Inspector jobs in Doral, FL - 272 jobs

Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Property Inspector Looking for a career that pays well without the pressure of selling? Join our team and earn $50K to $75K per year - no selling involved! Responsibilities: • Canvass neighborhoods to find old original windows, door, bathroom and damage roofing • Schedule FREE estimate appointments for windows doors, bathroom and roofing • Work outdoors and engage directly with homeowners Qualifications: • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Salary, Commission & Bonus (Earn $50K to $75K per year) • 5-day work schedule (No Weekends!) • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As an NDT Inspector, you'll perform accurately and in compliance with the industry standards and regulations while being familiar with the scope and limitations of the method of NDT being used. What you'll do: Set up and calibrate non-destructing testing equipment in accordance with the industry requirements. Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection. Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations. Apply testing criteria in accordance with applicable specifications or standards and evaluate results. Organize and report test results. May train others as needed. Perform other job-related tasks as assigned by management. Requirements: Experience with FPI method. Previous experience adhering to quality inspections. Ability to stand, walk, sit, lift, carry, push, pull, reach and handle. Visual acuity and color vision. Ability to move, carry, lift up to 50 lbs. Ability to work extended hours and stand for extended periods of time. Preferred Qualifications: Education & Certification: High School Diploma or equivalent required; some college preferred. ASNT NDT Certification or equivalent certifiable training with documented classroom and/or OJT experience. Technical & Mechanical Skills: Demonstrated ability to perform assigned NDT inspections, accurately interpret results, and apply strong mechanical aptitude. Communication & Professionalism: Communicates clearly and effectively in verbal and written form; conducts themselves professionally and remains open to others' ideas and feedback. Quality & Continuous Improvement: Demonstrates accuracy and thoroughness, promotes quality standards, provides feedback, and actively seeks opportunities for continuous improvement. Adaptability & Work Management: Able to absorb and process information quickly, prioritize and plan work activities, adapt to changing schedules, and adjust to a dynamic work environment. Work Environment & Safety Awareness: Comfortable working in hot and cold climates and in or around industrial environments and potential hazards while adhering to company policies, procedures, and organizational values. Ability to work in a safe manner. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-KC1

We're Looking For Dynamic, Talented and Enthusiastic Individuals To Join Our Team. If You are That Person And Up For The Task, Dont Miss Out On A Great Opportunity At A Long-Term Career. Come to a City that Builds Careers! As one of the largest cities in Broward County, we provides an energetic, innovative and collaborative work environment for its employees. Want Top Notch Insurance? We offer low cost health insurance giving you the best value - Medical, Dental, Vision and Flexible Spending Plans. Need Work Life Balance? We have got you covered with a 4-Day Work Week and an Award Winning Wellness Program. And We Dont Stop There. we provides a generous Paid Time Off Program inclusive of 13 Paid Holidays, Vacation Leave, Personal Leave, and Sick Leave. Repaying Student Loans? Employees at the City with 10 years of public service and on-time payments qualify for the Federal Student Loan Forgiveness Program. Lets Partner Together and Come Grow with us. The Requirements EDUCATION/EXPERIENCE: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required: High School Diploma or GED equivalent. Must possess a valid State of Florida Driver's License. Must be certified, as required by the State of Florida BCAIB, as an Structural Plans Examiner and as an Structural Inspector. Engineers are exempt from BCAIB only. Must be certified by Board of Rules and Appeals and meet at least one of the following qualifications: Be a Florida Registered Architect or a Florida Licensed Professional Engineer, in the discipline requested and having practiced for a minimum of five (5) years within the State of Florida, two (2) years of which shall have been within the HVHZ or by passing BORA's HVHZ exam. Be a Standard Inspector appointed as such, for a minimum of one (1) year by an AHJ or school board within the State of Florida and who complies with at least one (1) of the qualifications listed below: Be a Florida Registered Architect or a Florida Licensed Professional Engineer in the discipline requested with two (2) years of HVHZ experience or by passing BORA's HVHZ exam. Be a BCAIB certified Standard Inspector in the Structural discipline with five (5) years of experience within the State of Florida, of which, two (2) years shall have been within HVHZ or by passing BORA's HVHZ exam. An individual qualifying through this path shall be required to acquire a G.C. license, by exam, within one (1) year of initial certification as an inspector. Be a licensed G.C. with at least five (5) years of experience within the State of Florida in the Structural discipline with that license of which, two (2) years shall have been within the HVHZ or by passing BORA's HVHZ exam. Five (5) years construction experience in the Structural discipline in a supervisory capacity of which at least two (2) years shall have been within the jurisdiction of HVHZ or by passing BORA's HVHZ exam. An individual qualifying through this path shall be required to acquire an Unlimited G.C. license, by exam, from either the Construction Industry Licensing Board (CILB), Broward County Examining Board or the Miami-Dade Construction Trades Qualifying Board, within one (1) year of initial certification as an inspector. Ten (10) years construction experience in the Structural discipline of which at least two (2) years shall have been within the jurisdiction of the HVHZ or by passing BORA's HVHZ exam. An individual qualifying through this path shall be required to acquire an Unlimited G.C. license, by exam, from either the Construction Industry Licensing Board (CILB), Broward County Examining Board or the Miami-Dade Construction Trades Qualifying Board, within one (1) year of initial certification as an inspector. Additional education and experience or an equivalent combination of training and experience may be substituted for the above requirements. CERTIFICATES, LICENSES, REGISTRATIONS: State General Contractors License State and County Building Inspector License State and County Building Plans Examiner License Valid Drivers License: With proof of automobile insurance Background Check: Must have an acceptable background record Driving Abstract: Must have an acceptable driving record KNOWLEDGE, SKILLS, ABILITIES: Knowledge of modern building construction practices, methods, materials and equipment. Knowledge of the principles and practices of engineering applied to enforcing building regulations and to building maintenance. Ability to understand and interpret construction plans and specifications. Ability to establish and maintain effective, professional and cooperative relationships with contractors, city staff, the general public and public officials, and to enforce building ordinances with confidence and tact. Knowledge of city building and zoning codes and related laws and ordinances. Ability to establish and maintain effective and professional relationships with work colleagues, supervisors, managers, and the public. Working Place: Hollywood, Florida, United States Company : Virtual Dec. 18th

Quality Control Inspector Immediate need for a Quality Control Inspector for a manufacturing and construction company in Miami, FL to join our team. The ideal candidate will play a crucial role in ensuring that our products meet or exceed industry standards and customer expectations. RESPONSIBILITIES: * Ensure all products and processes comply with AISC, company, and industry quality standards. * Inspect raw materials, in-process components, and finished steel products through visual checks, measurements, and NDT methods to verify conformance to specifications. * Perform inspections on fabricated and erected steel structures to confirm compliance with design and detailing requirements. * Document and report inspection findings, nonconformities, and root cause analyses; collaborate with production and engineering teams to implement corrective and preventive actions. * Participate in design and scope reviews, validation, and final product approval processes. * Maintain quality documentation, inspection records, and provide data for management review meetings. * Support continuous improvement initiatives to enhance product quality, process efficiency, and safety compliance. * Ensure adherence to all AISC quality assurance procedures, regulatory requirements, and company safety policies. * Contribute to training, audits, and professional development activities as needed. QUALIFICATIONS: * 2+ years' experience with Structural Steel required. * Knowledge of AISC Process. * Detail oriented with ability to multi-task in a fast-moving environment with shifting priorities and changing requirements. * Fluent in the English language, in both oral and written form, required, bilingual in the Spanish language preferred. * Leadership abilities and able to identify and resolve problems. * Strong proficiency with Microsoft Office tools required. * Proficient in the ability to read and interpret drawings and technical documentation; and * Ability to work well under pressure and be able to assist in expediting shipments when necessary, working in conjunction with Production and Shipping schedules. * Ability to foster and promote a positive work environment. EDUCATION/TRAINING/EXPERIENCE: * 3+ years of responsibility in quality management required; within a manufacturing environment preferred. * Experience working in a manufacturing environment preferred. * Must have experience using various mechanical inspection tools, such as computers, micrometers, height gauge, radius gauge, pin gauges, protractors, and calipers. * Experience working with machined parts, assemblies, and/or sub-assemblies preferred. * Civil or Industrial Engineer preferred. BENEFITS: * 401(k) with matching contributions * Health insurance (medical, dental & vision) * Paid time off

We are looking for hard-working, reliable and safety minded individuals to join our team as a road Inspector. As an Inspector you will be the first point of contact with our customers as they bring scrap materials into the yard. Your primary responsibilities will be outside in all weather inspecting and documenting customer loads and directing traffic to the proper collection site within the yard. This position will work outside in varying weather conditions, and SA Recycling strictly adheres to all Metals Recycling Business Health, Safety, and Environmental standards. POSITION SUMMARY The Inspector is responsible for observing and monitoring the delivery of material to verify conformance to quality and quantity specifications, while ensuring that all his/her efforts are compliant with the company Health, Safety, and Environmental standards. Duties may include assisting with daily production operations, as well as receiving and stockpiling of materials and products. Work Environment: Scrap metal yard, outdoor all-weather conditions. MAJOR DUTIES AND RESPONSIBILITIES * Responsible for inspecting incoming customer loads for acceptable and non-acceptable materials. * Maintain a broad and working knowledge of different types of ferrous and non-ferrous materials. * Identify and grade inbound scrap and reject unacceptable items. * Direct customer traffic to the appropriate collection sites. * This includes identifying non-conforming items and properly pointing these out to customer and deducting weight as needed. * Must have excellent communicating skills and be able to handle stressful situations. * Ensure that customers follow proper procedures for selling recyclable materials. * Help guide semi-trucks in & out of yard and maintain an efficient traffic pattern for all vehicles. * Communicate very clearly with the weighmaster and machine operator for each load. * Sort materials for processing as directed and move items to designated storage areas daily. * Assist with unloading materials for customers one at a time. * Clean and maintain work area daily. * Comply with all applicable federal, state, local, & SA Recycling safety, health, & environmental rules, regulations, policies, & procedures. * Properly follow company and OSHA safety procedures * Provide backup or assistance throughout the yard as needed or assigned. Qualifications of an Inspector: * High School diploma, GED Certification, or equivalent work experience. * 1-year previous general labor in the scrap metal or construction industries preferred. * Ability to use a computer tablet. * Bi-lingual (English and Spanish) a plus. * Ability to carry out instructions provided in written, oral, or diagrammatic form. * Ability to learn new tasks as assigned required. * Must pass a Background Check * Must pass pre employment physical and Drug Screen PHYSICAL REQUIREMENTS REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Inspectors must be capable of being on their feet most of the day as well as: Work Environment: Scrap metal yard, outdoor all-weather conditions. * stand and walk frequently on uneven ground and throughout the yard. * lift and carry, capable of repetitive motion and be able to handle physical labor. * push and pull occasionally when moving materials. * crouch or bend at the knees consistently to move or access materials or equipment. * stoop or bend at the waist consistently to move materials. * reach at arm's length and overhead frequently. * twist and turn at the neck and trunk continually. * climb occasionally when obtaining items. * manual dexterity required, as the Inspector will handle, grasp, and manipulate materials constantly. * communicate clearly by speech and hearing continually. * possess visual acuity needed for close detail work and documentation; and * possess mental dexterity to work independently while demonstrating attention to detail and continuous awareness of their environment. SA Recycling offers: * Full time positions with Medical, Dental, Vision, and Life Insurance * 401k with a Company Match * Weekly Pay * Referral Incentives * Company provided uniforms and PPE * Advancement Opportunities * Company provided uniforms and PPE * Eligible for Safety Bonuses PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. An offer of employment by SA Recycling is contingent on the satisfactory completion of a post-offer drug screen, physical exam, and background check with a credit check (if position specified). All US applicants must be 18 years of age or older.

Requirements Required Skills & Qualifications Ability to understand, speak, read and write English Self-starter and/or team player with strong verbal, written, and communication skills. Courteous professional manner when interacting with all employees. Solid technology skills with ability to utilize and learn various types of technology. Strong interpersonal skills to handle sensitive and confidential situations while demonstrating poise, tact, and diplomacy Efficient and high standards of accuracy and organization in performing tasks Strong decision making skills and ability to prioritize work; effective time management skills Analytical and problem-solving skills to find solutions to various problems; good vision, and mathematical competency Proficient in Microsoft Office, including Word, Excel, internet and email Ability to interact with all levels of the organization while maintaining integrity and strict confidentiality regarding sensitive information Solid knowledge of workplace safety regulations and procedures to ensure compliance with health and safety standards. Experienced with production tracking systems and software to monitor performance, optimize processes, and ensure efficient operations. High School Diploma or equivalent 2 years' experience in manufacturing setting Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: Medical Dental Vision Life and AD&D Policies Short and Long-Term Disability 401K with Company Match Paid Time Off Paid Volunteer Time Off Location specific benefits should go here! Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. All applicants must be 18 years of age or older. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

Aoka is a third-party municipal services provider supporting federal, state, and local governments with code compliance, inspections, and consulting services. We specialize in delivering efficient solutions for building safety, housing standards, and regulatory compliance. Our proprietary software, VertexPlans, streamlines inspection services by integrating plan reviews, field inspections, and reporting into one seamless platform-ensuring faster turnaround times and improved communication for our clients. We are currently seeking a qualified OHP compliance Inspector to perform Housing Quality Standards (HQS) inspections for Senior care facilities. Responsibilities Schedule and conduct on-site inspections for new construction and substantial rehabilitation of Senior Living properties Evaluate units for compliance with HUD Housing Quality Standards (HQS) Complete inspection reports and required documentation in accordance with HUD and company guidelines Qualifications Willingness to travel for inspections Valid driver's license and reliable transportation Education & Experience ICC certification, engineering license, or architectural license OR At least 5 years of experience in multifamily housing inspection is required Compensation $30 - $60 per hour, based on experience and qualifications Apply Now to Join Our Growing Team! Aoka is proud to be an equal opportunity employer and provides equal employment opportunities (EEO) to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity or genetics.

Property Inspector Start Your Career in the Field - No Experience Needed Earn $50K to $75K - no selling involved! Responsibilities: • Canvass local neighborhoods to identify homes with old original windows and roofing • Talk with homeowners about the benefits of brand new impact windows & roofing • Schedule appointments for FREE inspections Qualifications: • No experience required (We'll Train) • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Salary, Commission & Bonus (Earn $50,000 to $75,000 per year) • 5-day work schedule • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

CAP Government, Inc. is seeking the immediate hire of a licensed QC Multi-Disciplined Code Inspector needed for construction project inspection and plan review services. The work involves interpreting and applying these regulations to customer relations, reviewing building construction blueprints, product approvals, shop drawings, and other project documents. Some travel may be required for inspections and/or managing projects in the assigned area. Candidates must possess a professional demeanor, have both technical and industry experience, and be a team player. Duties, Responsibilities, and Qualifications Demonstrates excellent communication and customer service skills. Will visit the job site full-time (M-F), 40 hrs. per week, performing the following minimum tasks: Reviewing, observing, and verifying that construction conforms to the scope of work identified by the approved construction documents Observing and verifying that construction conforms to all applicable codes, standards, and guidelines, including the applicable International Codes, local codes, and DoD Standards. Writing/Updating field reports. Experience with MS Office (MS Word) is required. Experience with MS Excel and Adobe Acrobat is highly recommended and desired. Taking photos of construction progress Uploading photos and field reports to our file sharing website for viewing by client Reporting on removal or repair of defective or unsuitable work Reviewing contractors' monthly payment applications and recommending payment to owner Completing a monthly Design & Construction Status Report and distributing to the client Issuing Certificates of Occupancy and/or Certificates of Completions Verifying completion of punch lists Perform other related duties as assigned by the Manager Education/Experience: State of Florida Plan Review License (PX) or provisional license in building, electrical, mechanical, and/or plumbing; or State of Florida Inspector License (BN) or provisional license in building, electrical, mechanical, and/or plumbing, or ICC Residential & Commercial Plans Examiner and/ or Inspection certification in building, electrical, mechanical, and/or plumbing; or Minimum 5 years of experience performing code compliance inspections is required Bachelor's degree in the construction or design field is desirable 3 years in construction administration or superintendent/construction manager role is desirable Experience in managing construction projects as an architect, superintendent, project manager, or similar role, specifically during the construction administration phase of a project is desirable Must have knowledge of the Florida Building Code and other regulations pertaining to construction and development. Ability to understand and interpret codes and evaluate project proposals and projects under construction to verify conformance with code requirements. We offer competitive compensation packages; medical, dental, and vision coverage; life insurance, short- and long-term disability insurance; 401(k); employee referral; educational reimbursement; and more. Salary: Commensurate with experience and licensure Equal Opportunity Employer / Drug-Free Workplace / Veterans Our firm is committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state or local laws.

This is an exempt position, which is skilled inspection work in securing compliance with structural codes, laws and regulations governing existing and new structural installations. The employee in this classification is responsible for the inspection of all construction to ensure that the required standards of quality, material, workmanship and safety as established by the Florida Building Code, Florida Fire Prevention Code, and City Ordinances. This employee normally works independently on field inspections, making decisions requiring the use of technical judgment and discretion, however, consults with the Chief Structural Inspector and/or the Chief's Building Official on the more difficult or unusual cases. Work performance is reviewed by the Chief Structural Inspector and/or the Chief Building Official. Employees are hired as AT WILL employees that serve at the pleasure of the City and may be terminated at any time with or without cause.Performs the building inspection services, coordinates inspection activities in conformance with sound inspection standards; issues inspection reports. Structural Inspectors shall have the power and duties as may be delegated by the Chief Structural Inspector or Chief Building Official. Prepares reports, performs inspections and investigations as required. Consults and deals with the general public, departmental officials, contractors building owners and associates. Checks to insure that all buildings comply with the City requirements. Performs related work as required and as directed. Performs inspections of all buildings or structures as to the conformity to conditions of the permit. Performs inspections which may require employee to climb ladders or multiple flights of stairs, withstand exposure to heights. Enforces building and related City codes. This position does not have final procurement authority.Considerable knowledge of modern practices and methods employed in structural inspection. Considerable knowledge of City and State laws and regulations governing building standards. Ability to detect and locate defective workmanship and operations at any stage of the installation. Ability to coordinate and plan inspectional activities of the City. Ability to prepare reports and maintain records. Ability to operate a City vehicle and possess the required license. Ability to enforce inconformity with firmness, tact, and impartiality. Ability to perform field inspection work. Ability to consult with contractors, building owners, the general public, departmental officials, and associates and to effect and maintain satisfactory working relationships on inspectional and regulatory matters. Ability to understand and carry out instructions and to complete work assignments correctly. Ability to adhere to tight schedules and still maintain work quality. Ability to climb ladders or multiple flights of stairs, withstand exposure to heights and walk on steep inclines, such as a roof to perform inspections. Ability to establish and maintain an effective working relationship with other municipal employees, departmental officials and the general public. Ability to learn computer system for permit activities. DESIRABLE EXPERIENCE AND TRAINING Graduation from a standard high school or an equivalent recognized certificate. Considerable responsible experience in the inspection of plans, specifications, construction, installation and alterations of various buildings, trades, projects or any equivalent combination of experience and training may be considered. To be eligible for appointment as a Structural Inspector or Limited Structural Building Inspector, such person shall be certified by the State of Florida Building Code Administrators and Inspectors Board (BCIAB) as a Structural Inspector. (Exception: Architects and Engineers are exempt from BCIAB certification only.) Such person shall be certified by the Board of Rules and Appeals and shall meet at least one of the following qualifications: a. An Architect or an Engineer in the discipline requested and having practiced within the area of HVHZ for at least three (3) years or b. Either five (5) years construction experience in the Structural discipline in a supervisory capacity of which at least two (2) years shall have been within the jurisdiction of the HVHZ code or five (5) years as an active State Certified Structural Inspector of which at least two (2) years shall have been within the jurisdiction of HVHZ code. An applicant for certification as Structural Inspector under the provision of this section, who has passed BORA HVHZ Exam may substitute experience within the State of Florida for the required HVHZ Experience. c. An applicant for Certification as a Structural Inspector under the provisions of this section who is a graduate from an accredited school holding a Bachelor or Associate of Science Degree in Engineering, Architecture or Building Construction may be credited for three (3) years for Bachelor Degree or one (1) year for an Associate Degree of the required five year experience. Each of the applicants shall possess a current Certificate of Competency as a General Contractor (Unlimited) issued by at least one of the following entities: * Florida Construction Industry Licensing Board * Broward County Central Examining Board of Building Construction Trades (as Class "A" Unlimited General Contractor). * Miami-Dade County Construction Trades Qualifying Board, Block proctored, issued on or after January 1, 1968. * Florida Department of Business and Professional Regulations as an Architect or Engineer. Exception: Individuals holding licenses as a residential contractor and/or building contractor, with a current Certificate of Competency issued by the Florida Construction Industry Licensing Board or Broward County Central Examining Board of Building Construction Trades, may be certified as Limited Structural Building Inspector or Limited Structural Residential Inspector with duties limited to the type and size of work for which they are certified to build. Inspectors employed under this Exception shall be required to attend the first available formal educational course as approved by BORA immediately following employment. For those who are hired without certifications, upon obtaining them, they would receive a $3000 increase in pay. Individuals who already have certification upon hire would be brought in above the minimum at the level of $67, 163.07, incorporating that $3000 increase up front. Additionally, it is recommended that those who receive the bonus after certification be required to stay with the City for at least two years or be required to pay this money back upon separation. This is a designated "Recovery" classification in the City's Emergency Operations Plan and will require the employee occupying this position to work for declared emergencies. Attendance at National Management System (NIMS) training at the appropriate level is mandatory.

at Freedom Forever Competitive Starting Pay + Benefits! • Medical Insurance • Dental Insurance • Vision Care Insurance • $50K Life Insurance • 401K • Medical Reimbursement Accounts (HSA & FSA) • Employee Assistance Program • Paid Time-Off Competitive Hourly Pay + Health, Vision and Dental Benefits Position Summary The Inspections Technician will be responsible for inspecting installations and meeting with inspectors ensuring installations are to code. Job Duties/ Responsibilities Review pictures and gather all necessary parts to complete inspection on site Sit on inspections that have zero to little clean up work needed Verifying labeling and placards are up to code for inspection Call AHJ to confirm inspection time frame in the AM Set up and tie off ladders for the city/county inspectors Rivet placards Open electrical panels & junction boxes so the inspector can observe inside Maintaining the safety of themselves and others by adhering to all written and verbal instructions, promptly reporting and/or correcting all hazards or unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to Field Manager on all safety issues Take notes for corrections and notify Field Manager of any issues or updates Keep inspection vehicle stocked with the necessary materials Service solar panel systems when necessary Perform other duties as assigned Qualification Requirements High school diploma or general education degree (GED) Must have a minimum of 1+ years of experience Must have electrical and roof racking experience? (entry level role?) Electrical apprentice card is preferred Familiarity with electrical plans and field layouts Strong interpersonal and human relations Strong analytical and creative problem-solving skills Good motivation with an attention to productivity, detail and safety Able to work safety with heights on ladders and in confined areas Be able to lift, pull and push materials and equipment to complete assigned job tasks Must be willing and able to climb ladders, stairs, work on rooftops and able to work on your feet for long periods of time Be able to lift 50 pounds of weight frequently throughout assigned workday Attention to detail Excellent written and verbal communication skills Excellent customer service skills Regular, reliable and predictable attendance Ability to work well with others in a collaborative team environment Ability to work in extreme environments (example: hot sun, cold, rain, crawl spaces, etc.) Maintain a clean and safe working environment Must have a valid state driver's license Must have a clean driving record Physical Demands and Abilities Use their hands to handle, control, or feel objects, tools, or controls Stand for long periods of time Walk or run for long periods of time Climb ladders, scaffolds, or poles Kneel, stoop, crouch, or crawl Bend, stretch, twist, or reach out Repeat the same movements See details of objects that are less than a few feet away Determine the distance between objects Use fingers to grasp, move, or assemble very small objects Make quick, precise adjustments to machine controls Hold the arm and hand in one position or hold the hand steady while moving the arm Use one or two hands to grasp, move, or assemble objects Understand the speech of another person Use muscles to lift, push, pull, or carry heavy objects See differences between colors, shades, and brightness Move two or more limbs together (for example, two arms, two legs, or one leg and one arm) while remaining in place Use stomach and lower back muscles to support the body for long periods without getting tired Keep or regain the body's balance or stay upright when in an unstable position React quickly using hands, fingers, or feet While looking forward, see objects or movements that are off to the side lift up to 50+ pounds Freedom Forever is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: veteran status, uniformed service member status, race, color, religion, sex, sexual orientation, gender identity, age (40 and over), pregnancy (including childbirth, lactation and related medical conditions), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics) or any other consideration protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. Employees of Freedom Forever must submit to a criminal history check, MVR check and a 9-panel drug screen that includes the following: Amphetamines, Cocaine Metabolites, Opiates, Phencyclidine (PCP), Barbiturates, Benzodiazepines, Methadone, Methaqualone, Propoxyphene. Job based in Fort Lauderdale not seeking remote employees

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter. All we do is charter. And we do a lot! Our business is built to only serve groups like yours, and you are our number one priority. In addition to concentrating our efforts on being the best in those things you want from any airline - like industry leading safety-programs and over 25 years of proven reliability and financial stability - we provide a suite of services unparalleled by any other airline. Sound like a match? You're in luck. Miami Air is currently seeking a highly motivated and personable individual to join the company as a Quality Control Inspector responsible for the efficient and economic determination of the airworthiness of aircraft, engine, appliance and component maintenance actions as assigned, and conduct inspections in accordance with the Maintenance Program, AD, SB or other requirement to ensure aircraft, engines, appliances and components are maintained to a prescribed standard in order to continue their airworthiness. Functions & Responsibilities Perform preliminary, in progress, hidden damage, and final inspections. Performs special inspections as detailed by the requesting or requiring document. Performs Required Inspection Item (RII) and Buy Back inspections. Perform receiving inspections to ensure the use of legal, conforming and applicable parts and materials. Ensure that inspections and surveillance are performed as required on necessary maintenance actions in order to assure the use of approved data, material, tools, test equipment and that high standards of workmanship are present. Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies and procedures. Conduct daily audits of aircraft work packages including checks/inspections forms, log pages, routines and non-routines, modification orders, etc. to ensure completion, correctness, use of appropriate references to approved data in all entries and forms. Review the aircraft and engine logbooks, using the same criteria as described in item f above, at checks and during accomplishment of any maintenance. At the appropriate checks, transcribes all pilot reports and deferred maintenance items to the appropriate work forms. Conduct records analysis of audits and reviews of data/information for continuing analysis and surveillance reports as identified by the Manager, QC/QA & Training. Lead and maintain the current the Structural Defect Log as assigned. Review and address the calibrated tools and equipment status and shelf-life status and ensure correction of any discovered discrepancies during the first 10 days of each month. Perform as a “Designated Instructor” in areas and/or on subjects as qualified and approved by the Manager, Maintenance Training and QA. Perform the inspections of S.O.S. Tag items and documents results per the S.O.S. program. Complete safety and housekeeping checks of hangar and line work areas on a routine basis as designed and assigned by the Manager, QC/QA & Training. Perform other duties as necessary within the scope of quality. Qualifications & Requirements Associate degree A&P Mechanic License Airman's Certificate with A&P ratings for a minimum of 3 years. 3 years of experience as licensed A&P mechanic with 2 years of maintenance experience on large aircrafts. Boeing 737 experience, Classic and NG preferred. ETOPS and RVSM operations experience. Knowledgeable of the FARs, GMM, Maintenance Programs. Excellent written and oral communication skills. Proficient with Microsoft applications. Knowledge of TRAX systems, a plus. Knowledgeable of manuals and publications skills, a plus. Miami Air International provides equal employment opportunities to all legally eligible and authorized to work applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.

GotWorX, Inc. Is currently seeking a Quality Control Inspector for our client based in the Tamarac area. This is a temp-hire opportunity for the right candidate. Client is currently offering a salary of $ 18 pay rate, plus a benefits package once perm employee! Overview: The Quality Control Inspector ensures that incoming, in process, and finished parts are within all required specifications per drawings and work instructions. It is the Quality Control Inspector s responsibility to implement good documentation practices (GDP) and proper material identification, preventing nonconforming material from continuing through the process without proper approval, to ensure that the customer gets parts that function properly every time. Responsibilities: Performs area specific internal quality audits Performs area specific 5S audits Performs random in-process audits in designated areas Performs first piece inspection audits for team members as required Maintains and stores inspection equipment appropriately Verifies presence of calibration sticker before using measurement device Notifies manager of equipment with past due calibration Notifies manager of calibrated items that need attention Reviews and provides feedback on procedures, policies, and processes Applies proper sampling methods (AQL) managing risk and cycle time Interprets and inspects mechanical drawings (GD&T literate) Maintains all inspections records or other required documentation Coordinates, implements, and documents containment actions Actively supports conducting root cause investigations In order to be considered, we require: High School Diploma or GED required Prior experience in quality control field preferred Prior inspection experience preferred Prior forklift experience preferred Prior machining / CNC experience preferred Prior SAP experience preferred Candidates will be required to complete a background check and drug screen before beginning work.

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. 2nd Shift: 2:30pm-11:00pm

Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As an Inspector, you'll have the responsibility of inspecting, identifying, and determining status of products being processed for repair or overhaul. What you'll do: Determines and documents the modification status/configuration of products being processed for repair or overhaul to verify compliance to the applicable regulatory and customer requirements. Ensures the products to be inspected are sufficiently clean and in acceptable condition to perform the inspections necessary to complete the work instruction. Determines the repairability of those products not meeting the applicable requirements. Records the inspection results on the appropriate inspection documentation. Generates the applicable documentation for the repair of unserviceable products. Inspects and identifies parts in the Reduced to Spares (RTS) process. Supervises detail inspection trainees in the on-the-job training (OJT) process. Participates in continuous improvement of cell processes. Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements. Moves between production assignments that utilize multiple skills as needed to support production requirements. Participates in the cross training of other technicians as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. Carries out other duties as assigned. Position Requirements: 1-2 years of experience in the aircraft engine components repair industry. Must be able to provide documentation of at least 1 year or more of on-the-job training (OJT) specific to the duties performed in order to qualify for a Repairman Certificate in a short period of time. Must be able to demonstrate experience in using precision measuring tools. Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day. Ability to sit for prolonged periods. Preferred Characteristics: Knowledgeable in and ability to identify and interpret conditions on products that are the result of service operation. Ability to use and interpret publications used in the production process (graphs, charts, schematics, blueprints). Working knowledge of the functions and operation of the products being inspected. Working knowledge of production management computer system and other related internal control systems. Experience with RTS (Return to Service) on aircraft parts. Ability to sign off on 8130's by having a repairman certificate or A&P license. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-KC1

Property Inspector Trainee Canvass neighborhoods to identify homes with old original windows, doors, roofing and bathroom. Responsibilities: • Canvass local neighborhoods to identify homes with old original windows, doors, roofing and bathroom. • Work outdoors and engage directly with homeowners • Schedule FREE estimate appointments for windows, doors, roofing and bathroom. Qualifications: • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Competitive hourly plus commission and bonus (Earn $50K-$75K per year) • 5-day work schedule (No Weekends!) • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

Property Inspector - Entry-Level ($50K-$75K) We're looking for friendly, motivated people who enjoy talking to others! As a Property Inspector, you'll walk local neighborhoods, chat with homeowners, and schedule FREE window inspections - no selling required. What You'll Do: Talk with homeowners in your area Share our free window inspection offer Schedule appointments for our sales team What We're Looking For: Outgoing, positive attitude Enjoy working outdoors and meeting new people No experience needed - we provide full training What We Offer: Earn $50K-$75K+ (Base Pay + Commission) Paid training and full support 5-day work week - no late nights Growth opportunities with a fast-growing company How to Apply: Submit your resume and phone number. Qualified applicants will be contacted for a quick phone interview.