Inspector jobs in Arlington, VA - 281 jobs

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title:Mortgage Occupancy Field Inspector County Coverage: Arlington Inspection Vol. per Month: 16 Preferred Experience: We are looking for knowledgeable and experienced inspectors: Aspen Grove ABC# Have used at least one of the industry standard smart phone apps: InspectorADE (what GIS uses), EZ Inspections or SafeView inspect Currently conducting occupancy inspections (or have in the past) Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walkthrough or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Valid US drivers license Aspen Grove ABC # Computer with an internet connection Fuel efficient vehicle iPhone or Android Printer Office supplies (paper, envelopes, ink) HUD keys (set of 11) Daylight hour availability Volt stick (preferred) Pay and Hours: Set rate per inspection is estimated at $15-$20+ per hour based on the number of inspections performed **This will vary depending on location, volume and efficiency.** Inspections are paid out every Friday by direct deposit for work completed the prior week Depending on the territory you should expect to work 5-15+ hours per week The job is a 1099 Independent Contractor position

Antwerpen Nissan Clarksville 12451 Auto Dr. Clarksville, MD 21029 MD STATE INSPECTOR We are seeking a skilled Automotive Technician with a MD State Inspectors License to join our team. The ideal candidate will have experience in vehicle maintenance, dealership operations, and possess knowledge of automotive electrical systems and diagnostics. We Are Busy and need to move vehicles through the shop! Qualifications: The ideal candidate will have experience in vehicle maintenance, dealership operations, and possess knowledge of automotive electrical systems and diagnostics. Proven experience as an Automotive Technician/Maryland State Inspector. Proficiency in automotive diagnostics and repair techniques. Benefits: Health Insurance (Single and Family) Dental Insurance (Single and Family) Vision Insurance (Single and Family) Paid Holidays, Sick Leave and Vacation Responsibilities Inspect traded vehicles and purchases for resale Conduct diagnostic tests to identify vehicle issues and provide accurate repair recommendations Repair multiple vehicle systems as needed. Utilize schematics and knowledge Power Train troubleshoot complex automotive problems Perform vehicle maintenance for a customer base trained to do scheduled maintenance Transmit clear explanations of work needed Use hand tools effectively to complete repairs in a timely manner

Perform high quality inspections and market our inspection services to agents and the general public. All inspections are completed onsite. This position requires travel every day. Job Duties and Responsibilities (Essential Job Functions) Perform high-quality residential home inspections Utilize our mobile scheduling platform to set availability and check schedules Use our amazing reporting software to perform on-site inspections and deliver reports same day Participate in monthly team meetings, including marketing training Work with Team Lead to market to offices and agents, e.g., sales meetings, lunch and learns Collaborate with our marketing team, including email and social campaigns Market our inspection services to audiences including agents and the general public Distribute marketing collateral and information to potential customers Help to cultivate a culture of excellence Performance Expectations Meet all performance and behavior expectations outlined in the company performance appraisal form or communicated by management. Perform responsibilities as directed achieving desired results within expected time frames and with a high degree of quality and professionalism. Establish and maintain positive and productive work relationships with all staff, customers and business partners. Demonstrate the behavioral and technical competencies necessary to effectively complete job responsibilities. Take personal initiative for technical and professional development. Follow the company HR Policy, the Code of Business Conduct and all subsidiary and department policies and procedures, including protecting confidential company information, attending work punctually and regularly, and following good safety practices in all Qualifications Education: Licensed in the state performing inspections. Must have license to perform home inspections, termite inspections and radon inspections. Valid driver's license. Experience: Previous experience performing home inspections. Knowledge and Skills: Keyboarding. Kind, honest, optimistic, respectful, non-alarmist Like to meet people, work hard, and help your team We offer a full suite of benefits including Medical, Health Savings Account, Dental, Vision, Life Insurance, Paid Vacation (PTO), 401(k) with employer match, Flexible Spending Account, and Employee Assistance Program (EAP) Equal Opportunity Employer Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Ecolab is seeking driven sales professionals to join the Pest Management Services division Sales team in the United States. As a Sales Development Manager you will build and grown profitable client relationships with residential and commercial businesses to protect their homes, facilities, and ensure their health and safety. This position requires strong sales acumen, technical knowledge of pest control methods, and excellent customer service skills. You will drive sales and attain budget but leveraging prospecting, conducting inspections, identifying pest issues, and proposing effective solutions to target residential customers and commercial customers in small clinics, malls, apartments, schools, and daycare facilities. What's in it For You: The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments The ability to make an impact with a company that is passionate about your career development Receive a company vehicle for business use with insurance, maintenance, and fuel included Enjoy a flexible, independent work environment Grow your income as you drive sales through commission Comprehensive benefits package starting day 1 of employment - medical, dental, vision, matching 401(k), company paid pension, stock purchase plan, tuition reimbursement and more! What You Will Do: Sales and Proposals Prospect and acquire commercial customers to meet annual new business sales goals. Discover sales opportunities and implement sales strategies Engage with potential clients to understand their pest control needs and concerns. Develop customized pest control plans and present them to clients, emphasizing the benefits and cost-effectiveness of the proposed solutions. Follow up with clients to answer questions, address concerns, and secure sales. Achieve and exceed monthly and quarterly sales targets established by the company. Conducting Inspections Perform detailed inspections of residential and commercial properties to identify signs of pest infestations. Assess the extent of pest damage and identify potential entry points for pests. Document findings with precision, using photographs and detailed reports. Customer Service Maintain ongoing communication with clients to ensure satisfaction with pest control services. Provide expert advice on preventing future pest infestations and recommend maintenance plans. Handle client complaints and resolve issues in a timely and professional manner. Technical Knowledge and Training Stay updated on the latest pest control techniques, products, and regulations. Attend regular training sessions to enhance technical skills and sales tactics. Ensure compliance with all safety and environmental regulations during inspections and treatments. Position Details: Candidate should reside within a commutable distance from Rockville, Maryland Territory covers areas from Stafford to Manassas and surrounding area Territory covers about a 45 mile radius of the surrounding area No overnight travel required Minimum Qualifications: Bachelor's degree or equivalent combination of education and experience Position requires a current and valid driver's license Home office with internet access capability Must be able to read and write in English Immigration sponsorship is not available for this role Physical Requirements: Drive a company vehicle as required to perform job duties (pre-employment and ongoing motor vehicle record checks will be performed to determine eligibility to drive a company vehicle) Ability to perform essential functions of the job, with or without reasonable accommodation Preferred Qualifications: Sales experience, preferably in pest control or other field service industry Three years of demonstrated proven results in commercial sales or equivalent experience Knowledge of pest biology, behavior, and control methods. Excellent communication, negotiation, and presentation skills. Ability to work independently and manage time effectively. Proven relationship management and consulting skills Excellent organization/time management skills Problem-solving ability to determine customer solutions Strong self-motivation & drive for results About Ecolab Pest Elimination: Learn how scientifically proven protocols help eliminate pests through 3.6 million customer visits annually. Ecolab Pest Elimination provides solutions to prevent and eliminate all types of pests in commercial buildings, food processing plants, food retail, food service, and many other markets. By partnering with our customers in these markets, you can help protect their facilities, homes, employees, and brands when it's more important than ever. Annual or Hourly Compensation Range The total Compensation range for this position is $84,300-$126,400 which includes base pay and target incentive based on performance, per plan terms. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Full-time Description LAC Federal is seeking a detail-oriented Inspector - Quality Control to perform essential quality control reviews of various materials at a prestigious federal library in Washington, DC. The Inspector will be responsible for ensuring the accuracy of physical processing and cataloging of Monographs, Serials, and other item types. This position requires a keen eye for detail, strong organizational skills, and a commitment to maintaining high-quality standards in library technical services. Responsibilities Conducting quality control reviews on processed library materials to ensure accuracy. Verifying physical processing of items and ensuring correct placement of labels, barcodes, and other identifying features. Reviewing Item, Holdings, and Bibliographic records in an online catalog system to identify and correct errors. Ensuring compliance with established library processing and cataloging standards. Reviewing at least 25 items per hour with a high rate of accuracy. Compiling and analyzing data using Excel for statistical and tracking purposes. Providing constructive feedback on errors and inconsistencies to improve workflow efficiency. Working with materials in multiple languages, ensuring sufficient quality control. Requirements 1-2 years of experience in a library, preferably in Technical Services. Familiarity with Technical Services procedures, online catalogs, MARC records, and basic cataloging processes. Experience reviewing completed work and providing quality assurance feedback. Strong attention to detail and ability to maintain high accuracy standards. Proficiency in Excel for compiling statistics and data tracking. Ability to meet production quotas and strict deadlines. Strong time management and organizational skills. Preferred Qualifications Master of Library Science (MLS) from an ALA-accredited institution. Physical Requirements: Ability to move around within the facility and handle delicate library materials. Capable of lifting, pushing, pulling, holding, or carrying materials up to 25 pounds. Ability to bend, stoop, reach, climb, and retrieve books as needed. Must be able to sit for extended periods and maintain focus on detailed tasks, including reviewing records on a computer screen. If you meet the qualifications and are eager to contribute to a high-quality library project, we encourage you to apply! Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long-Term Disability Training & Development EEO Statement The company and its subsidiaries are an equal opportunity employer and celebrate the population of differences and does not discriminate in its hiring/hiring practices, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Nothing in this job specification restricts management's right to assign or reassign duties and responsibilities to this job at any time. Critical features of this job are described under various headings above. They may be subject to change at any time due to reasonable accommodation or other reasons. The above statements are strictly intended to describe the general nature and level of the work being performed. They are not intended to be construed as a complete list of all responsibilities, duties, and skills required of employees in this position. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

One of the fastest-growing providers of Fire, Security and Building Systems has a new opening for a Lead Inspector to drive execution for their projects in the Columbia, MD region! This organization commits it's WHY and HOW through their culture, way of work and offerings to it's employees - truly a forever home to the right minded individual who's looking for better. Key Highlights: Lead the inspection, testing and client sign-off of Fire Alarm, Sprinkler, Security, Low Voltage and Life Safety systems Tight to the Columbia, MD region, limited travel Support: Elevated by a global industry leader through leadership, tools, and operational excellence. High-Level Systems: Access to systems like Edwards, Honeywell - Notifier, Silent Knight, Fire-Lite, and others. Leading Perks: Top compensation, benefits, training, and experiences. Limitless Future: Opportunities for growth within a thriving company. Company Vehicle: Take-home vehicle with gas card and in-house maintenance department. Compensation: Salary: Based on experience, paid hourly, bi-weekly. Certifications: NICET and active certifications can lead to top industry rates. Reach out to me if you're interested in this, other openings or discussing your career overall! ************************* ************

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions INSPECTION TECHNICIAN I/II Based at Rocket Lab's site in Silver Spring, Maryland, the Inspection Technician will be responsible for executing various aerospace inspections. You will support the Quality Inspector Supervisor and Space Systems organization. In this role, you'll inspect mechanical and electrical components for spacecraft assemblies, operate precision tools like CMMs and micrometers, and assemble flight mechanisms using production drawings. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! (Please note: this position can be hired at the Inspection Technician I or Inspection Technician II level) WHAT YOU'LL GET TO DO: Inspect mechanical and electrical components before use in traceable spacecraft assemblies Use and maintenance of Coordinate Measurement Machines (CMM), calipers, micrometers, gages, comparators, hardness testers, and other common mechanical inspection tools. Create Standard Operating Procedures for specific mechanical parts. Communicate findings through written standardized documentation and verbal discussion. Assemble space flight mechanisms following written production drawings and procedures. Idea generation of potential process improvements. Shipping and receiving components according to standard company procedures. YOU'LL BRING THESE QUALIFICATIONS AS AN INPSECTION TECHNICIAN I: 2+ years of quality inspection experience in a highly regulated production or manufacturing environment Familiarity with common manufacturing processes. Familiarity with common aerospace inspection tools, e.g. calipers, multimeters, micrometers, gages, comparators, etc. Familiarity with common aerospace assembly tools, e.g. torque wrenches, force gages, load cells, scales, etc. YOU'LL BRING THESE QUALIFICATIONS AS AN INPSECTION TECHNICIAN II: 5+ years of quality inspection experience in a highly regulated production or manufacturing environment Familiarity with common manufacturing processes. Familiarity with common aerospace inspection tools, e.g. calipers, multimeters, micrometers, gages, comparators, etc. Familiarity with common aerospace assembly tools, e.g. torque wrenches, force gages, load cells, scales, etc. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: At least 8+ years engineering experience in the aerospace industry. Candidate has capacity to comply with the federally mandated requirements of U.S. export control laws. Direct inspection or design experience with parts complying to the ASME Y14.5 standard. Familiarity with use of CMM. Strong technical and mechanical capability. Familiarity with simple electrical schematics and components. Attention to detail necessary to verify inspected components meet required specifications. Integrity and focus to follow and execute procedures. Familiarity with common geometric dimensioning and tolerancing (GD&T) practices. Passion for doing excellent work with mechanisms and physical assemblies. Mechanically inclined and able to troubleshoot basic equipment issues Self-motivated mind-set. Effective verbal and written communication abilities. Desire to work in a small-company environment. ADDITIONAL REQUIREMENTS: Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Must be able to climb ladders and be comfortable working in tight spaces. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces #RL1 Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored HSA plan option, dental and vision coverage, 3 weeks paid vacation and 7 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, flex schedule, free breakfast and lunch catered 2x/week, and free snacks/drinks. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (MD Only)$16-$25 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Zachary Piper Solutions is seeking a Quality Control Inspector to support operations in Annapolis Junction, Maryland. This role will ensure quality compliance by reviewing documents, leading inspections, and coordinating with stakeholders for successful project delivery. Responsibilities for the Quality Control Inspector include: * Review contract and design documents for compliance and constructability. * Lead 3-Phase QC process and develop installation checklists. * Conduct inspections, manage punch lists, and report quality data. * Coordinate with GC/Owner and resolve quality issues. Qualifications for the Quality Control Inspector include: * Minimum 4 years of experience in construction, estimation, or quality control. * Journeyman License required or ability to obtain. * Proficient in interpreting contracts, drawings, BIM models, NEC codes, and industry standards. * Strong communication, attention to detail, organizational skills, and computer proficiency. * Associate's degree in a technical discipline or equivalent quality-related experience. Compensation for the Quality Control Inspector include: * Salary Range: $75,000 - $85,000 based on years of experience * Benefits: Medical, Dental, Vision, 401k Plan, PTO (Paid Time Off), Holidays, Sick leave as required by law This job opens for applications on 1/12/2026. Applications for this job will be accepted for at least 30 days from the posting date Keywords: Quality Control, Construction, Compliance, Inspections, 3-Phase QC, Contract Review, Document Review, Specifications, Drawings, Submittals, Constructability, Installation Checklists, Punch Lists, Continuous Improvement, Safety Meetings, Project Meetings, GC Coordination, Owner Coordination, Commissioning, NEC Codes, NETA Standards, BIM Models, Estimation, Technical Discipline, Journeyman License, Manufacturing Environment, Quality Processes, Production, Shipping, Receiving, Communication Skills, Attention to Detail, Organization, Computer Literacy, Fast-Paced Environment, Problem Solving, Stakeholder Engagement, Quality Assurance, Field Inspections, Definable Features of Work, Preparatory Meetings, Initial Inspections, Follow-Up Inspections, Data Analysis, Reporting, Construction Standards, Electrical Codes, Industry Standards, Project Delivery, Quality Issues, Resolution, Contractual Requirements, Construction Documents, Safety Compliance, Quality Management, Construction Quality, Technical Expertise, Project Coordination, Quality Monitoring, Risk Mitigation, Quality Documentation, Quality Audits, Quality Planning. #LI-VC1 #LI-ONSITE

The Quality Control Inspector ensures that all Firm-Fixed-Price (FFP) work under IDIQ contracts comply with the specified quality standards, contract requirements, and applicable codes. The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Essential Duties and Responsibilities Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes. Develop and maintain project-specific Quality Control Plans (QCPs) tailored to each task order. Conduct and document three-phase inspections (Preparatory, Initial, Follow-Up) for all definable features of work. Coordinate with subcontractors, government representatives, and project managers to resolve quality issues. Prepare daily and weekly QC reports with photographic documentation and accurate records of observations. Ensure compliance with safety standards and proactively report any unsafe conditions. Participate in pre-task planning, submittal reviews, and material/equipment verifications. Verify and document corrective actions and non-conformance resolutions. Support audits and final inspections for project closeouts. Knowledge, Experience and Skill Requirements High school diploma or equivalent; technical certification or associate degree preferred. Minimum of 3 years of construction quality control experience on federal, IDIQ, or FFP-type contracts. Familiarity with USACE/NAVFAC 3-phase QC system is highly preferred. Strong working knowledge of construction methods, materials, codes, and QA/QC standards. Excellent documentation, organizational, and communication skills. Proficient with basic computer applications (Word, Excel, QC software). Must be able to pass security clearance and background check as required by federal contracts. Physical, Environmental and Sensory Requirements Work may be performed at active construction sites in varying weather conditions. Frequent travel may be required to support multiple task orders across a geographic region. Must be able to lift to 50 lbs., climb ladders, and navigate uneven terrain. Limited exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc. but generally not to the point of being disagreeable. Disclaimer We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $ $54,400 - $81,600. This position may also be eligible for a wide range of competitive benefits that can include but not limited to medical, well-being, financial planning and short-term incentives benefits.  Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. Apply technical knowledge and expertise in determining proper equipment installation and operation. Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. Review and approve locally developed procedures and solutions to complex repair situations. Perform analysis of defects and interprets quality control rejection and failure trends. Monitor safety, training, and certification requirements. Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. Maintain Quality, Safety, Training and Certification Records. Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. Inspect forms and records related to aircraft maintenance. The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Comply with work order timekeeping system procedures. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. Maintain situational awareness, stay cognitive-focused, and mitigate risks. Comply with processes and procedures as per DHS/DOD documents and publications. Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. Perform weekly break room and smoking area cleaning duties. Perform other duties as assigned. Minimum Requirements Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent is required. Five (5) years of aircraft maintenance experience. Valid Airframe and Power Plant (A&P) License required. Valid FAA Inspection Authorization (IA) required. Possess a valid United States driver's license. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Ability to read and interpret data is required. Ability to read, write, speak and understand English. Physical Requirements/Working Environment: Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. May be required to work night shifts. May work in Aircraft maintenance hangar or outside. Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

The Quality Control Inspector oversees the Quality Control Program for the HVAC Mechanics and enforces adherence to the ISO standards and procedures. Assigned to the development, administration, and daily functions of the quality control program, this position shall be fully trained in their areas of responsibility including - instruction and procedure development; product quality monitoring; inspection techniques; and inspection data management and analysis. Shift: Part-Time, flexible. 2-3 days per week (Monday - Friday between 6:00am-6:00pm). 20-24 hours per week Pay Rate: $44.57 per hour Essential Job Functions: Quality management plans and supporting documentation to ensure that HVAC projects are being built safely on budget, on schedule, within scope, and in conformance with applicable regulations and guidelines. Administering the Quality Assurance Program throughout the contract for HVAC specific work order tickets Assigned to the development, administration, and daily functions of the Quality Assurance Program, shall be fully trained in their areas of responsibility which may include: instruction and procedure development; product quality monitoring; inspection techniques; and inspection data management and analysis. Oversees and can authorize the procurement of project safety supplies and equipment and is responsible for the implementation of the site safety training of employees and subcontractor safety training. Submit daily field notes recording activities at each project site; prepare and coordinate material submittal sheets and shop drawing submittals; and prepare quality control reports. Establish and maintain quality standards for services rendered. Recommend any necessary adjustments and changes to PM processes. Make recommendations to HVAC Mechanics on how they can correctly or more efficiently complete work or tickets and PMs. Inspect and test the services and equipment maintained. Perform inspections at random to assess quality of services. Complete weekly and monthly QC checks on completed preventative and reactive maintenance work tickets related to HVAC systems. Ensure accurate completion of assigned work tickets for maintenance tasks. Manage quality management plans and supporting documentation to ensure that projects are completed on budget, on schedule, within scope, and in conformance with applicable regulations and guidelines. Assist with logistics and administrative duties as needed. Support PM in developing integrated logistics support. Ensure operations and maintenance contract scope is understood by site team. Attend required stakeholder meetings, training programs, and reinforce requirements within the team. Other duties as assigned. Qualifications Required Skills, Experience, and Education: High School Diploma or Equivalent Ability to obtain a Top Secret clearance 5 years minimum of related experience in Quality Control, Quality Assurance, ISO Standards, or related 5 years minimum experience working with commercial HVAC systems Experience using CMMS systems Experience in working in operations and maintenance in commercial buildings Ability to multi-task and lead a project to completion Excellent verbale and written communication skills Excellent time management skills with a proven ability to meet deadlines Proficiency with Microsoft Office applications Analytical and problem solving skills Strong project estimating skills with a demonstrated ability to complete projects on time within budget Ability to multi-task, problem solve, and lead project to completion Facilities management inspection and administration with similar large-scale projects Must have the ability to prioritize and multi-task in a fast-paced environment Preferred Education, Skills, Licenses, and Certifications: Bachelor's degree in occupational health and safety, business management, statistics or related OSHA 10/30 USACE QCM HVAC journeyman license in VA Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The individual must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. Walking, stepping, climbing or otherwise moving from one location on the job site to another. Visually seeing equipment operations well (either naturally or with corrective lenses). Exposure to computer screens, monitors and other screens as necessary. Sitting for periods of time. Standing, stooping kneeling, squatting, climbing or sitting for long periods of time. •Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Working at elevated heights. Exposure to working outdoors in all-weather conditions. Adapting to outdoor conditions and prolonged exposure to sometimes adverse weather conditions. Remaining calm during emergencies and respond appropriately as dictated by the circumstance of the incident. Ability to lift and/or carry up to 50lbs. Able to work at heights up to 30 feet. Working Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock; and vibration. The noise level in the work environment is usually moderate to occasionally loud. ACTION FACILITIES MANAGEMENT, INC. (AFM) is a Woman-Owned Small Business (WOSB) and a Minority Business Enterprise (MBE) established in 2001 that provides services to government and commercial clients in 10 states and the District of Columbia. AFM's core competencies are in the areas of Integrated Facilities Management such as Operations and Maintenance, Janitorial Services, Security, Emergency Management, and Administrative Support.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Job Types: Part-time, Contract Pay: $1,600.00 per month Benefits: Flexible schedule Compensation Package: 1099 contract Work Location: On the road

As a Property Inspector/Resident Services Administrator, the primary responsibilities are to maintain an attractive, safe and pleasing environment for residents by performing walking inspections at managers' discretion. Keep a daily log of the homes inspected and violations noted. Maintain positive, professional relationships with the commercial and residential/tenants and owners, as well as management and vendors. Your Responsibilities: * Be knowledgeable of all Association Governing Documents, Rules and Regulations and general legal requirements of a community association * Provide excellent customer service and maintain open lines of communication with fellow Associates, homeowners and Board of Trustees * Have general knowledge and understanding of building systems and components * Follow all policies and procedures of the Company * Work closely with Management to learn all responsibilities of site operations * Perform site inspections * Log violations in system. * Log work requests in Connect and generate work orders for maintenance staff and/or contractors * Update work order log with notes and action taken by vendors. * Close open work orders in system when complete by vendor. Work order is not considered complete unless the vendor has signed original work order and returned to office. * Provide Community Manager with work order log for inclusion in Board package. * Provide excellent customer service and maintain open lines of communication with fellow * Associates, homeowners and Board of Trustees * Update and maintain community information in portal, including but not limited to the community website, community projects, management reports and all association documents and forms * Provide customer service assistance to homeowners as needed. Assist with homeowners' calls and inquires and respond accordingly or direct to the appropriate party. * Log all homeowner inquires in call log * Conduct business at all times with the highest standards of personal, professional and ethical conduct. * Perform or assist with any operations as required to maintain workflow and to meet schedules. * Notify supervision of unusual equipment or operating problems and the need for additional material and supplies. * May participate in any variety of meetings and work groups to integrate activities, communicate issues, obtain approvals, resolve problems and maintain specified level of knowledge pertaining to new developments, requirements, policies, and regulatory guidelines. * Ensure all safety precautions are followed while performing the work. * Follow all policies and Standard Operating Procedures as instructed by Management. * Perform any range of special projects, tasks and other related duties as assigned. Skills & Qualifications: * 2 years' experience in a service-related industry * Demonstrated verbal and written communication * Reliable transportation * Ability to work independently * Demonstrated experience handling conflict resolution Physical Requirements: * Position involves sitting, standing, stooping, kneeling, pushing, shoving, lifting, carrying and moving objects that can weigh up to 50 lbs or more following appropriate safety procedures. This movement can occur throughout the day. You must also be able to climb several flights of stairs if necessary. * Must be able to drive - Some local travel by personal vehicle is required * Must be able to sit and stand for extended periods of time. * Must be able to communicate both on the phone and in person with our clients to resolve issues and manage the business. * Must have finger dexterity for typing/using a keyboard. * Must be mobile enough to move around both the office, to make copies, send mail and faxes and to walk around the property. This could include lengthy walks on uneven areas. * Talking and hearing occur continuously in the process of communicating with guests, supervisors, and other associates. * Capable of working extended hours, including evenings, weekends and holidays as necessary. * This position may alternate between working indoors in a controlled climate and with proper lighting, to an outdoors setting with variable climate and lighting. * Must be able to interact with all types of individuals, be mentally alert, detail oriented, and with good reasoning skills. * Must be able to work on more than one assignment at a time with frequent interruptions, changes and delays. Must be able to remain focused and work effectively, efficiently, and cheerfully under such circumstances. For safety reasons, employees must remain alert to working conditions and aware of safety, health, and environmental concerns. * Must be able to work effectively and cheerfully in an environment which may be stressful due to adversarial situations resulting from the proper performance of duties What We Offer: As a full-time exempt associate, you will be eligible for full comprehensive benefits to include your choice of multiple medical plans, dental, and vision. In addition, you will be eligible for time off benefits, paid holidays and a 401k with company match. Occasional travel may be required to attend training and other company functions. Compensation: $19-$23 per hour Disclaimer Statement: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. This is not an all-inclusive job description; therefore, management has the right to assign or reassign schedules, duties and responsibilities to this job at any time. Automated Employment Decision Tool (AEDT) Usage: We may utilize an Automated Employment Decision Tool (AEDT) in connection with the assessment or evaluation of candidates. The AEDT is designed to assist in objectively evaluating candidate qualifications based on specific job-related characteristics. Job Qualifications and Characteristics Assessed: The AEDT evaluates candidates based on job qualifications and characteristics pertinent to the role, including skills, experience, and competencies relevant to the position requirements. These qualifications are determined by the unique needs of each role within our company. Alternative Selection Process or Reasonable Accommodations: Candidates who require an alternative selection process or a "reasonable accommodation," as defined under applicable disability laws, may make a request through our designated contact channel national_****************************. Requesting Information About the AEDT - NYC Local Law 144: Candidates who reside in New York City and are subject to NYC Local Law 144 may request information about the AEDT, including details on the type of data collected, the sources of such data, and our data retention policies. To submit a request, please contact us at national_****************************; we will respond in accordance with Local Law 144, within 30 days.

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Full-time hours requirement is 40 hours a week. Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

The Quality Control Inspector ensures that all Firm-Fixed-Price (FFP) work under IDIQ contracts comply with the specified quality standards, contract requirements, and applicable codes. The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. **Essential Duties and Responsibilities** + Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes. + Develop and maintain project-specific Quality Control Plans (QCPs) tailored to each task order. + Conduct and document three-phase inspections (Preparatory, Initial, Follow-Up) for all definable features of work. + Coordinate with subcontractors, government representatives, and project managers to resolve quality issues. + Prepare daily and weekly QC reports with photographic documentation and accurate records of observations. + Ensure compliance with safety standards and proactively report any unsafe conditions. + Participate in pre-task planning, submittal reviews, and material/equipment verifications. + Verify and document corrective actions and non-conformance resolutions. + Support audits and final inspections for project closeouts. **Knowledge, Experience and Skill Requirements** + High school diploma or equivalent; technical certification or associate degree preferred. + Minimum of 3 years of construction quality control experience on federal, IDIQ, or FFP-type contracts. + Familiarity with USACE/NAVFAC 3-phase QC system is highly preferred. + Strong working knowledge of construction methods, materials, codes, and QA/QC standards. + Excellent documentation, organizational, and communication skills. + Proficient with basic computer applications (Word, Excel, QC software). + Must be able to pass security clearance and background check as required by federal contracts. **Physical, Environmental and Sensory Requirements** + Work may be performed at active construction sites in varying weather conditions. + Frequent travel may be required to support multiple task orders across a geographic region. + Must be able to lift to 50 lbs., climb ladders, and navigate uneven terrain. + Limited exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc. but generally not to the point of being disagreeable. **Disclaimer** **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $ $54,400 - $81,600. This position may also be eligible for a wide range of competitive benefits that can include but not limited to medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of aircraft maintenance experience. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Zachary Piper Solutions is seeking a Quality Control Inspector I to support a premier federal IT provider based out of Annapolis Junction, MD. The Quality Control Inspector I will be responsible for reviewing contract and design documents for compliance, implementing the 3-Phase Quality Control process, conducting detailed inspections and resolving quality issues, and collaborating with project teams and owners to ensure adherence to safety and quality standards. Responsibilities of the Quality Control Inspector I includes: * Review and Compliance: Examine contract documents, specifications, drawings, and submittals for compliance and constructability. * Quality Control Implementation: Apply the 3-Phase QC approach (Preparatory, Initial, Follow-up) and create detailed installation checklists for field teams. * Inspection and Issue Resolution: Conduct thorough field inspections, manage quality and commissioning punch lists, and collaborate with GC/Owner to resolve issues. * Data and Communication: Collect and analyze quality data for continuous improvement, participate in safety and project meetings, and communicate requirements to the project team. Qualifications for the Quality Control Inspector I includes: * Associates degree in a technical discipline or relevant experience * At least 4 years of hands on experience in consruction, estimation, and/or quality control activies * Ability to obtain electrical journeyman license with in 6 months of starting * US Citizenship with valid passport is required Compensation for the Quality Control Inspector I includes: * Salary Equivalent: $80,000 - $190,000+ depending on experience * Benefits: PTO, Paid Holidays, Cigna Healthcare, Dental, Vision, 401k, This job opens for applications on 1/13/2025. Applications for this job will be accepted for at least 30 days from the posting date #LI-AC2 #LI-Onsite #pando Quality Control, QC Program, field inspections, safety compliance, contract document review, RFP, specifications, drawings, submittals, design review, constructability, 3-Phase Quality Control, preparatory meetings, initial inspections, follow-up inspections, installation checklists, detailed inspections, continuous improvement, data collection, safety meetings, project meetings, punch-list management, commissioning, GC interface, owner interface, NEC codes, NETA standards, BIM models, electrical license, Journeyman license, Master electrician, construction experience, estimation, quality control activities, communication skills, attention to detail, organized, computer literate, fast-paced environment