Inspector jobs in Clarkstown, NY

Join Mercury and become part of our world-class Quality team that supports the American warfighter on the battlefield, saving lives and defending democracy worldwide. As a quality inspector, you will ensure that our products deliver flawlessly every time, in the heat of battle giving our troops the winning edge when it matters most. You will be utilizing the requirements of IPC Industry Standards to ensure that the quality of our products meets the high demand of our end users. You will ensure optimal product quality by performing in-process visual verification of electronic assemblies, providing real-time feedback to operators, and documenting discrepancies accordingly. Job Responsibilities: * Supporting Incoming, in-process and final inspection including customer source inspections * Obtaining and upholding IPC credentials required of the position. * Ensuring quality at a production line level by incorporating spot-inspection, sampling, and 1st-piece verification and 100% inspection as required. * Verifying compliance of in-process material against Customer and Industry Standards * Ensuring documentation is accurately recorded and collected. * Escalating systemic issues to Quality and Manufacturing Engineering * Supporting first-piece verification runs with accompanying documents. * Documenting non-conformities to the process and specifications * Initiating regular quality line-audits to ensure all documentation, consumables, and tooling are within check. * Advocating proper ESD, PPE, and FOD prevention Required Qualifications: * Typically requires 3+ years of experience in quality assurance of electro-mechanical inspection in a manufacturing environment * J-STD-001 Class 3 and/or IPC 610 certified * Physically able to spend up to 8 hours a day using a microscope * Familiarity with IPC Industry Standards * High-School Diploma Preferred Qualifications: * Experience working in an ISO-9001 and/or AS9100 Quality System environment * Operating appropriate inspection equipment; (AOI, XRAY, etc.…) * Ability to communicate openly and effectively to provide real-time feedback * Ability to work in a fast-paced team environment * Customer-Focused, "Zero-Defect" Mindset * Documentation Abilities * Computer literacy * Industry-Relevant Quality Inspection or Control experience * Willingness to cross train in multiple Quality areas This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government. Why should you join Mercury Systems? Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit mrcy.com Our Culture We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions. To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status. As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance. ************** Click here read about our recent press release.

We are seeking a detail-oriented and experienced Quality Inspector to join our team at our custom rubber manufacturing facility. The ideal candidate will be responsible for ensuring that products meet specified quality and reliability standards through inspections, measurements, and testing. This role requires a solid understanding of mechanical drawings, measurement tools, and quality control processes. -Salary range- $22.00per hour- $25.00 per hour -Benefits: 401(k) Aflac Dental insurance/ Vision insurance Health insurance reimbursement Life insurance Paid time off -Full Time- 8am to 4:30pm, Monday-Friday Responsibilities Interpret engineering drawings, schematic diagrams, and technical documentation to determine quality and reliability standards. Collaborate with management and engineering teams to address quality concerns and establish inspection criteria. Compile and evaluate statistical data to monitor and maintain product quality and consistency. Conduct in-process and final inspections of rubber products using precision measuring instruments (e.g., calipers, micrometers). Document inspection results, report non-conformances, and assist in root cause analysis and corrective actions. Validate data or flag deviations from standards through reports and quality documentation. Maintain accurate records of inspections and test results. Ensure compliance with company and industry quality standards and safety regulations. Qualifications Qualifications: High school diploma or equivalent required; additional technical training or certifications in quality inspection preferred. Minimum 2 years of experience in a manufacturing or quality inspection role, preferably in the rubber industry. Ability to read and interpret mechanical and engineering drawings. Proficient with measuring tools such as calipers, micrometers, and other gauges. Strong math and analytical skills. Computer literate: familiarity with MS Office and quality management systems is a plus. Excellent attention to detail, communication, and documentation skills. Ability to work independently and in a team environment. Physical Requirements: Must be able to stand for extended periods and lift up to 50 lbs. Manual dexterity for operating measurement tools. Ability to work in a manufacturing environment with exposure to noise, machinery, and rubber materials. Company Website *********************************

Job Title: Civil Inspector About the Role We are looking for an experienced Civil Inspector to join our team and ensure quality and compliance across civil infrastructure projects. This position offers the opportunity to work on diverse projects, including roadway and structural construction, soil and slope stabilization, and traffic systems. If you have a strong understanding of NYSDOT standards and a passion for maintaining safety and excellence, we want to hear from you. Key Responsibilities * Inspect roadway, highway, bridge, and water infrastructure projects for compliance. * Monitor soil and slope stabilization efforts for safety and quality. * Oversee installation of traffic signals, lighting, and ITS systems. * Verify contract and plan compliance throughout all phases of construction. * Prepare detailed inspection reports and certify materials used. * Utilize Site Manager and/or APPIA software for documentation. Qualifications * 5+ years of experience inspecting civil infrastructure projects. * Strong knowledge of NYSDOT specifications and reporting standards. * Proficiency with Site Manager and/or APPIA software. * NICET certification required; Civil Engineering degree preferred. Additional Information * Work involves on-site inspections in varying weather conditions. * Travel to multiple project locations may be required. * Safety compliance and proper construction site attire are essential. Why Join Us? * Competitive compensation and benefits. * Opportunity to work on high-impact infrastructure projects. * Collaborative and safety-focused work environment. Apply today to help shape the future of civil infrastructure! Job Type & Location This is a Contract to Hire position based out of White Plains, NY. Pay and Benefits The pay range for this position is $40.00 - $60.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in White Plains,NY. Application Deadline This position is anticipated to close on Dec 15, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: Responsible for the Quality Inspection and Testing of Aircraft, Military, and Industrial Gas and Oil production Equipment. Collect and report data to be presented to the customer for reporting purposes. The Quality Technician is responsible for providing inspection and administrative support in order to ensure that all general matters in Quality are handled timely and efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Quality Technician is a hands-on representative of the Quality department whose job is to help ensure all basic visual and test inspections are performed to ensure product integrity and compliance to all specifications at the production facilities. Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits). Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s). Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives. Support generation of FAI and corresponding documentation. Review incoming FAI to ensure compliance to Collins and AS9102 standards. Any other function(s) as assigned by management Maintain calibration records Maintain tools Perform other related duties as assigned. Qualifications You Must Have Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract MSOffice skills Knowledge of GD&T PHYSICAL DEMANDS: Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. May be exposed to uncontrolled environmental conditions. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

The Inbound Inspector is responsible for the inbound inspection for all endoscopes returned to the facility for service and/or repair. Performs initial inspection, defines the necessary repairs and lists the parts and components needed to complete the repair process. Works on all models of Loaner/Demo and Customer scopes. Company Overview At FUJIFILM Healthcare Americas Corporation, we're on a mission to innovate for a healthier world, and we need passionate, driven people like you to help us get there. Our cutting-edge healthcare solutions span diagnostic imaging, enterprise imaging, endoscopic and surgical imaging, as well as in-vitro diagnostics. But we don't stop at healthcare; our Non-Destructive Testing (NDT) team harnesses advanced radiography solutions to keep transportation infrastructure, aerospace, and oil and gas assets safe and running smoothly. Ready to innovate, collaborate, and make a difference? Join us and bring your big ideas to life while working in a dynamic, flexible environment that fuels your creativity and drive. Our headquarters is in Lexington, Massachusetts, an inspiring healthcare research hub in a historic town. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Duties and Responsibilities: * Efficient with computer software necessary to perform duties of the job. * Performs initial inspection, defines the necessary repairs and lists the parts and components needed to complete the repair process. * Provides input and guidance on technical issues. * Adheres to all safety policies and procedures. Operates required equipment in a safe manner following established safety rules, maintains a neat and clean work area, follows established tool and instrument control procedures, and reports any unsafe acts or conditions to immediate supervisor. * Other duties as required * Comply with all applicable U.S. Food and Drug Administration (U.S. FDA) medical device regulatory requirements, applicable ISO 13485 standard requirements and all other applicable laws, regulations and standards. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential tasks. * Electronic and/or Mechanical Cert or degree desired, but will consider experience or demonstrated skill in electronics/mechanical repairs in place of degree. * Electronic and mechanical skills required. * Solder skills and experience required. * Must be able to read and understand schematic drawings and wiring diagrams. * Must follow instructions and apply to real situations in a very quick manner. * Reach monthly targets on a consistent basis. * Ability to meet and/or exceed deadlines. * Able to professionally communicate with internal and external customers. * Able to investigate and resolve discrepancies. * Ability to research and analyze various different types of information. * Ability to prioritize work. * Ability to read, analyze, and interpret essential job related documents. * Expert in identifying all components of Fujifilm endoscopes. * Expert in endoscope failure analysis procedures. * Expert in using special endoscope repair tools and test jigs. * Expert with parts specifications and cross-referencing procedures. * Expert with mechanical drawings and assembly procedures. * Expert with tools and calibration equipment and their standard usage. Physical Requirements: The position requires the ability to perform the following physical demands and/or have the listed capabilities: * The ability to sit up 75-100% of applicable work time. * The ability to use your hands and fingers to feel and manipulate items, use electronic or mechanical repair devices, fine motor skill dexterity, and keyboard use, up to 100% of applicable work time. * The ability to stand, talk, and hear. * Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. * The ability to lift and carry up to 30 lbs. Travel: * 0% Travel may be required based on a business need FUJIFILM is an equal opportunity and affirmative action employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, gender identity, sexual orientation, religion, disability, protected veteran status or any other characteristic protected by applicable federal, state or local law. Salary and Benefits: * $23.49 - $26.00 (depending on experience) * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off Applicants to positions where vendor credentialing or other similar requirements exist to enter facilities will be required to comply with the credentialing requirements of the facilities, including complying with vaccine requirements. For all positions, the Company encourages vaccination against COVID-19 and requires that the successful candidate hired be willing to test for the COVID-19 virus periodically and wear a face covering indoors as required, absent being granted an accommodation due to medical or sincerely held religious belief or other legally required exemption. In compliance with the ADA Amendments Act, should you have a disability that requires assistance and/or reasonable accommodation with the job application process, please contact the Human Resources department via e-mail at ******************************. Additionally, the affirmative program/plan is available for review upon formal request by employees and applicants for employment in the Human Resources office during regular office hours. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (****************************** or ***************.

Job DescriptionBenefits: Paid time off We specialize in the manufacturing of tight tolerance medium to complex aerospace components and assemblies. We are AS9100D. Qualifications Minimum 2-5 years experience in manufacturing / job-shop environment Solid working knowledge with: blue print reading, inspection instruments, tolerancing, GD&T, etc Knowledge of Mitutoyu MiStar 555 desired. The ability to multi-task while accurately performing in-process and final inspections on CNC manufactured parts is a must Experience inspecting close tolerance parts (.001 to .0005) using inspections tools such as micrometers, linear height gage, CMM, depth mics, etc Perform job responsibilities according to internal process specifications and third-party requirements Utilize proper PPE, safety equipment, and follow safety procedures Assist support functions in root cause analysis Must be able to multi-task and work within deadlines Proactively work to improve efficiency and quality of products Use manual and automated measuring / testing equipment to assure product quality Cross-train with employees as needed based upon knowledge and experience Compliantly complete all written and/or electronic labor tracking documentation Report problems to appropriate resource and/or Coach Keep all shift operators informed on special problems involving operation or set up Communicate with team to ensure all team members are aware of product deficiencies, new processes, or issues Provide feedback to appropriate support functions Assist leading and support team initiatives We are constantly growing and always on the look-out for both experienced candidates and those looking to learn the trade. If you are a CNC programmer or operator, manual machinist or toolmaker, or you are just looking to get into the trade, please send us your resume.

The Inbound Inspector is responsible for the inbound inspection for all endoscopes returned to the facility for service and/or repair. Performs initial inspection, defines the necessary repairs and lists the parts and components needed to complete the repair process. Works on all models of Loaner/Demo and Customer scopes. Company Overview At FUJIFILM Healthcare Americas Corporation, we're on a mission to innovate for a healthier world, and we need passionate, driven people like you to help us get there. Our cutting-edge healthcare solutions span diagnostic imaging, enterprise imaging, endoscopic and surgical imaging, as well as in-vitro diagnostics. But we don't stop at healthcare; our Non-Destructive Testing (NDT) team harnesses advanced radiography solutions to keep transportation infrastructure, aerospace, and oil and gas assets safe and running smoothly. Ready to innovate, collaborate, and make a difference? Join us and bring your big ideas to life while working in a dynamic, flexible environment that fuels your creativity and drive. Our headquarters is in Lexington, Massachusetts, an inspiring healthcare research hub in a historic town. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Duties and Responsibilities: Efficient with computer software necessary to perform duties of the job. Performs initial inspection, defines the necessary repairs and lists the parts and components needed to complete the repair process. Provides input and guidance on technical issues. Adheres to all safety policies and procedures. Operates required equipment in a safe manner following established safety rules, maintains a neat and clean work area, follows established tool and instrument control procedures, and reports any unsafe acts or conditions to immediate supervisor. Other duties as required Comply with all applicable U.S. Food and Drug Administration (U.S. FDA) medical device regulatory requirements, applicable ISO 13485 standard requirements and all other applicable laws, regulations and standards. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential tasks. Electronic and/or Mechanical Cert or degree desired, but will consider experience or demonstrated skill in electronics/mechanical repairs in place of degree. Electronic and mechanical skills required. Solder skills and experience required. Must be able to read and understand schematic drawings and wiring diagrams. Must follow instructions and apply to real situations in a very quick manner. Reach monthly targets on a consistent basis. Ability to meet and/or exceed deadlines. Able to professionally communicate with internal and external customers. Able to investigate and resolve discrepancies. Ability to research and analyze various different types of information. Ability to prioritize work. Ability to read, analyze, and interpret essential job related documents. Expert in identifying all components of Fujifilm endoscopes. Expert in endoscope failure analysis procedures. Expert in using special endoscope repair tools and test jigs. Expert with parts specifications and cross-referencing procedures. Expert with mechanical drawings and assembly procedures. Expert with tools and calibration equipment and their standard usage. Physical Requirements: The position requires the ability to perform the following physical demands and/or have the listed capabilities: The ability to sit up 75-100% of applicable work time. The ability to use your hands and fingers to feel and manipulate items, use electronic or mechanical repair devices, fine motor skill dexterity, and keyboard use, up to 100% of applicable work time. The ability to stand, talk, and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. The ability to lift and carry up to 30 lbs. Travel: 0% Travel may be required based on a business need FUJIFILM is an equal opportunity and affirmative action employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, gender identity, sexual orientation, religion, disability, protected veteran status or any other characteristic protected by applicable federal, state or local law. Salary and Benefits: $23.49 - $26.00 (depending on experience) Medical, Dental, Vision Life Insurance 401k Paid Time Off Applicants to positions where vendor credentialing or other similar requirements exist to enter facilities will be required to comply with the credentialing requirements of the facilities, including complying with vaccine requirements. For all positions, the Company encourages vaccination against COVID-19 and requires that the successful candidate hired be willing to test for the COVID-19 virus periodically and wear a face covering indoors as required, absent being granted an accommodation due to medical or sincerely held religious belief or other legally required exemption. In compliance with the ADA Amendments Act, should you have a disability that requires assistance and/or reasonable accommodation with the job application process, please contact the Human Resources department via e-mail at ******************************. Additionally, the affirmative program/plan is available for review upon formal request by employees and applicants for employment in the Human Resources office during regular office hours. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (****************************** or ***************.

General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities * Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. * Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). * Verify material certifications, supplier documentation, and compliance with required standards. * Record and maintain inspection results, nonconformance reports, and supplier performance data. * Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. * Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. * Control of MRB and quality hold areas. * Follow and support ISO 9001:2015 quality management processes. * Ensure inspection tools and gauges are calibrated and in good working condition. * Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required * Minimum 2-4 years of experience in a quality control or inspection role. * Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. * High School Diploma or equivalent required. * Technical or trade school training in mechanical inspection, or a related field is preferred. * Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. * Proficient in the use of precision measuring instruments and inspection equipment. * Understanding of material certification requirements and industry quality standards. * Experience with CMM operation and basic programming a plus. * Strong attention to detail and accuracy in record-keeping. * Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary * Microsoft Office * Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements * Ability to stand for extended periods during inspections. * Ability to lift up to 50lbs. occasionally.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.

The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment. Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows: Ensures company standard practices and cGMP procedures are followed. Issue Batch Records to production and Finished Good inspection records to Operations Maintains SOP binders and updates such through approved Change Controls. Participate in internal and external audit process Inspect and evaluate all incoming components and labeling Inspection and testing of finished goods Authorize release of Quarantined components for production use Responsible for calibration schedules for testing and production equipment PROVIDE SALARY HISTORY TO BE CONSIDERED Qualifications Relevant quality experience along with cGMP and 2 years experience preferred. Experience with FDA compliance regulations a plus Additional Information To be considered you MUST provide the following: Current resume Full Salary History Salary & Benefits : Salary will be based on experience Medical Benefits package available Schedule - F/T Monday to Friday 7:30 to 4:00 pm PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.

Full-time Description The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications. Reads written specifications or receives oral instructions and determines work aids required and inspection procedures. Measures wire/cable for size, and defects using micrometers and fixed gauges. Examines wire for defects, such as pits, scratches, and burnt surfaces. Records test results and informs supervisor when wire varies from specifications. Respools cables according to customers specification and perform final inspections of spools. Any other duties as assigned by supervisor. Requirements Six months to one year of work experience is preferred. Demonstrates ability to self-motivate and to problem solve in a fast-paced setting. Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Must be capable and willing to share knowledge and train associates. Ability to analyze data and make recommendations. Ability to troubleshoot manufacturing defects. Strong interpersonal skills. Ability to seek and accept feedback from others. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent Working conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles The noise level in the work environment is usually moderate. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

Job DescriptionDescription: : Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program Requirements:

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Putnam Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Full-time Description About Generant: Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee-owned and is headquartered in Butler, NJ where most valve and regulator products are manufactured. We look for dedicated and talented people who accept the responsibilities of thinking like owners and embrace our mission as stated in our Quality Policy: “Our Goal is to provide our customers, suppliers and employees true value. We believe this can only be accomplished through a strong commitment to continuous improvement in the quality of our products, services and working environment.” Our ideal candidates: Are people who are personally motivated to produce high-quality work Are lifelong learners - driven to continually improve Are well organized Enjoy working in a team environment Join our growing team and be a part of our journey! Generant is looking for a 3rd shift Quality Control Inspector Join our growing company! 3rd shift is Monday - Friday. 11:00pm - 07:30am Job Summary: The primary function of the Quality Control Inspector is to help assure the quality of finished goods and conformance to product requirements. This is accomplished by inspecting parts, checking calibration status of measurement devices, and documenting inspections and nonconformance. Essential Functions: · Conduct First Article Inspection and in-process inspections of products to ensure compliance with quality standards and specifications. · Maintain Calibration of Metrology Tools · Perform In-Process inspections, Final Inspection, Raw Material Inspection - Bar Stock, Inspection of Incoming Purchased Parts, and Outside Process Inspection · Data Entry into Quality Databases · Interpret mechanical drawings · Communicate product and material nonconformances to management. · Identify and report any deviations from quality standards to the appropriate personnel · Collaborate with production teams to resolve quality issues and implement corrective actions · Conduct root cause analysis and implement preventive measures to minimize defects and improve product quality · Maintain accurate records of inspections, test results, and quality documentation. · Assist in the development and implementation of quality control procedures and processes · Other duties as assigned Requirements Qualifications: Education/Experience/Skills: · High School Diploma or equivalent · 2+ years as a Quality Control Inspector in a manufacturing environment that produces metal pieces · Able to read and interpret engineering drawings · Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators · Advanced Math Skills · Strong knowledge of Statistical Process Control (SPC) techniques and tools · Familiarity with quality control standards and regulations · Must be able to work in a fast-paced environment · Excellent attention to detail and analytical skills · Ability to work independently and as part of a team · Fluent in English (Good Verbal and Written Communication Skills) · Ability to carryout detailed, written and verbal instructions Physical Demands: · Must frequently lift up to 25 pounds and occasionally lift up to 75 pounds · When performing the duties of this job, the employee is regularly required to sit, use hands to finger or handle or feel objects and tools or controls and talk or hear · Employee is frequently required to reach with hands and arms · Employee is occasionally required to stand, walk, stoop, kneel, crouch, or crawl · Specific vision abilities require close vision, distant vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: · Inspector works near moving mechanical parts and is occasionally exposed to vibration · Noise level is usually moderate for a manufacturing plant Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

For immediate consideration, book a meeting with me using this link: ******************************************************************* LiNgI Job Title: Civil Inspector About the Role We are looking for an experienced Civil Inspector to join our team and ensure quality and compliance across civil infrastructure projects. This position offers the opportunity to work on diverse projects, including roadway and structural construction, soil and slope stabilization, and traffic systems. If you have a strong understanding of NYSDOT standards and a passion for maintaining safety and excellence, we want to hear from you. Key Responsibilities * Inspect roadway, highway, bridge, and water infrastructure projects for compliance. * Monitor soil and slope stabilization efforts for safety and quality. * Oversee installation of traffic signals, lighting, and ITS systems. * Verify contract and plan compliance throughout all phases of construction. * Prepare detailed inspection reports and certify materials used. * Utilize Site Manager and/or APPIA software for documentation. Qualifications * 5+ years of experience inspecting civil infrastructure projects. * Strong knowledge of NYSDOT specifications and reporting standards. * Proficiency with Site Manager and/or APPIA software. * NICET certification required; Civil Engineering degree preferred. Additional Information * Work involves on-site inspections in varying weather conditions. * Travel to multiple project locations may be required. * Safety compliance and proper construction site attire are essential. Why Join Us? * Competitive compensation and benefits. * Opportunity to work on high-impact infrastructure projects. * Collaborative and safety-focused work environment. Apply today to help shape the future of civil infrastructure! Job Type & Location This is a Contract to Hire position based out of White Plains, NY. Pay and Benefits The pay range for this position is $40.00 - $60.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in White Plains,NY. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: Responsible for the Quality Inspection and Testing of Aircraft, Military, and Industrial Gas and Oil production Equipment. Collect and report data to be presented to the customer for reporting purposes. The Quality Technician is responsible for providing inspection and administrative support in order to ensure that all general matters in Quality are handled timely and efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Quality Technician is a hands-on representative of the Quality department whose job is to help ensure all basic visual and test inspections are performed to ensure product integrity and compliance to all specifications at the production facilities. Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits). Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s). Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives. Support generation of FAI and corresponding documentation. Review incoming FAI to ensure compliance to Collins and AS9102 standards. Any other function(s) as assigned by management Maintain calibration records Maintain tools Perform other related duties as assigned. Qualifications You Must Have Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract MSOffice skills Knowledge of GD&T PHYSICAL DEMANDS: Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. May be exposed to uncontrolled environmental conditions. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities * Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. * Conduct in-process inspections at specified intervals to monitor quality and verify requirements. * Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. * Accurately record inspection results in logs, check sheets, or digital systems. * Complete First Article Inspection Reports (FAIRs) as required. * Communicate non-conformances promptly to machinists, supervisors, or the quality manager. * Work closely with machinists, programmers, and setup personnel to validate machine setups. * Provide feedback to promote continuous improvement. * Ensure inspection activities comply with company standards and ISO/AS requirements. * Support calibration and proper use of inspection tools. * Maintain adherence to safety protocols and 5S practices. * Ability to detect deviations and recommend corrective actions. * Identifies potential quality risks before they become issues. * Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required * High school diploma or equivalent. * 2+ years of experience in machining, manufacturing, or inspection environment * Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) * Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) * Ability to read and interpret blueprints and technical specifications * Strong attention to detail and problem-solving skills * Good written and verbal communication skills * Experience with ISO 9001, AS9100, or similar quality management systems * Familiarity with statistical process control (SPC) * Knowledge of ERP/MRP systems or digital quality management tools. * Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements * Ability to stand, walk, or sit for extended periods. * Ability to lift to 50 lbs. occasionally. * Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.

Job DescriptionDescription: The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications. Reads written specifications or receives oral instructions and determines work aids required and inspection procedures. Measures wire/cable for size, and defects using micrometers and fixed gauges. Examines wire for defects, such as pits, scratches, and burnt surfaces. Records test results and informs supervisor when wire varies from specifications. Respools cables according to customers specification and perform final inspections of spools. Any other duties as assigned by supervisor. Requirements: Six months to one year of work experience is preferred. Demonstrates ability to self-motivate and to problem solve in a fast-paced setting. Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Must be capable and willing to share knowledge and train associates. Ability to analyze data and make recommendations. Ability to troubleshoot manufacturing defects. Strong interpersonal skills. Ability to seek and accept feedback from others. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent Working conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles The noise level in the work environment is usually moderate. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.