Inspector jobs in Bellingham, WA

The QC Inspector's main responsibility is to inspect, accept or reject work performed in a particular discipline in compliance with applicable Codes and specifications. Discipline can be civil, structural, mechanical or piping. This posting is to gather a qualified pool of candidates as the need arises to hire for various maintenance and turnaround projects. Once an opening occurs, we will reach out to qualified candidates. Essential Functions Actively support the Company's commitment to safety and its “Core Values.” Represent the Company at all times with high moral standards while adhering to the Company's “Code of Business Conduct and Ethics.” Responsible to observe and follow all safety procedures and regulations at the job-site. Perform inspections and witness tests as required. Prepare reports and quality records in compliance with procedures. Coordinate areas of QC work with other department's work, such as, start-up, engineering, process, etc. Perform receipt inspections of material for work area in conjunction with material control staff as required. Perform system verification on completed systems to assure correct installation per design specifications. Control measuring and test equipment, as required to insure accuracy. Perform additional assignments per supervisor's direction. Qualifications 2+ year's minimum experience. AWS CWI minimum required. API 653 certification preferred. Should be familiar with ASME Sec. VIII, Sec. IX, B31.1, B31.3, API ************* Codes Strong understanding of corporate and industry practices, processes and standards and their impact on project activities. Excellent oral and written communication skills; good computer skills including MS Word and Excel. Washington law requires pay information in job postings. The typical hiring range for this position in Washington is shown below. The pay rate will depend on the successful candidate's qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range. Hiring range: $45.62 to $52.13 per hour Full range for this position, available over time: $45.62 to $52.13 per hour In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets/Affirmative Action Employer We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

* - SUPERVISORY RESPONSIBILITIES: None QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education development certificate (GED). 1-3 years' experience in the laboratory using GC, HPLC techniques, etc. Internships and research experience will be considered Knowledge of HS&E procedures and associated governmental regulations. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, decimals and basic algebra. REASONING ABILITY: Ability to solve practical problems and apply common sense understanding to deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret and carry out a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSE, REGISTRATIONS: Valid drivers license required. * PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle, or feel objects, tools, or controls; reach with hands, and arms; and climb or balance. The employee frequently is required to stoop, kneel, crouch, or crawl; talk and hear; and taste and smell. The employee is occasionally required to sit. Employee is frequently required to climb and descend stairways, ladders, and gangways. Work regularly near mechanical parts and with explosive material. The employee must regularly lift and/or move and/or climb with up to 50 pounds and occasionally lift and/or move up to 100 pounds (with assistance). Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those and employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works in high, precarious places; in outside weather conditions; and near flammable material. Is regularly exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, extreme cold, and extreme heat and risk of electrical shock. Possibility of working in enclosed spaces. Occasionally exposed to risk of radiation. Appropriate safety training is provided. The noise level in the work environment is usually moderate to loud. Job Type: Full-time SUMMARY: Visit client facilities, including barges and ships, shore tanks, railcars, and tank trucks for quantity surveys of a variety of commodities including petroleum and petrochemicals and collects samples, for laboratory analysis. Perform laboratory test to determine chemical and physical characteristics or composition for such purpose as quality control, process control or product development. * SUMMARY: Visit client facilities, including barges and ships, shore tanks, railcars, and tank trucks for quantity surveys of a variety of commodities including petroleum and petrochemicals and collects samples, for laboratory analysis. Perform laboratory test to determine chemical and physical characteristics or composition for such purpose as quality control, process control or product development. ESSENTIAL DUTIES AND RESPONSIBILITIES: include the following. Other duties may be assigned. Receive orders, obtains information, and gather paperwork from Operations Supervisor(s) on movements. Obtain and label samples, gauges shore tanks, vessel(s), barge(s), railcar(s), and/or tank truck(s) as specified per job order. Promptly and safely deliver samples to an Inspectorate laboratory for analysis or turn in for retain, or deliver to client facilities for analysis or retain. Promptly and accurately calculate quantities and/or results and complete all required paperwork and distributes copies appropriately. Operate laboratory equipment and instruments such as microscopes, centrifuge, agitators, viscosimeter, chemical balance scales, spectrophotometer, gas chromatograph, colorimeter, and other equipment. Test, prepare or add chemicals to meet required specifications. Record and write test results on standardized forms and describing procedures used. Prepare graphs and charts. Ensure that all equipment is clean, sterilized and in good operating condition. This includes safety and monitoring equipment appropriate to the job. Reports to job-site punctually and observes all Inspectorate applicable federal and state regulations and standards, Terminal, Refinery, and/or vessel requirements, including safety and measurement standards. Attend "Key Meetings" with external personnel ashore and/or abroad. Represent Inspectorate by appearance and conduct. Behave ethically at all times. Communicate any problems, discrepancies, or other noteworthy incidents to the Operations Supervisor and/or Dispatcher without delay. Maintain a 24-hour on-call status including weekends and holidays. Support and participates in Inspectorate's Business Management System (BMS). Attend company meetings as required.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Hiring Bonus: $1000 after successful completion of 120 days and an acceptable attendance record ABW has an immediate opening for a Certified Welding Inspector (CWI) who is motivated and will take pride in producing quality fabricated parts and meeting or exceeding customer requirements and schedules. The tasks to perform this job successfully may include the following. Other tasks may be assigned. Performs inspections and tests per QC Manual, QA Manual, procedures, instructions, drawings, and travelers at specified stages in production process Inspects and/or tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality of products or materials Records inspection and test data Evaluates inspection and/or test data and writes reports to validate or indicate deviations from existing manuals, procedures, instructions, drawings, or travelers Recommends modifications of existing quality or production manuals, procedures, instructions, drawings, or travelers to achieve optimum quality within limits of equipment capability Sets up and performs nondestructive tests on materials, parts, or products to measure performance or material characteristics, as applicable Benefits include health, dental, vision and voluntary benefits. 2 weeks of PTO per year to start. Day shift: Work four 10-hour shifts, Monday through Thursday, 6 am-4:30 pm. Overtime as required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and depth perception. ABW is a leader in the Aerospace, Defense, Nuclear and Energy industries. Our diversity allows us to maintain a prominent level of fabrication production during any downturn or difficult time. If you are looking for a career that offers high pay and outstanding benefits, we have a job opportunity for you! ABW is an equal opportunity employer. Job Type: Full-time Day Shift & Swing Shift Expected hours: 40 per week Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance

The QC Inspector's main responsibility is to inspect, accept or reject work performed in a particular discipline in compliance with applicable Codes and specifications. Discipline can be civil, structural, mechanical or piping. This posting is to gather a qualified pool of candidates as the need arises to hire for various maintenance and turnaround projects. Once an opening occurs, we will reach out to qualified candidates. Essential Functions Actively support the Company's commitment to safety and its “Core Values.” Represent the Company at all times with high moral standards while adhering to the Company's “Code of Business Conduct and Ethics.” Responsible to observe and follow all safety procedures and regulations at the job-site. Perform inspections and witness tests as required. Prepare reports and quality records in compliance with procedures. Coordinate areas of QC work with other department's work, such as, start-up, engineering, process, etc. Perform receipt inspections of material for work area in conjunction with material control staff as required. Perform system verification on completed systems to assure correct installation per design specifications. Control measuring and test equipment, as required to insure accuracy. Perform additional assignments per supervisor's direction. Qualifications 2+ year's minimum experience. AWS CWI minimum required. API 653 certification preferred. Should be familiar with ASME Sec. VIII, Sec. IX, B31.1, B31.3, API ************* Codes Strong understanding of corporate and industry practices, processes and standards and their impact on project activities. Excellent oral and written communication skills; good computer skills including MS Word and Excel. Washington law requires pay information in job postings. The typical hiring range for this position in Washington is shown below. The pay rate will depend on the successful candidate's qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range. Hiring range: $45.62 to $52.13 per hour Full range for this position, available over time: $45.62 to $52.13 per hour In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets/Affirmative Action Employer We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

* Shift differentials for Weekend Shift Dogwood Industries - Who We Are Build your future with Dogwood Industries! Dogwood Industries is at the forefront of designing and manufacturing Pre-engineered Panelized Relocatable Metal Buildings, delivering industry leading solutions for mission-critical projects across industrial and DoD markets. Through a precise blend of manufacturing and construction, we build high-performance, rapidly deployable structures that keep critical missions moving forward. Our team provides leadership in the design process that transforms the way our clients work by delivering buildings as equipment solutions in harsh environments around the world. If you are motivated by innovation, thrive in a fast-paced setting, and want to be part of a team that is rapidly growing and revolutionizing the building industry, we'd love to speak with you! General Job Description Dogwood Industries LLC is seeking an experienced Quality Control Inspector (QCI) to join our team in Sedro-Woolley, WA. A successful candidate will be experienced in inspection procedures in an industrial setting and will demonstrate an understanding of quality control procedures and key elements of the inspection process and documentation thereof. Duties & Responsibilities The core responsibility of the QCI is to inspect and report non-conformances in accordance with drawings, inspection checklists or other specifications identified in the quality assurance plan. Daily, the QCI may be engaged in these activities: * Identify defective or non-conforming work * Issue reports and document resolution of non-conforming conditions * Execute and document specific test plans * Maintain and distribute accurate drawings and red line corrections * Maintain quality control records, documents, and logs * Perform incoming material inspections and vendor inspections when required * Perform first article, visual and dimensional checks at all stages of production * Other duties as assigned Requirements Requirements * Familiarity with AWS D1.1/AWS D1.2 weld inspection * Strong organizational and communication skills * Ability to manage change along with competing priorities * Fluency in English with excellent written and oral skills * Proficiency in standard Office computer applications * CWI certification is a plus Qualifications * 1+ years' experience in quality control * Minimum high school diploma or vocational degree * Experience in steel fabrication or general construction * Ability to read and understand engineering drawings and shop drawings Physical Requirements/Work Environment This position requires moderate physical activity in a manufacturing environment. While performing the duties of this job, the employee is regularly required to have full range of mobility in upper and lower body, able to reach overhead, able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling, squatting; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance for extended periods of time. Be able to lift 60 pounds of weight when required. The employee will be exposed to shop elements such as noise, dust, fumes, and odors. Compensation $28.00 - $38.00 hourly, depending on experience and qualifications. Shift differentials for Weekend Shift Benefits * Health Benefits, including medical, dental and vision * Company paid and supplemental life insurance * Short-term disability * Long-term disability * Additional voluntary benefits * Paid vacation, paid sick leave and paid holidays * 401(k) retirement plan, with employer match * Employee Referral Bonus Program Applicant Notes * Applicants must provide complete work history with employer references for last three to five years * All employees are subject to a pre-employment background check and pre-employment and random drug testing. Due to working in / being exposed to a safety sensitive environment, THC testing will occur as part of all drug screens. Application Assistance If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Dogwood's HR department at ************** or ************************. Location This position is based out of the Dogwood Factory Office at 500 Metcalf st, Sedro-Woolley, WA 98284. There may be travel to the Dogwood Everett, WA Factory as needed. Equal Employment Opportunity: All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other status protected by law. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. Disclaimer: Although the Company has attempted to accurately and thoroughly describe this position, the Company reserves the right to change the same, including to change, add to or subtract from the duties outlined, within the sole discretion of the Company, at any time, with or without advance notice. In order to meet company deadlines, work in excess of 40 hours per week may be required from time to time. PM22

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Island, San Juan, Skagit, Whatcom Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

FORTNA partners with the world's leading brands to transform omnichannel and parcel distribution operations. Known world-wide for enabling companies to keep pace with digital disruption and growth objectives, we design and deliver solutions, powered by intelligent software, to optimize fast, accurate and cost-effective order fulfillment and last mile delivery. Our people, innovative approach and proprietary algorithms and tools ensure optimal operations design and material and information flow. We deliver exceptional value every day to our customers with comprehensive services and products including network strategy, distribution center operational design and implementation, material handling automated equipment, robotics and a comprehensive suite of lifecycle services. At FORTNA, we believe in fostering a workplace that isn't just a job but a movement - a collective effort to redefine success and transform challenges into opportunities. "Join the Movement" encapsulates our commitment to a workplace culture that thrives on collaboration, celebrates diversity, and empowers every individual to contribute to something greater than themselves. Our Team. Our Passion. Our Approach. The Quality Inspector will be responsible for inspection of cut, formed, weld fabricated, machined or assemblies for adherence to engineering drawings. ESSENTIAL FUNCTIONS: Interpretation and understanding of shop drawings to determine if a part is made to print. Examples are: Weld symbols Geometric dimensioning and tolerancing symbols Print legend and notation The ability to use measuring instruments to verify whether a product is conforming to shop drawings. Examples include Micrometer, Caliper, Jo blocks, Pin gage, Tape measure, Dial indicator Manual Dexterity and ability to lift to 30 lbs. Must be able to distinguish color in this position and the ability to read small print and distinguish fine details. Reading skills to understand instructions, plans, or purchase orders. Good communication skills enabling verbal and written communication using active listening and learning. Tasks include but are not limited to: Process Production reject tags, issuing a Quality Hold. File Maker system for accurate product disposition with basic computer skills. Issue Quality Hold for all nonconforming material. Help investigate out of process activities and assist with containment of nonconforming material. Review process check sheets for completeness. Data collection with part verification inspection Audit defined processes for adherence to the process. QUALIFICATIONS High school diploma (or GED). Prior manufacturing experience, with some aspect of Quality inspection (preferred). Prior experience in metal fabrication a plus or welding/layout experience (preferred). Basic blueprint reading skills and welding symbols. The ability to use basic computer programs such as Word, Excel, PowerPoint, and Outlook. (preferred) Must have ability to use appropriate tools related to the task. This describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. 1st shift - This position offers a base hourly rate of $21.00. This job description describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Employees may be required to perform any other job-related duties as requested by their supervisor. It is the policy of FORTNA and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, FORTNA will provide reasonable accommodations for qualified individuals with disabilities.

We are a manufacturer of structural parts for the leading original equipment manufacturers (OEM's) in the large business and regional jet markets. Our experience and capabilities span multiple segments of an aircraft, including the engine pylon, struts, wing box, wings, wheel well, and the interior. Our success is based on utilizing proprietary manufacturing techniques to manufacture high quality complex parts through cost effective production. Given its breadth of capabilities and strong customer relationships, we have substantial content on the aviation industry's most popular aircraft. Job Description What does the job involve? The QA Inspector inspects machined components, sheet metal components, purchased products and standards, raw materials, assembled products and outside processing for conformance to engineering drawings and specifications. What will my responsibilities include? Reads and interprets aerospace manufacturing drawings, including tolerances, customer specifications and technical requirements. Accurately compares product to engineering drawings/specifications, purchase order, and manufacturing orders using common manual inspection equipment, (e.g., PCM's, height gage, dial indicators, calipers, micrometers, protractors, profilometers, bore gauges etc) to accept or reject product to customer engineering requirements. Documents product acceptance/rejection on manufacturing order, processes any necessary rejection documentation, and performs various MRP system functions. Performs Rockwell and Eddy Current testing for product acceptance. Understands and applies statistical sampling techniques. Reviews outside processing certifications of nondestructive testing, chemical processing, and finish, and verifies physical appearance of final product for conformance to engineering specifications. Fully capable of understanding, performing, and completing FAI's in accordance with Company and AS9102 requirements. Follows all safety guidelines established by the Company, including proper use of safety equipment and relevant safety procedures. Performs other duties as assigned. What key skills and experience do I need? Attention to detail: Recognizes and identifies deviations from requirements. Communication: Effectively communicates verbally and in writing; accurately records inspection results, including descriptions of rejected product. Customer focus: Anticipates internal and external customer needs, gives high priority to customer satisfaction and service. Provides information and results accurately, courteously, in a timely manner. Organization: Keeps working area neat and organized. Arrives on time to work and works to meet deadlines efficiently. Records time using a computerized data entry system; completes job assignments within allotted times. Teamwork: Collaborates and cooperates with Manufacturing, Engineering, and other inspectors to resolve issues. Knows when to ask for information and assistance, and assesses the long-term impact of decisions. Demonstrates a willing, positive, and proactive attitude. Follows verbal and written instructions; works independently with a minimum of supervision. Company policy awareness: Understands and complies with company policies and guidelines as described in the Employee Handbook, the Employee Safety Manual and the Quality Management System. Complies with rules and procedures of a drug-free workplace. Qualifications Preferred: A minimum of three years hands-on inspection experience in a regulated industry. Two years (recent) hands-on inspection experience in the aerospace industry. Passing score on Advanced Level Engineering Drawings Test. Passing score on Fluent Level Test on GD&T (Geometric Dimensioning and Tolerancing). High school diploma or equivalent. Trade school or college courses in related fields (e.g., blueprint reading, GD&T) Additional Information Why join Senior Aerospace AMT/Damar? We are committed to continuous sustainable growth through superior customer satisfaction. We are dedicated to operating in an ethical, safe, and environmentally responsible manner while providing a rewarding work environment for our employees. Our mission is supported by a culture of teamwork, continuous improvement, and strategic technology investments. Salary Offering: $24.00 per hour to $30.00 per hour Shifts available: Monday - Friday 6:00am - 2:30pm or Monday - Friday 2:30pm - 11:00pm (shift differential available) Benefit Offerings Senior Aerospace AMT/Damar offers eligible employees (and eligible family members): Medical, Dental, Vision Health Savings Account Supplemental Benefits Basic Life Insurance Voluntary Employee, Spouse or Child Life Insurance, Long-term Disability Insurance Employee Assistance Program Shift Premiums for Weekend Shifts - work 33 hours, paid for 40 (weekend night shift) or work 36 hours, paid for 40 (weekend day shift) Shift Differentials - $4.00 per hour (weekday night shift), $2.00 per hour (weekend day shift), $4.00 per hour (weekend night shift) Eligible employees are also offered 401k, PTO, 80 hours of paid holiday per calendar year, and other compensation (as applicable). Senior Aerospace AMT/Damar is an equal opportunity employer. Trade Compliance Statement Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions ), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data. To ensure there is no unexpected delay to your start date with our Company and due to the potential need to obtain an export license, we would like to promptly assess whether such a license is needed to access our facility and/or systems. Such licenses can take several weeks/months to obtain from the U.S. Government. Our Trade Compliance department may reach out to you with a Licensing Assessment form, which we request you kindly complete and return as soon as possible. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EOE M/F/D/V/VEVRAA Federal Contractor

Performs inspections and audits on aircraft interior components, materials, and processes to ensure compliance with engineering specifications, FAA regulations, and company quality standards. Utilizes precision measuring instruments and quality assurance methodologies to identify defects and ensure traceability. Essential Duties & Responsibilities Inspects incoming products to verify proper documentation and conformance to purchase orders and engineering specifications. Inspects aircraft wiring assemblies to ensure compliance with design specifications and regulatory standards. Performs receiving inspections and generates formal inspection reports. Completes FAA and customer-required certification documents. Creates and maintains First Article Inspection (FAI) reports in accordance with AS9102 or equivalent. Verify inclusion of all material and process certificates for traceability. Coordinates with stakeholders as required to accurately describe nonconforming conditions for rejected parts. Works closely with FAA DAR. Assists as required with part marking and packaging. Keeps management informed of inspection findings, quality issues, and corrective action progress. Maintains a neat, organized work area and helps with the general daily housekeeping of the department. Meets target hours and completes schedules as set by Supervision. Maintains regular attendance including being at work, being on time to work and working full shifts. Other duties as assigned. Job Competencies Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation. Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, and keeps others informed and uses appropriate communication methods. Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance. Initiative - Sets and achieves challenging goals, demonstrates persistence, and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals. Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests. Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality. Safety -Observes safety and security procedures, determines appropriate action beyond guidelines, uses equipment and materials properly, and reports potentially unsafe conditions. Summary of Education, Experience & Certification Minimum of high school diploma or equivalent with demonstrated skills required. Minimum of three years' experience in aircraft interior inspection or related aerospace quality role. This safety-sensitive position is covered by the Department of Transportation's (DOT) Drug and Alcohol Testing Program. Any applicant selected for this position will be subject to pre-employment drug testing. Persons occupying a "safety-sensitive” position will be subject to random drug and/or alcohol testing. Post-accident, reasonable cause, and return-to-duty tests may also be required based on specific circumstances. US Person Required - this position requires special access. A US Person is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes. Required Knowledge, Skills & Abilities Ability to lead personnel and have strong interpersonal skills. Ability to communicate effectively with all levels within the department. Working knowledge of various measuring devices such as calipers, micrometers, depth gauges, etc. Familiar with Quality and inspection concepts and processes. Ability to read blueprints, pack slips, invoices, and other customer supplied data. Ability to read measuring instruments. Familiar with engineering programs. Capability to determine sample size for lots. Mathematical knowledge and ability to apply towards problem solving. Strong time-management and problem-solving skills. Ability to coordinate and handle multiple priorities within deadlines and take initiative to produce results with minimal supervision. Ability to communicate in English (read, write, and verbally). Familiarity with AS9100 preferred. Ability to travel as required. Ability to work outside of core business hours as required. Physical Requirements Ability to climb and work on step stools and/or ladders. Ability to lift up to 25 pounds independently; up to 100 pounds with assistance. Ability to reach overhead. Ability to work in a non-dust-free environment. Ability to pass Jaeger J-1 in at least one eye, natural or corrected (20/25 vision) for near vision acuity and shall be capable of adequately distinguishing and differentiating colors used in the process involved. Full range of motion with both hands. Ability to work in a stooping, kneeling or standing position and in cramped areas. The expected WA salary range for this position is between $51,000.00 - $63,450.00. Actual compensation will be determined based on experience, education, location, and other factors permitted by law. Our suite of comprehensive benefits include: healthcare (medical, dental & vision), life insurance, paid time off, and a 401(k) savings plan with company match. About Greenpoint Technologies Greenpoint delivers nose-to-tail VIP Jet aircraft interiors for private clients and Heads-of-State. We are proud to be known in the aerospace industry for our design and engineering innovation, award-winning company culture, and on-time delivery of our beautiful products. We use leading-edge tools and employee-built processes to deliver extraordinary, one-of-a-kind custom aircraft interiors. It's complex work, but we work smart. In return for hard work, collaboration, and creativity, our people experience a culture custom built for high achievers: Big jobs and stretch assignments. High accountability environment, with transparent decisions aligned to values, open communication, and engaged leadership. Ability to make a big, visible impact on the end product. We welcome diverse contributions and provide equal employment opportunities to all individuals without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Mountain Ltd. has an opening for an OSP Construction Inspector in the Marysville, WA are a. Since 1979, Mountain Ltd. has successfully created and supported turnkey engineering solutions for traditional and wireless telecom providers across the United States. We are a national leader in the industry, providing high-quality engineering, on-time service delivery, and skilled personnel paired with innovative technology and creative solutions. Specialties include OSP/ISP engineering, design, permitting, right-of-way, and CAD for traditional and wireless telecommunications companies. Job Description The OSP Inspector II will be responsible to ensure that all the client's underground, buried and aerial plant facilities meet the current standards through inspections, and corrections work performed by contractors. The Inspector will document all inspections, audits, and pole transfers electronically, and be expected to communicate via email, and cellular phone. At times it may be necessary to perform inspections, audits, and transfers manually by the use of printed spreadsheets. Familiarity in using mapping/GPS technology. Qualifications: + Previous experience performing NESC inspections or experience working on an aerial cable line crew + Previous experience performing wooden pole ground line inspections. + Must be proficient in OSP Construction Standards + Familiarity with the National Electric Safety Code. + Computer experience: + Microsoft Windows XP, Excel 2003 or newer and Outlook + Experience with mapping tools such as Microsoft MapPoint 2009 or newer is preferred, but not required. + Familiar and comfortable with internet usage, and web page browsing. + Good communication skills. + Personal time management and organization skills. + Construction contractor management skills. + A valid driver's license and the ability to travel on short notice. Pay $32/hr DOE Thank you for your interest in Mountain Ltd. For more career opportunities, please visit us at ******************* #M4 System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Are you in search of a flexible work schedule? Are you interested in earning additional income with potential for growth? Do you prefer working outdoors rather than confined to an office or warehouse? requires travel from location to location. Quiktrak is looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories or property condition assessments. When you partner with Quiktrak, you are collaborating with experienced professionals dedicated to delivering exceptional customer experiences since 1991. Over the years, we have expanded our business to become one of the industry's largest players, offering floorplan audits, data collection, inspection services, and business growth opportunities for our contractors. For more information, please visit our website: Inspecting the world one asset at a time. | Quiktrak, LLC Our most successful Inspectors share common traits such as resourcefulness, discipline, a strong work ethic, meticulous and the ability to persevere through challenges. If this description resonates with you, we encourage you to apply today. Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfortable working outdoors in various weather conditions Access to a recent smartphone or tablet to execute jobs while on site. Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Capability to stand and walk continuously for up to seven and a half hours Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours. License/Certification: Driver's License (Required) "United States Applicants Only"

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Job Description Hiring Bonus: $1000 after successful completion of 120 days and an acceptable attendance record ABW has an immediate opening for a Certified Welding Inspector (CWI) who is motivated and will take pride in producing quality fabricated parts and meeting or exceeding customer requirements and schedules. The tasks to perform this job successfully may include the following. Other tasks may be assigned. Performs inspections and tests per QC Manual, QA Manual, procedures, instructions, drawings, and travelers at specified stages in production process Inspects and/or tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality of products or materials Records inspection and test data Evaluates inspection and/or test data and writes reports to validate or indicate deviations from existing manuals, procedures, instructions, drawings, or travelers Recommends modifications of existing quality or production manuals, procedures, instructions, drawings, or travelers to achieve optimum quality within limits of equipment capability Sets up and performs nondestructive tests on materials, parts, or products to measure performance or material characteristics, as applicable Benefits include health, dental, vision and voluntary benefits. 2 weeks of PTO per year to start. Day shift: Work four 10-hour shifts, Monday through Thursday, 6 am-4:30 pm. Overtime as required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and depth perception. ABW is a leader in the Aerospace, Defense, Nuclear and Energy industries. Our diversity allows us to maintain a prominent level of fabrication production during any downturn or difficult time. If you are looking for a career that offers high pay and outstanding benefits, we have a job opportunity for you! ABW is an equal opportunity employer. Job Type: Full-time Day Shift & Swing Shift Expected hours: 40 per week Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance

The QC Inspector's main responsibility is to inspect, accept or reject work performed in a particular discipline in compliance with applicable Codes and specifications. Discipline can be civil, structural, mechanical or piping. This posting is to gather a qualified pool of candidates as the need arises to hire for various maintenance and turnaround projects. Once an opening occurs, we will reach out to qualified candidates. Essential Functions * Actively support the Company's commitment to safety and its "Core Values." * Represent the Company at all times with high moral standards while adhering to the Company's "Code of Business Conduct and Ethics." * Responsible to observe and follow all safety procedures and regulations at the job-site. * Perform inspections and witness tests as required. * Prepare reports and quality records in compliance with procedures. * Coordinate areas of QC work with other department's work, such as, start-up, engineering, process, etc. * Perform receipt inspections of material for work area in conjunction with material control staff as required. * Perform system verification on completed systems to assure correct installation per design specifications. * Control measuring and test equipment, as required to insure accuracy. * Perform additional assignments per supervisor's direction. Qualifications * 2+ year's minimum experience. * AWS CWI minimum required. * API 653 certification preferred. * Should be familiar with ASME Sec. VIII, Sec. IX, B31.1, B31.3, API ************* Codes * Strong understanding of corporate and industry practices, processes and standards and their impact on project activities. * Excellent oral and written communication skills; good computer skills including MS Word and Excel. Washington law requires pay information in job postings. The typical hiring range for this position in Washington is shown below. The pay rate will depend on the successful candidate's qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range. Hiring range: $45.62 to $52.13 per hour Full range for this position, available over time: $45.62 to $52.13 per hour In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets/Affirmative Action Employer We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.

FORTNA partners with the world's leading brands to transform omnichannel and parcel distribution operations. Known world-wide for enabling companies to keep pace with digital disruption and growth objectives, we design and deliver solutions, powered by intelligent software, to optimize fast, accurate and cost-effective order fulfillment and last mile delivery. Our people, innovative approach and proprietary algorithms and tools ensure optimal operations design and material and information flow. We deliver exceptional value every day to our customers with comprehensive services and products including network strategy, distribution center operational design and implementation, material handling automated equipment, robotics and a comprehensive suite of lifecycle services. At FORTNA, we believe in fostering a workplace that isn't just a job but a movement - a collective effort to redefine success and transform challenges into opportunities. "Join the Movement" encapsulates our commitment to a workplace culture that thrives on collaboration, celebrates diversity, and empowers every individual to contribute to something greater than themselves. Our Team. Our Passion. Our Approach. JOB SUMMARY: The Quality Inspector will be responsible for inspection of cut, formed, weld fabricated, machined or assemblies for adherence to engineering drawings. ESSENTIAL FUNCTIONS: 1. Interpretation and understanding of shop drawings to determine if a part is made to print. Examples are: o Weld symbols o Geometric dimensioning and tolerancing symbols o Print legend and notation 2. The ability to use measuring instruments to verify whether a product is conforming to shop drawings. Examples include Micrometer, Caliper, Jo blocks, Pin gage, Tape measure, Dial indicator 3. Manual Dexterity and ability to lift to 30 lbs. 4. Must be able to distinguish color in this position and the ability to read small print and distinguish fine details. 5. Reading skills to understand instructions, plans, or purchase orders. 6. Good communication skills enabling verbal and written communication using active listening and learning. 7. Tasks include but are not limited to: o Process Production reject tags, issuing a Quality Hold. o File Maker system for accurate product disposition with basic computer skills. o Issue Quality Hold for all nonconforming material. o Help investigate out of process activities and assist with containment of nonconforming material. o Review process check sheets for completeness. o Data collection with part verification inspection o Audit defined processes for adherence to the process. QUALIFICATIONS: 1. High school diploma (or GED). 2. Prior manufacturing experience, with some aspect of Quality inspection (preferred). 3. Prior experience in metal fabrication a plus or welding/layout experience (preferred). 4. Basic blueprint reading skills and welding symbols. 5. The ability to use basic computer programs such as Word, Excel, PowerPoint, and Outlook. (preferred) 6. Must have ability to use appropriate tools related to the task. This describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Starting pay will be $21.00 This job description describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Employees may be required to perform any other job-related duties as requested by their supervisor. It is the policy of FORTNA and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, FORTNA will provide reasonable accommodations for qualified individuals with disabilities.

Are you in search of a flexible work schedule? Are you interested in earning additional income with potential for growth? Do you prefer working outdoors rather than confined to an office or warehouse? requires travel from location to location. Quiktrak is looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories or property condition assessments. When you partner with Quiktrak, you are collaborating with experienced professionals dedicated to delivering exceptional customer experiences since 1991. Over the years, we have expanded our business to become one of the industry's largest players, offering floorplan audits, data collection, inspection services, and business growth opportunities for our contractors. For more information, please visit our website: Inspecting the world one asset at a time. | Quiktrak, LLC Our most successful Inspectors share common traits such as resourcefulness, discipline, a strong work ethic, meticulous and the ability to persevere through challenges. If this description resonates with you, we encourage you to apply today. Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfortable working outdoors in various weather conditions Access to a recent smartphone or tablet to execute jobs while on site. Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Capability to stand and walk continuously for up to seven and a half hours Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours. License/Certification: Driver's License (Required) "United States Applicants Only"

Hiring Bonus: $1000 after successful completion of 120 days and an acceptable attendance record ABW has an immediate opening for a Certified Welding Inspector (CWI) who is motivated and will take pride in producing quality fabricated parts and meeting or exceeding customer requirements and schedules. The tasks to perform this job successfully may include the following. Other tasks may be assigned. Performs inspections and tests per QC Manual, QA Manual, procedures, instructions, drawings, and travelers at specified stages in production process Inspects and/or tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality of products or materials Records inspection and test data Evaluates inspection and/or test data and writes reports to validate or indicate deviations from existing manuals, procedures, instructions, drawings, or travelers Recommends modifications of existing quality or production manuals, procedures, instructions, drawings, or travelers to achieve optimum quality within limits of equipment capability Sets up and performs nondestructive tests on materials, parts, or products to measure performance or material characteristics, as applicable Benefits include health, dental, vision and voluntary benefits. 2 weeks of PTO per year to start. Day shift: Work four 10-hour shifts, Monday through Thursday, 6 am-4:30 pm. Overtime as required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and depth perception. ABW is a leader in the Aerospace, Defense, Nuclear and Energy industries. Our diversity allows us to maintain a prominent level of fabrication production during any downturn or difficult time. If you are looking for a career that offers high pay and outstanding benefits, we have a job opportunity for you! ABW is an equal opportunity employer. Job Type: Full-time Day Shift & Swing Shift Expected hours: 40 per week Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance

Are you in search of a flexible work schedule? Are you interested in earning additional income with potential for growth? Do you prefer working outdoors rather than confined to an office or warehouse? requires travel from location to location. Quiktrak is looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories or property condition assessments. When you partner with Quiktrak, you are collaborating with experienced professionals dedicated to delivering exceptional customer experiences since 1991. Over the years, we have expanded our business to become one of the industry's largest players, offering floorplan audits, data collection, inspection services, and business growth opportunities for our contractors. For more information, please visit our website: Inspecting the world one asset at a time. | Quiktrak, LLC Our most successful Inspectors share common traits such as resourcefulness, discipline, a strong work ethic, meticulous and the ability to persevere through challenges. If this description resonates with you, we encourage you to apply today. Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfortable working outdoors in various weather conditions Access to a recent smartphone or tablet to execute jobs while on site. Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Capability to stand and walk continuously for up to seven and a half hours Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours. License/Certification: Driver's License (Required) "United States Applicants Only"