Inspector jobs in Burlington, NC

DESCRIPTION As a part of our Transportation Team, the Inspector will oversee construction projects to ensure conformance with all applicable plans, specifications, and contact special provisions. You will be responsible for the inspection of the contractor's methods and workmanship to ensure adherence to approved plans, specifications, and contract special provisions related to constructing bridges and box culverts to ensure a quality product for the client. Preference will be given to candidates with structural or bridge inspection experience. (Substructure inspection, Superstructure inspection, Basic surveying, Box culvert inspection). PROFESSIONAL REQUIREMENTS 5+ years' experience HS Diploma or GED Experience in construction inspection, in bridge and/or highway Computer skills: MS Office NCDOT certifications COMPENSATION The approximate compensation range for this position is $27.96/hr. to $42.63/hr.. This compensation range is a good faith estimate for the position at the time of posting. Actual compensation is dependent upon factors such as education, qualifications, experience, skillset, and physical work location.

Responsibilities: Check for completeness Verification against contractual requirement Provides timely, detailed reports and photographic evidence as requested High availability and flexible job scheduling. Technical & Industry Experience: 3-5 years minimum experience in quality or visual inspections with furniture and upholstery skills. Measuring experience • Experience in quality inspections • Experience in furniture and upholstery • Must be able to use MS Word and Excel to submit documents and reports within the time specified (usually within 24 hours after job completion) • Ability to work well in independent and group problem-solving situations • Ability to maintain a positive, professional disposition when adapting to occasional disruptions and unexpected events • Flexibility in scheduling Job Type: 1099 Contractor Project Duration: Note: This is a 1099 contract role - project duration may vary based on client needs Shift Hours: Note: As a 1099 contractor, project schedules may vary depending on site availability Location: Must be able to travel to Liberty, North Carolina, USA and nearby areas (exact CLIENT address can ONLY be shared once contractor joins) Compensation: $20.00 - $30.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

L & J. G. Stickley, Inc. (Stickley) is a leader in the furniture manufacturing and retail industries, with brands that are respected and cherished worldwide. With over 120 years in furniture manufacturing, and more than 80 years as a furniture retailer, Stickley is the proud employer of nearly 900 talented individuals. We have three manufacturing facilities, multiple corporate-owned retail showrooms, and a global distribution network. We have an opening for an Experienced Quality Inspector at our Upholstery Manufacturing facility in Archdale, NC. Qualifications & Job Responsibilities Minimum 2 years of experience inspecting furniture for high-end, luxury brands Ability to read production tickets and any special instructions Utilize tools such as tape measure, regulator, ice pick, scissors, air hose, steamer, heat gun Add filler material to cushions, backs, and cores as needed Make sure all seams are straight If applicable, make sure skirt, trim, and nails are attached properly Check fabric & leather for flaws Make sure finishing/exposed wood and feet are correct with no scratches Make sure cushions fit and line up Use air hose to clean up piece, cut threads, and make sure piece looks neat and presentable before sending to packing department Benefits Stickley offers a competitive benefits package including: Perfect Attendance Program-Earn MORE Paid Time Off! Early morning to afternoon work schedule Paid Time Off 9 Paid Holidays each year Weekends Off Group Health, prescription, vision, and dental coverage Company paid life insurance 401K Flexible Spending Employee Assistance Program Stickley "Fit for Life" Wellness Program Part-Time Doctor and Occupational Health Nurse on-site Corporate YMCA & Planet Fitness Discount Program Employee Furniture Discount Program The compensation range provided in this job posting is a general guideline. When extending an offer, Stickley considers factors including but not limited to the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Stickley is an equal opportunity employer committed to diversity and inclusion.

Now Hiring: Quality Auditor - Welcome/Lexington, NC Join our team as a Quality Auditor and take your career to the next level! Pay: Starting at $19.20/hr - pay increases based on shift Schedule: All shifts available Requirements: Minimum 2+ years of experience in quality assurance or inspection Strong attention to detail and accuracy in documentation Dependable and team-oriented Call ************ for more details - tours held every week! Apply today and secure your spot with a company that values quality and experience!

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Rockingham, Guilford, Alamance, Caswell Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

RK&K's Construction Management and Engineering (CEI) team is currently hiring Construction Inspectors with interstate, roadway and bridge construction experience throughout North Carolina. As a Construction Inspector with RK&K you will perform complex and routine inspections on materials, processes, safety, and documentation to ensure construction conforms to plans, specifications and special provisions. Essential Functions As a construction inspector in RK&K's Construction/CEI division you will perform complex and routine inspections of construction to evaluate if appropriate materials and construction processes are being used; and that construction conforms to plans, specifications, and special provisions Reviews drawings to prepare for the inspection. Understands the design of the construction that will be inspected Documents the results of the inspection and communicates to the supervisor Conducts field measurements to establish quantities for pay item documentation as well as other contract administration documentation Inspects work zones for proper traffic control setup, erosion control devices and maintenance thereof, utility coordination and right-of-way issue resolution Preferred Skills and Experience Minimum 1 year of inspection experience required Experience and certifications in NCDOT inspection and materials testing (earthwork, asphalt, concrete, pavement preservation and Erosion & Sedimentation Control) is preferred Experience with NCDOT's construction procedures is a plus Valid driver's license and favorable driving record Ability to lift up to 50 pounds Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

TAT Technologies (Greensboro facility) is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies is looking for a qualified Quality Inspector (APU). This position will ensure quality is maintained through documentation, workmanship and in-process surveillance while maintaining compliance of all applicable FAR's and OEM standards pertaining to Auxiliary Power Units (APU), aviation parts, material, processes and product for TAT Technologies. Primary Job Functions: Audit work order packages for accuracy and completeness. Perform final inspection and return to service on products delivered to QC. Scrap rejected parts and maintain scrap room. Perform initial inspection on customer repair orders to gather information to have the work order opened. Additional Job Functions: Perform receiving inspection on stockroom parts. Participate in the monthly internal audits as directed. Assist with build check points as needed. Assist Calibration/Librarian technician as needed. Other Quality related functions as directed by Crew Chief, Chief Inspector or Director of Quality Requirements Two-year Technical school degree or higher and/or equivalent experience. Technical Degree in Aerospace advantageous. 5-years' experience in aviation components, preferred. Airframe & Powerplant (A&P) License recommended. Able to obtain Repairman Certificate within 3 months of hire date if not a current Licensed A&P Thorough working knowledge of and ability to interpret FAA regulations. Experience with FAA manuals and government forms. Proficient in the use of precision measurement equipment related to Aviation Inspection/s Excellent organizational skills are necessary. This job requires exemplary interaction skills with clients and auditors. Demonstrated oral & written communication skills and good telephone manner. Ability to operate standard office equipment and good PC skills (MS Word, Excel, Outlook & Quantum). Overtime and shift/schedule flexibility, required Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities - TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

The Inspector is responsible for inspecting the final product before it is packed, looking for defects and deviations from specifications. Key Responsibilities: Ability to read complex production tickets and any special instructions Utilize tools such as scissors, fabric steamers and cleaning products Ability to work at a productive pace with no errors Understanding of fabric layout-COM, Center cut, flow match, plain cover Must be knowledgeable in upholstery methods and be able to complete quality control specifications. This position requires manual dexterity, fine motor skills, and attention to detail to meet high quality standards. Job requirements Experience/Certifications/Education: High school diploma or equivalent The ability to stand, walk and move for up to eight hours per day Previous experience with upholstery inspection and furniture manufacturing Abilities/Key Competencies/Skills: Must be able to work thoughtfully and thoroughly with continuous attention to detail Ability to learn quickly and retain a wide range of small details concerning multiple product types, tasks, system processes, issues, and/or projects Excellent time management and organizational skills Comfortable multi-tasking, or, pivoting between tasks as the need arises Willingness to learn new products, procedures, and processes as business needs change A friendly attitude with the ability to deliver exceptional customer service and be a team player and stay self-motivated in a fast-paced environment Intermediate knowledge of computer skills and Google Suite products Excellent written, verbal and email etiquette communication skills A friendly attitude with the ability to deliver exceptional customer service and be a team player and stay self-motivated in a fast-paced environment Physical Demands: Must be able to stand, stoop and bend for 8 hours or more daily Must be able to move around the production floor to complete finishing tasks Must be able to stoop, kneel or crouch to complete finishing tasks at at low level Must be able to carry and/or lift up to 50 pounds Must have the ability to observe details of finished product at a close range Must have the ability to communicate information and ideas so others can understand. Must be able to exchange accurate information. All done! Your application has been successfully submitted! Other jobs

Job Description Monday - Thursday 5:00pm-5:00am with a 15% SHIFT PREMIUM! Machine Specialties, LLC is a leading contract machining and metal finishing company that designs an manufactures sophisticated, cost-effective solutions to meet our clients' most demanding challenges. Our company is located in Whitsett, NC, about 8 miles outside of Greensboro, NC. We are currently looking for a Quality Inspector to join our team. The Quality Inspector is responsible for completing final inspections prior to shipment, as well as in process inspections to support shop manufacturing. This role involves conducting inspections, testing, and documenting findings to maintain compliance with regulatory and company requirements. This is an hourly position that will report directly to the Quality Inspection Manager. Position Responsibilities Study and interpret product specifications to ensure product conformity Establish inspection plans and part acceptance criteria based on drawing requirements and customer feedback. Examine manufactured products, primarily aerospace machined parts, to ensure they parts meet all standards of presentation and quality Identify and communicate existing and potential quality issues Perform dimensional inspection on machined parts using a variety of precision metrology instruments such as height gages, micrometers, bore gages, etc. Collect and record data regarding defects Document and process nonconforming product Demonstrate flexibility within a fast-paced challenging environment Ability to coordinate, prioritize, and multitask Identify non-conforming materials and products, document discrepancies, and participate in root cause analysis and corrective action processes. Participate in continuous improvement initiatives to enhance the efficiency and effectiveness of the inspection and quality control processes. Follow all safety protocols and procedures to maintain a safe working environment. General Expectations Be responsible for the productivity and quality of your work and work performed in support of teams. Share skills, knowledge and experience so that common goals are achieved Continuously strive to develop skills and abilities Maintain schedule and communicate effectively with others Required Training/Education/Experience High school diploma or GED equivalent required Minimum 3 years inspection experience Machining experience preferred. Aerospace manufacturing experience is preferred. Must be able to pass a vision test, eyeglasses or contacts are acceptable. Equal Opportunity Employer including Veteran's/Disabilities

NV5 (NASDAQ: NVEE) provides engineering and consulting services to public and private sectors, delivering solutions through five business verticals: Construction Quality Assurance, Infrastructure, Energy, Program Management, and Environmental. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives. Responsibilities We are seeking CEI Inspectors throughout North Carolina. * Acts as a CEI Inspector on roadway and bridge projects and supports the Senior Inspector. * Performs daily observations of construction work conformance with project plans and specifications. * Performs field testing, documents construction activities, and tracks quantities of work items performed. * Maintains appropriate records and prepares required reports. * Performs other duties as required by the Senior Inspector, Project Administrator and Senior Project Engineer. Qualifications * Qualified candidates will have High School education or equivalent and adequate experience to perform inspection duties required of the position. * Ability to read and interpret roadway plans * Strong oral and written communication skills * Ability to use Tablet, Laptop, or other electronic devices and software proficiently. * Clean driving record; and and ability to pass a drug screen. * Ability to work all shifts outdoors in all types of weather conditions. * Ability to safely lift and transport upto 50 pounds of equipment traversing uneven and hilly terrain. * Ability to commute upto one (1) hour from home or office daily. Preferred Certifications/Licenses: * NCDOT Concrete Field Inspector Level I * NCDOT Asphalt Roadway Level I * NCDOT Conventional Density Certification * NCDOT Level II Erosion and Sediment Control Inspection Certification #LI-HH1 NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k) and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Recruitment & Staffing Agencies: NV5 Inc does not accept unsolicited resumes from any source other than passive & active candidates and employee referrals. The submission of unsolicited resumes by recruitment or staffing agencies to NV5 or its employees is strictly prohibited unless contacted directly by NV5's internal Talent Acquisition team seeking 3rd party sourcing assistance. Any resume submitted by an agency in the absence of a signed agreement and given permission to represent NV5 to candidates on a particular search, NV5 will not owe any referral or other fees with respect to the unsolicited submission.

Job DescriptionFMM is seeking a motivated professional to fill our Lighting Inspector contract position. FMM is a maintenance and construction company located in Denham Springs, LA servicing both residential and commercial clients nationwide. At FMM, we are committed to providing superior levels of service to our clients while maintaining our core values of Quality, Teamwork, Integrity, Safety, and Versatility. Job Summary The Lighting Inspector will perform quarterly lighting inspections at night for our commercial bank clients. Lighting inspections will be performed in the evening and overnight hours while lighting requirements can be fully measured. Inspections are performed at each location once a quarter and pay is contingent upon the completion per location. Essential Job Duties and Responsibilities: ( Included but not limited to) Take inspection photos of facilities operated by bank clients of FMM. Document the overall site lighting, particularly whether lights are operating or not, and with special emphasis on the lighting in and around the ATM and Night Drop equipment. Upload photos and a site diagram showing any outages. Light meter reading will need to be taken, recorded, and sent to FMM for review twice a year. Required Skills and Abilities: 1-2 years of experience Willing and able to learn new computer programs Ability to pass a drug screen Ability to travel regionally to various client sites as needed Locations: This position will be in charge of the Central North Carolina region and the Inland Virginia region. NC Cities included: Raleigh, Asheboro, Mebane, Chapel Hill, Oxford, Seagrove, Roxboro, Graham, Burlington, Hillsborough, Siler City, Kernersville, Cary, Greensboro, Durham, High Point, Sanford, Morrisville, Archdale, Wake Forest, Southern Pines, and Fayetteville Virginia Cities: Stuart, Martinsville, Rocky Mount, South Boston, Collinsville, and Hardy Appx number of locations: 45 sites Pay per location: $30 At FMM, we provide our clients with high quality, high value maintenance and constructions services while maintaining superior levels of communication, professionalism, integrity, and honestly with our staff, clients, suppliers, and professional associates. Our core values of Quality, Teamwork, Integrity, Safety, and Versatility are our driving force. If you are an individual who possesses these values, we look forward to hearing from you.

NV5 (NASDAQ: NVEE) provides engineering and consulting services to public and private sectors, delivering solutions through five business verticals: Construction Quality Assurance, Infrastructure, Energy, Program Management, and Environmental. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives . Responsibilities We are seeking CEI Inspectors throughout North Carolina. Acts as a CEI Inspector on roadway and bridge projects and supports the Senior Inspector. Performs daily observations of construction work conformance with project plans and specifications. Performs field testing, documents construction activities, and tracks quantities of work items performed. Maintains appropriate records and prepares required reports. Performs other duties as required by the Senior Inspector, Project Administrator and Senior Project Engineer. Qualifications Qualified candidates will have High School education or equivalent and adequate experience to perform inspection duties required of the position. Ability to read and interpret roadway plans Strong oral and written communication skills Ability to use Tablet, Laptop, or other electronic devices and software proficiently. Clean driving record; and and ability to pass a drug screen. Ability to work all shifts outdoors in all types of weather conditions. Ability to safely lift and transport upto 50 pounds of equipment traversing uneven and hilly terrain. Ability to commute upto one (1) hour from home or office daily. Preferred Certifications/Licenses: NCDOT Concrete Field Inspector Level I NCDOT Asphalt Roadway Level I NCDOT Conventional Density Certification NCDOT Level II Erosion and Sediment Control Inspection Certification #LI-HH1 NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k) and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Recruitment & Staffing Agencies : NV5 Inc does not accept unsolicited resumes from any source other than passive & active candidates and employee referrals. The submission of unsolicited resumes by recruitment or staffing agencies to NV5 or its employees is strictly prohibited unless contacted directly by NV5's internal Talent Acquisition team seeking 3rd party sourcing assistance. Any resume submitted by an agency in the absence of a signed agreement and given permission to represent NV5 to candidates on a particular search, NV5 will not owe any referral or other fees with respect to the unsolicited submission. NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k) and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Recruitment & Staffing Agencies : NV5 Inc does not accept unsolicited resumes from any source other than passive & active candidates and employee referrals. The submission of unsolicited resumes by recruitment or staffing agencies to NV5 or its employees is strictly prohibited unless contacted directly by NV5's internal Talent Acquisition team seeking 3rd party sourcing assistance. Any resume submitted by an agency in the absence of a signed agreement and given permission to represent NV5 to candidates on a particular search, NV5 will not owe any referral or other fees with respect to the unsolicited submission.

Performs both simple and complex NDT inspection procedures on aircraft parts, structures, and systems in accordance with applicable standards and specifications. Performs both primary NDT inspections and buy-back NDT inspections as assigned. Writes up inspection items accurately, noting discrepancies clearly. Uses micrometers, gauges, calipers, indicators, and other measuring instruments and test equipment in the performance of skilled inspection work. Performs NDT and/or borescope inspections when applicable. Prepares necessary records such as inspection documentation, logs, or other records thoroughly, legibly, and in a timely manner. Performs buy-back NDT inspections ensuring that previously noted and subsequently repaired items have been properly completed and documented. Interprets blueprints, drawings, and other technical data. Researches and retrieves technical data as necessary. Maintains an updated, current knowledge of technical information and inspection techniques and requirements through adequate research and technical reading. Lifts and carries measuring instruments, tools, and test equipment; ascends and descends ladders and platforms; and frequently works in a variety of positions such as stooping, kneeling or squatting. Follows safety procedures and wears and utilizes appropriate safety equipment for the work being performed. Reads instructions and safety information as necessary for proper and safe completion of assigned work. Communicates effectively in English regarding work activities, per FAA requirements. Performs other duties as assigned. Position Profile[Equation] Required Desired Level Academic Qualifications High School Diploma or GED required. x Languages Must be fluent in spoken and written English. Spanish a plus x Special Licenses Qualified Level I or II preferred but prefer someone who does possess NDT certification in Ultra Sound (UT), Eddy Current (ET), Magnetic Particle (MT) and Penetrant (PT) x Should be A&P licensed but not required if applicant possess commercial aircraft NDT experience under a Repairman Certificate through former employer x Previous Experience Must have 4 plus years' experience hands on aircraft NDT, commercial MRO preferred. x Documented hours and training required x Technical Skills Position requires proficiency in software applications including Microsoft Office and ability to utilize Flightstar's operating system (EMX web and tablet). x Required Skills Must have formal training in Non-Destructive Testing or Inspection x Must pass the Titmus Eye Exam for visual acuity x

Full-time Description SUMMIT HOSPITALITY GROUP: HOUSEKEEPING SUPERVISOR JOB DESCRIPTION SUMMARY: The Housekeeping Supervisor for Summit Hospitality Group/Hyatt Place Durham Southpoint is responsible for ensuring property guestrooms/suites, all public space, and associate areas are clean and well maintained. Completes inspections and holds housekeeping staff accountable for corrective action and to Corporate and Brand policies, procedures and standards. Position assists in ensuring guest and associate satisfaction while maintaining the operating budget. PREREQUISITES/QUALIFICATIONS: · High school diploma or GED, 2 years of experience in housekeeping or related professional area · Command of English including speaking, reading, writing · Familiar with inventory controls and ordering · Effective communication skills · High energy and professional demeanor · Basic computer skills DUTIES & RESPONSIBILITIES: · The expectations of this position require a 40 hour work week which includes weekends (Saturday and/or Sunday). Hours beyond 40 must be approved in advance by your supervisor. This only applies to Associates who are non-exempt · Ensures guest room status is communicated to Front Desk in a timely and efficient manner · Inspects guest rooms, public areas and staff areas on a daily basis · Inventories stock to ensure adequate supplies · Supports and supervises an effective inspection program · Ensures all Associates have proper supplies, equipment, safety equipment, and uniforms · Communicates quickly and efficiently to GM/AGM/GSM/Chief Engineer areas that need attention and maintenance · Supervises daily housekeeping shift operations · Ensures hotel is prepared to successfully complete a Quality Assurance audit · Establishes and maintains open and collaborative relationships with all management and staff · Recognizes Associates and uses an “open door policy” for good work and guest relations · Meets or exceeds budget goals and objectives for the Housekeeping department · Duties are subject to change and additional responsibilities/tasks may be assigned as needed. Requirements WORK ENVIRONMENT: · Flexible work schedule · Able to lift 25 lbs. · Standing, sitting, walking, reaching and bending for extended periods of time

Inspects metal and/or beverage cans for conformance to specifications using fixed or preset measuring instruments Examines material or product for surface defects and incomplete finishes. Compares product with parts list or sample model to ensure completion of assembly. Verifies specified dimensions of product or material using inspection equipment Rejects defective parts and marks type of defect on part container of parts or inspection tag. KEY JOB COMPETENCIES/PHYSICAL DEMANDS Able to work 12 hour/4 day week rotating shift Successfully complete pre-employment drug test and background check Have a high school diploma or GED Able to stand for a long duration of time Able to bend over and rotate body repeatedly Able to lift 40 pounds; push/pull up to 75 pounds Exposure to heat, cold, vibrations, odors/fumes and loud noise Ability to pass the Ramsay Basic Skills test (A4) at 65% or higher Willing and able to work overtime weekends, holidays and night shifts, if needed Ardagh Metal Packaging is a leading global supplier of sustainable, infinitely recyclable metal beverage cans to brand owners. A subsidiary of sustainable packaging business Ardagh Group and a leading industry metal packaging company, Ardagh Metal Packaging employs more than 6,300 people across Europe, North America and Brazil, with sales of approximately $4.7 billion. Ardagh Metal Packaging believes that the success of our business depends on the success of our people. We strive to create working environments where our employees feel valued and can work to their full potential. We offer exciting and rewarding opportunities for talented and creative people. If you have ambition and want to make an impact with your career, come and join our team - you'll enjoy the journey! Ardagh Metal Packaging - North America has been and will continue to be an equal opportunity employer. All employment decisions are made without regard to sex, gender (including pregnancy, childbirth, breast feeding, and related conditions), sexual orientation, gender identity, gender expression, race, creed, religion (including religious dress and grooming), color, national origin, ancestry (including association, affiliation, or participation with persons or activities related to national origin, English-proficiency or accent, or immigration status), physical or mental disability, medical condition, genetic information, marital or domestic partner status, age, veteran or military status or any other basis prohibited by federal, state, or local law. Discrimination against any employee or applicant based on any of these factors is prohibited.

Full-time Description The Quality Inspector is responsible for inspecting, auditing, and verifying materials, processes, and products to ensure they meet Laminate Technologies' quality standards. This role plays a vital part in identifying non-conformances, documenting findings, and supporting root cause and corrective action activities. The position works closely with production and quality teams to monitor compliance and support a culture of continuous improvement and operational excellence. Requirements Perform routine in-process and final product inspections using established quality procedures, tools, and documentation practices. Inspect raw materials and purchased parts for conformance to specifications. Accurately record inspection results and maintain organized, detailed documentation of findings. Identify and report any quality issues, trends, or deviations to leadership and assist in root cause analysis and corrective action. Conduct audits and verifications of processes, documentation, and finished goods per internal standards. Support quality assurance activities such as First Article Inspections, Gemba walks, and internal process checks. Follow established SOPs, work instructions, and quality standards to ensure product integrity and compliance. Assist in calibration and maintenance of measuring tools and inspection equipment. Communicate effectively with operators, supervisors, and other inspectors to resolve issues and maintain a focus on product quality. Promote a culture of quality and continuous improvement throughout the manufacturing facility. Understand, drive and implement the Lam Tech Quality System throughout the production plant. Follow established company and work area safety policies including the wearing of all required PPE's. Follow established company policies, including policies and rules outlined in Member Handbook as well as procedures required in the standard operating procedures/work instructions. Other duties and responsibilities as directed by your direct leader. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skill, and/or ability required. Minimum education: High school diploma. Technical training or associate degree in a quality-related field preferred. Minimum 1-3 years of experience in a quality inspection role in a manufacturing environment, preferably wood, laminate, or related industries. Experience with measurement tools such as calipers, micrometers, tape measures, and gauges. Basic understanding of quality systems, and non-conformance documentation. Familiarity with lean manufacturing and continuous improvement principles is a plus. Salary Description $19.00 to 22.50

Job DescriptionDescription: The Quality Control/Inspector checks the quality of all finished products. Performs inspections to assess product quality. Accepts or rejects finished products and discusses inspection results with the production team. Recommends necessary adjustments and changes to the production process. Performs tests on cutting, edge processing, tempering and other processes. Coordinates tests with machine operators. Manages quality of units (final product) that are finished and being loaded into crates by following the quality checklist. Examines finished product of all samples. May trim excess silicon or LAMI from glass to ensure the best quality for customer. Follows up on customer claims. Performs all other duties as assigned. Requirements: High School diploma required; additional education and/or experience is a plus. Proficiency in MS Office (MS Word, Excel, PowerPoint and Outlook) with the ability to quickly learn new systems. Keen eye for detail and a results-driven approach. Work well in the teamwork environment. Responsible and trustworthy. Familiarity with quality testing machines and systems. Can read and understand tape measure and other tools to measure products.

DESCRIPTION As a part of our Transportation Team, the Inspector will oversee construction projects to ensure conformance with all applicable plans and specifications. You will be responsible for the inspection of the contractor's methods and workmanship to ensure adherence to current quality standards as it relates to building roadways, bridges and highway structures in accordance with plans and specifications. Typical work will be on NCDOT bridge inspection and roadway inspection projects throughout the state of North Carolina. Preference will be given to candidates with structural or bridge inspection experience. PROFESSIONAL REQUIREMENTS •5+ years' experience •HS Diploma or GED •Experience in construction inspection, in bridge and/or highway •Computer skills: MS Office •NCDOT certifications •SharePlus The approximate compensation range for this position is 28.00 o 46.00 an hour. This compensation range is a good faith estimate for the position at the time of posting. Actual compensation is dependent upon factors such as education, qualifications, experience, skillset, and physical work location.

NV5 (NASDAQ: NVEE) provides engineering and consulting services to public and private sectors, delivering solutions through five business verticals: Construction Quality Assurance, Infrastructure, Energy, Program Management, and Environmental. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives . Responsibilities We are seeking CEI Inspectors throughout North Carolina. Acts as a CEI Inspector on roadway and bridge projects and supports the Senior Inspector. Performs daily observations of construction work conformance with project plans and specifications. Performs field testing, documents construction activities, and tracks quantities of work items performed. Maintains appropriate records and prepares required reports. Performs other duties as required by the Senior Inspector, Project Administrator and Senior Project Engineer. Qualifications Qualified candidates will have High School education or equivalent and adequate experience to perform inspection duties required of the position. Ability to read and interpret roadway plans Strong oral and written communication skills Ability to use Tablet, Laptop, or other electronic devices and software proficiently. Clean driving record; and and ability to pass a drug screen. Ability to work all shifts outdoors in all types of weather conditions. Ability to safely lift and transport upto 50 pounds of equipment traversing uneven and hilly terrain. Ability to commute upto one (1) hour from home or office daily. Preferred Certifications/Licenses: NCDOT Concrete Field Inspector Level I NCDOT Asphalt Roadway Level I NCDOT Conventional Density Certification NCDOT Level II Erosion and Sediment Control Inspection Certification #LI-HH1 NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k) and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Recruitment & Staffing Agencies : NV5 Inc does not accept unsolicited resumes from any source other than passive & active candidates and employee referrals. The submission of unsolicited resumes by recruitment or staffing agencies to NV5 or its employees is strictly prohibited unless contacted directly by NV5's internal Talent Acquisition team seeking 3rd party sourcing assistance. Any resume submitted by an agency in the absence of a signed agreement and given permission to represent NV5 to candidates on a particular search, NV5 will not owe any referral or other fees with respect to the unsolicited submission.