Inspector jobs in Abington, PA

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job Details PA -Montgomeryville - Montgomeryville, PA $19.00 HourlyDescription Finishing/Packaging/Inspector Responsibilities: Essential Job Functions: Set up and run finishing equipment on which competency has been documented by the Production Manager, including shrink wrapper, heat sealers, auto baggers, tipper, serializer, Longford counter and similar equipment listed on the Skills Matrix Final quality inspection in accordance with AQL standards and quality escalation procedures Packing according to work order specifications and delivery of finished goods to order fulfillment department Performance of all scheduled maintenance operations as directed by the Production Manager Diligent adherence to the First Article Sign Off (FASO) and related QMS procedure Achievement of quality and productivity targets established by the Production Manager Cooperation with all team members in the efficient execution of manufacturing processes Maintain a clean and organized workspace in accordance with 5S principles Maintain a safe and injury free work environment Perform related duties as assigned by supervisor Maintain compliance with all company policies and procedures Qualifications Key Competencies: High energy, enthusiastic, success oriented, goal driven approach Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to lift and carry up to 50 pounds Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards Preferred Requirements: Documented finishing/inspection experience in a fast-paced manufacturing environment or demonstrated aptitude for machine operation and maintenance Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers Computer proficiency (MS Office - Word, Excel and Outlook) and experience with an ERP system is preferred

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

GTF is seeking an Inspector to join our Construction Services team in Marlton, NJ. This position requires regular attendance in the South region of New Jersey. What you'll be challenged to do: As an Inspector, you will perform quality assurance inspections on major roadway projects, ensuring compliance with industry standards and GFT's Quality Management Protocols (QMP). This is an excellent opportunity for a detail-oriented professional with a strong background in coating application and inspection on bridge-related projects. You'll play a vital role in maintaining structural integrity and safety while representing Gannett Fleming and our client in a professional and proactive manner. In this capacity, the successful candidate will be responsible for the following: Perform in-process and hold-point Quality Assurance oversight for bridge rehabilitation/roadway projects. Complete daily inspection reports to document work progress and compliance. Act as a representative of the client and GFT, maintaining professionalism in both appearance and communication. Be onsite during contractor work activities, ensuring adherence to approved procedures and standards. In this capacity, the successful candidate will be responsible for the following: High School Diploma. Minimum of 5 years of experience in inspections on roadway/bridges projects. Valid driver's license and reliable transportation for project site visits. What We Prefer You Bring Strong understanding of construction drawings, and referenced technical standards. Excellent written and verbal communication skills for reporting and coordination. Proficiency in Microsoft Office, Outlook, and Windows for documentation and reporting. Ability to travel and work flexible schedules, including night shifts and overtime. Physically capable of working outdoors in various conditions, maneuvering challenging terrain, and passing a medical evaluation. Compensation The hourly rate for this position is $40.00 - $45.00 per hour, based on experience and geographic location. Featured Benefits Comprehensive benefits package, including medical, dental, vision, disability, and life insurance. Wellness programs, parental leave, and pet insurance. Tax-deferred 401(k) savings plan. Competitive paid-time-off (PTO) accrual. Tuition reimbursement for continued education. Commitment to professional development with access to internal and external training programs. Incentive compensation for eligible positions. At GFT, a privately held AEC firm, we innovate where transportation, water, power and buildings converge. We call this the Infrastructure of Life. We measure our success by the strength of our relationships - that's why we're the employer of choice for 5,000+ of the industry's brightest engineers, planners, architects, inspectors, designers, and more. Our clients choose us for our expertise and prefer us for our nimble approach, creativity, and personal touch. Backed by over a century's experience, together we're building a lasting legacy for future generations: stronger communities, a healthier planet, and better lives. GFT: Ingenuity That Shapes Lives™ GFT is an Equal Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veterans' status or other characteristics protected by law. Unsolicited resumes from third party agencies will be considered the property of GFT. Location: Marlton, NJCore Business Hours: Construction hours Employment Status: Hourly Salary Range: $40.00 - $45.00 per hour Salary dependent upon experience and geographic location

Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: * Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. * Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. * Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. * Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. * Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. * Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. * Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. * Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. * Determines acceptability or rework by conducting inspections and physical tests of reworked product. * Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. * Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. * Contributes to team effort by accomplishing related results as needed. * Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator * Performs other duties as assigned * Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: * Health Insurance * Dental Insurance * Vision Insurance * Basic and Voluntary Life * Long-Term Disability * Flexible Spending Accounts * Employee Assistance Program * Paid Time Off * Paid Holidays, Bereavement, Jury Duty * 401(k) with company match * Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful. Salary Description $40,000 - $55,000

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Craft InspectorLocation: Middletown, PA (Surrounding Areas) Duration: 03/010/2024-12/31/2024Job Description:· The Craft Inspector performs the quality control (QC) function over the contractor's work as a part of the Company's quality assurance program and is responsible for the completion of all activities in his area of assignment in accordance with the appropriate Company specifications and the approved for construction drawings.Duties may include, but are not limited to:· Right-of-Way Clearing and Grading' Ditching, Stringing, and Bending' Lowering, Padding, and Backfilling' Road Boring' Tie-ins' Clean-up' inspection.· The inspector works under the direction of the Chief Inspector may be assigned additional responsibilities as required· The inspector provides quality assurance through inspection of work and materials for conformance to requirements.· The inspector is to complete required documentation (i.e. reports and log books) in a timely, concise, and accurate manner.· Familiarization with the approved construction drawings and the appropriate Company specifications in order to assure the work is performed in accordance with those requirements.· Familiarization with Contract documents (Agreement) as it relates to his or her duties on the project· Familiarization with applicable industry and regulatory codes' Familiarization with the Pre-Job Notes · Familiarization with the sequence of the work and plan inspection of upcoming activities· Report safety issues to the Chief Inspector and Safety Inspector· Drawing markups for as-built records· Hydrostatic tests and any test failures· Quantity, size, wall thickness, grade, heat number, other pipe nomenclature and pipe coating, and its location· Understanding the basics of pipe alignment, welding, and its inspection (specialized inspectors are required for the actual inspection)· Condition of ditch bottom Rocks, roots, clay, and other debris· Lifting and lowering in equipment· Understanding, monitoring, assessing, and reporting on painting and coating activities and items including but not limited to:· Vendor Product data sheet utilization· Proper application of paint and/or coating· Proper setup and use of holiday detector / jeep Requirements:· API 1169· OSHA 10 or OSHA 30 C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

If you are looking to be part of an engaging team and want to contribute to the success of a customer focused business operation, DC Fabricators, Inc. wants to talk with you! We offer competitive pay, benefits starting 1st of the month following hire date and a generous PTO accrual. DCF is a major supplier to the Navy Shipbuilding Program. Benefits: Offering 401(k), 401(k) matching, dental insurance, vision insurance, disability insurance, employee assistance program, health insurance, life insurance, paid time off, parental leave, retirement plan, and tuition reimbursement. Job Summary: This position is concerned with the performance of dimensional inspection and non-destructive examination of component parts in accordance with the established procedures, specifications, and drawing requirements. Essential Functions Statement(s)/Skills Required: * Perform inspections on all parts, assemblies, and fabrications as specified on drawings and job cards. * Set up assemblies and perform dimensional inspections using scales, tape measures, calipers, micrometers, hold micrometers and other precision gauging equipment. * Set-up non-destructive tests (NDT) on components. Experience in MT, PT, VT, RT, or UT, is a plus. Record results of the inspection and indicate disposition. * Work with customer representatives as necessary to review customer inspection points. * Maintain inspection records and documentation files for inspections performed. * Perform surveillance on material identification in the shop and in stores; insure segregation of scrap material from material in-process. * In receiving inspection, work closely with shipper and receiver to ensure that all requirements and specifications are met. * US Citizenship required at time of hire. SKILLS & ABILITIES Education: * High School Graduate, or the equivalent, with additional instruction in NDT and/or Dimensional Inspection. Completion of an apprenticeship program is desirable. Experience: * Minimum of two (2) years of NDE and/or Dimensional Inspection experience in an industrial/machine shop environment. * Minimum of two (2) years of Quality experience preferred. * Fabrication or Weld inspection experience preferred. * Blueprint reading knowledge preferred. * Email knowledge required. Computer Skills: * Computer skills required. Must have a working knowledge of ERP systems. US citizenship is required at time of hire. DC FABRICATORS INC. is an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Disabled/Sexual Orientation/Gender Identity Job Type: Full-time Pay: $52,000.00 - $60,000.00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Flexible spending account * Health insurance * Life insurance * Paid time off * Parental leave * Vision insurance Work Location: In person

Job Title: Manufacturing Quality Inspector Shift: 1st Shift Mon - Fri (7am - 330pm) About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are currently seeking a reliable and knowledgeable individual to join our Quality team. This role will be responsible for inspecting materials and products, providing quality support through knowledge of inspection procedures and tools, identify deviations, work with production team members to document non-conforming materials and communicate with engineering team within in a manufacturing facility. A Quality Inspector works with a team to ensure all products meet established quality standards. The ideal candidate is adaptable, a team player, a great communicator, and can meet deadlines and prioritize multiple projects. Responsibilities: Perform inspection on in-house and vendor-supplied parts and complete in-process inspections as required. Ability to use ESDS materials when working with electronic materials (i.e. wrist straps, grounded rubber mats). Operate Positive Material Identification (PMI) Gun to check materials against blueprints or drawings. Use Keyence measurement programming and CMM operation experience Interpret engineering drawings/specifications and geometric dimensioning and tolerancing (GD&T). Conduct process audits of assigned value streams focusing on adherence to standard work. Identify and document defects, deviations, or non-conforming items and processing defects. Perform final product inspection/verification before shipment for customer orders. Identify and report defects or issues in the assembly process and necessary adjustments or repairs to ensure product quality. Partake in the occasional inspection of soldering workmanship and electronic assemblies Perform quality checks by established quality procedures and ISO requirements. Collect samples of products or materials for testing and coordinate with the quality control laboratory if further analysis is required. Collaborate with team members to optimize workflow and achieve daily and monthly targets. Ensure inspection tools and equipment are properly calibrated and maintained and report issues. Maintain accurate records of inspection results, quality control data, and non-conforming products. Generate reports and documentation as required Inspect finished products for quality and adherence to specifications. Perform quality checks by established quality procedures and ISO requirements. Identify and report defects or issues in the assembly process and necessary adjustments or repairs to ensure product quality. Test and troubleshoot assemblies. Participate in training programs to improve maintenance skills and product knowledge. Attend monthly EHS trainings. Follow all policies and procedures (i.e. report on time and ready to work - Start/Lunch/Breaks). Participate in continuous improvement initiatives by suggesting process enhancements and participating in root cause analysis, writing the NCM, and disposing of waste accordingly (RTV, Scrap, Rework) Follow all safety guidelines, including wearing appropriate personal protective equipment (PPE). Test PSI limit no greater than 30,000. Report any safety hazards or incidents to supervisors promptly. Follow 5S principles (Sort, Set in order, Shine, Standardize, Sustain). Test PSI limit no greater than 30,000. Lift a maximum of 35 lbs for an individual and 70 lbs for a team lift. Maintain a clean and organized work area. Requirements: High School Diploma or GED 2+ years' experience in Manufacturing/Industrial Quality Inspection 1+ years of experience in Using Precision measuring tools and blueprints Core Competencies: Lifting: Must be able to lift up to 35 pounds occasionally with hoist to be used on objects over 40 pounds. Standing: Standing is required in periods of up to three hours at a time. Stooping: Would be required to lift objects off pallets Hand Dexterity: Must be able to work with hand tools, screws and gauges, as well as operating buttons on controls. Verbal Communication: Must be capable of clear communication between co-workers and supervisor. Carrying: Capable of carrying 40 pounds for a distance of up to 25 feet. Preferences: Ability to read and understand the bill of materials and work instructions, blueprints, or technical drawings Ability to operate precision tools such as micrometers, calipers, thread gauges, comparators, and others Demonstrated time management skills, strategic thinking, and adaptability Proficient computer knowledge (i.e. log on credentials (SSO), JD Edwards, and Microsoft Outlook, Word and Excel) Travel & Work Arrangements/Requirements: This position will be based at our site in Ivyland, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. APPLY NOW

ERM is hiring Inspectors to perform inspections of water service lines, and work in field teams of two to determine the service line material. Work will occur in properties throughout Northwest to Northern Philadelphia, PA (Upper Darby with Abington and Montgomery County next year). The projects we work on and the services we provide demand teams of multi-disciplinary professionals working collaboratively to meet our clients' needs. The role of an Inspector working within this program requires the use of multiple methods to perform detailed inspections of customer-side water service lines to identify the service line material. This is a part-time (20 hours/week), limited-term role for the duration of 4 months, renewable. RESPONSIBILITIES: Conducting field inspections to determine water service line material. Interacting with, and serving as a point of contact for ERM with landowners, contractors, clients, and other project team members. Reviewing and implementing project documents and data entry. Providing technical leadership, support, and direction to field staff. This includes the coordination of daily inspections, schedules, and meetings. Distributing water sampling test kits and contracts to landowners, as needed. Documenting service line material findings by preparing daily written inspection reports that provide up-to-date, consistent written and photo documentation of activities observed in the field. Participating in various meetings. Performing additional tasks as assigned or required. REQUIREMENTS: High School Diploma, GED, or equivalent. A basic understanding of building construction and the ability to locate a water meter/shutoff is preferred but not required. Necessary training will be provided. Strong oral and written communication skills. Proficient technical skills, including, but not limited to, experience using Microsoft Office programs, digital cameras, and other handheld data collection devices. The ability to travel overnight on temporary assignments with short notice. Must possess a valid Driver's License. Must be able to comply with ERM health and safety procedures, Must have a good driving record. Who We Are: As the largest global pure play sustainability consultancy, we partner with the world's leading organizations, creating innovative solutions to sustainability challenges and unlocking commercial opportunities that meet the needs of today while preserving opportunity for future generations. At ERM we know that creating a diverse, equitable and inclusive work environment is an essential part of making our company a great place to build a career. We also see our diversity as a strength that helps us create better solutions for our clients. Our diverse team of world-class experts supports clients across the breadth of their organizations to operationalize sustainability, underpinned by our deep technical expertise in addressing their environmental, health, safety, risk and social issues. We call this capability our “boots to boardroom” approach for its comprehensive service model that allows ERM to develop strategic and technical solutions that advance objectives on the ground or at the executive level. Please submit your resume and brief cover letter. Based on review of these responses, shortlisted candidates will be invited for interviews. ERM does not accept recruiting agency resumes. Please do not forward resumes to our jobs alias, ERM employees or any other company location. ERM is not responsible for any fees related to unsolicited resumes. ERM is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, gender identity, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Thank you for your interest in ERM!

Industrial Inspection & Analysis is searching for an ANSI Inspector located in Pennsylvania to join our Lifting Services team. The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure the heavy equipment is in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications Mechanically inclined. Basic knowledge of mechanical processes, movement, and assembly. Basic knowledge of hand tools. Proficient computer skills. Strong communication skills. Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution. Must be able to work independently with some direction from management. Problem solver, detail oriented. Job Requirements Able to stand, sit, squat, climb, crawl and twist for extended periods of time. Ability to lift up to 50 pounds. Must be punctual, accountable, and provide high quality customer service. Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays. Must have valid driver's license and be able to pass a background check and drug screen. We offer medical, dental, and vision benefits, a 401K plan, and paid time off and holidays.

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? **This is a 3rd shift opportunity: Monday to Friday (10pm-6am)** **What You Will Do:** + Visually inspects product and segregates nonconforming material and perform Solumina required job audits for Op Cert surveillance + May require occasional weekend work to support production schedule. + Perform OpCert over-inspects, as required. + Detailed inspection cert is required at the conclusion of training. + Adhere to all EH & S guidelines, including wearing of required personal protective equipment + Basic understanding of print tolerances including ability to interpret some GD&T, working knowledge of Op Cert functions and proficiency using precision measuring equipment + Meet vision requirements of NAS410 or internal equivalent **Qualifications You Must Have:** + HS Diploma or GED + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Qualifications We Prefer:** + 1 year manufacturing inspection experience **What We Offer:** + Medical, dental, vision and life insurance + Short-term disability, long-term disability and parental leave + 401(k) match + Flexible spending accounts + Employee assistance program + Employee Scholar Program (No waiting period!) + Paid time off including: 3 weeks of vacation with the option to purchase an additional week, 5 personal sick days, and 12 paid government holidays throughout the year **Learn More and Apply Now!** What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is Onsite. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. \#pwhourly **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? This is a 3rd shift opportunity: Monday to Friday (10pm-6am) What You Will Do: Visually inspects product and segregates nonconforming material and perform Solumina required job audits for Op Cert surveillance May require occasional weekend work to support production schedule. Perform OpCert over-inspects, as required. Detailed inspection cert is required at the conclusion of training. Adhere to all EH & S guidelines, including wearing of required personal protective equipment Basic understanding of print tolerances including ability to interpret some GD&T, working knowledge of Op Cert functions and proficiency using precision measuring equipment Meet vision requirements of NAS410 or internal equivalent Qualifications You Must Have: HS Diploma or GED U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Qualifications We Prefer: 1 year manufacturing inspection experience What We Offer: Medical, dental, vision and life insurance Short-term disability, long-term disability and parental leave 401(k) match Flexible spending accounts Employee assistance program Employee Scholar Program (No waiting period!) Paid time off including: 3 weeks of vacation with the option to purchase an additional week, 5 personal sick days, and 12 paid government holidays throughout the year Learn More and Apply Now! What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is Onsite. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. #pwhourly As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Full-time Description Since 1904, Nelson Miller Group (NMG) has been a leading global provider of custom solutions, partnering with organizations across industrial, IoT, lighting, medical, telecommunications, consumer, and aerospace and defense sectors. We bring complex products to life by solving intricate challenges in engineering design, manufacturing, and supply chain management. Our expertise spans Human-Machine Interface (HMI) solutions, value-added distribution, plastics, membrane switches, overlays, touch panels, electronics, metals, and cables. Our century-long legacy is built on a deep commitment to innovation, operational excellence, and unwavering customer satisfaction. These principles drive everything we do as we continue to grow and expand our global market presence. General Description Inspects molded and assembled product or parts for work quality, dimensional accuracy, conformance to drawings, internal specifications, and customer-supplied specifications using precision measuring and testing instruments and equipment. This individual is required to handle the day-to-day shift inspections and all measurement tools. Duties and Responsibilities Reads inspection logs and quality plans to determine mature and sequence inspection. Perform basic functions such as locating part specific programming, following fixturing outlines, and taking basic digital readout measures Reviews blueprints and product quality plans to locate critical dimensions and cosmetic criteria used during inspection. Inspects molded parts and assemblies during all phases of fabrication and assembly to ensure adherence to cosmetic and dimensional specifications. Measures parts and assemblies for dimensional accuracy using precision measuring instruments, templates, jigs, and fixtures. Accepts or rejects parts and assemblies, prepares documentation to record inspection results, and segregates unacceptable products. Confers with production and other personnel to coordinate the inspection process and to discuss inspection results. Inspects packaging of product to determine compliance with internal packaging instructions Inspects purchased parts, assemblies, accessories, and materials for conformance to specifications using precision measuring instruments and devices. Examines items for defects in materials, workmanship, and damage occurring in transit. Accepts or rejects purchased product, prepares documentation to record inspection results, and segregates unacceptable products. May prepare inspection procedure outlines for reference use in subsequent inspections using data obtained from blueprints, customer specifications, and catalogs. Assists machine operators in determining product quality conformance. Trains new and existing machine operators on operator tasks and product quality specific to each production item. Maintains a clean and orderly work area. Provides information and suggestions for improvement of product, processes, and the quality management system. May occasionally perform the duties of machine operator as directed by supervisor. All other duties as assigned. Qualification Requirements General: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and or ability required. Experience with vision systems (Keyence, OGP, Mitutoyo, and similar) required. Experience with hand tools (calipers, micrometers, height gages, and similar) required. Understanding of basic blueprint reading required. Education: High school diploma or general education degree (GED); and a minimum of one year manufacturing experience and/or training; or equivalent combination of education and experience. Experience with injection molding or plastics required. ASQ certification is a plus. Language Skills: Ability to write routine reports and correspondence. Ability to speak effectively to all employees of the organization. Ability to comprehend and comply with written and verbal procedures, instructions, and assignments. Ability to deal with situations involving several variables in standard manufacturing conditions. Ability to actively participate in group problem solving activities. Mathematical Skills: Ability to add subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to use ratios and percents. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Skills and Abilities: Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit and talk or hear. The employee is occasionally required to stand, walk, and use hands to finger, handle, or feel objects, tools, or controls. The employee must frequently lift and or move up to 10 lbs. and occasionally lift and or move up to 25lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is exposed to humid conditions. The noise level in the work environment is usually moderate. Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3). Candidates being considered for hire must pass a pre-employment background check. Compensation and Benefits: Pay Range: $17.50/hr - $24.00/hr (Pay to be determined by the experience, knowledge, skills, and abilities of the candidate, and alignment with market data) Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, short-term and long-term disability insurance; voluntary supplemental insurances, flexible spending accounts and employee assistance program (EAP). Sick Leave, Vacation Time, and company-paid Holidays are also provided as paid time off. Nelson Miller Group also provides a 401(k) Retirement Savings Plan option with a safe harbor non-elective company contribution. Nelson Miller Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law. Salary Description $17.50/hr - $24.00/hr

Essential Job Functions/Responsibilities Adherence to safety procedures/guidelines at all times; maintain safety precautions at all times. Keep work area in a clean and orderly condition. Perform receipt and in-process inspections on material purchased by Holtec or supplied by Holtec's customers for use in fabrication; document and/or record inspection results; report results as required. Familiar with the basic inspection tools and equipment (calipers, scales, micrometer, “go-no-go” gauges, thread gauges, tape measure, etc.) and have demonstrated proficiency in their use. Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved. Capable of assisting production in the set-up of material and/or components for receipt inspection as required. Reviewing of Certified Material test Reports and verifying conformance to purchase order requirements. Record time on proper forms. Perform audits/surveillances as required by management. Other duties as assigned Physical Demands & Abilities May be required to work at heights and/or in confined spaces. May work alone with minimal supervision or with other personnel. Will work in various areas of the plant location. Dependent upon the area, environmental conditions may be hot, cold, dirty, greasy, wet and/or noisy. Ability to walk, climb, crawl, bend, crouch, and use ladders. Required and Preferred Qualifications High school diploma or equivalent required Minimum of 1 year prior experience performing dimensional inspections and using measuring tools (calipers, scales, micrometer, “go-no-go” gauges, thread gauges, tape measure, etc.) required. Understanding of GDT (Geometrical Dimensioning and Tolerancing) required.

Manufacturing Quality Inspector BH Job ID: 3365 SF Job Req ID: 15972 Job Title: Manufacturing Quality Inspector Shift: 1st Shift Mon - Fri (7am - 330pm) About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are currently seeking a reliable and knowledgeable individual to join our Quality team. This role will be responsible for inspecting materials and products, providing quality support through knowledge of inspection procedures and tools, identify deviations, work with production team members to document non-conforming materials and communicate with engineering team within in a manufacturing facility. A Quality Inspector works with a team to ensure all products meet established quality standards. The ideal candidate is adaptable, a team player, a great communicator, and can meet deadlines and prioritize multiple projects. Responsibilities: * Perform inspection on in-house and vendor-supplied parts and complete in-process inspections as required. Ability to use ESDS materials when working with electronic materials (i.e. wrist straps, grounded rubber mats). Operate Positive Material Identification (PMI) Gun to check materials against blueprints or drawings. Use Keyence measurement programming and CMM operation experience * Interpret engineering drawings/specifications and geometric dimensioning and tolerancing (GD&T). Conduct process audits of assigned value streams focusing on adherence to standard work. Identify and document defects, deviations, or non-conforming items and processing defects. * Perform final product inspection/verification before shipment for customer orders. Identify and report defects or issues in the assembly process and necessary adjustments or repairs to ensure product quality. Partake in the occasional inspection of soldering workmanship and electronic assemblies Perform quality checks by established quality procedures and ISO requirements. * Collect samples of products or materials for testing and coordinate with the quality control laboratory if further analysis is required. Collaborate with team members to optimize workflow and achieve daily and monthly targets. Ensure inspection tools and equipment are properly calibrated and maintained and report issues. * Maintain accurate records of inspection results, quality control data, and non-conforming products. Generate reports and documentation as required * Inspect finished products for quality and adherence to specifications. Perform quality checks by established quality procedures and ISO requirements. Identify and report defects or issues in the assembly process and necessary adjustments or repairs to ensure product quality. Test and troubleshoot assemblies. * Participate in training programs to improve maintenance skills and product knowledge. Attend monthly EHS trainings. Follow all policies and procedures (i.e. report on time and ready to work - Start/Lunch/Breaks). Participate in continuous improvement initiatives by suggesting process enhancements and participating in root cause analysis, writing the NCM, and disposing of waste accordingly (RTV, Scrap, Rework) * Follow all safety guidelines, including wearing appropriate personal protective equipment (PPE). Test PSI limit no greater than 30,000. Report any safety hazards or incidents to supervisors promptly. Follow 5S principles (Sort, Set in order, Shine, Standardize, Sustain). Test PSI limit no greater than 30,000. Lift a maximum of 35 lbs for an individual and 70 lbs for a team lift. Maintain a clean and organized work area. Requirements: * High School Diploma or GED * 2+ years' experience in Manufacturing/Industrial Quality Inspection * 1+ years of experience in Using Precision measuring tools and blueprints Core Competencies: * Lifting: Must be able to lift up to 35 pounds occasionally with hoist to be used on objects over 40 pounds. * Standing: Standing is required in periods of up to three hours at a time. * Stooping: Would be required to lift objects off pallets * Hand Dexterity: Must be able to work with hand tools, screws and gauges, as well as operating buttons on controls. * Verbal Communication: Must be capable of clear communication between co-workers and supervisor. * Carrying: Capable of carrying 40 pounds for a distance of up to 25 feet. Preferences: * Ability to read and understand the bill of materials and work instructions, blueprints, or technical drawings * Ability to operate precision tools such as micrometers, calipers, thread gauges, comparators, and others * Demonstrated time management skills, strategic thinking, and adaptability * Proficient computer knowledge (i.e. log on credentials (SSO), JD Edwards, and Microsoft Outlook, Word and Excel) Travel & Work Arrangements/Requirements: This position will be based at our site in Ivyland, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond.

Industrial Inspection & Analysis is searching for an ANSI Inspector located in Pennsylvania to join our Lifting Services team. The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure the heavy equipment is in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications Mechanically inclined. Basic knowledge of mechanical processes, movement, and assembly. Basic knowledge of hand tools. Proficient computer skills. Strong communication skills. Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution. Must be able to work independently with some direction from management. Problem solver, detail oriented. Job Requirements Able to stand, sit, squat, climb, crawl and twist for extended periods of time. Ability to lift up to 50 pounds. Must be punctual, accountable, and provide high quality customer service. Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays. Must have valid driver's license and be able to pass a background check and drug screen. We offer medical, dental, and vision benefits, a 401K plan, and paid time off and holidays.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? This is a 3rd shift opportunity: Monday to Friday (10pm-6am) What You Will Do: * Visually inspects product and segregates nonconforming material and perform Solumina required job audits for Op Cert surveillance * May require occasional weekend work to support production schedule. * Perform OpCert over-inspects, as required. * Detailed inspection cert is required at the conclusion of training. * Adhere to all EH & S guidelines, including wearing of required personal protective equipment * Basic understanding of print tolerances including ability to interpret some GD&T, working knowledge of Op Cert functions and proficiency using precision measuring equipment * Meet vision requirements of NAS410 or internal equivalent Qualifications You Must Have: * HS Diploma or GED * U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Qualifications We Prefer: * 1 year manufacturing inspection experience What We Offer: * Medical, dental, vision and life insurance * Short-term disability, long-term disability and parental leave * 401(k) match * Flexible spending accounts * Employee assistance program * Employee Scholar Program (No waiting period!) * Paid time off including: 3 weeks of vacation with the option to purchase an additional week, 5 personal sick days, and 12 paid government holidays throughout the year Learn More and Apply Now! What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is Onsite. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. #pwhourly As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms