadlines. Flexibility to work in a fast-paced, high volume, and diverse environment across functions to produce expected results. Able to work as business needs require which may include long days, occasional evenings and weekends, and travel to all manufacturing and warehouse locations, for business meetings or training. WHAT SYNNEX OFFERS YOU SYNNEX Corporation (SNX) is committed to investing in our associates. They are our greatest asset, and we are dedicated to providing our team members with the opportunity to realize professional and personal growth. If you share our mission, our strong work ethic, and our values of integrity, continuous learning, quality of work, commitment, teamwork, execution and results, respect for the individual, and taking manageable risks, then SYNNEX may be the place for you. Competitive Compensation Profit Sharing Employee Stock Purchase Plan Paid Vacation Days Paid Holidays Paid Sick Days Direct Deposit Tuition Reimbursement Medical and Prescription Insurance Dental Insurance Vision Care Life & Accident Insurance Development Scholarship Program Flexible Spending Accounts (FSA) Short- & Long-Term Disability Bereavement and Jury Duty Leaves Casual Dress Code Employee Assistance Program Live Well Work Well Program Training Opportunities Pet Insurance “SYNNEX Corporation is an Equal Employment Opportunity employer M/F/D/V and is committed to the Quality Policy.” Note: The preceding job description has been designed to indicate the general nature and level of work performed by employees with this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Top of Form Top of Form @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

ABOUT THE ROLE As a Manufacturing Engineer, you'll design, validate, and refine advanced manufacturing techniques. You'll team up with others to develop state-of-the-art tooling and automation solutions that scale with next-generation product lines and delight our customers. WHAT YOU WILL DO Lead the development and continuous improvement of MEMS pressure sensor assembly processes to enhance performance, quality, and manufacturability. Design, develop, and validate MEMS assembly processes for both production and prototype builds, including techniques such as wire bonding, die attach, overmolding, and encapsulation, with optimal materials selection. Drive product yield improvements and production efficiency through the application of Lean Manufacturing and Six Sigma principles. Design, develop, and implement advanced tooling, fixtures, and equipment solutions to support scalable and reliable manufacturing. Collaborate within a cross-functional Engineering team to conceptualize and implement flexible assembly and test platforms for future product lines. Conduct hands-on work in a Class 1000 cleanroom environment (approximately 10% of total work time) Support global operations with occasional domestic and international travel as required. WHAT YOU BRING ALONG A Bachelor's degree in Manufacturing Engineering, Mechanical or Electrical Engineering or a related discipline Minimum three years of hands-on engineering experience in a high-volume manufacturing environment, ideally within the semiconductor, MEMS or sensor industry. Proven expertise in IC or MEMS packaging processes, including wire bonding, die attach, encapsulation, materials selection, and operation of micro-packaging equipment. Strong working knowledge of core quality and process tools such as Design of Experiments (DOE), Failure Mode & Effects Analysis (FMEA), Control Plans, and Statistical Process Control (SPC). Demonstrated success in developing or supporting products in regulated sectors such as automotive or medical devices. Ability to perform effectively in a cleanroom environment while adhering to all required gowning and safety protocols. Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint, Project, and Access. Apply expertise in workstation layout, design optimization, and ergonomic principles to enhance manufacturing efficiency and operator performance. Demonstrate strong written and verbal communication skills, with the ability to produce clear technical documentation and collaborate effectively with internal teams and customers. Exhibit a proactive, self-motivated approach with a proven ability to work across multiple projects, meet deadlines, and contribute effectively within cross-functional teams. WHERE YOU WILL WORK On-site in Fremont, CA WHAT WE OFFER Competitive salary and benefits package and 401(k) with company match Health and wellness programs Professional onboarding and training opportunities Inclusive and collaborative work environment

PURPOSE: Responsible for continuous improvement activities under instructions to support manufacturing process, technique, and methodology. As improvement in manufacturing systems by using statistical analysis and other analytical tools to maximize production efficiency. Support the organizational goals in achieving total customer satisfaction. PRINCIPLE ACCOUNTABILITIES / DUTIES: * Creates program to support the production report * Collects schedule build requirement and expects output to achieve schedule plan * Evaluates and indicates how to achieve the performance * Calculates head count and overtime requirement * Cooperates with Production manager Industrial Engineer to improve efficiency and balance head count to properly for output achievement * Set target by cooperating with engineer and production supervisor to follow-up * Defines problem and establishes the corrective and preventive action follows up and report. * Knows your customer's expectations and drive action to meet them * Perform other duties as properly assigned by supervisor/leader * Work with customer DFM engineer to define manufacturing process flow and prepare necessary tooling for PCBA * Works closely with the site to coordinate supply chain procurement activities in support of engineering builds * Publishes and reviews DFX reports with key customer representatives, including all issues found and resolved during developments, as well as yield reports and analysis. * Develops Build Plans with the project team, driving and coordinating the subsequent builds, lead times and shipments with the site. * Makes intelligent decisions to support quick turn around on sample and engineering builds. PREVIOUS EXPERIENCE REQUIRED: * Excellence math, verbal, computer, and problem solving skills required * Must be able to read and interpret schematic diagrams, technical manuals and related information * Familiar with Surface-Mount Technology (SMT) electronic components and SMT assembly process. * Familiar with SMT and PTH process especially * Familiar with solder printer, SPI, AOI, AXI, wave soldering and BGA rework machines * Familiar with soldering materials, soldering process, temperature profiling and process debug for soldering issues on PCBA. * Familiar with IPC and J-STD which related with PCBA, soldering and test. * Familiar with statistical methods (SPC, GRR, DOE) for problem solving and process capability evaluation. * Experience of writing the work instruction. Preferred Education: BS/MS degree for Mechanical, Electrical, Industrial Engineering or equivalent Rate: $69k-$110k/annually; based on knowledge, skills, experience, etc FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic information, veteran status, or any other characteristic protected by law.

Job Description Therm-x of California is the leading manufacture for Advanced Temperature and Control Systems for Hi-Technology industries. We have been in business for over 30 years and have a diverse customer base. We offer competitive pay, and a comprehensive benefits package. The Manufacturing Engineer I will have a multi-functional roll to support development, design, and implementation of Therm-x's vertically integrated heater factories. Duties Include but not limited to; Mechanical design for tooling and automation Torch and Induction braze qualifications per applicable codes Supports manufacturing process documentation, implementation, and continuous improvement Supports lean manufacturing process improvement projects Support design of custom packaging. Support manufacturing and coordination, execution and operations process development Provides documentation and makes technical presentations as required Understands 6 sigma principles and has experience utilizing statistical analysis software (JMP, MiniTab) Develop efficient lean manufacturing processes with an emphasis on quality and efficiency. Evaluate production and NPI parts with DFM in mind by applying knowledge of product design, fabrication, assembly, tooling, and materials, soliciting observations from operators Specify tooling or equipment required to manufacture product per customer requirements within budgeted cost and lead time Provide technical assistance on projects supporting the manufacturing divisions. Prepares product and process reports by collecting, analyzing, and summarizing information and trends Interface with customers, suppliers, subcontractors, and contract manufacturers as needed Spend time observing and gathering feedback how current processes are working and report back to management findings. Desired Skills Knowledge of Microsoft Office (Word, Excel, Power Point, Visio, Project) Expert skills with 3D design packages such as SolidWorks, Autodesk Inventor Knowledge of torch and induction brazing with experience qualifying braze joints per applicable codes such as AWS B1.2. Strong skills in GD&T per ANSI Y14.5 Read and interpret assembly drawings, blueprints and electrical schematics Read bill of materials and identify all components specified Self-motivated, requiring minimum supervision Over 2 years of experience in low volume high mix manufacturing environment Education and/or Experience: Bachelor of Science in Materials, Mechanical, Aerospace or Joining Engineering with 2+ years of experience. BS Industrial, Manufacturing, or equivalent Physical Demands: While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must occasionally lift and/or move up to 30 pounds. Work Environment: high noise level associated with manufacturing facility

As a Site Reliability Engineer (Contractor), you will be a hands-on contributor, focused on supporting and improving the reliability of our AWS cloud infrastructure. You will apply core SRE principles to automate operational tasks, monitor system health, and participate in incident response. This role is execution-focused, supporting the senior team in ensuring our services are available and performant while maintaining an awareness of healthcare compliance standards. The contract extension beyond 3 months will be on the need basis. Key Responsibilities (Contract Deliverables) Cloud Infrastructure Execution & Maintenance: Assist in deploying, configuring, and maintaining highly available AWS infrastructure components. Execute Infrastructure as Code (IaC) changes using tools like Terraform to provision and configure resources. Support the operations and maintenance of existing containerized applications running on platforms like Kubernetes and Docker. AWS Networking Support: Assist the senior team in maintaining the security and efficiency of our core AWS network topologies (e.g., VPCs, subnets, routing). Perform basic configuration and maintenance of cloud load balancing (ALB/NLB) and DNS services (Route 53). Support the enforcement of network security policies and assist in routine network troubleshooting for connectivity or latency issues. Site Reliability & Automation: Identify and automate routine manual operational tasks using scripting (Python/Bash) to improve efficiency and reduce toil. Participate in blameless post-mortems and incident response efforts, focusing on documenting steps taken and assisting with root cause analysis. Contribute to the documentation and adherence of established Service Level Objectives (SLOs) and Service Level Indicators (SLIs). Monitoring & Compliance: Maintain and use existing monitoring, logging, and alerting systems (e.g., Prometheus, Grafana, ELK stack) to ensure system health. Assist in managing and verifying CI/CD pipelines to ensure safe and efficient software releases. Support compliance efforts by ensuring operational procedures align with security best practices and regulatory requirements (HIPAA, SOC 2). Required Qualifications 8+ years of hands-on experience in a DevOps, Cloud Engineering, or SRE-focused technical role. Solid practical experience with AWS cloud provider services. Hands-on experience with Linux administration and troubleshooting. Proficiency in scripting languages such as Python, Bash, etc for automation. Solid experience with Infrastructure as Code tools such as Terraform. Experience with containerization technologies such as Docker and Kubernetes. Experience with monitoring systems like Prometheus, Grafana, AWS Cloud Watch. Experience with writing SQLs on PostgreSQL DB. Working understanding of core networking principles (VPC, routing, load balancing). Basic understanding of security and compliance requirements in a regulated industry (e.g., healthcare, finance). Preferred Qualifications Relevant certifications such as AWS Certified SysOps Administrator or AWS Certified Developer. Familiarity with CI/CD tools (e.g., Jenkins, GitLab CI). Compensation: $72 - $90 per hour ID#: 2508

Our client is a well-funded, product-focused AI startup building next-generation systems that help organizations capture, organize, and leverage their internal knowledge at scale. Their platform blends modern machine learning, intelligent data pipelines, and context-aware models to make teams more effective, faster, and dramatically more aligned. They're growing quickly and looking for engineers with strong CS fundamentals and a passion for building ML systems that operate in the real world, not just in research settings. If you're energized by early-stage ownership and solving hard problems that matter, you'll thrive here. What You'll Work On Designing and shipping ML components end-to-end: training pipelines, data ingestion, evaluation, optimization, and deployment Building models and services that learn from unstructured signals (text, docs, conversations, workflows) and surface actionable insights Transforming research concepts into scalable production systems used by enterprise customers Architecting efficient, privacy-conscious model-serving infrastructure Collaborating across engineering, product, and research to rapidly experiment and iterate Owning technical decisions in a fast-paced environment where craftsmanship and velocity both matter Who Thrives Here Engineers with strong computer science foundations (algorithms, systems, distributed computing, data structures) Builders with experience in ML frameworks (PyTorch, TensorFlow, JAX) and modern backend systems Candidates coming from top CS programs or AI-first startups where they've shipped real, user-facing ML/AI features People who enjoy working in ambiguous, zero-to-one environments and want significant ownership Curious thinkers who care about model performance, reliability, and how their work impacts real users Bonus skills (not required): experience with LLMs, embeddings, personalization models, agentic workflows, or model evaluation at scale Why This Role Is Compelling You'll build foundational AI systems at a moment where the company is scaling quickly Your work will directly shape how customers interact with and benefit from AI You'll partner closely with experienced founders and senior engineers who value autonomy and deep thinking You'll have room to experiment, influence architecture, and meaningfully impact technical direction You'll join early enough to feel the upside, but after core customer traction is already proven What's On Offer A high-ownership engineering role with scope to grow into senior or staff pathways A culture that balances speed with thoughtful engineering Mission-driven work with clear real-world utility Competitive compensation, strong equity, and flexibility in how you build If you're excited by the idea of building intelligent systems that help real teams work smarter, and you want your engineering decisions to matter, we'd love to talk.

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Day Shift 100% Onsite in Fremont Salary range: $85 - $100K Responsibilities: Investigate and resolve operational problems, including equipment issues, material variances, and production bottlenecks, to maintain smooth operations. Assess and set up production infrastructure and production process flow setup Manage production documentation management to include: WO BOM Validation Shop Floor Control System Routing Production Flow Diagram Pack Out Instructions Accountable for Change Order Management to include: Assess, document, and communicate all production floor and/or customer-driven changes Coordinate ECO/ECN/MCO phase-in/cut-in process Control ECN/ECO Documentation Control Manufacturing Notice, Process Alert Documentation Create and update all applicable work instructions Responsible for production training in the areas of MPI. Provide project detail status reports to internal core team managers and, when applicable, our customers Calculate Task time and workforce requirements Perform continuous improvement using Lean program Perform time/motion study and capacity analysis for manufacturing processes. Collaborate with production teams to address Process/quality issues and implement corrective actions. Collaborate with QE/TE/PM to ensure alignment on quality objectives and priorities. Qualifications : BS Degree with 3 years of Manufacturing Engineer / Process Engineering experience In-depth understanding of manufacturing processes Understanding of standard product development processes Knowledge of DFx Understanding of PFMEA, Six Sigma processes highly desirable Proficient in MS/Office (Word, Excel, etc.) @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.