Industrial mechanic jobs near me - 1,661 jobs

Do you have a passion for repairing cars, assisting with providing exceptional guest experiences, and being an innovator in the automotive industry? As a Service Technician, you will have the opportunity to make a positive impact on our business and customers every day while earning the pay you deserve and awesome benefits! We are looking for smart, energetic, technically-focused Technicians who will help us redefine the car-servicingexperience. Does this sound like you? Apply now! The "B" Level Service Technician has the responsibility of understanding and completing routine repairs necessary for the repair of customer vehicles. This individual will perform general repairs and diagnosis with some assistance. These repairs include but are not limited to light engine work, transmissions, clutches, drive shafts, electrical systems (starters and alternators) HVAC systems, steering & suspension systems. This individual will have a majority of their manufacture certifications. Make accurate use of the multi-point inspection form on each vehicle Document all work performed and recommended on assigned repair order Communicate with service advisor when additional work is needed or if repairs cannot be completed within the promised time Maintain technician proficiency as specified by Asbury standards Conduct road test to determine work needed and to confirm work was successfully completed when necessary and practical Perform all levels of diagnosis and repair on vehicles Perform all levels of preventive/routine maintenance services Utilize product and technical training as assigned by the manufacturer and management Participate in manufacturer-sponsored training programs and schools to continuously expand your knowledge of new technology Maintain manufacturer (CSI) Customer Satisfaction Index at or above the Asbury specified goal(s) in service for district, regional and national scores Complete the work, notations and time-keeping necessary to the successful completion of warranty repair orders and the filing of warranty claims Report to management any situation or condition that would jeopardize the safety, welfare, or integrity of the dealership, its customers or employees Take care to ensure that customer's vehicles are returned to them as clean as they were prior to being serviced Understand and complete required training for compliance with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Comply with all federal, state and local laws, as well as company policy, regarding safeguarding all customer vehicles, property and information ASE certifications heavily preferred Manufacturer certifications heavily preferred Previous automotive technician experience required Must have basic tools Must have great technical and mechanical skills Must be a team player and have the ability to work repetitively on complex tasks Must be a minimum of eighteen years of age Must have a valid driver's license Must be able to pass pre-employment screening (background & drug test) Company Benefits: Pay and Recognition: Paid holidays & paid time off Deferred Holiday Pay Match Paid training Stock Awards(select management and front-line team member's eligible Insurance / Retirement: Insurance: medical, vision, dental, accident, critical illness and hospital indemnity plans Up to 12 weeks paid pregnancy leave (disability leave) Paid Parental Leave Health savings Flex spending accounts (tax free) Short-term and Long-term disability plans Life Insurance (Whole Life and Term) 401k with company match Learning, Tuition Assistance and Career Development: * Digital career path tool to assist with career development * Continuous training through Asbury's Internal Learning Management System Professional growth and development opportunities Additional advantages: Student loan relief resources Employee assistance program Employee discounts on parts and service repairs Scholarship awards Opportunities to join our community service initiatives, which includes paid volunteer hours Aggressive Employee referral program with bonus opportunities INDKOONS

**Job Title:** Maintenance Technician - 2nd Shift **Pay Rate:** $30.00 per hour **Shift:** 2:00 PM - 10:30 PM (Monday - Friday) Adecco is currently hiring a skilled **Maintenance Technician** for a 2nd shift opportunity in Sterling, VA. This role is responsible for performing mechanical, electrical, pneumatic, and hydraulic maintenance to ensure efficient operation of production machinery and plant facilities. **Key Responsibilities** + Perform highly diversified duties to install, troubleshoot, and maintain production machines and facility equipment. + Conduct emergency repairs of production equipment and scheduled maintenance during machine service. + Perform mechanical, electrical, pneumatic, and hydraulic troubleshooting and repairs. + Read and interpret equipment manuals and work orders to perform required maintenance. + Diagnose problems, replace or repair parts, test, and make necessary adjustments. + Perform regular preventive maintenance on machines and plant facilities. + Utilize a variety of hand and power tools, electric meters, and material handling equipment. + Detect faulty operations, defective materials, and report issues to supervision. + Support snow removal, salting, and grounds maintenance as needed. + Comply with all safety regulations and maintain a clean, orderly work environment. **Qualifications** + Minimum of 3 years' experience in maintenance within a manufacturing environment. + Experience with mechanical repairs including drives, motors, pneumatics, and hydraulics. + Skilled in electrical troubleshooting and repairs. + Knowledge of low and high-pressure hydraulics and pneumatics. + Experience with building systems and basic utility repairs. + Industrial PLC knowledge (desirable). + Strong analytical, problem-solving, and decision-making skills. + Effective verbal and written communication skills. + Commitment to safety, quality, and security. **Education:** + High School diploma, G.E.D., or equivalent required. + Technical college degree in Industrial Technology or related field preferred. **Why Work for Adecco?** + Weekly pay and competitive benefits. + Opportunities for professional growth and development. + Supportive recruitment team to guide you through the hiring process. Apply now to join our team as a **2nd Shift Maintenance Technician** in Sterling, VA! **Pay Details:** $30.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

We are seeking a skilled and reliable Maintenance Technician to join our team at a Class A apartment complex. The ideal candidate will be responsible for maintaining the property's physical assets, including the interior and exterior of the buildings, common areas, and amenities. This role requires a strong technical skill set, attention to detail, and a commitment to providing high-quality service to our residents. Compensation: $28 - $31 hourly The pay listed is the hourly range for this position. Any specific offer will vary based on the successful applicant's education, experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit ABM 2025 Employee Benefits | Front Line Team Members Essential Functions & Responsibilities Perform daily maintenance tasks, including but not limited to, plumbing, electrical, HVAC, carpentry, and painting, to ensure the property is well-maintained and meets high standards. Respond to maintenance requests from residents and staff in a timely and efficient manner, ensuring that all repairs are completed to the highest standards. Conduct regular inspections and preventive maintenance of equipment, systems, and common areas to prevent potential issues and ensure everything is in optimal working condition. Prepare vacant units for new residents by performing necessary repairs, painting, cleaning, and other maintenance tasks to ensure units are move-in ready. Maintain the property's exterior appearance by performing tasks such as landscaping, snow removal, and pressure washing, ensuring that the complex is visually appealing. Ensure all maintenance activities are carried out in compliance with safety regulations and company policies, including the proper use of personal protective equipment (PPE). Be on call for emergency maintenance issues, responding promptly to ensure the safety and comfort of residents. Assist in maintaining an inventory of maintenance supplies and equipment, ordering replacements as necessary to ensure timely repairs. Work closely with the property management team to identify and address any maintenance issues that could affect the property's operations or resident satisfaction. Maintain accurate records of maintenance work, including work orders, preventive maintenance logs, and equipment service history. Qualifications & Requirements High school diploma or equivalent required; technical certification in a related field (e.g., HVAC, electrical, plumbing) is preferred. Proven experience as a maintenance technician, preferably in a residential or apartment complex setting. Experience with Class A properties is a plus. Strong knowledge of building systems, including HVAC, plumbing, electrical, and carpentry. Ability to troubleshoot and repair complex systems. Good communication skills, both verbal and written, with the ability to interact professionally with residents, management, and vendors. Ability to diagnose problems, identify solutions, and execute repairs efficiently and effectively. Ability to lift heavy objects, work in various weather conditions, and stand or walk for extended periods. About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ************ ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis.

Academy Bus is seeking an experienced Class A Diesel Bus Mechanic for our Capitol Heights, MD location. Must have experience working on Van Hool, Temsa, and Prevost Buses. Familiar with Cummins and Detroit engines. Must have experience troubleshooting issues with Electrical & Engine diagnostics on Buses with a laptop, i.e. Detroit, Allison, Cummins. Must have own tools. Earn $34.00-$42.00 per hour, based on candidate experience level. Responsibilities: Diesel Mechanic - Class A / Level 1 Repair, troubleshooting and diagnosis of modern tour bus engines and transmissions Reconditioning, preventative and routine maintenance Inspections and road tests Warranty and repair documentation Diagnosis, inspection, installation, disassembly and cleaning of components such as: Diesel engines, electronic systems/motors/controls, drive line components, tires, bearings, brake systems, seals, radiators, water pumps, coolant hoses, alternators, regulators, steering components, oil/air filters, door assemblies, controls, belts, pneumatic valves, cables, and linkages, radiators, heating, air conditioning, alternators, generators, voltage regulators, suspensions, seating, steering, and glass. Respond to road calls General welding/fabrication Train and supervise B/C Level Mechanics and maintenance staff Requirements: Must have experience working on Van Hool, Temsa, and Prevost buses Must be familiar Cummins and Detroit engines Must have AC Certification Proven ability to use hands tools, power tools, hydraulic jacks, pullers, VOA instruments, reamers, vacuum and compression pumps, welding equipment, and testing instruments Proficient in the use of diagnostic devices such as: DDEC readers, ATEC readers, SmarTire, schematics, AIC (Freon) recovery and charging equipment Valid driver's license Basic computer skills Ability to pass pre-employment background check and drug screen CDL License with Passenger and Airbrake endorsement is a plus but not required, willingness to obtain a CDL License through our in-house training department is also desirable Health Insurance and Benefits Offered Include: Medical, Dental, Vision, Prescription, and Life insurance Supplemental coverages 401K plan Paid time off Paid holidays Academy is EEO Diesel Mechanic, Bus Mechanic, Motorcoach Mechanic, Motorcoach Bus Mechanic, Diesel Technician, Bus Technician, Motorcoach Technician, Motorcoach Bus Technician, Diesel Bus Technician, Diesel Motorcoach Technician, Diesel Motorcoach Bus Technician, Diesel Mechanic, Diesel Bus Mechanic, Diesel Motorcoach Mechanic, Diesel Motorcoach Bus Technician, Class A Mechanic, Class A Diesel Technician, Class B Mechanic, Class B Diesel Technician, Class C Mechanic, Class C Diesel Technician. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Alutiiq Logistics and Maintenance Services, LLC is seeking a skilled Maintenance Mechanic to join our team. The successful candidate will perform maintenance and repairs on all equipment under the direct supervision of the Lead Engineer or Project Manager. This position will not include standing an Engineer's watch. The ideal candidate will have a strong mechanical aptitude, experience in HVAC systems, and the ability to follow detailed orders and instructions. 1. Preventive Maintenance: o Conduct regular inspections of machinery, equipment, and systems to identify any issues. o Perform scheduled maintenance tasks such as lubricating, cleaning, and replacing worn parts to prevent breakdowns. 2. Repairs and Troubleshooting: o Diagnose and troubleshoot mechanical, electrical, and hydraulic problems with equipment. o Repair or replace defective parts using hand tools and power tools. o Test equipment to ensure proper functionality after repairs. 3. Installation and Upgrades: o Assist in the installation of new machinery and equipment. o Upgrade existing systems to improve efficiency and safety. 4. Documentation and Reporting: o Maintain accurate records of maintenance and repair activities. o Report any significant issues or concerns to the supervisor. 5. Safety and Compliance: o Adhere to all safety protocols and regulations. o Ensure all maintenance activities comply with company policies and industry standards. 6. HVAC Systems: o Install, service, and repair environmental-control systems in residences, department stores, office buildings, and other commercial establishments. o Mount compressor and condenser units, fabricate, assemble, and install ductwork and chassis parts. o Cut and bend tubing to correct length and shape, thread pipe, and join tubing or pipes to refrigerating units. o Connect motors, compressors, temperature controls, humidity controls, and circulating ventilation fans to control panels and power sources. o Install air and water filters, inject refrigerant, observe pressure and vacuum gauges, and adjust controls. o Test joints and connections for gas leaks, wrap pipes in insulation, replace defective breaker controls, thermostats, switches, fuses, and electrical wiring. REQUIRED QUALIFICATIONS AND EXPERIENCE: Clearance Required: TS/SCI Education: High school diploma or equivalent. Technical or vocational training in mechanical maintenance is preferred. Experience: Minimum of 5 years of experience in maintenance and repair of industrial machinery and equipment, including HVAC systems. Skills: o Strong mechanical and electrical aptitude. o Proficiency with hand tools, power tools, and diagnostic equipment. o Ability to read and interpret technical manuals, blueprints, and schematics. o Strong problem-solving skills and attention to detail. o Excellent communication and interpersonal skills. o Ability to work independently and as part of a team. Must possess valid driver's license Must possess TS/SCI Pursuant to Government Contract, you must be a U.S. citizen. Afognak Native Corporation and Afognak's direct and indirect subsidiaries, partnerships, joint ventures and affiliates to include Alutiiq, LLC; Afognak Commercial Group, LLC; Alutiiq Professional Consulting, LLC; and each of their respective domestic and foreign, direct and indirect subsidiaries, partnerships, joint ventures and affiliates are equal opportunity employers that do not discriminate on the basis of actual or perceived race, color, religion, national origin, citizenship status, age, sex (including pregnancy, childbirth, related medical conditions and lactation), sexual orientation, protected veteran status, disability, genetic information, or any other characteristic protected by applicable federal, state or local laws (collectively, "Protected Status"). The pay range information provided is a general guideline. The pay rate offered will be determined based on the candidate's experience and qualifications, as well as geographic locations, market data, and other business considerations, as permitted by law. Our full range of benefits include medical, dental, vision, disability protection, life insurance, prescription coverage, voluntary benefits, paid leave, and 401(k) retirement. Positions covered by the McNamara O'Hara Service Contract Act (SCA), Davis-Bacon Act (DBA), or a Collective Bargaining Agreement (CBA), or Fair Labor Standards Act (FLSA) will comply with the statute or CBA requirements as well as other client-customer contract requirements (all benefits are subject to eligibility requirements). For more information, please visit our Company's Career page.

Akridge is a full-service commercial real estate company and a prominent investor and developer in the Washington, DC and North Carolina regions. We invest in, develop, and manage commercial real estate, from office buildings to mixed-use space. Since our founding in 1974, Akridge has acquired, developed, or entitled over 14 million square feet of commercial real estate and land. We believe in transforming the landscape of our nation's capital through places that make working more productive, playing more delightful, and living in our city more harmonious. Akridge is committed to sustainable development and operating practices, and has been recognized as an Energy Star Top Performer and Energy Star Partner of the Year. Some of Akridge's most notable projects include the 1 million square foot Gallery Place, the internationally recognized Homer Building, and the 3 million square foot Burnham Place air rights development project at Union Station. Akridge is proud to invest, build, and operate properties that provide lasting value for our investors, quality work environments for our Clients, and vibrant neighborhoods for our community. Our fully integrated platform allows us to enhance a property's value throughout every stage of development and operations. We acquire and develop properties that generate consistent and strong, above-market returns for our investment partners. Our developments become destinations that attract high-quality Clients and make neighborhoods more desirable. Our comprehensive real estate knowledge and experience enables us to create smart investment strategies that respond to market opportunities. Our operating and development expertise gives us an unparalleled ability to execute these strategies and deliver exceptional results. Akridge invests like an operator, and operates like an investor. Position Summary: The Maintenance Technician is responsible for providing supplemental support to various locations within the Akridge portfolio as required. This role will be heavily focused on working where needed and will provide signifcant mentorship and training opportunities, with exposure to a broad range of engineering components and issues. Schedule flexibility is a must. Individual should have minimal experience in at least one of the following areas: general maintenance, light carpentry, plumbing, electrical, basic HVAC, and knowledge of safety procedures. This position reports directly to the SVP of Technology and Engineering, who will oversee the day-to-day duties and deployment of the individual to other properties. Schedule will adjust on an as needed basis, with as much notice as possible. On-duty hours may be driven by demand for support in the portfolio. Individual must be able to accommodate after hours and weekend work, and may be requested to respond 24/7, as back up to the assigned building engineering staff. Overtime is authorized as approved by supervisor and for emergencies. Position Responsibilities: Duties include, but are not limited to: • Diagnose and perform minor and routine maintenance/repairs in a timely and professional manner. • Complete assigned preventative maintenance. Maintain accurate records and documentation in electronic work order system. • Respond to and complete corrective maintenance I service requests. Maintain accurate records and documentation in electronic work order system. • Remove snow from sidewalks, driveways, and parking areas, using snow blowers, and snow shovels, and spread snow melting chemicals. • Perform effective emergency maintenance (after hours) as required and follow-up with email to building team, CE, and SVP. • Be easily accessible by mobile phone and email at all times throughout work day. • Make efficient and effective use of email communication with CE, SVP, and building teams being supported. • Send end of day email with specific tasks completed to CE each day. Position Qualifications: • Must have high school education, equivalent, or trade school • Must be able to understand, speak and write English • Must have and maintain a valid driver's license • Must have a dependable means of transportation to get to and from job sites at any time • Must have general knowledge on portable devices (cell phone, tablets, etc) • Must be computer literate • Must be in good physical condition and have the ability to lift up to 50 lbs. • Must be able to kneel, crouch, climb, crawl, etc. to reach items in need of repairs. • Must be able tolerant of all extremes of hot and cold weather, as may be necessary • Must have or obtain CFC Universal Certification within 90 days Use of Tools: Must be knowledgeable and skilled in the safe use and maintenance of the following: • Hand tools: Various wrenches, screwdrivers, grips, sledge hammer, hammer, snips, saws, etc. • Power Tools: Wrenches, grinder, sander, drill, saws, etc. • User-Moved Aids: Wheelbarrows, dollies, hand trucks, buckets, hoists, jacks, stepladders, full ladders, double ladders • Mechanical Equipment: Motors, pumps, compressors, blowers, electric and hand-powered • Measuring Devices: Voltmeters, ohmmeters, testing meters, PH tests, etc.

Job Title: Packaging Mechanic Overview: The Packaging Mechanic plays a crucial role in ensuring smooth operations by performing setups and maintenance tasks on assigned production lines. This position requires in-depth knowledge of each component in a bottle packaging line, the correct setup, connection between components, and efficient completion of changeovers. The ideal candidate can operate multiple machines simultaneously and perform maintenance on various equipment within the bottle packaging area, including bottle unscramblers, tablet counters, cappers, labelers, and case packers. Key Responsibilities Perform moderate to complex adjustments, maintenance, and repairs on packaging and pneumatic equipment. Conduct machine changeovers, troubleshoot mechanical and basic electrical systems, and make appropriate repairs. Execute daily preventative maintenance on packaging equipment, conveyors, compressors, and assist with equipment installations. Complete work orders for machinery repairs, interpret equipment manuals, diagnose issues, replace or repair parts, test, and adjust equipment. Utilize hand and power tools, electric meters, and material handling equipment in daily tasks. Set up full line configurations independently, identifying and reporting any faulty operations or defective materials. Ensure compliance with company policies, cGMPs, ethical practices, and SOPs, completing documentation such as operation logs and batch records accurately. Perform quality inspections during operations, adhering to product quality standards, and execute all required sampling and testing. Train and guide Packaging Operators in safe and effective machine operation, including breakdown and sanitation tasks. Adhere to proper gowning and hygiene as per SOPs and cGMPs, promoting a safe work environment by following all safety protocols. Support other mechanical or maintenance needs as required and maintain regular, punctual attendance with flexibility for extended hours and occasional weekend overtime. Additional Responsibilities Perform additional job-related tasks as assigned by management. Requirements Education and Experience: High school diploma or GED equivalent. Minimum of 2 years of experience in mechanical maintenance of bottle packaging lines, including troubleshooting, repairs, setup, and disassembly. 2+ years of experience in nutraceutical, supplement, food, or pharmaceutical manufacturing in a maintenance mechanic role for bottle packaging lines. Knowledge, Skills, And Abilities Ability to work effectively in a team environment, read and interpret blueprints, schematics, manuals, and work orders. Proficient in using measuring equipment like micrometers, calipers, scales, and Volt/Ohm Meters. Familiarity with cGMP and OSHA standards; strong mechanical aptitude for machine repair and troubleshooting. Basic English reading and writing skills, with PLC knowledge being an added advantage. General proficiency with PCs. This role requires a mechanically inclined individual capable of ensuring optimal operation of packaging machinery while maintaining the highest standards of product quality and safety. Send us an email to *********************** and tell me why you're interested.

The A&P Mechanic - Boeing 737-MAX 8 BBJ is responsible for performing high-level maintenance, inspections, troubleshooting, and repairs on the Boeing Business Jet (BBJ) MAX 8 aircraft. This position supports a VIP/ VVIP aviation environment that requires exceptional technical expertise, meticulous attention to detail, and the highest standards of safety, confidentiality, and professionalism. The ideal candidate has advanced experience with the 737-MAX platform, knowledge of BBJ-specific systems and modifications, and the ability to maintain both airframe and cabin systems to meet elevated customer expectations. Key Responsibilities Aircraft Maintenance & Repair Perform scheduled and unscheduled maintenance on the 737-MAX 8 BBJ, including A/B checks, cabin systems maintenance, and BBJ-specific modifications. Troubleshoot and repair MAX-series systems, including advanced avionics, fly-by-wire spoiler systems, LEAP-1B engines, and modernized electrical architecture. Conduct inspections and repairs on high-end interiors, cabin management systems (CMS), entertainment systems, lighting, galley equipment, and VIP-customized installations. Execute component replacements, SB/AD compliance, structural repairs, and configuration-controlled cabin changes per BBJ documentation. Support AOG recovery and rapid-response troubleshooting in remote or international locations as needed. Regulatory Compliance & Documentation Ensure all maintenance actions comply with FAA regulations, company procedures, and BBJ-specific maintenance programs. Accurately document work performed in digital maintenance tracking systems and aircraft logbooks. Review and apply Boeing AMM, BBJ CMP, SRM, IPC, WDM, and service bulletins. Coordinate with Quality Assurance for inspections, major repairs, and return-to-service authorization. Inspection, Diagnostics & Troubleshooting Perform detailed inspections of airframe, powerplant, avionics, and high-touch cabin systems unique to BBJ configuration. Utilize advanced diagnostic equipment and built-in test systems (BITE) to identify and resolve MAX 8 discrepancies. Conduct borescope inspections on LEAP-1B engines, APU troubleshooting, and avionics system evaluations. VIP Cabin, Interior & Special Systems Support Maintain and repair VIP furnishings, luxury materials, cabinetry, and premium finishes. Troubleshoot and support Cabin Management Systems (CMS), satellite communications, Wi-Fi, Blu-ray/AV systems, and aircraft internet hardware. Work closely with flight crews and cabin staff to ensure the aircraft meets VVIP standards of comfort and functionality. Safety, Quality & Operational Excellence Uphold the highest levels of safety, confidentiality, and customer service expected in VIP aviation environments. Support continuous improvement of maintenance processes, reliability programs, and long-term fleet health monitoring. Maintain a clean, organized workspace and strictly follow OSHA, company, and regulatory safety protocols. Coordinate with operations, flight crew, engineering, and supply chain for aircraft readiness and mission reliability. Required Qualifications Valid FAA Airframe & Powerplant (A&P) Certificate. 3-5+ years of experience maintaining Boeing 737 platforms, ideally the MAX series. Strong experience with: Boeing Business Jet (BBJ) interior and cabin systems LEAP-1B engines and MAX-series avionics Digital maintenance platforms (AMOS, TRAX, CMP, or equivalent) VIP cabin repairs, CMS systems, and premium interiors Ability to read and interpret Boeing technical data, BBJ CMP manuals, engineering drawings, and wiring diagrams. Capable of working in high-standards VIP or corporate aviation environments. Must possess an active Secret (or TS/SCI) security clearance or be eligible to obtain one. Preferred Qualifications Boeing 737-MAX or BBJ GenFam / Maintenance Training Certification. Prior experience with VVIP fleet operators, corporate aviation, charter, or government executive transport. FCC License, NCATT or avionics endorsements, or AET certifications. AOG experience with international travel capability. Strong understanding of cybersecurity and data sensitivity for VIP aircraft systems. This position does not offer relocation assistance; local candidates are preferred. Core Competencies Extreme attention to detail and craftsmanship High professionalism and discretion Strong troubleshooting and diagnostic capability Excellent communication and teamwork Ability to adapt in high-tempo VIP operations Customer-service mindset for VVIP standards

Knauf Insulation North America is the world's fastest-growing insulation manufacturer. We are wholly committed to the conservation of the environment while also sustainably developing and manufacturing a comprehensive line of acoustical fiberglass insulation for residential, commercial, industrial, marine, OEM and metal building applications, using post-consumer recycled materials. We welcome passionate and creative individuals who thrive in an entrepreneurial, collaborative and ever-changing environment. Pay Rate: Starting at $36.10/hr. Perfect Attendance Bonus: $.75/hr. Up to a 5% quarterly bonus! Our benefits go beyond just providing coverage. We're committed to the whole you - your health, wealth, peace of mind, self and community. Our benefits include: Free near-site Health Care Facility Medical, Dental, Vision - starting on day one! Virtual Medical Services Fertility and adoption benefits 401(k) Retirement Plan (earn 100% matching on your first 6% contribution and fully vested day one) Paid parental leave Paid family leave Company provided Salay Continuance (Short- term Disability) Company paid life insurance Paid Time Off (PTO) Paid Holidays Vacation Tuition Reimbursement Employee Assistance Program (EAP) A full-time work schedule that allows you to only work half the time! Plus, more! Growth opportunities are available! Apply online or contact us to hear why our employees appreciate being part of the Knauf family! About the Role: Join us to keep a high-performing plant safe and running! You'll champion LOTO and safe practices, pull equipment for service when needed, perform preventive maintenance, and secure parts to cut downtime. You'll communicate across shifts, log issues, keep an organized shop, and respond to safety warnings. Punctuality and flexibility for overtime/occasional shift coverage required-stay engaged in safety meetings and pitch in on other projects. Responsibilities Champion safe work every day-follow and coach lockout/tagout (LOTO). Spot issues early and decide when to pull equipment for repair to minimize downtime. Perform scheduled and on-demand preventive maintenance to keep lines running. Requisition and track parts and materials, so teams have what they need. Act quickly on safety warnings and signals; take corrective action. Keep operations connected by communicating across shifts and documenting in Maintenance and Production logbooks. Maintain a clean, organized maintenance area; store tools and supplies before breaks and at shift end. Be dependable: arrive on time, work required hours including mandatory overtime and occasionally cover other shifts. Stay current on plant and safety updates; participate in meetings and trainings. Pitch in on other duties and projects as needed. Drive the highest levels of employee retention and engagement to ensure a sustainable workforce. Foster a culture of innovation, collaboration, and accountability within the organization. Instill an environment of inclusion, where all employees feel that they can contribute and impact the company in a positive manner. Qualifications Education: High school diploma or general education degree (GED); or equivalent combination of education and experience. Must be able to obtain and maintain current OSHA Certified Industrial Truck Operator License. Experience: Minimum of five (5) years of maintenance experience working with a variety of mechanical equipment in a heavy industrial environment. PLC experience is required. Automated technician experience required. To perform this job successfully, individuals must demonstrate the following: Observe safety and security procedures, report potentially unsafe conditions, and use equipment and materials properly. Accurately count and perform basic math functions, including mental calculation of simple equations and/or fractions. Must be able to sufficiently read, write, and understand English. It is the policy of Knauf Insulation to provide equal employment opportunities to all qualified persons without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status or any other protected characteristic prohibited by applicable law.

Loudoun County Government has been named one of Forbes' 2025 Best Large Employers! We're proud to be recognized nationally for our commitment to employee satisfaction and excellence in public service. At Loudoun County, we bring together talented professionals from all backgrounds to make a meaningful impact in a dynamic, growing community - that's The Loudoun Difference . Welcome and thank you for your interest in employment with Loudoun County Government! ALL SECTIONS OF THE APPLICATION MUST BE COMPLETED IN ITS ENTIRETY. THE RESUME IS CONSIDERED SUPPLEMENTAL INFORMATION ONLY. APPLICATIONS THAT ARE INCOMPLETE OR INDICATE 'SEE RESUME' WILL NOT BE TAKEN INTO CONSIDERATION. Job Summary The Department of General Services is seeking qualified applicants for Systems Maintenance Technician I positions within the Facilities Support Division. The successful candidate will work closely with technicians or crew chiefs and will: * Assist by having materials, tools, and equipment ready as repairs progress * Assist with demobilization and cleanup when repairs are completed * Respond promptly and directly to work requests * Diagnose, initiate, and complete minor mechanical, electrical, and plumbing repairs in County Government facilities * Receive and close out work requests by computer and/or hand-held electronic device * Inspect facilities and report HVAC, plumbing, and electrical problems or unsafe conditions * Keep vehicles fully stocked with appropriate tools and materials * Must provide superior customer service at all times Hiring salary is commensurate with experience. Minimum Qualifications High school diploma or equivalent; one (1) year of related work experience in HVAC, electrical, plumbing, mechanical, automotive, and/or security system trades; or equivalent combination of education and experience. Job Contingencies and Special Requirements Successful candidates will undergo pre-employment criminal, credit, and DMV record background checks, to include Criminal Justice Information Systems (CJIS) fingerprinting. Valid driver's license and good driving record are required (driving records may be reviewed annually for continued qualification). Hold or obtain CFC license within six (6) months of hire. Must be able to work in extreme temperatures and lift up to 70 lbs. Some work may be hazardous due to location or type of work. Subject to recall or being held beyond scheduled workday. Must be available to respond to County emergencies (24/7) as directed in accordance with Department policy and written or verbal directive.

Moore is a data-driven constituent experience management (CXM) company achieving accelerated growth for clients through integrated supporter experiences across all platforms, channels and devices. We are an innovation-led company that is the largest data, media, and marketing company in North America serving the purpose-driven industry with clients across education, association, political and commercial sectors. The Mechanical Maintenance will oversee the performance and maintenance of production machinery. Observe mechanical devices in operation and listen to their sounds to locate causes of trouble Dismantles devices to gain access to and remove defective parts MAINTENANCE & SERVICE Services equipment and other items as assigned Services or replaces defective parts Installs special functional and structural parts in devices Keeps an ongoing list of miscellaneous maintenance that needs to be done Sets up and operates equipment and tools to make and repair parts Uses and reads volt meter, computer, and tape measure Works overtime and weekends when necessary Oils and lubricate moving parts on machines to ensure effective performance Records and reports damaged, worn, or broken parts. Orders and installs replacement parts for machines. Identifies the causes of unexpected breakdowns of machines. Repair broken machines quickly and efficiently. QUALITY CONTROL Activates devices to test their performance Inspects used parts to determine changes in dimensional requirements Examines form and texture of parts to detect imperfections Check and recheck any work before putting the machine back online Adjusts functional parts of devices and control instruments SAFETY Checks to ensure that all areas in the plant meet OSHA standards Knows and follows all safety procedures Reports work-related injuries to supervisor Education: High School/GED or equivalent Benefits: Health insurance Paid time off. Dental insurance 401(k) Vision insurance Moore Company participates in committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Moore Company is also committed to compliance with all fair employment practices regarding citizenship and immigration status. Moore Company participates in the E-Verify program. Must be authorized to work in the United States and successfully pass a comprehensive criminal background investigation.

The Maintenance position performs a variety of manual labor jobs with varying degree of skill needed to assist with the maintenance of park grounds, equipment, and facilities. Pay Rate: $15.50 per hour Major Duties/Specific Tasks Mow grass using a variety of equipment which may include push mowers, tractors and/or specialized lawn equipment. Perform various landscape maintenance to include weeding, mulching edging and raking. Operate small engine equipment such as chain saws, backpack blowers and line trimmers. Establish plant beds, plant flowers, bulbs, shrubs, and trees, and maintain planted areas. Pick up litter and debris. Perform facility maintenance such as repairing and staining picnic tables, installing and repairing fences, replacing light bulbs, and preparing for special events. Assist with repair and/or maintenance of electrical, plumbing and HVAC systems. Operate park vehicles which may include pickup trucks, 4-wheel motorcycles, dump trucks and garbage trucks. Clean & organize maintenance shop. Clean restroom & picnic shelters. Assist with routine maintenance/repair of equipment to include changing oil, oil filters, replacing worn parts, and making minor mechanical adjustments. Sharpen or replace worn blades on mowers; replace string on line trimmers; sharpen or replace worn chain saw chains. Prepare and load equipment & tools for use and/or to transport. Run errands to retrieve and/or delver parts, etc. Perform manual labor and related work as required. Assist with public relations by handling visitor inquiries, and providing information and assistance. Attend and participate in staff meetings and in-service training. Report unsafe conditions to the Park Maintenance Supervisor. Carry out additional duties as assigned by the Park Maintenance Supervisor or Supervisor on Duty. Minimum Qualifications Must be age 18 or over. High school diploma with minimum of one year experience in park maintenance work, or any equivalent combination of education, training, or experience. Ability to operate small engine equipment properly and safely. Ability to operate a variety of vehicles with standard transmissions. Mechanical aptitude with ability to make minor repairs on equipment. Knowledge of park maintenance procedures and equipment. Ability to communicate effectively and courteously with the public. Ability to learn the operation of the facility. Strength and dexterity necessary to perform all required tasks, including lifting, stooping, bending, and working in tiring and uncomfortable positions. Ability to perform heavy manual labor in a variety of weather conditions. Availability to work a variable work schedule, which may include early and late hours, and weekends and holidays. Ability to understand and follow oral instructions. Possession of or ability to obtain valid driver's license, must maintain safe driving record. Required to purchase and wear standard uniform. Please see job description PI281269195 Job distributed by JobTarget.

Job Announcement Join the Park Authority and our nationally recognized team of professionals! The Fairfax County Park Authority (FCPA) is seeking Maintenance Worker to be a part of one of the most highly regarded park systems in the country. With more than 25,000 acres of parkland, nine Recenters, eight golf courses, three lakefront parks, and more, FCPA is an exciting organization to be a part of and there are many opportunities for staff to make a difference at every level. Under the supervision of the Senior Maintenance Worker, this position participates in a variety of unskilled, semi-skilled and skilled tasks such as litter and debris removal, snow removal, mowing and string trimming, fence repair, carpentry, painting, tree trimming, removal of downed trees, irrigation repair and fertilizer and pesticide application. Leads the daily activity of other staff in the absence of the Senior Maintenance Worker and also maintains daily logs of equipment maintenance and other required reports in the absence of the Senior Maintenance Worker. Regular and predictable attendance is an essential function of the position. Illustrative Duties The illustrative duties listed in this specification are representative of the class but are not an all-inclusive list. A complete list of position duties and unique physical requirements can be found in the position job description.) Collects and/or disposes of refuse, yard debris, recyclables, and other solid waste materials; Clears sidewalks of ice and snow; Cleans facilities, to include removing trash and litter; Loads and unloads trucks; Performs routine building maintenance tasks (e.g., replacing light bulbs, moving, and making minor repairs to furniture); Repairs and maintains walkways, gutters, and downspouts; Applies pesticides, fertilizer, and other chemicals under supervision of a certified pest applicator; Maintains and repairs grounds and turf (i.e., reconditioning, vegetation control, and repairs); Repairs irrigation systems (i.e., sprinklers, valves, and pipes); Performs various landscaping tasks, to include propagating beds, edging, mulching, and planting; Performs minor building and/or equipment repair and/or maintenance; Operates tractors and mowers, chain saws, or cutoff saws; Engages in safe working practices and complies with safety programs and guidelines; Reports unsafe working conditions; Complies with safety competencies. Required Knowledge Skills and Abilities (The knowledge, skills and abilities listed in this specification are representative of the class but are not an all- inclusive list.) Basic knowledge of construction and maintenance of asphalt and concrete; Working knowledge of small equipment to include weed eater, push mower, power tamper, chain saw, concrete saw and gas generator; Basic knowledge of air compressors and pneumatic tools; Knowledge of and the ability to use and perform basic scheduled maintenance on various types of hand tools, machinery, etc.; Knowledge of occupational hazards and applicable safety practices; Ability to perform duties requiring manual dexterity and mechanical aptitude; Ability to operate various types of motor vehicles; Ability to follow written and verbal instructions; Ability to work outside with regular exposure to severe weather, noxious fumes, high levels of dust, etc.; Ability to perform medium to heavy manual labor; Ability to comprehend and comply with safety practices; Ability to maintain effective relationships with customers, employees, and supervisors. Employment Standards MINIMUM QUALIFICATIONS: Any combination of education, experience, and training equivalent to completion of the tenth grade. NECESSARY SPECIAL REQUIREMENTS: The appointee to this position will be required to complete a criminal background check to the satisfaction of the employer. PREFERRED QUALIFICATIONS: Experience performing maintenance activities to golf courses and parks using a tractor with attachments, riding mowers, small equipment Experience with chainsaws, weed-trimmers, edgers, blowers, and walk behind mowers. Experience with the repair and maintenance of outdoor maintenance equipment such as mowers, tractors and landscape equipment. PHYSICAL REQUIREMENTS: Ability to stand for extended periods. Ability to wear respirator and other safety equipment. Bending and stooping; ability to mount/dismount various grounds care equipment; lifting up to 50 pounds. All duties may be performed with or without reasonable accommodations. SELECTION PROCEDURE: Panel interview; may include exercise. Fairfax County is home to a highly diverse population, with a significant number of residents speaking languages other than English at home (including Spanish, Asian/Pacific Islander, Indo-European, and many others.) We encourage candidates who are bilingual in English and another language to apply for this opportunity. Fairfax County Government prohibits discrimination on the basis of race, color, religion, national origin, sex, pregnancy, childbirth or related medical conditions, age, marital status, disability, sexual orientation, gender identity, genetics, political affiliation, or military status in the recruitment, selection, and hiring of its workforce. Reasonable accommodations are available to persons with disabilities during application and/or interview processes per the Americans with Disabilities Act. TTY . /AA/TTY. #LI-SP1

Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: - Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems. - Troubleshoots electrical issues. - Responds to daily maintenance requests in a timely fashion to minimize equipment downtime. - Provides emergency/unscheduled repairs of production equipment. - Diagnoses problems, replaces or repairs parts, tests and makes adjustments. - Looks for opportunities to continually improve maintenance processes. - Works with all plant personnel in a cooperative and professional manner. - Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry. - Ensures work is performed safely and efficiently. - Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices. - Studies blueprints and manufacturers' manuals to determine correct operation of machinery. - Proficient in reading electrical schematics. - Maintains accurate and timely records of maintenance performed. - Follows written and verbal instructions and performs other tasks as directed by supervision. - Complies with all Federal, State and local laws. Additional Functions: - May work with and support other branch personnel as required by supervision. - Drive and pick up parts, transport equipment, parts, etc. Qualifications: - Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations. - Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications. - Proficient in the proper use of power and hand tools. - Strong electrical troubleshooting ability of 3 phase 230 volt systems. - PLC programming experience. - Experience in carpentry, boiler repair, welding, and general facility repairs. - Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management - Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: - High school graduate or equivalency preferred. - Some locations may require relevant certifications, a boiler license or PLC programming. Typical Physical Activity: - Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: - Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: - Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Keep Fort Wayne's water and wastewater facilities running at peak performance! Join the City of Fort Wayne as an Industrial Maintenance Mechanic II. City of Fort Wayne - Filtration Plant/ Water Pollution Control Plant Industrial Maintenance Mechanic Pay: $26.61 - $31.93 per hour Schedule: 7:00 a.m. - 3:00 p.m., may vary Location: Fort Wayne, IN What You'll Do: * Install, maintain, and repair water and wastewater plant equipment, including 100+ remote facilities * Perform preventative and predictive maintenance, rebuild tanks, clean filters, and maintain rotating pump assemblies * Operate heavy equipment including vac trucks, loaders, forklifts, and backhoes * Conduct painting, masonry, carpentry, glazing, welding, and machining tasks * Use CMMS to track maintenance, labor, and materials * Enter, exit, and work safely in confined spaces * Respond to emergency breakdowns and remain on-call as needed * Collaborate with operators and management to maintain regulatory compliance Must-Have Qualifications: * High school diploma/GED plus 3 years hands-on mechanical experience, OR associate degree in related field plus 2 years experience * CDL Class B w/Tanker endorsement (within 1 year of hire) * Confined Space Entry Certification * CPR, First Aid, and Bloodborne Pathogens certification * Strong mechanical, troubleshooting, and communication skills Why Join Us: * Work in a hands-on, essential role maintaining Fort Wayne's water infrastructure * Competitive pay with opportunity for skill growth and technical autonomy * Be part of a team keeping our community safe and operational Equal Opportunity Employer Make a real impact maintaining Fort Wayne's water and wastewater systems! Employment is contingent upon the successful completion of applicable drug screening, physical examination, and background checks.

North American Millwright Services is a well-established and trusted Millwright Contractor that takes on some of the most complex industrial maintenance/manufacturing projects in the Chesapeake Region. This is your chance to join a growing, dynamic team and have a rewarding career. We are hiring team-oriented millwrights, entry-level through senior level. Rigging and Welding certifications or experience a plus (TIG, MIG, Stick); in-house training also available. Total Compensation Package includes: Competitive Pay Medical Dental Vision Life Insurance (at no cost to you!) Disability Insurance (at no cost to you!) 401(k) Plan (up to 8% match!) Uniforms (at no cost to you!) Safety shoe reimbursement Paid Holidays Paid Time Off Discretionary Bonus Tuition Assistance Job Summary A millwright is tasked with installing and maintaining equipment used in multiple industries. Work includes installing, transferring, dismantling, and repairing equipment and machinery. Job sites vary from factories, mine sites, and other industrial sites. Millwrights must be able to make decisions, troubleshoot, and perform repairs with little to no supervision. The ideal candidate will be have a strong working knowledge of industrial maintenance, welding and rigging. Duties and Responsibilities Adheres to all NAMS policies and OSHA/MSHA safety rules & regulations Takes swift action to stop any imminent danger situations you may encounter Promptly reports all accidents and near misses, including minor first aid and property damages prior to end of shift; Conducts daily workplace exams; identifies and promptly resolves potential hazards or immediately barricades area or equipment and contacts NAMS and/or the customer's safety team to resolve Builds the foundation for machines Constructs and installs equipment such as shafting, conveyors and rails Review and interpret engineering specifications, schematics and blueprints to determine work procedures Grind and file machinery parts Work with a range of hand tools, measuring tools, welding and brazing equipment Determine which machines, techniques, and tools to use specific to each job Travel to customer job sites, including extended stays during from time to time Requirements and Qualifications High school diploma or certification in a skilled trade Completion of accredited millwright certification program a plus 3 years' relevant experience in an industrial or construction setting Ability to read drawings, plans, and blueprints and convey this information to others Ability to communicate effectively including interpersonal skills; must be a team player Aptitude in math Attention to detail Strong decision making and problem-solving Good physical condition and stamina Valid Driver's License with an acceptable driving record Owns minimum personal tools required for essential tasks Physical Requirements: Frequently required to walk, sit, stand, balance, stoop, bend, push, pull, lift, reach, kneel, crouch, crawl and climb stairs/ladders and use of hands Must have vision, hearing, and ability to talk Exposure to hot/cold temperatures Must be able to lift up to 50 pounds at times Ability to travel independently throughout multiple NAMS facilities including customer job sites North American Millwright Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

* Employee Referral Eligible* Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Repair and Maintain Plant Equipment. Perform repairs and maintenance throughout the plant including screen changes, conveyor belt repair and adjustment, wear parts replacement, crusher liner changes, and water pump service. Perform cutting, grinding, and welding as needed. Repair and Maintain Mobile Equipment. Perform minor repairs to front end wheel loaders and skid steers including hydraulic hoses, bucket cutting edges, and other miscellaneous repairs to maintain safe operation. Perform PM services on mobile equipment on a scheduled basis including lube services and sampling. Inspect Equipment and Structures. Perform daily inspections and maintenance of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Monitor Processes and Materials. Monitor and review the plant, specifically various aggregate crushing, washing, and screening areas to identify problems and ensure safety and materials compliance. Document and Record Information. Enter and maintain service and lubrication reports regarding the plant equipment used to ensure preventative maintenance is up to date. Perform General Physical Activities. Perform a variety of tasks that assist with the operation of the plant, including cleaning, washing, sweeping, and shoveling materials. Railcar Unloading: Assist in the rail unloading process as needed, including operating the rail car mover, operating air actuated gates, monitoring unloading equipment and setting rail car handbrakes. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in the aggregate or construction industry is preferred. Knowledge of Best Practices. Knowledge of general principles and practices of industrial maintenance, construction, or aggregate production is preferred. Flexibility. Must be able to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Shift Differential. At Vulcan Materials Company, Northeast Division, Night Shift employees are paid a Shift Differential of an additional 10% on their base pay if the employee works certain hours during the designated time period. We believe the additional compensation helps to offset the inconvenience of working less desirable hours. Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Hourly Range. The hourly range for this role is between $22.44 - $29.04. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

EMCOR Services CES has an immediate need for a HVAC Journeyman Mechanic in Washington, DC. The HVAC Mechanic trouble shoots, repairs, installs, and performs preventative maintenance on all the HVAC systems within the Central Utilities Plant (CUP), and other buildings related to the contract by performing the following duties. This is a journeyman position and requires mechanical, electrical, and plumbing aptitudes. This is a part time position. The hours are 9:00 AM to 9:00PM Saturday and Sunday and Holidays. This position is covered by the CBA for Local 99. #EGS #LI-NS1 Essential Duties and Responsibilities: Monitors safe and efficient operations of HVAC/refrigeration systems in accordance with departmental requirements; corrects deficiencies according to PM/CM and manufacturers specifications. Conducts preventive and corrective maintenance on all HVAC and refrigeration systems, as well as fan coil or dx units, and other equipment as assigned. Installs and services new HVAC/refrigeration equipment. Perform all aspects of repairs to Air Handling Units (AHU) to include filter replacement, bearing replacement, motor replacement, belt replacement and proper alignment in accordance to OEM procedures. Coordinates inspections, repairs and installation in consultation with staff in affected areas to minimize disruption of operations. Complete Work Order and Preventative Maintenance (PM) paperwork in a timely and professional manner. Participates in the computerized maintenance management system for work and equipment documentation Participate in the building management system. Monitor design parameters for status and efficiency. Assist in programming recommendations for the system. Track refrigerant loss, procurement, and storage per government standards. Install, maintain and repair all field devices for the Temperature Tracking System. Participate in the testing of HVAC shutdown by duct smoke detectors. Performs heating, ventilation, and air conditioning (HVAC) maintenance on air conditioning units, fans, air handlers, water heaters, converters, duct work and system controls. Request assistance from plumbers, painters, electricians, carpenters, and Building Engineers when necessary. Coordinates inspections, repairs, and installation with staff and tenants in affected areas to minimize disruption of CNRIC operations. Ensures compliance with department safety and quality standards to optimize effective utilization of resources and productivity. Follow and implement standard Lock Out Tag Out procedures. Complete Corrective Maintenance and Preventive Maintenance (PM) work orders in a timely and professional manner. Attends weekly Tool Box safety meetings Obtain OSHA 10 General Industry Safety and Health certification. (EMCOR provided training) Qualifications: At least there (3) years of applicable experience. Must have a current Journeyman HVAC License Must have a current Universal CFC License. Must possess a valid Driver's License. Experience with Microsoft Office Must complete an OSHA 10 General Safety and Health training class (supplied by EMCOR). Must be able to read and understand architectural and mechanical drawings. Must be able to read and understand manufacture's submittals and literature. Review and provide recommendations to preventive maintenance inspections and procedures. Must be able to specify and order material and replacement parts for equipment as necessary. Must be able to understand and implement infectious control policies and procedures. Must be able to work a schedule of 9:00 AM to 9:00 PM Saturday and Sunday and Holidays. This position will require the successful candidate to show proof of a complete COVID-19 vaccination. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee is frequently required to stand. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee maybe exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; cold and heat; risk of electrical shock and vibration. The employee is occasionally exposed to the risk of radiation. The noise level in the work environment is usually moderate. Compensation: $43.39 per hour Other Compensation: NA Benefits: Health and Welfare Benefits consistent with the Collective Bargaining Agreement Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

**Applicants must have an Active Top Secret/SCI US Government clearance with polygraph. Note: US Citizenship is required to maintain a Top Secret/SCI clearance with polygraph.** The contractor will be responsible for the proper repair and maintenance for a large fleet of forklifts and related equipment of various brands (predominately Raymond). The forklift fleet consists of a variety of electric, gas-, and diesel-powered units designed for interior and exterior building use. The contractor shall be responsible for maintaining a comprehensive maintenance schedule, obtaining approval for the schedule from appropriate government focal points, and adhering to the schedule in order to ensure all forklift units are mechanically ready for use and safe to operate. The contractor shall manage a spare parts inventory and make all levels of repairs when necessary. The contractor will also be responsible for repairing and maintaining pallet jacks and carts. **Duties/Tasks and Responsibilities** + Schedules, prioritizes, inspects, and repairs forklifts, pallet jacks, and carts + Determines, within prescribed value range, when a major component/ assembly is to be repaired, rebuilt, replaced or discarded + Responsible for assisting with the purchasing of parts and services + Required to maintain fleet and training vehicles; and prepares written estimates on cost and labor time for corrective repairs. + Interacts with customers to keep them informed of status of vehicles, repairs needed, etc. + Based on assignment, independently performs corrective maintenance and repairs to the fleet. Informs government focal point if a task cannot be safely performed alone. + Inspects, diagnoses and isolates vehicle and equipment malfunctions; troubleshoots, traces and locates defects and/or causes of mechanical problems to determine type and extent of necessary repairs. + Repairs all assigned forklifts and equipment to ensure they are safe and dependable. + Inspects and tests equipment for mechanical defects, and replaces worn parts. + Removes, replaces, adjusts, or cleans defective parts or components + Perform oil changes, check fluids, diagnose tread wear, charge and repair batteries and trouble-shoot problems. + Inspects/replaces hydraulic lines/hoses as needed. + Ensure braking and electrical systems are optimal. + Utilizes appropriate techniques and procedures in accordance with manufacturer's specification + Identifies necessary parts, equipment and supplies needed to complete repair or preventative check. + Road tests vehicles during and occasionally upon completion of maintenance/repair work. + Responds to emails and telephone calls. + Performs other related duties as required or as directed by Supervisor regarding forklift and equipment maintenance. **Knowledge, Skills, and Abilities** + Extensive knowledge of the operating systems used in forklifts and associated hydraulic, pneumatic, and electrical systems. + Extensive knowledge of the practices and tools used in the maintenance and diagnostics of forklifts and equipment. + Considerable knowledge of computer, electrical, transistorized and other non-mechanical systems and how they tie-in with and affect the operation of mechanical systems. + Considerable knowledge of the full range of tools, equipment, test procedures and practices used in the repair and preventative maintenance of forklifts. + Excellent interpersonal and customer service skills. + Experience diagnosing complex mechanical and related malfunctions. + Expertise in reading technical manuals, references and specifications and service and recall bulletins. + Written communication skills necessary to write routine correspondences, maintenance logs and order forms. + Expertise in how to operate a forklift, power tools, wrenches, diagnostic equipment, and jacks. + Working knowledge of computers, including Microsoft Access and Microsoft Office Suite. + Adaptability to prioritize and schedule multiple work requirements. + Flexibility in work schedule. + Representational skills necessary to interact with outside vendors. + Working knowledge of diesel, gas, and electric mechanics. + Experience welding simple parts. **Work Environment** The work is usually performed inside on concrete surfaces where there is exposure to drafts, noise, and fumes from vehicles. Forklift technician - Senior occasionally perform work outside under adverse weather conditions. They are continually exposed to dirt, dust, and grease, and to the potential for burns, chemical irritations, shocks, bruises, cuts, and strains. To reduce dangers and irritations from these conditions, they follow prescribed safety practices and use safety equipment such as safety shoes and glasses, and respirators. Tools used in this occupation: + Hand and power tools + Scanners + Modular diagnostic information systems + Welding equipment + Lifts **Minimum Qualifications** Active TS/SCI Clearance with Polygraph Experience: Ten (10) years of experience in the problem diagnosis, repair and maintenance of a wide variety of forklift maintenance. Education: High school Diploma or GED equivalent. Special Certifications: + Certified in the safe operation of forklifts by the Sponsor within 30-days of commencing work and every 24-months as required. + Certified maintenance on Raymond brand forklifts. + Other pertinent forklift maintenance certifications. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .