Inspector jobs in Colorado - 563 jobs

Join Our Team as a Construction Services / Capital Improvement Projects Inspector (I/II/III) Are you passionate about building better communities through infrastructure? El Paso County seeks a detail-oriented, motivated, and collaborative individual to join our Public Works Department as a Construction Services / Capital Improvement Projects Inspector. In this vital role, you'll be at the forefront of ensuring our public works projects meet the highest engineering standards. As an Inspector, you'll conduct hands-on field inspections of concrete, curb and gutter, sidewalks, and roadway surfaces to ensure compliance with the Engineering Criteria Manual (ECM) and/or plans and specifications developed for specific capital improvement projects. You'll document your observations with precision, report to the Inspection Supervisor, and play a key role in maintaining accurate project records using Trimble Unity Construct software. Your responsibilities may also include responding to public inquiries, supporting underground infrastructure locate requests (CO811), and marking the location of County-owned utilities. Whether you're inspecting right-of-way permits or supporting fellow inspectors, your work will help shape the future of El Paso County's infrastructure. If you're looking for a role where no two days are the same and your contributions directly impact the community, apply today to become an essential part of our team! Inspector I Full Salary Range: $55,150.00 - $79,920.00 Hiring Range: $59,500.00 - $64,000.00 Inspector II Full Salary Range: $65,500.00 - $98,340.00 Hiring Range: $72,000.00 - $77,500.00 Inspector III Full Salary Range: $72,850.00 - $109,260.00 Hiring Range: $80,000.00 - $86,500.00 This position has an anticipated work schedule of Monday - Friday, 7:00am - 3:30pm; subject to change. Please be advised this position may close without advance notice, should we receive a sufficient number of qualified applications. Under direct supervision, this performs inspections to uphold the County's infrastructure integrity and safety, ensuring compliance with the El Paso County Engineering Criteria Manual (ECM), Municipal Separate Storm Sewer System (MS4) Permit, and applicable Federal, State, and Local laws, codes, and specifications. This position is part of the Inspector career progression series, which includes Inspector I, Inspector II, and Inspector III. An employee is eligible to advance to the next position within the series when the employee has met the criteria for advancement as notated within the job description and has received a recommendation from the Hiring Authority. Employment is subject to the terms, conditions, and policies detailed in the Personnel Policies Manual (PPM). This position requires regular in-person presence as an essential job function. Inspector I: * Performs inspections on construction, replacement, and repair projects, ensuring projects are completed in compliance with Local, State, and Federal laws, codes, and regulations. * Conducts and analyzes tests on soil aggregates, asphalt, and concrete for compliance with compaction densities and specifications outlined in the El Paso County ECM. * Responds to inquiries and concerns from various entities and the public; investigates and assists in resolving issues. * Oversees subdivision construction functions; reviews and inspects construction, preliminary and final release of financial assurances, and acceptance of improvements with the Public right-of-way and public easements. * Evaluates temporary and permanent erosion prevention and sediment control measures at project sites for compliance with the MS4 Permit and the ECM; recommends enforcement actions; responds to Illicit Discharges and issues Notices of Violation. * Receives Underground Facility Locate Requests and completes daily locate tickets to facilitate safe excavation during construction activities; maintains records and closes active permits as appropriate. * Performs initial and follow-up investigations of drainage complaints made by citizens and business owners; prepares related reports and resolves conflict if possible. * Research and compile technical data for assigned engineering activities, including capital improvement, engineering services, development services, and stormwater. * Consults with and serves as technical advisor to staff, other County Departments, contractors, developers, engineers, and consultants regarding compliance with the ECM, standards, specifications, construction, and building codes. * Reviews technical plans, construction drawings, and shop drawings; test materials and review testing data submitted by outside contractors. * Monitors and inspects stormwater facilities; reports related problems and repair/replacement needs; files related documentation. * Assists in preconstruction and progress review meetings. * Prepares analytical and statistical reports on operations and activities; maintains a variety of files and records; prepares related correspondence as needed. * Prepares Acceptance Punchlists for new developments. * Performs other duties as required. Inspector II: * Conducts the pre-construction meeting prior to the execution of construction contracts. * Coordinates with utility companies prior to and during construction; anticipates and takes action to avoid possible conflicts. * Prepares monthly progress payments, change orders, daily pay item progress forms, weekly time sheets, daily diary, and other associated paperwork. * Conducts condition inspection of concrete, roadway surfaces, patches, curb and gutter, sidewalks, sub-grade, and sub-base, and reports observations to the Inspection Supervisor. * Uses database to maintain records of work performed on construction projects. * Ensures adherence to construction plans and specifications and suggests practical "field fixes" to the project engineer to improve efficiency or cost-effectiveness by using different materials or construction practices. Monitors and ensures contractor adherence to construction plans and specifications. * Ensures proper testing frequencies are followed and reported as they relate to various construction activities. May perform or coordinate materials testing for asphalt and/or concrete. * Serves as day-to-day project manager; coordinates with assigned project engineer regarding escalated issues. * Works with contractors on a daily basis and ensures safety procedures are properly followed. * Responds to customer complaints in a consistent and timely manner; interacts with contractors, coworkers, outside agencies, and the public in a professional and courteous manner. * Reviews and ensures approved Traffic Control plans are followed at all times. * Performs warranty inspections before warranty expiration and ensures any deficiencies are repaired to meet department standards. * Gathers data for next year's paving or concrete construction list and enters data into the database; uses data to estimate the cost of next year's contract and adjusts to meet the available budget. * Provides weekly project update reports. * Completes CO811 Underground Facility Locate Requests and identifies, locates, and marks locations of all El Paso County-owned underground infrastructure as needed. * Provides support to other inspectors as requested. * Performs other duties as required. Inspector III: * Maintains records of work performed on construction projects using Microsoft Access, Excel, Word, and project management software. * Conducts the pre-construction meeting prior to the execution of construction contracts. * Coordinates with utility companies prior to and during construction; anticipates and takes action to avoid possible conflicts. * Prepares monthly progress payments, change orders, daily pay item progress forms, weekly time sheets, daily diary, and other project-related paperwork. * Ensures adherence to construction plans and specifications and suggests practical "field fixes" to the Project Engineer to improve efficiency or when cost savings can be achieved using different materials or construction practices. * Ensures proper testing frequencies are followed and reported as they relate to various construction activities. May perform or coordinate materials testing for asphalt, concrete, and earthwork items. * Performs field bridge inspections and maintains El Paso County's bridge inventory database, adhering to strict guidelines established by the FHWA's National Bridge Inventory System (NBIS). Prepares maintenance work orders and suggests practical repairs. * Works with contractors and engineers on a daily basis and ensures safety procedures are properly followed. * Responds to customer complaints in a consistent and timely manner; interacts with contractors, coworkers, outside agencies, and the public in a professional and courteous manner. * Reviews and ensures approved Traffic Control plans are followed at all times. * Organizes and manages weekly project meetings and additional meetings such as pre-paving and pre-concrete pour meetings. * Acts as the Project Manager's agent in their absence. * Interprets and ensures all plans and applicable specifications are properly implemented. Duties include checking and performing calculations related to the following: steel reinforcement, concrete flatwork, structural concrete, structural steel, pipes and other storm drainage systems, earthwork, paving, striping, traffic signals and signs, fencing, seeding and mulching, site erosion control, and bridge work. * Coordinates projects with the project engineer, contractors, testers, utility companies, and surveyors. Ensures projects proceed in accordance with the County's stormwater quality permit requirements. * Completes CO811 Underground Facility Locate Requests and identifies, locates, and marks the locations of all El Paso County-owned underground infrastructure as needed. * Performs Inspector I and II duties as needed. * Performs other duties as required. Supervision Exercised: This classification does not have supervisory authority and requires no supervision or direction of others. Supervision Received: Receives intermittent supervision. This classification normally performs the job by following established standard operating procedures and/or policies. Regular direction, guidance, and coaching from supervisor is expected. There is a choice of the appropriate procedure or policy to apply to duties. Performance reviewed periodically.Knowledge, Skills, and Abilities Inspector I: * Basic knowledge of methods, equipment, materials, and terminology used in the construction industry. * Working knowledge of computer software including the Microsoft Office suite of products. * Must possess sound mathematical skills with an understanding of algebra and geometry and the ability to perform calculations involving area and volume. * Must observe and follow safety procedures and precautions. * Ability to read and interpret the El Paso County ECM, Colorado Department of Transportation Specifications, the Manual for Uniform Traffic Control Devices (MUTCD), Drainage Criteria Manual Volumes 1 and 2, and the County's MS4 Permit. * Ability to read and understand grading and erosion control plans, road, and bridge construction plans, terminology, and specifications. * Ability to establish effective working relationships with County employees, contractors, builders, developers, and the public. Ability to provide excellent customer service. * Ability to understand and follow verbal and written instructions. * Ability to work independently with instruction and in a team environment. * Ability to complete Individual Development Plan (IDP) based on area of assignment. * Maintain regular and punctual attendance. Inspector II: * Basic knowledge and understanding of Colorado Department of Transportation (CDOT) M&S Standards. * Knowledge of methods, equipment, materials, and terminology used in the construction industry. * Working knowledge of materials testing procedures and intervals. * Working knowledge of computer software including the Microsoft Office suite of products. * Understanding of land surveying and stake interpretation preferred. * Must possess strong mathematical skills with a sound understanding of algebra and geometry and the ability to perform calculations involving area, volume, and slope. * Must observe and follow safety procedures and precautions. * Ability to read and understand construction plans, terminology, and specifications. Ability to read and interpret the El Paso County ECM, Colorado Department of Transportation Specifications, the Manual for Uniform Traffic Control Devices (MUTCD), Drainage Criteria Manual Volumes 1 and 2, and the County's MS4 Permit. * Ability to read and understand grading and erosion control plans, road, and bridge construction plans, terminology, and specifications. * Ability to understand and follow verbal and written instructions. * Ability to establish effective working relationships with County employees, contractors, and the public. Ability to provide excellent customer service. * Ability to communicate effectively both verbally and in writing. * Ability to work independently with instruction and in a team environment. * Ability to complete Individual Development Plan (IDP) based on area of assignment. * Maintain regular and punctual attendance. Inspector III: * Working knowledge and understanding of Colorado Department of Transportation (CDOT) M&S Standards. * Working knowledge of bridges and FHWA's in-service bridge inspection procedures. * Working knowledge of materials testing procedures and intervals and the ability to understand testing results as compared to applicable materials specifications. * Working knowledge of methods, equipment, materials, and terminology used in the construction industry. Working knowledge of computer software, including Microsoft Access and Excel. * Must have a solid understanding of land surveying and stake interpretation. * Must possess strong mathematical skills with a sound understanding of algebra, geometry, and trigonometry and the ability to perform calculations involving area, volume, slope, and unit conversions. * Must observe and follow safety procedures and precautions. * Ability to read and understand road and bridge construction plans, terminology, and specifications. Ability to read and interpret the El Paso County ECM, Colorado Department of Transportation Specifications, the Manual for Uniform Traffic Control Devices (MUTCD), Drainage Criteria Manual Volumes 1 and 2, and the County's MS4 Permit. * Ability to read and understand grading and erosion control plans, road, and bridge construction plans, terminology, and specifications. * Ability to establish effective working relationships with County employees, contractors, and the public. Ability to provide excellent customer service. * Ability to communicate effectively both verbally and in writing. * Ability to work independently with minimal supervision and in a team environment. * Ability to complete Individual Development Plan (IDP) based on area of assignment. * Maintain regular and punctual attendance. Required Education and Experience Inspector I: * High school diploma or equivalent education. * One year of professional experience in a related field. * An associate's degree or higher in a related field may substitute for the required experience. Inspector II: * High school diploma or equivalent education. * Three years of inspection or related experience. * Associate's degree in a related field may substitute for one year of the required experience. * Bachelor's degree in a related field may substitute for two years of the required experience. Inspector III: * High school diploma or equivalent education. * Five years of inspection or related experience. * Associate's degree in a related field may substitute for one year of the required experience. * Bachelor's degree in a related field may substitute for two years of the required experience. Preferred Education and Experience Inspector I: * One year of Public Works or construction-related experience. * One year of inspection experience related to public infrastructure, stormwater, and/or construction. Inspector II: * Public works experience. Licenses/Certificates Inspector I: * Must possess and maintain a valid driver's license. * Successful completion of Traffic Control Technician (TCT) and Traffic Control Supervisor (TCS) training class within six months of employment. Inspector II: * Must possess and maintain a valid driver's license. * Must obtain and maintain necessary certifications and licenses applicable to assigned position and Individual Development Plan. * Successful completion of Traffic Control Technician (TCT) and Traffic Control Supervisor (TCS) training class within six months of employment. * CAPA Levels A and B and ACI Certifications preferred. * Nuclear Density Gauge Certification preferred. Inspector III: * Must possess and maintain a valid driver's license. * Must obtain and maintain necessary certifications and licenses applicable to assigned position and Individual Development Plan. * Successful completion of Traffic Control Technician (TCT) and Traffic Control Supervisor (TCS) training class within six months of employment. * CAPA Levels A and B and ACI Certifications preferred. * FHWA's Inspection of In-Service Bridges Certification preferred. * Rocky Mountain Asphalt Education Center (RMAEC) Asphalt Inspector Certification Level 1 preferred. * Rocky Mountain Asphalt Education Center (RMAEC) Asphalt Technician Certification Levels A & B preferred. Pre-Employment Requirements * Must pass conditional post offer background investigation, motor vehicle record check, drug screen, and physical examination. Duties are performed in an office environment and in the field, including undeveloped vacant land, construction sites, and partially to fully completed structures. Position requires travel throughout El Paso County to construction sites, negotiating rough terrain, and climbing stairs during on-site inspections in the field. Field work requires exposure to weather elements, hazards, close proximity to moving vehicles and traffic, and other adverse physical and environmental conditions. Must be able to safely lift and carry up to 50 pounds. May be subject to varying work schedules based on the needs of the department, including being subject to an on-call schedule rotation and after-hours call-out. The classification specification above is intended to represent only the key areas of responsibilities and minimum qualifications; specific job assignments, duties, education, experience, licenses/certifications, and environmental conditions will vary depending on the needs of the department/office and the particular assignment. Changes to this document may only be made by a member of the Human Resources Department.

Description As a Quality Inspector you'll play a key role in making sure our work meets the highest standards. This position gives you the opportunity to work closely with skilled teams in both shop and field settings, supporting a wide variety of projects and helping ensure each one is done right. You'll be part of a company that values your experience and provides consistent hours, competitive pay, solid benefits, and room to grow. With a strong focus on safety, teamwork, and doing quality work, RK is a place where you can feel confident in what you're building and supported in where you're headed. RK Overview RK Industries (RK) is a second-generation family-owned business built on hard work and strong values. Led by brothers Rick and Jon Kinning, we take pride in delivering a wide range of hands-on services including construction, manufacturing, custom fabrication, and building services. With seven specialized business units working in close coordination, we ensure every job is done right from start to finish. Our proven methods, focus on safety, and commitment to quality help bring our customers' biggest ideas to life. The Certified Welding Inspector (CWI) is responsible for ensuring conformance with internal quality standards and external accreditation requirements (ISO 9001, AISC, and ASME). CWIs conduct inspections, support audits, and collaborate with production teams to ensure high-quality fabrication practices. This role plays a key part in maintaining certifications and creating a culture of continuous quality improvement. The role and responsibilities expand with each level of experience and competency. Role Responsibilities Responsible for assessing corporate conformance to the Quality Management System (QMS), AISC Certification, and ASME Certification Assist with all inspection and testing services provided by RK Monitor activities relating to client expectations of the company. Report QMS progress, activities, and observations to Quality Manager. Review plans to ensure they meet building codes, local ordinances and zoning regulations Monitor construction sites/fabrication facilities to ensure overall compliance Use survey instruments, testing equipment, and other systems to ensure that product meets code and requirements Verify alignment, level, and elevation of products Keep daily logs, including photographs taken during inspection Provide written feedback related to the findings Other duties as assigned Qualifications Indirect supervision. Fully competent in all conventional aspects of subject matter or functional area. Plans and conducts work requiring judgment in independent evaluation, selection and substantial adaptation/modification of standards. Devises new solutions to problems encountered. Independently performs most assignments with instruction Receives guidance for unusual or complex problems and supervisor approval for changes in standards. College/university graduate or equivalent combination of skills and experience generally expected for specified technical roles. CWI Preferred Minimum Physical Requirements and Accountability Work outside, inside, and in dusty, noisy and hazardous areas. Work in high places, tight places, confined spaces and/or other adverse locations. Climb, balance, squat, kneel and crouch. Work in all types of weather. Must have working knowledge of all trade materials and tools. Ability to lift, move, and/or carry 50 lbs. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Wheat Ridge/Aurora, CO | Full-Time | $35.00 - $42.00/hour Join us at Arapahoe Fire Protection and our team of experienced technicians! Founded in 1989, Arapahoe Fire Protection is a leading fire protection company with offices in Aurora, Colorado Springs, and Wheat Ridge Colorado. We are seeking candidates who are looking for a company that they can growth with. We are a family-owned company who values its employees and is looking for future leaders at our business. We're looking for a Kitchen Hood Inspector to join our team and help ensure fire systems, like alarms and sprinklers, are working properly and meet safety standards. This role is a great opportunity to make a difference while working with a supportive and knowledgeable team. Job Overview As a Fire Technician (Suppression/Kitchen hood/Extinguisher), you'll conduct inspections, maintenance, and repairs to ensure fire systems meet all required safety standards. You'll also work closely with customers, educating them on proper system use and providing exceptional service. This role is ideal for an experienced professional with a background in fire system installation, inspection, and repair who values precision and customer satisfaction. Key Responsibilities Inspection and Maintenance Conduct detailed inspections pre-engineered kitchen hood suppression systems. Perform routine maintenance to ensure all fire suppression equipment is functional and compliant with state, local, and national codes. Document all inspections, maintenance, and repairs accurately and promptly. System Installation and Repair Install new fire suppression systems and components as needed. Diagnose and repair malfunctioning or damaged systems, ensuring operational effectiveness. Respond to emergency service calls to provide timely assistance. Customer Support and Collaboration Educate customers on the proper use and maintenance of fire suppression systems. Work collaboratively with the fire protection team to deliver high-quality service and maintain safety compliance. Who You Are We're looking for a hands-on professional with technical expertise and a commitment to safety and customer satisfaction. Experienced: At least 1 year of experience in fire system installation, inspection, and maintenance (kitchen hood suppression systems preferred). Licensed: Fire Suppression License for Pre-Engineered Commercial Hood Systems preferred. Technical Skills: Proficient in the use of power and hand tools, with a strong understanding of fire safety codes. Problem-Solver: Analytical and detail-oriented, with the ability to troubleshoot and resolve issues. Customer-Focused: Excellent communication and interpersonal skills to educate and support clients. Physically Capable: Ability to lift up to 50 lbs and perform physically demanding tasks. Driver's License: Valid license and reliable transportation required. Your First 90 Days with Us First 30 Days Participate in orientation and training to understand company protocols, tools, and client expectations. Shadow senior inspectors to learn workflows and gain hands-on experience. Begin conducting basic inspections under supervision. Next 30 Days (60 Days Total) Take ownership of assigned inspections and maintenance tasks. Develop proficiency with system repairs and installations. Build relationships with customers and team members to foster trust and collaboration. By 90 Days Independently manage inspection schedules and system repairs with confidence. Proactively identify opportunities for workflow improvements. Actively participate in team meetings, sharing insights and contributing to operational strategies. At Arapahoe Fire Protection, we believe in investing in our employees' success. Here's what you can expect: Competitive Pay: $35.00 - $42.00/hour, based on experience. Comprehensive Benefits: Including health, dental, and vision insurance (100% company-paid options available for dependents). Future Savings: A 401(k) savings plan with employer match. Paid Time Off: Generous PTO and paid holidays to support work-life balance. Professional Development: Certification reimbursement, training programs, and career advancement opportunities. Tools and Support: Company-provided vehicle, tools, and resources for success. We Value All Experiences We understand that no candidate is perfectly qualified for any job. Experience comes in different forms; many skills are transferable, and passion goes a long way. Even more important than your resume is a clear demonstration of dedication, impact, and the ability to thrive in a fluid and collaborative environment. We want you to learn new things in this role and encourage you to apply if your experience is close to what we're looking for. We also know that diversity of background and thought makes for better problem-solving and more creative thinking, so we're dedicated to adding new perspectives to the team. Our Commitment to Diversity Arapahoe Fire Protection, a Guardian Fire Services Company, is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by law. Arapahoe Fire Protection is committed to an inclusive experience for all applicants and will endeavor to make reasonable accommodations in the interview process, to the known physical or mental limitations of qualified employees with disabilities unless the accommodation would impose an undue hardship on the operation of our business. How to Apply If you're ready to take the next step in your career and join a team that values expertise, innovation, and growth, we'd love to hear from you. Apply now and become part of the Arapahoe Fire Protection team.

Inspector II - City Right-of-Way The City of Colorado Springs is ready to welcome multiple Inspector II's to the Right of Way Management & Inspection team! As an Inspector II for this team, you will perform technical preliminary, interim, and final construction inspections for assigned engineering projects, which may include roads, streets, appurtenant structures, catch basins, storm basins, bridges, drainage facilities, sidewalks, curbs and gutters, cross pans, and squared returns. This position is subject to budget required furloughs to be implemented in the 2026 calendar year, and any furloughs subsequently approved. Benefits Offered: * Paid Time Off: Vacation, Sick, and Holidays * Medical, Dental, and Vision Insurance * PERA Retirement * Employee Medical Clinic and Pharmacy * Wellness Programs, Fitness Classes, and Gym Discounts * Medical Management Programs * Basic & Voluntary Life Insurance * Short & Long Term Disability * Long Term Care * HRA and Flexible Spending Accounts for Health and Dependent Care * Read more about our many benefits at: **************************************** Work Location: 2880 International Cir, Ste 200-1, Colorado Springs, CO 80901 Job Type: Full-time, non-exempt with opportunity for overtime when necessary Work Schedule: Monday - Friday; 7:30AM - 4:00PM Hourly Salary: $31.11 - $37.35 Hourly We're an accredited pay equity employer! Your starting pay will be within the posted hiring range based on your years of experience and education. As an employee with the City of Colorado Springs, there is room to grow! Click here to view the 2026 Salary Schedule | City of Colorado Springs As an Inspector II, you will: * Perform technical engineering inspections of construction sites, utility trenches, restoration of city assets, and backfill procedures in the City Right-of-Way * Ensure that all work completed complies with City codes and engineering standards, American with Disabilities Act regulations, and approved engineering specifications and plans * Ensure construction is in compliance with all applicable federal, state, and local laws, codes, and regulations * Investigate citizen and business complaints related to assigned area of responsibility * Inspect construction, replacement, and repair projects in the public right-of-way; ensure that all projects are completed in compliance with all local, state, and federal laws, codes and regulations * Conduct and analyze tests on soil aggregate, asphalt, and concrete for compliance with compaction densities and specifications outlined in City ordinances * Oversee subdivision construction functions; review and inspect construction, final release of financial assurances, and acceptance of improvements within the Public Right-of-Way and Public Easements * Learn more about this job by reviewing the class specification on the City of Colorado Springs Class Specifications page We are looking for candidates who demonstrate: Knowledge of: * Basic operations, services, and activities of a comprehensive civil engineering inspection program * Pertinent federal, state, and local laws, codes, and regulations * Methods and techniques of concrete materials testing; asphalt materials testing; and analysis of overlay, repair, and maintenance * Characteristics of soil aggregates and pavement materials associated with restoration in the City Right-of-Way Basic principles of construction management Ability to: * Use ACCELA as a management tool for all inspections and scheduling * Read and interpret blueprints and engineering plans and specifications Interpret and explain pertinent City policies and procedures * Work independently * Safely operate assigned vehicles * Communicate clearly and concisely, orally and in writing * Establish and maintain effective working relationships Minimum Qualifications * Equivalent to the completion of the twelfth grade (high school diploma or GED) * Three years of full-time, professional experience in construction, inspection, or a related field * Possess, or obtain upon hire, and maintain a valid, non-probationary Colorado driver's license not subject to restrictions. Substitutions: We value a diverse range of qualifications and experiences. Our organization views each year of further education as equivalent to each year of relevant work experience, and each year of additional relevant work experience as equivalent to each year of required education. We encourage all to apply! Preferred Qualifications The following qualifications are not required, but they are considered desirable. If you possess any of the preferred qualifications, please include specific details in your application. This information may be used to identify a top group of applicants. * Possess upon hire or willing to obtain within one-year of hire CAPA A Level and CAPA I Level Certifications from the Colorado Asphalt Pavement Association * Possess upon hire or willing to obtain within one-year of hire ACI Certification from the American Concrete Institution * Experience working in a municipal or government agency * Experience civil infrastructure inspection in the public right-of-way * Experience with erosion control and stormwater systems * Training or certification in materials testing, erosion control, or ADA compliance Additional Information Please contact *********************************** for any questions about this position. Physical Demands: Exerting up to 70 lbs. occasionally; 50 lbs. frequently; or negligible amounts constantly; OR requires walking or standing to a significant degree. Environmental Conditions/ Frequency Primary Work Environment - Field Extreme Temperature - Occasionally Wetness and Humidity - Occasionally Respiratory Hazards - Occasionally Noise and Vibrations - Often Physical Hazards - Often Mechanical and/or Electrical Hazards - Often Exposure to Communicable Diseases - Occasionally

Full-time Description A Quality Control/Floor Inspector assists the Chief Inspector with all things as required and needed in support of the Repair Station and operations. This person reports directly to the Chief Inspector. Key Duties and Responsibilities: Maintain a clean and orderly workspace. Work efficiently with the team to ensure a smooth workflow. Assist the Chief Inspector with logbook research as required. Perform aircraft inspections when not inspecting discrepancies or work orders. Assist the Chief Inspector with floor inspection items. Giving the “ok to close panels” and being the “backup” to ensure quality and safety of our products. Assist the Chief Inspector with returning aircraft to service after work is completed. Ensure that we are delivering a safe aircraft that meets our quality standards. Inspecting discrepancies once completed for proper repairs, correct paperwork, and correct sign-off of discrepancies. (Make sure accepted or approved procedures are used at all times). Other duties as assigned. Benefits Available with employment: Medical, Dental, Vision and Supplemental Plans Estimated application closing date: 10/31/25 Requirements Qualifications Education Requirements: Must have High School Diploma or GED Must have an FAA approved Airframe and Powerplant license. Experience Requirements: Ability to work independently with minimal direction. Ability to understand technical publications and requirements. Clear understanding of FAA and Repair Station requirements. Assist with or undertake any other duties as assigned by key personnel. Ability to work with several individuals while showing independence in balancing and prioritizing requests. Three years business/corporate aircraft maintenance experience Other Requirements: Clean driving record. Able to pass a background check. Ability to pass a drug screening test. Occasionally required to lift up to 35 pounds. Must be able to sit, stand, kneel and climb ladders. Must be able to show up to work on time ready to work. Must have dependable transportation to and from work. Ideal Candidate Will Possess the Following Skills: Attention to detail. Sincere desire to assist others. Able to develop a friendly rapport. Persistence in the face of obstacles. Professional in appearance and mannerisms. A willingness to take on responsibilities and challenges. Being reliable, responsible, and dependable, and fulfilling obligations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. Being sensitive to others' needs and feelings and being understanding and helpful on the job. Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. An ability to guide oneself with little or no supervision, depending on oneself to get things done while following the requirements of the Repair Station. Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace. Salary Description $34-$45/hr DOE

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. Proficiency in using digital photography equipment and basic computer skills required Strong attention to detail and the ability to accurately assess and document cosmetic damages Excellent communication skills, both verbal and written, with a customer-focused mindset 2 more items(s) Responsibilities As a Vehicle Cosmetic Inspector at BluCar, you will play a vital role in ensuring the accuracy and quality of vehicle descriptions presented to our customers You will be responsible for meticulously inspecting vehicles for cosmetic damages, accurately documenting findings, and contributing to the overall efficiency and success of our auction process Travel required to DFW for training 8 more items(s) More job highlights Job description General Description As a Vehicle Cosmetic Inspector at BluCar, you will play a vital role in ensuring the accuracy and quality of vehicle descriptions presented to our customers. You will be responsible for meticulously inspecting vehicles for cosmetic damages, accurately documenting findings, and contributing to the overall efficiency and success of our auction process. Essential Duties Travel required to DFW for training (What do you have to be able to do to achieve the desired results of your job? Include management and leadership responsibilities for work team leaders.) • Cosmetic Inspection: Conduct thorough visual inspections of vehicles to identify and document cosmetic damages, including scratches, dents, paint imperfections, and other aesthetic flaws. • Documentation: Accurately record inspection findings using Copart's proprietary software systems, ensuring that all relevant details are properly documented for transparent representation to potential buyers. • Photography: Capture high-quality photographs of vehicles, highlighting both their strengths and any cosmetic imperfections discovered during inspection, to provide comprehensive visual representations to buyers. • Quality Assurance: Maintain strict adherence to Copart's standards and guidelines for cosmetic inspections, ensuring consistency and accuracy in all assessments conducted. • Collaboration: Work closely with other team members, including Vehicle Inspectors, Auction Coordinators, and Customer Service Representatives, to facilitate seamless communication and support efficient auction operations. • Customer Service: Provide exceptional customer service by promptly addressing inquiries and concerns related to vehicle condition and cosmetic discrepancies, fostering positive relationships with both internal and external stakeholders. • Continuous Improvement: Actively participate in training sessions and educational opportunities provided by Copart to enhance your knowledge and proficiency in vehicle inspection techniques and industry best practices. MINIMUM REQUIREMENTS (What is required to perform the Essential Duties?) • High school diploma or equivalent required; additional education or certification in automotive technology or related field preferred. • Previous experience in automotive detailing, bodywork, or cosmetic inspection strongly preferred. • Proficiency in using digital photography equipment and basic computer skills required. • Strong attention to detail and the ability to accurately assess and document cosmetic damages. • Excellent communication skills, both verbal and written, with a customer-focused mindset. • Ability to thrive in a fast-paced environment and prioritize tasks effectively to meet deadlines. • Flexibility to adapt to changing priorities and willingness to collaborate as part of a dynamic team. Pay $27.33 - $30.76 per hour For 40 years, Copart has led its industry in innovation and customer service, enabling it to grow profitably in markets across the globe. Our success is the direct result of the skills and efforts of our talented and diverse employees. Our mindset? It's never just a "job" when your coworkers are like family - it's like coming home. Medical/Dental/Vision 401k plus a company match ESPP- Employee Stock Purchase Plan EAP - Employee Assistance Program Vacation & Sick Pay Paid Company Holidays Life and AD&D Insurance Along with many other employee Benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. Posting End Date: 02-10-2026 At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description As a Senior ICC Inspector, you'll be the go-to expert for construction materials testing and special inspections across high-profile commercial and industrial projects in the Denver metro area. You'll lead field efforts, mentor junior technicians, and ensure that every structure meets the highest standards of safety, quality, and compliance. Responsibilities: Conduct advanced inspections and materials testing on active job sites. Prepare and review detailed inspection reports and test data. Collaborate with engineers and clients to ensure project specifications are met. Mentor and guide junior field staff, with potential to lead inspection teams. Travel locally to project sites (company vehicle provided). Work outdoors in varying terrain and weather conditions. What You Bring: Olsson is looking for a seasoned professional who thrives in the field and takes pride in precision. You're collaborative, detail-oriented, and passionate about building better communities. 5+ years of experience in construction observation, inspection, and testing. ICC Commercial Building Inspector certification OR ICC Structural Steel & Bolting (required). ACI Grade 1, WAQTC, and/or Nuclear Gauge certifications (preferred). ACI Laboratory Certification (a plus). Associate degree in a technical field or equivalent experience. Strong communication and plan-reading skills. Proficiency in MS Office (Word, Excel, Outlook). Valid driver's license with clean driving history. Ability to lift and carry up to 50 pounds. Commitment to safety and alertness in all work environments. #LI-HH1 Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range $28 - $40 USD Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Apply Description $500 New Hire Bonus! Quality Inspector Job Duties Include: Approving finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; performing and/or verifying others' re-work. Quality Inspection Includes: • Ability to read, understand, and follow documented work instructions and Quality Plans for injection molded and assembled parts • Visual inspection and comparison to established cosmetic standards • Dimensional Inspection using manual tools and electronic measuring systems • Calipers, Micrometers, Pressure Testers, CMM, SmartScope, and others • Receiving Inspection • Verification of attributes of materials, inserts, and other components • Product Labeling and Traceability Verification • Documentation of inspection results Education and/or Experience Requirements: • Basic Math Skills, including reading and interpreting instrumentation • High School Diploma or Equivalent • Ability to speak, read, and write basic and technical English (Spanish is a plus) • Experience in Manufacturing Quality or Plastic Injection Molding a plus but not required Pay is $18 to $35 depending on experience and includes paid vacation, paid sick leave, health insurance and 401K with company match. Please apply through this ad. or Drop off resume at: Caroba Plastics 3219 S. Platte River Dr. Englewood, CO 80110 - Please make sure you tell the receptionist you are applying for the QC position. Please no phone calls regarding job posting.

Job DescriptionBenefits: Paid Training Fully Funded Certifications Opportunity for advancement Experienced Geotechnical Inspector Denver, CO $22$32/hr. (depending on experience) Full-Time | MondayFriday | 4050+ hrs./week | Overtime 1.5X Are you looking for a career where your work is hands-on, outdoors, and directly impacts the future of Denver's infrastructure? Join us as an Experienced Geotechnical Inspector and play a critical role in testing and evaluating materials for major commercial, residential, and infrastructure projects. This role is an excellent entry point into the geotechnical, civil, and construction materials testing industry, with clear opportunities for advancement. What Youll Do Collect and test soil, concrete, asphalt, and other construction materials Record GPS data and track site activities Operate drills, sampling equipment, and other field tools Stay activeworking outdoors, on your feet, and with your hands daily Travel between job sites and assist with lab testing Perform light data entry and documentation Why This Role Stands Out: Paid Training Earn while you learn, with raises tied to new certifications Fully Funded Certifications ACI, WAQTC, LabCat, CAPA (all covered by us) Career Growth Strong advancement opportunities into senior inspector or project management roles Perfect for Geology Graduates Apply your knowledge in real-world projects while building a long-term career path Impactful Work Contribute to Denver, CO growing skyline and infrastructure every day What Were Looking For: Valid drivers license with a clean record Ability to pass pre-employment background check and drug test Reliable transportation High School Diploma or GED required Must be 21+ years old

Job DescriptionSalary: $20/hr - $33/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense & space OEMs / Primes & Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts; machined out of standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed, Northrop) to provide components to mission critical civilian and defense programs. Job Purpose: The Quality Inspector performs inspections of product against customer requirements and according to internal procedures while maintaining the timely flow of product and minimizing escapes and other non-conforming materials. Quality Inspector Key Responsibilities and Accountabilities: Perform First Piece, Lot and Final Inspections against customer requirements Conduct in-depth review and able to properly interpret acceptance criteria in accordance with customer purchase order & specifications, including industry standards Command of problem solving techniques such as; 8D, Fish-Bone, 5-why & facilitate Team Based Root Cause Corrective Action(s). Define detailed in-process & final inspection plans Audit in process inspection reports/checklist on the production floor Perform and fill out AS9102 First Article Inspections and Inspection Reports Compile and confirm the accuracy of customer required shipment paperwork Understand and follow internal inspection procedures and maintain inspection records Proper tool selection based on tolerance zones Understand and maintain the ERP system per company policies Keep current with industry inspection techniques, practices and required standards Understand and stay current with industry standard inspection equipment; including calipers, micrometers, bore gauges, height gauges, indicators, etc. and the calibration and maintenance of these instruments Understand and stay current with GD&T standards, terminology and inspection methodologies Be willing to perform other duties as assigned (Calibration, Audits, CAPA, Customer Complaints, RMAs, etc.) At least 3-5 years practical experience in bench inspections and general practices and methodologies Requirements Experience with AS9100 and AS9102 Working knowledge of Special Processes Minimum of 3-5 years practical experience working with bench inspection processes and in-process inspections Working knowledge of Geometric Dimensioning and Tolerancing (GD&T) Strong time management Ability to work independently and meet deadlines Experience working in a manufacturing environment Good verbal and written communication Experience working with MS Excel and Word We offer comprehensive benefits including: Paid Time Off 401(k) with employer match Quarterly Incentive compensation Paid Holidays Medical, dental, vision & life insurance Short- and long-term disability IMPORTANT NOTICE: To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen, or lawful permanent resident of the U.S. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

Job Description Construction Quality Control Inspector - Heavy Civil Job Type: Full-time, Hourly, On-site Starting Pay Range: $28-$32 per hour (depending on experience) Native Sun is hiring a Construction Quality Control Inspector to support heavy civil, underground utilities, and public infrastructure projects in and around Grand Junction, Colorado. This internal QA/QC inspector role focuses on field inspections, quality control, and documentation to ensure work meets plans, specs, CDOT standards, and municipal requirements before city or third‑party inspections. Key Responsibilities: Perform internal quality control inspections on heavy civil and underground utility work (earthwork, trenching, pipe installation, manholes, concrete). Verify work against drawings, specifications, and CDOT / municipal standards; document and help resolve nonconforming work. Track daily quantities, production, and materials for accurate billing, pay applications, and project reporting. Coordinate with other project administrators, city, CDOT, and third‑party inspections, including scheduling and follow‑up items. Maintain detailed inspection reports, daily field logs, and organized project records. Work closely with the Project Manager, Superintendent, and field crews to resolve quality issues in the field and represent Native Sun professionally with inspectors, owners, and agencies. Requirements Minimum 3 years of field experience in heavy civil construction, underground utilities, or public infrastructure (water, sewer, storm, roadway). Knowledge of construction inspections, QA/QC, quantities, and basic construction documentation. Comfortable working as a field inspector on active job sites and completing documentation in the office. Strong communication, organization, and attention to detail; experience on CDOT or public works projects is a plus. Willingness to travel to local job sites and work overtime as needed. If you are a reliable construction professional who takes pride in quality work, public relations, and detailed documentation on active job sites, we want to hear from you. Native Sun is an equal opportunity employer and does not discriminate based on race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, veteran status, or any other protected status under applicable laws. We welcome applications from qualified candidates of all backgrounds.

Night Shift Only: Monday through Friday 2:30PM to 11:00PM (Includes an additional $2.75/hour shift differential) Responsible to maintain quality standards by approval of incoming materials, in-process inspections, and finished products using visual, inspection equipment, tools, and quality knowledge. Entry of data and maintaining of records to ensure compliance to regulations and certifications.Essential Functions and Responsibilities include the following.• Perform in-process and final inspections of parts and assemblies to Engineering drawings and specifications.• Perform specialized inspections, such as first article or conformity• Perform incoming receiving inspection of materials, parts, and assemblies.• Initiate Non-Conformance Reports for discrepant products and maintains NCR quarantine area• Maintain scrap product (e.g. tags, quarantine, log) and render product unusable prior to disposal• Help maintain tool and equipment calibration• Assist with maintaining incoming inspection priorities and part movement through the inspection area• Assist with execution of compliance standards, department processes, and written procedures• Other Duties as assigned.• Regular scheduled attendance• Indicate the percentage of time spent traveling Subject to applicable laws and Air Method's policies, regular attendance is an essential function of the position. All employees must follow Air Methods' employment practices and policies.Supervisory ResponsibilitiesThis position has no supervisory responsibilities. QualificationsTo perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.Education & Experience• High school diploma or general education degree (GED); and three to five years' quality inspection related experience and/or training; or equivalent combination of education and experience.• Aviation or Manufacturing equivalent experience preferred• Knowledge of AS9100 and Part 21 PMA regulations• Knowledge of inspection tools such as micrometers, height gage, calipers, and optical comparators.• Ability to read and interpret engineering drawings and specifications Skills• Strong interpersonal skills and a high degree of collaboration at all levels• Ability to work with individuals within other departments to problem solve, root cause, and continuous improvement.Computer Skills• Proficient with Microsoft Suite, including Word, Excel, and Outlook• Previous experience working with databases and quality systems to enter daily inspection data and provide documentation Certificates, Licenses, Registrations• None"Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status." Minimum pay USD $26.20/Hr. Maximum Pay USD $32.08/Hr. Benefits For more information on our industry-leading benefits, please visit our benefits page here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Inspection & Packaging Lead (3rd shift) This position reports directly to the Inspection and Packaging Supervisors as well as the VILP Manager. The role is responsible for general support of the Visual Inspection, Labeling, and Packaging of finished sterile compounds. The Lead is responsible for ensuring the accuracy for label reconciliation, document completeness and correctness of all product identification. Why Join Leiters Health? Are you passionate about making a real impact in the pharmaceutical industry? Do you thrive in a collaborative, innovative environment where your skills and ideas are valued? Look no further - Leiters Health is seeking talented individuals like you to join our dynamic team! At Leiters Health, we're not just another pharmaceutical company - we're pioneers in the field, dedicated to delivering high-quality compounded sterile products and outsourced solutions to healthcare providers nationwide. Our commitment to excellence and patient safety is at the core of everything we do. Innovative Culture: Be part of a forward-thinking company that encourages creativity, welcomes fresh ideas, and fosters an environment of continuous improvement. Meaningful Work: Contribute to a purpose-driven organization dedicated to providing critical medications and healthcare solutions that positivelyimpactpatients' lives. Professional Development: Access ongoing training, mentorship, and growth opportunities to expand your skills and advance your career within a rapidly growing industry. Cutting-EdgeTechnology: Work withstate-of-the-artfacilities and advanced technologies, staying ahead of the curve in pharmaceutical manufacturing. Collaborative Environment: Join a team of passionate individuals who are dedicated to teamwork, support, and mutual success, fostering a culture of inclusivity and collaboration. Who We're Looking For: We're seeking enthusiastic individuals who are driven, adaptable, and passionate about contributing to a mission-driven organization. Whether you're an experienced professional or just starting your career, Leiters Health provides an environment where your skills and talents will be recognized and appreciated. Sound like you? Apply today! Essential Functions: Lead and perform the line/area clearance of the visual inspection or label, and packaging activities. Review of batch record during and end of visual inspection, label, and packaging activities. Assist Inspection & Packaging Supervisors in overseeing employees who are responsible for visual inspection/labeling/packaging of finished goods. Collaborate with Inspection & Packaging Supervisors to ensure timely visual inspection and labeling of products to meet scheduled batch release dates. Ensure that training on SOPs and processes remains current. Analyze Production efficiencies downtime and waste. Lead teams to improve the results. Write investigations and CAPA actions for non-conformances in the department. Work with QA to quickly resolve any variance or document errors so that product may be released on time. Lead Problem Solving activities. Assist with maintaining batch and label inventory and managing daily staffing for visual inspection and labeling. Other duties as assigned. Supervisory Responsibilities: Lead a team of Associates, providing direction, support, and training. Provide a positive and collaborative work environment through effective communication and accountability, escalating conflict promptly and fairly. Experience and Necessary Skills: 1-year previous leadership experience or comparable experience preferred. Minimum 1 years' experience in aseptic processing preferred. Knowledge of cGMP guidelines/standards. Bachelor's degree or relevant experience preferred. Demonstrated written and oral communications skills including strong presentation skills. Excellent organizational skills and results oriented. Strong results orientation. Strong Microsoft Office skills are essential, proficient in the use of spreadsheets and word processing programs Ability to effectively bring others together and reconcile differences. Able to lift up to 50 lbs. and stand for extended periods when required Must pass an eye exam confirming 20/20 near vision corrected (with contacts or glasses) or uncorrected Must pass an eye exam confirming the ability to accurately perceive color Benefits: Smart healthcare coverage options that rewards wellness (and puts money back in your pocket!) Flexible Spending & Health Savings Accounts (FSA & HSA) available Dental & Vision insurance Employer Paid Life Insurance & Employee Assistance Program Short Term & Long-Term Disability Insurance Up to 4% 401K Matching (100% vested on day one!) Generous Paid Time Off Options - vacation,sick, paid leave and holidays! $5,250 Annual Tuition Reimbursement after 6 months $1,000 Referral Bonus Program with no limit Eligible for annual bonus program Timeline: We will be accepting applications on an ongoing basis until position is filled. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. *Please note that we do not work with third-party recruiters or agencies for this position. If you are a qualified candidate and wish to apply for this job, please do so directly through our official application process. We appreciate your understanding and cooperation in this matter. Monday - Friday 1130pm to 8am

Build an Aviation Career You're Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term. **In addition to a competitive compensation package, generous relocation packages available to qualified candidates. As Chief Inspector, you'll have the authority and responsibility for managing, supervising, coordinating, training and scheduling all inspection functions for maintenance release. What you'll do: Ensure compliance with the Repair Station and Quality Manual (RSQM) in the performance of inspection duties. Ensure the standards and system for receiving, preliminary, hidden damage, in-process and final inspections of articles undergoing maintenance, preventive maintenance or alteration are performed in accordance with the applicable maintenance data and the RSQM. Maintain and Implement QSP 7.5.3 Identification and Traceability. Determine whether the requested maintenance, preventive maintenance or alteration on articles received for work can be accomplished within the applicable maintenance data, despite any other damage or discrepancies noted. Ensure that work performed on articles under the authority of the repair station is appropriately approved for return to service on the maintenance release document. Support the Quality Manager with Audits. Determine when Articles are beyond repair. Initiate the process that determines whether an article should be reported under the Suspected Unapproved Parts program and for filing reports under that program. Ensure Scrap parts are segregated in a manner that will prevent their use in maintenance, preventive maintenance or alteration pending final disposition from the customer. Review and approve operation routers, technical plans and special process parameters, etc. Communicates with vendors and customers as needed. Ensure personnel have appropriate knowledge or are properly trained prior to assigning inspection tasks. Ensure inspection personnel certifications and qualifications are maintained current. Assists with special projects as needed. Basic Qualifications Two or more years of experience working in an FAA 145 repair station or in a similar Quality Control position in an FAA regulated environment. Two or more years of experience with inspection methods, techniques, practices, aids, equipment and tools used to determine the airworthiness of the article on which maintenance, preventive maintenance or alterations are being performed. High School Diploma or general education degree (GED). Ability to frequently lift and/or move up to 25 pounds. Desired Skills A&P License preferred Aviation accessory and/or component experience. Experience with turbo-prop or turbo-fan and/or NDT. Familiar with FAA Order 8130.21 Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-KH1

Job DescriptionDescription: Where Precision Meets Purpose If you're the type who spots the tiny details no one else sees - the slight scratch, the off-angle edge, the imperfection that doesn't quite fit - you'll thrive here. At Accu-Precision, quality isn't a checklist. It's who we are. Around here, we don't just make parts, we make things that leave the planet. From components that fly through the stratosphere to tech that keeps industry moving, what you help inspect at Accu-Precision goes far. Like… outer space far. Our air-conditioned, temperature-controlled facility is built for focus, consistency, and calm… an environment where people who care about getting it right can actually do it right. As a Quality Inspector, you'll work hands-on with high-precision aerospace and advanced manufacturing components, ensuring every part that leaves our doors is worthy of our name. We invest in good people and the latest technology - because both matter equally. We live by our values: Self-improvement Attention to Detail Integrity Teamwork Communication Success Here, your ideas matter, your growth is encouraged, and your pride in your craft shows in every measurement you take. And when we're not working, we're still a team - hosting summer picnics, holiday parties, chili cookoffs, pie bake-offs, and more. Because culture isn't something you write on a wall, it's something you live. If you take pride in precision and want to be part of something that reaches beyond the ordinary - sometimes even beyond Earth - this is your place. Apply today and join a team where precision isn't just a goal - it's a culture. Compensation: $22.00 - $27.00 per hour DOE Shifts: Weekend 3×12 6am-6:30pm, 2nd 4x10 3pm-1am Benefits: Competitive pay Retirement plan Paid time off Medical/Dental/Vision/Life & EAP Training opportunities Accu-Precision is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Requirements:

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. Operate vehicles during the emissions system test and use exhaust analysis equipment. Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. Other job duties as assigned. No experience required; we will train you! Requirements: Must be 18 years of age. Valid and unrestricted driver's license. Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. Physically able to lift, push, and pull up to 20 lbs on an occasional basis. Basic computer skills. Saturday availability required - (State & Program Specific) Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: Team player. Excellent customer service skills. Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. Work in an environment that includes vehicle exhaust fumes, noise, and heat. Work in all weather conditions. Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Shums Coda Associates, Inc. is a privately held company providing professional Building and Safety Consulting Services to clients to verify conformance with Building Codes. We are seeking a Full-time Conveyance Inspector for our clients in Colorado. Conveyance Inspectors are considered highly skilled in performing inspections of both commercial and residential projects, enforcing codes and regulations in a broad range of varied relevant code sets. The work requires independence, discretion, and finesse. Responsibilities • Perform detailed code compliance safety inspections and provide required oversight of testing procedures for vertical transportation equipment. • Witness required testing of various elevator safety components to ensure compliance with applicable safety codes and confirm that operation is in accordance with the test requirements. • Conduct final acceptance inspections of new elevator and modernized elevator systems for compliance with applicable codes. • Provide detailed inspection reports reflecting the inspection / testing results, identifying code deficiencies and recommendations. • Explain elevator safety code compliance deficiencies in order resolve identified issues. • Communicate effectively while working with facility staff and local industry contractors: lead the inspection and testing process to achieve uniform results. • Demonstrate a solid understanding of the applicable Code requirements and inform owners, operators, contractors and building department staff of observed violations. Remove unsafe conveyances from service when required. • Provide training for and demonstrate personal safety practices in the field. • Possess the ability to investigate field incidents and provide concise observations without bias. • Conduct routine code, product technology and safety training, ensuring ongoing development of inspection personnel. • Demonstrate solid decision-making practices and guide inspection personnel for personal development. • Strive to become an industry resource professional. • Provide ongoing effort to increase client base. • Other duties as assigned. Job requirements Minimum Qualifications • Detailed knowledge of commercial and residential building design and construction methods; building, fire, electrical, accessibility and conveyance Codes & regulations • Professional experience performing code compliance inspections of vertical transportation equipment and systems. • Ability to read architectural, engineering and installation drawings, in addition to having a working knowledge of electrical, electronic and circuit construction principles. • Must be certified as a Qualified Elevator Inspector (ASME QEI-1) by an organization accredited by the American National Standards Institute • Demonstrate initiative and sound judgement. • Strong organizational skills and the ability to work independently. • Demonstrate the ability to work through complex issues of code compliance and the methods for achieving results. • Strong working knowledge of MS Office products, MS Word, Excel, Outlook, etc. All done! Your application has been successfully submitted! Other jobs