Injection Molder

Top Injection Molder Skills

Below we've compiled a list of the most important skills for an Injection Molder. We ranked the top skills based on the percentage of Injection Molder resumes they appeared on. For example, 29.1% of Injection Molder resumes contained Car Parts as a skill. Let's find out what skills an Injection Molder actually needs in order to be successful in the workplace.

The six most common skills found on Injection Molder resumes in 2020. Read below to see the full list.

1. Car Parts

high Demand
Here's how Car Parts is used in Injection Molder jobs:
  • Pulled molded car parts off the assembly, added security clips, then inspected and boxed parts.
  • Made/molded rubber car parts that prevents vibration and imbalance of vehicles.
  • Inspected car parts to make sure they were not damaged.
  • Put some car parts together.

Show More

2. Plastic Parts

high Demand
Here's how Plastic Parts is used in Injection Molder jobs:
  • Mold and cast metal or thermoplastic parts.
  • Operated injection molds Produced various plastic parts used in automobile assembly
  • Operate metal and plastic molding and casting machines.Mold and cast metal or thermoplastic parts.

Show More

3. Final Product

high Demand
Here's how Final Product is used in Injection Molder jobs:
  • Operated injection molding machines, inspecting final product, worked with chemicals and tools used while injection-molding.

Show More

4. Set-Up

high Demand
Here's how Set-Up is used in Injection Molder jobs:
  • Adjusted and corrected machine set-ups to reduce thicknesses, reshaped products and eliminated product defects.
  • Verify correct set-up of molds, presses and auxiliary equipment before machine start up.
  • Purchased equipment, parts, and supplies, and set-up an inventory system.
  • Produced wax part for set-up department for the process of making foundry products
  • Mixed ink, matched colors, set-up and maintain molding machines for lighting fixtures.
  • Loaded in pre-established set-up guide and produced visually acceptable first piece.

Show More

5. Assembly Line

high Demand
Here's how Assembly Line is used in Injection Molder jobs:
  • Utilized production equipment to mold plastics on assembly line process
  • Remove plastic parts off assembly line inspect them make sure there not damaged then pack and label them.
  • Work on assembly line to produce flexible polyurethane foam material.
  • Use of grinders, sorting and assembly line production.
  • Produce and assemble parts for the assembly line.
  • Worked on assembly lines putting material on parts.
  • Clean and maintain the assembly line appropriately.
  • Take care of assembly line operators.
  • Packed carseat shells to go to assembly lines.
  • Performed Heavy and light sheet metal press operation and set up Quality assembly line production High capacityfork liftoperation

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. ISO

high Demand
Here's how ISO is used in Injection Molder jobs:
  • Performed within certain parameters accounted for getting new products in production documented processes for future reference served as a back up supervisor
  • Account Supervisor/Customer Service Manager - Detroit area
  • Worked with the Quality department to resolve SPC part dimension and cosmetic issues following ISO 9000 and QS 9000 standards.
  • Constructed an ISO class 7, class 10,000 clean room molding facility for R&D and future manufacturing.
  • Implemented and operated under ISO-9000, used SIX-SIGMA methods to eliminate defectives for injection molded medical components.
  • Monitored scientifically develop processes to ensure part consistency and integrity following ISO and QS 9000 standards.
  • Established company's ISO 9000 initiative, including documentation, procedures, and training.
  • Managed 6 production supervisors and over 150 hourly associates in a union environment.
  • Trained to work manufactured parts as directed under the leadership of shift supervisor.
  • Worked with Supervisors, Machine Operators, Material Handlers & Q.C.
  • Pull parts from bin; report any shortages to Supervisor.
  • Helped production supervisor direct labor and helped with personnel issues.
  • Filled in as production supervisor on weekends and holidays.
  • Created and implemented an ISO/QS-9000 compliant Quality System.
  • Conducted Procedure, Safety, and ISO Training.
  • Performed and reported Internal ISO9001 QMS based Audits.
  • Participated on team implementation of ISO 9001.
  • Key committee member of ISO 9000 registration.
  • Maintain a clean and orderly workplace Notify set up technician or supervisor of non conforming conditions.
  • Tool Room Supervisor Responsible for the machine and tooling requirements throughout the facility.

Show More

7. Machine Operation

high Demand
Here's how Machine Operation is used in Injection Molder jobs:
  • Observe machine operations to ensure quality and conformity of filled or packaged products to standards.
  • Machine Operation: Injection Mold/Packaging/Electrical Assembly; Manual Assembly, Quality Control, Production, Inventory

Show More

8. Excess Material

high Demand
Here's how Excess Material is used in Injection Molder jobs:
  • Operate machine, pull parts from ma cine and trim excess material from the parts.
  • Trimmed flash and excess material off of finished product and inspected for damage
  • Cleaned up any excess material on parts.
  • Trimmed excess material from parts.
  • Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
  • Trimmed excess material and residue from parts utilizing hand tolls.
  • Cut off excess material.Grind scraps into powder.

Show More

9. Quality Standards

high Demand
Here's how Quality Standards is used in Injection Molder jobs:
  • Instituted a Statistical Process Control program to meet ever increasing quality standards.
  • Led a team of managers in multiple locations during the implementation of the quality standards.
  • Bench inspection and cleaning of all parts produced ensuring quality standards are being met.
  • Make appropriate quality control checks to insure compliance with Company Quality Standards.

Show More

10. Hand Tools

high Demand
Here's how Hand Tools is used in Injection Molder jobs:
  • Installed dies on machines according to work order specifications, using clamps, bolts and hand tools.
  • Work with multiple hand tools with multiple machines and materials.
  • Removed product from molds with the appropriate hand tools.
  • Fabricate parts using hand tools where necessary.

Show More

11. Inspect Parts

high Demand
Here's how Inspect Parts is used in Injection Molder jobs:
  • Operate impact Pres's, automated sizing machines follow procedures for each machine inspect parts for damages/ contamination.
  • Inspect parts to ensure that they meet specific engineering instructions.
  • Operate equipment, inspect parts, and make necessary adjustments.
  • Assemble, repack and inspect parts
  • Inspect parts, make sure they are good as the blue print says.

Show More

12. Quality Checks

high Demand
Here's how Quality Checks is used in Injection Molder jobs:
  • Perform mold and color changes, person quality checks using calipers, micrometers, force gauge and insertion on terminals.
  • Carried out sample piece quality checks as per ISO 9001 requirements using various test equipment/gauges.
  • Complete necessary documentation; process checks, quality checks, production reporting etc.
  • Packed and prepared products for shipment Completed quality checks of products Replaced tape for tappers and baggers Lift and stacked boxes

Show More

13. Clean Rooms

high Demand

14. Troubleshoot

high Demand
Here's how Troubleshoot is used in Injection Molder jobs:
  • Performed troubleshooting of injection molding machines and conducted preventative maintenance.
  • Troubleshooted and performed maintenance on mold injection machine.
  • Monitored, adjusted and conducted a wide range of complex troubleshooting techniques with the molding process issues problems on Part's.
  • Color changed injection and compression molding machines, inspected and measured products for proper specifications, and troubleshooted machine problems.
  • Operate an injection molder.-Inspect parts for defects and check overall quality of the parts.-Troubleshoot problems with equipment.
  • Assisted in troubleshooting molding problems, oversaw material mixing and delivery to machines.
  • Assisted in mold changing, processing, and troubleshooting.
  • Supported the Process Technicians with troubleshooting and processing issues.
  • schedule production, train employees, manage department, set up, process and troubleshoot plastic injection machines.
  • Particiapted in mold design reviews as well as troubleshooting tools when issues would arise in production.

Show More

15. Customer Service

average Demand
Here's how Customer Service is used in Injection Molder jobs:
  • Operate rubber injection presses, Backup production planner, Backup shipping/receiving/customer service.
  • Authored procedures and work instructions for purchasing, customer service, shipping and information systems.
  • Implemented changes in customer service in order to improve the complaint response process.
  • Ensured highest level of customer service, which resulted in increased productivity.

Show More

16. Product Quality

average Demand

17. Process Control

average Demand
Here's how Process Control is used in Injection Molder jobs:
  • Established additional Process Control to decreased machine down-time and increase utilization.
  • Completed statistical process control charts and related quality documentation.
  • Ensured quality through statistical process control.
  • Increased productivity 12% through greater process control and employee utilization.
  • Background includes use of PC based software for tooling record keeping and process control history.

Show More

18. SPC

average Demand
Here's how SPC is used in Injection Molder jobs:
  • Researched and initiated new SPC software (QS Infinity) data collection system.
  • Implemented SPC program and trained Lead Personnel and Inspectors in its use.
  • Performed capability studies to ensure SPC.
  • Used SPC data to baseline projects.
  • Performed capability studies to ensure SPC Data entry and filing of in-process and measurement studies.

Show More

19. Cycle Times

average Demand
Here's how Cycle Times is used in Injection Molder jobs:
  • Work closely with production to achieve the best molding process and optimal cycle times for the highest quality parts.

Show More

20. Customer Requirements

average Demand
Here's how Customer Requirements is used in Injection Molder jobs:
  • Coordinated manufacturing, construction, installation and maintenance projects for engineering team to complete per customer requirements.
  • Reviewed all customer requirements and documents and explained to the Upper Management Team.
  • Trimmed, inspected and packed parts to meet customer requirements.
  • Performed part samplings to meet customer requirements.

Show More

21. Part Numbers

average Demand
Here's how Part Numbers is used in Injection Molder jobs:
  • Issue the correct part numbers and quantities to the correct work order numbers in the computer system.

Show More

22. Temp

average Demand
Here's how Temp is used in Injection Molder jobs:
  • Read specifications to determine setup and prescribed temperature and time settings.
  • Checked parts for defects, maintained clean work area, checked machines for proper temperatures and sets for each part.
  • Check my temperature make sure my water is on check my resin fill out my paper work.
  • Adjusted machine controls to regulate molding temperature, volume of plastic and molding pressure and time.
  • Observed gauges to ensure that specified molding temperature and pressure were maintained.
  • Set machine controls, regulating molding temperature, molding pressure and time.
  • Train associates who are new to the department including temporary employees.
  • Reason for leaving: Employed through Kelly Services Temporary Agency.
  • Fill machine hoppers Regulate molding temperature, volume, pressure, and time.
  • Reason for leaving: Employed through Hamilton Ryker- Temporary Agency.
  • Cut and shaped molds [ ] Central 2000 Temp Agency, Johnston R.I
  • Set machines controls,regulating molding tempeture,volume of plastics and record operational data

Show More

23. Sigma

average Demand

24. Different Types

average Demand
Here's how Different Types is used in Injection Molder jobs:
  • Monitor multi - cavity thermoplastic machines that produce different types of molded parts on fully automatic or single cycle operation.
  • Trained in the use in many different types of equipment.

Show More

25. Surface Defects

average Demand
Here's how Surface Defects is used in Injection Molder jobs:
  • Examined molded product for surface defects such as cracks and dents.
  • Operated forklift Inspected products for surface defects and flaws.
  • Pour product into mold.Remove cured product from mold.Inspect products for surface defects and flaws.

Show More

26. Cast Parts

average Demand
Here's how Cast Parts is used in Injection Molder jobs:
  • Tended plastic molding, casting, or core making machines to mold or cast parts or products.
  • Pulled levers to close dies and inject plastic into dies to cast parts.

Show More

27. CNC

average Demand
Here's how CNC is used in Injection Molder jobs:
  • Helped assemble and disassemble injection molds, program CNC machines, and other general helper duties.
  • Designed injection mold tooling; extensive CNC programming and machining.

Show More

28. Automotive Parts

average Demand
Here's how Automotive Parts is used in Injection Molder jobs:
  • Operated various injection molding machinery in the production of finished automotive parts.
  • Operate an injection molding machine for automotive parts
  • Validated BMW automotive parts for quality (flash, short shots, color, quantity, etc.

Show More

29. Oversaw

average Demand

30. Mold Changes

low Demand

31. Process Improvement

low Demand
Here's how Process Improvement is used in Injection Molder jobs:
  • Improved plant metrics through tooling and process improvement focus along with increasing cross-functional support and improving operator involvement.
  • Identified inefficiencies and made recommendations for process improvements.
  • Design and develop new molds, molding processes, techniques, process improvements and cost reductions.
  • Initiate tooling changes and process improvements.
  • Maintained existing margins in a rising materials environment through implementation of process improvements and automation.
  • Initiated Process Improvement Teams reducing non-conformances 350%.

Show More

32. Nissan

low Demand
Here's how Nissan is used in Injection Molder jobs:
  • Assembled car parts for Nissan.

Show More

33. Direct Reports

low Demand
Here's how Direct Reports is used in Injection Molder jobs:
  • Managed 12 direct reports including the training and development.

Show More

34. Company Standards

low Demand

35. Chrysler

low Demand
Here's how Chrysler is used in Injection Molder jobs:
  • Account Manager: Developed and expanded new and existing accounts within Chrysler Corporation.
  • Mold plastic /install on doors for Chrysler

Show More

36. Raw Materials

low Demand
Here's how Raw Materials is used in Injection Molder jobs:
  • Examined, inspected and measured raw materials and finished products to verify conformance to specifications.
  • Inventory control management of all raw materials, WIP and finished goods for $15 million operation.
  • Mixed and dyed raw materials per specifications.

Show More

37. Honda

low Demand
Here's how Honda is used in Injection Molder jobs:
  • Make different parts for honda and nissan cars

Show More

38. Osha

low Demand
Here's how Osha is used in Injection Molder jobs:
  • Update OSHA Logs, Project management as needed.
  • Maintained records of OSHA required training of employees.

Show More

39. FDA

low Demand
Here's how FDA is used in Injection Molder jobs:
  • Performed the GMP and compliance audits at six manufacturing plants that ensured compliance the Interstate Milk Shippers Association and FDA requirements.
  • Produced Medical Devices and Packages to FDA's rigorous GMP standards.
  • Control plans included GMPs, and procedures that complied with AIB and FDA standards.

Show More

40. DOE

low Demand

41. Secondary Operations

low Demand
Here's how Secondary Operations is used in Injection Molder jobs:
  • Perform secondary operations such as sonic welding, hot stamping and broaching.

Show More

42. Production Requirements

low Demand
Here's how Production Requirements is used in Injection Molder jobs:
  • Scheduled labor per production requirements and coordinated mold changes.
  • Assigned a crew of 15 machine and assembly operators to complete daily task per production requirements.

Show More

43. Hard Worker

low Demand

44. Medical Parts

low Demand
Here's how Medical Parts is used in Injection Molder jobs:
  • Design plastic injection molds for dot matrix printers, disk drives, CAD design plotters, medical parts.
  • Manufacture and produce medical parts.

Show More

45. Eye Coordination

low Demand

46. Customer Orders

low Demand
Here's how Customer Orders is used in Injection Molder jobs:
  • Review bills and lading for incoming merchandise and customer orders in order to plan work activities.
  • Inspected and packed parts as per customer orders.
  • Injected plastic into molds Built custom molds for customer orders

Show More

47. GM

low Demand
Here's how GM is used in Injection Molder jobs:
  • Developed and implemented Lean Six Sigma initiatives to improve production rate.
  • Mix thermoplastic materials and coloring pigments in mixing machine, according to formula.
  • Led team that developed and implemented the GMP guidelines for the corporation.
  • Executed Gage R&R and Six Sigma Studies
  • Account Executive: Responsible for Sales and Program Management for GM, IAC and several other tier 1 companies.
  • Mix catalysts and coloring pigments.Operate mixing machine.Repair and maintain machines.
  • Participate in staff meetings regarding SOPs and GMPs.

Show More

48. Excess Plastic

low Demand
Here's how Excess Plastic is used in Injection Molder jobs:
  • Operated plastic injection molding machines and trimmed excess plastic from parts.
  • Torched, scraped, and swiveled excess plastic off.

Show More

49. Plastic Powders

low Demand
Here's how Plastic Powders is used in Injection Molder jobs:
  • dump premixed plastic powders or pellets into hopper and start machine.

Show More

50. Continuous Operation

low Demand
Here's how Continuous Operation is used in Injection Molder jobs:
  • Observed continuous operation of machines.
  • Observe continuous operation of machines to ensure that products meet specifications and to detect malfunctions, making adjustments as necessary.

Show More

20 Most Common Skill for an Injection Molder

Car Parts35.3%
Plastic Parts21.8%
Final Product13.6%
Set-Up2.8%
Assembly Line2.5%
ISO2.5%
Machine Operation2.1%
Excess Material1.9%

Typical Skill-Sets Required For An Injection Molder

RankSkillPercentage of ResumesPercentage
1
1
Car Parts
Car Parts
29.1%
29.1%
2
2
Plastic Parts
Plastic Parts
18%
18%
3
3
Final Product
Final Product
11.2%
11.2%
4
4
Set-Up
Set-Up
2.3%
2.3%
5
5
Assembly Line
Assembly Line
2.1%
2.1%
6
6
ISO
ISO
2.1%
2.1%
7
7
Machine Operation
Machine Operation
1.8%
1.8%
8
8
Excess Material
Excess Material
1.6%
1.6%
9
9
Quality Standards
Quality Standards
1.6%
1.6%
10
10
Hand Tools
Hand Tools
1.5%
1.5%
11
11
Inspect Parts
Inspect Parts
1.5%
1.5%
12
12
Quality Checks
Quality Checks
1.4%
1.4%
13
13
Clean Rooms
Clean Rooms
1.4%
1.4%
14
14
Troubleshoot
Troubleshoot
1.2%
1.2%
15
15
Customer Service
Customer Service
1.2%
1.2%
16
16
Product Quality
Product Quality
1%
1%
17
17
Process Control
Process Control
0.9%
0.9%
18
18
SPC
SPC
0.9%
0.9%
19
19
Cycle Times
Cycle Times
0.9%
0.9%
20
20
Customer Requirements
Customer Requirements
0.9%
0.9%
21
21
Part Numbers
Part Numbers
0.9%
0.9%
22
22
Temp
Temp
0.8%
0.8%
23
23
Sigma
Sigma
0.8%
0.8%
24
24
Different Types
Different Types
0.8%
0.8%
25
25
Surface Defects
Surface Defects
0.8%
0.8%
26
26
Cast Parts
Cast Parts
0.8%
0.8%
27
27
CNC
CNC
0.7%
0.7%
28
28
Automotive Parts
Automotive Parts
0.7%
0.7%
29
29
Oversaw
Oversaw
0.6%
0.6%
30
30
Mold Changes
Mold Changes
0.6%
0.6%
31
31
Process Improvement
Process Improvement
0.6%
0.6%
32
32
Nissan
Nissan
0.6%
0.6%
33
33
Direct Reports
Direct Reports
0.6%
0.6%
34
34
Company Standards
Company Standards
0.6%
0.6%
35
35
Chrysler
Chrysler
0.6%
0.6%
36
36
Raw Materials
Raw Materials
0.6%
0.6%
37
37
Honda
Honda
0.6%
0.6%
38
38
Osha
Osha
0.5%
0.5%
39
39
FDA
FDA
0.5%
0.5%
40
40
DOE
DOE
0.5%
0.5%
41
41
Secondary Operations
Secondary Operations
0.5%
0.5%
42
42
Production Requirements
Production Requirements
0.5%
0.5%
43
43
Hard Worker
Hard Worker
0.5%
0.5%
44
44
Medical Parts
Medical Parts
0.5%
0.5%
45
45
Eye Coordination
Eye Coordination
0.5%
0.5%
46
46
Customer Orders
Customer Orders
0.5%
0.5%
47
47
GM
GM
0.4%
0.4%
48
48
Excess Plastic
Excess Plastic
0.4%
0.4%
49
49
Plastic Powders
Plastic Powders
0.4%
0.4%
50
50
Continuous Operation
Continuous Operation
0.4%
0.4%

210 Injection Molder Jobs

Where do you want to work?