Inspector jobs in Appleton, WI

Job Details Little Chute, WIDescription API 510, 570, 653 Inspector At the direction of the client, perform visual and non-destructive examinations of static and dynamic pressure retaining equipment in accordance with American Petroleum Institute (API) standard 570 and the American Society of Mechanical Engineers (ASME). Submit to client technically accurate reports documenting equipment condition. Provide client with technical recommendations for the repair, re-rate, replacement, and/or alteration of plant equipment, as required for safe operation within stated operating parameters for durations specified by client. Provide technical input to client as required for welding and metallurgical issues. Provide technical guidance, on an application of non-destructive examination techniques and procedures. Fully comply with all Xcel NDT and client safe work practices and actively participate in all site safety initiatives. Qualifications One of more API Certifications - API 510/570/653 Physical Demands and Work Conditions * Standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling, fingering, feeling, talking, hearing, visual acuity, accommodation and color vision * Moving, carrying, lifting, objects in excess of 50 lbs * Climbing and working off of ladders, stairs, and scaffolding in excess of 100 ft * Working extended hours and standing for extended periods of time * Work in indoor and outdoor environments in conditions of extreme heat and cold * Work in and near industrial hazards.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Job Description Lift Solutions offers complete industrial lifting solutions - including OSHA compliance inspections, crane equipment, aftermarket parts, and services for overhead cranes and rigging systems. Our mission is to drive progress and efficiency through cutting-edge technology, expert service, and an unwavering commitment to safety and sustainability. We are currently seeking a Rigging Inspector to join our team in Neenah, WI. Position Summary: Inspectors are responsible for performing detailed onsite inspections and consulting directly with clients to ensure that all equipment, systems, and practices comply with ANSI and other applicable standards and regulations. They assess compliance, document findings, and provide expert guidance to help clients maintain safety, quality, and regulatory adherence. Job Responsibilities: Performing at customer site or in-house compliance inspections of customer assets including hoist, sling, and rigging hardware. Preform prework hazard analysis, implement hazard controls to maintain a safe work area. Consult with customer regarding all repair and safety related issues and discuss recommendations that will assist the customer with improving their material handling applications, prior to leaving job site. Determine items requiring quotation. Complete and provide proper electronic documentation utilizing the established company digital tools required for each service, obtaining the customer's signature and acceptance. Generate sales leads during service calls and report to service office, following established guidelines. Read, understand and apply the contents of all OSHA, ANSI, CMAA and other codes or regulations pertaining to our industry. Refresh and update knowledge periodically. Complete service reports and other required and appropriate documents in a professional, accurate, neat and legible manner and submit it in a timely manner and in accordance with established guidelines. Maintain all company issued equipment, vehicle and assets in a safe and proper working order. Operate tools, equipment and vehicles in a safe and responsible manner. Notify supervisor of any deficiencies for resolution. Maintain supply of forms, literature, inventory and miscellaneous materials in the service vehicle. Document use or sale to customer, as required. Follow all established safety rules and procedures, including those established by the customer. Maintain company vehicle and uniforms in a clean and presentable manner. Job Requirements/Qualifications: High school diploma or Equivalent Excellent written and oral communication skills Computer and mobile application proficiency Math aptitude, attention to detail and sense of urgency Self-directed and customer focused Mechanically inclined Ability to lift 75 - 100 pounds Willing to travel Valid Class C driver's license (Clear DMV driving record). Prior experience with cranes and rigging is a plus.

Since 1982, Sigma Engineered Solutions has been on an incredible journey. We started with just one plant in India and have expanded to 13 locations around the world. What began as a cost-effective supplier of low-voltage electrical products has grown into a global solutions provider of highly engineered, complex metal components, including machined parts and precision metal stampings. At Sigma Engineered Solutions “your success is our mission.” It's a promise we live by daily and it defines everything we do whether you are a team member or customer. Our Final Inspectors are responsible for inspecting finished metal products to ensure conformance with work orders and customer specifications, under the direct supervision of the Production Supervisor. What you will be doing: Read work orders or production schedules to determine specifications, such as part number, number of molds to inspect and the appropriate procedure to follow. Examine work pieces for defects and sort defective pieces according to types of flaws to scrap out the parts. Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, or measuring instruments required. Approve finished products by confirming specifications as per the blueprints; conducting visual and measurement tests; returning products for re-work; confirming re-work. Measure dimensions of products to verify conformance to specifications, using measuring instruments such as certified rulers, calipers, pin gauges, job blocks, micrometers, or CMM. Compare shape, texture, or grade of product or material with the chart, template, or sample to ensure consistency. Record inspection or test data, such as weights, temperatures, grades, or moisture content; and quantities inspected or graded; the type and quantity of defective castings; and total number ready to be shipped by completing reports and logs; summarizing re-work and waste; inputting data into quality database. Finish the assigned work in the allotted time and maintain the production levels. Feed the number and types of parts worked on in the ERP system using the routers. Place scrap castings in assigned carts as instructed by the supervisor. Report problems or concerns with quality, processes, equipment, materials and labor to Production Supervisor. Report any accident related to person, equipment, material or any other to the Production Supervisor as soon as possible. Follow standard operating procedures (SOPs) as instructed by the supervisor. Follow documented policies and procedures as designated by the company's Employee Handbook and adhere to proper code of conduct while in the company property. Perform all work in a safe and efficient manner and comply with safety regulations and maintain clean and orderly work areas. Ensure work meets quality standards and is performed according to established procedures. Perform other tasks as directed by your supervisor, all other duties as assigned. Basic Math Knowledge is required. Requirements What you will bring to the team: High School Diploma or equivalent is preferred. Previous work-related skill, knowledge, or experience is required. Must have at least one year of manufacturing experience. Basic mathematical, grammatical, and arithmetic skills required. Thorough understanding of mechanics and other properties of machines. Ability to follow written instructions, diagrams, and blueprints. Ability to follow proper safety protocols. Ability to determine whether machinery is working properly based on specifications for expectations such as fixtures, cutting speeds, or feed rates. Must be able to work in noisy environments. Must be able to lift up to 30 pounds, unassisted at times. Must be able to bend, stretch, squat, and climb to access all parts of the machine. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. At Sigma Engineered Solutions our vision is to be the global partner of choice by exceeding customer expectations. Our team members are essential to our customers success, and we look for these qualities when adding members to our team: · exemplary honesty and integrity · customer focused · strive for continuous improvement in all they do · are courageous and trustworthy · are committed to teamwork · are socially and environmentally responsible · act proactively in the best interest of all stakeholders If you share these qualities and you feel your background is not a perfect fit for a job, we encourage you to apply! Your background may have a telling story that makes you a better fit than you realize. We are hard at work to make sure our people are taken care of and our benefits meet their needs. What does this look like? Competitive pay Health coverage Paid time off allowances Employee Assistance Program Salary Description $21.00/hour

Job DescriptionTitle: Quality Control / Certified Welding Inspector (CWI) Division: Enerpipe Direct Report: Quality Manager Company Profile Enerpipe is a subsidiary of Enerfab, a privately held fabrication, construction, and maintenance services company based in Cincinnati, Ohio. For over 120 years, Enerfab has served a wide range of industries-including food and beverage, chemical, pharmaceutical, and energy-throughout the United States. The Quality Control / CWI will be a key member of the Quality Department, working closely with the Quality Manager, QC Supervisor, and Shop Foreman/Supervisor. The ideal candidate is detail-oriented, self-motivated, ethically sound, and committed to maintaining high standards of welding and fabrication quality. This individual will conduct inspections, review procedures, and support the Quality team in ensuring compliance with codes, customer specifications, and internal standards. Primary Responsibilities Perform inspections to determine if weldments meet acceptance criteria per applicable codes, standards, or customer specifications (ASME, AWS, API, or project-specific requirements). Conduct visual inspection of completed work and recommend repairs when necessary. Review Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and welder qualification records, including bend testing. Perform dimensional measurements and fit-up inspections for piping and components. Read and interpret job specifications, shop drawings, and fabrication plans to ensure proper layout, fit up, and weldment quality. Prepare detailed, accurate inspection reports and maintain organized documentation and filing systems. Establish and maintain effective working relationships with management, production, and other employees. Promote a culture of safety by understanding occupational hazards and adhering to safety precautions in a pipe fabrication environment. Provide guidance and mentorship to welding personnel and less-experienced inspectors. Collaborate with production, engineering, and management to resolve welding or quality-related issues. Assist with audits, continuous improvement initiatives, and other related duties as assigned. Required Qualifications & Experience Certified Welding Inspector (CWI) certification preferred; active AWS CWI strongly preferred. 3-5+ years of experience as a CWI or equivalent experience in welding inspection, QC, or fabrication. Hands-on welding experience and/or supervisory experience strongly preferred. Familiarity with ASME B31, ASME BPVC Section VIII, and Section IX is a plus (not required). Understanding of Weld Procedure Specifications (WPS), filler metal selection, and welder qualification testing. Experience with dimensional measurement for piping systems. Knowledge of welding techniques for carbon steel, stainless steel, and alloys, including FCAW, SMAW, GTAW, GMAW, and SAW. Proficient in Microsoft Office applications, particularly Excel and Word, with general computer and email proficiency. Strong attention to detail, ethical standards, and self-motivation. Effective verbal and written communication skills. Ability to work collaboratively, be proactive, and assist the Quality team when needed. Preferred Qualifications ASNT SNT-TC-1A NDT Level II certification in one or more methods: Radiographic Testing (RT) Ultrasonic Testing (UT - Shear Wave preferred) Penetrant Testing (PT) Visual Testing (VT) Previous supervisory or leadership experience in QC or welding inspection. Experience with quality audits, process improvement, and continuous improvement initiatives. Education & Training High school diploma or equivalent required. Additional formal training or certifications in welding, inspection, or quality systems is a plus. Physical & Work Environment Requirements Ability to lift, bend, and perform inspections in a pipe fabrication environment. Comfortable working in varied environments, including elevated areas, confined spaces, and around active fabrication operations. Reasonable accommodations available for qualified individuals with disabilities. Enerpipe is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Powered by JazzHR sUCwBGhntr

Job DescriptionDescription: Department: Quality Assurance Employment Type: Full-Time Regular FLSA Classification: Hourly, Non-Exempt Reports To: FSQA Supervisor Travel Requirements: 10% Shift: Weekend (Friday - Sunday) Role Summary: An FSQA Inspector is responsible for upholding the highest standards of food safety, quality, and regulatory compliance in all pet food products. This role plays a vital part in protecting the health and well-being of pets by carefully monitoring, evaluating, and verifying every stage of the manufacturing process - from raw material selection to final product packaging. By ensuring strict adherence to regulatory requirements, internal quality systems, and customer specifications, the FSQA Inspector helps maintain product integrity and fosters consumer trust in our brand. Role Responsibilities and Essential Functions: Quality Control Conduct routine inspections and audits of raw materials, in-process products, and finished goods to ensure compliance with quality and safety standards. Perform laboratory tests and analyses to identify contaminants or deviations from established specifications. Evaluate and test products in accordance with the Quality Plan to verify conformance to requirements. Place nonconforming products on physical hold and communicate findings to relevant personnel. Collaborate with production teams to identify root causes and implement corrective actions for quality issues. Collect raw material samples from production for laboratory testing. Conduct visual and swab-based pre-operational verifications of sanitation activities and initiate corrective or preventive actions when needed. Monitor employee hygiene practices and communicate any noncompliance to appropriate staff. Perform audits of glass and brittle plastic controls. Verify scale weights and oxygen analyzer accuracy according to established schedules. Serve as the primary quality and food safety contact on the production floor. Report any FSQA system issues to leadership and ensure compliance with all FSQA standards. Regulatory Compliance Ensure full compliance with FDA, USDA, AAFCO, and other applicable regulatory and industry standards. Stay current with evolving regulations and proactively implement required process or documentation updates. Process Monitoring Oversee production processes from ingredient receipt through packaging to identify potential food safety or quality risks. Partner with production teams to implement corrective and preventive measures and drive continuous process improvement. Documentation and Reporting Maintain accurate and timely records of inspections, tests, and other quality assurance activities. Prepare detailed reports on product quality, safety, and compliance for management review. Accurately enter and manage data within applicable computer systems. Training and Development Train production and support staff on quality assurance protocols, sanitation practices, and food safety procedures. Develop, update, and communicate standard operating procedures (SOPs) and training materials. Continuous Improvement Participate in cross-functional initiatives to identify and implement opportunities for product and process improvement. Recommend and support actions to enhance quality, food safety, and operational efficiency. Additional Responsibilities Replenish sanitation and personal hygiene supplies throughout production areas as needed. Collaborate with production personnel and the FSQA Supervisor to make decisions in the best interest of the organization. Act as a proactive advocate for food safety, product quality, and continuous improvement across all departments. All other duties as assigned. Requirements: Education and Experience: High School Diploma or Equivalent (required) Experience in quality assurance or quality control within the food manufacturing industry (preferred) Knowledge of HACCP, GMPs, and other food safety and quality standards (preferred) Comfortable Working in a Fast-Paced, Hands-On Environment Skills and Abilities: A successful FSQA Inspector will have: Detail-oriented with solid analytical and problem-solving skills. Effective communicator able to work collaboratively across teams. Proficient in laboratory testing, data recording, and basic computer systems. Organized, adaptable, and committed to maintaining product safety and quality. Physical Requirements: The physical demands must be met with or without accommodation for an employee to be successful in performing the essential job functions of this role. This position requires standing and walking for most of the workday, often on hard surfaces within a production environment. The position involves frequent bending, reaching, and moving between different areas of the facility. The ability to repeatedly lift, carry, and move items weighing up to 40 pounds is essential. Additionally, the role may require working in varying environmental conditions, such as heat, cold, or humidity. The inspector must also be comfortable wearing personal protective equipment (PPE), including gloves, hairnets, ear protection, and safety footwear.

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Brown, Calumet, Door, Kewaunee, Manitowoc, Outagamie, Winnebago Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for QA Inspectors, Fixed Equipment (contract). Work will be assigned on a as needed basis and the contractor will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: * The scope of work includes ensuring that mechanical and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify results of FAT, Hydrotest non-destructive tests, etc. * Monitoring welding parameters, and inspecting materials and equipment. * Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. * Verify that welders are qualified and that welding procedures and specifications (WPS) are followed correctly. * Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. * Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. * Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. * Witness Hydrotest, FAT, non-destructive testing (NDT) and interpret / verify results. * Visual inspection on the quality of welding and mechanical projects. * Ensure that materials, equipment, and safety regulations are followed. * Prepare detailed reports documenting inspection results, including any issues found. Qualifications * Must have API 510, AWS / CWI / CSWIP * Minimum of five (5) years Fixed Equipment inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. * Must have a minimum of 5 years of Oil and Gas Experience. * Must be able to demonstrate knowledge of fixed equipment inspections. * Must have welding inspections experience at manufacturer shops / facilities. * Mechanical / welding inspection experience of Pressure vessels, Heat Exchangers, Tanks, Valves, etc.. would be an asset. * Hours of work: Up to 8 or 10 hours a day, usually Monday to Friday subject to inspection scope requirement * Work Schedule: Depending on the project requirement. This is not a permanent full time position. It is contract work and we contact you when we have a request for an inspection. * If inspection site is beyond round trip 300 miles from Inspector place of residence then per diem could be applicable (client prior approval is required) * Hourly rate: $42 to $48/hr. + $0.70 / km * Must be eligible to work in the USA. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability. #IND

The position is responsible for inspection, enforcement, compliance, education and investigation work for the Weights and Measures/Petroleum Inspection program. This position provides highly technical field education, training and consultation to regulated businesses and the general public using knowledge of petroleum products, tank systems, weights and measures requirements and Division protocols. Full Position Description Salary Information The classification of this position is Weights & Measures Petroleum System Specialist - Entry, which is in schedule-range 05-63 with pay between $27.00 - $33.00 per hour based on qualifications. This position is not represented by a collective bargaining unit. A 12-month probationary period is required. Pay for current state employees will be set in accordance with the State Compensation Plan at the time of hire. Job Details At DATCP, we strive to deliver efficient and effective programs and services to Wisconsin agriculture, consumers, and businesses. The Department has numerous on-the-job training (OJT) opportunities, unique to each Bureau. These OJT opportunities include direct experience and practice through collaboration with co-workers/supervisor, peer mentoring, and job-specific training modules. This position will be provided the opportunity to obtain the Storage Tank Inspector Certification and Class B Commercial Driver's License. Conditions of Employment: DATCP does not sponsor work visas. Any appointment made will be contingent on the selected applicant being able to provide documentation of eligibility to work in the United States. A criminal background check will be performed on the selected applicant prior to an offer of employment. A valid driver's license and the eligibility to drive a State of Wisconsin Fleet Vehicle* is required. * In order to be authorized to drive a State vehicle the candidate must meet the requirements of the State of Wisconsin Fleet Vehicle Policy, which are: * Must have a valid driver's license; * Must have a minimum of two years of licensed driving experience; * Must be 18 years of age. Additionally, your driving record MUST NOT reflect any of the following conditions: * Three or more moving violations and/or at-fault accidents in the past two years; * Operating While Intoxicated (OWI)/Driving Under the Influence (DUI) citation within the past 12 months; * Suspension or revocation of driver's license. Ability to obtain and maintain a commercial driver's license (CDL) within 12 months of employment is required. More information on obtaining a CDL can be found by clicking here. * Employment is contingent on successful completion of a pre-employment/safety-sensitive function screening (per Federal Drug & Alcohol Testing regulations). Completion of this screening will be prior to employment or at time of attaining CDL license. Ability to obtain and maintain Storage Tank Inspector Certification is required. Ability to lift up to 50 lbs. is required. Ability to stand and walk for extended periods of time (up to 8 hours per day), often on wet or uneven surfaces, is required. Working outdoors is required 12 months of the year and conditions frequently are dusty, dirty, and may be hazardous. Travel of up to 80% throughout assigned region, and occasional travel outside of assigned region, is required. Qualifications Minimally qualified candidates will have each of the following: * Training and/or experience related to technical science, math, process control, business, engineering field work or similar. * Experience working independently at a worksite and/or in a remote field position (i.e., performing repairs and/or installation at various work sites, managing and/or coordinating own workload assignments, self-scheduling for assigned customer contacts, etc.). * Experience working with Microsoft Access and Excel or similar programs. In addition to the minimum qualifications above, highly qualified candidates will have one or more of the following: * Experience working in a regulatory field (weights and measures, petroleum or other chemical or liquid products, storage tank systems, commercial measuring devices, packaged commodity and pricing requirements, etc.). * Experience interpreting technical data, complex codes, blueprints and/or standards and the ability to explain them to a wide variety of internal and external stakeholders. * Experience conducting inspections (ensuring compliance of systems and businesses via review of records, obtaining compliance through education or higher enforcement actions, etc.). * Experience analyzing and interpreting state or federal regulations. How To Apply If viewing this posting on an external site (such as indeed.com, etc.), please visit Wisc.Jobs and search for this Job ID: # 19476 to complete your application for this posting. DATCP is an Equal Opportunity and Affirmative Action employer seeking a diverse and talented workforce. Veterans, women, people of color, LGBTQIA+, and people with disabilities are encouraged to apply. We provide reasonable accommodations to qualified applicants and employees with disabilities. The State of Wisconsin offers a special program for qualified veterans with a 30% or greater service-connected disability. If you are a qualified veteran, please visit the Veterans Employment page for application instructions to be considered for the Veterans Non-Competitive Appointment program. For complete information on veterans hiring programs that may benefit you, please visit the Employment page on WDVA's website. To be considered for this position, you will need to create an account (if you don't already have one) and apply online via the "Apply for Job" button listed on the top right of the job posting page. You will be required to upload a current resume and a letter of qualifications that clearly describes your qualifications and experience as they relate to the qualifications listed in this job posting. Review the applicant resources, including tips on how to write a resume and letter of qualifications. Submitted application materials will be evaluated by one or more job experts. Candidates who are deemed eligible will be invited to participate in the next step of the selection process, starting with those candidates who are deemed most qualified. For general Wisc.Jobs user information and technical assistance, please check the Frequently Asked Questions. Please address questions regarding the application process to Varinderjit Kaur at *******************************. Deadline to Apply The deadline to apply for this position is 11:59 p.m. on Monday, January 5th, 2026.

In our proprietary lab in De Pere, WI, we manufacture quality eyewear for our eye care center patients at over 145 locations across the North and Midwest. With a focus on continuous improvement, we are always looking for motivated and innovative people that want to help us optimize the production and distribution of this process. As part of our manufacturing team, you will have access to state-of-the-art lens processing and finishing equipment to efficiently produce high-quality eyewear to keep our patients seeing their best. Enjoy on-the-job training in a clean and comfortable work environment and benefits including a fixed schedule working 1 st or 2 nd shift, 401k with match, and paid time off. 2ndShift - QA Inspector $500 Sign On bonus Starting pay is $18.50/hour, 4 Day Workweek! Are you looking for an opportunity to work in a progressive manufacturing environment where your work means bringing clear sight to our patients? Shopko Optical is seeking 1st Shift QA Inspector to join our team at our manufacturing facility in De Pere, Wisconsin. POSITION SUMMARY: Perform final inspection of lenses, frames and eyewear to ensure they are optically and cosmetically accurate. Validate all orders meet Shopko and ANSI standards and match to the prescription specifications. Taking Care of our Teams who Take Care of our Patients Competitive Wages, plus Production and Attendance pay Incentives 401K with Match Vacation Pay/Personal Day Volunteer Time Off Sick Pay for Hourly Teammates Health & Wellbeing Benefits Voluntary/Cafeteria Offerings Employee Assistance Program On the Job Training & Certification Teammate Recognition Program DUTIES AND RESPONSIBILITIES: INSPECTION AND VALIDATION • Inspect lenses to ensure they are optically and cosmetically accurate ensuring all work meets Shopko and ANSI standards • Identify prism, axis, checking for power, checking optics, bench alignment and defects. Communicate defects appropriately • Ensure optical accuracy by validating power, prism, axis, PD-s, seg height, lens fit and cosmetic add-ons • Read the work ticket to verify prescription instructions such as tints, powers, adds coatings, tints, prism, special instructions PROCESS IMPROVEMENT • Partner with production team and support areas to identify breakages and look for resolution to improve quality and service to our customers • Assist Production Lead - Finish and/or Production Manager - Finish with tracking defects or fixers in order to improve quality and training • Use problem solving techniques to proactively address patterns of concern. Elevate to Production Manager - Finish for resolution when appropriate • Partner with teammates, leads and managers when opportunities are identified for continuous improvement and offer recommendations for implementation MAINTAIN SAFE WORK ENVIRONMENT • Follow all company and lab policies and guidelines • Adhere to safety guidelines and OSHA regulations • Ensure machines are operating effectively and safely • Ensure orders are fabricated only if a work ticket is provided • Fabricate all orders in accordance with ANSI and company standards • Perform stretching before reporting to workstation MINIMUM KNOWLEDGE, EXPERIENCE & SKILLS REQUIREMENTS: • High School Graduate or equivalent • Shopko OCE Certification required within 12 months of hire/transfer/promotion. ABO Certification desirable • Minimum of 3-5 years previous related experience in optical (eyewear) manufacturing or optical retail setting • Professional written and oral communication skills • Interpersonal skills • Computer skills (Microsoft Office, Outlook, data entry, etc.) • Ability to problem solve in a professional manner and timely fashion • Analytical and decision-making skills • Self-motivated and detail oriented • Ability to multi-task and prioritize ESSENTIAL FUNCTIONS & WORK REQUIREMENTS: • Ability to effectively communicate at all levels within the organization through written and two-way verbal communication • Able to read and write at a high school graduate level • Able to sit or stand for extended periods of time • Able to operate various Optical Lab equipment and office equipment • Demonstrate physical agility (bending, climbing, twisting, squatting, lifting, pushing, reaching, etc.) on a repetitive basis • Ability to lift an average of 25 pounds on a repetitive basis • Ability to see (Near, Distance, Color, and Depth Perception) • Manual and finger dexterity, as well as hand/arm steadiness • Ability to grip and hold items • Good eye and hand coordination • Ability to work in a fast-paced production environment • Able to work normal and/or extended (evenings, nights, and weekends) office hours to meet established deadlines • Able to travel independently to support Company objectives and personal development These statements are intended to describe the general nature and level of work performed by teammates assigned to this job classification. They are not intended to be an exhaustive list of all responsibilities, duties and skills required.

Bassett Mechanical is a 3rd generation family-owned company that provides custom-built industrial refrigeration, HVAC, plumbing, metal fabricating and preventative maintenance service solutions to customers throughout the United States and the world. It is not only a great place to grow and thrive in your career. It is a place to truly belong. As a member of the Bassett Mechanical Team, you'll enjoy a competitive compensation and benefits package and many professional growth opportunities. From the moment you're hired, to the day you retire, you're a part of our Bassett Mechanical Team. Position Purpose The purpose of this position is to verify specific functions are being carried out in accordance with the prescribed work package and customer specifications. This position will work in conjunction with engineering department, project management and shop foremen. This role reports to the Lead Quality Control Inspector. Position Responsibilities * Material verification and testing and support material control system as required. * Maintain welder certification log, welder continuity. * Blast/Paint inspection * Quality check "in-process" work (i.e.: fit-up and weld quality checks.) * Visual inspection of joint preparation, Initial Root Pass and final welds. * Verify welding procedure is being followed * Verify welding personnel are qualified * Final dimensional inspection * Witness and perform Non-Destructive Testing * Assemble components of the final data package as directed by the Lead Quality Control Inspector * Maintain accurate documentation as required by the quality system (traveler, ITP, material log etc.) * Issue NCR's when required and propose corrective action. * Work closely with production staff to resolve quality issues * Qualify welding personnel to AWS/ASME code and prepare certifying documentation. * Support and maintain a Lean work environment * Other tasks as assigned by the Lead Quality Control Inspector Summary of Skills, Knowledge and Abilities * Experience as a Quality Control professional in an ASME/AWS code fabrication environment * Ability to read, interpret, and apply client and code specifications and determine fabrication requirements from the specifications * Knowledge of weld processes and fabrication techniques used in structural and pressure component fabrication * Ability to read and understand AWS, and ASME welding procedures and supporting procedure qualification records for the applicable fabrication * Prior background applying non-destructive examination methods is desirable * Technical school degree with equivalent experience in an AWS/ASME code fabrication environment preferred * Working knowledge of calipers, tape measures etc. and the ability to make metric conversions * Advanced Blueprint reading skills * Skilled with computers and Microsoft applications (word, excel, etc) * Written and verbal communication skills * Understanding of welding and machining symbols * CWI with AWS D1.1 certification is preferred Direct Reports * None

We have immediate hiring needs for Inspectors to join our U.S based Engineering Team! This position is a full-time permanent opportunity with excellent benefits, company vehicle and paid time off. We specialize in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, erected and/or repaired. The work of our Inspection and Engineering Services personnel is focused on the beginning of the life cycle. Services include: Review and acceptance of Job Packages In-process Inspections Monitoring of Quality Control System Witnessing final Hydrostatic Test Review and signing of required forms This field based position is an integral part of our commitment to the quality and service we provide for our customers and to their equipment. The work is varied from day to day and is ideally suited to a self-motivated individual who can work independently. A successful inspector will have excellent communications skills and the ability to work with clients and customers in a professional manner with high integrity. Qualifications Required: Experience on High Pressure Boilers Experience operating, maintaining, or inspecting boilers and pressure vessels. ASME & NBIC Code Knowledge Meet RCI-1 Requirements to qualify for AI/RI examinations and Commission qualifications State Certificate of Competency and National Board of Boiler and Pressure Vessel Inspectors Commission, with “A” Endorsement. Preferred: **Prior Navy Nuclear candidates are highly encouraged to apply** Experience with boilers and pressure vessels. Risk Survey experience N.B. of Boiler and Pressure Vessel Inspectors Commission

Job Details Little Chute, WIDescription The Certified Welding Inspector (CWI) is responsible for inspecting parts and assemblies for nonconformities, acceptability and accuracy to drawings and/or customer requirements, using multiple methods per regulatory, customer, and internal requirements. Candidates for this role should have a working knowledge of all inspection equipment, roles and processes such as visual inspection, hydrostatic and various NDE methods. The CWI will be responsible for helping to detect the root cause of Quality issues as well as keeping track of Quality documentation. The CWI must have applicable knowledge of ASME, AWS, API, and ISO standards and must have a current certification. Duties and Responsibilities Performs internal testing, internal checks, and cosmetic inspections. Perform inspections on material and product throughout production process. Perform relevant non-destructive examinations using varying methods. Complete all documentation required for tracking and record keeping. Perform root cause analysis on non-conformities found. The successful candidate will be able to train, coordinate, and communicate effectively with all departments and personnel. Other duties as assigned. Qualifications Current AWS CWI Certificate

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Title: Quality Control / Certified Welding Inspector (CWI) Division: Enerpipe Direct Report: Quality Manager Company Profile Enerpipe is a subsidiary of Enerfab, a privately held fabrication, construction, and maintenance services company based in Cincinnati, Ohio. For over 120 years, Enerfab has served a wide range of industries-including food and beverage, chemical, pharmaceutical, and energy-throughout the United States. The Quality Control / CWI will be a key member of the Quality Department, working closely with the Quality Manager, QC Supervisor, and Shop Foreman/Supervisor. The ideal candidate is detail-oriented, self-motivated, ethically sound, and committed to maintaining high standards of welding and fabrication quality. This individual will conduct inspections, review procedures, and support the Quality team in ensuring compliance with codes, customer specifications, and internal standards. Primary Responsibilities Perform inspections to determine if weldments meet acceptance criteria per applicable codes, standards, or customer specifications (ASME, AWS, API, or project-specific requirements). Conduct visual inspection of completed work and recommend repairs when necessary. Review Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and welder qualification records, including bend testing. Perform dimensional measurements and fit-up inspections for piping and components. Read and interpret job specifications, shop drawings, and fabrication plans to ensure proper layout, fit up, and weldment quality. Prepare detailed, accurate inspection reports and maintain organized documentation and filing systems. Establish and maintain effective working relationships with management, production, and other employees. Promote a culture of safety by understanding occupational hazards and adhering to safety precautions in a pipe fabrication environment. Provide guidance and mentorship to welding personnel and less-experienced inspectors. Collaborate with production, engineering, and management to resolve welding or quality-related issues. Assist with audits, continuous improvement initiatives, and other related duties as assigned. Required Qualifications & Experience Certified Welding Inspector (CWI) certification preferred; active AWS CWI strongly preferred. 3-5+ years of experience as a CWI or equivalent experience in welding inspection, QC, or fabrication. Hands-on welding experience and/or supervisory experience strongly preferred. Familiarity with ASME B31, ASME BPVC Section VIII, and Section IX is a plus (not required). Understanding of Weld Procedure Specifications (WPS), filler metal selection, and welder qualification testing. Experience with dimensional measurement for piping systems. Knowledge of welding techniques for carbon steel, stainless steel, and alloys, including FCAW, SMAW, GTAW, GMAW, and SAW. Proficient in Microsoft Office applications, particularly Excel and Word, with general computer and email proficiency. Strong attention to detail, ethical standards, and self-motivation. Effective verbal and written communication skills. Ability to work collaboratively, be proactive, and assist the Quality team when needed. Preferred Qualifications ASNT SNT-TC-1A NDT Level II certification in one or more methods: Radiographic Testing (RT) Ultrasonic Testing (UT - Shear Wave preferred) Penetrant Testing (PT) Visual Testing (VT) Previous supervisory or leadership experience in QC or welding inspection. Experience with quality audits, process improvement, and continuous improvement initiatives. Education & Training High school diploma or equivalent required. Additional formal training or certifications in welding, inspection, or quality systems is a plus. Physical & Work Environment Requirements Ability to lift, bend, and perform inspections in a pipe fabrication environment. Comfortable working in varied environments, including elevated areas, confined spaces, and around active fabrication operations. Reasonable accommodations available for qualified individuals with disabilities. Enerpipe is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Department: Quality Assurance Employment Type: Full-Time Regular FLSA Classification: Hourly, Non-Exempt Reports To: FSQA Supervisor Travel Requirements: 10% Shift: Weekend (Friday - Sunday) Role Summary: An FSQA Inspector is responsible for upholding the highest standards of food safety, quality, and regulatory compliance in all pet food products. This role plays a vital part in protecting the health and well-being of pets by carefully monitoring, evaluating, and verifying every stage of the manufacturing process - from raw material selection to final product packaging. By ensuring strict adherence to regulatory requirements, internal quality systems, and customer specifications, the FSQA Inspector helps maintain product integrity and fosters consumer trust in our brand. Role Responsibilities and Essential Functions: Quality Control Conduct routine inspections and audits of raw materials, in-process products, and finished goods to ensure compliance with quality and safety standards. Perform laboratory tests and analyses to identify contaminants or deviations from established specifications. Evaluate and test products in accordance with the Quality Plan to verify conformance to requirements. Place nonconforming products on physical hold and communicate findings to relevant personnel. Collaborate with production teams to identify root causes and implement corrective actions for quality issues. Collect raw material samples from production for laboratory testing. Conduct visual and swab-based pre-operational verifications of sanitation activities and initiate corrective or preventive actions when needed. Monitor employee hygiene practices and communicate any noncompliance to appropriate staff. Perform audits of glass and brittle plastic controls. Verify scale weights and oxygen analyzer accuracy according to established schedules. Serve as the primary quality and food safety contact on the production floor. Report any FSQA system issues to leadership and ensure compliance with all FSQA standards. Regulatory Compliance Ensure full compliance with FDA, USDA, AAFCO, and other applicable regulatory and industry standards. Stay current with evolving regulations and proactively implement required process or documentation updates. Process Monitoring Oversee production processes from ingredient receipt through packaging to identify potential food safety or quality risks. Partner with production teams to implement corrective and preventive measures and drive continuous process improvement. Documentation and Reporting Maintain accurate and timely records of inspections, tests, and other quality assurance activities. Prepare detailed reports on product quality, safety, and compliance for management review. Accurately enter and manage data within applicable computer systems. Training and Development Train production and support staff on quality assurance protocols, sanitation practices, and food safety procedures. Develop, update, and communicate standard operating procedures (SOPs) and training materials. Continuous Improvement Participate in cross-functional initiatives to identify and implement opportunities for product and process improvement. Recommend and support actions to enhance quality, food safety, and operational efficiency. Additional Responsibilities Replenish sanitation and personal hygiene supplies throughout production areas as needed. Collaborate with production personnel and the FSQA Supervisor to make decisions in the best interest of the organization. Act as a proactive advocate for food safety, product quality, and continuous improvement across all departments. All other duties as assigned. Requirements Education and Experience: High School Diploma or Equivalent (required) Experience in quality assurance or quality control within the food manufacturing industry (preferred) Knowledge of HACCP, GMPs, and other food safety and quality standards (preferred) Comfortable Working in a Fast-Paced, Hands-On Environment Skills and Abilities: A successful FSQA Inspector will have: Detail-oriented with solid analytical and problem-solving skills. Effective communicator able to work collaboratively across teams. Proficient in laboratory testing, data recording, and basic computer systems. Organized, adaptable, and committed to maintaining product safety and quality. Physical Requirements: The physical demands must be met with or without accommodation for an employee to be successful in performing the essential job functions of this role. This position requires standing and walking for most of the workday, often on hard surfaces within a production environment. The position involves frequent bending, reaching, and moving between different areas of the facility. The ability to repeatedly lift, carry, and move items weighing up to 40 pounds is essential. Additionally, the role may require working in varying environmental conditions, such as heat, cold, or humidity. The inspector must also be comfortable wearing personal protective equipment (PPE), including gloves, hairnets, ear protection, and safety footwear.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for QA Inspectors, Fixed Equipment (contract). Work will be assigned on a as needed basis and the contractor will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes ensuring that mechanical and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify results of FAT, Hydrotest non-destructive tests, etc. Monitoring welding parameters, and inspecting materials and equipment. Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. Verify that welders are qualified and that welding procedures and specifications (WPS) are followed correctly. Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. Witness Hydrotest, FAT, non-destructive testing (NDT) and interpret / verify results. Visual inspection on the quality of welding and mechanical projects. Ensure that materials, equipment, and safety regulations are followed. Prepare detailed reports documenting inspection results, including any issues found. Qualifications Must have API 510, AWS / CWI / CSWIP Minimum of five (5) years Fixed Equipment inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. Must have a minimum of 5 years of Oil and Gas Experience. Must be able to demonstrate knowledge of fixed equipment inspections. Must have welding inspections experience at manufacturer shops / facilities. Mechanical / welding inspection experience of Pressure vessels, Heat Exchangers, Tanks, Valves, etc.. would be an asset. Hours of work: Up to 8 or 10 hours a day, usually Monday to Friday subject to inspection scope requirement Work Schedule: Depending on the project requirement. This is not a permanent full time position. It is contract work and we contact you when we have a request for an inspection. If inspection site is beyond round trip 300 miles from Inspector place of residence then per diem could be applicable (client prior approval is required) Hourly rate: $42 to $48/hr. + $0.70 / km Must be eligible to work in the USA. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability. #IND

Bassett Mechanical is a 3rd generation family-owned company that provides custom-built industrial refrigeration, HVAC, plumbing, metal fabricating and preventative maintenance service solutions to customers throughout the United States and the world. It is not only a great place to grow and thrive in your career. It is a place to truly belong. As a member of the Bassett Mechanical Team, you'll enjoy a competitive compensation and benefits package and many professional growth opportunities. From the moment you're hired, to the day you retire, you're a part of our Bassett Mechanical Team. Position Purpose The purpose of this position is to verify specific functions are being carried out in accordance with the prescribed work package and customer specifications. This position will work in conjunction with engineering department, project management and shop foremen. This role reports to the Lead Quality Control Inspector. Position Responsibilities Material verification and testing and support material control system as required. Maintain welder certification log, welder continuity. Blast/Paint inspection Quality check “in-process” work (i.e.: fit-up and weld quality checks.) Visual inspection of joint preparation, Initial Root Pass and final welds. Verify welding procedure is being followed Verify welding personnel are qualified Final dimensional inspection Witness and perform Non-Destructive Testing Assemble components of the final data package as directed by the Lead Quality Control Inspector Maintain accurate documentation as required by the quality system (traveler, ITP, material log etc.) Issue NCR's when required and propose corrective action. Work closely with production staff to resolve quality issues Qualify welding personnel to AWS/ASME code and prepare certifying documentation. Support and maintain a Lean work environment Other tasks as assigned by the Lead Quality Control Inspector Summary of Skills, Knowledge and Abilities Experience as a Quality Control professional in an ASME/AWS code fabrication environment Ability to read, interpret, and apply client and code specifications and determine fabrication requirements from the specifications Knowledge of weld processes and fabrication techniques used in structural and pressure component fabrication Ability to read and understand AWS, and ASME welding procedures and supporting procedure qualification records for the applicable fabrication Prior background applying non-destructive examination methods is desirable Technical school degree with equivalent experience in an AWS/ASME code fabrication environment preferred Working knowledge of calipers, tape measures etc. and the ability to make metric conversions Advanced Blueprint reading skills Skilled with computers and Microsoft applications (word, excel, etc) Written and verbal communication skills Understanding of welding and machining symbols CWI with AWS D1.1 certification is preferred Direct Reports None

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Adams, Green Lake, Juneau, Marquette, Portage, Waupaca, Waushara, Wood Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position