Top Industrial Maintenance Mechanic Skills

Below we've compiled a list of the most important skills for an Industrial Maintenance Mechanic. We ranked the top skills based on the percentage of Industrial Maintenance Mechanic resumes they appeared on. For example, 11.4% of Industrial Maintenance Mechanic resumes contained Production Machines as a skill. Let's find out what skills an Industrial Maintenance Mechanic actually needs in order to be successful in the workplace.

The six most common skills found on Industrial Maintenance Mechanic resumes in 2020. Read below to see the full list.

1. Production Machines

high Demand
Here's how Production Machines is used in Industrial Maintenance Mechanic jobs:
  • Check and record building emissions,check to make sure production machines were operating correctly.
  • Assisted in recommending improvements for maintenance and assembly personnel on newly build automation production machines, prior to receiving from manufacturer.
  • Ensured operation of machinery by completing preventative maintenance requirements on motors, pneumatic and electrical operating systems, and production machines.
  • Perform preventative and predictive maintenance to maintain industrial electrical/mechanical machinery, conveyor systems, and production machines and equipment.
  • Provided preventive maintenance, problem solving and repair of facilities machinery and mechanical equipment including all production machines.
  • Performed mechanical service including electrical, pneumatic and hydraulic troubleshooting and repaired of packaging and production machines.

Show More

2. Conveyor Systems

high Demand
Here's how Conveyor Systems is used in Industrial Maintenance Mechanic jobs:
  • Use of different conveyor systems, slicing machinery, and PLC's (programmable logic controllers).
  • Ensured the routine maintenance and operation of conveyor systems was carried out.
  • Learn to adjust photo eyes and limit switches on conveyor systems.
  • Service Industrial 480 3 phase Presses, packaging equipment, conveyor systems
  • Preformed preventative and reactive maintenance on machines and conveyor systems.
  • Serviced a multitude of conveyor systems and waist systems.
  • Replace sprockets & chains on conveyor systems.
  • Service and maintained conveyor systems.
  • Experience: Preventive Maintenance, service and repair, troubleshooting, control Pm/Mo/Reac over 60 conveyor systems.
  • Work electrical controls single and three phase; dc control units and conveyor systems.
  • flour pumps, liquid pumps and many types of conveyor systems.

Show More

3. Electric Motors

high Demand
Here's how Electric Motors is used in Industrial Maintenance Mechanic jobs:
  • Diagnose vibration and replacement of up to 300 HP electric motors.
  • Fixed and replaced electric motors.
  • Repaired and maintained electric motors.
  • Test incoming electric motors before disassembling for repair.
  • Rebuild electric motors and gear reduction drives.
  • Maintain electrical equipment including electric motors, control boxes, welders and P.L.C.'s.

Show More

4. Preventive Maintenance Requirements

high Demand
Here's how Preventive Maintenance Requirements is used in Industrial Maintenance Mechanic jobs:
  • Completed preventive maintenance requirements on Hilo's Personal carriers, Man lifts, and motors.

Show More

5. Hand Tools

high Demand
Here's how Hand Tools is used in Industrial Maintenance Mechanic jobs:
  • Realigned and adjusted components such as motors, gearboxes, clutches, and brakes and using hand tools and following diagrams.
  • Examined protective guards, loose bolts and specified safety devices on trucks, and made adjustments with hand tools.
  • Overhaul gas and diesel engines, using mechanic's hand tools, welding equipment, standard charts and hoists.
  • Dismantled machines and equipment to gain access to problem areas, using hand tools and power tools.
  • Fabricated repair machine parts, piping, and duct work with both hand tools and specialized machinery.
  • Skilled in identifying the proper power and hand tools in the safest possible manner and various equipment.
  • Realigned and adjusted components, such as spindles and clutches, with hand tools.
  • Skilled using electronic equipment, power tools, hand tools, precision measuring equipment.
  • Use of various hand tools, power tools, diagnostic and testing equipment.
  • Manufactured needed parts using machine shop equipment and hand tools.
  • Utilize standard shop hand tools, measuring devices and equipment.
  • Used all types of hand tools and equipment.
  • Used hand tools, testing devices, chain falls.
  • Serviced automatic oil burners in furnaces in commercial establishments, using hand tools and pipe- threading tools.
  • Used hand tools and power tools, welders, torch cutting equipment, lift trucks.andcranes

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. PLC

high Demand
Here's how PLC is used in Industrial Maintenance Mechanic jobs:
  • Required to fabricate and weld, pipe fitting, plumbing, PLC systems, electrical skills and computer skills.
  • Worked with various MCC panels and PLC cabinets troubleshooting and replacing electrical components.
  • Used PLC's to assist in troubleshooting problems in plant equipment.
  • Possess an understanding of both Allen-Bradley and Hitachi PLC systems.
  • Convey belts which operated on PLC's and/or frequency drives.
  • Understand theory of operation, PLC and troubleshooting processes.
  • Experience with PLC and automated equipment and applications.
  • Repaired pneumatic, electrical components and PLC's.
  • Trouble shoot Program logic Controllers (PLC) T.S.
  • Operate, repair, and adjust PLC's.
  • Skilled: 230,277,480-3 phase, PLC Exp.
  • Worked with electric, hydraulics, pneumatics, PLC'S, fiber optics, welding, fabrication and computers.
  • Recognized for extensive knowledge in electronics, pneumatics, instrumentation, PLC, and fabrication.
  • Used other kinds of machines: Cry-o-Vac, Multivac, PLC systems.
  • Experienced in electronics, PLC installation and programming, pneumatics and hydraulics.
  • work on PLC and automatic electrical controls.
  • Experienced in Allen Bradley RSlogic, Omiron PLC controllers, variable speed drives, 3 phase motors, 480-240-120 voltage.
  • Repaired forklifts, including hydraulic repairs to pumps and cylinders Tested PLC's Electrical troubleshooting and rewiring
  • Maintain production and facilities equipment, mechanicial and electricial,PLC, automation.
  • Worked with Yaskawa, Mitsubishi,Omron, and Siemens PLC Software.

Show More

7. Hydraulic Systems

high Demand
Here's how Hydraulic Systems is used in Industrial Maintenance Mechanic jobs:
  • Rebuild hydraulic cylinders and hydraulic systems in an industrial environment.
  • Serviced and maintained pneumatic and hydraulic systems.
  • Performed repairs on equipment hydraulic systems.
  • Fabricate special lifting and towing attachments, hydraulic systems, shields, and other devices according to blueprints or schematic drawings.
  • Install and repair industrial machinery including PLC's, conveyors, AC/DC drives, pneumatic and hydraulic systems.
  • Diagnose and repair pneumatic and hydraulic systems, packaging and labeling equipment.
  • Checked fuel hydraulic systems or fluids for contamination.
  • Serviced conveyer machines; changed drive belts, lubricated mechanical systems and serviced hydraulic systems.

Show More

8. Mechanical Equipment

high Demand
Here's how Mechanical Equipment is used in Industrial Maintenance Mechanic jobs:
  • Job Duties: Maintains production and quality by ensuring operation of machinery and mechanical equipment.
  • Install, maintain, troubleshoot and repair stationary industrial machinery and mechanical equipment.
  • Managed planning and implementing preventive maintenance programs for the building and mechanical equipment.
  • Maintain production machinery and mechanical equipment.
  • Planed and performed various skilled mechanical duties for installation, troubles shooting, and repair of mechanical equipment.
  • Responded to calls after hours and on weekends to repair mechanical equipment failures.
  • Developed standard operating procedures (SOP's) for maintaining mechanical equipment.
  • Inspected, analyzed, and repaired various pneumatic, hydraulic, mechanical, and electromechanical equipment.
  • Operate Fork, Scissor and Snork Lifts * Maintain production machinery and mechanical equipment.

Show More

9. Electrical Systems

high Demand
Here's how Electrical Systems is used in Industrial Maintenance Mechanic jobs:
  • Disassemble and reassemble machines as needed, unhook and hook up all electrical systems.
  • Fixed machinery that used air, water, and electrical systems.
  • Repaired air tools, plumbing and electrical systems.
  • Experience with hydraulics, pneumatics and electrical systems & the ability to operate shop equipment.
  • Trained and experience with hydraulic and electrical systems, including all controls, hydraulic actuators, navigational system and stabilization systems.
  • Repaired and serviced air conditioning, heating, engine-cooling, and electrical systems of heavy-duty mobile equipment and refrigerated trailers.

Show More

10. MIG

high Demand
Here's how MIG is used in Industrial Maintenance Mechanic jobs:
  • Experience with primarily stick welding and some MIG welding.
  • Light fabrication and MIG welding skills.
  • Torch cutting, MIG/stick welding.
  • Band saws, Grinders, Cut off saws, MIG, TIG and STICK welding processes.
  • Performed MIG, TIG and Stick welding.
  • Weld and fabricate all parts needed for normal operation using MIG, MIG Flux cored, TIG and ARKwelding.
  • General fabrication including Mig and Arc welding stainless production equipment, special projects, and general pipe repair.
  • Welded parts with arc, mig and gas welding equipment.
  • Welded with Mig welder, fabricated with wood and steel.
  • Welded steel with mig and stick welders.
  • Repair with stick and mig welding.
  • Experience in using Mig, Tig, and stick welders, cutting torches as well as power tools and fabricating.
  • Use of mig, tig, and arc welding equipment, ability to read and interpret blueprints.
  • Performed Mig, Tig, Arc welding and utilized Oxygen/Acetylene and Plasma for brazing and cutting functions.
  • Air compressors, cooling towers, Mig, Tig and Stick welding, plasma cutters.
  • Repaired Machinery, Welding Mig, Stick, and Tig, Machinist.
  • Perform mig, tig, stick welding and fabrication when necessary.
  • Experience with Metal Fabrication, Lexan Fabrication, and Mig/Arc Welding.
  • Stick, Mig and Tig Welder (no certification).
  • Distinguished Tig Welder, Stick Welder, Mig Welder,*Maintain, Troubleshoot, & P.M.

Show More

11. Air Compressors

high Demand
Here's how Air Compressors is used in Industrial Maintenance Mechanic jobs:
  • Help service two, screw type industrial air compressors with line pressure set at 120 psi.
  • Maintain and inspect daily air compressors, chill water, boilers, & hydraulics.
  • Rebuild and repair hydraulic cylinders, air valves, air compressors and vacuum pumps.
  • Air compressors, hydraulic presses, Band saw, Table saws.
  • Maintained air compressors and a variety of shop equipment.
  • Maintain air compressors and water softeners.

Show More

12. Mechanical Maintenance Reports

high Demand
Here's how Mechanical Maintenance Reports is used in Industrial Maintenance Mechanic jobs:
  • Prepared mechanical maintenance reports by collecting, analyzing, and summarizing information and trends.
  • Prepared mechanical maintenance reports Maintained a safe and clean working environment by complying with procedures, rules, and regulations.

Show More

13. Production Equipment

high Demand
Here's how Production Equipment is used in Industrial Maintenance Mechanic jobs:
  • Supervised all new machinery installations and performed daily repairs on high volume time sensitive production equipment.
  • Interacted with managers, equipment operators, and maintenance technicians regarding production equipment upkeep.
  • Maintain, troubleshoot and repair industrial production equipment in an injection/blow mold facility.
  • Install new equipment and safety guarding while troubleshooting production equipment.
  • Serviced and repaired glass making production equipment and conveyor systems
  • Experienced and familiar with high-speed industrial production equipment.
  • Maintained production equipment through preventive and predictive maintenance.
  • Perform electrical and mechanical maintenance to production equipment.
  • Worked with wide range of tools, both general and special tools, for certain types of production equipment.
  • Experienced in different facets of high-speed production equipment, Knowledgeable of all shop equipment and hand tools.
  • Used machine shop equipment to make new parts and replacement parts for production equipment when needed.
  • Design and make replacement parts for production equipment, maintain records of machine drawings updates.
  • Perform scheduled, preventative, corrective and diagnostic maintenance for food grade production equipment.
  • Job Description: Install and repair industrial machines, troubleshooting and maintain production equipment.
  • Repair electrical controls, automation and all production equipment as needed.
  • Repair, troubleshoot and maintain all high speed production equipment.
  • Maintained Drills, tappers, and other production equipment.
  • Design and Fabricate storage and production equipment.
  • Repair, install and/or dismantle production equipment.
  • Maintain, troubleshoot and repair production equipment and machinery in an industrial bakery General building maintenance, including plumbing and electrical repairs

Show More

14. TIG

high Demand
Here's how TIG is used in Industrial Maintenance Mechanic jobs:
  • Assisted with investigations of work related accidents and injuries or sabotage that involve machines, equipment and/or tools.
  • Responded to and investigated all call related issues throughout production shift summoned by staff.
  • Completed TIG welding and plasma cutting and stainless steel, aluminum, bronze.
  • Assisted QA in the investigations of complaints and/or deviations of utilities area.
  • Fabricate and weld stainless steel equipment using TIG process.
  • Preform sanitary TIG welding on stainless steel parts.
  • Monitored, Rebuilt, and replaced pneumatic motors, hydraulic motors/pumps Performed electrical work Welded using tig and stick methods.

Show More

15. Gear Boxes

average Demand
Here's how Gear Boxes is used in Industrial Maintenance Mechanic jobs:
  • Repair damaged motors, gear boxes, seals, bearings, sprockets, shafts, and conveyor belts.
  • Repaired and maintained the following: Conveyor belts, replace electric motors and gear boxes.
  • Assist in the removal and installation of pumps, motors, and gear boxes.
  • Change and install motors, gear boxes, and variable frequency drives.
  • Balance drive shafts for motors and gear boxes.
  • Replaced electrical and hydraulic gear boxes for conveyors.
  • Gear boxes, Agitators and mixers.
  • Inspect motors, drives, belts, conveyors, pumps, gear boxes, etc.
  • Repair or replace gear boxes, electric and hydraulic motors, pneumatics, conveyors and VFD's.
  • Replaced and Repaired large and smallmotor units including speed reducers, gear boxes and drives.
  • Installed, maintained, repaired and rebuilt gear boxes..
  • gear boxes conveyors and production equipment.
  • Repair to boilers, and steam pipes Repair conveyers, gear boxes, lacings, belts and bearings.

Show More

16. Building Maintenance

average Demand
Here's how Building Maintenance is used in Industrial Maintenance Mechanic jobs:
  • Performed all mechanical repairs on equipment * Building Maintenance
  • Have built additions, installed windows and doors, tubs, showers and many other aspects of repair/ and building maintenance.
  • Regulated the purchase order system to order necessary parts, building maintenance and performing tests on sprinkler to ensure fire safety.
  • Perform building maintenance, including carpentry, plumbing, painting and other work related maintenance of the buildings.
  • Repaired and maintained equipment to keep production running, also performed building maintenance.
  • Preform building maintenance as needed such as plumping and structural work.
  • Repair and maintain all equipment, conveyors and building maintenance.
  • Operate printing press & general building maintenance.
  • General building maintenance when needed.

Show More

17. Preventative Maintenance

average Demand
Here's how Preventative Maintenance is used in Industrial Maintenance Mechanic jobs:
  • Trained/certified as Industrial Electronics Mechanic by the United States Postal Service - conducted routing preventative maintenance/troubleshooting/repair of industrial bulk conveyor systems.
  • Perform preventative maintenance on Hydraulic, pneumatic, automatic electrical controls, Diagnosing malfunctioning equipment and replace damaged parts.
  • Perform preventative maintenance on machinery and equipment in order to increase productivity and minimize plant down time.
  • Provided routine preventative maintenance, ability to modify existing equipment for new uses, fabricated new equipment.
  • Regulated the preventative maintenance of equipment such as adjustments, cleaning lubrication and diagnosing the equipment regularly.
  • Perform and oversee daily inspections, emergency repairs, routine adjustments and periodic preventative maintenance schedule.
  • Created and revised existing Preventative Maintenance Practices/Procedures for time-based frequency repairs, over-hauls, and up-grades.
  • Provide preventative maintenance data tracking and logging to keep machinery functioning and production continuously flowing.
  • Performed maintenance and preventative maintenance on industrial equipment to ensure quality and efficiency of production.
  • Performed preventative maintenance, troubleshooting and repaired all facility equipment and building maintenance.
  • Performed preventative maintenance and repair routines on assigned mechanical assets within facility.
  • Performed general and preventative maintenance on water chillers and cooling towers.
  • Coordinate and supervise preventative maintenance and repairs throughout the facility.
  • Performed scheduled and preventative maintenance of all on site machinery.
  • Provide emergency breakdown repairs and preventative maintenance on rolling mills.
  • Performed preventative maintenance of production equipment, including lift tables.
  • Performed preventative maintenance on all plant equipment and electrical systems.
  • Disassembled and performed preventative maintenance on rolls and bearings.
  • Executed preventative maintenance actions on a time based frequency.
  • Responded to all machinery repairs and preventative maintenance projects.

Show More

18. Hvac

average Demand
Here's how Hvac is used in Industrial Maintenance Mechanic jobs:
  • Maintain, repair and update rooftop HVAC units, air handlers, exhaust fans, etc.
  • Perform maintenance of facilities HVAC equipment and controls.
  • Installed/repaired HVAC, Electrical, and Plumbing/Carpentry.
  • General maintenance throughout plant including HVAC systems.
  • Provide routine maintenance and repairs to pumps, motors, sompressors, filters, HVAC, lighting, ovens, etc.
  • Repaired and replaced HVAC systems, including air handlers, humidity controlsystems and all duct work.

Show More

19. Defective Parts

average Demand
Here's how Defective Parts is used in Industrial Maintenance Mechanic jobs:
  • Disassembled the equipment to remove defective parts by using cranes, power and hand tools, hoists and safety lockout devices.
  • Remove defective parts by dismantling devices; using hand and power tools; examining form and texture of parts.
  • Repair or replace items or defective parts of machines and equipment.
  • Replaced defective parts to ensure productivity is maximized at all times.
  • Replace defective parts of machinery as needed.
  • Replaced defective parts with new parts and repaired and reproduced parts from various kinds of metal stock, using handtools.
  • Dismantled devices to gain proper access and removed defective parts, using hoists, cranes, handtools and power tools.
  • remove defective parts by dismantling devices using hoists, cranes, and hand power tools.
  • Removed defective parts by dismantling devices; using hoists, ctranes, and hand powertools.

Show More

20. Osha

average Demand
Here's how Osha is used in Industrial Maintenance Mechanic jobs:
  • Followed company policy on safety and OSHA regulations.
  • Followed work instructions and OSHA safety rules, including the use of all PPE and other safety equipment.
  • Install PVC pipe and copper tubing on necessary equipment and adhere to OSHA Safety regulations.
  • Train and adhere to all OSHA required safety regulations to ensure a safe work environment.
  • Adhered to company policy, industry and OSHA safety standards during the facilitation work.
  • Maintain a clean, safe work area in compliance with company / OSHA Standards.
  • Established a forklift battery maintenance program in accordance with ANSI and OSHA standards/regulations.
  • Fabricated and troubleshoot on site equipment to meet OSHA standards of use.
  • Work safely in accordance with OSHA standards and other safety specifications.
  • Inspected and updated machine safety guards to meet OSHA standards.
  • Adhered to all OSHA, company, and safety regulations.
  • Full knowledge and management of OSHA regulations and procedures.
  • Observe all LOTO, OSHA and company guidelines.
  • Maintained safe and clean working environment by complying with OSHA procedures, rules, and regulations.
  • Clean room ex poser class [ ] Complied with GMP, EPA, OSHA, SOP, Industries standards.

Show More

21. New Equipment

average Demand
Here's how New Equipment is used in Industrial Maintenance Mechanic jobs:
  • Fabricated new equipment for planned improvement projects.
  • Change batteries on forklifts, maintain batteries, change light bulbs and ballasts Run conduit and wiring for new equipment, repair
  • Repair and install new conduit and electrical services and size electrical conductors' service properly for new equipment and conveyors.
  • Job duties included, but not limited to the installation of new equipment and repairs to existing equipment.
  • Tested new equipment and troubleshoot operation and make minor adjustments to equipment.
  • Fabricate and build control panels for installation of new equipment.
  • Studied updated and new equipment to maintain current knowledge.
  • Assist in installations and start-up of new equipment installations.
  • Weld to repair broken metal parts and assemble new equipment metal fabrications .
  • Install new equipment ,wiring, plumbing, and leveling.

Show More

22. Drill Press

average Demand
Here's how Drill Press is used in Industrial Maintenance Mechanic jobs:
  • Use of milling machine, drill press, metal lathe and other common fabrication shop tools were also constant practices.
  • Set up and operated equipment such as power saws and drill presses to make, repair, and/or modify parts.
  • Operate machine shop equipment on drill press, milling machine, and hydraulic press, and parts cleaner.
  • Operated power tools, angle grinders, die grinders, mag drills, drill presses, hydraulic presses.
  • Operated lathes, drill press, Bridgeport and completed welds.
  • Run lathe, drill press, milling, and plasma cutter.
  • Set up and operate lathe, drill press, grinder, and other metal working tools to make and repair parts.
  • use of cutting torches, grinders, drill presses, and gas and electrical cutting and welding equipment.
  • Shop tools, and machinery(Drill press, lathe, mill) - Hand tools - Forklift & Vertical lift Equipment

Show More

23. Plant Operations

average Demand
Here's how Plant Operations is used in Industrial Maintenance Mechanic jobs:
  • Coordinated and planned work center operations responsible for multi-million dollar electronic equipment, power plant operations monitoring and configuration.
  • Performed Preventive Maintenance and troubleshot and repaired broken/malfunctioning machinery to ensure little to no delays in plant operations.
  • Work with engineers to keep packing machinery operational while plant operations were being downsized and eliminated.
  • Collaborate with multiple plant departments to conduct strategic maintenance planning/repairs with minimal interruptions to plant operations.
  • Maintained all equipment vital to plant operations including pneumatic, hydraulic, welding and electrical equipment.
  • Developed preventative maintenance program for plant operations and assisted in starting autonomous maintenance and management practices.

Show More

24. Mechanical Devices

average Demand
Here's how Mechanical Devices is used in Industrial Maintenance Mechanic jobs:
  • Identified and resolved the source of problems by observing the mechanical devices in operation.
  • Install and maintain electrical, electronic and mechanical devices.
  • Observe mechanical devices in operation and listen to their sounds to locate causes of trouble.
  • Detected and informed about defects in mechanical devices during procedure.
  • Observed mechanical devices in operation.
  • Modified numerous mechanical devices to help equipment perform better.

Show More

25. CNC

average Demand
Here's how CNC is used in Industrial Maintenance Mechanic jobs:
  • Maintained 28 injection machines of various makes, 30 steam heated presses, also CNC mills and lathes.
  • Assembled, tested and installed new and refurbished CNC equipment and mechanisms; maintenance SCADA systems.
  • Worked on CNC machines and all lines to move pipe to next station.
  • Maintain, build, and troubleshoot various pieces of CNC machine tools.
  • Fix, repair and troubleshooting CNC and Manual Shop machines.
  • Installed new CNC machines and New Heat treating and Normalizing Furnaces used for tempering parts at 1650 for 24/7 production operations.
  • Worked with Trumpf and BLM cnc laser tube cutting machines.

Show More

26. Operations Manuals

average Demand
Here's how Operations Manuals is used in Industrial Maintenance Mechanic jobs:
  • Followed and complied with the diagrams, sketches, operations manuals, and repair instructions.

Show More

27. Pneumatic Systems

average Demand
Here's how Pneumatic Systems is used in Industrial Maintenance Mechanic jobs:
  • Maintained hydraulic systems, pneumatic systems, electrical systems and diesel equipment.
  • Maintained all Plant industrial Electrical, Hydraulic and Pneumatic systems.
  • Experienced in electronics, hydraulics, and pneumatic systems.
  • Maintain Hydraulic, Pneumatic systems.
  • Repaired and Rebuilt Hydraulic and Pneumatic Systems On Safety Committee to ensure compliance with all State and Federal regulatory agencies.
  • Maintained hydraulic systems, pneumatic systems, electrical systems and AC/DC systems.Inspected and tested equipment.
  • Trouble shoot Pneumatic Systems, mac valves and air cylinders.

Show More

28. Engineering Specifications

average Demand
Here's how Engineering Specifications is used in Industrial Maintenance Mechanic jobs:
  • Maintain production and quality by following diagrams, manufacturer's instructions, and engineering specifications.
  • Follow diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications.
  • Follow diagrams, sketches, operations manuals, manufacturer's instructions, engineering specifications, while troubleshooting malfunctions.
  • Read and follow Blue prints to engineering Specifications.

Show More

29. Heavy Equipment

low Demand
Here's how Heavy Equipment is used in Industrial Maintenance Mechanic jobs:
  • Certified to operate all types of heavy equipment such as aerial lifts, scissor lifts, and forklifts.
  • Operate heavy equipment including forklifts, boom trucks, cranes, and man lifts.
  • Operated and inspected various heavy equipment while maintaining the highest safety standards.
  • Certified by current employer to operate heavy equipment.
  • Operate several types of heavy equipment.
  • Perform a variety of maintenance tasks utilizing various tools and heavy equipment in a high-performance industrial pipe facility.

Show More

30. Repair Parts

low Demand
Here's how Repair Parts is used in Industrial Maintenance Mechanic jobs:
  • Utilized MAXIMO and SAP job tracking and repair parts ordering.
  • Repair parts on machine when necessary.
  • Managed repair parts acquisition and pursued alternatives to normal supply sources through local purchased items resulting in improved equipment readiness.
  • Performed hydraulic, pneumatic, electrical, and mechanical maintenance Fabrication of repair parts and welding
  • Managed parts inventory insuring repair parts were on hand for necessary repairs minimizing down-time.
  • Managed Stock, repair parts, and maintenance-related items required per applicable regulations.

Show More

31. Conveyor Belts

low Demand
Here's how Conveyor Belts is used in Industrial Maintenance Mechanic jobs:
  • Lace belts, adjust and track High Speed and Low Speed conveyor belts.
  • Replace conveyor belts, electrical motors, hydraulic cylinders and other mechanical parts.
  • Service conveyor belts by replacing rollers, bearings, and sprockets.
  • Maintain conveyor belts and augers make any repairs that are needed.
  • Change out large conveyor belts and chains.
  • Total over 8mile of conveyor belts.
  • Clean and maintain conveyor belts, roatar feeds , shredders, buildinget, load and unload trucks by use of bobcat,

Show More

32. AC

low Demand
Here's how AC is used in Industrial Maintenance Mechanic jobs:
  • Installed, maintained and repaired mechanical, pneumatic, hydraulic and electrical equipment in this sheet and resin acrylic-based manufacturing facility.
  • Plan and implemented alterations to ensure safety, to improve operator ergonomics, and to increase machine productivity.
  • Conduct scheduled / unscheduled / preventive maintenance of high speed manufacturing equipment in a major production facility.
  • Promoted to this maintenance position after completing Industrial Maintenance School and successful experience as a Machine Operator.
  • Maintained continuity among work teams by documenting and communicating actions, irregularities, and continuing needs.
  • Coordinate activities of workers engaged in routine maintenance and repair of machinery and equipment.
  • Documented/Recorded information relating to the repair or replacement of industrial production or processing machinery.
  • Repaired and maintained all equipment and machinery in this acrylic sheet manufacturing plant.
  • Operate newly repaired machinery and equipment to verify the adequacy of repairs.
  • Utilized precision measuring instruments to test functionality and correctly size replacement parts.
  • Test newly installed machinery and equipment to ensure proper operations and safety.
  • Repaired and maintained all equipment and machinery in hardwood flooring manufacturing plant.
  • Determined machine adjustments and material requirements to ensure quality production.
  • Performed cutting and welding preventative and corrective machine repairs.
  • Performed facility maintenance in a food processing industrial facility.
  • Performed preventive maintenance on production and packaging equipment.
  • Gathered data and information from the machinery operators.
  • Designed, built and implemented machine modifications.
  • Answered questions regarding machine calibration and performance.
  • Consulted with equipment operators regarding machinery adjustments.

Show More

33. Machine Shop

low Demand
Here's how Machine Shop is used in Industrial Maintenance Mechanic jobs:
  • Performed periodic inspections on all machine shop equipment to include CNC mills, CNC lathes, and CNC cylindrical grinders.
  • Promoted to the machine shop through a craft-training program designed for the advancement of employees.
  • Run Milling machine Run lathe and various other machine shop tools.
  • Operate machine shop equipment and make required parts when necessary.
  • Position: Industrial Maintenance Responsibilities: Industrial maintenance, welding, and general machine shop duties.
  • Developed jigs and replacement parts from engineering blueprints in the machine shop, used power tools and their associated safety procedures.

Show More

34. Overhead Cranes

low Demand
Here's how Overhead Cranes is used in Industrial Maintenance Mechanic jobs:
  • Install overhead cranes and rails.
  • Operated overhead cranes and forklifts to move manufacturing equipment and manufactured parts.
  • Operated a wide variety of equipment including overhead cranes, man lifts and forklifts.
  • Operate forklifts, various lifts and overhead cranes.
  • Conduct monthly, quarterly, and annual inspections on travel- lifts and overhead cranes with lifting capacities exceeding 70 tons.
  • Performed preventive and repair maintenance on overhead cranes, Gantry's (electric and motorized).

Show More

35. Dimensional Requirements

low Demand
Here's how Dimensional Requirements is used in Industrial Maintenance Mechanic jobs:
  • Inspect used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, and other measuring instruments.
  • determine chances in dimensional requirements of parts by using rules, calipers, micrometers, and other measuring instruments.

Show More

36. Control Instruments

low Demand
Here's how Control Instruments is used in Industrial Maintenance Mechanic jobs:
  • Adjusted functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges.
  • Modified the control instruments and the functioning part of the equipment.
  • Adjust functional parts of devices and control instruments.

Show More

37. Machine Operation

low Demand
Here's how Machine Operation is used in Industrial Maintenance Mechanic jobs:
  • Discussed machine operation variations with machine repairer to diagnose problem and assist in repairing machine.
  • Attended monthly safety meetings to ensure machine operation safety.
  • Attended monthly safety meetings to ensure machine operation safety.
  • Attended monthly safety meetings to ensure machine operation safety.
  • Evaluate equipment and machine operation for repair needs.
  • Assist in production operations and training new employees on machine operations.

Show More

38. Production Workers

low Demand
Here's how Production Workers is used in Industrial Maintenance Mechanic jobs:
  • Control downtime by informing production workers of routines preventive maintenance techniques.
  • Managed warehouse; coordinated shipping and receiving; supervised production workers
  • Trained production workers on correct operation.
  • Controlled downtime by informing production workers of routine preventive maintenance techniques Fabricated repair parts by using machine shop tools and equipment.
  • Dismantled simple and complex equipment to fix problems and replace parts Trained production workers on correct operation INDUSTRIAL MAINTENANCE MECHANIC

Show More

39. VFD

low Demand
Here's how VFD is used in Industrial Maintenance Mechanic jobs:
  • Can wire and reset VFD's, Change Solenoid water valves and other plumbing.
  • Reprogrammed the VFD's by gathering data parameters prior to replacing.
  • Replaced and program Allen Bradley VFD's.
  • Repair, install and program VFD's, troubleshoot and install PLC's.
  • Trouble Shout PLC, VFD Some Electrical work.
  • Experienced with VFD (Variable Speed Drives) programing the drive to the set perimeters.
  • Trouble shoot conveyor issues by checking VFD parameters, use Profibus Tracer and Take Readings.
  • Remove and install parts and machinery Work on VFD programming.
  • Base Industrial Maintenance and repair, Wastewater systems, Pump installaton and repair, Building maintenance, PLC troubleshoot/VFD drives.
  • Experience with conveyors and airveyors such as, air cylinders, diverters, sensors, motor/speed control/VFDs.

Show More

40. Stainless Steel

low Demand
Here's how Stainless Steel is used in Industrial Maintenance Mechanic jobs:
  • Make joint or plugs in metals such as mild steel, stainless steel, copper and brass.
  • Installed and maintained 3" to 8" steel and stainless steel process piping.
  • Work on pneumatics, hydraulics, 220v 480v motors, plumbing, mechanical, minor Welding on stainless steel.
  • Welded stainless steel materials for design modifications.
  • Hand bent 1/4 inch - 3/4 inch stainless steel tubing from lubrication system to customer equipment.
  • Welded stainless steel, steel, and aluminum wire feed and arc welder.

Show More

41. Assembly Line

low Demand
Here's how Assembly Line is used in Industrial Maintenance Mechanic jobs:
  • Designed and implemented alterations or modifications on assembly lines to ensure efficient production and operator safety.
  • Performed maintenance and repair of automated equipment, PLC-controlled assembly lines.
  • Fabricated and welded support units for assembly lines.
  • Welded pipe and metal structures for assembly line.
  • Repaired and maintained assembly linemachines and equipment in an automotive manufacturing facility.
  • JOB DUTIES: Performing maintenance onvarious office furniture machinery in order to keep the production assembly lines& plantoperational.

Show More

42. Heat Exchangers

low Demand
Here's how Heat Exchangers is used in Industrial Maintenance Mechanic jobs:
  • Perform pressure tests on process tanks, heat exchangers and troubleshooting to correct any problems not meeting industry wide standards.
  • Repair and design metal structures for vessels, heat exchangers, tank boilers, furnaces and other steel structures.
  • Obtained experience in various types of heat exchangers and hydraulic equipment.
  • Repair, rebuild or replace heat exchangers.
  • Conduct mechanical repairs on pumps, gas compressors, air compressors, heat exchangers and all balance of plant equipment.
  • Install and repair of pumps, agitators, motors, conveyors, heat exchangers and hydraulic equipment.

Show More

43. Inventory Level

low Demand
Here's how Inventory Level is used in Industrial Maintenance Mechanic jobs:
  • Check stock to determine inventory level; anticipating needed equipment, parts, and supplies.

Show More

44. Mechanical Problems

low Demand
Here's how Mechanical Problems is used in Industrial Maintenance Mechanic jobs:
  • Diagnose mechanical problems and determine the best method of repair.
  • trouble shoot electrical problems and mechanical problems.
  • Perform vibration analysis, analyze data, troubleshoot and solve mechanical problems and make recommendations for improving maintenance management programs.
  • Used schematics and blueprints to troubleshoot electrical and mechanical problems with equipment as well as equipment modifications.
  • Performed troubleshooting and repair of all plant equipment including electrical, electronics, and mechanical problems.
  • Communicate with production management and personnel to diagnose problems and to determine potential mechanical problems.

Show More

45. Part Numbers

low Demand
Here's how Part Numbers is used in Industrial Maintenance Mechanic jobs:
  • Reference all part numbers on P.C.

Show More

46. Technical Knowledge

low Demand
Here's how Technical Knowledge is used in Industrial Maintenance Mechanic jobs:
  • Maintained technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks.
  • Maintained technical knowledge by attending educational workshops.

Show More

47. Trouble Shooting

low Demand
Here's how Trouble Shooting is used in Industrial Maintenance Mechanic jobs:
  • Perform operation monitoring, trouble shooting, electrical and mechanical repairs.
  • Trouble shooting Ammonia Refrigeration Systems.
  • Job duties included repair, rebuilds trouble shooting electrical, hydraulic mechanical problems on printing press.
  • Trouble shooting high voltage electrical control panels and Logic controllers.
  • Trouble shooting and repair of evaporator Towers for juice concentrate.
  • Participate in equipment trouble shooting and problem solving.
  • Perform basic electrical trouble shooting.
  • Trouble shooting and Repair of Water pumps, Juice pumps, Sine pumps, PD pumps and High pressure Pumps.
  • Trouble shooting and Repair of industrial plastic film machines, extruders, weigh hoppers, chillers and3M tape machines.

Show More

20 Most Common Skill for an Industrial Maintenance Mechanic

Production Machines14.7%
Conveyor Systems11.4%
Electric Motors10.6%
Preventive Maintenance Requirements8.9%
Hand Tools7.3%
PLC5.5%
Hydraulic Systems5.4%
Mechanical Equipment3.8%

Typical Skill-Sets Required For An Industrial Maintenance Mechanic

RankSkillPercentage of ResumesPercentage
1
1
Production Machines
Production Machines
11.4%
11.4%
2
2
Conveyor Systems
Conveyor Systems
8.9%
8.9%
3
3
Electric Motors
Electric Motors
8.2%
8.2%
4
4
Preventive Maintenance Requirements
Preventive Maintenance Requirements
6.9%
6.9%
5
5
Hand Tools
Hand Tools
5.7%
5.7%
6
6
PLC
PLC
4.2%
4.2%
7
7
Hydraulic Systems
Hydraulic Systems
4.2%
4.2%
8
8
Mechanical Equipment
Mechanical Equipment
2.9%
2.9%
9
9
Electrical Systems
Electrical Systems
2.9%
2.9%
10
10
MIG
MIG
2.9%
2.9%
11
11
Air Compressors
Air Compressors
2.6%
2.6%
12
12
Mechanical Maintenance Reports
Mechanical Maintenance Reports
2.6%
2.6%
13
13
Production Equipment
Production Equipment
2.3%
2.3%
14
14
TIG
TIG
2.3%
2.3%
15
15
Gear Boxes
Gear Boxes
1.7%
1.7%
16
16
Building Maintenance
Building Maintenance
1.6%
1.6%
17
17
Preventative Maintenance
Preventative Maintenance
1.6%
1.6%
18
18
Hvac
Hvac
1.6%
1.6%
19
19
Defective Parts
Defective Parts
1.5%
1.5%
20
20
Osha
Osha
1.5%
1.5%
21
21
New Equipment
New Equipment
1.4%
1.4%
22
22
Drill Press
Drill Press
1.2%
1.2%
23
23
Plant Operations
Plant Operations
1.1%
1.1%
24
24
Mechanical Devices
Mechanical Devices
1.1%
1.1%
25
25
CNC
CNC
1.1%
1.1%
26
26
Operations Manuals
Operations Manuals
1%
1%
27
27
Pneumatic Systems
Pneumatic Systems
1%
1%
28
28
Engineering Specifications
Engineering Specifications
1%
1%
29
29
Heavy Equipment
Heavy Equipment
0.9%
0.9%
30
30
Repair Parts
Repair Parts
0.9%
0.9%
31
31
Conveyor Belts
Conveyor Belts
0.9%
0.9%
32
32
AC
AC
0.8%
0.8%
33
33
Machine Shop
Machine Shop
0.8%
0.8%
34
34
Overhead Cranes
Overhead Cranes
0.8%
0.8%
35
35
Dimensional Requirements
Dimensional Requirements
0.8%
0.8%
36
36
Control Instruments
Control Instruments
0.8%
0.8%
37
37
Machine Operation
Machine Operation
0.8%
0.8%
38
38
Production Workers
Production Workers
0.7%
0.7%
39
39
VFD
VFD
0.7%
0.7%
40
40
Stainless Steel
Stainless Steel
0.6%
0.6%
41
41
Assembly Line
Assembly Line
0.6%
0.6%
42
42
Heat Exchangers
Heat Exchangers
0.6%
0.6%
43
43
Inventory Level
Inventory Level
0.6%
0.6%
44
44
Mechanical Problems
Mechanical Problems
0.6%
0.6%
45
45
Part Numbers
Part Numbers
0.5%
0.5%
46
46
Technical Knowledge
Technical Knowledge
0.5%
0.5%
47
47
Trouble Shooting
Trouble Shooting
0.5%
0.5%

33,467 Industrial Maintenance Mechanic Jobs

Where do you want to work?