Inline Plastics jobs in Salt Lake City, UT

Hunt Electric, Inc. is looking for a full-time experienced and self-motivated Heavy Equipment Operator to build roadway projects, street lighting, underground utilities, and electrical and communication systems. A qualified individual will also be responsible for setting vaults and performing light concrete work, including pole foundations. Job Requirements: Experience with operation of excavators, loaders, and digger derricks. Requires working with light, medium and heavy tools to install underground conduit, boxes, vaults, rebar and pour concrete Experience with excavation, civil construction, and underground utilities Experience working around underground utilities Experience in digging trenches and working around underground utilities Ability to work well within a team, helping with all aspects of underground utilities and excavation. Ability to use basic construction equipment and tools including shovels, sledgehammer, and concrete tools. Experience in laying and gluing conduit. Ability to be able to perform a variety of tasks including manual labor. Must have a valid driver's license for a minimum of one year and a clean driving record Must be 21 years or older. Actively contributes to a positive team environment. Demonstrate dependability with regular attendance and compliance with scheduled work hours. Other duties or locations as assigned by Manager Minimum Qualifications: Class A CDL with no restrictions preferred. Experience with installation of electrical or dry utilities. Concrete experience a plus. As a full-time Heavy Equipment Operator, you would also be eligible for an excellent benefits package, including medical, dental, life insurance, short-term and long-term disability, a 401(k) plan, and paid personal time (PTO). About Hunt Electric Hunt Electric, Inc. is a full-service electrical, technology, and infrastructure contractor with wide-reaching services available in a variety of markets. Headquartered in Salt Lake City, we have additional branch locations in Denver, CO, St. George, UT, and Boise, ID. Since 1986, we have experienced tremendous growth with plans to continue expanding our services and markets served. If you are looking for a merit-based company where you can improve your skills, grow your career, and enjoy your work, look no further and apply today! Work Schedule This is a full-time position with a typical working schedule of Monday - Thurs 7:00am - 4:30pm and Friday 7:00am - 2:00pm.

Hunt Electric, Inc is seeking a qualified candidate to fill an Apprentice Lineman position in our Transmission and Distribution Division. The qualified candidate will be responsible for the construction, maintenance, and repair of electrical transmission, distribution, and substation systems. PLEASE NOTE: THIS IS NOT A GROUNDSMAN POSITION. IF YOU ARE NOT ENROLLED/ATTENDED A CERTIFIED LINEMAN APPRENTICESHIP SCHOOL, WITH 3 to 4 YEARS EXPERIENCE , PLEASE WAIT TO APPLY WHEN A GROUNDSMAN POSITION OPENS UP. YOUR APPLICATION WILL BE REJECTED. Major Duties: Highly motivated individual with the ability to work productively in a team atmosphere. Ability to interpret electrical plans and prints, stand for extended periods of time, use both hands, arms, and legs, stoop and bend, and lift 100 pounds. Attend IPSA Apprentice Schooling, track and turn in monthly on the job and Schooling Hours Demonstrate skill in pole and tower climbing, URD installations, using hotline tools and working in aerial devices. Provide effective and meaningful on-the-job training of apprentices and other crew members in maintenance and construction of power lines. Able to identify primary and secondary voltage on a circuit, familiarity with induced voltage, and understanding of proper grounding procedures. Demonstrate the knowledge of operating equipment safely and maintaining company equipment and tools in good working order. Capable of performing work in a safe, timely and efficient manner. Demonstrate skill troubleshooting trouble in primary and secondary systems. Experience effectively conducting a pre-job or tailboard briefing. Other duties and locations as assigned by manager. Minimum Qualifications: High school diploma or equivalent. You must be 21 years or older to drive with your CDL over state lines. Enrolled/Attended a certified Journeyman Lineman Apprenticeship Program (copy of certificated required). Must possess a valid Commercial Driver's License (Class “A”) with ability to meet all DOT requirements. Must be CPR and First Aid certified or possess the ability to obtain such certification within 90 days of employment. Must be willing to Travel for extended periods of time. Salary and Benefits: The salary will be competitive and commensurate with relevant experience as well as the responsibilities of the position. The position is eligible for an excellent benefits package, including medical, dental, life insurance, short-term and long‐ term disability, 401(k) plan, and paid personal time. Company Background: We are a full-service electrical, technology and infrastructure contractor with wide-reaching services available to all types of markets. With licenses in eight states and offices in Salt Lake City and Denver, we have continued to lead the industry across the Intermountain West since 1986. Our turn-key services range from design-build engineering to construction and maintenance. With eight in-house divisions, an on-site prefabrication department, in-house licensed engineers, a fully trained and specialized workforce and 24-hour on-call service, Hunt Electric ensures our clients' projects are successful from start to finish - and beyond.

Make a meaningful difference: At Thatcher Chemical facilities across the nation, our manufacturing teams create the essential chemistries, processes, and solutions that support clean water, safe environments, reliable infrastructure, and critical industries. From production and quality to logistics and distribution, your precision, dedication, and commitment to continuous improvement help transform raw materials and innovative science into real-world solutions. Your purpose-driven work plays a vital role in protecting public health, supporting communities, and shaping a safer, more sustainable future. Thatcher Company is seeking an Engineering Maintenance Manager for its Salt Lake City, Utah, plant. What You'll Do * Lead and supervise maintenance staff, planners, and contractors. * Manage maintenance schedules, priorities, and work orders through the CMMS system. * Own and drive preventive (PM) and predictive (PdM) maintenance and reliability programs. * Troubleshoot mechanical, electrical, and instrumentation systems. * Ensure compliance with OSHA, PSM, and environmental regulations. * Partner with operations and engineering to reduce downtime and improve productivity. * Oversee spare parts inventory and maintenance planning. * Conduct root-cause failure analyses (RCFA) and implement long-term corrective actions. * Support team training, development, and performance. * Assist with reliability improvements and capital project execution. What We're Looking For Required: * 6-8 years of maintenance or reliability experience in manufacturing or chemical operations. * Prior leadership or supervisory experience. * Strong mechanical, electrical, and process systems knowledge. * Experience with CMMS, maintenance planning, and work order systems. * Working knowledge of OSHA, PSM, and environmental compliance. * Proven troubleshooting, analytical, and organizational skills. Preferred: * Bachelor's degree in Mechanical, Electrical, or Industrial Engineering (or related experience). * Lean or Six Sigma experience.

Make a meaningful difference: At Thatcher Chemical facilities across the nation, our manufacturing teams create the essential chemistries, processes, and solutions that support clean water, safe environments, reliable infrastructure, and critical industries. From production and quality to logistics and distribution, your precision, dedication, and commitment to continuous improvement help transform raw materials and innovative science into real-world solutions. Your purpose-driven work plays a vital role in protecting public health, supporting communities, and shaping a safer, more sustainable future. Thatcher is hiring a Senior Environmental, Health & Safety Specialist Salary: $80-$100K Major Accountabilities * Supports the department in assuring company compliance with state and federal environmental laws dealing with hazardous waste, water, and air, including but not limited to: * OSHA Process Safety Management (PSM). * EPA Risk Management Plan (RMP). * RCRA Large Quantity Generator (LQG). * Air and Storm Water permits. * Maintain a current working knowledge of EHS regulations & understand how they impact business. * Accurately complete and revise regulatory reporting requirements and permit applications. * Interact with agency contacts & participate in or lead on-site visits or inspections from EHS regulatory personnel. * Perform EHS inspections, self-assessments, audits, and assist in corrective action creation and closure. * Conduct site safety training. * Conduct incident investigations and root cause analysis. * Monitor life-critical permit and job safety analysis programs. * Review and edit safety policies and procedures. * Ability to perform assigned functions under limited to no supervision. * This position will be responsible for supporting our Williamson, NY, location and will require monthly trips to the New York site. Required Qualifications * Experience in an industrial plant environment. * Four-year degree in Environmental or Chemical Engineering or related field with 5+ years of legitimate experience in the field. * Proven ability to lead and influence a positive health and safety culture. * Ability to communicate in both written and verbal forms in a clear and concise manner. * Ability to quickly assimilate information, follow-through and complete assignments in a timely manner. * Ability to "own" the position and address the details required to be effective in the position. * Good at prioritizing multiple tasks to meet deadlines. * Team player with a great attitude. A legitimate working knowledge of the following is required: * PSM / RMP * DOT HazMat * OSHA (HazCom, LCP. Etc.) * RCRA Solid Waste * Wastewater/Stormwater A legitimate working knowledge of the following is preferred: * Tier II Reporting * TRI Reporting * NDEP/ADEQ Regulations * DHS requirements

Job Description FLSA: Non-Exempt Overall responsibility/accountability for all aspects of lot checking on assigned route, including recording, handling, and depositing money from all parking-related operations ESSENTIAL DUTIES AND RESPONSIBILITIES: Include but are not limited to the following, as additional duties and responsibilities may be assigned. Provide a courteous and professional relationship with all customers, vendors, co-workers and managers. “Treat others as you would want to be treated.” Provide own transportation at own cost and expense, including, but not limited to fuel, maintenance, repairs and insurance Accurately inventory station pay boxes, collecting and recording all cash or cash equivalents (theater tickets, etc.) from each station, and securing all collected monies Accurately inventory parking lot, recording and crediting vehicles for payments received and noting vehicles displaying valid permits. Properly deposit in the designated bank all monies or cash equivalents and accompanying documentation at the end of each shift, or when five deposit bags or $400 has been collected. Change rates at stations, as directed Issue parking violation and “parking owed” notices to vehicles without payment or valid permit, accurately recording vehicle information as required May perform data entry, using electronic devices Accurately complete and submit all required paperwork for each shift Clear trash and debris from each station throughout the shift, reporting any maintenance or additional clean up required, such as potholes, missing or broken signage, or other hazards Inspect and verify location signage and rates Protect company property and/or equipment from damage or loss Report any vehicles meeting impound criteria to supervisor Patrols area to prevent thefts from parked automobiles Complete an incident report for claims of damage or to document any unusual incidents during shift. Accurate completion of shift reports, security logs, and any other such required documentation for each shift. Accurate completion and submission of time cards at end of your last shift before the pay period ends Maintain a clean, neat, professional appearance at all times. While on the job, wear the designated uniform, if required, and display identification badge Regular, consistent attendance during scheduled work hours and the ability to work overtime if requested QUALIFICATIONS: To successfully perform this job, an individual must be able to perform each essential duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma, or General Education Degree (GED), or one to three months related experience or training desirable. An equivalent combination of education and experience is acceptable. Licenses: Valid state-issued driver's license and proof of insurance. Must be able to pass a company driving skills test. Language Skills: Ability to read and comprehend simple instructions, short correspondence and/or memos in English. Ability to effectively present information in one-on-one or small group situations to customers, clients, and other employees of the organization in English. Mathematical Skills: Ability to add, subtract, multiply and divide with 10's and 100's. Ability to perform these operations using units of American money. Reasoning Ability: Able to apply common sense when performing duties and follow written and oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Physical Demands: While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk and/or run. The employee is occasionally required to sit; climb or balance; and stoop, kneel or crouch. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: Frequent exposure to wet and/or humid conditions, fumes, or airborne particles and outside weather conditions. The work environment noise level is usually moderate and occasionally loud. Other: Able to transfer/relocate to another facility/location without notice at any time. Note: All employees are subject to internal audits to ensure compliance of all policies and procedures related to recording, handling and depositing of money received and of other duties assigned. In the event an employee fails an internal audit, the consequence may be disciplinary action, up to and including termination of employment. Salary: We maintain broad salary ranges for our roles in order to account for variations in experience, training skills, geographic location, and market conditions, as well as to reflect our differing products and lines of business. We are committed to a diverse and inclusive workplace. We are an equal opportunity employer and do not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Minimum: Maximum: Location:Salt Lake City, UtahJob Type:Full time Job Title:Construction Contract AdministratorJob Description: GENERAL PURPOSE: The Construction Contract Administrator is an essential part of YESCO's pre-construction and bidding process, acting as the key link between construction opportunities and the sales team. This role ensures that all construction bids, contracts, and related documentation are compliant, organized, and accurately prepared for review and submission. ESSENTIAL DUTIES & RESPONSIBILITIES: Monitor and track construction bid sites to identify and prioritize projects aligned with YESCO's signage scope. Extract, download, and organize all pertinent bid documentation, including specifications, deadlines, compliance requirements, and construction drawings/plans. Prepare comprehensive, organized bid files for review by the sales team. Review and interpret complex contract requirements and terms to ensure compliance with client specifications and regulatory standards. Support the Account Executive and sales team by coordinating required documentation, including insurance forms, bonds, and compliance-related forms. Assist in completing and submitting bid packages accurately and on time. Proficiently review, edit, redline, and mark up construction drawings and documents using Adobe Acrobat, including adding dimensions, measurements, and annotations. Ensure all pre-qualification and vendor packages are completed for new bids or vendor setups. Monitor contracts, purchase orders, and agreements for compliance and risk considerations. MARGINAL DUTIES & RESPONSIBILITIES: Prepare subcontractor forms and maintain Google site information. Prepare safety packages and related documentation. Perform other functions as necessary or assigned. NATURE OF WORK CONTACTS: Assist sales team and project managers in understanding contract terms, conditions, and compliance requirements. Communicate with customers regarding contract clarifications and concessions. Coordinate with Risk Department for insurance and compliance matters. Support sales and project teams in resolving issues related to contracts, purchase orders, and agreements. TRAINING & QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Well-developed listening, oral, and written communication skills. Strong organizational skills and exceptional attention to detail. Ability to independently monitor bid sites, manage multiple deadlines, and take initiative. Proficient in Adobe Acrobat for editing, redlining, and marking up construction documents. Familiarity with construction bid documents, plans, and drawings. Understanding of contract lifecycle and terminology. Microsoft Office proficiency (Word, Excel, PowerPoint). Construction law coursework is preferred. PHYSICAL/SENSORY DEMANDS: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is generally performed in a safe and comfortable office environment. While performing the duties of this job, the employee is regularly required to: focus and sit for long periods of time; use computer to enter data; use telephone to converse with customers; perform repetitive wrist, hand and/or finger movement. The employee is regularly required to: talk, feel the attributes of objects, grasp, push, and reach with arms or hands. Must be able to occasionally move objects of 30 lbs. Specific vision abilities include: clarity of vision at 20 inches or less; and ability to adjust eye to bring an object into sharp focus. We maintain a drug free workplace. We do test for marijuana. YESCO is an EEO/AA employer. We welcome all qualified jobseekers. Jobseekers will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, religion or other legally protected status.

Join Reynolds Consumer Products…and Drive Your Career across a world of opportunities! We provide amazing job opportunities for growth with competitive hourly pay and benefits in an exciting, dynamic, fast-paced, and high-performance organization. If you are looking to build a strong career, we have an opportunity for you! We currently have an opportunity for Technical Services 5S Support located at our manufacturing facility in Lewiston, UT. HIRING IMMEDIATELY!! GREAT PAY! GREAT BENEFITS! GREAT CAREERS! Pay: $25.91/Hourly Responsibilities Your Role: You will have the opportunity to Make Great Things Happen! Assist with daily training of new employees or new to the job team members. Work safely in a manner that protects and promotes the health and wellbeing of the individual and the environment. Maintain the area in a clean/safe state. All housekeeping and 5S activities in the assigned area. Train and perform all tasks according to SWI. Responsible for meeting the scheduled maintenance of 5S standards for all buildings and grounds such as scheduled painting, sealing, and cleaning of walls and floors. Work independently and prioritize multiple work tasks. Effectively procure resources and information as necessary to perform 5S activities. Assist with snow removal/salting by all plant exits and employee walkways during normal shift hours after every snow fall. This includes access to recycling bins and resin silos. Provide assistance to the TPM team members in TPM tasks as assigned. Other miscellaneous duties as assigned. Assist with accident and near miss reporting and investigation. Responsible for complying with the GMP practices and programs to ensure safe food packaging product and to report food safety problems to those with authority to act. You will love it here if… You put safety first, always You listen, learn, and evolve You are passionate about collaboration, teamwork, and achieving shared goals You treat all people with respect, operating ethically, and embrace inclusivity You are committed to improving our impact on local communities Requirements We need you to have: High School diploma or equivalent. Prior experience using both sit down and stand-up forklifts with the ability to obtain your forklift certification. Ability to perform basic math such as addition, subtraction, multiplication, and division. Availability to work a flexible schedule with some nights and weekends. Ability to work overtime as needed. Must maintain appropriate physical conditioning to meet normal job requirements such as standing, sitting, walking, kneeling, bending and lifting. Must be able to lift 50 pounds on a regular basis. Must possess a valid drive license. Must be able to obtain mobile equipment license for forklifts, bobcat, and aerial lifts. Must be able to work at heights, stairs on roof, and silos. Must be able to read and write at a high school level or above. Ability to stand/walk 80-90% of scheduled workday. Ability to meet plant attendance expectations. Icing on the cake: Previous experience at a manufacturing facility. Mobile Equipment operation. Two years related work experience such as construction and painting. Basic math skills. Basic written and verbal skills. Ability to learn computer entry. Want to know more? Check out our website or connect with us on LinkedIn! Apply today to join a fast-growing innovative company! Not a good fit but know someone who is? Please refer them! Local candidates only, no relocation assistance available Join Reynolds Consumer Products and Drive Your Career across a world of opportunities! For applicants or employees who are disabled or require a reasonable accommodation for any part of the application or hiring process, you may request assistance by emailing us at ******************************. No recruiter calls or emails please. RCP affords equal employment opportunities to applicants without regard to race, color, religion, age, disability status, sex, marital status, protected veteran status, pregnancy, national origin, genetics, genetic information, parental status, or any other characteristic protected by federal, state or local law. RCP conforms to the spirit as well as to the letter of all applicable laws and regulations. Pay Range USD $25.91 - USD $25.91 /H

Join Reynolds Consumer Products…and Drive Your Career across a world of opportunities! We provide amazing job opportunities for growth with competitive hourly pay and benefits in an exciting, dynamic, fast-paced, and fun workplace environment. Are you looking to build a strong career? Then we have an opportunity for you! We are searching for a Lift Truck Operator 3 to join our team at our manufacturing plant in Lewiston, UT. HIRING IMMEDIATELY!! GREAT PAY! GREAT BENEFITS! GREAT CAREERS! Pay: $22.08-24.89 / hour *Pay rate is dependent upon prior experience and interview results Responsibilities Your Role: As a Lif Truck Operator 3, you will be responsible for Moving and controlling material coming into the plant, through the plant, and out of the plant. In this role, you will play a very important part in our plant and will help ensure that we are giving customers the best products in the industry! As a valued employee, you will have access to our competitive benefits package, and you will have opportunities for advancement. You will have the opportunity to Make Great Things Happen! Manage raw materials, pull and print orders, and maintain housekeeping and inventory in the receiving warehouse Principal Accountabilities: Communicate effectively with shift personnel Comply with company policies and procedures Investigate and correct inventory discrepancies Learn and comply with accepted safety practices Printing fiber orders for respective jobs Maintain blank fiber aisle housekeeping and inventory Maintain fiber printer and stencil printer and operate computer Operate all types of mobile equipment including forklift, electric and manual pallet jack, rack loader, sweeper, etc… Perform all assigned housekeeping duties such as emptying trash, disposing of broken pallets, sweeping, etc. Perform battery changes, inspection, and maintenance on all equipment Receive and unload incoming vendors/LTL carriers. Assist with all logistics activities as needed. Responsible for maintaining personal conditioning to physically perform essential job functions. Understand warehouse locater systems. Other duties as assigned. Assist in daily training of new employees or new to the job team members. Maintain Shipping/Receiving skills as needed. Pick, Prep, and delivery of parts to manufacturing. Transport finished goods from various points in the plant. You will love it here if… You put safety first, always You listen, learn, and evolve You are passionate about collaboration, teamwork, and achieving shared goals You treat all people with respect, operating ethically, and embrace inclusivity You are committed to improving our impact on local communities What we have to offer you here at Reynolds Wisely Pay Card - so you can get your money fast Comprehensive Benefits Plan (Medical, Dental, and Vision) Wellness Program that pays you back up to $1,000 a year! 401K PTO Tuition Assistance Employee Referral Program earn up to $1,000 Pay for Skills program Life Insurance Employee Resource Program Paid Parental Leave Adoption Assistance Infertility Coverage Enhanced Musculoskeletal Wellness Program Requirements We need you to have: Computer literacy including the following: Ability to use email and Microsoft Office programs Ability to learn computer programs Ability to learn inventory control systems Other computer skills Keyboarding Independent software Email Data management skills including typing and ability to use calculator Experience with bar code reading system Basic math skills Verbal and written communication skills Walk, Stand, Bend, Sit Lift 35 pounds on a regular basis Meet all physical requirements to safely operate mobile equipment Ability to reason, make quick decisions/choices, and respond effectively. Want to know more? Check out our website or connect with us on LinkedIn! Apply today to join a fast-growing innovative company! Not a good fit but know someone who is? Please refer them! Local candidates only, no relocation assistance available Join Reynolds Consumer Products and Drive Your Career across a world of opportunities! For applicants or employees who are disabled or require a reasonable accommodation for any part of the application or hiring process, you may request assistance by emailing us at ******************************. No recruiter calls or emails please. RCP affords equal employment opportunities to applicants without regard to race, color, religion, age, disability status, sex, marital status, protected veteran status, pregnancy, national origin, genetics, genetic information, parental status, or any other characteristic protected by federal, state or local law. RCP conforms to the spirit as well as to the letter of all applicable laws and regulations. Pay Range USD $22.08 - USD $24.89 /H

Make a meaningful difference: At Thatcher Chemical facilities across the nation, our manufacturing teams create the essential chemistries, processes, and solutions that support clean water, safe environments, reliable infrastructure, and critical industries. From production and quality to logistics and distribution, your precision, dedication, and commitment to continuous improvement help transform raw materials and innovative science into real-world solutions. Your purpose-driven work plays a vital role in protecting public health, supporting communities, and shaping a safer, more sustainable future. Thatcher Company is looking for a Senior R&D Chemist for Concrete Additives to lead the development of construction products at Thatcher Company headquarters, located in Salt Lake City, UT. Compensation $100,000-$150000 Major Accountabilities: * Lead the company's development of new products/technologies for the Construction Market. * Develop manufacturing processes for new products and optimize existing manufacturing processes for the construction division of Thatcher Company. * Support Thatcher's operational excellence group in the scale-up and launch of new products and processes. * Develop finished product specifications and validate analytical test methods which are needed to characterize new construction products. * Improve the existing construction product line and search for opportunities to optimize related manufacturing processes. * Collaborate with Thatcher's marketing and sales departments to understand the needs of the construction industry and develop technical, customer-driven solutions. * Develop a thorough understanding of the construction market through market research and analysis of competitive offerings. * Manage multiple projects simultaneously and communicate project status through written technical reports and live presentations. * Evaluate and approve new raw materials or raw material substitutions as requested by Thatcher's procurement team. * Provide storage and shelf-life recommendations supported by low temperature testing, corrosion studies, and ambient and accelerated aging studies. * Assist the marketing department with the development of technical marketing literature. * Provide both internal and external technical support and guidance.

Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific Foods, Pepperidge Farm, Prego, Pace, Rao's Homemade, Snack Factory, Snyder's of Hanover. Swanson, and V8. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. GENERAL SUMMARY Operate Robotics machines within the Robotics Team, including the Robots 1, 2, & 3, Fallas, Schubert, Tumbler, Overwrap PRIMARY RESPONSIBILITIES Safely set up, adjust and operate robotics machines such as Palletizers, Fallas machines, Pearson, Schubert, Tumbler. Will rotate positions, give breaks, and operate as schedule requires. Maintain area in good housekeeping order, complete required paperwork, and perform other duties as assigned by supervision. Participate as team member to accomplish training and cover schedules. Overtime and weekend work may be required. Support and participate in preventive maintenance program. Comply with food safety procedures and follow plant GMPs. Graveyard Shift MINIMUM EDUCATION REQUIRED: High School Diploma or GED and/or 1-year production experience in a manufacturing environment required. EDUCATION & EXPERIENCE PREFERRED (NOT REQUIRED): preferred to have production line manufacturing experience or to have food service and food handling experience Compensation and Benefits: The starting rate for this full-time, hourly position is $22.65 plus shift differential. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Make a meaningful difference: At Thatcher Chemical facilities across the nation, our manufacturing teams create the essential chemistries, processes, and solutions that support clean water, safe environments, reliable infrastructure, and critical industries. From production and quality to logistics and distribution, your precision, dedication, and commitment to continuous improvement help transform raw materials and innovative science into real-world solutions. Your purpose-driven work plays a vital role in protecting public health, supporting communities, and shaping a safer, more sustainable future. Thatcher Company, Inc., based in Salt Lake City, Utah, is seeking an Sr. Accounting ERP Specialist to oversee cost accounting and financial operations within our process chemical manufacturing environment. Competitive salary $70-$100k Responsibilities: * Serve as the primary liaison between the accounting department and IT to maintain, enhance, and troubleshoot ERP systems (e.g. SAP, Oracle, M3, NetSuite). * Ensure that ERP systems and accounting processes align with GAAP and internal compliance requirements. * Analyze and document financial workflows to identify opportunities for system and process improvements. * Configure, test, and support financial modules within ERP systems, including General Ledger, Accounts Payable, Accounts Receivable, Fixed Assets, and Inventory. * Support month-end and year-end closing processes by ensuring systems provide accurate and timely financial data. * Assist in designing and generating custom financial reports to support business decision-making and compliance. * Lead or support system upgrades, implementations, and integrations as they relate to finance and accounting functions. * Develop and deliver training and documentation for accounting users on ERP functionalities and system best practices. * Participate in ERP system implementations, upgrades, and enhancements, including gathering accounting requirements, performing user acceptance testing (UAT), and supporting post-implementation activities. * Translate financial and regulatory requirements into ERP system configurations and functional specifications, ensuring alignment with business objectives and compliance standards. Qualifications: * Bachelor's degree in accounting, Finance, Information Systems, or related field. * 5-10 years of experience working with ERP/accounting systems in a financial or operational support role. * Strong knowledge of accounting principles and internal controls. * Experience with ERP platforms such as SAP, Oracle, M3, or NetSuite. * Proficient in Microsoft Excel and financial reporting tools. * Excellent analytical, communication, and project management skills. * Ability to work cross-functionally and communicate effectively with both finance and IT professionals. Preferred Skills: * Experience with business intelligence and reporting tools (e.g. Power BI, Qlik, Tableau). * Familiarity with manufacturing environments and cost accounting concepts. * Experience with ERP system upgrades, implementations, or process improvement initiatives.

Job Summary: Lead the technical development and implementation of environmental, health, and safety programs. Ensure compliance with local, state, and federal regulations, spearhead risk assessments and audits, and drive continuous improvement in safety performance and environmental management. When staffed, provide directions to an intern responsible for environmental regulation tasks. Key Responsibilities: * Program Development & Compliance: Develop, implement, and maintain EHS policies and programs in line with regulatory requirements and industry best practices. Stay current with updates to OSHA, EPA, and other relevant standards. * Risk Assessment & Auditing: Conduct regular site inspections, audits, and risk assessments to identify hazards. Recommend and oversee corrective actions. * Incident Management & Investigation: Lead root‑cause analysis of incidents and accidents, implement preventive action plans, monitor outcomes, and report findings. * Training & Culture Building: Design and deliver engaging training programs on safety, environmental compliance, and use of PPE. Advise operations on safe practices. * Environmental Management: Monitor environmental outputs such as waste, emissions, and discharge; manage SDS availability; coordinate spill responses and wastewater tasks. * Environmental Regulations: Maintain the environmental regulations requirements of the state, national government and our customers. If staffed, direct an EHS intern handling environmental regulation tasks. * Stakeholder Collaboration & Reporting: Coordinate with internal teams, external * agencies, and regulatory bodies. Prepare documentation and reports for audits and management review. * Emergency & Security Response: Support emergency preparedness efforts; oversee response planning and cross‑functional coordination in crises. * Additional Duties: Serve as Radiation and/or Laser Safety Officer, oversee workers' compensation processes, conduct reasonable suspicion testing, lead the Safety Committee, and support facility systems and security infrastructure as needed. Education and Experience: * Bachelor's degree in Engineering (Environmental, Safety, Chemical, Industrial), Environmental Health, or related field * Minimum 3-5 years of professional EHS engineering experience in environmental or safety roles. * Proven supervisory or project leadership experience preferred. * Proficient knowledge of handling hazardous chemicals. * Knowledge of handling managing a radiation exposure program. * Solid understanding of OSHA, EPA, and environmental regulatory frameworks. * Skilled in risk assessments, incident investigations, training development. * Certifications (e.g., NEBOSH, CSP) a plus. Competencies: To successfully perform the job, an individual should demonstrate the following competencies necessary for the essential functions of the position: * Strong communication and presentation skills * Proficiency in Microsoft Office (Word, Excel, PowerPoint); familiarity with data analysis tools * Excellent organizational, time management, and analytical abilities * High initiative, ability to work independently and collaboratively * Flexible schedule to support emergency response and after‑hours needs

Trove Brands is a privately-held house of brands including BlenderBottle , Owala , EcoBrite™, and Whiskware . Our patented and best-selling products are designed to simplify and improve everyday life with leading-edge innovation, incomparable quality, and aspirational style. A career at Trove Brands is not about punching the clock. It's about embracing exciting and fast-paced opportunities that sharpen your skills, drive innovation, and play an integral role in growing our global reach. Your work will not only impact the company, it will impact the lives of millions of people around the world. When you step up to a career at Trove, you step up to cutting-edge excellence. You sign up for bold action and invigorating synergy. You agree to face-and break through-new challenges every single day. Job Description We're looking for a creative and experienced senior Industrial Designer to join our product development team. You'll help shape the future of our products through bold ideas, and refined aesthetics. This role requires a balance of creative vision and technical expertise-someone who can take an idea from initial concept through engineering handoff. As part of our collaborative team, you'll contribute to front-end creative development efforts that explore innovative solutions to real consumer needs, applying a clear understanding of materials, manufacturing processes, and design-for-manufacture principles. From early ideation and concept design to 3D CAD modeling and high-quality visualization, you'll play a key role in developing products that are as functional as they are visually compelling. If you have a proven track record of delivering thoughtful, manufacturable designs across a range of categories-including consumer products and lifestyle goods-you'll fit right in with our team of creators. Bring your curiosity, craftsmanship, and drive to make an impact through purposeful design-we'd love to see your portfolio. Every role at Trove Brands is critical to our successful functioning as a whole. Your specific responsibilities as an senior Industrial Designer at Trove Brands will include: Collaborate with fellow industrial designers and cross-functional team members to define the vision, style, and direction for new hard goods and product initiatives. Solve design challenges creatively and adaptively, clearly communicating your ideas through concept sketches, renderings, and mechanical visualizations. Apply ergonomic principles to ensure products are comfortable, intuitive, and user-friendly-validating concepts through models and prototypes. Develop detailed 3D CAD models to support prototype creation and effectively communicate design intent to product development teams. Thrive in a dynamic environment, adapting to shifting priorities and project scopes. Qualifications We seek team members who are adept at contributing their personal expertise to a collaborative work environment. For this role, we're looking for someone with the following skills and experience: Degree in Industrial Design (B.F.A. or B.S.) Minimum of 8 years of professional experience in industrial design, with a proven background developing products in the consumer goods industry. An industrial design portfolio that demonstrates your design, storytelling and problem-solving skills (portfolio or portfolio link must be submitted with your resume) Strong ideation and visualization skills Excellent communication skills and comfortable discussing concept design and the design process Experience designing plastic parts for all types of plastic molding processes Effective working both independently and collaborating in a team environment Quick sketch ideation and presentation rendering Proficient in Solidworks, with the ability to concept model and model for functional prototyping Skillful in Keyshot, Illustrator and Photoshop (Adobe Suite) Packaging experience is a plus Onsite position at our Utah headquarters Additional Information Our culture is passionate, entrepreneurial, and energetic. We value innovation through collaboration. And while we work smart and hard, we also connect and celebrate with equal gusto. We host team-building activities, athletic events, and seasonal celebrations to foster community and reward accomplishments. Bottom line? You'll love it here. Among the many benefits our team members enjoy are: Comprehensive medical, dental, and vision care 401k package with employer matching Paid Time Off Maternity/Paternity leave Full indoor basketball/volleyball court Fully equipped fitness center (cardio, weights, functional fitness area, lockers and showers, etc.) Yoga studio Meditation/Nap room And much more! Trove Brands is an equal opportunity employer. Phone calls regarding this position are not accepted.

Join the Team Where Remarkable Begins - C.H. Guenther At C.H. Guenther, we've been making meals memorable since 1851. From artisan breads to savory gravies, our products bring comfort and quality to tables across North America and Europe. But it's not just about food-it's about people. We're looking for passionate, driven individuals to join our growing team. Whether you're on the production floor, in R&D, or leading innovation in the office, your work helps shape the future of food. Why Work With Us? * Legacy of Excellence: Founded in 1851, we're one of the oldest continuously operating food companies in the U.S. * Global Reach: Manufacturing locations across the U.S., Canada, and Europe. * Collaborative Culture: We believe in teamwork, innovation, and shared success. * Competitive Pay & Benefits: Including health coverage, retirement plans, and career development. * Sustainability Commitment: We're investing in a better future-for our planet and our people. We are proud to offer competitive compensation and benefit programs that include medical, dental, vision, flexible savings account, health savings account, 401K matching savings plan, employee assistance program, wellness programs, life insurance, AD&D insurance, disability insurance, tuition reimbursement, student loan counseling, employee referral program, paid time off, and more! For additional information about our company, go to ************ C.H. Guenther & Son and its subsidiaries are E-Verify participating employers. Click here for more information regarding E-verify. All offers of employment are contingent upon successful completion of the pre-employment screening process which includes a drug screen and review of criminal background and other records as required. AA/EEO/Drug-Free Employer

Since 1869 we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Why Campbell's… Benefits begin on day one and include medical, dental, short and long-term disability, AD&D, and life insurance (for individual, families, and domestic partners). Employees are eligible for our matching 401(k) plan and can enroll on the first day of employment with immediate vesting. Campbell's offers unlimited sick time along with paid time off and holiday pay. If in WHQ - free access to the fitness center. Access to on-site day care (operated by Bright Horizons) and company store. Giving back to the communities where our employees work and live is very important to Campbell's. Our "Campbell's Cares" program matches employee donations and/or volunteer activity up to $1,500 annually. Campbell's has a variety of Employee Resource Groups (ERGs) to support employees. How you will make history here... The Maintenance Manager oversees all plant maintenance activities, collaborating with key stakeholders to support the plant's strategic goals focused on Safety, People, Quality, Delivery, and Cost. This role involves leading training and capability development initiatives to build a high-performance maintenance team. Additionally, the Maintenance Manager will recommend and implement improvements to engineering and maintenance practices to ensure maximum operational efficiency. This position manages a team of 40 employees responsible for assets across multiple production lines in a high-speed food manufacturing facility spanning over 400,000 square feet. What you will do... Asset Care and Reliability Strategy: Develop and lead the implementation of the site's Asset Care and Reliability strategy for each department that maintains the plant's manufacturing and utilities systems and supports the site's financial, operating, and strategic objectives. Technical Assistance: Provide technical assistance in the purchase and maintenance of all equipment. People Development: Develop and lead a competent and efficient Maintenance Department workforce while ensuring the team has the experience, tools, supplies, and materials required for performing maintenance services to achieve required business outcomes.. Operational Excellence: Leverage the Maintenance function to support Operational Excellence initiatives, collaborating with Operations, Quality, and other functions as required to improve plant KPIs. Problem Resolution: Coordinate with production, engineering, and quality teams to identify and resolve maintenance-related issues and optimize production processes. Strategic Planning: Develop, recommend, and review long-term strategies for expense and capital initiatives relating to the Maintenance Department and the successful operation of the plant. * Leadership and Team Development: Balancing the training and development needs of a diverse maintenance team while ensuring high performance and morale. * Strategic Collaboration: Working closely with key stakeholders to align maintenance activities with the plant's strategic goals, which requires effective communication and negotiation skills. * Operational Efficiency: Continuously identifying and implementing improvements to engineering and maintenance practices to enhance operational efficiency, which involves complex problem-solving and innovation. * Safety Compliance: Ensuring all maintenance activities comply with safety regulations and standards, which requires meticulous attention to detail and adherence to policies. * Resource Management: Managing resources effectively to meet maintenance demands while optimizing costs, which involves strategic planning and budgeting. * Technical Expertise: Developing and maintaining advanced technical knowledge in plant maintenance and engineering practices, which requires continuous learning and staying updated with industry advancements. * Risk Management: Identifying and mitigating risks associated with maintenance activities to prevent downtime and ensure smooth operations. * Performance Metrics: Monitoring and analyzing performance metrics to drive continuous improvement and achieve plant goals. Who you will work with... * Report into Director, Site Operations What you will bring to the table... (Must Have) * High School Diploma or GED * 5+ years of maintenance experience in manufacturing * 3+ of supervisory experience It would be great if you have... (Nice to Have) * Bachelor's Degree, preferably in a technical discipline * 5+ years of Maintenance experience within Food Manufacturing * Demonstrated ability to lead and inspire teams, driving performance and fostering a culture of continuous improvement and engagement. * Transformation experience in Total Productive Maintenance (TPM) * Six Sigma or CMRP certification * Proficiency and knowledge of Computerized Maintenance Management Systems (CMMS) such as SAP and experience with storeroom/parts room operations and MRO. * Working knowledge of Safety Standards, GMPs and sanitary design for equipment specifications, installations and/or modifications. * Familiarity with RCM, FMEA, RCA and other reliability concepts/methods. * Experience working in a continuous operation environment and matrixed organization. Compensation and Benefits: The target base salary range for this full-time, salaried position is between $102,600-$147,500 Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Employee Type: Full time Job Type: Production Operations Job Posting Title: Scanner About Us: TreeHouse Foods (NYSE: THS) is a leading manufacturer of private label packaged foods and beverages, operating a network of over 20 production facilities and several corporate offices across the United States and Canada. At TreeHouse Foods, our commitment to excellence extends beyond our products and revolves around our people. We are investing in talent and creating a performance-based culture where employees can do their best work and develop their careers, directly impacting our mission to make high quality, affordable food for our customers, communities, and families. We hope you will consider joining the team and being part of our future. Named one of America's Best Large Employers by Forbes Magazine, we are proud to live by a strong set of values and strive to "Engage and Delight - One Customer at a Time." Guided by our values-Own It, Commit to Excellence, Be Agile, Speak Up, and Better Together. We are a diverse team driven by integrity, accountability, and a commitment to exceptional results. We embrace change, prioritize continuous learning, and foster collaboration, transparency, and healthy debate. Together, we set each other up for success to achieve enterprise-wide goals. What You Gain: Competitive compensation and benefits program! Enrollment in our wellness and employee assistance programs! Paid holidays, vacation, and other competitive paid time off opportunities! An inclusive working environment where you can build meaningful work relationships with a diverse group of people Leaders who are invested in supporting your career growth. Opportunities to be recognized for outstanding contributions to your team through our employee recognition programs. Job Description: Duties and Responsibilities (include but not limited to): Job duties include, but are not limited to: Coordinating with production to ensure material is staged for current work order and for upcoming changeovers. Allocating material pulled from staging locations to the correct work order (real-time) Verifying inventory accuracy for all materials in the staging locations. Ensure all pallets coming from production are accurately labeled, stacked and wrapped, and correctly returned to a warehouse location. Perform end of shift pallet reconciliation with distribution lead. Accurately count, receive, and store items in specific location. Maintain a clean safe work area. Cycle counting inventory locations. Responsible for food safety, food quality and food defense. Other duties as assigned. PHYSICAL DEMANDS: Ability to drive lift truck Able to lift 50 lbs. Work in freezing temperatures Work safely in a manufacturing environment around material handling equipment and moving conveyors. Qualifications/Education/Experience/Skills Education: H.S. Diploma or GED Experience: 1 - 2 years' experience in a warehouse and/or production environment. 2 years' experience driving a forklift must have current/valid Utah Driver's license Ability to read, write and speak English Ability to understand basic math concepts Basic computer skills needed preferred experience with handheld scanner technology Operate an RF scanner Must be able to work with minimal supervision Excellent attention to detail required Ability to lift 50 lbs. Good written and verbal communication skills The above statements are intended to describe the general nature and level of work being performed by individuals assigned to the job. They are not intended to an exhaustive list of the responsibilities, duties and skills required of individuals so classified. Your TreeHouse Foods Career is Just a Click Away! Click on the “Apply” button or go directly to ****************************** to let us know you're ready to join our team! At TreeHouse Foods, we embrace diversity and inclusion for innovation and growth. We are committed to building inclusive teams and an equitable workplace for our employees to bring their true selves to work to help us “Engage and Delight - One Customer at a Time”. TreeHouse Foods is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact disability-accommodations@treehousefoods.com TreeHouse Use Only: #IND1

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Director, Data Center Services Center of Excellence Data Center COE Service Site Manager At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. Write the next chapter of your ABB story. Your role and responsibilities In this role, you will have the opportunity to lead FWT, installation, commissioning, testing, and handover activities on-site, acting as the single point of contact for the customer. Each day, you will manage on-site presence throughout the project, ensuring coordination and smooth execution of all work activities. You will also showcase your expertise by planning, scheduling, and coordinating service resources based on guidelines. The work model for the role is remote (#LI-Remote) You will be mainly accountable for: * Plans project on-site activities with Project Manager including necessary local resources, equipment and milestones. * Coordinates agreement between customer and external resources on construction targets, health and safety requirements, site organization and policy. * Responsible, from receiving the assigned site area from the customer or Project Manager to handing over to the end customer on completion day, for coordinating all on-site activities to ensure the successful execution of start-up, construction, erection, testing and commissioning activities in alignment with contract specifications, quality standards, schedule, and safety requirements. * Serves as a project representative by building and maintaining effective relationships with customers as well as other local organizations such as authorities, banks, and suppliers to ensure their active support of field activities. * Ensures detailed and up-to-date construction Health & Safety (H&S) plan is in place in respect of each work package, compliant with the ABB H&S plan. * Ensures all on-site resources are properly trained on company health, safety and environment policy and proactively promotes health and safety considerations to project partners throughout the project. * Empowered to suspend any activities on site (be it by ABB personnel or by subcontractors) in case of HSE violation and, if a situation arises, takes the necessary steps to ensure that ABB employees and other persons who may be present are not put at risk. * Ensures correct handling, storage and installation of ABB-delivered equipment, coordinating on-site storage as well as shipment logistics to secure timely site delivery of equipment and material. * Manages the sub-contractors on site hired by ABB to ensure necessary quality and progress achieved to meet delivery date and agreed standards. * Controls project cost for the project site work, monitors actual spend against forecasts, and estimates final cost for the same. Manages the petty cash and has delegated authority for local purchasing within agreed limits. * Ensures all documentation is modified and updated as necessary, the document handling system is maintained, and latest revisions are used for the construction work on site. * Ensures (with HR support) that the area of responsibility is properly organized, staffed, skilled and directed. * Guides, motivates and develops direct and indirect reports within HR policies. Coordinates local accommodation, site facilities, office equipment, etc. Qualifications for the role * BS Engineering, BS Management required. * 5+ Years Field service project experience with an electrical OEM, experience leading long term field assignments, and field quality assurance delivery focusing on procedures and implementation. * Ability to travel 80-100% of the time within North America and ability to be away from home for extended periods. * Strong understanding of site commissioning and oversight of engineered solutions including IEC61850 projects. * Ability to develop and implement test, start-up, and commissioning plans with third party Cx agents. * Experience leading start-up teams responsible for ABB and GE LV and MV electrical equipment, relays, and PRN networks preferred. * Experience leading multidisciplinary site teams of electrical field engineers and technicians as well as third party contractors preferred. * Candidates must already have a work authorization that would permit them to work for ABB in the US. More about us ABB's Service Division partners with our customers to improve the availability, reliability, predictability and sustainability of electrical products and installations. The Division's extensive service portfolio offers product care, modernization, and advisory services to improve performance, extend equipment lifetime and deliver new levels of operational and sustainable efficiency. We help customers keep resources in use for as long as possible, extracting the maximum value from them, and then recovering and regenerating products and materials at the end of their useful life. We value people from different backgrounds. Apply today for your next career step within ABB and visit *********** to learn about the impact of our solutions across the globe. #MyABBStory ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. While base salary is determined by things such as the successful applicant's qualifications and experience, this position is expected to pay between $98,700 and $157,920 annually and is eligible for a short-term incentive plan/annual bonus. my BenefitsABB.com We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Job Title: Electrical Department Lead Department: Engineering Reports to: Engineering Manager The Electrical Department Lead Engineer provides safe, "Best for Project" solutions for complex projects, while ensuring regulatory compliance for all electrical engineering deliverables. The Electrical Department Lead Engineer supervises the electrical engineers and designers, conducts peer reviews, ensures quality checks of the work, manages personnel development and succession planning, teaches and mentors, plans and distributes the work, and ensures continuous improvement of department standards. ESSENTIAL DUTIES AND RESPONSIBILITIES HEALTH AND SAFETY Work in compliance with all health and safety rules and regulations for Cementation Be aware of any health and safety hazards or infractions and report same to Health and Safety Department Ensure all applicable safety codes and regulations are met by appropriate design and use of technology Be a champion for safety, advocating safe behavior while incorporating safety into the designs produced by the group GENERAL DUTIES AND RESPONSIBILITIES This description lists the core responsibilities and duties of the position. Additional duties deemed to be within the incumbent's capabilities, on an as required basis, might be assigned by management. Lead the electrical engineering group, providing guidance to the team on project execution Model electrical systems in ETAP and perform load flow, short circuit protection coordination, and arc flash studies Select electrical equipment and work with designers on electrical equipment layouts Provide input on P&IDs and interpret them as needed to design I/O schematics Design and create control panel layouts, bill of materials, and schematics Design shaft signaling and fiber/communication network systems Participate in design reviews, addressing electrical and other concerns and collaborating with the Cementation Operations group to ensure that facilities will be built in the safest, most efficient, and cost-effective manner possible Maintain, develop, and adhere to Cementation engineering standards Provide level of effort estimates for engineering proposal submissions Provide electrical material estimating support to business development team As required, participate in marketing or bid meetings to answer questions related to project scope, or Cementation's technical capabilities Other duties as assigned TRAVEL REQUIREMENTS This position has the requirement for occasional travel to project sites, offices, and to conduct shop reviews Travel period may range from one day to around 1 week and may include overseas assignments SUPERVISORY RESPONSIBILITIES Assess group availability against the current workload, set priorities with Project Managers and assign work appropriately Actively participate in the development of employees understanding their career aspirations and developing pathways for achievement Provide coaching to direct reports in the selection of electrical equipment and the design of electrical circuits and network systems, to ensure compliance with codes, standards, regulations, and company and Client standards Enforce company policy through disciplinary action as required Participate in group recruiting efforts by preparing candidate requirements, interviewing, assessing and recommending candidates, and managing the probationary period Check and approve the timesheets of direct reports EDUCATION AND EXPERIENCE Bachelor of Science Degree in Electrical Engineering from an ABET accredited institution Registered as a Professional Engineer Minimum of 8 years of relevant experience Experience in discipline specific design of underground mining or heavy industrial is preferred SKILLS, KNOWLEDGE & ABILITIES Safety oriented Collaborative team player and leader Professional Effective communicator Engaged Innovative Self-starter Positively reacts to change Knowledge and use of NFPA 70 NEC, NFPA 70E, UL508A, & IEEE Standards Knowledge of underground/above ground mining infrastructure is beneficial Knowledge and skills in the following software considered an asset: AutoCAD Electrical, Navisworks, Revit MEP ETAP or other recognized electrical analysis software Bluebeam Revu MS Office Suite WHAT WE OFFER Competitive pay Company and personal performance bonus Safety bonus Hybrid work schedule (3 days in office, 2 from home) Collaborative, innovative, and rewarding work environment Unique and exciting project work Cementation is an Equal Opportunity Employer.

Manufacturing Engineering Technician At Ortho Development, we help people do what they love by restoring mobility through innovative orthopedic hip and knee solutions. From our headquarters in Draper, Utah, we're proud to provide meaningful work with a strong, collaborative culture where every team member can make a difference. Here, you'll find teammates who care, leadership that listens, and opportunities to learn, grow, and succeed. We offer competitive benefits, a workplace environment designed to help you thrive and promote work-life balance. As a Manufacturing Engineering Technician, you will support manufacturing engineers & Programmers in designing, developing, and improving manufacturing processes, tools, and equipment. This role is hands-on and focused on ensuring efficient, safe, and high-quality production operations. This full-time onsite position is available to start immediately and is a great opportunity in the exciting medical device industry. Location: Onsite - Draper, UT Schedule: Monday- Friday Your responsibilities: Follow documented procedures, work instructions, and cleanroom protocols to manufacture high-quality medical device components. Perform first-part inspections and prove-outs on CNC machines, including setup and changeovers. Produce prototypes and support pilot builds for new product development. Act as the first responder to equipment malfunctions or quality issues; perform initial troubleshooting and escalate to appropriate personnel as needed. Communicate effectively with engineering, quality, and production teams to resolve issues promptly. Adhere to all quality requirements as defined by the Quality Management System (QMS), including FDA and ISO 13485 standards. Support documentation and traceability for Device History Records (DHRs) and ensure compliance with Good Manufacturing Practices (GMP). Assist in the setup, validation, and optimization of manufacturing processes, including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ). Monitor production lines for process inefficiencies and recommend improvements to enhance throughput and reduce waste. Implement lean manufacturing principles and contribute to continuous improvement initiatives. Maintain, calibrate, and troubleshoot manufacturing equipment and tooling to ensure consistent and reliable performance. Collaborate in the design, testing, and implementation of jigs, fixtures, and automation solutions to improve process capability. Create, revise, and maintain work instructions, standard operating procedures (SOPs), and process documentation. Accurately record test results, equipment performance data, and process changes to support audits and regulatory inspections. Maintain documentation related to quality improvements and engineering change orders. Work closely with manufacturing engineers, R&D, quality assurance, and production teams to support daily operations and strategic initiatives. Support new product introductions (NPI) and design transfer activities from development to production. Train operators and technicians on new equipment, processes, and quality standards. Follow all safety protocols and environmental regulations, including cleanroom and contamination control procedures. Participate in safety audits, risk assessments, and hazard analyses to ensure a safe working environment Perform other job-related duties as assigned Requirements: Specific training courses in this field: Machining certificate or trade school (Preferred) Experience programming CNC equipment (Preferred) Experience with ERP systems (Preferred) Experience specific to this position: 5+ years experience Use of inspection equipment, e.g. calipers, microscope, optical measurement Operation of manual and coordinated measuring machines Strong troubleshooting skills for process and equipment issues Set Up and Operation of 5 axis CNC equipment Experience with manual mill and lathe Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discounts Flexible spending account Health insurance Life insurance Paid Holidays Paid time off Parental leave Tuition reimbursement Vision insurance Wellness incentives UTA Transit Pass