Inspector jobs in Arkansas - 143 jobs

The Hartford Steam Boiler Inspection and Insurance Company is looking for an Inspector to join our Engineering Team! In this position you will perform inspections to include low to medium complexity risk exposures, but not limited to, commercial, industrial, and non-manufacturing locations for the purposes of jurisdictional certification, loss prevention, risk assessment, OnSights and claims investigations. May be utilized for fee service engineering inspections. Qualifications: Education and Experience: High school diploma or equivalent 2 years' experience with boilers, UPV, industrial, mechanical and electrical equipment is required Engineering degree (BSME, BSEE or BSChE) may be substituted for practical experience National Board Commission required Successful completion of Company required training Knowledge and Skills: Planning and organizational skills Self-motivated with the ability to work without direct supervision and adaptability Interpersonal skills Customer service skills Communicates effectively (both verbally and written) Problem solving skills Computer technology skills including the Microsoft Office Suite Physical Requirements: This position requires a person to routinely move about at a site facility. As such, candidates for this position must be able to perform the below physical requirements: * Ability to crawl through 11" X 15" openings into confined spaces. Enter and function in very tight confined spaces. * Ability to climb vertical ladders and several stories of stairs. * Ability to climb and function at heights of at least 30 feet, and up to eight (8) to ten (10) stories. * Ability to perform bending, stretching and twisting motions. * Ability to withstand temperature variations. Temperature variations could be as much as 70 degrees. * Ability to walk 3-5 miles. * Ability to stand for long periods of time and able to remain in a stationary position 50% of the time. * Ability to lift own body weight while hanging or entering a confined space with associated safety equipment * Ability to lift equipment up to 50 lbs. * Visual acuity of 20/20 (natural or corrected) and identify colors. * Ability to hear (corrected) the sounds of equipment operation. At Munich Re, we see Diversity and Inclusion as a solution to the challenges and opportunities all around us. Our goal is to foster an inclusive culture and build a workforce that reflects the communities in which we live and work. We strive to provide a workplace where all of our colleagues feel respected, valued and empowered to achieve their very best every day. We recruit and develop talent with a focus on providing our customers the most innovative products and services. We are an equal opportunity employer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. The work environment characteristics, and any physical and mental requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Apply Now Save job

Responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES * Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * Adheres to general work and safety requirements. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records, and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. QUALIFICATIONS * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. * Minimum 5 years' experience working on our Falcon models. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills. * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training * Performs duties as assigned.

Quality Inspector- Will work with all departments of the workshop to ensure accuracy of incoming and outgoing parts. Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. The right candidate will Is a safety minded worker who is drug free and dependable with an excellent attendance record Reports and/or corrects all unsafe conditions immediately Reports any safety incidents prior to the end of the shift Mentors' other employees as needed Performs cleaning, grinding, painting, hydrostatic testing, flame testing and all related tasks to buildings, equipment, components, subassemblies, and/or molds Performs simple disassembly and assembly work Performs clean up, removal of trash, coolant, oil, scrap, chips, etc. Moves equipment and parts using the fork truck, crane, or other material handling equipment Assists other employees as directed by management or group leaders Assists in the completion of internal audits Completes forms, router and related paperwork Keeps work area, tools and equipment clean and orderly Performs grit blasting, powder coating, operates the tool crib and completes all related tasks Performs a variety of non-destructive tests; takes measurements, records conformance/nonconformance, on first piece, in process and upon final inspection Reviews procedures, layouts, templates, jigs, incoming parts, assemblies and related tasks All other assigned duties What you'll need Hazard Recognition - knows/understands hazards of the job assignments before starting a job Communication - effectively communicates with other employees Advanced Measuring - use various complex measuring devices and gauges as required Blueprint Reading - interprets drawings Cranes - lifts equipment safely, knows where disconnect switches are, performs daily crane inspections, loads and unloads trucks, stages equipment Basic computer skills Forklift - drive safely, load and unload, refuel, perform daily forklift inspections Education High school diploma or GED Reading/Writing skills (literacy) as required Mathematics - Knows advanced shop math and other functions necessary for the job Completes OSHA General Industry 10 Hour Course Reviews and assists with development of all job related JSA's/Work Instructions Completes the SMS group Crane and Rigging Training Complete the SMS group Forklift Operator Training Completes Basic ISO Training Completes all training and education deemed necessary by management What we offer Competitive compensation, medical/dental/vision coverage, paid vacation, paid holiday time, 401k with a company match, training, a tuition reimbursement program and more! What we do SMS group is an industrial equipment manufacturer for the steel industry. We design, build, and service equipment and steel plants across the globe with a strong technical services/machine shop network in North America. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test. The hours for this position will be Monday through Friday, 7 a.m. to 3:30 p.m. The hours and days are subject to change based on business needs.

Arkansas Department of Health 4815 W Markham Street Little Rock, AR 72***********4 County: Pulaski City: Little Rock Anticipated Starting Salary: $47,396.96 Administration - Office of Preparedness & Emergency Response * CLASSIFIED AS A SAFETY SENSITIVE POSITION* Additional Preferences: This position will serve as the Emergency Medical Services Specialist in the Emergency Medical Services area. Occasional in-state and out-of-state travel required. A valid driver's license is required. Exposure to hazards may be required. A licensed Emergency Medical Technician - Ambulance Level by the Department of Health in accordance with ACA 20-131001 preferred. Hiring Official: A. White The mission of the Department of Health is to protect and improve the health and well-being of all Arkansans. Position Information Job Series: Inspectors and Investigators - Inspectors Classification: Inspector II Class Code: IIN02P Pay Grade: SGS05 Salary Range: $47,397 - $70,148 Job Summary The Inspector II is a dedicated professional responsible for ensuring that an organization's operations, processes, and facilities conform to internal standards, industry regulations, and applicable safety or quality guidelines. This role is vital in identifying deficiencies, irregularities, and non-compliance issues across various areas, then recommending corrective measures that drive performance improvements and safeguard regulatory adherence. The Inspector II works closely with management and operational teams in an attempt to establish a culture of continuous quality assurance and risk mitigation, playing a key role in enhancing organizational efficiency and protecting reputations. Primary Responsibilities Perform scheduled and unscheduled inspections and audits of facilities, processes, and operational procedures. Identify potential risks, non-compliance issues, or areas where improvements can be made. Compare current practices against internal policies, industry standards, and regulatory guidelines. Evaluate safety measures, quality control systems, and workflow processes to ensure they meet or exceed required standards. Prepare detailed inspection and audit reports that clearly outline findings, identified risks, and recommendations for corrective actions. Maintain accurate records of inspections, corrective measures implemented, and follow-up evaluations. Work with department heads and management to discuss inspection outcomes and develop action plans for addressing areas of concern. Provide guidance and training to personnel on compliance best practices, updated standards, and procedural improvements. Oversee the implementation of recommended improvements and track their effectiveness over time. Conduct follow-up inspections to ensure that corrective actions have been successfully executed. Continuously update your knowledge of evolving regulatory requirements, new industry standards, and technological advancements that may impact inspection practices. Proactively suggest adjustments to inspection protocols as necessary to maintain state-of-the-art quality management. Knowledge and Skills Strong analytical and observational skills, with acute attention to detail in identifying discrepancies and potential risks. Excellent written and verbal communication skills for effectively preparing reports and collaborating with a variety of assorted personnel. Proficient in using modern inspection tools, data management software, and digital reporting systems. Ability to work independently, manage multiple assignments, and adapt to shifting regulatory or operational landscapes. Minimum Qualifications High School Diploma or GED. Minimum of 4 years of hands-on experience in inspections, quality control, internal auditing, or compliance roles. Licensure/Certifications Must possess a valid Arkansas driver's license. OTHER JOB RELATED EDUCATION AND/OR EXPERIENCE MAY BE SUBSTITUTED FOR ALL OR PART OF THESE BASIC REQUIREMENTS, EXCEPT FOR CERTIFICATION OR LICENSURE REQUIREMENTS, UPON APPROVAL OF THE QUALIFICATIONS REVIEW COMMITTEE. The State of Arkansas is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, citizenship, national origin, genetic information, military or veteran status, or any other status or characteristic protected by law. Nearest Major Market: Little Rock

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina with offices spanning the United States, primarily southeast and central United States. Position Description Oversee the implementation of Thompson's Inspection and Test Plans (ITP'S) per the assigned site. Review materials to ASTM Requirements, which includes measuring of the components to ensure they are within the specification's tolerance. This includes working with employees as well as outside agencies or consultants involved in inspections and testing. Job Responsibilities * Generate documentation to provide assurance of compliance to contract requirements, ITP's and Thompson's QA Manual * Ensure all Quality Control records are maintained in an orderly, easily accessible, up to date and secure manner * Ensure policies and Standard Operating Procedures (SOP's) for Quality Control are being followed for field work and are documented when required * Ensure that materials, workmanship and construction are in full compliance with the contract plans and specifications, and applicable building codes * Generate Non Conformance Report (NCR) for any condition that does not comply with the applicable requirements or specifications * Be knowledgeable of assigned inspection criteria * Require that defective work or material be corrected or removed until made compliant * Approve receipt of materials per ASTM requirements * Accept or reject welds based on assigned written criteria * Perform dimensional checks on materials in question * Conduct business in a professional and ethical manner * Effectively coach Craft in quality program processes * Other duties as assigned Job Qualifications * 5 years of work experience in the construction field * Able to navigate Code books and technical manuals * Proficient at understanding construction drawings * Have a general understanding of various structural bolting methods (turn of the nut, direct tension indicators, impact wrenches, etc.) * Visual Testing (VT)-VT Level lI or Certified Welding Inspector (CWI) * Ability to use weld inspection tools * Ability to use coatings inspection tools * Ability to verify materials using Material Test Reports (MTR's) * Familiarity with construction workplace health and safety concepts * Attention to detail and completes documentation in timely manner * Must be at least 18 years of age * Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively. * Work in hot/cold/damp/cramped environments * 40 or more hours per week with possible weekend work * Background check and drug screen based on job location/requirements Benefits * We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************** Email: *********************************** Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English To see other positions, click here.

Job Description Department: Quality Reports To: Quality Manager FLSA Status: Non-Exempt Why Central Moloney? Since 1949, Central Moloney has been an industry leader in transformer manufacturing, with an unwavering commitment to quality and innovation. As an ISO 9001-certified company, we offer stability, hands-on learning, and a supportive culture that values every individual. Join a team where your attention to detail directly impacts the reliability of the power grid. At Central Moloney, we don't just manufacture transformers-we power the infrastructure that keeps homes, hospitals, and communities running. As a QC Receiving Inspector, you play a critical role in ensuring incoming materials meet quality standards before they ever reach production. Position Description: The QC Receiving Inspector is responsible for inspecting incoming materials, components, and parts to ensure compliance with engineering drawings, specifications, and quality standards. This role supports production by identifying nonconforming materials, maintaining accurate inspection records, and ensuring only approved materials enter the manufacturing process. The position requires strong attention to detail, consistency, and the ability to follow established inspection procedures in a fast-paced manufacturing environment. Position Responsibilities / Duties: Inspect incoming raw materials, components, and purchased parts in the receiving area for conformance to drawings, specifications, and quality requirements. Verify dimensions, quantities, and visual characteristics using measuring tools such as calipers, tape measures, and gauges. Review and interpret engineering drawings, purchase orders, and inspection criteria. Document inspection results accurately and complete rejection or nonconformance reports for materials that do not meet specifications. Clearly tag, segregate, and communicate nonconforming material to Quality, Purchasing, and Operations teams. Maintain organized inspection records and documentation in accordance with ISO 9001 and company quality procedures. Support audits and quality reviews as needed. Follow all safety, quality, and company policies while working in the receiving and inspection areas. Communicate effectively with team members and supervisors regarding inspection findings and material status. Requirements Qualifications Education: High school diploma or equivalent required. Technical or vocational coursework related to quality, manufacturing, or inspection is a plus. Experience: Prior experience in quality control, receiving inspection, or manufacturing inspection preferred. Experience working in a manufacturing or industrial environment is strongly desired. Skills and Competencies: Ability to read and interpret engineering drawings and specifications. Proficiency using basic measuring tools (calipers, rulers, tape measures, gauges). Strong attention to detail and commitment to accuracy. Ability to complete inspection and rejection reports clearly and accurately. Familiarity with quality systems, procedures, and documentation. Ability to work independently while meeting daily deadlines. Effective communication skills and a team-oriented mindset. Comfortable working in a fast-paced manufacturing environment. Physical and Environmental Requirements Lifting: Able to lift 50 pounds unassisted. Environment: Work in a facility with loud noise, extreme temperatures, and environmental stressors. Physical Activities: Sit, stand, walk, bend, climb, crouch, reach, and grasp as needed. PPE: Wear required PPE, including eye and hearing protection, gloves, and safety toe footwear. Dexterity and Vision: Manual dexterity and specific vision abilities (close, distance, color, peripheral, depth perception, and focus adjustment). Stamina: Stand for long shifts. Skills: Effective communication, basic math skills, and teamwork. Safety: Adhere to safety protocols and address hazards. Benefits Benefits Medical, Dental, Life Insurance, 401(k) Please Note & Review the Following: This position is considered safety-sensitive because impairment by drugs or alcohol may constitute a threat to health or safety, and/or a lapse of attention could result in injury, illness, or death. Central Moloney is a tobacco-free facility. The use of tobacco products (including cigarettes, cigars, smokeless tobacco, and e-cigarettes/vapes) is not permitted on company property. Equal Opportunity Employer Statement Central Moloney is an equal opportunity employer. We make employment decisions based on qualifications, merit, and business needs. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital or family status, genetic information, veteran status, or any other status protected by law. We are committed to creating a respectful, fair, and welcoming workplace for all, and we believe that a variety of experiences and perspectives strengthens our team. Recruitment Policy: No Third-Party Involvement We value the interest of all job seekers; however, we do not accept unsolicited resumes or candidate submissions from recruitment agencies, staffing firms, or third-party recruiters. Any resumes submitted in the absence of a signed agreement with Central Moloney will be considered the property of CMI. Central Moloney will not be responsible for any fees related to unsolicited resumes.

Are you ready to start "Building America"? At Lexicon, we're seeking a skilled Quality Control Inspector to join our team and be a part of our continued success. If you're passionate about being a part of a team that values integrity, teamwork, and innovation, then Lexicon is the place for you. Join us and become a part of our growing family as we continue to build a brighter future together. Apply now to embark on an exciting journey with Lexicon! Lexicon Benefits * Health, Dental, Vision, and Life Insurance * HSA with employer contributions * Life Insurance * Paid Holidays and Vacation * 401k with company match * Lexicon University Our Lexicon University provides free career development and training, so employees can improve their skills in their chosen field, learn new skills in another area and build a career path that leads to job satisfaction and success for them and their families. Quality Control Inspector Overview: Join us as a Quality Control Inspector, where you'll play a pivotal role in upholding the highest standards of production in our fabrication shop. Your responsibilities will include ensuring adherence to shop drawings and American Welding Society specifications, guaranteeing the quality and integrity of materials. Safety is paramount in this position, as any oversight in performing essential duties could pose risks to our team and the wider community. If you're ready to make a meaningful impact by maintaining excellence and safety in our operations, this opportunity awaits you. Join us in shaping a future where quality and safety go hand in hand. * Paid WEEKLY Quality Control Inspector Essential Duties and Responsibilities: * Inspects all fabrication jobs to maintain the quality levels of work produced in accordance with applicable codes and standards and Prospect Steel QC procedures. * Travels to subcontracts to inspect jobs for proper standards when required. * Prepares daily inspection reports. * Monitor records on all shop welders with their level of certification and monitor daily rod use. * Assist in setting up, monitor and maintain welding procedures, bolting procedures and painting procedures required for projects. * Provide feedback on questions related to qualifying and project requirements from shop employees. * The ability to work overtime and regular, punctual attendance is required. Quality Control Inspector Qualifications: * High School education or the equivalent is required. * Minimum of two years' experience in construction industry and/or welding. * Certified Welding Inspector (CWI) may be required. Must be proficient in reading and interpreting structural steel drawings. * Must have excellent communication skills. Physical Demands: * Ability to lift 50 lbs. frequently, climb 25 ft, and ability to bend, stoop, push and pull frequently. * Exposure to temperature fluctuations and loud work environment. * Overtime and weekend work may be required. This role is classified as safety sensitive. Candidates must show the capacity to proactively initiate, effectively lead, and consistently uphold safety policies, practices, procedures, and housekeeping standards. Compliance with this requirement is a fundamental condition for employment. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ********************* Drug Free Workplace Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese To see other positions, click here.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Job Types: Part-time, Contract Pay: $410.00 per month Benefits: Flexible schedule Compensation Package: 1099 contract Work Location: On the road

Job Description Responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Performs duties as assigned.

Job Description Quality Inspector- Will work with all departments of the workshop to ensure accuracy of incoming and outgoing parts. Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. The right candidate will Is a safety minded worker who is drug free and dependable with an excellent attendance record Reports and/or corrects all unsafe conditions immediately Reports any safety incidents prior to the end of the shift Mentors' other employees as needed Performs cleaning, grinding, painting, hydrostatic testing, flame testing and all related tasks to buildings, equipment, components, subassemblies, and/or molds Performs simple disassembly and assembly work Performs clean up, removal of trash, coolant, oil, scrap, chips, etc. Moves equipment and parts using the fork truck, crane, or other material handling equipment Assists other employees as directed by management or group leaders Assists in the completion of internal audits Completes forms, router and related paperwork Keeps work area, tools and equipment clean and orderly Performs grit blasting, powder coating, operates the tool crib and completes all related tasks Performs a variety of non-destructive tests; takes measurements, records conformance/nonconformance, on first piece, in process and upon final inspection Reviews procedures, layouts, templates, jigs, incoming parts, assemblies and related tasks All other assigned duties What you'll need Hazard Recognition - knows/understands hazards of the job assignments before starting a job Communication - effectively communicates with other employees Advanced Measuring - use various complex measuring devices and gauges as required Blueprint Reading - interprets drawings Cranes - lifts equipment safely, knows where disconnect switches are, performs daily crane inspections, loads and unloads trucks, stages equipment Basic computer skills Forklift - drive safely, load and unload, refuel, perform daily forklift inspections Education High school diploma or GED Reading/Writing skills (literacy) as required Mathematics - Knows advanced shop math and other functions necessary for the job Completes OSHA General Industry 10 Hour Course Reviews and assists with development of all job related JSA's/Work Instructions Completes the SMS group Crane and Rigging Training Complete the SMS group Forklift Operator Training Completes Basic ISO Training Completes all training and education deemed necessary by management What we offer Competitive compensation, medical/dental/vision coverage, paid vacation, paid holiday time, 401k with a company match, training, a tuition reimbursement program and more! What we do SMS group is an industrial equipment manufacturer for the steel industry. We design, build, and service equipment and steel plants across the globe with a strong technical services/machine shop network in North America. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test. The hours for this position will be Monday through Friday, 7 a.m. to 3:30 p.m. The hours and days are subject to change based on business needs.

22087828 County: Columbia; Lafayette; Miller; Nevada; Ouachita; Union BOS Hiring Authority: #1 Natural Resources Drive Little Rock, AR 72205 Phone: ************ Email: *************************** As the largest industry in Arkansas, the Arkansas Department of Agriculture is dedicated to the development and implementation of policies and programs for Arkansas agriculture and forestry to keep its farmers and ranchers competitive in national and international markets while ensuring safe food, fiber, and forest products for the citizens of the state and nation. The Department is organized into five Divisions: Forestry Division, Livestock and Poultry Division, Natural Resources Division, Plant Industries Division, and Shared Services Division. Position Information Job Series: Inspectors and Investigators - Inspectors Classification: Inspector I Class Code: IIN01P Pay Grade: SGS04 Salary Range: $43,088 - $63,770 Job Summary The Inspector I is a junior professional responsible for conducting routine inspections and evaluations to ensure that facilities, projects, or operational procedures adhere to established internal standards and regulatory guidelines. Under close supervision, this role serves as a foundational position in quality assurance and safety management. The Inspector I gathers and documents critical information, identifies potential risks or nonconformities, and supports more experienced inspectors and management teams in upholding compliance, safety, and quality within the organization. Primary Responsibilities Perform scheduled and unscheduled inspections of facilities, equipment, or projects to ensure adherence to established codes, standards, and safety regulations. Utilize pre-determined standardized checklists and inspection protocols to document findings accurately. Prepare clear and concise inspection reports outlining observations, discrepancies, and recommended corrective actions. Maintain accurate records of inspection activities and follow up on pending issues. Work under the supervision of senior inspectors or quality assurance managers, assisting in coordinating and prioritizing inspection tasks. Communicate effectively with team members and departments to relay inspection results and support corrective initiatives. Follow established guidelines and protocols to ensure a safe and compliant work environment. Demonstrate a commitment to learning and applying industry-specific standards and best practices. Participate in on-the-job training sessions to develop a deeper understanding of inspection techniques and regulatory requirements. Stay informed about emerging practices, tools, or technologies that can enhance inspection accuracy and efficiency. Knowledge and Skills Acute attention to detail and strong observational skills. Basic computer skills, including familiarity with data entry and reporting software. Effective verbal and written communication skills for clear documentation and collaboration. A proactive attitude and willingness to learn from experienced professionals. Minimum Qualifications High School Diploma or GED. This role is designed as a learning opportunity, with structured training provided to develop technical proficiency and practical knowledge over time. Licensure/Certifications Must possess a valid Arkansas driver's license. OTHER JOB RELATED EDUCATION AND/OR EXPERIENCE MAY BE SUBSTITUTED FOR ALL OR PART OF THESE BASIC REQUIREMENTS, EXCEPT FOR CERTIFICATION OR LICENSURE REQUIREMENTS, UPON APPROVAL OF THE QUALIFICATIONS REVIEW COMMITTEE. Preferred Qualifications: * Work independently, infrequently lift and carry up to 100 pounds, and frequently lift and carry to 30 pounds and/or bulky objects. * Climb stairs/ladders, bend/stoop, kneel, push/pull, stand/walk for prolonged time periods, and wear personal protective gear. * Communicate effectively orally and in writing. * Interpret/apply/enforce all applicable standards. The State of Arkansas is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, citizenship, national origin, genetic information, military or veteran status, or any other status or characteristic protected by law. Nearest Major Market: Little Rock

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Department: Quality Reports To: Quality Manager FLSA Status: Non-Exempt Why Central Moloney? Since 1949, Central Moloney has been an industry leader in transformer manufacturing, with an unwavering commitment to quality and innovation. As an ISO 9001-certified company, we offer stability, hands-on learning, and a supportive culture that values every individual. Join a team where your attention to detail directly impacts the reliability of the power grid. At Central Moloney, we don't just manufacture transformers-we power the infrastructure that keeps homes, hospitals, and communities running. As a QC Receiving Inspector, you play a critical role in ensuring incoming materials meet quality standards before they ever reach production. Position Description: The QC Receiving Inspector is responsible for inspecting incoming materials, components, and parts to ensure compliance with engineering drawings, specifications, and quality standards. This role supports production by identifying nonconforming materials, maintaining accurate inspection records, and ensuring only approved materials enter the manufacturing process. The position requires strong attention to detail, consistency, and the ability to follow established inspection procedures in a fast-paced manufacturing environment. Position Responsibilities / Duties: Inspect incoming raw materials, components, and purchased parts in the receiving area for conformance to drawings, specifications, and quality requirements. Verify dimensions, quantities, and visual characteristics using measuring tools such as calipers, tape measures, and gauges. Review and interpret engineering drawings, purchase orders, and inspection criteria. Document inspection results accurately and complete rejection or nonconformance reports for materials that do not meet specifications. Clearly tag, segregate, and communicate nonconforming material to Quality, Purchasing, and Operations teams. Maintain organized inspection records and documentation in accordance with ISO 9001 and company quality procedures. Support audits and quality reviews as needed. Follow all safety, quality, and company policies while working in the receiving and inspection areas. Communicate effectively with team members and supervisors regarding inspection findings and material status. Requirements Qualifications Education: High school diploma or equivalent required. Technical or vocational coursework related to quality, manufacturing, or inspection is a plus. Experience: Prior experience in quality control, receiving inspection, or manufacturing inspection preferred. Experience working in a manufacturing or industrial environment is strongly desired. Skills and Competencies: Ability to read and interpret engineering drawings and specifications. Proficiency using basic measuring tools (calipers, rulers, tape measures, gauges). Strong attention to detail and commitment to accuracy. Ability to complete inspection and rejection reports clearly and accurately. Familiarity with quality systems, procedures, and documentation. Ability to work independently while meeting daily deadlines. Effective communication skills and a team-oriented mindset. Comfortable working in a fast-paced manufacturing environment. Physical and Environmental Requirements Lifting: Able to lift 50 pounds unassisted. Environment: Work in a facility with loud noise, extreme temperatures, and environmental stressors. Physical Activities: Sit, stand, walk, bend, climb, crouch, reach, and grasp as needed. PPE: Wear required PPE, including eye and hearing protection, gloves, and safety toe footwear. Dexterity and Vision: Manual dexterity and specific vision abilities (close, distance, color, peripheral, depth perception, and focus adjustment). Stamina: Stand for long shifts. Skills: Effective communication, basic math skills, and teamwork. Safety: Adhere to safety protocols and address hazards. Benefits Benefits Medical, Dental, Life Insurance, 401(k) Please Note & Review the Following: This position is considered safety-sensitive because impairment by drugs or alcohol may constitute a threat to health or safety, and/or a lapse of attention could result in injury, illness, or death. Central Moloney is a tobacco-free facility. The use of tobacco products (including cigarettes, cigars, smokeless tobacco, and e-cigarettes/vapes) is not permitted on company property. Equal Opportunity Employer Statement Central Moloney is an equal opportunity employer. We make employment decisions based on qualifications, merit, and business needs. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital or family status, genetic information, veteran status, or any other status protected by law. We are committed to creating a respectful, fair, and welcoming workplace for all, and we believe that a variety of experiences and perspectives strengthens our team. Recruitment Policy: No Third-Party Involvement We value the interest of all job seekers; however, we do not accept unsolicited resumes or candidate submissions from recruitment agencies, staffing firms, or third-party recruiters. Any resumes submitted in the absence of a signed agreement with Central Moloney will be considered the property of CMI. Central Moloney will not be responsible for any fees related to unsolicited resumes. 📍 Where We Hire Central Moloney is currently authorized to employ individuals (remote or on-site) only in the following states: Arkansas (AR), Florida (FL), Kansas (KS), Tennessee (TN), Texas (TX), and Wisconsin (WI). Candidates must physically reside in one of these states to be eligible for employment. Employment across state lines is not permitted.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Job Types: Part-time, Contract Pay: $1,500.00 per month Benefits: Flexible schedule Compensation Package: 1099 contract Work Location: On the road

Perform major inspections of the aircraft. Inspect modifications, alterations and repairs to the aircraft, components, major assemblies or sub-assemblies to applicable approved data and document their findings in accordance with FAA and company procedures. Make appropriate log book entries to document work performed by the repair station in accordance with FAA regulations. Interface with the maintenance floor supervisor, customer and FAA as required to accomplish their duties in a professional manner. Ensure safety of the product being serviced and the documentation of the maintenance being performed by the repair station. Job Duties & Responsibilities Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality. Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data. Perform to company standards, work instructions, and perform necessary calculations using shop math to conform tooling, detailed parts, assemblies and installations. Performs complete inspection of components and production tools to determine safety or conformance to standards and requirements. Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65, 21 and related A/C's rev. 1 Complete and maintain other reports and records as required. Accurately log computerized labor data collection for time and attendance tracking. Follows specific authorizations as listed on Inspection Authorization Letter. Contributes to a positive work environment while maintaining the utmost level of professionalism at all times. Able and willing to mentor others. Able to communicate technical information clearly to supervisory personnel, flight crews and customers. Works assigned shift and unscheduled overtime as-needed or requested. Ability to travel and perform AOG maintenance. Occasionally communicates directly with customers and vendors. Maintains a clean and organized work area at all times and adheres to company dress standards. Perform all other duties as assigned to support the efficient operation of the department and company Shift Friday- Sunday 7am-7:30pm Qualifications High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs. 3+ years aircraft related experience required 2+ years aircraft inspection experience preferred FAA Airframe and Powerplant Certificate required Good knowledge of FAA regulations as pertaining to aircraft maintenance. Must have required tools. Intermediate computer skills preferred. Turbine jet aircraft training and experience - Dassault Falcon Models preferred. FAA Inspection Authorization certification preferred Working Conditions Works in a climate controlled hangars. (Heated and Cooled) Occasionally works outside on tarmac in atmospheric weather conditions. Physical Requirements Ability to wear and utilize personal protective equipment Must be able to lift up to 50 pounds without assistance Must be able to lift and carry up to 100 pounds with assistance Comfortable in tightly enclosed areas, heights involving lifts and ladders, as well as, flying. Requires the ability to perform all physical functions of the job (hear, stand, kneel, walk, etc.)

22094676 County: Washington Egg Hiring Authority: 1 Natural Resources Drive Little Rock, AR 72205 Phone: ************ Email: ************************************ As the largest industry in Arkansas, the Arkansas Department of Agriculture is dedicated to the development and implementation of policies and programs for Arkansas agriculture and forestry to keep its farmers and ranchers competitive in national and international markets while ensuring safe food, fiber, and forest products for the citizens of the state and nation. The Department is organized into five Divisions: Forestry Division, Livestock and Poultry Division, Natural Resources Division, Plant Industries Division, and Shared Services Division. Position Information Job Series: Inspectors and Investigators - Inspectors Classification: Inspector I Class Code: IIN01P Pay Grade: SGS04 Salary Range: $43,088 - $63,770 Job Summary The Inspector I is a junior professional responsible for conducting routine inspections and evaluations to ensure that facilities, projects, or operational procedures adhere to established internal standards and regulatory guidelines. Under close supervision, this role serves as a foundational position in quality assurance and safety management. The Inspector I gathers and documents critical information, identifies potential risks or nonconformities, and supports more experienced inspectors and management teams in upholding compliance, safety, and quality within the organization. Primary Responsibilities Perform scheduled and unscheduled inspections of facilities, equipment, or projects to ensure adherence to established codes, standards, and safety regulations. Utilize pre-determined standardized checklists and inspection protocols to document findings accurately. Prepare clear and concise inspection reports outlining observations, discrepancies, and recommended corrective actions. Maintain accurate records of inspection activities and follow up on pending issues. Work under the supervision of senior inspectors or quality assurance managers, assisting in coordinating and prioritizing inspection tasks. Communicate effectively with team members and departments to relay inspection results and support corrective initiatives. Follow established guidelines and protocols to ensure a safe and compliant work environment. Demonstrate a commitment to learning and applying industry-specific standards and best practices. Participate in on-the-job training sessions to develop a deeper understanding of inspection techniques and regulatory requirements. Stay informed about emerging practices, tools, or technologies that can enhance inspection accuracy and efficiency. Knowledge and Skills Acute attention to detail and strong observational skills. Basic computer skills, including familiarity with data entry and reporting software. Effective verbal and written communication skills for clear documentation and collaboration. A proactive attitude and willingness to learn from experienced professionals. Minimum Qualifications High School Diploma or GED. This role is designed as a learning opportunity, with structured training provided to develop technical proficiency and practical knowledge over time. Licensure/Certifications Must possess a valid Arkansas driver's license. OTHER JOB RELATED EDUCATION AND/OR EXPERIENCE MAY BE SUBSTITUTED FOR ALL OR PART OF THESE BASIC REQUIREMENTS, EXCEPT FOR CERTIFICATION OR LICENSURE REQUIREMENTS, UPON APPROVAL OF THE QUALIFICATIONS REVIEW COMMITTEE. Preferred Qualifications: * Collects random samples of eggs for inspections and candling to ensure minimum standards are met. * Inspects retail food stores, restaurants, hospitals, nursing homes, distributors, and other egg product users by visiting establishments, selecting random samples of eggs for inspection and candling, verifying packer and distributor permit information, checking storage temperature, reviewing invoices for correct terminology, and checking cartons for code dates, and packer origin to ensure compliance with the Arkansas Egg Marketing Act. * Acts as a temporary replacement grader at poultry processing plants by examining products from each processing line for compliance with regulations and contract specifications. Monitors plant and processing operations to ensure that facilities and equipment are sanitary and prepares a variety of reports and records related to plant operations and products. * Acts as temporary replacement grader at shell egg processing plants by inspecting each shift for sanitation and checking and recording temperature and chlorine levels of egg wash. Records temperature and relative humidity of coolers and shipping area. Observes machinery for proper dating and labeling. Examines individual eggs for weight, grade, and quality. Notifies plant management of samples out of compliance. * Trains company employees in proper egg and poultry grading and issues official certificates for various contracts. * Reviews contract abstracts and specification requirements and determines that grade, size, and weight conform to specifications. * Performs other duties as assigned. * Frequent overnight travel is required. Exposure to chemicals, varying temperatures, noise, and unpleasant odors are required. The State of Arkansas is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, citizenship, national origin, genetic information, military or veteran status, or any other status or characteristic protected by law. Nearest Major Market: Fayetteville

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Job Types: Part-time, Contract Pay: $580.00 per month Benefits: Flexible schedule Compensation Package: 1099 contract Work Location: On the road