Inspector jobs in Cambridge, MA - 337 jobs

Working at Freudenberg: We will wow your world! Responsibilities: Measure and record product quality using, visual, mechanical and optical gauging instruments. Inspect incoming raw material to insure that all quality requirements have been met per acceptance activities and material specifications. Ensure conformance to certifications for all materials and components received. Identify and segregate non-conforming material for material review board (MRB) disposition Generate NCMR's and assign owners. Participate in Gauge R&R's Perform applicable materials testing per acceptance activities and/or specification. Strong knowledge of interpreting drawings, customer specification, test methods, and inspection criteria. Maintain complete, legible, and accurate records. Independently handle problems that arise within area of responsibility. Knowledge of cGMP's. Knowledge of scheduling methods and ability to change priorities when directed by Supervisor/Manager. Interact effectively with other employees within the department and the company. Release product to next location upon completion within SAP system. Qualifications: High School/Trade School Diploma or GED 1-2 years of experience in Quality Control Experience in the medical device industry preferred The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Medical LLC

Job Description Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required. Monday through Friday: 9:00AM - 5:00PM. Includes a 1-hour unpaid lunch break. 35 Hours per week.

JOB TITLE: Quality Control Inspection - DEFENSE PAY RATE: $30/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Clearance: Active Secret clearance preferred; previously held clearance acceptable Night Shift: Full-Time, Monday-Thursday, 4:00 PM - 2:30 AM Shift Details: Contractor must train on 1st shift for 4-6 weeks before transitioning to night shift Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Perform inspections supporting all phases of assembly and manufacturing Inspect subcontracted and purchased parts Interpret blueprints, wiring diagrams, and technical documentation Use basic measuring equipment and instruments to perform continuity checks Apply workmanship acceptance criteria on the production floor Identify, document, and report errors or discrepancies clearly and legibly Maintain inspection-related paperwork and documentation Follow proper procedures and safety precautions to prevent damage or injury Maintain a clean and orderly work/inspection area Perform additional duties as assigned Requirements: Active Secret clearance preferred; previously held clearance acceptable Interim clearance process begins at offer stage High school diploma required; no degree required Active J-STD-001 certification Active IPC-A-610 certification Ability to follow work instructions and interpret blueprints Basic math and instrument reading skills Computer literacy Ability to identify discrepancies Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Job DescriptionDEKA R&D has an immediate opening for a Quality Control Inspector to work in a dynamic Medical Device Research and Development company. This position is a highly visible role with significant and direct impact on the development and success of multiple engineering projects. Responsibilities as a Quality Control Inspector: Interpret Mechanical and Electrical print reading and apply inspection best practices Operate CMM equipment and utilize various measuring tools for inspection of medical device components Communicate effectively and promptly across multiple projects to provide feedback on inspection of parts Inspect various mechanical and electrical components and assemblies through incoming inspection Interpret ASME Y14.5 and GD&T standards throughout the inspection process for compliance and best practices Provide feedback on inspection activities to improve efficient whether individually or in a cross-functional setting To be successful as a Quality Control Inspector, you will need the following qualifications: 3+ years of experience in a regulated industry CMM programming, Metrology and/or CQI certified is a plus Basic GD&T knowledge required, Advanced GD&T knowledge preferred Proficient with mechanical measuring equipment such as micrometers, calipers, optical comparator Ability to operate CMMs following precise instructions Inspection of soldered components and Printed Circuit Board (PCB) assemblies; IPC-A-610 certification preferred Computer skills and knowledge; ability to learn new software (Experience with Jira is a plus) About DEKA: One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research & Development, where we are taking the same innovation and cutting-edge technology into the modern age. Behind DEKA's brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored. Powered by JazzHR VAABeEHa8x

Reads and interprets work instructions and blueprints to determine dimensions and tolerances. Interprets Geometric Dimensioning & Tolerance. Measures, inspects, tests and verifies machined, welded and finished parts for conformance to specifications. Manually operates CMM's, height gages, comparator, etc. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports First Piece, In-Process, Final, and F.A.I. Inspections. Reads blueprints or specifications to determine dimensions and tolerances. Verifies specified dimensions of product or raw material using verniers, micrometers, intramics, CMM, height gages, comparator, scales and or/other tools. Measures angular dimensions, radii, height, thickness, location, thread lead, and other specifications. Computes angles, radii, and other unspecified dimensions of work piece by using sine bars. Measures surface finish of parts. Inspects first run parts and assemblies. Examines material or product for surface defects such as cracks, pits, and incomplete welds. Tests units for fit of moving parts and mechanical functioning. Tests parts for hardness. Compares product with parts list or sample model to ensure completion of assembly. Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag. Writes reports regarding inspection and testing results. Manually operates and sets up Mitutoyo CMM's and FARO Arm. Supports inspection duties, quality objectives, and the Quality Management System. Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Verifies conformance of finished work piece to specifications. Assists in other areas in support of product conformity. Facilitates effective communications and working relationships (including answering department phone). Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements Two-year certification from college or technical school; or 5 years related experience and/or training; or equivalent combination of education and experience. Ability to manually operate and set up Mitutoyo CMM's. Must know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Must be flexible enough to work in all areas of operation per the direction of the Leadership. A personal and professional background sufficient to secure a Government Security Clearance is required. Advanced knowledge of inspection, plating & coating processes and raw materials a plus AAP/EEO STATEMENT GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. SEARCH / RECRUITING AGENCIES Granite State Manufacturing (GSM) does not accept non-solicited resumes or candidate submittals from search/recruiting agencies unless GSM requests such resumes, and the search/recruiting agency is on GSM's approved list of such agencies. Unsolicited resumes or candidate information submitted to GSM by search/recruiting agencies shall become the property of GSM and if the candidate is subsequently hired by GSM, GSM shall not owe any fee to the submitting agency. Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

Summary of Primary Responsibilities: The QC Incoming Inspector completes all activities required to approve raw materials for use in product manufacture. The position also performs inspection activities during in-process manufacturing. Specific Responsibilities: Perform quality line clears and in process inspections during the inspection and packing processes according to specific SOP requirements Issue lot numbers and control labels for incoming raw materials; perform inspections per internal procedures and specifications Release approved raw materials for use in manufacturing process to include completion of associated documents, notice of approval form (bin card) and relabeling of inventory Review MPS of other incoming inspectors for approval and release. Monitor and perform annual retain inspection; coordinate required retesting with QC; complete required documentation Perform OOS investigations and participate in MRB as required for rejected materials Perform as SME for the function and provide training as required to new employees, contractors and other QA personnel Perform biennial review for designated procedures and MPS as needed Documents; author and complete DCR as required Document all work activities according to Good Documentation Practices Maintain current training on all assigned procedures to include read & understood, skills development and classroom training activities as required Participate in other projects as assigned Job Complexity: The position works on assignments that are routine in nature and receives detailed instruction on all work. Supervisory Responsibilities: None Required Qualifications: Associates degree in the life science or relevant work experience 0 - 1 year of experience in a cGMP facility or previous experience in a QA/QC role within the industry; internship experience considered Experience using Microsoft Office or an ERP system Desired Experience, Knowledge, and Skills: Bachelor's degree preferred Experience working in a clean room environment Excellent communication and documentation skills The salary range provided is based on the Company's reasonable estimate of the base salary pay range for this position at the time of posting. Actual base pay is determined by several factors relevant to the position, including skills, competencies, experience, education, and geographic location. Anika also offers a discretionary bonus program for all full-time employees, comprehensive healthcare benefits, health savings account, 401(k) plan with up to 5% company match which includes immediate vesting, employee stock purchase plan at a 15% discount, accrued paid time off, additional long-term incentives including stock awards, and much more. At Anika, we take pride in offering robust Total Rewards, inclusive of market-leading benefits to meet our employees where they are in their career and in life. The compensation and benefits information is provided as of the date of this posting. Anika reserves the right to modify compensation and benefits at any time, subject to applicable law.

JOIN AN INDUSTRY LEADER! Quality First & Green Always Sloan is the world's leading manufacturer of commercial plumbing systems and has been in operation since 1906. We are at the forefront of the green building movement and provide sustainable restroom solutions. We manufacture water- efficient products including flush valves, electronic faucets, soap dispensing and sink systems along with vitreous china fixtures for commercial, industrial and institutional markets worldwide. About the Role: We have an opening for a Quality Control Inspector II position based out of our Andover, MA location and will report to our VP of Global Quality Assurance. The Quality Control Inspector II will test and inspect components and finished devices as defined by work instructions and/or engineering specifications. This role will also report non-conformances, monitor critical equipment and instrumentation to ensure proper orientation and calibration, and complete first article inspection. What you'll do: * Inspect / test production components and subassemblies in accordance with procedures, specifications and mechanical drawings. * Perform First Article Inspections. * Perform final product inspection and test. * Maintain calibration program - monitor / track critical equipment and instrumentation for all departments to ensure proper orientation and calibration, coordinate with outside calibration house, maintain records and perform in house calibrations. * Maintain and post inspection results in quality inspection database. * Assist in writing and updating inspection procedures, protocol and checklists. * Assist shipping department by receiving parts after normal hours. * Communicate with suppliers for miscellaneous quality items - i.e. material certifications, dimensional issues. * Participate in root cause analysis and report on findings. * Other duties and responsibilities as required. What we're looking for: * High School Diploma or GED * 4+ Years Relevant Experience * 4+ Years Gage calibration * 4+ Years Layout inspection using GD&T * Basic math skills. * Demonstrates clear, professional, and respectful verbal and written communication in all interactions, consistent with an inclusive work environment. * General experience working with Microsoft Word. * General experience working with Microsoft Excel. * General experience working with 3D CAD software, CMM and/or optical comparator * Mechanical aptitude. * Must have ability to effectively communicate in English including reading, writing, speaking and listening. * Technical training required in lieu of Associate Degree * Working knowledge or measuring instruments such as CNC video measuring systems, calipers, comparator, DMM, pin gages, force gage, drop indicator, surface tester, gage blocks, depth gage, durometer and thread gages. A plus, but not required: * Associate Degree * Hazardous Waste & USDOT Hazardous Materials * Power Industrial Truck * General experience working with SAP ERP Business System * Experience with power tools such as drill press Why you'll love working here: Inclusive Culture: YOU Belong at Sloan. At Sloan, we are committed to fostering an inclusive and diverse workplace where diverse backgrounds and perspectives are embraced and celebrated. We proudly offer equal employment opportunities regardless of race, color, religion, sex, sexual orientation, gender identity and expression, national origin, disability, age, genetic information, marital status, political affiliation, veteran status, or any other characteristic protected by law. Growth Opportunities: We invest in our employees' professional development with ongoing training and career advancement opportunities. Innovative Projects: Be part of exciting projects that push the boundaries of technology and have make a real difference in the world. Compensation: The compensation range for this U.S.-based position is $62,370 - $69,300 annually. Our compensation range reflects our good faith estimate of what an ideal candidate can expect, but final agreed upon compensation will always be based on the individual candidate's experience, skills, qualifications, and other job-related or market factors that may prove relevant during the hiring process. Benefits: * Comprehensive Health Coverage: Medical (including prescription coverage), Dental, and Vision Insurance, effective the first of the month following your hire date. * Health Savings Account (HSA): With company contributions for most medical plan options. * Financial Security: Basic Life, Basic Accidental Death and Dismemberment, Short-term Disability, Long-term Disability, and Accident Insurance. * Additional Protection: Optional Life, Critical Illness, Hospital Indemnity, Legal, Pet Insurance, and Identity Theft Protection. * Convenient Commuter Benefits: Save on your daily commute. * Flexible Spending Accounts: Dependent Care FSA to help manage your expenses. * Wellness Support: Employee Assistance Plan and Wellness Programs to keep you healthy and happy. * Retirement Savings: 401(k) Retirement Savings Plan with a company match and immediate vesting. * Generous Time Off: Paid Holidays, Volunteer Time Off, Paid Time Off, Sick Leave, Military Leave, Parental Leave, Bereavement Leave, and other paid or unpaid state/local leaves where required. * Work-Life Balance: Hybrid Work Program to support your flexibility. * Employee Referral Program: Earn rewards for referring great talent. * Professional Development: Tuition Reimbursement Program to help you grow your skills. * Community and Networking: Join our Employee Business Groups and connect with colleagues. We Are Proud Partners With the Chicago Cubs We are a Legacy Partner of the Chicago Cubs and we are proud to be the organization's official water efficiency partner! Through this relationship, which includes the naming rights to Sloan Park, the Cubs' Spring Training facility in Mesa, Arizona, we have had the opportunity to promote our brand and continue our water conservation efforts in the city of Chicago and around the world. JOIN AN INDUSTRY LEADER! For additional company information please visit our website at

Rennscot MFG, founded in 2017, started as a motorsports-focused shop in the aftermarket automotive industry. Now, they are a leading provider of advanced manufacturing services located in Woburn, MA. Rennscot MFG strives to be more than just a machine shop; they solve problems in innovative ways, using a suite of integrated services to fuel a passion for ideation. With a focus on diversifying into commercial and critical technology sectors, Rennscot MFG delivers cutting-edge technologies and unwavering commitment to quality. They offer a comprehensive range of services, including reverse engineering, metal & polymer additive manufacturing, and precision machining to support various industries' needs. For more information, visit rennscotmfg.com. Description The Quality Control Inspector is responsible for ensuring that manufactured components meet engineering and customer specifications through precise inspection processes. This role places a strong emphasis on visual inspections, along with manual inspection methods, and requires a keen understanding of technical drawings and GD&T. Candidates will be considered for either an L1 (entry-level) or L2 (experienced) inspector position based on experience and qualifications. Responsibilities Operate pre-programmed CMM inspections (Zeiss/Calypso preferred) Load/unload parts and verify setups Interpret CMM results and compare them against engineering requirements Document findings in the MES (ProShop) and communicate deviations Perform manual inspections using a variety of precision metrology tools Calipers, micrometers, height gauges, thread gauges, bore gauges, etc. Visual inspections for defects such as nicks, scratches, and finish inconsistencies Review technical drawings and apply GD&T principles to inspections Conduct receiving, in-process, and final inspections Assist in non-conformance investigations, root cause analysis, and corrective actions Maintain accurate inspection records and ensure compliance with AS9100/ISO9001 standards Collaborate with machinists, engineers, and quality team members to resolve inspection-related concerns Adhere to company safety protocols, including proper PPE usage (eye protection, hearing protection, etc.) Step into other support roles as needed based on company demands; assist with CNC machine operation, post-processing additively manufactured parts, mechanical assembly, or logistics tasks (e.g., driving components to/from outside processing vendors) Required Skills & Qualifications Experience in quality inspection within a manufacturing environment Strong ability to interpret technical drawings, GD&T, and work instructions Proficiency in basic metrology tools (calipers, micrometers, etc.) Familiarity with non-conformance documentation and quality reporting Attention to detail and ability to work independently in a fast-paced environment Preferred Skills & Qualifications Experience running CMM programs (Zeiss/Calypso preferred) Ability to make minor adjustments to Calypso programs Understanding of statistical process control (SPC) and quality tools (FMEA, control plans, etc.) Experience working in regulated industries (aerospace, medical, automotive, etc.) Physical Demands Standing for extended periods Lifting/moving objects up to 50 lbs Fine motor skills for handling small precision components Working in an industrial environment requiring PPE (eye protection, hearing protection, etc.) ITAR Requirement To conform to US Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a US citizen, lawful permanent resident of the US, protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the US Department of State. Learn more about the ITAR here: **************************************************************************************** Rennscot MFG is an Equal Opportunity Employer; employment with Rennscot MFG is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

We are a growing manufacturing company looking for an individual to assist or lead our quality control department Requirements A qualified individual would: Be able to read and interpret drawings. Understand GD&T. Understand a variety of sampling plans. Utilize best practice inspection methods to ensure product conforms to customer and drawing specifications. Be familiar with and able to use a variety of inspection tooling (micrometers, calipers, CMM, indicators, optical comparator, etc). Have good computer skills (Microsoft Office, Outlook, be able to learn a robust ERP system). Be familiar with completing first article inspections per AS9102 and complete utilizing specialized software. Have a good organizational skill set as each customer has a different set of requirements that are critical to product acceptance. Be familiar with the requirements of ISO9001. Attention to detail is critical. FULL TIME EMPLOYEE BENEFITS: Competitive compensation based on experience BCBS Medical, Altus Dental and Vision, Disability and Life Insurance - 100% Company Paid. Paid personal and vacation time (PTO) 10+ Paid holidays 401K plan Potential for Growth OT based on business conditions COMPANY: Bendon Gear is a precision machine and gear company doing business for over 40 years, with a stable set of excellent customers. We are a good, solid company, and we wish to build a team of good people who are motivated, flexible, and capable. Job Types: Full-time, Part-time Salary: $18.00 - $27.00 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Professional development assistance Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Salary Description $18 - 27.00 / Hr

We are seeking a Quality Control Inspector with experience in conducting first article inspection processes to ensure the quality of finished products. The ideal candidate will have some prior experience with FAI, knowledge of quality assurance techniques, and the ability to interpret engineering drawings and technical documents. Responsibilities: Assist in Conducting First Article inspection (AS9102) processes and document activities Interpret test results for acceptance or rejection Record test results and compile nonconforming output report Mechanical Inspection Electrical Point to Point wiring continuity testing Maintain calibration logs Qualifications: Minimum experience with first article inspection processes (Will Train) Knowledge of quality assurance techniques and functions Previous experience with calipers and micrometers Ability to read and interpret engineering drawings, specs, and other technical documents Mechanical aptitude Excellent communication skills both verbally and in writing

The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

Acute Care TechnologySee attached Job Description At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions Inspect measure and/or test material to established methods and standards. Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. Document inspection and test results according to established procedures. Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. Process returned material to established procedures. Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. Interface with other functions and departments as required. Required/Preferred Education and Experience High School Diploma Or equivalent. required 1-3 years experience in a related position. required Knowledge, Skills and Abilities Good written and oral communication skills. Ability to read specifications, procedures and engineering drawings. Familiar with use of mechanical and electronic test equipment. IPC-A-61OD for Incoming Inspection, preferred. Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. #LI-LV1 The hourly pay rate for this position is: $24.00 to $25.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Job Description ) PFS is seeking an experienced, enthusiastic individual to join our team as a Quality Inspector. This role is critical to ensure that PFS products meet strict quality standards at every stage of manufacturing. The Quality Inspector will conduct inspections, assist manufacturing staff with quality guidance, and support interdisciplinary teamwork to achieve efficient, compliant, and profitable results. Position Responsibilities: · Conduct 1st piece, in-process, and final inspections of prototype and production products. · Perform dimensional inspections of machined and fabricated parts, including checks for flatness, parallelism, perpendicularity, roundness, runout, and surface finish. · Verify fabricated meter quality through fit-up, parallelism, throat roundness, and overall length checks. · Use and interpret readings from micrometers, verniers, height stands, radius gauges, indicators, and other mechanical measuring instruments. · Perform nondestructive testing including VT (Visual Testing) and PT (Penetrant Testing). · Conduct PMI (Positive Material Identification), hardness testing, and saw-cut inspections for material traceability. · Maintain welder traceability records (heat numbers, weld wire, welder IDs) and ensure accuracy on NDE drawings. · Keep calibration logs, tools, and gauges current (machine shop hand tools, weld machines, hydro gauges, etc.). · Carry out final inspections of meters and welds, including dimensions, surface condition, coatings, tags, and flow direction. · Support third-party inspections (dimension verification, paint thickness checks, holiday testing, adhesion testing). · Inspect incoming materials and supplied parts (pipe roundness, thickness, length, flanges, and welded/machined items). · Conduct internal audits to maintain ISO 9001 compliance. · Assist manufacturing as needed and perform additional shop duties, including lifting up to 35 lbs. Skills & Qualifications: · Strong quality-first mindset with attention to detail and accuracy. · Team-oriented, with the ability to give constructive feedback and positive reinforcement. · Self-motivated, requiring minimal supervision. · Experience in dimensional measurement and mechanical inspection methods. · Familiarity with ANSI Y14.5 and Geometric Dimensioning & Tolerancing (GD&T). · Ability to interpret complex drawings and prepare detailed inspection reports. · Experience with inspection documentation software and SPC data collection (a plus). · Experience with VT and PT (or willingness to learn). · CMM experience (Mitutoyo Crysta with MCOSMOS software preferred) is desired but not required. · U.S. government, naval, or aerospace component inspection experience is a plus. · Must be able to meet requirements to obtain/maintain U.S. Security Clearance. Education/Experience Considerations At PFS we value and consider the quality, experience and capabilities of an individual in addition to formal education. If you are highly motivated and skilled in the areas of this position's responsibilities and qualifications, you are welcome to apply. Below is a list of preferred backgrounds. · At least 3 years of product inspection experience using handheld measurement tools and gauges. · Fabrication, machining, welding, or manufacturing floor experience (engineering or hands-on). · Familiarity with Quality Systems, Quality Assurance, and ISO 9001 standards. · ASQ certifications or experience in any quality discipline (a plus). Company DescriptionPrimary Flow Signal is a leading U.S.-based manufacturer specializing in precision-engineered flow measurement devices and venturi meters used in critical industrial applications worldwide. Our products are trusted by major utilities, power generation facilities, and process industries to accurately measure and control the flow of liquids, gases, and steam. We combine decades of experience in advanced fabrication, welding, and machining with a commitment to quality and performance. Our team designs and builds custom flow elements from carbon steel, stainless steel, Inconel, and other specialty alloys, meeting rigorous industry standards and customer specifications. At Primary Flow Signal, you'll be part of a collaborative environment where skilled machinists, welders, engineers, and technicians work together to deliver innovative solutions that improve efficiency and reliability in some of the world's most demanding environments.Company DescriptionPrimary Flow Signal is a leading U.S.-based manufacturer specializing in precision-engineered flow measurement devices and venturi meters used in critical industrial applications worldwide. Our products are trusted by major utilities, power generation facilities, and process industries to accurately measure and control the flow of liquids, gases, and steam.\r \r We combine decades of experience in advanced fabrication, welding, and machining with a commitment to quality and performance. Our team designs and builds custom flow elements from carbon steel, stainless steel, Inconel, and other specialty alloys, meeting rigorous industry standards and customer specifications.\r \r At Primary Flow Signal, you'll be part of a collaborative environment where skilled machinists, welders, engineers, and technicians work together to deliver innovative solutions that improve efficiency and reliability in some of the world's most demanding environments.

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Health insurance Resin Systems is a manufacturer of custom thermoset resin castings utilizing epoxy, urethane and silicone materials designed for highly dependable performance in hundreds of demanding applications and environments. Resin Systems creates components for a wide range of industries including Semiconductor, RF Microwave and Medical. Resin Systems Corporation is looking for talented individuals to support our continued growth. We have 1st shift positions available in our QC inspection department. Quality Inspector Responsibilities: - Conduct dimensional inspections on incoming materials, in-process production, and finished products from the various product lines as assigned by supervisor/management. - Use various measuring tools and equipment such as calipers, thread gages, pins and height gages to ensure product specifications are met - Perform visual inspections to identify any cosmetic defects or non-conformities - Perform cosmetic rework on identified minor cosmetic defects - Document and report inspection results and maintain accurate records - Follow established quality control (QC) procedures and guidelines Quality Inspector Skills: - Strong knowledge of quality control principles and practices - Proficiency in using measuring tools and equipment - Attention to detail and ability to identify defects or non-conformities - Excellent analytical and problem-solving skills - Familiarity with QC (Quality Control) processes - Ability to read and interpret technical drawings and specifications - Positive attitude and strong communication skills to collaborate with cross-functional teams - Must be willing to take initiative and be a self-starter Please note that this is not an exhaustive list of responsibilities and skills. Other duties may be assigned as needed by supervisor/management based on business requirements. Job Type: Full-time 8 hour shift Day shift Monday to Friday One location Ability to lift 50 lbs

Job Title: Quality Inspector (1st & 2nd Shift) Department: Manufacturing / Quality Job Type: Full-Time / Temp to Hire Shifts Available: 1st and 2nd Shift Schedule: Monday through Thursday Shift Times: 6:00AM - 4:00PM (1st) / 4:00PM - 2:00AM (2nd) Pay Rate: $18.50/HR Job Summary We are hiring dependable and detail-oriented Quality Inspectors to join our team. In this role, you will be responsible for inspecting materials and finished products to ensure they meet quality standards and customer specifications before moving forward in production or shipment. Key Responsibilities Inspect raw materials, in-process parts, and completed products. Use measuring tools such as calipers, micrometers, and gauges. Identify defects and report non-conforming materials to supervisors. Document inspection results accurately and maintain records. Follow company quality standards and inspection procedures. Collaborate with production and quality teams to resolve issues. Keep inspection work area clean, safe, and organized. Requirements High School Diploma or GED required. Previous experience in quality inspection or manufacturing preferred. Ability to read and interpret blueprints/specifications (a plus). Strong attention to detail and organizational skills. Basic math and computer skills. Ability to stand for long periods and lift up to 30 lbs. If you are interested in this position or others available, please apply below or call our office at (603) ###-####. Pay Details: $18.00 to $20.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required. Monday through Friday: 9:00AM - 5:00PM. Includes a 1-hour unpaid lunch break. 35 Hours per week.

DEKA R&D has an immediate opening for a Quality Control Inspector to work in a dynamic Medical Device Research and Development company. This position is a highly visible role with significant and direct impact on the development and success of multiple engineering projects. Responsibilities as a Quality Control Inspector: Interpret Mechanical and Electrical print reading and apply inspection best practices Operate CMM equipment and utilize various measuring tools for inspection of medical device components Communicate effectively and promptly across multiple projects to provide feedback on inspection of parts Inspect various mechanical and electrical components and assemblies through incoming inspection Interpret ASME Y14.5 and GD&T standards throughout the inspection process for compliance and best practices Provide feedback on inspection activities to improve efficient whether individually or in a cross-functional setting To be successful as a Quality Control Inspector, you will need the following qualifications: 3+ years of experience in a regulated industry CMM programming, Metrology and/or CQI certified is a plus Basic GD&T knowledge required, Advanced GD&T knowledge preferred Proficient with mechanical measuring equipment such as micrometers, calipers, optical comparator Ability to operate CMMs following precise instructions Inspection of soldered components and Printed Circuit Board (PCB) assemblies; IPC-A-610 certification preferred Computer skills and knowledge; ability to learn new software (Experience with Jira is a plus) About DEKA: One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research & Development, where we are taking the same innovation and cutting-edge technology into the modern age. Behind DEKA's brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored.

Salary Range:$45,000.00 To $55,000.00 Annually Summary of Primary Responsibilities: The QC Incoming Inspector completes all activities required to approve raw materials for use in product manufacture. The position also performs inspection activities during in-process manufacturing. Specific Responsibilities: * Perform quality line clears and in process inspections during the inspection and packing processes according to specific SOP requirements * Issue lot numbers and control labels for incoming raw materials; perform inspections per internal procedures and specifications * Release approved raw materials for use in manufacturing process to include completion of associated documents, notice of approval form (bin card) and relabeling of inventory * Review MPS of other incoming inspectors for approval and release. * Monitor and perform annual retain inspection; coordinate required retesting with QC; complete required documentation * Perform OOS investigations and participate in MRB as required for rejected materials * Perform as SME for the function and provide training as required to new employees, contractors and other QA personnel * Perform biennial review for designated procedures and MPS as needed * Documents; author and complete DCR as required * Document all work activities according to Good Documentation Practices * Maintain current training on all assigned procedures to include read & understood, skills development and classroom training activities as required * Participate in other projects as assigned Job Complexity: The position works on assignments that are routine in nature and receives detailed instruction on all work. Supervisory Responsibilities: None Required Qualifications: * Associates degree in the life science or relevant work experience * 0 - 1 year of experience in a cGMP facility or previous experience in a QA/QC role within the industry; internship experience considered * Experience using Microsoft Office or an ERP system Desired Experience, Knowledge, and Skills: * Bachelor's degree preferred * Experience working in a clean room environment * Excellent communication and documentation skills The salary range provided is based on the Company's reasonable estimate of the base salary pay range for this position at the time of posting. Actual base pay is determined by several factors relevant to the position, including skills, competencies, experience, education, and geographic location. Anika also offers a discretionary bonus program for all full-time employees, comprehensive healthcare benefits, health savings account, 401(k) plan with up to 5% company match which includes immediate vesting, employee stock purchase plan at a 15% discount, accrued paid time off, additional long-term incentives including stock awards, and much more. At Anika, we take pride in offering robust Total Rewards, inclusive of market-leading benefits to meet our employees where they are in their career and in life. The compensation and benefits information is provided as of the date of this posting. Anika reserves the right to modify compensation and benefits at any time, subject to applicable law. submit your resume We are an equal opportunity employer, and we do not tolerate discrimination based on characteristics such as age, gender, gender identity and expression, genetic status, sexual orientation, race, ethnicity, national origin, religion, disability, military status, family status, or any other protected category under federal, state, or local law.

Were seeking a Quality Mechanical Inspector to perform detailed, accurate mechanical inspections-including FAIs, Gage R&R, OQ, PQ, and IQ-to strict drawing requirements and established quality standards. This role is highly detail-oriented and requires precision, hands-on metrology experience, and the ability to document results clearly. Youll work with CMM (Hexagon PC-DMIS), optical comparator, OGP, and traditional inspection tools (calipers, micrometers, height gages, pin gages, tool mics), and complete visual inspections to established standards. Key Responsibilities Perform dimensional and visual inspections using CMM, optical comparator, calipers, micrometers, height gages, and other metrology tools. Accurately document inspection results per company inspection procedures (e.g., TechNH standards if applicable). Write basic CMM programs to measure parts for FAIs, CPKs, PQs, OQs, and IQs. Conduct FAIs and Gage R&R, as well as PQ, OQ, and IQ inspections. Utilize standardized CMM fixturing based on part geometry. Interpret ballooned customer drawings with a basic understanding of GD&T. Maintain an accurate library of programs and written setup instructions for all CMM and OGP programs. Qualifications Required: Minimum 1 year experience as a mechanical inspector. Minimum 1 year CMM experience; ability to create basic CMM programs (Hexagon PC-DMIS knowledge required). Proficiency with optical comparators, tool mics, pin gages, and related tools. Basic understanding of GD&T measurements. Proficient in Microsoft Excel and MS Office. Ability to read blueprints, inspection reports, and quality documentation. Strong communication skills; ability to work independently with minimal supervision and collaborate with engineers, shift supervisors, and machine technicians. Demonstrated ability to work effectively in a multi-discipline, collaborative environment. Experience in QMS/Regulatory environments. Preferred: Experience writing basic programs for OGP systems. Familiarity with CPK studies and data reporting. Strong presentation and reporting skills. What Youll Bring High attention to detail and a commitment to accuracy. Ability to take direction well and carry out instructions competently. A team-first mindset and clear, professional communication.