Inspector jobs in Chico, CA

COMPANY INFORMATION: MatriScope Engineering Laboratories, Inc. (MatriScope) is a leader in providing professional services in the disciplines of Geotechnical and Environmental Engineering, Materials Testing, and Special Inspection Services. Over the past 20 years, MatriScope has built a strong reputation throughout Northern and Central California for providing exceptional service through a proactive project management approach, innovative practices and a commitment to maintaining its traditional values. MatriScope is headquartered in Sacramento, CA with additional offices in the Bay Area. MatriScope has many long-term assignments, including prevailing wage projects, for the right candidates who have a proven track-record, strong work-ethic, and desire to participate as a team player. MatriScope offers competitive salary and benefit package. POSITION OVERVIEW: Must be currently certified by the American Welding Society (AWS) as a Certified Welding Inspector (CWI). Previous inspection experience is required for this position. PRIMARY POSITION RESPONSIBILITIES: Perform as an entry to lead inspector on various projects responsible for the inspection and documentation of construction and the ability to properly interpret construction documents and prepare well-written and concise reports capturing all necessary elements is required. Must be able to properly follow directions, perform in a responsible manner with minimal oversight. Provide daily reports of observation and test results Monitor work procedures for compliance with project specifications Interact with client representative (supervisors, foremen, project managers, engineers, etc.) at project sites Perform analysis or calculations to check accuracy, applicability and reasonableness of testing data REQUIREMENTS: Entry or senior level Special Inspector with current certifications by the International Code Council, and American Welding Society. One (1) year of Special Inspector field experience. Ability to read and comprehend basic plans and specifications. Strong written and verbal communication skills and the ability to work with a team. Reliability - must be able to arrive at designated project sites prior to scheduled times Ability to prepare reports and documentation. Proficiency computer skills required. Ability and willingness to travel and work at construction sites. Ability to lift up to 50 pounds Ability to walk on uneven ground and work in variable outside conditions. Must be able to work various shifts depending upon construction schedules Must have a satisfactory driving record in accordance with the Company's driving (MVR) policy. Comply with the Company's auto insurance policy and must have a valid CA drive license. CERTIFICATIONS NEEDED: AWS Certified Welding Inspector (CWI)

Quality Control Inspector Needed in Camarillo Direct Hire Industry: BioTech, Pharmaceuticals Pay range: $23 - $24/hour Monday - Friday 7am - 3:30pm Must Have * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Job Summary Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Essential Functions * Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; * Conduct inspection and testing related to: ► Incoming product. ► First article. ► In-process. ► Final. * Initiate nonconformance reports (NCR). * Performs all aspects of testing related to manufacturing. o Incoming inspections o In-process inspection. o Final Inspection release of finished goods. o Document review. o Supports cross functional departments investigate potential non-conformance's observed * Ensures that all inspections and procedures are properly completed and documented. * Perform pre and post-inspection of product gamma irradiation process. * Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. * Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations * Prepare and submit Metrics reports to the quality supervisor or QC lead * Comply with all safety requirements ensuring work areas meet standards. * May be required to report to multiple facilities within a 2-mile radius. * Job Order document review and release * Other duties as assigned Education * High School Diploma or equivalent with 2 years of experience in quality control inspections. Required Experience & Competencies * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. * Solid organizational and planning skills required. * Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. * Must be able to work effectively and efficiently in a team environment. * Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. * Must display personal accountability for results and integrity. * Must display eagerness to learn and continuously improve. * Must have uncompromising dedication to quality. * Good general mathematical skills. * General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges * General computer skills. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Fenagh Engineering and Testing is seeking a CWI Inspector with NDT to perform inspections for the shop/field. To include the following: audits, inspecting structural steel fabrication and erection, material identification, welding to include joint fit-up, in-process welding, completed welding, MT & UT as required by code, and high-strength bolting inspections. Ideally this candidate will be an AWS CWI with either their Level I or Level II UT/MT certification from an ASNT Level III. Evaluation from our Level III for both UT (shear wave)/MT will be conducted upon hiring. The position will be supporting clients in the Los Angeles area. ICC / CWI / NDT - MT & UT Level II General Responsibilities: Perform observation and inspection in the shop & field. Collect MTR's for heat numbers and tracking. VT on members in progress. UT CJP's as needed. MT Fillet Welds as needed. High-strength bolting inspections & tests. Compile daily reports outlining inspections and reporting deficiencies (if any). Read and understand specific project plans and specifications. Communicate with project team regarding project requirements and inspection results. Requirements: AWS CWI Certification Level I or Level II UT (Shear wave). Level I or Level II MT. ICC Structural Steel & Bolting. Minimum 5 years of experience. High School Diploma or equivalent. General computer knowledge (Excel, Word, PDF). Able to travel to various locations. Benefits include company paid holidays, sick days, 2 weeks paid vacation, 100% health insurance premium, matching 401k plan. Salary is negotiable according to experience. We have a great culture defined as: Detail-oriented -- quality and precision-focused. Innovative -- innovative and risk-taking. Outcome-oriented -- results-focused with strong performance culture.

VST Engineering is a Bay Area-based civil engineering firm breaking the mold of traditional infrastructure consulting. We specialize in complex, multi-disciplinary capital projects with a focus on transportation, rail, and transit. As a certified DBE/MBE/SBE, we bring innovative design solutions and a people-first approach to every project. Our team of experienced engineers provides full-service support-from concept to construction-across civil, rail, systems, structures, and traffic design. We've contributed to some of the most transformative public infrastructure projects in California and beyond, partnering with public agencies, primes, and program managers to deliver high-quality, community-centered outcomes. At VST, reliability, collaboration, and technical excellence define how we show up. Our mission is simple: deliver impactful infrastructure while building a company where people love to work. We have an immediate position for a full time Inspector supporting our San Jose, California transit team. The Inspector should have experience on repair and improvement of facilities, maintenance, rehabilitation and tenant improvement. The Inspector is responsible for overseeing and verifying the compliance of contracted projects and services. This role often involves a combination of fieldwork and administrative duties to ensure all aspects of a contract are fulfilled satisfactorily. From initial review to final inspection, the Inspector ensures that contractual conditions are met in terms of quality, safety, and performance. Responsibilities & Duties: Review and analyze contract specifications and requirements Conduct site inspections to ensure work meets contract terms Document and report on project progress and adherence to contract Identify and report any discrepancies or non-compliance issues Coordinate with contractors and project managers to resolve issues Ensure all safety and regulatory standards are met Prepare detailed inspection reports and documentation Verify that materials and equipment comply with the contract requirements Attend project meetings to discuss contract-related matters Assist in the review and approval of contractor invoices and payments

Electrical Inspector - Full-Time (San Francisco Bay Area) 3Vi, Inc. is an engineering practice and general contractor headquartered in San Ramon, California. We specialize in delivering high-quality rail and transit projects for our clients. Role Description We are seeking a full-time Electrical Inspector to support construction projects throughout the San Francisco Bay Area. Responsibilities Conduct daily inspections of electrical installations, including medium-voltage systems, traction power, low-voltage systems, communications, fiber optics, traffic monitoring systems, highway lighting, and traffic signals. Review construction drawings, specifications, and submittals for compliance and constructability. Identify and escalate scope changes, contract modifications, and potential conflicts to the Project Manager/Resident Engineer. Respond to and resolve field construction issues; coordinate with contractors and project teams to ensure quality and compliance. Prepare detailed daily reports on contractor progress and document any nonconformance issues. Review RFIs and change requests from contractors and provide technical analysis and recommendations. Support project closeout procedures, including punch lists, testing, and documentation. Uphold workplace safety and comply with client health, safety, and anti-harassment policies. Provide availability for night shifts as needed. Perform additional duties as required to support business needs. Minimum Qualifications Minimum of 10 years' experience in construction inspection on public works projects. Minimum High School Diploma required. Degree in engineering or construction management would be a plus. NETA Level 2 certification or higher. Proficient in interpreting and applying relevant codes, standards, and materials. Must be authorized to work in the United States. Valid California driver's license. Strong proficiency in reading and writing in English. Preferred Qualifications Roadway construction inspection experience on highway or public works projects. Familiarity with Caltrans and other local transit agency procedures. Engineering or construction management degree, credentials, or certifications Compensation and Benefits 3Vi provides a comprehensive suite of benefits, including medical, dental, vision, disability, life insurance, and retirement savings. Rate: $85-95 per hour plus benefits Rate depends on experience. A higher rate may be available to candidates with a Professional Engineer (PE) license, a degree in engineering or construction management, or additional certifications. Equal Opportunity Employer Statement 3Vi, Inc. is proud to be an Equal Opportunity Employer. We value diversity and are committed to fostering an inclusive, respectful workplace where individuals of all backgrounds, identities, and experiences can thrive. We do not discriminate on the basis of race, religion, color, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected status under applicable laws. All qualified applicants are encouraged to apply. W2 Only (CTC and 1099 not available for this role)

D'Leon Consulting Engineers is seeking a Construction Inspector in Los Angeles, CA. Responsibilities Perform inspection of runway and taxiway construction activities including FAA P-501 PCCP slip form and side form paving operations, ensuring compliance with specialized concrete paving equipment practices, vibration setup, paver speed, screed inspection, finishing, and surface treatment requirements. Conduct comprehensive inspections of FAA P-401 asphalt placement and compaction activities, including air-void testing, surface defect repair, release agent application, and cold milling, patching, profiling, and grade correction operations. Inspect installation and testing of FAA P-201 base material and P-306 lean concrete base systems, including earthwork operations, soil import/export activities, subgrade preparation, and temporary erosion and drainage control setup and compliance. Apply extensive knowledge of FAA active airfield work rules and protocols, including barricades, fencing, lighting, signage, pavement markings, FAA 7460 compliance, and vehicle service road requirements for both reflective and non-reflective runway/taxiway signage systems. Ensure compliance with FOD controls and active airfield protocols, including dust control, sweeping procedures, airport security and escorting protocols, and FAA vehicle marking/identification requirements across all operational areas. Inspect FAA airfield lighting systems including taxiway edge, centerline, TDZ, hold bar, and status lights, ensuring proper series circuits and regulator functionality throughout all installation phases. Coordinate opening and closing of active runways and taxiways using proper radio protocol and multi-group coordination procedures, maintaining operational safety and efficiency standards. Prepare detailed daily inspection reports with comprehensive mapping, video/photo documentation, and accurate quantity tracking that clearly documents construction activities, deficiencies, and compliance issues in a timely manner. Perform batch plant inspections for both PCCP and asphalt materials, interpret complex underground utility plans, read survey data, and perform calculations for inspection and quantity verification including line and grade requirements. Apply knowledge of project sustainability requirements and enforce LAWA's mandatory MMRP requirements while maintaining availability for all shifts including nights and weekends as operational demands require. Qualifications High school diploma (or equivalent) Current City of Los Angeles Deputy Inspector Licenses; Grading, Concrete, desired. 30-hour Cal-OSHA training prior to assignment. The 30-hour training will have been received within the last 4 years Computer Proficiency - Utilize electronic equipment to review project plans and contract documents including RFIs, submittals, and change orders. Working and operational knowledge of Project Management Information Systems (PMIS) used for inspection reporting and document control. Microsoft Office, Microsoft Outlook, Adobe Pro, PM Web, Bluebeam, ProCore, etc.. D'Leon Consulting Engineers is an equal opportunity employer committed to fostering an inclusive and respectful workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

Job Posting Start Date 12-12-2025 Job Posting End Date 02-27-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Production Manager, Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview Under the direction of the Task Order Manager, the Quality Control Inspector is responsible for conducting inspections to ensure compliance with contract requirements and Quality Control and Safety Plans. Pay Rate: $26.74/hourly Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Review all site work to verify compliance in accordance with applicable plans and procedures. * Inspect and diagnose problems to determine corrective actions/repairs. * Inspect work in progress and finished work for discrepancies in accordance with the QC and applicable Safety Plans, and contract requirements.Complete necessary inspection reports and documentation required to support findings. * Assist in preparing Safety incident and hazard reports as required. * Maintains accurate administrative records. * Review all site work to verify compliance in accordance with applicable plans and procedures. * Respond to emergency site maintenance as required. * Ensures proper housekeeping practices are strictly observed. * Maintain open communications with personnel. * Performs other duties as assigned by the supervisor. * Other duties as assigned. Accountable For: * Tools and equipment within his or her possession. * Using PPE when required. * Timely completion and accuracy of all work. * Working closely and harmoniously with fellow workers. * Adherence to all Safety rules and regulations. Job Requirements Mandatory: * Working knowledge of Microsoft Programs, including but not limited to: Outlook, Word, PowerPoint, and Excel or equivalent software program. * Understanding of Government contracts, correspondence, reports, and records. * Knowledge of generally accepted standards of workmanship in custodial services. * Excellent communication skills, both oral and written. * Excellent organizational skills. * Mature judgment and ability to work with little or no supervision. * Ability to communicate ideas effectively with personnel at all levels. * United States Citizen. * High School Diploma or Equivalent. * Ability to pass pre-employment background check and drug screen. * Must be able to read, write, and speak English fluently. * Valid driver's license with excellent driving record (Must provide current driving record). * Ability to obtain access to U.S. Government Installations through the Defense Biometric Identification System (DBIDS). Preferred: * 2 yrs custodial experience. * Two-year degree in Safety, Industrial Hygiene, or a related field or broad experience in the same or similar areas. * Bilingual - Spanish Working Conditions: * Work is performed indoors and outdoors. Outdoor work is subject to temperature extremes and inclement weather conditions. * Work hours are subject to change, with overtime, weekend and/or holiday work as needed. * Subject to hazards that may cause personal bodily harm; diseases, cuts, bruises, burns, common cold, influenza, dust odors and elevated noise levels. * Tasks may be performed on uneven, inclined, hard and soft carpeted floors, cement structures and surfaces. * While performing duties of this job, the employee is occasionally required to stand and/or walk for long periods of time, sit, use of hands and fingers, handle, or feel objects, tools or controls, reach with hands and arms, climb stairs, climb ladders, balance, stoop, kneel, crouch or crawl, talk, hear, or smell. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by the job include close vision. May be required to operate regular and specialized vehicles. Physical Requirements: * Must be able to lift to 50 lbs. * Must be able to climb stairs and ladders as required. * Must be able to load/unload materials, tools, and equipment. * Involves walking, bending, stooping, twisting, and reaching. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

ABOUT US 4LEAF, Inc. (4LEAF) is a multi-discipline Firm providing services throughout the United States. For more than 20 years, 4LEAF has assisted clients in successfully navigating contract services leading to fiscally responsible solutions. As one of the industrys notable providers of planning, building and safety, construction management, and fire consulting services, 4LEAF has an enviable track record of completing complex projects and staffing assignments with both public and private clients. The dedication of our staff combined with our company culture have consistently allowed us to meet and exceed the needs of our clients. Job Description: 4LEAF is seeking qualified building inspectors in or near Chico, CA. Candidates must be qualified to perform technical building inspections to enforce compliance with building codes, regulations, and ordinances. Three to five years as a Building Inspector is preferred. Must be certified through ICC, DSA, OSHPD and CASp certifications are highly desired. Key Duties: Inspection of new buildings, additions to, and alterations of existing buildings for compliance with the currently adopted editions of the International Building Code; Articulate complex building issues to the public, contractors, designers, and owners, with an emphasis on building regulations pertaining to life/safety issues; Identify and solve complex problems by conferring and providing information to developers, engineers, architects, property owners, contractors, and others regarding code requirements and alternatives; Field questions regarding building requirements; Make independent analysis during the inspection process; Advise Planning, Engineering and/or Code Enforcement personnel regarding building-related issues; The ability to read and interpret various codes and to apply good judgment in the enforcement of same; Write clear and complete correction notices and inspection reports and to perform other, related tasks as assigned; Analyze, interpret, and accurately check building plans, specifications and building codes; Enforce codes with good judgment and impartiality; Apply technical knowledge of building trades; Performs duties within OSHA standards. Requirements: Qualifications: Must have 3 - 5 years of experience working as a Building Inspector, Must be certified through ICC, DSA, OSHPD and CASp certifications are highly desired. Proven knowledge of Federal, State, and local laws, codes and ordinances relating to building construction, including State Energy and Accessibility regulations. Understanding of the accepted safety standards, testing procedures and methods of construction. Principles and techniques of building inspection work. Basic understanding of the plan checking process. Computer knowledge and skills are desirable. Candidates must: Maintain a healthy working relationship with contractors, builders, and the public; Must have excellent customer service skills including, good listening and negotiating skills; Must have excellent written and verbal communication skills; Must be able to kneel, crouch, and climb tall ladders; Must have a valid California State drivers license. 4LEAF anticipates paying $31.15 to $42.84 per hour commensurate with experience and skillset. Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Part-Time Weekends as needed License/Certification: California Driver's License (Preferred) Work Location: On the road PI5848b9***********1-38060132

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR an I9sJ4JOc

Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Duties & Responsibilities: * Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards * working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part * may evaluate new procedures for non-standard rest and perform special set-up on new equipment * assist others in correcting or preventing deficiencies in quality or workmanship * give work direction to other inspectors * know your customers expectations and drive action to meet them * perform first article process * identify component * perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality Required skill: PCBA Experienced Able to use measurement equipment. Must be able to read ECO/Dev instruction/build drawer and BOM. Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: * Attention to detail * Communication skills - verbal and written * Organizing * Judgement * Data collection, management and analysis * Team work * Ability to interpret complex customer rules and regulations * Demonstrated skills in project management and ability to train others to lead projects * Works well independently * Excellent interpersonal and communication skills * Ability to mange time and prioritize multiple task in a fast paced environment * Proficient in use of MS Office applications, MS Project, Outlook * May require international travel and international business experience * Knowledge of Lean manufacturing fundamentals

Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.

The Quality Control Inspector (QA/QC) is responsible for implementing quality control and safety plans to ensure compliance with contract specifications, applicable regulations, and company standards. This position inspects all phases of goods, services, and operations to verify conformity with established quality health, and safety requirements. The Quality Control Inspector (QA/QC) performs ongoing inspections to ensure all work meets contractual provisions, confirms that services listed on the performance requirement summary are completed in satisfactory manner, and determines areas to be inspected- both scheduled and unscheduled- as well as the frequency of inspections. This position requires communicating deficiencies to appropriate personnel, maintaining Quality Control files, and documenting the results of inspections. Performs all other position -related duties and assigned or requested. A valid Class A Commercial Driver's License (CDL-A) is required for this position to meet the scope of contract operations. Minimum Requirements High School graduate or equivalent. Must be able to speak, read, write, and understand English. Able to operate and inspect machines or equipment to diagnose defects and submit a request for replacement parts. Dismantles and reassembles equipment, using hoists and hand tools. Examine parts for damage or excessive wear, using micrometers and gauges. Identify defective engines and subassemblies, such as transmissions, and tests overhauled equipment to ensure operating efficiency. Performs scheduled and unscheduled maintenance, repairs, and adjustments of all heavy machinery to ensure the equipment remains fully mission capable for mission support. Performs a variety of collateral duties such as handling, containment, clean-up and disposal of hazardous waste, etc. Operates all heavy equipment and forklifts up to and including 50,000 pounds lift capacity, and a variety of other equipment to trouble shoot faults and validate repairs. Understands and uses safety items and personal protective equipment (PPE) that is mandatory and actively supports the EHS safety program. Required to walk, stand, sit, and move about the property for long periods of time. Required to perform physical activities that require considerable use of the arms and legs and moving the entire body, such as climbing, lifting, balancing, stooping to handle materials. Work in a noise level can range from minimal to intense. Able to lift and/or move up to 50 pounds. Possess a Valid California Commercial Drivers' License (CDL). Must be a US Citizen or able to work in the US. PD Systems is an equal opportunity employer and prohibits discrimination and harassment of any kind. Employment decisions at PD Systems are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Under Quality supervision, evaluates materials and products to ensure conformance to drawing requirements, procurement specifications and approved procedures. Evaluations include dimensional, functional, cosmetic and documentation as required per applicable inspection plan. Essential Duties and Responsibilities * Perform Quality Control inspections, as required per ATEC procedures * Read, understand, and interpret engineering (blueprint) drawings and associated GD&T (Geometric Dimension & Tolerances) * Perform mechanical, visual and functional inspection. Utilization of Micro-Vu or similar lighting inspection systems preferred * Engage with respective department members to maintain best inspection practices, foster a cooperative work environment, propose improvements when inefficiencies are observed * Generate, complete, and maintain quality documentation such as inspection records, non-conformance reports, deviation, and scrap forms * Process non-conforming materials following established procedures, able to identify and segregate non-conforming materials, transact as required in the company ERP (SAP) * Perform transactions in ERP system, as necessary to release product from Inspection * Read and conform to all company policies and procedures * Perform documentation evaluations * Interface with other departments including, Purchasing, Shipping, Receiving, Manufacturing, and Engineering as well as Supplier representatives * Assist auditors during internal audits * Other duties as assigned

ABOUT US 4LEAF, Inc. (4LEAF) is a multi-discipline Firm providing services throughout the United States. For more than 20 years, 4LEAF has assisted clients in successfully navigating contract services leading to fiscally responsible solutions. As one of the industry's notable providers of planning, building and safety, construction management, and fire consulting services, 4LEAF has an enviable track record of completing complex projects and staffing assignments with both public and private clients. The dedication of our staff combined with our company culture have consistently allowed us to meet and exceed the needs of our clients. Job Description: 4LEAF is seeking qualified building inspectors in or near Chico, CA. Candidates must be qualified to perform technical building inspections to enforce compliance with building codes, regulations, and ordinances. Three to five years as a Building Inspector is preferred. Must be certified through ICC, DSA, OSHPD and CASp certifications are highly desired. Key Duties: Inspection of new buildings, additions to, and alterations of existing buildings for compliance with the currently adopted editions of the International Building Code; Articulate complex building issues to the public, contractors, designers, and owners, with an emphasis on building regulations pertaining to life/safety issues; Identify and solve complex problems by conferring and providing information to developers, engineers, architects, property owners, contractors, and others regarding code requirements and alternatives; Field questions regarding building requirements; Make independent analysis during the inspection process; Advise Planning, Engineering and/or Code Enforcement personnel regarding building-related issues; The ability to read and interpret various codes and to apply good judgment in the enforcement of same; Write clear and complete correction notices and inspection reports and to perform other, related tasks as assigned; Analyze, interpret, and accurately check building plans, specifications and building codes; Enforce codes with good judgment and impartiality; Apply technical knowledge of building trades; Performs duties within OSHA standards. Requirements Qualifications: Must have 3 - 5 years of experience working as a Building Inspector, Must be certified through ICC, DSA, OSHPD and CASp certifications are highly desired. Proven knowledge of Federal, State, and local laws, codes and ordinances relating to building construction, including State Energy and Accessibility regulations. Understanding of the accepted safety standards, testing procedures and methods of construction. Principles and techniques of building inspection work. Basic understanding of the plan checking process. Computer knowledge and skills are desirable. Candidates must: Maintain a healthy working relationship with contractors, builders, and the public; Must have excellent customer service skills including, good listening and negotiating skills; Must have excellent written and verbal communication skills; Must be able to kneel, crouch, and climb tall ladders; Must have a valid California State driver's license. 4LEAF anticipates paying $31.15 to $42.84 per hour commensurate with experience and skillset. Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Part-Time Weekends as needed License/Certification: California Driver's License (Preferred) Work Location: On the road Salary Description $31.15 to $42.84

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

GLAUKOS - QUALITY CONTROL INSPECTOR I - 1st SHIFT (SAN CLEMENTE, CA) How will you make an impact? The Quality Control Inspector I will be responsible for all aspects of inspection (receiving, in-process and final). In addition, this position will provide QSR support for other QA activities such as calibration, environmental monitoring, product testing, label control, etc. What will you do? Receiving Inspection Receiving inspection of components following procedures, specifications and drawings. Utilize a variety of standard metrology equipment, including: Optical comparator, height gauge, master height gauge, CMM, Vision Metrology System (VMS, e.g., Smartscope), calipers, micrometers, surface table, gauge blocks, pin gauges, dial indicators, durometer, measuring microscope, hardness testers, pull force testers, surface roughness testers, etc. Read engineering drawings and interpret geometric dimensioning and tolerancing. Review associated paperwork, complete inspection records using good documentation practices, and release components. Program the Smartscope to run automatic routines for multiple part inspections. (Level 2 and higher) Write clear and concise procedures for inspection of components, machined tubing, etc. (Level 2 and higher) Carefully handle and process extremely small components without damaging them. In-Process Inspection Perform Line Clearance for Operations activities Inspect and release labeling Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform inspections on components and assemblies in manufacturing Final Inspection Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform final inspection on finished goods Inspect finished goods for proper labels, packaging, tamper seals and product in accordance with procedures. Coordinate final inspection activities with outside vendors, i,e, LAL, peel testing Perform in-house peel testing on sealed packages Maintain sample retain area Other Duties Work with engineering in the design of high quality inspection / metrology fixtures. Support equipment and process validation activities by inspecting process outputs Conduct periodic compliance audits of manufacturing operations and procedures for cGMP compliance. Ensures on a daily basis quality records and company practices are compliant with internal procedures and regulations. Coordinate the monthly environmental monitoring of the cleanrooms. Coordinate quarterly dose audits. How will you get here? High School Diploma required. 0-2 years industry experience. Knowledge, Skills, and Abilities Medical device experience and working knowledge of QSR a must Experience working in a clean room and/or performing in-process assembly and manufacturing verification inspections desirable Attention to detail and accuracy a must Must have excellent documentation skills Team player, good written/oral communicator Must be organized and able to coordinate activities with outside vendors #GKOSUS

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.