Inspector jobs in Coeur dAlene, ID

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Benewah, Bonner, Boundary, Kootenai, Shoshone Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Full-time Description Wagstaff Applied Technologies manufactures equipment for the nuclear industry. Pay: $30.00 - $40.00 per hour As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family-friendly, company-wide events To view our full benefits summary, please visit https://www.wagstaff.com/Wagstaff/Careers.htm Want to learn more about Wagstaff AT? Visit https://www.WagstaffAT.com Job Summary Perform inspections of electrical control panels and equipment utilizing knowledge of UL 508A and the National Electric Code (NFPA 70). Primary Job Responsibilities Read, understand, and interpret electrical drawings. Conduct documented inspections of control panels and equipment to ensure compliance with drawings, specifications and codes Complete quality documentation as applicable to the inspection Electrically and mechanically test, calibrate and perform various quality control and process control functions on finished product Review customer provided electrical designs and specifications and turn them into packages necessary for equipment production. Create bills of material in the ERP system Review customer designs for compliance with UL 508 A and the National Electric Code, bringing any nonconformance's to the attention of the project manager. Identify potential design, reliability and functionality issues and provide possible solutions that minimize impact on productivity, production schedules and or the customer. Accurately estimate hours to complete production tasks. Represent Wagstaff AT when interacting with auditors, customers, suppliers and visitors Abide by company policies In order to achieve business objectives, work weeks in excess of 40 hours may be required Other duties as assigned Requirements Minimum of 4 years' experience as an industrial electrician. Current journeyman electrician license preferred Demonstrated working knowledge of UL 508A and the National Electric Code Prior experience in electrical inspection preferred. Detail oriented, accurate, and thorough Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor, and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Full-time Description ALLWEST is a 100% employee-owned geotechnical engineering, environmental consulting, construction materials testing, and special inspections firm serving the Inland Northwest and beyond. We have offices located in Hayden, Lewiston and Meridian, Idaho; Missoula, Montana; and Spokane and Tri-Cities, Washington. We are seeking an experienced WAQTC Certified Special Inspector to join our growing Hayden, Idaho team. If you have a desire to work with a dynamic team, grow your career and have a high level of personal accountability, we want to talk with you! General Responsibilities The Special Inspector is responsible for monitoring materials, installation, fabrication, erection, and placement of construction components to evaluate compliance with plans and specifications. Also will provide accurate preparation of electronic daily field reports that summarize services provided and calculation of test results. Requirements WAQTC Certifications: Aggregate Asphalt I Embankment & Base In-Place Density Preferred Certifications: ACI Certified Field Testing Technician Grade I or higher Nuclear Gauge Safety Training ICC Reinforced Concrete ICC Pre-Stressed Concrete ICC Structural Steel and Bolting ICC Structural Welding ICC Spray-applied and Intumescent Fireproofing Additional Requirements Positive attitude with a customer service approach. Effective verbal and written communications skills. Strong attention to detail. Excellent time management skills. Valid driver's license and an acceptable driving record. Ability to drive throughout our northern Idaho service region. Comfortable using computers and mobile devices such as a tablet to record field data. Ability to lift and carry up to 50 lbs. and maneuver up to 75 lbs. with assistance. ALLWEST Benefits We are proud to be a 100% employee-owned company, which means that strong company performance is rewarded to all members of our team. Eligible full-time employees have access to the following benefits: Company paid medical, dental and vision. Short and long-term disability, life, accident, FSA, and HSA options. Paid time off and paid holidays. 401(k) plan with up to 4% company match. ALLWEST Employee Stock Ownership Plan (ESOP). We are an Equal Opportunity Employer. Salary Description $26.00-$35.00 per hour

WAQTC Certified Special Inspector Job Type: Full-time Salary: $26.00 - $35.00 per hour (depending on certifications and experience) A reputable construction services firm is looking for a WAQTC Certified Special Inspector to support inspection and materials testing across northern Idaho and eastern Washington. This field-based role requires hands-on expertise, strong technical skills, and a commitment to quality and safety. Key Responsibilities: Perform field inspections and materials testing in accordance with WAQTC procedures and project specifications. Monitor construction activities for compliance with approved plans and applicable standards. Conduct testing and inspection of aggregates, asphalt, base materials, and in-place densities. Prepare accurate, timely electronic field reports and record test results on mobile devices. Operate and maintain field/lab equipment such as nuclear gauges, density equipment, and sampling tools. Communicate professionally with contractors, engineers, and internal team members. Travel throughout the service region for onsite inspections. Required Certifications: WAQTC: Aggregate Asphalt I Embankment & Base In-Place Density Preferred Certifications: ACI Field Testing Technician Grade I or higher Nuclear Gauge Safety Training ICC Certifications in: Reinforced Concrete Pre-Stressed Concrete Structural Steel and Bolting Structural Welding Spray-Applied & Intumescent Fireproofing What You'll Need: Positive attitude and strong customer service approach Excellent time management and attention to detail Comfortable using tablets or mobile devices for reporting Valid driver's license and acceptable driving record Ability to lift up to 50 lbs and maneuver 75 lbs with assistance Willingness to drive to project sites throughout the region Benefits: 100% employee-owned company (ESOP) Company-paid medical, dental, and vision coverage Short- and long-term disability, life insurance, FSA, and HSA options Paid holidays and PTO 401(k) with up to 4% company match

Job Description Responsible for testing, sampling, measuring and inspection of raw materials, machined parts, final product and processes for quality, deviations, or defects according to specifications. Job Responsibilities: Inspect and perform detailed dimensional evaluation of raw material, machined components, and/or finished product to determine conformance to specifications and established inspection criteria and procedures. Timely and accurately document inspection acceptability or non-conformance per documented procedures. Work from blueprints, diagrams, and customer specifications where general information is provided; requires some independent judgment Effectively utilize measurement devices including micrometers, calipers, and other general inspection equipment Periodically calibrate precision measuring equipment such as calipers, micrometers, bore gauges, etc. using gauge blocks or other suitable tools which are in the calibration system and traceable to NIST Perform and document first article inspections in accordance with AS9102 requirements. Perform visual cosmetic inspection, often using magnification aids or microscope. May devise inspection setups where standard checking equipment is not available and special inspection tools and layouts are required Consult with Quality Assurance supervisor/management personnel for disposition of questionable materials. Ensure quarantined or rejected materials are properly identified, segregated and dis-positioned. Provide timely, accurate and friendly service to all internal and external customers Maintain work area and equipment in a clean and orderly condition Comply with all quality requirements while continually maintaining and improving the effectiveness of MacKay's quality management system Support and participate in department goals as well as company goals Look for opportunities to learn and share your knowledge and skills Punctual attendance; at your work area at shift start Treat others with respect and maintain a professional attitude Be honest in all dealings Other duties as assigned Job Requirements: 2-3 years inspection experience, preferably in a precision manufacturing environment Demonstrated ability to properly utilize precision measuring devices including micrometers, calipers, height gauges, CMM, bore & pitch gauges Natural or corrected vision to at least 20/25 and ability to differentiate between colors Strong attention to detail and ability to multi-task Knowledge of GD&T and ISO 9001 principles Intermediate computer navigation skills, proficient in MS Office: Outlook, Word View full posting including physical, mental, environmental requirements on the website at **************************************** Job Posted by ApplicantPro

Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available. Pay: We pay a competitive standard flat fee per case -based on customer as well as, inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions. Job Type: Independent Contractor Qualifications We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as, the VIITA Basic Commercial Line Inspector course or its equivalent. Full Job Description of the Loss Control Inspector: · Receives assignments electronically and reviews for inspection requirements. · Schedules the inspection appointment with the Insured by phone, email, or text. · Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed. · Interviews the Insured for operations information, ages of the building systems, etc. · Communicates inspection status through online application. · Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos). Preferred skills: 3-5 years' experience providing commercial insurance loss control inspections Understanding of commercial property and casualty lines: property, general liability, and worker's compensation Ability to work independently, manage your time effectively, and communicate well verbally and in writing Comfortable completing reports online and uploading documents Other Recommended Skills: commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius Helpful (but not required) Professional certifications: CSP, OHST, ALCM, ARM H&S Loss Control Inspections, Inc company information: We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service! We look forward to hearing from all qualified applicants!

For almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. We are seeking a dedicated and highly skilled Mechanical Inspector Level 2 to join our team to support source inspections at multiple supplier locations near Tacoma, WA. This critical role requires an experienced professional with a keen eye for detail and a deep understanding of quality assurance practices. If you have a background in the inspection of machined parts, are proficient with all precision hand tools, and can interpret complex GD&T requirements, we invite you to apply for this exciting opportunity. This position with be on site 1 days a week, 8 hours a day. This is a 1 year contract. Key Responsibilities: Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements. Perform incoming inspections from external providers of products and services (e.g., nickel plating). Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run). Compile final inspection sign-off sheets and inspection packages. Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent. Review and validate the justification for parts not inspected at final inspection. Audit and validate the execution of inspection plans as applicable. Document non-conformances using approved methods and submit non-conformance reports for customer disposition. Verify hardware cleanliness and absence of internal or external foreign object debris. Verify fasteners are properly installed; assure torque stripe is continuous and of correct color. Assure products are free of gaps, mismatches, fairing, and of acceptable contour and waviness. Ensure products are of good workmanship and meet specified standards (e.g., oil canning, riding conditions, loose fasteners, drill starts, scratches, dings, burrs, fastener edge distance). Review and validate First Article Inspection (FAI) documentation, including completeness, traceability, and compliance. Ensure the protection and preservation of inspected products for subsequent processing and shipment. Verify applicable shipping documentation for legibility and completeness, including part number, serial number, configuration change letter, and shipping destination. Required Qualifications: Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise. Proficiency in dimensional inspection of precision tolerance parts. Strong knowledge and hands-on experience with all inspection tools. Ability to understand and interpret complex GD&T requirements and validate complex assemblies. Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Preferred Qualifications: Certified or previously certified in GD&T ASME Y-14.5. 5 years of experience in the manufacturing industry, with at least 2 years as a Mechanical Inspector. Note: This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. SQA Services is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. #ZR

Overview Advance Your Career in Insurance Claims with Allied Universal Compliance and Investigation Services. Allied Universal Compliance and Investigation Services is the premier destination for a career in insurance claim investigation. As a global leader, we provide dynamic opportunities for claim investigators, SIU investigators, and surveillance investigators. Our team is committed to innovation and excellence, making a significant impact in the insurance industry. If you're ready to grow with the best, explore a career with us and make a difference. JOB DESCRIPTION: Allied Universal Compliance and Investigations is seeking candidates to fill the role of the Field Site Inspector. The Field Site Inspector will perform site visit inspection services for Medicare and Medicaid providers/suppliers in accordance with established requirements. The Inspector works independently to visit assigned locations, take photographs, conduct interviews, collect data, and document findings. Inspections must be completed using approved guidelines and standards. Multiple positions are available! Must possess a valid driver's license with at least one year of driving experience Pay Rate: $23 - $28 / hr. RESPONSIBILITIES: Conduct independent investigations of assigned cases in a specific geographic area. Document and report observations, activities, and any relevant information in a clear and concise manner using mobile devices (tablets and cell phones) Maintain confidentiality and adhere to legal and ethical standards with the highest professional standards while conducting site inspections Efficient and timely workload management to meet assignment time completion. Review and verify credentials, including education, training, licensure, and certification, for healthcare providers and healthcare facilities as required. Ensure that healthcare providers meet all necessary qualifications and requirements as detailed on provider/supplier-specific site visit checklist forms. Collaborate with Desktop Inspectors and other PEO SVS operational staff for the execution and reporting of site visit inspection performance. Professional attire, demeanor, and Interaction during all contacts with provider/suppliers/facility administrative staff/representative throughout the entire site inspection process. QUALIFICATIONS (MUST HAVE): High school diploma or equivalent Proficient in utilizing laptop computers, mobile devices, and tablets. Flexibility to work varied and irregular hours/days including weekends Successful completion of the Allied Universal Investigations' training/orientation course Successful completion of all required Site Inspector training, internal and CMS-required, both initial and in-service training. PREFERRED QUALIFICATIONS (NICE TO HAVE): Associate degree or higher, preferably in Criminal Justice Prior insurance investigations and/or healthcare facility on-site inspections/compliance. Knowledge of Regulations: Familiarity with industry regulations, such as those from the National Committee for Quality Assurance (NCQA) and The Joint Commission (TJC), Medicare Provider Enrollment, or other healthcare profession or facility credentialing, is highly preferred. Effective public speaking and communication skills. BENEFITS: (full-time employees) Medical, dental, vision, basic life, AD&D, and disability insurance Enrollment in our company's 401(k)plan Seven paid holidays annually, sick days available where required by law Vacation time offered at an initial accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. Closing Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: *********** If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: ***********/offices. Requisition ID 2025-1499910

Advance Your Career in Insurance Claims with Allied Universal Compliance and Investigation Services. Allied Universal Compliance and Investigation Services is the premier destination for a career in insurance claim investigation. As a global leader, we provide dynamic opportunities for claim investigators, SIU investigators, and surveillance investigators. Our team is committed to innovation and excellence, making a significant impact in the insurance industry. If you're ready to grow with the best, explore a career with us and make a difference. JOB DESCRIPTION: Allied Universal Compliance and Investigations is seeking candidates to fill the role of the Field Site Inspector. The Field Site Inspector will perform site visit inspection services for Medicare and Medicaid providers/suppliers in accordance with established requirements. The Inspector works independently to visit assigned locations, take photographs, conduct interviews, collect data, and document findings. Inspections must be completed using approved guidelines and standards. Multiple positions are available! Must possess a valid driver's license with at least one year of driving experience Pay Rate: $23 - $28 / hr. RESPONSIBILITIES: Conduct independent investigations of assigned cases in a specific geographic area. Document and report observations, activities, and any relevant information in a clear and concise manner using mobile devices (tablets and cell phones) Maintain confidentiality and adhere to legal and ethical standards with the highest professional standards while conducting site inspections Efficient and timely workload management to meet assignment time completion. Review and verify credentials, including education, training, licensure, and certification, for healthcare providers and healthcare facilities as required. Ensure that healthcare providers meet all necessary qualifications and requirements as detailed on provider/supplier-specific site visit checklist forms. Collaborate with Desktop Inspectors and other PEO SVS operational staff for the execution and reporting of site visit inspection performance. Professional attire, demeanor, and Interaction during all contacts with provider/suppliers/facility administrative staff/representative throughout the entire site inspection process. QUALIFICATIONS (MUST HAVE): High school diploma or equivalent Proficient in utilizing laptop computers, mobile devices, and tablets. Flexibility to work varied and irregular hours/days including weekends Successful completion of the Allied Universal Investigations' training/orientation course Successful completion of all required Site Inspector training, internal and CMS-required, both initial and in-service training. PREFERRED QUALIFICATIONS (NICE TO HAVE): Associate degree or higher, preferably in Criminal Justice Prior insurance investigations and/or healthcare facility on-site inspections/compliance. Knowledge of Regulations: Familiarity with industry regulations, such as those from the National Committee for Quality Assurance (NCQA) and The Joint Commission (TJC), Medicare Provider Enrollment, or other healthcare profession or facility credentialing, is highly preferred. Effective public speaking and communication skills. BENEFITS: (full-time employees) Medical, dental, vision, basic life, AD&D, and disability insurance Enrollment in our company's 401(k)plan Seven paid holidays annually, sick days available where required by law Vacation time offered at an initial accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. Closing Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: *********** If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: ***********/offices. Requisition ID 2025-1499910

Advance Your Career in Insurance Claims with Allied Universal Compliance and Investigation Services. Allied Universal Compliance and Investigation Services is the premier destination for a career in insurance claim investigation. As a global leader, we provide dynamic opportunities for claim investigators, SIU investigators, and surveillance investigators. Our team is committed to innovation and excellence, making a significant impact in the insurance industry. If you're ready to grow with the best, explore a career with us and make a difference. JOB DESCRIPTION: Allied Universal Compliance and Investigations is seeking candidates to fill the role of the Field Site Inspector. The Field Site Inspector will perform site visit inspection services for Medicare and Medicaid providers/suppliers in accordance with established requirements. The Inspector works independently to visit assigned locations, take photographs, conduct interviews, collect data, and document findings. Inspections must be completed using approved guidelines and standards. Multiple positions are available! Must possess a valid driver's license with at least one year of driving experience Pay Rate: $23 - $28 / hr. RESPONSIBILITIES: Conduct independent investigations of assigned cases in a specific geographic area. Document and report observations, activities, and any relevant information in a clear and concise manner using mobile devices (tablets and cell phones) Maintain confidentiality and adhere to legal and ethical standards with the highest professional standards while conducting site inspections Efficient and timely workload management to meet assignment time completion. Review and verify credentials, including education, training, licensure, and certification, for healthcare providers and healthcare facilities as required. Ensure that healthcare providers meet all necessary qualifications and requirements as detailed on provider/supplier-specific site visit checklist forms. Collaborate with Desktop Inspectors and other PEO SVS operational staff for the execution and reporting of site visit inspection performance. Professional attire, demeanor, and Interaction during all contacts with provider/suppliers/facility administrative staff/representative throughout the entire site inspection process. QUALIFICATIONS (MUST HAVE): High school diploma or equivalent Proficient in utilizing laptop computers, mobile devices, and tablets. Flexibility to work varied and irregular hours/days including weekends Successful completion of the Allied Universal Investigations' training/orientation course Successful completion of all required Site Inspector training, internal and CMS-required, both initial and in-service training. PREFERRED QUALIFICATIONS (NICE TO HAVE): Associate degree or higher, preferably in Criminal Justice Prior insurance investigations and/or healthcare facility on-site inspections/compliance. Knowledge of Regulations: Familiarity with industry regulations, such as those from the National Committee for Quality Assurance (NCQA) and The Joint Commission (TJC), Medicare Provider Enrollment, or other healthcare profession or facility credentialing, is highly preferred. Effective public speaking and communication skills. BENEFITS: (full-time employees) Medical, dental, vision, basic life, AD&D, and disability insurance Enrollment in our company's 401(k)plan Seven paid holidays annually, sick days available where required by law Vacation time offered at an initial accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. Closing Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: *********** If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: ***********/offices. Requisition ID 2025-1499910

The Applied Technologies division at Wagstaff specializes in the engineering and fabrication of stainless steel gloveboxes for the nuclear industry. Our team is growing in this division! Pay: $26.00 - $40.00 per hour, depending on experience Sign-On Bonus: $5,000 (terms & conditions apply) As an employee of Wagstaff, you'll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family-friendly, company-wide events To review our full benefits summary, please visit https://www.wagstaff.com/Wagstaff/Careers.htm Want to learn more about Wagstaff? Join us for a virtual tour! https://www.careerexplorenw.org/fieldtrip?tour=Wagstaff Job Summary Ensure that quality standards are met by assessing products and processes to specified criteria using defined processes. Participate in the improvement of quality standard processes as they pertain to manufactured products, team and company processes and procedures, the plant, and employees. Primary Job Responsibilities * Perform weld inspections on various stainless steel weldments and fabricated equipement * Inspect and report on materials, services, processes, and products using measuring instruments and techniques to ensure conformance with the company's quality standards * Enter data and maintain paper and electronic quality records where required * Participates in problem solving and continuous improvement projects * Represent Wagstaff when interacting with auditors, customers, suppliers and visitors * Communicate with customers and suppliers on quality-related issues as directed by the Quality Assurance Manager * Prepare inspection sheets * Collect, monitor, organize, report, and distribute data as it relates to quality functions of Wagstaff * Prepare and present reports * Assist with specialized inspections as it correlates with individual certifications. * Abide by company policies * In order to achieve business objectives, work weeks in excess of 40 hours may be required * Other duties as assigned Requirements * Current AWS Certified Welding Inspector (CWI) * Candidates must have at least 2 years of dimensional and NDE inspection experience * Ability to read blueprints and mechanical inspection skills, experience/training in Geometric Dimensioning and Tolerance (GD&T) * Candidates must have vision capable of reading a Jaeger Number 1 or equivalent type and size letter at no less than 12 inches (natural or corrected vision). Candidates cannot be color blind * Candidates must be physically able to perform inspections in a manufacturing environment, including the operation of overhead cranes, jibs, and forklifts, after undergoing company training * Proficient in the use of Microsoft Office business software * Detail-oriented, accurate, and thorough Preferred candidate qualifications: * NDE Level II credentials (VT/PT/MT/UT) or the ability to quickly acquire NDE Level II credentials with company-provided training. * Experience with AWS D1.1 & 1.6 and ASME Section VIII & B31.3 weld inspections highly desirable. * Experience with stainless fabrication highly desirable. Working Environment While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor, and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff, Inc. is an Equal Opportunity/Affirmative Action employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other characteristics protected by law. PM22

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR syp Sdd1nO6

Full-time Description ALLWEST is seeking an experienced Certified Construction Materials Special Inspector with project management experience to join our Spokane Valley, Washington team. Our team of diverse and driven professionals fosters an environment of collaboration and growth. ALLWEST is an employee-owned geotechnical engineering, environmental, and construction materials testing firm serving the Inland Northwest and beyond. We have six offices located in Idaho, Washington and Montana. If you have a desire to work with a dynamic team, grow your career and have a high level of personal accountability, we want to talk with you! General Responsibilities The Special Inspector is responsible for monitoring materials, installation, fabrication, erection, and placement of construction components to evaluate compliance with plans and specifications. Also will provide accurate preparation of electronic daily field reports that summarize services provided and calculation of test results. Requirements ICC and/or ACI Certifications: ICC Structural Masonry ACI Certified Field Testing Technician Grade I or higher Nuclear Gauge Safety Training Preferred Certifications/Experience: ICC Reinforced Concrete ICC Pre-Stressed Concrete ICC Structural Steel and Bolting ICC Structural Welding AA in civil engineering technology preferred Project management experience Additional Requirements Positive attitude with a customer service approach Effective verbal and written communications skills Attention to detail Valid driver's license and a clean driving record. Ability to travel throughout our Western Washington service region Ability to use computers and mobile devices such as a tablet to record field data Ability to lift and carry up to 50 lbs. alone, and maneuver up to 75 lbs. with assistance ALLWEST Benefits ALLWEST is an employee-owned geotechnical engineering, environmental consulting, construction materials testing, and special inspections firm serving the Inland Northwest and beyond. We offer competitive wages and a robust benefit package including: Health, dental, vision, FSA, HSA, disability, and life insurance. Paid Time Off 401(k) with company match. Employee Stock Ownership Plan. Profit Sharing Bonuses Assistance with study for and obtaining further certifications We are an Equal Opportunity Employer. Salary Description $26-$35/hour

Field-based role - must reside within commuting distance of one of the company's regional offices A growing construction services firm is seeking certified Special Inspectors to support field inspection activities across various commercial and infrastructure projects. This role focuses on monitoring the installation and construction of structural elements to ensure compliance with plans, codes, and specifications. Key Responsibilities: Conduct special inspections on active job sites, including welding, bolting, reinforced concrete, and structural masonry. Review project drawings and specifications to prepare for field inspections. Drive to job sites and perform inspections in accordance with relevant building codes and contract documents. Operate, calibrate, and maintain field and lab equipment as needed. Accurately complete and submit electronic daily field reports with clear summaries of work performed and observations. Maintain open, professional communication with project managers, engineers, and clients. Ensure reporting and documentation meet all regulatory and company standards. Provide excellent customer service and represent the company's values in the field. May assist with limited project management tasks as assigned. Qualifications: Minimum 3 years of field testing or inspection experience required. ICC, CWI, WAQTC, or other special inspection certifications required based on project needs. Must have a valid driver's license and acceptable driving record. Strong attention to detail and ability to work independently in dynamic field environments. Excellent verbal and written communication skills. Work Environment: Onsite and field-based role; involves frequent travel to construction sites. Must be able to work outdoors in varying weather conditions (heat, cold, rain, snow). Physical activities include walking, standing, stooping, kneeling, and lifting up to 50 lbs (75 lbs with assistance). Willingness to work overtime, weekends, and holidays during peak season (March-November).

Responsible for testing, sampling, measuring and inspection of raw materials, machined parts, final product and processes for quality, deviations, or defects according to specifications. Job Responsibilities: * Inspect and perform detailed dimensional evaluation of raw material, machined components, and/or finished product to determine conformance to specifications and established inspection criteria and procedures. * Timely and accurately document inspection acceptability or non-conformance per documented procedures. * Work from blueprints, diagrams, and customer specifications where general information is provided; requires some independent judgment * Effectively utilize measurement devices including micrometers, calipers, and other general inspection equipment * Periodically calibrate precision measuring equipment such as calipers, micrometers, bore gauges, etc. using gauge blocks or other suitable tools which are in the calibration system and traceable to NIST * Perform and document first article inspections in accordance with AS9102 requirements. * Perform visual cosmetic inspection, often using magnification aids or microscope. * May devise inspection setups where standard checking equipment is not available and special inspection tools and layouts are required * Consult with Quality Assurance supervisor/management personnel for disposition of questionable materials. * Ensure quarantined or rejected materials are properly identified, segregated and dis-positioned. * Provide timely, accurate and friendly service to all internal and external customers * Maintain work area and equipment in a clean and orderly condition * Comply with all quality requirements while continually maintaining and improving the effectiveness of MacKay's quality management system * Support and participate in department goals as well as company goals * Look for opportunities to learn and share your knowledge and skills * Punctual attendance; at your work area at shift start * Treat others with respect and maintain a professional attitude * Be honest in all dealings * Other duties as assigned Job Requirements: * 2-3 years inspection experience, preferably in a precision manufacturing environment * Demonstrated ability to properly utilize precision measuring devices including micrometers, calipers, height gauges, CMM, bore & pitch gauges * Natural or corrected vision to at least 20/25 and ability to differentiate between colors * Strong attention to detail and ability to multi-task * Knowledge of GD&T and ISO 9001 principles * Intermediate computer navigation skills, proficient in MS Office: Outlook, Word View full posting including physical, mental, environmental requirements on the website at ****************************************

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Ferry, Lincoln, Pend Oreille, Spokane, Stevens Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available. Pay: We pay a competitive standard flat fee per case -based on customer as well as, inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions. Job Type: Independent Contractor Qualifications We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as, the VIITA Basic Commercial Line Inspector course or its equivalent. Full Job Description of the Loss Control Inspector: · Receives assignments electronically and reviews for inspection requirements. · Schedules the inspection appointment with the Insured by phone, email, or text. · Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed. · Interviews the Insured for operations information, ages of the building systems, etc. · Communicates inspection status through online application. · Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos). Preferred skills: 3-5 years' experience providing commercial insurance loss control inspections Understanding of commercial property and casualty lines: property, general liability, and worker's compensation Ability to work independently, manage your time effectively, and communicate well verbally and in writing Comfortable completing reports online and uploading documents Other Recommended Skills: commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius Helpful (but not required) Professional certifications: CSP, OHST, ALCM, ARM H&S Loss Control Inspections, Inc company information: We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service! We look forward to hearing from all qualified applicants!

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Ferry, Lincoln, Pend Oreille, Stevens Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position