Inspector jobs in El Paso, TX - 49 jobs

Eaton's ES AMER ARS PDCAD division is currently seeking a Quality Inspector. is $19.76 per hour. is also eligible for a variable incentive program.** Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** The Quality inspector will verify correct wiring, components, program controllers, and conduct electrical testing of switchboard nproducts and components, as required, per applicable test procedure and/or component literature with the overall ngoal of timely order fulfillment and adherence to Eaton's quality standards. + Inspect and Hi-Pot switchboard product produced on all lines, according to inspection work instructions and in accordance with applicable governmental requirements, to confirm proper function of switchboards and electrical components, identify any product non-conformances, and ensure it meets customer specification, safety and quality requirements. Document inspections made on applicable checklist. + Use Hi-Pot, continuity test, and component-specific testing devices to perform electrical testing. Verify switches and circuit breakers function properly. Verify torqued connections using torque wrench, per inspection instructions. Conduct electrical and mechanical tests per safety and training requirements and procedures. (Hi-Pot) + Examine and verify mating structures (all structures in a line-up) as necessary to ensure that job is complete and field installation is problem-free (i.e. splice plate dimensions, kirk key coordination, etc). + Verify that any revisions released to the production floor regarding functionality and customer specifications are incorporated into the product, all documentation reflects the current revision, and previous revisions of documents are not used / discarded. (Process and Update paperwork accurately - POM, test reports, etc.) + Thoroughly document and communicate non-conformances, which are critical quality records, and verify required rework to aid problem solving and continuous improvement efforts. Communicate design errors to appropriate front-end personnel for correction, obtain revisions, and verify required rework. + Serve as informal trainer for production associates, communicate well with other associates, and build positive relationships that support job objectives and teamwork. Helping particularly for complex tasks and for product requirements that may not be precisely defined (i.e. barrier placement). + Troubleshoot, update, develop test setups and new procedures when current procedures are inaccurate. **Qualifications:** **Basic Qualifications:** + Must have a High school diploma or equivalent from an accredited institution. + Minimum of 6 months manufacturing, production, or military experience OR a degree in a technical discipline + Must be legally authorized to work in the United States without company sponsorship. + No relocation benefit is offered for this position. Only candidates residing within the immediate area of the Eaton El Paso, TX facility (50-mile radius) will be considered for this position. **Preferred Qualifications:** + Two or more years of experience in a Quality or Inspector position in a manufacturing environment. + Experience in switchboard assembly. + Computer literate. + Working knowledge of Lean concepts. + Associate degree in Mechatronics, Electrical Engineering or Electronics. **POSITION CRITERA:** + Candidate must be able to travel outside of the continental United States including, but not limited to, the Puerto Rico, Dominican Republic, Mexico and Canada **Skills:** + Strong verbal and written communication skills, persuasive skills, and analytical problem-solving skills. Work with individuals and groups to effectively participate within a team environment. + Knowledge of basic electricity, current flow, and component functionality schematics/wiring diagrams and assembly processes on all lines. (Hi-Pot, Shunt Trip). + Knowledge of all assembled SWBD product designs (i.e. PRL-C, PRL-I, IFS, FDS, MF, etc.) + Experience in applicable UL codes, NEC codes, regional utility codes, customer-specific requirements. + Ability to read, comprehend, and interpret manufacturing documents, including front view, MIs, Blow-Thru, Wiring Diagrams, component literature, engineering drawings, and testing procedures. + Requires thorough knowledge of basic electricity, current flow and component functionality We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a part time petroleum inspector, to join our Caleb Brett team, working Onsite from El Paso, TX. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award-winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The full time time petroleum inspector is responsible for volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, etc. This position will involve traveling to client locations for onsite inspections. Shift/Schedule: Full Time plus the availability to work on-call hours What you'll do: Understand and adhere to Caleb Brett safety procedures. Seal Tanker Trucks at 3rd party terminals. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. Perform routine equipment calibrations, verification and function checks. Verify and communicate the results obtained and to make the entries into the appropriate media. Provide on the job assistance and receive training from more experienced inspectors. To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned. To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. To perform routine equipment calibration, verification and function checks. To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. To maintain work areas, records and equipment in a clean, organized and functional condition. To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis. Cannot have a fear of heights. Ability to climb ladders and stairs for shore tanks. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. Ability to perform visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships. Ability to complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. Ability to perform routine equipment calibrations, verification and function checks. Ability to verify and communicate the results obtained and to make the entries into the appropriate media *Valid driver's license and reliable driving record (required) Model Intertek's 10X Energies at all times within the work place, practicing business the right way. Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Ability to travel as business needs dictate. Physical requirements to include: Lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving. Preferred Requirements & Qualifications: IFIA certified is a plus! TWIC is a plus!

Full Time Petroleum Inspector- Travel to client sites Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a part time petroleum inspector, to join our Caleb Brett team, working Onsite from El Paso, TX. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award-winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The full time time petroleum inspector is responsible for volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, etc. This position will involve traveling to client locations for onsite inspections. Shift/Schedule: Full Time plus the availability to work on-call hours What you'll do: * Understand and adhere to Caleb Brett safety procedures. * Seal Tanker Trucks at 3rd party terminals. * Able to perform by specified methodology the below duties in addition to completing the associated paperwork. * Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. * Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks. * Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. * Perform routine equipment calibrations, verification and function checks. * Verify and communicate the results obtained and to make the entries into the appropriate media. * Provide on the job assistance and receive training from more experienced inspectors. * To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned. * To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. * To perform routine equipment calibration, verification and function checks. * To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. * To maintain work areas, records and equipment in a clean, organized and functional condition. * To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: * Must have basic grasp of basic mathematics and work in an automated environment. * Ability to work on an on-call basis. * Cannot have a fear of heights. * Ability to climb ladders and stairs for shore tanks. * Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. * Ability to perform visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships. * Ability to complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. * Ability to perform routine equipment calibrations, verification and function checks. * Ability to verify and communicate the results obtained and to make the entries into the appropriate media * *Valid driver's license and reliable driving record (required) * Model Intertek's 10X Energies at all times within the work place, practicing business the right way. * Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. * Ability to travel as business needs dictate. * Physical requirements to include: Lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving. Preferred Requirements & Qualifications: * IFIA certified is a plus! * TWIC is a plus! Intertek: Total Quality. Assured. Intertek is a world leader in the Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. With passion, pace, and precision we work to exceed our customers' expectations, while engaging with our employees to be 10X in their performance and professional growth. Intertek is a drug-free workplace. As a condition of employment, certain positions may be required to pass a pre-employment drug test based on the type of work that will be performed. We Value Diversity Intertek's network of phenomenal people are our greatest assets, and the diversity they bring fuels our success. Intertek is an Equal Employment Opportunity Employer that values inclusion and diversity. We take affirmative action to ensure all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. For individuals with disabilities who would like to request accommodation, or who need assistance applying, please email ******************* or call ************** (option #5) to speak with a member of the HR Department. #LI-CL1 * Intertek does not accept unsolicited approaches from agencies and will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

Full Time Petroleum Inspector- Travel to client sites Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a part time petroleum inspector, to join our Caleb Brett team, working Onsite from El Paso, TX. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award-winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The full time time petroleum inspector is responsible for volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, etc. This position will involve traveling to client locations for onsite inspections. Shift/Schedule: Full Time plus the availability to work on-call hours What you'll do: Understand and adhere to Caleb Brett safety procedures. Seal Tanker Trucks at 3 rd party terminals. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. Perform routine equipment calibrations, verification and function checks. Verify and communicate the results obtained and to make the entries into the appropriate media. Provide on the job assistance and receive training from more experienced inspectors. To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned. To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. To perform routine equipment calibration, verification and function checks. To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. To maintain work areas, records and equipment in a clean, organized and functional condition. To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Must have basic grasp of basic mathemati cs and work in an automated environment. Ability to work on an on-call basis. Cannot have a fear of heights. Ability to climb ladders and stairs for shore tanks. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. Ability to perform visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships. Ability to complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. Ability to perform routine equipment calibrations, verification and function checks. Ability to verify and communicate the results obtained and to make the entries into the appropriate media *Valid driver's license and reliable driving record (required) Model Intertek's 10X Energies at all times within the work place, practicing business the right way. Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Ability to travel as business needs dictate. Physical requirements to include: Lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving. Preferred Requirements & Qualifications: IFIA certified is a plus! TWIC is a plus! Intertek: Total Quality. Assured. Intertek is a world leader in the Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. With passion, pace, and precision we work to exceed our customers' expectations, while engaging with our employees to be 10X in their performance and professional growth. Intertek is a drug-free workplace. As a condition of employment, certain positions may be required to pass a pre-employment drug test based on the type of work that will be performed. We Value Diversity Intertek's network of phenomenal people are our greatest assets, and the diversity they bring fuels our success. Intertek is an Equal Employment Opportunity Employer that values inclusion and diversity. We take affirmative action to ensure all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. For individuals with disabilities who would like to request accommodation, or who need assistance applying, please email ******************* or call ************** (option #5) to speak with a member of the HR Department. #LI-CL1 * Intertek does not accept unsolicited approaches from agencies and will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

We are looking for hard-working, reliable and safety minded individuals to join our team as an Inspector. As an Inspector you will be the first point of contact with our customers as they bring scrap materials into the yard. Your primary responsibilities will be inspecting and documenting customer loads and directing traffic to the proper collection site within the yard. This position will work outside in varying weather conditions, and SA Recycling strictly adheres to all Metals Recycling Business Health, Safety, and Environmental standards. SA Recycling offers: Competitive Pay Eligible for Safety and Profitability Bonuses Comprehensive benefits including affordable medical options, dental and vision care 401k with a Company Match Weekly Pay Referral Incentives Company provided uniforms and PPE Responsibilities of an Inspector: Maintain a broad and working knowledge of different types of ferrous and non-ferrous materials. Identify and grade inbound scrap and reject unacceptable items. Direct customer traffic to the appropriate collection sites. Inputs customer and scrap information into SA Recycling's customer database and completes inspection tickets. Observes all customer drop-offs for unacceptable items. Performs other general laborer duties as directed. Qualifications of an Inspector: High School diploma, GED Certification, or equivalent work experience. 1-year previous general labor in the scrap metal or construction industries preferred. Ability to use a computer tablet. Bi-lingual (English and Spanish) a plus. Ability to carry out instructions provided in written, oral, or diagrammatic form. Ability to learn new tasks as assigned required. PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. An offer of employment by SA Recycling is contingent on the satisfactory completion of a post-offer drug screen, physical exam, and background check with a credit check (if position specified). All US applicants must be 18 years of age or older.

Responsible for inspecting at 100% of assigned section and assuring that the construction of the product is in accordance to the methods, specifications, measurements, requirements, fit, form and function. ESSENTIAL DUTIES AND RESPONSIBILITIES: Inspect 100% of assigned finished products. Follow proper inspection method and check product for any possible defects. Verify construction specifications. Identify any defects on the product. Mark defective product for repair. This position has no supervisory responsibilities. Perform other duties and responsibilities as required or requested. Qualifications MINIMUM JOB REQUIREMENTS: To perform this job successfully, and individual must be able to perform each essential duty satisfactorily. The requirements listed on the job analysis are representative of the skill, and/or ability required. Education: High School Diploma or GED preferred, but not required. Experience: Six months related experience in the garment industry. Specific Skills: Must be able to measure and properly fill out required forms and documentation. Specialized Knowledge, Licenses, etc.: None required. Other Skills and Abilities: Effective oral and written communication skills required. Physical Demands: Frequently bends, kneels, reaches out with hands/arms. Must be able to lift/move up to 25 pounds. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee is regularly exposed to a factory environment. The employee is occasionally exposed to fumes or airborne particles and vibration. May be exposed to loud manufacturing work environment.

At Aurora Technologies, Inc. our mission is to serve our customers beyond their expectations. With hundreds of years of combined experience, our dedicated staff has solidified this commitment through expertise and committed high standards. Aurora Technologies, Inc. is a custom machine shop leading the industry in thermosets and thermoplastics. We are seeking skilled individuals to join our team in the Quality Department on 2nd shift. The ideal candidate for this position will have experience with measuring devices such as calipers, micrometers, tape measures, and other gauges. They will also have a great understanding of basic math and geometric functions. 2nd Shift hours are from 3:30pm - 1:30am, Monday through Friday Starting rate is based on experience, $16/hr and up!! ** EARN A $500 SIGN ON BONUS WHEN YOU JOIN OUR TEAM** Job Description: Understand quality and production within company specifications, goals, and objectives. Comply with all safety and environmental rules and regulations; comply with internal ATI practices. Support all 6S and lean initiatives. Have a basic understanding of an ERP system. Interpret technical drawings. Inspect parts and determine whether they meet specifications throughout production and upon completion by using various quality gauges. Complete material certs for shipments. Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Qualifications Required Knowledge and Skills: Understanding of organizational flow within the company and inspection procedures Understanding of how to work with a team Ability to interpret standard and metric drawings Ability to understand 1st and 3rd angle projection Ability to read calipers, micrometers, tape measures, and other quality gauges effectively Basic understanding of gauge calibration Ability to understand and complete basic geometry and algebra Basic computer skills Ability to deal with problems and make decisions involving several concrete variables in standardized situations Knowledge of production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods 1+ years of experience in quality Minimum requirement of a high school diploma or GED equivalent Physical Requirements: Must be able to lift 40 lbs. Ability to sit, stand or walk for up to eight hours Ability to bend and squat Ability to pass a yearly vision test Ability to work in an environment without a controlled temperature The above declarations are not intended to be an all-inclusive list of the duties and responsibilities of the job described, nor are they intended to be such a listing of the skills and abilities required to do the job. Rather, they are intended only to describe the general nature of the job.

Are you a detail-oriented individual with a passion for aviation and a drive for success? Do you want to work for a family-owned on-demand cargo operation that fosters a positive culture and encourages internal growth? If so, we have the perfect opportunity for you! We are currently seeking a Quality Control Inspector to join our team and ensure the highest standards of safety and quality. Read on to learn more about this exciting opportunity with room for advancement. Quality Control Inspector RESPONSIBILITIES: Responsible for operation of the Quality Control/Assurance department and ensures all documentation, parts, and materials meet the FAR's. Assure that all inspections are properly performed and that the proper inspection records, reports, and forms used by the company are completed and executed prior to releasing the aircraft for return to service. Perform audits and keep a log for all contract maintenance vendors. Possess knowledge of the Company's Aircraft Maintenance Program & ability to review the maintenance program if needed. Monitors and ensures that all maintenance personnel have documented training. Establishes that calibrated tooling used in the accomplishment of maintenance is in suitable condition and has been calibrated within the established time. Assure the proper execution of a maintenance release. Guide the final acceptance of all incoming material, including new parts, supplies, and the airworthiness of articles on which work has been performed from outside vendors. Monitor company procedures and recommend changes to ensure compliance with existing Federal Aviation Regulations. Ensure the completion and accuracy of OJT forms and certificates for maintenance personnel. Oversee the training and development of maintenance personnel, ensuring all necessary documentation is completed and up to date Flight Docs Upkeep, to include Flight Docs Constraint Updates, Flight Docs Flight Time Updates, Flight Docs Non-Routines Entries and Clear, and Flight Docs Parts Install/Remove Upkeep Share Point Digital Records Archives Off-site Maintenance Control and Tech Support Technical Libraries Subscriptions adequate and up to date AD and SB compliance and verification Assist with fault troubleshooting Ability to inspect, troubleshoot, and perform repairs Ability to read, analyze and interpret technical procedures, maintenance manuals, blueprints, electrical schematics, company policy and procedures and Federal Aviation Regulations Ability to communicate effectively with verbal and written skills, including the ability to interpret documents such as safety guidelines and operating manuals Ability to perform minor maintenance on ground support equipment as needed Ability to tow aircraft Provide hands-on assistance with aircraft maintenance and servicing as needed, under appropriate supervision and in accordance with company procedures and FAA regulations. REQUIREMENTS: 5 years technical experience within a Part 135,125,121 or 145 repair station, of which at least three years are in an inspector capacity. Familiar with guidance materials under Part 43. Airframe and Power Plant license, an Inspector Authorization preferred however not required. Comprehensive knowledge of procedures for completing FAA paperwork including FAR's, FAA Orders, Advisory Circulars, Form 337, Form 8130-3, Form 8110, STC's and other pertinent paperwork. Knowledge of inspection and certification process, a general working knowledge of the various aircraft and familiarity with pertinent FAR's and technical reference materials. Ability to work within the various software applications utilized throughout the corporation. Must possess a valid driver's license and passport. Must pass background screening and airport screening. Ability to move up to 75 pounds, frequent lifting of up to 25 pounds. Ability to climb stairs and ladders. Ability to be on your feet or sit down for extended periods of time. COMPENSATION PACKAGE: • Competitive compensation - commensurate with industry, experience, and base location • Health/Dental/Vision Benefits packages with options for employee +/- dependents • 401K with company match • PTO accrual for vacation and sick time • Family-owned company with emphasis placed on work-life balance • Flexible scheduling • Frequent training and growth opportunities • Company Events Sierra West Airlines is an equal opportunity employer. We believe in creating an inclusive environment for all employees and applicants. We comply with applicable laws regarding equal opportunity and affirmative action. We provide employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We are committed to providing reasonable accommodations for applicants with disabilities and disabled veterans. If you require assistance during the application process, please contact *********************.

Job Purpose: Inspects finished products, products being processed, incoming materials, parts, and assemblies for conformance to company standards. Conducts routine and non-routine analysis of raw materials, in process and finished product, using a variety of testing devices and procedures to maintain product quality. Responsibilities include but are not limited to the following: This position is for a 2nd shift only! Proficient in the use of Inspection tools such as caliper, micrometer, height gage, optical comparator, pin and thread gages. Ability to determine if components meet specifications according to a 2D drawing. Ability to run programmed components and follow documented procedures using the CMM (Coordinate Measurement Machine) Able to make manual measurements using the CMM, such as hole locations and flatness Accept help and have the ability to learn from Senior Quality Technicians and engineering Document inspection results using FMP (receiving inspection reports, FA reports, NCMR) Post accepted components into inventory using Mass 500. Maintain proper part count for inventory control. Basic knowledge of products and production processes Follows Inspection Processes and procedures Understands all aspects of GCX quality guidelines and expectations Represent Quality Assurance during VOC inspection of finished goods Job Requirements: Ability to read and understand complex blueprints. Ability to accurately measure parts using precision hand tools. Strong communication skills. (Written and verbal English) Strong attention to details. Basic computer literacy (Microsoft Excel, Word, etc.) Basic Math & Analytic Skills.

The Quality Completions Inspector is the person who conducts the systems completion walk downs and supports Completions on punch list items, walk downs, and engineering changes. This is a skilled position with detailed knowledge of their specific craft and job specifications. This person will be working with QC, document controls, and the craft to make sure items in the field are installed per drawing and specification.

Key Accountabilities: * Accurately inspect raw materials and products visually, as well as with gauges, scales, or other measurement instruments as required and according to work instructions. * Segregate non-conforming parts or material. * Complete required documentation for work performed. * Perform data entry of work results into appropriate databases. * Perform final inspection to reconcile outgoing shipments, as required. * May be required to identify causes of non-conformance. * This is a position that works directly on the warehouse floor on or around heavy machinery. * Meet TKMNA Employee Attributes / Competencies. The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as "safety sensitive" by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements: * High school diploma or equivalent * Ability to read and write English and perform basic math problems * Ability to learn correct use of basic measurement instruments (tape measure, scales, gauges) * Basic computer knowledge to complete data entry * Attention to detail and accuracy * Ability to accurately inspect basic material, commodities, and/or processes * Safety Mindset. Preferred requirements: * Some college courses or certificates in Quality Assurance-related field of study * Prior experience using basic measurement instruments * Prior experience in a quality assurance inspection position Job Compensation Starting at $20.00 Benefits Overview We offer competitive company benefits to eligible positions, such as: * Medical, Dental, Vision Insurance * Life Insurance and Disability * Voluntary Wellness Programs * 401(k) and RRSP programs with Company Match * Paid Vacation and Holidays * Tuition Reimbursement * And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp ("TK") name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates. Company With around 480 locations in over 40 countries, thyssenkrupp Materials Services is the biggest materials distributor and service provider in the western world. The broad service spectrum offered by the materials experts enables customers to focus on their individual core business. The area of Materials Services spans two strategic areas: global materials distribution as one-stop-shop - from steel and stainless steel, tubes and pipes, nonferrous metals and specialty materials to plastics and raw materials - and tailored services in the areas of materials management and supply chain management. An extensive omnichannel architecture offers 250,000 customers worldwide cross-channel, round-the-clock access to more than 150,000 products and services. A highly efficient logistics system ensures that all requested services are smoothly integrated into customer production processes "just-in-time" or "just-in-sequence. Copper and Brass Divison Sales is a distributor and processor of aluminum, stainless steel, copper, brass, bronze and more quality materials serving markets across North America, including Canada and Mexico. By providing customers with what they want, when they need it, Copper and Brass Sales is able to help them succeed in today's challenging global business environment. The company's focus on the Aerospace, Automotive, Electrical, Medical and Oil & Gas Industries allows them to offer these market segments expertise specific to their needs. The daily commitment of its employees to provide premium service focused on the customer first has earned Copper and Brass Sales the position of a respected leader in the nonferrous metals industry for over 80 years. We value diversity Diversity promotes appreciation of all the individual strengths and differences in the workforce; it is a driver and an expression of our corporate culture. We feel companies that give equal support to all employees regardless age, disability, ethnicity, gender/gender identity or sexual orientation enjoy important competitive advantages and are more efficient. So we can harness diversity to the benefit of employees and the company. What's more, greater diversity leads to greater innovation in the company. thyssenkrupp Materials NA Inc. and the affiliated group companies and business units including Copper and Brass Sales, Engineered Plastics, Ken-Mac Metals, OnlineMetals, thyssenkrupp Steel Services, thyssenkrupp Supply Chain Services, and thyssenkrupp Materials de Mexico. Also including thyssenkrupp Materials Trading NA, LLC and thyssenkrupp Materials, LLC (Aerospace) are equal opportunity employers. Qualified applicants will receive consideration for employment without regard to age, sex, race, color, religion, national origin, genetics, disability, gender identity, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. Applicants with disabilities who require reasonable accommodation in connection with the application process are encouraged to contact us directly.

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. Review and interpret project drawings, specifications, and quality requirements. Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. Verify materials and workmanship meet the project's approved submittals and standards. Attend quality and coordination meetings as needed. Ensure that all inspection and testing records are properly documented and archived. Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). Familiarity with construction materials and laboratory/field testing procedures. Strong organizational and communication skills. Proficiency with Microsoft Office Suite and QA/QC reporting tools. Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): ACI Concrete Field Testing Technician - Grade I NICET Certification in Civil/Construction Inspection OSHA 10 or 30 Certification ISO 9001 Quality Management Systems knowledge QMS/QA-related training or certifications Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Join us for an exciting opportunity to be part of a team that values your growth, fosters innovation, and encourages a positive work-life balance. About Us PAM Transport was founded in Tontitown, Arkansas, in 1980 by Paul Allen Maestri as a 5-truck operation. In our 40+ years of being in business, we have become an international company with more than 2,200 trucks and 8,500 trailers. Our goal is to provide exceptional service to our customers, and we believe that starts with having exceptional employees who are passionate about their work. Our culture is unique in that we offer the growth opportunities of a large company, but we still maintain that “small town feel” and community here at PAM. About this opportunity This is a great opportunity to learn our operation and either start, or grow, your career in transportation! This position is responsible for thoroughly inspecting truck and trailers to ensure they are safety and compliant for operation. Pay and Schedule Tuesday to Saturday 2pm to 11pm Pay Range $17.00-$18.00. Benefits Offered Medical/Dental/Vision Insurance Other Voluntary Benefits 401K PTO Weekly Pay/Direct Deposit How will you contribute to the success of the team? Makes inspections of trailers entering and exiting the yard Inspects tires, lights, and other exterior components for safe operating conditions. Inspects trailer arriving from Mexico for damage and/or mechanical defects. Ensures the timely and authorized entrance and departure of equipment. What makes you a strong candidate for this position? Ability to work both independently and as part of a team. Basic experience trailer knowledge. Experience working in fast-paced environment. The company will provide reasonable accommodations to employees who require them to perform the essential functions of their job to the extent it does not impose an undue hardship or create a risk of harm to the employee or others. PAM Transport is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Experience a workplace where your contributions matter and where you can thrive in a supportive environment.

Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available. Pay: We pay a competitive standard flat fee per case -based on customer as well as, inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions. Job Type: Independent Contractor Qualifications We are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as, the VIITA Basic Commercial Line Inspector course or its equivalent. Full Job Description of the Loss Control Inspector: · Receives assignments electronically and reviews for inspection requirements. · Schedules the inspection appointment with the Insured by phone, email, or text. · Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed. · Interviews the Insured for operations information, ages of the building systems, etc. · Communicates inspection status through online application. · Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos). Preferred skills: 3-5 years' experience providing commercial insurance loss control inspections Understanding of commercial property and casualty lines: property, general liability, and worker's compensation Ability to work independently, manage your time effectively, and communicate well verbally and in writing Comfortable completing reports online and uploading documents Other Recommended Skills: commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius Helpful (but not required) Professional certifications: CSP, OHST, ALCM, ARM H&S Loss Control Inspections, Inc company information: We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service! We look forward to hearing from all qualified applicants!

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Dona Ana Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Job Title: Distribution Inspector 3Location: Rio Grande Valley Service Area/El Paso Service AreaKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Eaton's ES AMER ARS PDCAD division is currently seeking a Quality Inspector. The hourly rate for this position is $19.76 per hour. This position is also eligible for a variable incentive program. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Eaton's PDCA Power Distribution Control Assembly division in El Paso is seeking for a Quality Inspector. The Quality inspector will verify correct wiring, components, program controllers, and conduct electrical testing of switchboard nproducts and components, as required, per applicable test procedure and/or component literature with the overall ngoal of timely order fulfillment and adherence to Eaton's quality standards. ESSENTIAL FUNCTIONS: Inspect and Hi-Pot switchboard product produced on all lines, according to inspection work instructions and in accordance with applicable governmental requirements, to confirm proper function of switchboards and electrical components, identify any product non-conformances, and ensure it meets customer specification, safety and quality requirements. Document inspections made on applicable checklist. Use Hi-Pot, continuity test, and component-specific testing devices to perform electrical testing. Verify switches and circuit breakers function properly. Verify torqued connections using torque wrench, per inspection instructions. Conduct electrical and mechanical tests per safety and training requirements and procedures. (Hi-Pot) Examine and verify mating structures (all structures in a line-up) as necessary to ensure that job is complete and field installation is problem-free (i.e. splice plate dimensions, kirk key coordination, etc). Verify that any revisions released to the production floor regarding functionality and customer specifications are incorporated into the product, all documentation reflects the current revision, and previous revisions of documents are not used / discarded. (Process and Update paperwork accurately - POM, test reports, etc.) Thoroughly document and communicate non-conformances, which are critical quality records, and verify required rework to aid problem solving and continuous improvement efforts. Communicate design errors to appropriate front-end personnel for correction, obtain revisions, and verify required rework. Serve as informal trainer for production associates, communicate well with other associates, and build positive relationships that support job objectives and teamwork. Helping particularly for complex tasks and for product requirements that may not be precisely defined (i.e. barrier placement). Troubleshoot, update, develop test setups and new procedures when current procedures are inaccurate Qualifications: Basic Qualifications: Must have a High school diploma or equivalent from an accredited institution. Minimum of 6 months manufacturing, production, or military experience OR a degree in a technical discipline Must be legally authorized to work in the United States without company sponsorship. No relocation benefit is offered for this position. Only candidates residing within the immediate area of the Eaton El Paso, TX facility (50-mile radius) will be considered for this position. Preferred Qualifications: Two or more years of experience in a Quality or Inspector position in a manufacturing environment. Experience in switchboard assembly. Computer literate. Working knowledge of Lean concepts. Associate degree in Mechatronics, Electrical Engineering or Electronics. POSITION CRITERA: Candidate must be able to travel outside of the continental United States including, but not limited to, the Puerto Rico, Dominican Republic, Mexico and Canada Skills: Strong verbal and written communication skills, persuasive skills, and analytical problem-solving skills. Work with individuals and groups to effectively participate within a team environment. Knowledge of basic electricity, current flow, and component functionality schematics/wiring diagrams and assembly processes on all lines. (Hi-Pot, Shunt Trip). Knowledge of all assembled SWBD product designs (i.e. PRL-C, PRL-I, IFS, FDS, MF, etc.) Experience in applicable UL codes, NEC codes, regional utility codes, customer-specific requirements. Ability to read, comprehend, and interpret manufacturing documents, including front view, MIs, Blow-Thru, Wiring Diagrams, component literature, engineering drawings, and testing procedures. Requires thorough knowledge of basic electricity, current flow and component functionality

Job DescriptionSalary: Are you a detail-oriented individual with a passion for aviation and a drive for success? Do you want to work for a family-owned on-demand cargo operation that fosters a positive culture and encourages internal growth? If so, we have the perfect opportunity for you! We are currently seeking a Quality Control Inspector to join our team and ensure the highest standards of safety and quality. Read on to learn more about this exciting opportunity with room for advancement. Quality Control Inspector RESPONSIBILITIES: Responsible for operation of the Quality Control/Assurance department and ensures all documentation, parts, and materials meet the FARs. Assure that all inspections are properly performed and that the proper inspection records, reports, and forms used by the company are completed and executed prior to releasing the aircraft for return to service. Perform audits and keep a log for all contract maintenance vendors. Possess knowledge of the Companys Aircraft Maintenance Program & ability to review the maintenance program if needed. Monitors and ensures that all maintenance personnel have documented training. Establishes that calibrated tooling used in the accomplishment of maintenance is in suitable condition and has been calibrated within the established time. Assure the proper execution of a maintenance release. Guide the final acceptance of all incoming material, including new parts, supplies, and the airworthiness of articles on which work has been performed from outside vendors. Monitor company procedures and recommend changes to ensure compliance with existing Federal Aviation Regulations. Ensure the completion and accuracy of OJT forms and certificates for maintenance personnel. Oversee the training and development of maintenance personnel, ensuring all necessary documentation is completed and up to date Flight Docs Upkeep, to include Flight Docs Constraint Updates, Flight Docs Flight Time Updates, Flight Docs Non-Routines Entries and Clear, and Flight Docs Parts Install/Remove Upkeep Share Point Digital Records Archives Off-site Maintenance Control and Tech Support Technical Libraries Subscriptions adequate and up to date AD and SB compliance and verification Assist with fault troubleshooting Ability to inspect, troubleshoot, and perform repairs Ability to read, analyze and interpret technical procedures, maintenance manuals, blueprints, electrical schematics, company policy and procedures and Federal Aviation Regulations Ability to communicate effectively with verbal and written skills, including the ability to interpret documents such as safety guidelines and operating manuals Ability to perform minor maintenance on ground support equipment as needed Ability to tow aircraft Provide hands-on assistance with aircraft maintenance and servicing as needed, under appropriate supervision and in accordance with company procedures and FAA regulations. REQUIREMENTS: 5 years technical experience within a Part 135,125,121 or 145 repair station, of which at least three years are in an inspector capacity. Familiar with guidance materials under Part 43. Airframe and Power Plant license, an Inspector Authorization preferred however not required. Comprehensive knowledge of procedures for completing FAA paperwork including FARs, FAA Orders, Advisory Circulars, Form 337, Form 8130-3, Form 8110, STCs and other pertinent paperwork. Knowledge of inspection and certification process, a general working knowledge of the various aircraft and familiarity with pertinent FARs and technical reference materials. Ability to work within the various software applications utilized throughout the corporation. Must possess a valid driver's license and passport. Must pass background screening and airport screening. Ability to move up to 75 pounds, frequent lifting of up to 25 pounds. Ability to climb stairs and ladders. Ability to be on your feet or sit down for extended periods of time. COMPENSATION PACKAGE: Competitive compensation commensurate with industry, experience, and base location Health/Dental/Vision Benefits packages with options for employee +/- dependents 401K with company match PTO accrual for vacation and sick time Family-owned company with emphasis placed on work-life balance Flexible scheduling Frequent training and growth opportunities Company Events Sierra West Airlines is an equal opportunity employer. We believe in creating an inclusive environment for all employees and applicants. We comply with applicable laws regarding equal opportunity and affirmative action. We provide employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We are committed to providing reasonable accommodations for applicants with disabilities and disabled veterans. If you require assistance during the application process, please contact *********************.