Inspector jobs in Baytown, TX - 352 jobs

IRISNDT is currently seeking a NACE CIP Level 1 and Level 2 Inspectors for a full time, call out positions. The Coating Inspectors shall possess knowledge and skills relating to the application of protective coatings to pipelines, fabricated piping, and storage tanks. The inspector should be familiar with and have experience in applying protective coatings, operating lest equipment, monitoring the application of the coatings, and enforcing company, industry and manufacturers specifications. The inspector must be familiar with safety standards applicable to coating applications as set forth in OSHA Construction Industry Standards. Primary Functions: • Performs assigned routine tests on materials, services in process, or finished projects where results are compared with company quality standards. Reports results to supervisor who will make an analysis and take necessary action. • Inspects visually for obvious defects. • Performs detailed visual inspection when necessary to determine quality of prodcut/service where limits are not clearly defined. Identifies defective work and helps put corrective actions in place. • Records results on inspection forms or charts and reports number of defects found. Posts and maintains forms and charts of inspection data, quality levels, or special quality studies. • May act as quality control department clerk, maintaining all quality records for facility. • Verifies that all materials used in the performance of the job assignment are in compliance with Client Company requirements. • Cooperates and works closely with the Repair/Cut-Out Welding Inspector, NDT and Contractor's Representative to assure that no repairs or cutouts are coated and lowered-in. • Assures that all specifications and safety standards are adhered to. • Records and reports material usage and waste. Qualification & Skill Requirements: High School Diploma or equivalent is required Minimum of two (2) years of experience in the application or inspection of coating in the petroleum or chemical industries, or One (1) year experience in the application or inspection of coating and either NACE CIP level 1 certification or SSPC PC1 level 1 certification. Current NACE CIP Level 1 or Level 2 certification required API 510/570 certifications considered an asset Valid TWIC card required Valid Driver's License and pre-access drug and alcohol testing required Pre-employment background checks will be required Please note: API 1169 Certification is required for all Inspectors by January 1, 2019. Physical Requirements: Move, carry, and lift objects 50 lbs. or more. Must be able to walk, stand, bend, reach, and climb. Must be able to work indoors and outdoors in all weather conditions. Benefits: Dental Insurance. Vision Insurance. Health Insurance. Paid Time Off. 401(K) W/Matching. Flexible Spending Account. Health Savings Account. About IRISNDT: IRISNDT is a tech-enabled value-adding service provider of Non-destructive Testing (NDT), Advanced NDT, Inspection, Asset Integrity Engineering, Software, and Specialized Mechanical Services to the chemical and petrochemical, refining, renewables, power, mining and other diverse end markets in the USA, Canada, the United Kingdom, and Australia. Join IRISNDT to build a promising career. Our dynamic environment offers advanced technology and ongoing learning, placing you at the forefront of industry innovation. We prioritize a strong safety culture and invest in our team, promoting a family-friendly workplace and internal career advancement. With IRISNDT, elevate your career where progress and excellence converge. We boast a team of over 2,000 dedicated staff members worldwide, our growth has been driven by seasoned management, robust technical expertise, and an unwavering commitment to exceeding customer expectations. For more information, visit our website at **************** NOTE: To be considered, applicants must be able provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification.

About the job QC inspector QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: * Community "We care for our communities" * Integrity "We act with integrity" * Passion "We infuse passion into everything we do" * Quality "We believe quality comes from a culture of innovation and continuous improvement" * Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking an experienced SWPPP Inspector, to join our Environmental team in Houston, TX. The duties of the SWPPP Inspector will be to inspect construction activities to ensure compliance with environmental features of project plans and environmental commitments made to our customer with respect to the project construction and potentially impacted environmental features reporting observations orally and in writing to customer site contact. Other duties will include: * Inform Environmental Compliance Inspectors and/or other members of the Environmental Compliance Team of observations, violations, activities, etc. * Contact supervisor for priorities and deadlines in the field. * Resolve differences in the interpretation of plans and specifications. * Ensure the safe utilization, storage and maintenance of all documents and tools. * Update Direct Report on progress and delays on every task or assignment. * Ensure safe usage and maintenance of individually assigned company vehicle and field equipment. * Meet established project deadlines. * Carry out assigned duties in accordance with established procedures. * Prepare and submit accurate, legible, comprehensive and complete inspection reports on a daily basis in accordance with established quality procedures. * Review plans, specifications, and shop/working drawings for project activities. * Meet with contractor's supervisors or other project leaders on assigned project sites to discuss and coordinate environmental compliance activities, corrections to existing controls, and implementation of additional controls. * Prepare reports on findings to ensure compliance with applicable state and federal environmental laws, rules, regulations, and policies. * Evaluate environmental impact of construction activities including water quality/wetland/hazardous material geological, cultural or historic resources. * Keep abreast of current environmental developments to include laws, regulations, policies and procedures. * Responsible for maintenance and update of water quality records such as Storm Water Pollution Prevention Plans. * Monitor and evaluate the effectiveness of environmental controls. * Perform other duties as assigned. Qualifications: * High School Diploma or G.E.D. preferred but not required. * Possess a valid driver's license within the applicable jurisdiction and meet company's auto insurability requirements. Some knowledge of: * Environmental laws, regulations, and mitigation requirements. * Commercial construction, plans, construction inspection procedures, and specifications * Reading and interpreting specifications. * Materials used in Commercial construction. General knowledge of erosion control procedures. Ability to work under exposure to inclement weather conditions, travel to project sites and maneuver over rough and uneven terrain. Ability to work independently. Ability to read and understand instructions, labels, reports, etc. Ability to effectively communicate information both written and oral and respond to questions in person-to-person and small group situations with customers, clients, the general public and other employees of the organization. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. May be regularly required to stand, walk, and drive vehicle short and/or long distances. Occasionally required to climb or balance, stoop, kneel, crouch, or crawl. Frequently required to talk or hear. Occasionally required to lift and/or move up to, 50 pounds. Specific vision abilities required by this job include close vision, distant, color peripheral vision, depth vision, and ability to adjust focus. May be occasionally exposed to work near moving mechanical parts, fumes or airborne particles and frequently exposed to outdoor weather conditions. Noise level for this position is loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work responsibilities may require out of town travel to Raba Kistner offices, client offices and project locations. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

The API Inspector is responsible for performing inspections on pressure vessels, piping, tanks, and other static mechanical equipment in accordance with applicable API codes (e.g., API 510, API 570, API 653). The role ensures the mechanical integrity and safety compliance of assets during operations, turnarounds, and outages. Key Responsibilities: Conduct internal and external inspections of equipment in accordance with API 510, 570, and/or 653 standards. Evaluate the condition and integrity of pressure vessels, piping systems, and aboveground storage tanks. Prepare detailed inspection reports and document findings using digital reporting tools or databases. Interpret and apply applicable codes, standards, and client specifications. Coordinate with engineering, maintenance, and operations teams to prioritize inspection tasks. Recommend repair or replacement strategies based on inspection findings. Assist with developing inspection plans and schedules for routine and turnaround inspections. Maintain inspection certifications and stay current with updates to API codes and best practices.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Audubon is currently seeking a QAQC Inspector to join our team in our Houston, TX Energy Corridor Office. PRIMARY RESPONSIBILITIES: Implementation of Audubon Construction Solutions Quality Management System and overall quality performance Manage the Quality Control and Assurance program for the project Assist the Project Managers to set up, monitor, and maintain the Quality Management System project execution tools. Assure proper Inspection Test Reports are implemented and fulfilled throughout duration for the project Liaise with Supervision to ascertain and integrate quality management techniques that would benefit the project. Assure compliance with Audubon Construction Solutions standards. Interface with Corporate Management for technical support in Mechanical, Civil, Coating, Electrical and Structural documentation and other quality related practices and applications Coordinates with Corporate Management for weld procedures and weld certifications and monitors weld program onsite Monitor surveillance trends, NCRs, and subsequently surveillance testing activities for the project. Communicate any non-conformance and defects that may impact requirements for design, safety assurance, construction, commissioning, maintenance, or operations Maintain Inspection Test Plan for project activities and disciplines Maintain the Audubon Stage-Gate Project Management Process. Remain abreast of Industry "State of the Art" project management tools and practices. Health, Safety, and Environmental Responsibilities: All employees are responsible for supporting Audubon Companies' Health, Safety, and Environmental (HSE) policies and procedures. This includes: Performing duties in a manner that protects personal and team health and safety Participating in required HSE training, meetings, and reporting activities Identifying and reporting hazards, near misses, and unsafe conditions Following safe work practices and complying with applicable regulatory requirements EXPERIENCE AND SKILL REQUIREMENTS: CWI (Certified Welding Inspector) required. Multi discipline experience in Quality Assurance and Quality Control 10+ years' experience in construction company or related environment including 5 years' management experience. Excellent speaking, writing, communication, and organizational skills; public speaking a plus. Prior technical writing and/or project leadership experience a plus. Computer literate and familiar with MS Office software; SharePoint experience a plus. Computer literate in BlueBeam and NavisWorks No Recruiters, please! Equal Opportunity Employer/Veterans/Disabled

Apave America offers an employee-centric company culture, competitive pay, and opportunities to build a rewarding career full of growth & advancement. The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifying compliance with industry regulations. Conduct Inspections and Assessments Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage. Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks). Ensure compliance with relevant codes and standards (e.g., API, ASME, ASTM, NFPA, and OSHA). Prepare Inspection Reports Document findings from inspections, including any defects or non-conformities. Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions. Maintain records for future reference and regulatory compliance. Risk Assessment and Analysis Identify potential risks and hazards based on inspection findings. Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity. Assess the remaining life of equipment and suggest maintenance schedules to prevent failures. Non-Destructive Testing (NDT) Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects. Interpret NDT results and provide recommendations based on the findings. Regulatory Compliance and Safety Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols. Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards. Stay current with changes in regulations and industry practices. Collaboration and Communication Work with engineers, maintenance teams, and management to develop inspection schedules and action plans. Provide technical advice and guidance on repair and maintenance strategies. Communicate with contractors and third-party vendors regarding inspection requirements and results. Monitoring and Continuous Improvement Track and monitor equipment performance over time and report any changes or declines in condition. Recommend or implement improvements in inspection processes, techniques, or technologies to enhance efficiency and safety. Certification and Training Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies. Ensure that work is done in a manner that complies with both company procedures and industry best practices. Quality Assurance Ensure that inspections are carried out according to established quality assurance standards and practices. Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: High School Diploma or equivalent is required. Minimum of two (2) years' experience working with the 510, 570, and/or 653 certifications required. Minimum of API 510 and 570 certifications are required. Additional API 653 certification will be considered an asset. Certifications in NDT methods (MT/PT/UTT) would be considered an asset. Valid Driver's License and pre-access drug and alcohol testing required. Pre-employment background checks will be required. Work Conditions: Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders Working in a plant and/or shop area around production machinery with extreme noise levels Work from various levels of heights and/or confined spaces for long periods of time Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: Ability to lift, move, and carry objects weighing 75lbs. or greater Must be able to walk, sit, stand, bend, reach, and climb Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping Working extended hours and standing for extended periods of time Work in indoor and outdoor environments in conditions of extreme heat and/or cold Work in and near industrial hazards Must be able to walk and climb except when performing non-field duties Remain consistently active throughout shift Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations Must be able to wear safety equipment as required by the safety department for personal protection (PPE) Ability to maintain focus and multitask effectively Exhibit sensible and responsible behavior Ability to work autonomously or within a team environment NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. *** Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. *** We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community “We care for our communities” Integrity “We act with integrity” Passion “We infuse passion into everything we do” Quality “We believe quality comes from a culture of innovation and continuous improvement” Growth “We dedicate ourselves to personal and business growth” Raba Kistner is seeking an experienced SWPPP Inspector, to join our Environmental team in Houston, TX. The duties of the SWPPP Inspector will be to inspect construction activities to ensure compliance with environmental features of project plans and environmental commitments made to our customer with respect to the project construction and potentially impacted environmental features reporting observations orally and in writing to customer site contact. Other duties will include: Inform Environmental Compliance Inspectors and/or other members of the Environmental Compliance Team of observations, violations, activities, etc. Contact supervisor for priorities and deadlines in the field. Resolve differences in the interpretation of plans and specifications. Ensure the safe utilization, storage and maintenance of all documents and tools. Update Direct Report on progress and delays on every task or assignment. Ensure safe usage and maintenance of individually assigned company vehicle and field equipment. Meet established project deadlines. Carry out assigned duties in accordance with established procedures. Prepare and submit accurate, legible, comprehensive and complete inspection reports on a daily basis in accordance with established quality procedures. Review plans, specifications, and shop/working drawings for project activities. Meet with contractor's supervisors or other project leaders on assigned project sites to discuss and coordinate environmental compliance activities, corrections to existing controls, and implementation of additional controls. Prepare reports on findings to ensure compliance with applicable state and federal environmental laws, rules, regulations, and policies. Evaluate environmental impact of construction activities including water quality/wetland/hazardous material geological, cultural or historic resources. Keep abreast of current environmental developments to include laws, regulations, policies and procedures. Responsible for maintenance and update of water quality records such as Storm Water Pollution Prevention Plans. Monitor and evaluate the effectiveness of environmental controls. Perform other duties as assigned. Qualifications: High School Diploma or G.E.D. preferred but not required. Possess a valid driver's license within the applicable jurisdiction and meet company's auto insurability requirements. Some knowledge of: Environmental laws, regulations, and mitigation requirements. Commercial construction, plans, construction inspection procedures, and specifications Reading and interpreting specifications. Materials used in Commercial construction. General knowledge of erosion control procedures. Ability to work under exposure to inclement weather conditions, travel to project sites and maneuver over rough and uneven terrain. Ability to work independently. Ability to read and understand instructions, labels, reports, etc. Ability to effectively communicate information both written and oral and respond to questions in person-to-person and small group situations with customers, clients, the general public and other employees of the organization. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. May be regularly required to stand, walk, and drive vehicle short and/or long distances. Occasionally required to climb or balance, stoop, kneel, crouch, or crawl. Frequently required to talk or hear. Occasionally required to lift and/or move up to, 50 pounds. Specific vision abilities required by this job include close vision, distant, color peripheral vision, depth vision, and ability to adjust focus. May be occasionally exposed to work near moving mechanical parts, fumes or airborne particles and frequently exposed to outdoor weather conditions. Noise level for this position is loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work responsibilities may require out of town travel to Raba Kistner offices, client offices and project locations. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Day Schedule: 6 on / 3 off ( 12hr shifts).

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

According to the Harris County interlocal committee is handling property inspection on all the properties listed for tax sale in Harris County. Describe this position's Essential Functions: (Tasks, duties & responsibilities of the job. Outline the core responsibilities of the position. Highlight the day-to-day activities of the position). 1. Every month visit and inspect all properties posted for sale, take digital photos, and upload them daily on PJ picture PowerPoint. 2. Organize inspections for daily property inspections. Complete an average of 10-15 pictures per day (based on total sales per month) and upload them on PJ PowerPoint daily. 3. Contact property owners on occupied properties to ensure they are informed of the pending tax sale. 4. Add notes on inspections form and contact neighbors for any additional information. 5. Place a yellow sale sign on the door for all improved properties if no contact 6. Place a big yellow FOR SALE sign on all vacant lots to make owner and neighbors aware of tax sale. 7. Insert digital pictures and comments on PJ PowerPoint and complete the Presentation for management and client to view Friday before the interlocal. 8. Attend management (pre-inter-local) and client (interlocal) committee monthly meetings regarding tax sales. 9. Determine if the property matches the Harris County Appraisal District description and report any discrepancy to the attorney/Manager also contact HCAD for needed corrections 10. After the interlocal meeting - complete the re-visit of the properties recommended by interlocal committee client and provide updated status. 11. Provide daily/weekly work reports to management. Give advance notice to management if not able to meet the deadlines. 12. Order and keep in stock all necessary signs for tax sale notification. 13. Have regular involvement with Post-judgment management and staff. 14. Discuss the monthly work plan for next month, right after interlocal with the manager. Follow the guideline and meet the deadlines according to the calendar. . 15. Complete extra inspection assignments on no-tax sale cases promptly. 16. Utilize Bad Weather Day: Come to the office and catch up on all office-related paperwork, uploads, planning one extra visit, follow-up with HCAD, etc. 17. Any other duties assigned by the management The ideal candidate should possess the qualities below: Bilingual in English and Spanish required Excellent communication skills Team player Self-disciplined Time management skills Independent Computer skills Must have reliable transportation

Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community “We care for our communities” Integrity “We act with integrity” Passion “We infuse passion into everything we do” Quality “We believe quality comes from a culture of innovation and continuous improvement” Growth “We dedicate ourselves to personal and business growth” Raba Kistner is seeking an experienced SWPPP Inspector, to join our Environmental team in Houston, TX. The duties of the SWPPP Inspector will be to inspect construction activities to ensure compliance with environmental features of project plans and environmental commitments made to our customer with respect to the project construction and potentially impacted environmental features reporting observations orally and in writing to customer site contact. Other duties will include: Inform Environmental Compliance Inspectors and/or other members of the Environmental Compliance Team of observations, violations, activities, etc. Contact supervisor for priorities and deadlines in the field. Resolve differences in the interpretation of plans and specifications. Ensure the safe utilization, storage and maintenance of all documents and tools. Update Direct Report on progress and delays on every task or assignment. Ensure safe usage and maintenance of individually assigned company vehicle and field equipment. Meet established project deadlines. Carry out assigned duties in accordance with established procedures. Prepare and submit accurate, legible, comprehensive and complete inspection reports on a daily basis in accordance with established quality procedures. Review plans, specifications, and shop/working drawings for project activities. Meet with contractor's supervisors or other project leaders on assigned project sites to discuss and coordinate environmental compliance activities, corrections to existing controls, and implementation of additional controls. Prepare reports on findings to ensure compliance with applicable state and federal environmental laws, rules, regulations, and policies. Evaluate environmental impact of construction activities including water quality/wetland/hazardous material geological, cultural or historic resources. Keep abreast of current environmental developments to include laws, regulations, policies and procedures. Responsible for maintenance and update of water quality records such as Storm Water Pollution Prevention Plans. Monitor and evaluate the effectiveness of environmental controls. Perform other duties as assigned. Qualifications: High School Diploma or G.E.D. preferred but not required. Possess a valid driver's license within the applicable jurisdiction and meet company's auto insurability requirements. Some knowledge of: Environmental laws, regulations, and mitigation requirements. Commercial construction, plans, construction inspection procedures, and specifications Reading and interpreting specifications. Materials used in Commercial construction. General knowledge of erosion control procedures. Ability to work under exposure to inclement weather conditions, travel to project sites and maneuver over rough and uneven terrain. Ability to work independently. Ability to read and understand instructions, labels, reports, etc. Ability to effectively communicate information both written and oral and respond to questions in person-to-person and small group situations with customers, clients, the general public and other employees of the organization. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. May be regularly required to stand, walk, and drive vehicle short and/or long distances. Occasionally required to climb or balance, stoop, kneel, crouch, or crawl. Frequently required to talk or hear. Occasionally required to lift and/or move up to, 50 pounds. Specific vision abilities required by this job include close vision, distant, color peripheral vision, depth vision, and ability to adjust focus. May be occasionally exposed to work near moving mechanical parts, fumes or airborne particles and frequently exposed to outdoor weather conditions. Noise level for this position is loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work responsibilities may require out of town travel to Raba Kistner offices, client offices and project locations. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

Petroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details