Industrial radiographer jobs near me - 52 jobs

The Industrial Painter/Powder Coater will be responsible for prepping, setting up, and coating racks of metal products in the manufacturing facility. This role involves reading job orders, prepping, racking, and masking parts for painting or powder coating. Additionally, the position requires preparing and mixing paint or powder specific to each job and color, as well as setting up paint and powder coating machinery according to job specifications. **Responsibilities** + Read and interpret job orders for painting and powder coating tasks. + Prep, rack, and mask parts for painting or powder coating. + Mix paint or powder specific to each job and color. + Set up paint and powder coating machinery per job specifications. + Utilize required personal protective equipment (PPE) to coat materials in paint and powder coating booths. **Essential Skills** + 3+ years of industrial coating experience, including spray painting with HVLP or powder coating. + Proficiency in paint prep and machinery setup for paint and powder coat processes. + Experience with booth and racked parts painting. **Additional Skills & Qualifications** + Combination of powder coating experience and wet paint is ideal. + Understanding of safety protocols, especially in facilities with tanks filled with liquid for plating and general manufacturing equipment. **Why Work Here?** Our company is growing and offers a great culture with room for advancement as we continue to expand. Being part of a small, expanding company allows for personal growth and career development. **Work Environment** The facility is in York, PA and is not climate controlled. Openings are available on 2nd shift (Mon-Fri, 2p-10p) and 3rd shift (Sun-Thur, 10p-6a), with training on the day shift (Mon-Fri, 6am-2pm) for approximately four weeks. **Job Type & Location** This is a Contract to Hire position based out of York, PA. **Pay and Benefits** The pay range for this position is $28.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully remote position. **Application Deadline** This position is anticipated to close on Jan 29, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description Join a company where your skills are recognized, your safety comes first, and your growth never stops. Martin Painting & Coating has built its reputation on consistent quality and strong relationships with clients and employees alike. Our painters work on meaningful projects, from universities to warehouses, and take pride in creating results that reflect excellence. You'll Be Responsible For: Surface prep, sanding, cleaning, and coating application Using brushes, rollers, and spray equipment with accuracy Following strict safety protocols and PPE use Maintaining organized, efficient job sites Benefits & Pay: $22-$27/hr depending on experience Full medical, dental, and vision coverage PTO, holidays, and paid training 401(k) match + ESOP ownership Career advancement and leadership opportunities If you want to work where hard work and effort are rewarded, Martin Painting & Coating is your next great career move.

Industrial Painter Steel Equipment Specialists is a leading player in the steel equipment manufacturing and engineering industry, committed to delivering top-quality products and services to our clients. With a strong dedication to safety, innovation, and delivering innovative solutions to our customers, we are seeking an experienced, skilled, and detail-oriented painter to join our 3rd Shift team. Position Overview: The successful candidate will be responsible for applying paint and other coatings to steel equipment and structures, ensuring a high-quality finish that meets our rigorous industry standards. Key Responsibilities: • Prepare surfaces for painting by cleaning, sanding, applying primers and masking appropriate surfaces. • Mix and apply paints, varnishes, and other coatings using brushes, rollers, and spray equipment. • Inspect finished surfaces for quality and make necessary touch-ups or corrections. • Maintain and clean painting equipment and work areas. • Follow all safety protocols and guidelines to ensure a safe working environment. • Maintain technical equipment for the production jobs and ensuring they are in working order • Possess experience with a wide array of painting tools including thin and thick brushes, airbrushes and rollers • Remove previous paint surfaces using PPE masking or a chemical rinse • Collaborate with other team members to meet production deadlines and quality standards. • Keep accurate records of work performed and materials used. Qualifications: • High school diploma or equivalent. • Proven experience as an industrial painter, preferably in a manufacturing environment. • Knowledge of various painting techniques and materials. • Ability to read and interpret blueprints and technical drawings. • Strong attention to detail and commitment to quality. • Excellent hand-eye coordination and manual dexterity. • Ability to work independently and as part of a team. • Good physical stamina and the ability to lift heavy objects. • Reliable transportation and strict punctuality and attendance habits. • 3 to 5 years of hands-on experience in a manufacturing environment

Applied Technical Services, LLC (“ATS” or the “Company”) is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is currently accepting resumes for both part-time and full-time NDT Technicians for our NDT Workforce Division. Technicians will work on outages, shutdowns, and project work where they will be dispatched directly from their home, travel will be by personal vehicle and or air travel. Per diem and mileage will be paid. This is a fully remote division; these positions will cover work opportunities with ATS throughout the United States. The ideal candidates will be self-starters who work well unsupervised, have strong safety and quality ethics, are leaders, can problem solve on the go, are punctual, have excellent time management, are fiscally responsible, trustworthy, and reliable. Responsibilities/Duties: NDT Technicians/Inspectors Conduct NDT inspections in 2 or more methods as a Level II or III MT/PT/UTT/UTS/VT/ET/PAUT/RT technician Preform API 510 and/or API 570 and/or 653 inspections Preform AWS-CWI inspections Leverage expertise to resolve problems in the field or during the manufacturing processes Make recommendations after analysis of the data using quality tools Protect the intellectual property rights of the Company Function as a team lead when appropriate Provide technical guidance and mentoring to less experienced inspectors Set up, conduct tests, and calibrate equipment Work independently and provide support to team members Prepare reports and other documents in an accurate and timely manner Interface daily with client about work priorities and projects Perform other job-related tasks as assigned by management Qualifications Minimum: Requirements/Qualifications: NDT Level II Technicians - Must meet the minimum requirements of an NDT technician per ASNT-TC-1A, provide documentation of education, training, and OJT experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. AWS-CWI and/or API 510 and/or API 570 and/or API 653 All applicants require the following: Ability to learn and comply with all company policies and procedures. Excellent communication skills written and verbal. Applicants must pass a drug screen and have a valid driver's license with a clean driving record. “U.S. Persons” Only: A requirement of this position is access to information that is subject to U.S. export controls under the U.S. International Traffic in Arms Regulations (“ITAR”). Accordingly, the company will consider only “U.S. Persons” for this position. A “U.S. Person” includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., “green card” holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States. This information is collected solely for purposes of complying with U.S. export control requirements and will not be used to unlawfully discriminate in the hiring process. Work Conditions: Must be able to wear safety equipment as required by the safety department for personal protection. Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc. Work in confined spaces which will require crawling, stooping, climbing, etc. Work in around operating equipment and industrial environments. Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc. Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time Ability to lift and carry 100 pounds. Benefits: ATS offers excellent wages and advancement opportunities. ATS full-time employee benefits include: medical, dental, vision, 401k, vacation, personal time, and bonuses. EOE/AA/M/F/Vet/Disabled ATS is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

We are excited to be adding a Painter to the MAC Trailer Team. Our Painter utilizes and implements acquired skill and knowledge through training and experience to paint steel, aluminum, and parts to satisfy the needs of the tractor trailer industry. Please note that shift hours are Mon - Thurs 7am - 5:30pm with additional overtime. What we offer you: · Competitive Pay · Perfect Attendance Bonus Program · Career Growth Opportunities · Clean Manufacturing Environment · On-site Wellness Clinic · Referral Bonus Program · Medical, Dental, and Vision Plans · Employee Assistance Program · Employer Paid Life Insurance · Long-term and Short-term Disability · Legal Planning · Theft Protection · Critical Illness Coverage · Accident Coverage · 401k with Match · Vacation Time · Paid Holidays · Prescription Safety Glass and Safety Shoe Program · Employee Engagement Events · Philanthropy Efforts Master Trailer Builder Program: Here at MAC Trailer, we pride ourselves on our people and rewarding their hard work. Our Master Trailer Builder program was built to recognize our employees on the shop floor that meet the following criteria: excellent attendance, years of service, mastery of technical skills, ability to train others, willingness to work overtime, and positive attitude. Master Trailer Builders get to enjoy benefits like quarterly bonuses, picture hung on the wall, and an assigned parking spot. Who we are: MAC Trailer is the nation's foremost manufacturer of dump, flatbed, and transfer trailers, straight truck bodies, dry bulk pneumatic tanks, and liquid tank trailers. The success of MAC Trailer can be attributed to a quality product built by quality people. This is why MAC Trailer invests in its people and facilities to create a safe, secure work environment with room for training and growth. If you're interested in being part of a diverse workforce in a supportive work environment, MAC Trailer is the place for you. What you will do: Perform and abide by safety policies and procedures while performing tasks and other related assignments Review specification documentation and information related to assignments to ensure products are manufactured to customer specifications and MAC quality standards Dispose of hazardous waste according to company policy and communicated regulation training Select paint according to company requirements and match colors of paint according to specified color charts Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes Disassemble, clean, and reassemble sprayers and power equipment using solvents, wire brushes, and cloths for cleaning duties Spray prepared surfaces with specified amounts of primers and decorative or finish coatings Safely utilize basic hand and power tools including air drill and grinder Communicate issues of concern and any other pertinent information that affects the productive completion of quality product to supervisor Clean work areas during and at the end of the shift Organize and restock needed parts and materials Assist other employees as needed and instructed Any other duties assigned Who you are: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to work any shift based on production need Ability to work alone or with a team Ability to work assigned shift and/or extended shift hours. Mechanical proficiency Familiarity with and willingness to safely utilize basic hand and power tools (such as air drills, grinders, etc.) Ability to comprehend and interpret detailed drawings and measurements Ability to read and comprehend simple instructions, short correspondence, and memos Ability to write simple correspondence Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization Basic math skills Critical thinking skills to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems Oral comprehension and expression skills to listen to and understand information and ideas presented verbally and then effectively communicate the information and ideas verbally Ability to concentrate on a task over a period of time without being distracted Ability to communicate, abide by, verify, and logically respond to safety policies, procedures, and concerns Education and/or Experience Experience with and knowledge of paint spray guns and how they work is preferred Experience or knowledge in tractor trailer building is preferred Experience in a manufacturing-related field is preferred Physical Demands Ability to see details at close range while reviewing inventory information Ability to lift 50 pounds Ability to grasp and manipulate large and small items Ability to read, interpret, and comprehend detailed drawings, specifications, measurements, and safety policies and procedures Ability to push, pull, and lift various materials including aluminum, steel, and parts Ability to maneuver self in order to view safe operation of load and obstructions of material and/or pedestrians Ability to physically inspect own work and perform work in various positions and heights Ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position Ability to successfully maneuver, lift, climb, bend, kneel, and stoop Ability to work in a Plant/ Manufacturing environment EEOC Disclaimer MAC Trailer is an Equal Opportunity Employer. MAC Trailer does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is currently accepting resumes for both part-time and full-time NDT Technicians for our NDT Workforce Division. Technicians will work on outages, shutdowns, and project work where they will be dispatched directly from their home, travel will be by personal vehicle and or air travel. Per diem and mileage will be paid. This is a fully remote division; these positions will cover work opportunities with ATS throughout the United States. The ideal candidates will be self-starters who work well unsupervised, have strong safety and quality ethics, are leaders, can problem solve on the go, are punctual, have excellent time management, are fiscally responsible, trustworthy, and reliable. Responsibilities/Duties: NDT Technicians/Inspectors * Conduct NDT inspections in 2 or more methods as a Level II or III MT/PT/UTT/UTS/VT/ET/PAUT/RT technician * Preform API 510 and/or API 570 and/or 653 inspections * Preform AWS-CWI inspections * Leverage expertise to resolve problems in the field or during the manufacturing processes * Make recommendations after analysis of the data using quality tools * Protect the intellectual property rights of the Company * Function as a team lead when appropriate * Provide technical guidance and mentoring to less experienced inspectors * Set up, conduct tests, and calibrate equipment * Work independently and provide support to team members * Prepare reports and other documents in an accurate and timely manner * Interface daily with client about work priorities and projects * Perform other job-related tasks as assigned by management

Industrial Painter/Industrial Coater First shift$20-$23/hr Primary Purpose of the Job: This position prepares steel surfaces for Plastisol lining and spray painting of corrosion test chambers and related equipment. The chambers are coated with Plastisol lining material and the coating is “cured” utilizing an industrial oven. Once coated, primer and paint are applied utilizing a paint spray gun in a spray booth. The position involves a great deal of forklift maneuvering. It also requires respirator usage for certain tasks. Essential Duties: 1. Review and analyze orders for accuracy/applicability. 2. Inspect sandblasted steel structures for dents or areas that need additional prep; Repair or prep accordingly. 3. Apply primer to prepare parts and structure for plastisol coating. 4. Operate a forklift to hold/manipulate structure(s); apply plastisol to steel structures; and adhere plastisol to structure using an industrial oven to “bake” coating. 5. Ensure complete, seamless and even plastisol coating of all structures and parts; all interior chamber shell sides, as well as chamber edges and trough. 6. Inspect coated steel structures for dents or areas that need additional prep; Repair or prep accordingly. 7. Grind steel surfaces using hand-held grinders and tools to prepare surfaces for paint. 8. Mix paint and hardeners properly and apply primer and paint coats utilizing a paint spray gun. 9. Observe health safety by wearing prescribed protective masks and/or breathing apparatus during processes. Other Duties: 10. Perform routine machine, equipment, and facility maintenance. 11. Keep all work areas clean and organized. 12. Document time and material for parts and equipment. 13. Follow all safety policies. 14. Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality seamless customer service. Required Skills/Experience: ? Experience with performing autobody work, metal surface prep, spray booth painting, paint guns, and/or working with an industrial oven, a plus. ? Ability to learn job-related material through oral instruction and observation. ? Ability to safely operate forklift. ? Ability to accurately read measuring instruments (i.e. rulers, tapes, gauges, etc.) ? Strong mechanical background and the ability to use basic hand and/or power tools. ? Ability to trouble-shoot: determine what is causing an operating error and decide what to do about it. ? Strong work ethic - ability to report on time for all scheduled workdays/shifts. Required Education: Basic reading, writing, and arithmetic are required. A high school diploma or equivalent is required. Additional technical training would be a plus. 1-3 years manufacturing experience also a plus. Working Conditions: Working conditions are normal for a manufacturing environment. Machine and tool operation requires the use of safety equipment to include but not limited to: eye safety glasses, hearing protection and respirators. Position includes the ability to: ? Remain in a standing position for extended periods of time. ? Bend or stoop repeatedly or continually over time. ? Lift objects up to 75 pounds. #IES1

Description: Intermountain Electronics (IE) is a leading provider and manufacturer of custom engineered Process, Electrical Control and Power Distribution turn-key solutions to the Data Center, Industrial, Power/Utility, Oil & Gas, Mining industries in North America. Our products range from large scale one-off custom Power Distribution, Control and Process systems to standard off-the-shelf electronic/electro-mechanical components. Reporting directly to the Paint Supervisor we are currently seeking an Industrial Painter for our [SHIFT] to be based at our [LOCATION] facility. Why you will love working at IE You will love the challenge, interesting and varied work, and endless opportunities, but most importantly you will love working with a team of fun loving, driven, and generous go getters that take deep personal pride in being part of a family that is building the infrastructure that powers the world. Job Description Job Title: Industrial Painter Job Status: [FULL TIME OR PART TIME] Benefits: Competitive salary PTO (Paid Time Off) Paid Holidays (10) Medical and Dental Plans Teladoc 24/7/365 Access to U.S. Board Certified doctors Employee Assistance Program Company Paid Life Insurance Supplemental Vision, Life, STD & LTD Insurance 401K- Company match up to 6% of base salary. Health Savings Account (HSA) with available company match up to $2000 based on family size. Paid Parental Leave Position Summary: The Industrial Painter is responsible for using a variety of tools to both prepare a surface for painting and for painting the objects' surface. Objects painted are complex large steel structures such as buildings, skids, E-houses, a variety of fabricated parts and components. The painter must plan out the job to assure complete surface coverage at the level of thickness designated in the job specifications and using approved standards. Work Schedule: [Insert Shift Core Hours] Essential Functions: Other Duties May Be Assigned Remove paint and finishes; prepare surfaces for application of paint, other finishes, or specialized surfaces, coverings, or coatings. Inspect and repair surfaces to identify any damage or imperfections that need to be addressed before painting. Read and understand blueprints, quality documents, and other specifications or customer requirements. Wash and clean all surfaces to remove dirt, grease, or other contaminants. Mask and prepare buildings, parts, and skids. Identify characteristics of surfaces to be coated and ensure proper preparation and application of coating. Mix and match paint colors, and other finishes according to specifications. Prepare paint materials and equipment used for a variety of applications. Apply various coatings including epoxy, enamel, and urethane paints, as well as spray foam insulation to a variety of surfaces using high volume, low pressure airless, and conventional paint equipment. Monitor and check quality to ensure coating is applied evenly and according to specifications to reduce re-work. Clean up and maintain all paint equipment and paint booth areas. Operate a variety of power and hand tools and equipment, including applicators, and pressure washing equipment. Read, understand, and follow all MSDS information for products being used in paint area Maintain painting equipment such as hoses, pumps, pressure tanks, spray guns, paint booth, etc. Wear appropriate personal protective equipment as indicated by the assignment. This may include head socks, respirators, protective disposable suits, face shields, gloves, and others as necessary. Safely dispose of any chemicals or paints used in the paint process, and safely store all chemicals according to regulations including OSHA, EPA, and other local jurisdiction requirements. Other Essential Duties Maintain regular and consistent job attendance and comes to work on time. Maintain, support, and promote a safe work environment while complying with all of IE's safety rules, policies, and procedures. Follow and comply with IE Core Values INTERMOUNTAIN ELECTRONICS, INC. Date Prepared: Rev 1/1/24 Requirements: Knowledge, Skills and Abilities: High School diploma, GED or equivalent preferred, with at least one year's experience working as an industrial painter or paint preparation technician, or an equivalent combination of experience and education. At least 6 months of training or education in painting at a recognized trade school or apprenticeship program is preferred. Ability to read, interpret, understand, and determine painting needs and the methods to meet them. Read and implement painting blueprints/traveler plan specifications. Must be able to read, and understand production reports, MSDS related to product, and all associated safety procedures. Must be able to establish productive and effective communication ties and relationships with co-workers, supervisors, customers, and staff. Ability to read and interpret documents, write routine reports and correspondence, and understand basic math. Must be able to calculate figures and amounts such as paint quantities, paint thickness, dry time, Mil spec., etc. Ability to understand and know company operation costs and production costs and production overrun costs. Ability to analyze and understand project specifications and documents and successfully resolve practical problems and they may occur. To perform this job successfully, an individual should have a basic knowledge of Microsoft Office, Microsoft Outlook word processing software Must have OSHA Forklift Certification. Must be able to pass a pulmonary functions test and wear a respirator. Must comply with and follow all IE standards, programs, policies, and procedures as they apply to this position, reports any unsafe condition immediately. Must be able to operate/work safely around machinery/moving equipment. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds. Standing for extended periods of time. Ability to work at heights of up to 25 feet. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is regularly required to stand and walk on concrete floors and uneven surfaces. Work Schedule: Must be able to work a 40-hour work week and overtime as necessary. Disclaimer: Although Intermountain Electronics has attempted to accurately and thoroughly describe this position, the Company reserves the right to change the same, including, add to or subtract from the duties outlined, within the sole discretion of the Company, at any time, with or without advance notice.

Job DescriptionGTC is a Federal Contractor: *Must be 18 or older *Must be US Citizen *Must be able to pass a multi-panel drug test *Cannot not have a felony/criminal record Multiple 2nd Shifts Available: 2nd - 5:30pm - 5:30am (2nd shift is Monday through Friday - 4/12s) 2nd - 5:30pm - 3:30am (2nd shift is Monday through Friday - 5/10s) 2nd - 5:30pm - 3:30am (2nd shift is Monday through Thursday - 4/10s) 25% Pay differentiation for 2nd shift FUNCTION: Performs all painting operations and related finishing or assembly requirements to customer specifications. KEY RESULT AREAS Parts are handled, prepared, painted, and assembled to customer specifications and standard shop practices. Parts are finished and coated consistent with best practices, specifications, and aesthetic standards. Foreign objects are detected and prevented from contaminating the coating process. DUTIES AND RESPONSIBILITIES: Determines best application practices for all paints/coatings based upon customer specification requirements and product technical information data. Disassembles unpainted parts and accessories as required and reassembles after painting. Prepares and applies customer specified coatings to achieve film thickness, gloss, and appearance standards to meet all specifications. Keeps paint kitchen, application equipment, paint booth, and paint storage area organized, clean, secure, and consistent with best 6S practices. Duties are performed in a safe manner to ensure compliance with safety specifications and environmental requirements. DESIRABLE KNOWLEDGE/EDUCATION High school diploma or GED required. Acceptable visual acuity including color differentiation. Demonstrated ability to read paint/coating formulas and mix paint/coatings accurately. Thorough working knowledge of surface preparation techniques such as finishing, filler material, sealing, color mixing, and masking. REQUIRED EXPERIENCE/SKILL Two years expertise as industrial or automotive painter with demonstrated skill in surface preparation, mixing and application of industrial coatings and finishes, setup and operation of HLVP, siphon feed, gravity feed, and pressure feed spray equipment.

The Rope Access - NDE Technician is responsible for carrying out standard rope access operations under the direct supervision of an authorized Level 3 rope access supervisor. The technician will use Industrial Rope Access methods and related equipment to access and complete a wide variety of inspection, maintenance and other industrial work tasks while on ropes or in difficult access areas. Technicians must have the ability to perform work that is physically demanding, have good communication skills and the ability to assimilate a large amount of new information. Responsibilities may also include rescue operations, technical reports and administrative tasks. Work hours, locations, shifts and nature of work assignments vary greatly and travel may be required. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern; * Performs all duties as assigned and adheres to TEAM's Core Values and 7 Critical Choices. * Utilizes proper personal protective equipment. * Follows the Rope Access Supervisor's or the Rope Access Lead Technician's directions. * Displays a healthy respect for heights and follows all OSHA, site specific and Team safety procedures. * Understands work permits and participate in job hazard analyses. * Participates in required training, rope access certification sessions and maintains a working understanding of rope access safe working practices. * Works in accordance with TEAM rope access policies and Rope Access Code of Practice. * Inspects and verifies rope access systems and components before use. * Recognizes worksite hazards and notifies the Rope Access Supervisor of any unsafe conditions. * Maintains proficiency at rescue techniques and assist in rescues as directed and in accordance with certification level. Job Qualifications * Minimum of a High School Diploma or equivalent * Minimum 18 years of age. * IRATA / SPRAT certification * NDT/ NDE Certification preferred * Travel required. * Must have a capacity for work at height. Work Conditions * Field duties require outdoor work in a plant atmosphere with varying weather conditions. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis. Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping. * Tasks may also include physically moving and setting up inspection equipment (maximum component weight +/- 50 lbs.). * Climbing and working off of ladders, stairs, scaffolding and objects in excess of 100 ft. * Working extended hours and standing for extended periods of time. * Work in indoor and outdoor environments in conditions of extreme heat and/ or cold. * Work in and near industrial hazards. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Ability to maintain focus and multitask effectively. * Exhibits sensible and responsible behavior. * Must meet IRATA/SPRAT certification requirements

Full-time Description Industrial Painter B-TEK Scales, LLC. |************* Canton, OH | Full-time |Hourly | 3rd Shift |M - Th, 8 PM - 6 AM B-TEK Scales, LLC, is a manufacturer of high-capacity truck, rail, floor, and bench scales for weighing solutions in Canton, Ohio. Job Summary We are seeking a painter with industrial spray-painting experience to join our team. In this position, you will be responsible for the prepping and the painting of the steel weldments. This position is also responsible for the set up, clean up, and maintaining of the multiple paint systems and paint booths. Should have knowledge of different coatings and application methods as it would apply to large steel weldments. Job Requirements Identify and obtain pertinent information from shop order and shop drawings regarding painting requirements. Set up and operate spray paint systems and pressure-pot paint spray systems to apply prime coat and topcoat paints. Work with solvents, cleaners, paints, and coatings Perform safe operation of standard forklift and overhead cranes for movement of materials Perform housekeeping in the painting areas; maintain operating supplies for painting and perform routine maintenance of all tools and equipment required by this position. Assist in prepping, sanding, and reworking paint Follow standard work procedures Adhere to all safety standards Minimum Requirements 3 years of experience as industrial or commercial painter preferred Requires agility and ability to move up and down and around weighbridge modules. Required to stand and walk for long periods; reach with hands and arms, climb stairs, ladders, and scaffolds. Ability to stoop, kneel, crouch, and crawl Have an eye for detail and understanding of the paint application Ability to lift up to 50 lbs. Wear respirator, body suit, and rubber gloves Compensation and Benefits: Competitive hourly pay Healthcare benefits - Medical, dental, vision, and more 401k w/ 3% company contribution Paid vacation and holidays Profit sharing Brechbuhler Scales, Inc. and B-TEK Scales, Inc. is proud to be an equal opportunity workplace and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, national origin, religion, age, disability, marital status, veteran status, genetic information or any other status protected by federal, state or local law.

Tosoh SMD, Inc. is a global leader in semiconductor materials. Our superior products help customers introduce cutting-edge technologies that make our lives easier and move us into the future. Our state-of-the-art manufacturing facility and materials laboratory located in Grove City, OH manages the entire life cycle of our products, including supply chain development, research and development, manufacturing, testing and distribution. Our innovative and devoted team of scientists, engineers, metallurgical experts, manufacturers and managers continuously collaborate and strategize to improve and create new materials for a wide range of customers' semiconductor needs. These products are used in many final applications like automotive, mobile devices, computers, artificial intelligence, 5G networks and industrial automation. As one of over 100 Tosoh Corporation's family of companies our motto is "We Make the Material That Makes Your Devices Work". Non-Destructive Testing The Non-Destructive Test Lab analyzes TSMD's products for physical defects, primarily using ultrasonic test methods. Primary characterization methods include ultrasonic defect scanning, ultrasonic weld integrity scanning, and ultrasonic bond integrity scanning. Technicians in the NDT Lab, position-dependent, operate test equipment, write non-conforming product reports, perform routine calibrations, and interface with the shop floor data collection software. Technicians work with ultrasonic test equipment in an ISO14001/ISO9001 certified environment. Position Charter The Technician I supports TSMD's laboratories and technical teams with sample preparation, test preparation and execution, data analysis, product processing, and project support. Position Profile 2 nd shift position, working hours from 2:00 pm to 10:00 pm, Monday through Friday Reporting Relationships The Technician I reports to their Area Supervisor or Engineering Manager. Major Duties and Responsibilities Prepares samples and processes products. Sets up equipment, assemblies, and experiments. Collects data per work instructions or experimental plans. Prepares reports with data and analysis. Supports senior level technicians and engineers with project execution. Understands and adheres to all safety requirements. Communicates identified risks to leadership and assists in resolution. Completes all 5S (Sort, Set in Order, Shine, Standardize, and Sustain) standards to maintain a safe, organized, and efficient work environment. Maintains regular and reliable attendance. Contributes to culture through alignment with company values and code of conduct. Maintains a positive attitude, displays enthusiasm for assigned tasks, and communicates effectively and professionally with team members. Other related duties. Education High school diploma required. Skills and Qualifications Works under general supervision. Basic computer skills. Working knowledge of Microsoft programs: Word, Excel, and Outlook. Able to keep detailed notes and well-organized data. Physical Requirements Ability to lift and move up to 40 pounds on a regular and routine basis. Frequent bending and twisting required. Must be able to stand and walk for extended periods of time. Must be able to wear required personal protective equipment (PPE) as defined by process. Tosoh SMD, Inc. is an Equal Opportunity Employer M/F/Disabled/Veterans

Pay: $26.00 - $34.00 per hour Job description:Inova Staffing is searching for a NDT tech for one of our clients on the west side of Cleveland. This is a direct hire 1st or 2nd shift position. 1st M-Fri 7:30am-3:30pm 2nd M-Thur 3:30pm-1:30am The NDT tech is responsible for ensuring the quality of welds through comprehensive inspections, adhering to industry standards and contractual specifications. The role involves providing detailed data and drafting reports that meet NDT inspection criteria for our valued customers. Preparation of Quality Plans, Inspection, and Test Reports will also be within the scope, along with reviewing and certifying final documentation. The ideal candidate should demonstrate proficiency as a minimum NDT Level I/II, with a minimum of 600 logged hours in any two of the following areas: Visual, Dye Penetrant (Type I and Type II), Magnetic Particle (Dry Method & Wet Method). You'll be responsible for setting up and executing NDT test procedures, interpreting specifications, and providing guidance to trainees. Strong written communication skills are essential for preparing instructions and reporting examination results. Flexibility is key as you'll work both independently and collaboratively to support team members and fulfill other job-related tasks as needed. What We're Looking For: ASNT-TC-1A certification in two or more NDT Methods: Visual Examination (VT), Liquid Penetrant (PT), Magnetic Particle (MT). Previous Level II Certification to ASNT-TC-1A with documented classroom and on-the-job training experience. Preferably certified as a Level II in Visual Examination (VT), Liquid Penetrant (PT), and Magnetic Particle (MT). Current AWS CWI certification is a plus. Experience in inspecting metal fabrications, pressure vessels, piping, tanks, or gas systems. High school diploma or equivalent. Inova Staffing is an Equal Opportunity Employer

NDT Technician - Level II | Cleveland Want to build large complex fabrications for submarines? That's one of the important things we do here at AT&F. If so, learn more about our team, how we work together, and the amazing fabrications we build at ********************** Stay Local in Cleveland. No travel. Secure company with a large backlog of work. You are part of the AT&F Family starting on the first day. Medical benefits start on your first day. Who Are We? We Build, Protect, Energize, and Move the World through Metal Fabrication Founded in 1940, AT&F is a major producer of components for construction cranes, mining equipment, defense projects, structural sections for shipbuilding, power industry related components, and specialty stainless steel fabrications. AT&F is comprised of specialized Business Units (BUs): Heavy Fabricating, Precision Processing, AT&F Advanced Metals, and AT&F Wisconsin. Our multiple facilities have over 600,000 square feet of manufacturing space and over 200 Team Members. AT&F is in its fourth generation of family leadership. While the values of the organization are like those found in family-run firms, AT&F is also forward thinking, sophisticated, and professional. Who We Want on Our Team? We offer competitive salaries and a full range of benefits for our Team Members, including health, dental, vision, life insurance, 401(k), tuition reimbursement, paid time off, holidays, AT&F clothing program, a Wellness Program, Military Veterans Resource Group, ESL Classes, and opportunity for career growth. However, our Team is motivated by more. Teamwork, Purposeful Work, and Getting Better at our Craft. Our growth is continuing with current and new customers. Do you want to be a part of a Fabricating Team that is preforming challenging, purposeful work? Our team lives by our Core Values: Work Hard, Do What You Say You'll Do, Take Care of Each Other, Quietly Lead, Invest, and Run To It. Ask us about these Core Values to find out if this will be the place you are looking for. The Goals and Challenges of this Role: Responsible for conducting quality weld inspections using various methods in accordance with industry standards and contract specific requirements. Provide factual, comprehensive data and draft reports for customers addressing NDT inspection criteria completely. Coordination with Project Management, Production, Customers and Third Party Surveyors as required. Preparation of Quality Plans, Inspection and Test Reports. Review and Certification of Final Documentation for Customers. Demonstrated proficiency performance as a minimum NDT Level I / II, and minimum 600 logged hours in any one (1) of the following areas: Visual Dye Penetrant (combination of Type I and Type II) Magnetic Particle (combination of Dry Method & Wet Method) Ultrasonic (Thickness & Shearwave) Set up and perform NDT test procedures. Interpret specifications relative to NDT testing and acceptance/rejection criteria. Be familiar with the scope and limitations of the methods for which qualified, and exercise assigned responsibility for OJT and guidance of trainees. Be able to prepare written instructions and to organize and report the results of examinations. Work independently and support team members Perform other job related tasks as needed What You Should Bring to this Role: Must be qualified and certified to ASNT-TC-1A in one or more of the following NDT Methods that will be utilized: Visual Examination (VT) Liquid Penetrant (PT) Magnetic Particle (MT) Ultrasonic Testing (UT) Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience. Current AWS CWI - plus Experience in the inspection of metal fabrications, pressure vessels, piping, tanks, or gas systems HS diploma or equivalent Pay Range: $26.00 - $34.00 per hour. This range reflects the minimum and maximum for the role. Starting pay depends on your skills, experience, and ability to perform the job.

Acuren is seeking a Rope Access I for operations in Lima, OH. THIS WILL BE AN EMBEDDED FULL-TIME POSITION. The Rope Access Tech I is an entry-level position, responsible for carrying out duties and responsibilities in a safe and timely manner as assigned under the supervision of higher-level rope access technicians. Responsibilities Perform specific job functions per the direction of the Rope Access Supervisor or a Level II/III Rope Access Technician Inspect and validate rope access equipment and systems for safety and compliance prior to use. Assist in preparing and setting up rope access equipment and systems as directed by the Lead RAT Identify potential worksite hazards and promptly report unsafe conditions to the Rope Access Level III/ Supervisor Record results of inspections as directed by the Lead RAT Safely ascend, descend, and maneuver on ropes using standard rope access techniques. Assist in basic rescue operations under the supervision of higher-level rope access technicians Maintain current certifications and training records in compliance with IRATA or SPRAT requirements Assist other technicians as required Other work duties as assigned. Requirements KNOWLEDGE, SKILLS & ABILITIES: Physical capability to perform strenuous work at heights Ability to follow directions and procedures Demonstrates a strong willingness to learn and grow, with a collaborative, team-oriented mindset Physically and mentally fit with a strong mechanical aptitude Strong awareness of safety and quality standards Strong work ethic and dependable Excellent communication and teamwork skills Ability to regularly work overtime Adaptable to changing schedules with willingness to travel regularly, including last minute and overnight travel Must have valid driver's license Must be 18 years of age or older MUST BE ABLE TO PASS HAIR FOLLICLE/ALCOHOL AND BACKGROUND SCREENS. EDUCATION: IRATA/SPRAT Level 1 Certification required including proficiency in theoretical knowledge, equipment and rigging, maneuvers, climbing and rescue/hauling High School Diploma or equivalent Some college preferred Benefits Competitive Salary Medical, dental, and supplemental insurance 401K Plan Paid Holidays Paid Time Off Working Conditions Extreme cold and extreme heat environmental conditions, in and near hazards to include proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places in excess of 100 feet, exposure to high heat, extreme cold, or exposure to chemicals, in conditions that affect the respiratory system or the skin such as fumes, odors, dust, mists, gases, or poor ventilation. Travel may be required. PHYSICAL JOB REQUIREMENTS & DEMANDS: Ability to withstand physically demanding tasks in various environmental conditions including extreme temperatures, heights, and limited visibility for extended periods of time Navigate industrial environments using rope systems and climbing equipment, requiring strong lower body mobility, balance and mental strength for continuous concentration Meet occupational vision and hearing requirements to safely perform essential job functions Maintain physical stamina for prolonged standing, bending, and maneuvering in confined spaces Physical endurance such as climbing, balancing, stooping, bending, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting regularly. Ability to lift and carry up to 30 pounds regularly, 60+ pounds on occasion Frequent mobility is required in close quarters, crawl spaces, shafts, small, enclosed rooms, line pipes, and other areas that could cause claustrophobia Withstand loud noise and able to work long workdays of up to 16 consecutive hours in one day. Physical stamina for extended periods of rope suspension Manual dexterity for technical rope work and tool handling, with regular stress to hand and fingers Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability , Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-BE1

Industrial Painter - 2nd shift 2nd Shift: 3:30pm to Midnight Starting Rate: $22 to $24 hourly Avon, OH area manufacturer to the aerospace industry is hiring a 2nd shift Industrial Painter. This Industrial Painter must have at least 1+ years experience within an industrial painting setting within manufacturing. INDUSTRIAL PAINTER SUMMARY: Responsible for the operation of manually operated hand painting equipment as well as automatic paint line for application of final finish to prescribed specifications. INDUSTRIAL PAINTER ESSENTIAL FUNCTIONS: 1. Prepare surfaces to be painted as required by work instructions, using spray guns, rollers, and brushes. 2. Ensures the use of appropriate technical references and tools in performing paint duties. 3. Perform cleaning and maintenance of all used painting equipment. Keep work areas clean and organized daily. 4. Work safely to prevent on-the-job injuries by wearing proper safety equipment (e.g. - Powered Air Purifying Respirator (PAPR)) and following procedures. Proactively identify and take corrective action to eliminate unsafe behaviors and conditions. 5. Maintain established production rates at expected quality levels Education & Experience: • High School Diploma or GED required. • Minimum 1-2 years of related painting and coating applications and/or demonstrated ability. • U.S. Citizenship/Permanent Resident is required for this position.

2nd shift NDT Technician- CMM Title: NDT Technician (Visual Inspector) Status: Hourly Shift: 2nd, 2:30p-10:30p Reporting Relationship: Reports directly to Area Manager, NDT Education: A high school diploma or equivalent is preferred, and may be substituted by experience. Personal Characteristics: Able to meet deadlines and be accountable for quality/ quantity. Able to work flexible hours with a history of dependability as demonstrated with strong attendance record. Comfortable using a team approach to problem solving. Have strong sense of urgency. Individual must be a motivated self-starter with the ability to work independently. Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers and supervisors. Work Experience: Minimum of 1 year experience in visual or grain inspection in IGT or Aircraft Investment Castings. Must be able to read and interpret customer specifications, and computer literate. Principal Area of Responsibility: The Visual Inspector must be able to interpret specifications issued by the Quality Control Department in fulfilling manufacturing's inspection operations. Specific Duties: Perform visual inspection of all castings and determine the acceptability to specifications, re-routing unacceptable parts back to the appropriate finishing operation when needed or classifies and holds rejected parts for review. Meet the specific requirements of the efficiency standard as established by Manufacturing. Record, on a daily basis, all work performed and the correct distribution of the work time by operational code and operating department. Keeps work area clean, following all safety rules. Perform other duties as designated by the supervisor. Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers and supervisors. Any and all additional responsibilities as required or assigned. Physical and Mental Demands: Incumbent must physically and mentally perform the job demands as listed below. The ability to handle high stress associated with high activity with tight deadlines. Pass visual acuity examination

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position is responsible for inspecting tacked, welded, painted, galvanized and manufactured parts and components for quality per the Company's quality control processes and procedures. Preform MT 1 inspection (dry powder) on weldments. Essential Duties: * Communicates clearly and concisely via email, text, or verbally * Ensures all inspections comply with Sabre's quality standards * Conducts in process and final visual weld and dimensional inspections in accordance with AWS D1.1 * Preforms MT 1 inspections (dry powder) in accordance to Sabre's quality requirements * Verifies and maintains inspection and test status of product during all stages of manufacturing * Verifies rework and repair of nonconforming products * Initiates requests for corrective action on observed conditions which do not conform to quality system requirements * Prepares, reviews and maintains Quality records appropriate to inspection and test activities to assure legibility, completeness, and correctness of the information * Visually inspects manufactured parts to ensure they are manufactured per the drawings/specifications * Ensures that customer requirements are determined and met or exceeded * Contributes to a safe working environment by being responsible for quality, safety, organization, and cleanliness in area of operation * Contributes to team effort by communicating and working well with others, as well as accomplishing related tasks as needed * Maintains a professional demeanor at all times * Performs other duties as assigned * Regular and on-time attendance * Work in your shift as scheduled * Getting along with coworkers Position Requirements: * Education: 20 hours of MT 1 classroom training per STN-TC-1A is required. Must be able to meet the AWS D1.1 requirements of a visual weld inspector. High school diploma or equivalent. Two-year Associate/Technical degree preferred. * Experience: Recent experience working with Quality Control in a welding/manufacturing environment preferred. Must be able to read blueprints (engineering drawings). Must be able to read a tape measure to 1/16 of an inch. * Effectively read and interpret blueprints and weld symbols * Must possess strong English verbal and written communication skills * Must be detail oriented and have the ability to multi-task in a fast paced, team environment * Must possess the ability to read and interpret documents such as safety and quality manuals, blueprints, and design drawings * Ability to efficiently input and retrieve information from PC based information systems * Ability to effectively use measuring devices such as a tape measure, combination squares, levels, etc. to accurately verify all parts to print * Regular and timely attendance is required Physical Requirements: * Must be able to perform work functions while standing for long periods of time. * Must be able to lift, push pry and drag heavy materials up to 50 lbs. * Must be able to reach, grasp, bend, stoop, crawl under or climb over to inspect product * Must be able to pass the Jaeger 2 test and distinguish between red and yellow * Must be able to work in both indoor and outdoor environments, and in all types of weather conditions such as rain, snow, heat, and cold At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

Job Description This position exists to provide non-destructive testing inspections supporting both our lab and field operations We provide materials testing for the aerospace, defense, amusement, automotive, nuclear, and medical industries and more. As a Level 2 Technician, this position will set up equipment and complete control checks; perform non-destructive tests; evaluate inspection results for acceptance or rejection determinations according to applicable codes, standards, and specifications; and record results. Level 2 Technicians are thoroughly familiar with the scope and limitations of the method of NDT being used and are responsible for on-the-job training and guidance of trainee and Level 1 Technicians. Essential Responsibilities: Set up and perform daily process control checks on nondestructive testing equipment. Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection. Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations. Apply testing criteria in accordance with applicable specifications or standards and evaluate results. Organize and report test results. Maintain a safe, secure, and healthy environment by adhering to company safety standards and practices as well as legal regulations. Alert others as appropriate regarding potential hazards or concerns. Utilize proper protective equipment. Perform specialized inspections. May instruct and monitor others. Additional duties as assigned by management. Education and Experience: High school diploma or equivalent. Certified to NAS 410 or SNT-TC-1A Demonstrated ability to effectively perform assigned NDT tasks and interpret inspection results. Knowledge of NDT equipment. Additional certifications a plus. Desired Competencies: Strong work ethic. Dependable. Exceptional safety and quality awareness. Mechanical aptitude. Strong attention to detail and accuracy. Strong teamwork and collaboration skills. Ability to follow directions and procedures. Adaptable to changing schedules. Essential Qualifications / Physical Demands / Work Environment: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customer or employees of an organization. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Word; Microsoft Excel; Microsoft Outlook; and internet browsers and should be capable of learning to use our proprietary order processing software. Physical Demands: While performing the duties of this job, the employee is regularly required to stand, walk, use hands, reach with hands and arms, and talk/hear as well as regularly move, carry, or lift objects in excess of 50 pounds. The employee is frequently required to sit, climb, or balance and is occasionally required to stoop, kneel, crouch, or crawl. Vision Requirements: This position requires close vision (clear vision at 20 inches or less), ability to adjust focus (ability adjust the eye to bring an object into sharp focus), and ability to see color. Work Environment: While performing the duties of this job, the employee is frequently exposed to wet conditions (non-weather) and is occasionally exposed to work near moving mechanical parts; work in high, precarious places, fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; risk of electrical shock; and risk of radiation. The noise level in the work environment is usually moderate.