Inspector jobs in Billings, MT

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Advance Your Career in Insurance Claims with Allied Universal Compliance and Investigation Services. Allied Universal Compliance and Investigation Services is the premier destination for a career in insurance claim investigation. As a global leader, we provide dynamic opportunities for claim investigators, SIU investigators, and surveillance investigators. Our team is committed to innovation and excellence, making a significant impact in the insurance industry. If you're ready to grow with the best, explore a career with us and make a difference. Field Site Inspectors needed!!! JOB DESCRIPTION: Allied Universal Compliance and Investigations is seeking candidates to fill the role of the Field Site inspector. The Field Site inspector will perform site visit inspection services for Medicare and Medicaid providers/suppliers in accordance with established requirements. The Inspector works independently to visit assigned locations, take photographs, conduct interviews, collect data and document findings. Inspections must be completed using approved guidelines and standards. Multiple positions are available! Must possess a valid driver's license with at least one year of driving experience Pay Rate: $23-$28 / hr. RESPONSIBILITIES: Conduct independent investigations of assigned cases in a specific geographic area. Document and report observations, activities, and any relevant information in a clear and concise manner using mobile devices (tablets and cell phones) Maintain confidentiality and adhere to legal and ethical standards with the highest professional standards while conducting site inspections Efficient and timely workload management to meet assignment time completion. Review and verify credentials, including education, training, licensure, and certification, for healthcare providers and healthcare facilities as required. Ensure that healthcare providers meet all necessary qualifications and requirements as detailed on provider/supplier-specific site visit checklist forms. Collaborate with Desktop Inspectors and other PEO SVS operational staff for the execution and reporting of site visit inspection performance. Professional attire, demeanor, and Interaction during all contacts with provider/suppliers/facility administrative staff/representative throughout the entire site inspection process. QUALIFICATIONS (MUST HAVE): High school diploma or equivalent Proficient in utilizing laptop computers, mobile devices and tablets. Flexibility to work varied and irregular hours/days including weekends Successful completion of the Allied Universal Investigations' training/orientation course Successful completion of all required Site Inspector training, internal and CMS-required, both Initial and in-service training. PREFERRED QUALIFICATIONS (NICE TO HAVE): Associate degree or higher, preferably in Criminal Justice Prior insurance investigations and/or healthcare facility on-site inspections/compliance. Knowledge of Regulations: Familiarity with industry regulations, such as those from the National Committee for Quality Assurance (NCQA) and The Joint Commission (TJC), Medicare Provider Enrollment, or other healthcare profession or facility credentialing, is highly preferred. Effective public speaking and communication skills. BENEFITS: (full-time employees) Medical, dental, vision, basic life, AD&D, and disability insurance Enrollment in our company's 401(k)plan, subject to eligibility requirements Seven paid holidays annually, sick days available where required by law Vacation time offered at an initial accrual rate of 3.08 hours biweekly for full time positions. Unused vacation is only paid out where required by law. Closing Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: *********** If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: ***********/offices. Requisition ID 2025-1480608

Advance Your Career in Insurance Claims with Allied Universal Compliance and Investigation Services. Allied Universal Compliance and Investigation Services is the premier destination for a career in insurance claim investigation. As a global leader, we provide dynamic opportunities for claim investigators, SIU investigators, and surveillance investigators. Our team is committed to innovation and excellence, making a significant impact in the insurance industry. If you're ready to grow with the best, explore a career with us and make a difference. Field Site Inspectors needed!!! JOB DESCRIPTION: Allied Universal Compliance and Investigations is seeking candidates to fill the role of the Field Site inspector. The Field Site inspector will perform site visit inspection services for Medicare and Medicaid providers/suppliers in accordance with established requirements. The Inspector works independently to visit assigned locations, take photographs, conduct interviews, collect data and document findings. Inspections must be completed using approved guidelines and standards. Multiple positions are available! Must possess a valid driver's license with at least one year of driving experience Pay Rate: $23-$28 / hr. RESPONSIBILITIES: Conduct independent investigations of assigned cases in a specific geographic area. Document and report observations, activities, and any relevant information in a clear and concise manner using mobile devices (tablets and cell phones) Maintain confidentiality and adhere to legal and ethical standards with the highest professional standards while conducting site inspections Efficient and timely workload management to meet assignment time completion. Review and verify credentials, including education, training, licensure, and certification, for healthcare providers and healthcare facilities as required. Ensure that healthcare providers meet all necessary qualifications and requirements as detailed on provider/supplier-specific site visit checklist forms. Collaborate with Desktop Inspectors and other PEO SVS operational staff for the execution and reporting of site visit inspection performance. Professional attire, demeanor, and Interaction during all contacts with provider/suppliers/facility administrative staff/representative throughout the entire site inspection process. QUALIFICATIONS (MUST HAVE): High school diploma or equivalent Proficient in utilizing laptop computers, mobile devices and tablets. Flexibility to work varied and irregular hours/days including weekends Successful completion of the Allied Universal Investigations' training/orientation course Successful completion of all required Site Inspector training, internal and CMS-required, both Initial and in-service training. PREFERRED QUALIFICATIONS (NICE TO HAVE): Associate degree or higher, preferably in Criminal Justice Prior insurance investigations and/or healthcare facility on-site inspections/compliance. Knowledge of Regulations: Familiarity with industry regulations, such as those from the National Committee for Quality Assurance (NCQA) and The Joint Commission (TJC), Medicare Provider Enrollment, or other healthcare profession or facility credentialing, is highly preferred. Effective public speaking and communication skills. BENEFITS: (full-time employees) Medical, dental, vision, basic life, AD&D, and disability insurance Enrollment in our company's 401(k)plan, subject to eligibility requirements Seven paid holidays annually, sick days available where required by law Vacation time offered at an initial accrual rate of 3.08 hours biweekly for full time positions. Unused vacation is only paid out where required by law. Closing Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: *********** If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: ***********/offices. Requisition ID 2025-1480608

Overview Advance Your Career in Insurance Claims with Allied Universal Compliance and Investigation Services. Allied Universal Compliance and Investigation Services is the premier destination for a career in insurance claim investigation. As a global leader, we provide dynamic opportunities for claim investigators, SIU investigators, and surveillance investigators. Our team is committed to innovation and excellence, making a significant impact in the insurance industry. If you're ready to grow with the best, explore a career with us and make a difference. Field Site Inspectors needed!!! JOB DESCRIPTION: Allied Universal Compliance and Investigations is seeking candidates to fill the role of the Field Site inspector. The Field Site inspector will perform site visit inspection services for Medicare and Medicaid providers/suppliers in accordance with established requirements. The Inspector works independently to visit assigned locations, take photographs, conduct interviews, collect data and document findings. Inspections must be completed using approved guidelines and standards. Multiple positions are available! Must possess a valid driver's license with at least one year of driving experience Pay Rate: $23-$28 / hr. RESPONSIBILITIES: Conduct independent investigations of assigned cases in a specific geographic area. Document and report observations, activities, and any relevant information in a clear and concise manner using mobile devices (tablets and cell phones) Maintain confidentiality and adhere to legal and ethical standards with the highest professional standards while conducting site inspections Efficient and timely workload management to meet assignment time completion. Review and verify credentials, including education, training, licensure, and certification, for healthcare providers and healthcare facilities as required. Ensure that healthcare providers meet all necessary qualifications and requirements as detailed on provider/supplier-specific site visit checklist forms. Collaborate with Desktop Inspectors and other PEO SVS operational staff for the execution and reporting of site visit inspection performance. Professional attire, demeanor, and Interaction during all contacts with provider/suppliers/facility administrative staff/representative throughout the entire site inspection process. QUALIFICATIONS (MUST HAVE): High school diploma or equivalent Proficient in utilizing laptop computers, mobile devices and tablets. Flexibility to work varied and irregular hours/days including weekends Successful completion of the Allied Universal Investigations' training/orientation course Successful completion of all required Site Inspector training, internal and CMS-required, both Initial and in-service training. PREFERRED QUALIFICATIONS (NICE TO HAVE): Associate degree or higher, preferably in Criminal Justice Prior insurance investigations and/or healthcare facility on-site inspections/compliance. Knowledge of Regulations: Familiarity with industry regulations, such as those from the National Committee for Quality Assurance (NCQA) and The Joint Commission (TJC), Medicare Provider Enrollment, or other healthcare profession or facility credentialing, is highly preferred. Effective public speaking and communication skills. BENEFITS: (full-time employees) Medical, dental, vision, basic life, AD&D, and disability insurance Enrollment in our company's 401(k)plan, subject to eligibility requirements Seven paid holidays annually, sick days available where required by law Vacation time offered at an initial accrual rate of 3.08 hours biweekly for full time positions. Unused vacation is only paid out where required by law. Closing Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: *********** If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: ***********/offices. Requisition ID 2025-1480608

QA Inspector ***Work Location: Grand Forks, ND ( Grand Forks AFB)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Observes and investigates construction phases for compliance with schedules, specifications, and shop drawings. Identifies problems, recommends changes, and assesses the need for contract modifications. Performs inspections and completes daily site reports in RMS. Include comments and monitoring of progress, work activities, safety issues and subcontractor manpower in the reports. Assists in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and assists with preparation of contract modification documentation. Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Participates and executes RFI and Submittal reviews, including coordination with the designers, RE, and technical experts and executes responses to the contractor. Logs and maintains data as necessary to assist with project management and decision making. Performs other duties as assigned Education/Experience: High School Diploma/GED minimum; Construction related degree, preferred Minimum of 5 years of applicable experience on construction projects large complex multimillion dollar federal projects, Department of Defense or USACE preferred Experience using RMS 3.0, preferred Experience with three-phase inspection process Experience with OSHA and EM 385-1-1 USACE Safety Manual, preferred Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Mountain Ltd. has an opening for an OSP Inspector working in the Billings, MT area! Since 1979, Mountain Ltd. has successfully created and supported turnkey engineering solutions for traditional and wireless telecom providers across the United States. We are a national leader in the industry, providing high-quality engineering, on-time service delivery, and skilled personnel paired with innovative technology and creative solutions. Specialties include OSP/ISP engineering, design, permitting, right-of-way and CAD for traditional and wireless telecommunications companies. Overview: + Monitor construction crews for compliance with client and jurisdictional requirements and specifications, including but not limited to cable/duct depth, separation and clearance requirements, labeling, grounding, node site construction, etc. Track and monitor any exceptions in depth. All data shall be recorded in client systems + Ensure job site(s) is clean and secure at the end of each day + Document and monitor quality instances that require remediation through full remediation. All data shall be recorded in CLIENT systems. + Manage remediation work resulting from customer complaints. All data shall be recorded in client systems + Document initial utility strike and report to client OSPC resource for proper distribution of notification, determine type and cause per client utility strike process and update status through final remediation of strike. All data shall be recorded in client systems. + Confirm and update HSR (hard surface restoration) type once captured by OSP construction contractor. If HSR is identified as pass through provide to client OSP resource for approval. All data shall be recorded in client systems. + Ensure that each SSR (Soft Surface Remediation) instance that cannot be fully remediated in 14 days window is captured and monitored to be fully repaired. All data shall be recorded in client systems + Document and understand change to construction that will result in design change and relay to OSPC for approval + Confirm and update cost adder change request once captured by OSP construction contractor. Send cost adder change request to client OSPC resource for approval. All data shall be recorded in client systems. Qualifications: + Underground telecom experience is a requirement. + Previous experience performing NESC inspections or experience working on an aerial cable line crew + Previous experience performing wooden pole ground line inspections. + Must be proficient in OSP Construction Standards + Familiarity with the National Electric Safety Code. + Computer experience: + Microsoft Windows XP, Excel 2003 or newer and Outlook + Experience with mapping tools such as Microsoft MapPoint 2009 or newer is preferred, but not required. + Familiar and comfortable with internet usage, and web page browsing. + Good communication skills. + Personal time management and organization skills. + Construction contractor management skills. + A valid driver's license and the ability to travel on short notice. Thank you for your interest in Mountain Ltd. For more career opportunities, please visit us at ******************* #M4 System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Job Details Billings, MTDescription API 510, 570, 653 Inspector At the direction of the client, perform visual and non-destructive examinations of static and dynamic pressure retaining equipment in accordance with American Petroleum Institute (API) standard 570 and the American Society of Mechanical Engineers (ASME). Submit to client technically accurate reports documenting equipment condition. Provide client with technical recommendations for the repair, re-rate, replacement, and/or alteration of plant equipment, as required for safe operation within stated operating parameters for durations specified by client. Provide technical input to client as required for welding and metallurgical issues. Provide technical guidance, on an application of non-destructive examination techniques and procedures. Fully comply with all Xcel NDT and client safe work practices and actively participate in all site safety initiatives. Qualifications One of more API Certifications - API 510/570/653 Physical Demands and Work Conditions * Standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling, fingering, feeling, talking, hearing, visual acuity, accommodation and color vision * Moving, carrying, lifting, objects in excess of 50 lbs * Climbing and working off of ladders, stairs, and scaffolding in excess of 100 ft * Working extended hours and standing for extended periods of time * Work in indoor and outdoor environments in conditions of extreme heat and cold * Work in and near industrial hazards.

Kleinfelder has been connecting great people to the best work since 1961. We are a responsive team of engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. Our ecosystem mindset facilitates collaboration, harnessing the collective ingenuity of Kleinfelder and our partners, to deliver the right solutions to our clients, every day, on every project. Take Your Construction Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Construction Services team is looking for you! From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 35 accredited laboratories. Kleinfelder is seeking a qualified, responsible candidate for the position of Special Inspector to perform inspection duties on a large scale/multi year project in the vicinity of the Cheyenne, WY area. We need inspectors and technicians who are comfortable being actively engaged on construction sites performing special inspections and testing of construction materials in the field. This role offers a dynamic work environment, the opportunity to work on a high-profile project, and be part of an industry leading company. At Kleinfelder, we provide opportunities for each person to use their expertise and talents, grow professionally, and make an impact each and every day. We know our employees' commitment, pride, and passion contributes to the success of the company and to the successes of our clients. Hard work should reap rewards and build for the future-yours and ours. In addition to the opportunity to work on some of the largest and most interesting projects in the area, Kleinfelder also offers: Competitive Wages; Benefits, including medical, dental, vision, & life insurance; HSA & FSA; 401K; paid holidays; and paid time off (PTO); Certification training and professional development (ICC, ACI, AWS, etc.); Employee referral bonuses; Career advancement opportunities with one of the largest and most respected firms in the industry. If you are looking for a CAREER opportunity, to development your professional skills, enhance your technical certifications, and work on resume building projects; then we want to talk to you! Kleinfelder recognizes our staff as the key to our success. Our employees are the backbone of an integrated company that provides innovative, dependable, and sustainable solutions for our clients. Accordingly, we partner with our staff to establish and achieve career development goals designed to build your professional experience and technical confidence by helping you obtain additional inspection and testing certifications. The ideal candidate for this role of Special Inspector I should have the following certifications or experience (or able to obtain within the first three months): A minimum of 2 years' experience in the construction industry as a technician or inspector Radiation Safety training for the operation of a nuclear density gauge with soil density testing experience. ICC Soils Special Inspector or NICET Level II - Construction Materials Testing Soils. ACI Concrete Field Testing Technician - Grade 1. Valid driver's license and clean driving record. Use a company provided laptop or tablet computer and a working knowledge of MS Office programs (e.g., Word, Excel, Outlook, etc.). High school diploma or equivalent. A good work ethic and high level of personal integrity. Ability to monitor contractors and report results verbally and in writing. Proficiency in preparing clear and accurate detailed reports of testing and inspection activities and maintaining work activity records. Attention to detail, quality, and safety. Authorization to work in the United States. The ideal candidate for this role of Special Inspector II should meet all the criteria of the Special Inspector I plus: 5+ years of special inspection and/or construction materials testing experience. At least three ICC Special Inspection Certifications The ideal candidate for this role of Special Inspector III should meet all the criteria of the Special Inspector II plus: 8+ years of special inspection and/or construction materials testing experience. At least five ICC Special Inspection Certifications The ideal candidate for this role of Special Inspector IV should meet all the criteria of the Special Inspector III plus: 10+ years of special inspection and/or construction materials testing experience. At least six ICC Special Inspection Certifications In addition to the above required certifications, hiring preference will be given to those with any of the following desired certifications: ICC Special Inspector Certifications (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Structural Steel and Bolting, Structural Welding). IFC Special Inspector Premier Certificate. American Welding Society (AWS) Certified Welding Inspector (CWI). SC DLLR Special Inspector Registration. This position requires the ability to: Bend, stoop, and lift up to 50 pounds (22.68 kg) repetitively and over 50 pounds (22.68 kg) using handling equipment (hand truck, etc.). Operate equipment as necessary (i.e., ultrasonic nondestructive testing machine, concrete cylinder press, etc.). Maintain safe mobility over construction obstacles by foot and ladder, traversing over rough broken ground and steep surfaces. Work outside in variable weather at field sites and in labs with various levels of safety protection required. Responsibilities include but are not limited to: Perform field observations and materials sampling/testing during construction of buildings, bridges, and roadways. Perform testing on construction materials including, soils, reinforcing steel, concrete, masonry, structural steel, fireproofing, metal decking, and paving. Write daily field reports documenting work performed by the various contractors and indicating compliance/non-compliance with contract documents. Cast field samples of concrete, masonry, grout, etc. for strength verification. Provide daily phone calls to Department Manager to inform of daily progress of the project. Pick-up construction material samples and deliver to laboratory, deliver equipment to site technicians. Implementation of the Client's Project Management Plan, KLF's Quality Management Plan, contract documents, and the local jurisdiction's requirements. Contribute to building a high-performing team by mentoring and supporting the Owner's team within the scope of work's space. Support the Owner's quality team by consulting the project's team leading effective cross-functional communication. Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. Final agreed upon compensation is based upon individual qualifications and experience (as detailed above). Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder.

Requirements Serve as a construction inspector for transportation projects by overseeing construction of roads, highways and bridges to assure quality and safety in the construction of these facilities. Review, inspect, test and/or measure the work of the contractors and consultants to ensure that work is performed in accordance with contract requirements. Recommend to the project engineer approval and payment for acceptable and completed work, or rejection of non-conforming work. Maintain accurate daily record of construction site activities and produce required reports on progress, safety, quality, schedule and budget status. Recommend project-related decisions based on assessment of construction performance and progress relative to contract requirements. Analyze construction schedules utilizing standard scheduling software such as Microsoft Project, Primavera, or equivalent. Prepare documentation in support of contract change orders or modifications when requested by the project engineer. Initiate communication of project-related details and concerns to the project engineer in a timely manner. Calculate and estimate all quantities and costs of materials that will be required for individual phases or elements of the project. Adhere to the requirements of RockSol's internal Quality Management System (QMS). Maintain assigned equipment and vehicles according to company procedures. Other construction inspection assignments as needed. Minimum Qualifications High school diploma or equivalent required. Minimum 3 years of relevant experience. Must possess a demonstrated ability to prioritize work, meet deadlines and maintain attention to accuracy and detail. Must possess competent verbal and written communication skills. Obtain and maintain required certifications for position. Must meet internal requirements for operation of company vehicles throughout duration of employment and must maintain a valid driver's license and insurable driving record. Must be willing and able to travel to job sites, sometimes for extended periods. Job sites may be located throughout Colorado or in western U.S. Working knowledge of safety and labor laws and requirements, quality control and quality assurance principles. Preferred Qualifications Previous project management and/or inspection experience on DOT or FHWA road construction projects. Current Professional Engineer license. Construction materials testing experience. Work Environment Work locations include road construction sites and field offices with regular exposure to all types of weather conditions during field work. Willingness to work extended hours, nights, and weekends if necessary to comply with client requirements and/or to meet project deadlines. Loud noise levels at times (hearing protection provided). Must be able to routinely lift and/or move up to 50 pounds. Overnight travel may be required with this position. Pay (based on education and experience) Construction Inspector I $25 to $35 per hour Construction Inspector II $30 to $40 per hour Construction Inspector III $35 to $45 per hour Construction Inspector IV $40 to $50 per hour Benefits RockSol offers a comprehensive benefits package to full-time employees including: Medical, dental, and vision insurance, Life, AD&D, Long and short term disability plans, 401K, PTO and paid holidays. Equal Opportunity Employer: Minorities/Female/Veteran/Disabled/Sexual Orientation/Gender Identity RockSol is committed to maintaining a drug-free workplace. All candidates are required to pass a drug and alcohol test before beginning employment and are subject to random testing throughout the duration of their employment.

*THIS IS NOT A FULL TIME ROLE || THIS IS A 1099 CONTRACTOR OPPORTUNITY FOR WYOMING* Responsibilities: Conduct inspections and quality assessments of welding activities in accordance with project specifications and industry standards. Verify welding procedures, materials, and equipment used for compliance with approved specifications and regulatory requirements Monitor and evaluate welder qualifications and performance to maintain consistent quality in welding operations Conduct visual, dimensional, and non-destructive testing (NDT) as required to assess weld quality and integrity. Prepare detailed inspection reports documenting weld quality, non-conformances, and corrective actions taken. Participate in weld procedure qualification and welding performance qualification tests as part of project quality assurance. Technical Qualifications and Certifications: 5 years' experience as a Welding Inspector Certifications needed are API, AWS, CWI, NDT Welding Inspector (Oil and Gas) - Conduct inspections and quality assessments of welding activities in accordance with project specifications and industry standards such as ASME, API, Aramco, and AWS to ensure adherence to quality and safety protocols. Industry Experience: 5 years of experience in welding inspection within the oil and gas industry, with a strong understanding of welding processes and procedures. Proficiency in interpreting welding symbols, blueprints, and technical drawings Thorough knowledge of welding codes and standards Strong attention to detail and analytical skills for accurate inspection and assessment of weld quality Contract Type: 1099 contract (Part Time) Shift Hours: Flexible, dependent on the project. May include full-day shifts or partial-day inspections based on project needs. Work Location: Casper, WY. Compensation: $25.00 - $35.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

Full-time Description ALLWEST is a 100% employee-owned geotechnical engineering, environmental consulting, construction materials testing, and special inspections firm serving the Inland Northwest and beyond. We have offices located in Hayden, Lewiston and Meridian, Idaho; Missoula, Montana; and Spokane and Tri-Cities, Washington. We are seeking an experienced Certified Construction Materials Special Inspector to join our growing Missoula, Montana team. If you have a desire to work with a dynamic team, grow your career and have a high level of personal accountability, we want to talk with you! General Responsibilities The Special Inspector is responsible for monitoring materials, installation, fabrication, erection, and placement of construction components to evaluate compliance with plans and specifications. Also will provide accurate preparation of electronic daily field reports that summarize services provided and calculation of test results. Requirements ICC and/or ACI Certifications: ICC Reinforced Concrete ACI Certified Field Testing Technician Grade I or higher Nuclear Gauge Safety Training Preferred Certifications: ICC Pre-Stressed Concrete ICC Structural Steel and Bolting ICC Structural Welding ICC Spray-applied and Intumescent Fireproofing Additional Requirements 5+ years of construction materials inspection experience Positive attitude with a customer service approach Effective verbal and written communications skills Strong attention to detail Excellent time management skills Valid driver's license and an acceptable driving record Ability to drive throughout our northern Idaho service region Comfortable using computers and mobile devices such as a tablet to record field data Ability to lift and carry up to 50 lbs. and maneuver up to 75 lbs. with assistance ALLWEST Benefits We are proud to be a 100% employee-owned company, which means that strong company performance is rewarded to all members of our team. Eligible full-time employees have access to the following benefits: Company paid medical, dental and vision. Short and long-term disability, life, accident, FSA, and HSA options. Paid time off and paid holidays. 401(k) plan with up to 4% company match. ALLWEST Employee Stock Ownership Plan (ESOP). We are an Equal Opportunity Employer. Salary Description $30-$38 PER HOUR

Are you in search of a flexible work schedule? Are you interested in earning additional income with potential for growth? Do you prefer working outdoors rather than confined to an office or warehouse? requires travel from location to location. Quiktrak is looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories or property condition assessments. When you partner with Quiktrak, you are collaborating with experienced professionals dedicated to delivering exceptional customer experiences since 1991. Over the years, we have expanded our business to become one of the industry's largest players, offering floorplan audits, data collection, inspection services, and business growth opportunities for our contractors. For more information, please visit our website: Inspecting the world one asset at a time. | Quiktrak, LLC Our most successful Inspectors share common traits such as resourcefulness, discipline, a strong work ethic, meticulous and the ability to persevere through challenges. If this description resonates with you, we encourage you to apply today. Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfortable working outdoors in various weather conditions Access to a recent smartphone or tablet to execute jobs while on site. Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Capability to stand and walk continuously for up to seven and a half hours Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours. License/Certification: Driver's License (Required) "United States Applicants Only"

At LSCG, we take a people-first approach to construction. We know communications infrastructure construction isn't just about fiber and towers. It's about collaboration and honesty. At LSCG, a Full Circle Fiber Partners company, we bring more than steel toes and hard hats to the job site - we bring teamwork and integrity, and we do everything with a mindset of safety. Just as a well-placed network connects a community, a well-organized team powers all projects to success. Service excellence, pioneering experience, and a passion for what we do - that's LSCG. LSCG is a dynamic organization of diverse, customer-focused people committed to our Core Values: Service Excellence, Accountability, Safety, Integrity, Fairness and Mutual Respect. We are looking for motivated and professional individuals to grow with our team. LSCG offers competitive wages and a comprehensive benefit package that includes health, dental, matching 401K and more. Job Summary Verify all company technical specifications for construction are followed for inspected jobs. Perform field inspector duties by reviewing work completed by contract & in-house technicians. Major Duties and Responsibilities Actively and consistently supports all efforts to ensure LSCG follows all field construction specifications and guidelines as outlined by each project. Perform field inspections (includes compliance with requirements outlined in applicable regulations such as OSHA & FCC & following procedures as outlined in the Field Inspector Guidelines). Interact with business customers & representatives, demonstrating an understanding of & regard for construction project. Assist supervisor, when necessary, in following up on unacceptable workmanship to ensure work is completed to customer and company specifications. Recognize & escalate to a supervisor persistent field inspection issues or other observed factors that could impact the ongoing relationship between client and company. Evaluate field inspector standards audit program to ensure all work passes the client's specifications prior to billing. Utilize & demonstrate proficiency with construction tasks, tools, test equipment & information that will enhance field inspection results. Enter inspection findings in established company database in accordance with policy & procedures. Maintain accurate records. Operate communications device in accordance with company policies. Operate a company vehicle in a safe & responsible manner; Clean, maintain, stock & secure assigned vehicle & equipment in accordance with company policies. Adhere to industry specific, local, state & federal regulations, as applicable. Know, understand & follow company policy. Perform other duties as requested by supervisor. Assist in driving a field inspector-centered culture in all project and field offices. Qualifications: Ability to read, write, speak and understand English Solid financial management skills including forecasting, analyzing and planning Strong analytic, organizational, and problem-solving skills Ability to work well under pressure, handle multiple priorities, and anticipate and meet deadlines Strong interpersonal and communications skills Ability to prioritize and organize effectively Demonstrated leadership qualities Ability to maintain confidentiality Ability to work independently Ability to use personal computer and software applications (i.e. word processing, spreadsheet, etc.) Working Conditions Office environment, Flexibility to work extended hours Disclaimer Statement This is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with this position. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned. Requirements:

SUMMARY OF ESSENTIAL FUNCTIONS: Under the direction of the Group Lead/Supervisor perform the duties assigned with Rod Inspection, utilization of equipment for inspecting, operate overhead cranes and utilizing forklifts to support all functions of the Rod Inspection. SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO: Move materials and items from receiving or storage areas to shipping or to other designated areas Sort and place materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, color, or product code Opens bales, crates, and other containers Wear required PPE. Follow all policies and procedures communicated by Endurance Lift Solutions. Accomplish all the above task keeping safety and housekeeping a priority Attend Basic Safety Training and exhibit behavior consistent with training Attend Safety Meetings and exhibit behaviors consistent with the safety culture Attend Basic course on Waste Elimination and 6S and exhibit knowledge obtained in training Obtains signed approval of delivery tickets from customer personnel in a timely manner. The employee will be assigned other duties as necessary Reviews and completes all paperwork required in the transacting of pumps, sucker rods, supplies, and safety equipment sales. Takes telephone calls from customers for service work and equipment sales and completes necessary paperwork. Assist Shop Manager/Supervisor in assuring the accuracy of shop inventory. Requirements EHS REQUIREMENTS: Complete all work in a safe manner and follow all safety requirements consistent with supporting the company's TRIR goals. Follow all environmental requirements consistent with supporting the company's environmental performance goals. Complete, and actively participate in all of the company's IScout training requirements. Employee will be assigned other duties as necessary POSITION REQUIREMENTS: Requires a High School diploma or general education degree (GED) Travel Requirements: Up to 10% Must be able to sit and/or drive a vehicle; a minimum of 2 hours and often up to 4 hours. Ability to read and comprehend simple instructions, short correspondence, and memos Ability to write simple correspondence as required Ability to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions, and decimals Ability to learn, be certified and operate an overhead crane Ability to learn, be certified and operate various forklifts A combination of the above qualifications will also be considered PHYSICAL/MENTAL REQUIREMENTS: Must be able to stand for extended periods of time. Must be able to maneuver to all areas of a shop or warehouse. Must be able to lift up to 70 pounds and carry up to 50 pounds. Must be able to safely bend, reach, kneel, twist, and grip items while working in the area. Must be able to safely mount and dismount from the back of a truck, and bend, reach, kneel, twist, and grip items while working at the area. Must have manual dexterity and coordination to operate hand tools and mechanical tools. Must be able to work at a fast pace. Must be able to tolerate changing priorities, and complete assignments despite frequent interruptions. Must be able to respond to visual and aural cues. Must be able to drive a one-ton pick-up truck. Must be able to read, write, speak, and understand English. WORK ENVIRONMENT: The work environment is typically considered within an Endurance Lift Solutions location during normal or extended business hours. Work environment may also include customer sites including oil well sites, and meeting venues, extensive time off-site while traveling or to other locations as required.

Quality Control Inspector Company: Loenbro - Industrial Services Group Reports To: Regional Quality Manager Do you want to work for an industry leading, growing, diversified employer who believes in doing what we say, leading by example, doing the right thing, and practicing stewardship? Loenbro is a leader in the industrial services space who strives to be more than just a contractor to our customer, but a business partner who provides superior quality and service. This is your opportunity to work for a great employer who puts employees and their customers first. We have worked hard to build and maintain our reputation and are looking for industrious, conscientious, and motivated individuals to join our team. We encourage you to visit our website at *************** to learn more about our organization and who we are. Position Overview: We are looking for an experienced initiative-taking QC Inspector to join our growing Industrial Construction team. This position will be responsible for the duties listed below along with other related functions. A team-oriented mentality and the drive to continuously improve is what sets the Loenbro team at the top of the industry. This position works closely with related engineering, construction, fabrication, and other departments to ensure that the team's aligned goals are met. Employee will be expected to travel to remote jobs as needed throughout the intermountain region and possibly beyond Job Duties: * Weld Map Isometric drawings. * Enter welding and inspection information into tracking tools. * Assist with pressure testing plans and functions. * Review and File NDE/NDT Reports. * Work with NDE personnel for planning and execution of work. * Assemble and review project documentation packages. * Perform and document inspections based on drawings, specifications, and procedures to determine compliance. * Perform weld inspections. * Review welding requirements and ensure welding procedures comply. * Create and implement Project Quality Assurance Plans. * Provide support and training to other inspectors. * Write inspection and assess plans (I&TP's). * Committed to Loenbro's core values and safety policies. Skills/Qualifications: * Have a current AWS CWI or ASNT VT II or ability to pass the VT II exam. * Knowledge of NDT methods (UT, MT, PT, RT) with ASNT-SNT-TC-1A documented training/hands on hours. * Well-rounded with ASTM standards and materials. * Efficient in Microsoft Excel and Word. * Ability to communicate effectively with co-workers Quality Control Inspector. * Excellent interpersonal written and verbal communication skills. * Elevated level of organizational skills. * Extensive knowledge of reading and understanding drawings. * Must be a quick learner and motivated. * Ability to travel and relocate as needed. * Initiative-taking with the drive to learn and grow. * Must be able to work as a team. Essential Requirements: * Comply with all company policies and procedures. * Ability to work in a challenging environment. * Climbing up and down stairs and ladders while working on scaffolds and in trenches to access work. * Lifting up to 50 pounds. * Walking on uneven terrain for extended periods. * Standing for extended periods. * The use of respirators if required by projects Quality Control Inspector. * Driving if required to travel to and from locations. * Occasionally you may need to kneel, reach, or stoop. * If driving is required, a valid driver's license and proof of insurability is required. All drivers are subject to a DMV background records search. Benefits * Personal Time Off (PTO). * Holidays: 6 paid holidays. * Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage. * 401(k) Retirement: The Company provides a 100% match of the first 4% of employees' contribution each year, to the plan. Eligibility is immediately following 90 days of employment. We are "Leading the Change" in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION WE DO WHAT WE SAY WE LEAD BY EXAMPLE WE DO THE RIGHT THING WE PRACTICE STEWARDSHIP Loenbro is an Equal Opportunity Employer.

Job Description Avmax is looking to expand its workforce in Great Falls, MT. If you have the necessary experience and motivation to become a part of our team, please apply at ************** About Avmax: Avmax is a diverse company offering every product and service related to aviation. We have locations, operations, and deployment worldwide. Our vision at Avmax Group Inc. ("Avmax") is to simplify our customers' aviation needs through dependable, globally integrated services with trusted results. Established in 1976, our locations include: Calgary (HQ) and Vancouver in Canada, Great Falls and Jacksonville in the USA, Nairobi in Kenya, and N'Djamena in Chad. Avmax offers the following capabilities: Aircraft Leasing, Airline Operations, Avionics, Component Repairs, Engineering, MRO, Paint and Spares. Avmax's engineering division is a Transport Canada authorized Design Approval Organization (DAO). Avmax's maintenance division is a Transport Canada authorized Maintenance Repair Organization (MRO). Why work at Avmax? Avmax has a diverse workforce with opportunity for growth and career advancements. We offer competitive compensation and benefit packages, flexibility, work-life balance and a friendly working environment. We are proud of our work and commitment to create one of the leading workforce, products and services in the Aviation industry. Reporting: The Quality Control Inspector reports directly to the Quality Control Manager. Core Competencies: Communication Attention to detail Organization Professionalism Critical Thinking Key Performance Indicators / Duties & Responsibilities: Review all Major Repair Data and Progress on each project for completions and accuracy. Act as RII inspector for all Major Repairs. Planning of all Major Repairs. Report unserviceable maintenance equipment to their assigned Project Manager. Carry out inspections (MRB and Buyback) on aircraft following the applicable standards of airworthiness. Ensure that all reportable Service Difficulties and Irregularities are completed and forwarded to Quality Assurance & SMS in a timely manner. Attend training courses as directed by company management. Act as a receiving inspector for parts as required. Ensure parts are scrapped in accordance with Scrap Parts program on the approval the Project Manager or Customer's authority. Certify components repair by Avmax (e.g. batteries, cowling etc.) Ensure all defects being deferred have been done following proper procedures. Ensure material required for generated non-routines has been researched accurately and placed on order. Provide technical assistance or guidance to the crew. Communicate when tasks are complete so next trade can move onto the job. Ensure that all crew members' paperwork is up-to-date. Ensure work environment is safe and clean. Promote company values, vision, and mission. Certify aircraft for return to service. Qualifications: Certified A&P. Good knowledge of aviation regulations. Demonstrated ability to work well with other individuals throughout the organization. Possesses strong fundamental aircraft knowledge. Demonstrated capability and competency in field of expertise. Experience: 18 months experience in the field is preferred. Qualifications: Requirements include an A&P license, excellent oral and written communication skills, the ability to lift up to 50 lbs. NDT experience is preferred. Experience with CRJ 200/700, Dash 8, BAE 146, and/or EMB 120/135/145 is preferred. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job. The employee will be required to; Occasionally lift 50 pounds Bend Stoop Kneel Crawl Climb ladders Stand for extended periods of time Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary. Our recruitment commitments: We thank all applicants for their interest; however, only those selected for an interview will be contacted. Depending on qualifications, selected candidates may be offered a role at a more appropriate level. Avmax Group offers a competitive compensation package including an optimal benefits plan and retirement plan. Avmax Group Inc. is dedicated to and prides itself on being an EEO/AA employer. We celebrate and welcome the diversity of all of our employees. Avmax Group Inc. has specific policies in place to prevent discrimination in our hiring practices on the basis of the protected groups. Avmax is a drug free work environment and participates in pre-employment and random alcohol and/or drug screening. Job Posted by ApplicantPro

Salary Description $21-26/HR

Commercial Independent Contractor for Insurance Loss Control. The physical characteristics, exterior measurements, general conditions, photographs, unusual hazards and recommendations associated with a property are part of our comprehensive reports that summarize the observable hazards associated with a risk. The above information is used by our client companies to determine whether a risk meets the carrier's eligibility requirements. Inspectors are the "eyes" for the insurance underwriter, who is generally in another area and confined to an office. Inspectors set their own hours and work schedules in which they organize to accommodate the needs of our clients. Insurance Inspector Independent Contractor Qualifications: Be an energetic individual capable of completing a high volume of insurance inspections. Be motivated, analytical, resourceful, decisive, and have good problem-solving skills. Have solid written, composition and verbal communication skills. Have a strong desire to succeed and work independently with limited direction & guidance. Be self-disciplined, organized and able to manage an aggressive workload and have the ability to prioritize and schedule inspections timely and efficiently. Not necessary but a plus: VIITA Certification, previous experience in construction/plumbing/electrical industries, life safety/firefighting, general contracting or property management. Insurance Inspector Technical Requirements: A Microsoft Windows based PC Windows 10 Google Chrome or Edge and Microsoft Internet Explorer 11 Adobe Acrobat Reader Broadband internet connection Digital camera or smart phone capable of interfacing with your PC Color inkjet or laser printer. Reliable, insured transportation and valid driver's license A measuring wheel, monopod and a clipboard. If you meet the above criteria, please submit your resume, accompanied by a short, but precise, cover letter explaining why you feel you are suited for this position. Candidates are subject to criminal background checks. If you meet our qualifications, you will be contacted immediately.

Job Details Billings, MT - Billings, MTDescription API 510, 570, 653 Inspector At the direction of the client, perform visual and non-destructive examinations of static and dynamic pressure retaining equipment in accordance with American Petroleum Institute (API) standard 570 and the American Society of Mechanical Engineers (ASME). Submit to client technically accurate reports documenting equipment condition. Provide client with technical recommendations for the repair, re-rate, replacement, and/or alteration of plant equipment, as required for safe operation within stated operating parameters for durations specified by client. Provide technical input to client as required for welding and metallurgical issues. Provide technical guidance, on an application of non-destructive examination techniques and procedures. Fully comply with all Xcel NDT and client safe work practices and actively participate in all site safety initiatives. Qualifications One of more API Certifications - API 510/570/653 Physical Demands and Work Conditions * Standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling, fingering, feeling, talking, hearing, visual acuity, accommodation and color vision * Moving, carrying, lifting, objects in excess of 50 lbs * Climbing and working off of ladders, stairs, and scaffolding in excess of 100 ft * Working extended hours and standing for extended periods of time * Work in indoor and outdoor environments in conditions of extreme heat and cold * Work in and near industrial hazards.