Inspector jobs in Florence-Graham, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Quality Control Inspector Needed in Camarillo Direct Hire Industry: BioTech, Pharmaceuticals Pay range: $23 - $24/hour Monday - Friday 7am - 3:30pm Must Have * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Job Summary Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Essential Functions * Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; * Conduct inspection and testing related to: ► Incoming product. ► First article. ► In-process. ► Final. * Initiate nonconformance reports (NCR). * Performs all aspects of testing related to manufacturing. o Incoming inspections o In-process inspection. o Final Inspection release of finished goods. o Document review. o Supports cross functional departments investigate potential non-conformance's observed * Ensures that all inspections and procedures are properly completed and documented. * Perform pre and post-inspection of product gamma irradiation process. * Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. * Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations * Prepare and submit Metrics reports to the quality supervisor or QC lead * Comply with all safety requirements ensuring work areas meet standards. * May be required to report to multiple facilities within a 2-mile radius. * Job Order document review and release * Other duties as assigned Education * High School Diploma or equivalent with 2 years of experience in quality control inspections. Required Experience & Competencies * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. * Solid organizational and planning skills required. * Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. * Must be able to work effectively and efficiently in a team environment. * Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. * Must display personal accountability for results and integrity. * Must display eagerness to learn and continuously improve. * Must have uncompromising dedication to quality. * Good general mathematical skills. * General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges * General computer skills. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Fenagh Engineering and Testing is seeking a CWI Inspector with NDT to perform inspections for the shop/field. To include the following: audits, inspecting structural steel fabrication and erection, material identification, welding to include joint fit-up, in-process welding, completed welding, MT & UT as required by code, and high-strength bolting inspections. Ideally this candidate will be an AWS CWI with either their Level I or Level II UT/MT certification from an ASNT Level III. Evaluation from our Level III for both UT (shear wave)/MT will be conducted upon hiring. The position will be supporting clients in the Los Angeles area. ICC / CWI / NDT - MT & UT Level II General Responsibilities: Perform observation and inspection in the shop & field. Collect MTR's for heat numbers and tracking. VT on members in progress. UT CJP's as needed. MT Fillet Welds as needed. High-strength bolting inspections & tests. Compile daily reports outlining inspections and reporting deficiencies (if any). Read and understand specific project plans and specifications. Communicate with project team regarding project requirements and inspection results. Requirements: AWS CWI Certification Level I or Level II UT (Shear wave). Level I or Level II MT. ICC Structural Steel & Bolting. Minimum 5 years of experience. High School Diploma or equivalent. General computer knowledge (Excel, Word, PDF). Able to travel to various locations. Benefits include company paid holidays, sick days, 2 weeks paid vacation, 100% health insurance premium, matching 401k plan. Salary is negotiable according to experience. We have a great culture defined as: Detail-oriented -- quality and precision-focused. Innovative -- innovative and risk-taking. Outcome-oriented -- results-focused with strong performance culture.

D'Leon Consulting Engineers is seeking a Construction Inspector in Los Angeles, CA. Responsibilities Perform inspection of runway and taxiway construction activities including FAA P-501 PCCP slip form and side form paving operations, ensuring compliance with specialized concrete paving equipment practices, vibration setup, paver speed, screed inspection, finishing, and surface treatment requirements. Conduct comprehensive inspections of FAA P-401 asphalt placement and compaction activities, including air-void testing, surface defect repair, release agent application, and cold milling, patching, profiling, and grade correction operations. Inspect installation and testing of FAA P-201 base material and P-306 lean concrete base systems, including earthwork operations, soil import/export activities, subgrade preparation, and temporary erosion and drainage control setup and compliance. Apply extensive knowledge of FAA active airfield work rules and protocols, including barricades, fencing, lighting, signage, pavement markings, FAA 7460 compliance, and vehicle service road requirements for both reflective and non-reflective runway/taxiway signage systems. Ensure compliance with FOD controls and active airfield protocols, including dust control, sweeping procedures, airport security and escorting protocols, and FAA vehicle marking/identification requirements across all operational areas. Inspect FAA airfield lighting systems including taxiway edge, centerline, TDZ, hold bar, and status lights, ensuring proper series circuits and regulator functionality throughout all installation phases. Coordinate opening and closing of active runways and taxiways using proper radio protocol and multi-group coordination procedures, maintaining operational safety and efficiency standards. Prepare detailed daily inspection reports with comprehensive mapping, video/photo documentation, and accurate quantity tracking that clearly documents construction activities, deficiencies, and compliance issues in a timely manner. Perform batch plant inspections for both PCCP and asphalt materials, interpret complex underground utility plans, read survey data, and perform calculations for inspection and quantity verification including line and grade requirements. Apply knowledge of project sustainability requirements and enforce LAWA's mandatory MMRP requirements while maintaining availability for all shifts including nights and weekends as operational demands require. Qualifications High school diploma (or equivalent) Current City of Los Angeles Deputy Inspector Licenses; Grading, Concrete, desired. 30-hour Cal-OSHA training prior to assignment. The 30-hour training will have been received within the last 4 years Computer Proficiency - Utilize electronic equipment to review project plans and contract documents including RFIs, submittals, and change orders. Working and operational knowledge of Project Management Information Systems (PMIS) used for inspection reporting and document control. Microsoft Office, Microsoft Outlook, Adobe Pro, PM Web, Bluebeam, ProCore, etc.. D'Leon Consulting Engineers is an equal opportunity employer committed to fostering an inclusive and respectful workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

The CNC Technical Leader will oversee and guide the technical direction of PAM's (Precision Waterjet is now Precision Advanced Machining) CNC operations. This role blends engineering strategy with hands-on process leadership - defining tooling standards, evaluating machine lifecycle performance, and supporting programming excellence. It is ideal for a senior-level machinist or programmer who has evolved into technical leadership and thrives on continuous improvement, not people management. Responsibilities - Develop and standardize programming and machining processes across the facility - Define tool families, monitor tool life, and set replacement protocols - Collaborate with programmers and setup teams to optimize machine performance - Evaluate and improve machine tolerance and lifecycle management practices - Guide technical decisions balancing efficiency, quality, and consistency Qualifications - 10+ years of CNC machining or programming experience - Mechanical or Manufacturing Engineering background preferred - Experience leading technical strategy for machining operations - Strong understanding of tooling systems, workholding, and process development - Comfortable working hands-on with machines and operators Work Location: In person

Job Posting Start Date 10-31-2025 Job Posting End Date 12-19-2025 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana CA. Reporting to the Quality Assurance Manager, the Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. Shift: Monday-Friday 6:00AM-2:45PM What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, services, and solutions for the LNG and industrial gases industry. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with over $1.5 B in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange. Nikkiso ACD is an engineering and manufacturing company specializing in machinery designed to operate at cryogenic temperatures as low as - 420 degrees Fahrenheit, the boiling point of Liquid hydrogen. For over 50 years, Nikkiso ACD has specialized in centrifugal and reciprocating pumps as well as turbines for air separation. Nikkiso ACD has the most diversified product line in the industry covering nearly every application requiring pumps or turboexpanders. This position is based at Nikkiso ACD located in Santa Ana, CA. Job Overview The Quality Control Inspector is responsible for ensuring that all incoming materials are received accurately and routed to the appropriate departments. This position involves verifying that materials match orders, inspecting for defects or damages, and maintaining the organization of the workspace. You will play a key role in maintaining quality and ensuring that our operations run smoothly. Responsibilities Ensure all products are properly packaged, labeled, and lot controlled. Verify products against purchase orders or packing slips for accuracy. Performs visual, dimensional, and functional inspection and testing according to documented policies and procedures. Maintain ISO standards of the products and ensure that there is proper handling of inspection tools. Maintain the QA incoming and first article database. Records inspection and test data as prescribed by written instructions and procedures. Operates all associated test and measurement equipment as instructed and as documented in procedures. Develop and maintain company inspection reports through the manufacturing process. Receive inventory records, process of receiving inspection documents and all other applicable documentation in coordination with the QA department. Reporting quality anomalies to the supervisor. Manage non-conforming components, ensuring relevant departments are informed and assisting in final resolution. Read and interpret manufacturing drawings. Prepare non-conformance reports, as necessary. May prepare and submit change requests. Documents non-conformances in Non-Conforming Material Review system. May train other Inspectors. Assists in gathering, analyzing, and trending of data. Require to keep accurate records to ensure ISO compliance and to be prepare for regular ISO audits. Other Duties: Performs work of a miscellaneous nature as required. Qualifications High school diploma or GED. Some college preferred. Minimum of 5 years' experience as an Inspection or quality technician/specialist in machine shop, foundry, or sheet metal shop. Experience in use of precision tooling/measuring devices. (Calipers, micrometers, welding gases, torque wrench, scale, measuring tape, jigs, multimeter, etc.) High-level of visual awareness and attention to detail. Advanced organizational and multitasking skills. Experience drafting reports and collating data. Ability to work alone with minimal supervision. Ability to analyze and interpret technical drawings and weld symbols. Microsoft Office 360 (Word, Excel, Outlook) Knowledge, Skills, and Abilities Good vision and hearing. Basic understanding of metrology and arithmetic. Familiarity with ERP/ MRP operating systems. Physical Demands Ability to lift, carry, push, and pull up to 50 pounds unassisted; heavier loads require assistance or a lifting device. Ability to remain on feet for prolonged periods and move around the facility without limitations. Ability to sit and work at a station for extended periods without limitations. Capable of completing tasks that involve repetitive use of hands and other body parts. Safety Expectations Maintain a clean and organized work area. Actively participate in safety improvement activities. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Environmental Safety Requirements New Employee Safety Training is required by all newly hired employees, including Safety Awareness. All safety-related training is provided and tracked by the EHS Director. Job specific training modules deemed necessary by the employee's Manager or Director will be required of all employees on an ongoing basis. Understanding and ability to safely work in a potentially explosive environment. Employees are required to wear Nikkiso provided PPE as/when needed. PPEs include safety shoes, safety glasses, face shields, FR clothing, cryogenic gloves, cryogenic apron, cut resistant gloves, safety gloves, hearing protection, hard hats, and dust masks. Failure to comply with Nikkiso safety requirements will result in disciplinary actions, up to and including termination. In compliance with the Americans with Disabilities Act of 1990, the employer will provide reasonable accommodations to meet the work environmental and physical demands listed above. Salary Range: $55,000/yr. - $65,000/yr. EEOC Statement Equal Opportunity Employer/Veterans/Disabled Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Full-time Description Shift: 2:30pm - 11:00pm Scope: Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: Perform Final Inspection on finished product to ensure compliance to customer requirements. Read customer drawings Perform measurements with measurement tools such as calipers, micrometers, and pin gages. Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding Verify acceptability of rework after completion Identify and mark non-conforming product to ensure it is not delivered Prepare standard and AS9102 First Article Reports as needed Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product Complete Deliverables for Customers and ensure they are complete and accurate Complete department logs and record yield data as required Perform preventative maintenance as defined by department maintenance schedule Support other work areas or departments as required by production or management. Ability to work overtime as requested Keep work area clean and organized Requirements Essential Qualifications, Education and Experience: High school diploma or equivalent One year of PCB manufacturing experience Knowledge of IPC-6012, or IPC-6013 Knowledge of IPC-600 Strong work ethic Ability to work effectively in a team environment Physical Requirements: Prolonged periods sitting and performing visual and manual tasks. Fine motor skills Ability to use microscopes for long periods of time performing job duties ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be considered for this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Compensation: Exact compensation may vary based on skills, experience, and location. About AdvancedPCB AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features 6 total manufacturing sites: Santa Clara, our headquarters in the heart of the Silicon Valley; 2 in Southern California, 1 in Maple Grove, Minnesota, Aurora, Colorado and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making AdvancedPCB one of the largest privately held printed circuit board manufacturers in North America. Visit us! ********************************** Salary Description $18.00- $24.00

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards , as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics . Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.

Meet the Owned Brand division of REVOLVE: REVOLVE is the next-generation fashion retailer for millennial and Generation Z consumers. As a trusted, premium lifestyle brand and a go-to source for discovery and inspiration, REVOLVE delivers an engaging customer experience from a vast yet curated offering of over 45,000 products. Founded in Los Angeles in 2003 by co-CEOs, Michael Mente and Mike Karanikolas, REVOLVE's family of brands includes their luxury offering, FORWARD by Elyse Walker, and a portfolio of 24 owned brands such as Lovers + Friends, Tularosa, NBD and RAYE. The Owned Brand division within REVOLVE is an industry-leading fashion design and production house based in Los Angeles. Leveraging the power of REVOLVE's data driven merchandising, combined with raw creative talent results in an unparalleled ability to identify a specific market niches, developing brands that each have their own identity, designed with a distinct consumer interest and personality in mind. At REVOLVE the most successful team members have the thirst and creativity to redefine fashion retail for the 21st century, making REVOLVE THE leading online retail destination targeted towards Millennial and Generation Z consumers seeking premium fashion. With a team of 1,000 strong, we are a dynamic bunch that are motivated by getting the company to the next level. It's our goal to hire high-energy, diverse, bright, creative, and flexible individuals who thrive in a fast-paced work environment. In return, we promise to keep REVOLVE a company where inspired people will always thrive. Some of the sweetest perks we offer aren't in a typical benefit package like hefty discount on items we carry - as in 50% or more off retail prices, free weekly lunches, and pretty rad company parties. To take a behind the scenes look at the REVOLVE “corporate” lifestyle check out our Instagram @REVOLVEcareers or #lifeatrevolve. Are you ready to set the standard for Premium apparel? Main purpose of the Owned Brands QC Inspector role: This is a full time role for a candidate who can identify the most effective defect recovery process for each item to minimize monetary loss of defective merchandise. He or she will be heavily involved in the QC process through the speccing of garments, evaluation of garments, and providing insight on different garment issues. This is a permanent full time role for a candidate who is able to work in a fast paced, high volume, sku intensive environment while maintaining accuracy. Major Responsibilities: Essential Duties and Responsibilities include the following. Other duties may be assigned. • Accurately spec garments • Document defects into current systems • Comprehend and analyze reports to identify areas of opportunities • Effectively communicate issues to all involved parties • Communicate and interact with all cross functional departments, for pulling, mending, Returns, and any other follow ups as needed • Update QC Tracker, and other relating reports on daily basis • Minimize monetary loss of defective merchandise through defective recovery process • Identify the most effective defect recovery process for each item - RA, Restore, Sellable Defect, Other • Identify defects by inspecting defective apparel • Clearly communicate with Technical Design Team regarding defective and unacceptable merchandise • Travel as needed to the Cerritos location • Complete ad-hoc tasks and assignments as directed by management Required Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Ability to spec garments • High level of attention to detail and the ability to identify apparel construction flaws • Hands-on approach at recommending “how-to-fix” solutions quickly and efficiently • High level of apparel construction and fabrication knowledge • Strong communication, prioritizing and organizational skills • Ability to take ownership of assigned tasks and meet responsibilities without supervision • Ability to work successfully with any personality type and be a team player • Sense of urgency and ability to maintain performance quality under pressure • Flexible and adaptable to a very fast-paced environment • Must be able and willing to lift and carry up to 10 lbs., perform frequent repetitive finger, hand and wrist motions, as well as, bending, stooping, reaching, squatting, kneeling, pushing, and pulling • Must be able to sit for extended periods of time Minimum Qualifications: • Minimum 5-7 years' experience working in a QA/QC, Production or Warehouse environment required • Computer literate in Excel, Word and Email required • Technical fashion, garment construction and fabrication knowledge preferred Preferred Qualifications: • Bilingual highly preferred; proficient in English A reasonable estimate of the current base hourly/salary range is $18/hr to $19/hr. ATTENTION: After submitting your application, please check your spam folder for emails on your application status. Emails are sent from an ADP email address.

About the Role: The QC Inspector plays a critical role in ensuring that all manufactured products meet stringent quality standards and comply with industry regulations. This position involves conducting detailed inspections and tests on raw materials, in-process components, and finished goods to identify defects or deviations from specifications. The QC Inspector collaborates closely with production teams to address quality issues promptly and implements corrective actions to prevent recurrence. By maintaining accurate documentation and reporting, the inspector supports continuous improvement initiatives and helps uphold the company's reputation for excellence. Ultimately, this role ensures that only products meeting the highest quality criteria reach customers, thereby safeguarding customer satisfaction and company success. Minimum Qualifications: High school diploma or equivalent. Proven experience in quality control or inspection within a manufacturing environment. Familiarity with quality control procedures, inspection techniques, and measurement tools. Basic understanding of manufacturing processes and product specifications. Ability to read and interpret technical drawings and quality documentation. Preferred Qualifications: Certification in Quality Control or related fields (e.g., ASQ Certified Quality Inspector). Experience with statistical process control (SPC) and root cause analysis. Proficiency in using digital measurement instruments and quality management software. Knowledge of ISO 9001 or other relevant quality management systems. Strong problem-solving skills and attention to detail. Responsibilities: Perform visual and dimensional inspections of materials and products at various stages of the manufacturing process. Utilize measurement tools and testing equipment to verify product specifications and tolerances. Document inspection results accurately and report any non-conformances or quality issues to the quality control manager. Collaborate with production and engineering teams to investigate defects and implement corrective and preventive actions. Ensure compliance with company quality standards, safety regulations, and industry guidelines during all inspection activities. Maintain inspection equipment and ensure calibration is up to date to guarantee measurement accuracy. Participate in internal audits and assist in external quality audits as required. Skills: The QC Inspector applies their skills daily by meticulously examining products to ensure they meet all quality standards, using both visual assessment and precise measurement tools. Their ability to interpret technical drawings and specifications allows them to identify deviations and potential defects early in the production process. Communication skills are essential as they report findings clearly and collaborate with cross-functional teams to resolve quality issues effectively. Analytical skills support their role in conducting root cause analysis and contributing to continuous improvement efforts. Additionally, proficiency with quality management software and inspection equipment ensures accurate data recording and compliance with regulatory requirements.

Job Details Irvine, CA Full Time High School $25.00 - $25.00 HourlyDescription Job Title: Inspector, Quality Control Supervisor/Manager Title: Staff Engineer, Quality (Production Support) Job Description Summary: Responsible for supporting the Quality department with quality control activities related to the manufacture of the THV within the Leeds and Irvine production facilities. To include in-process and final inspection, labelling/packaging, documentation, and environmental monitoring. The role holder will also provide routine reports and communications to provide timely updates on inspection status. Job Responsibilities: Conduct routine testing on THV, to include functional, visual, and final inspection processes, along with supporting sterilization preparation. Perform Microbiological monitoring on ViVitro (Leeds) or BDC (Irvine) when required. Conduct Preventative Maintenance and calibration of the ViVitro (Leeds) or BDC (Irvine) equipment. Conduct audits on the in-process paperwork associated with the manufacturing process including, but not limited to: manufactured valve DHRs, Jasmine preparation and ancillary logs. Provide support to the Engineering staff by gathering data on clinical product to allow decisions to be made on functionality. Adhere to Quality System and record retention requirements. Comply with all site Health & Safety requirements. Contribute to continuous improvement efforts related to valve manufacture and inspection processes. Inspect final packaging labels and confirm they are applied correctly per the relevant standards and Work Instructions. Support other areas of the business as necessary and applicable to the role. Qualifications Required Education and Experience: A-Levels, or equivalent and substantial relevant practical experience, in science related subjects are required. Bachelor's degree in a division of Biology, Chemistry or a Biomedical related discipline is desired (Leeds). Minimum of 3-5 years' experience in Quality within the medical devices or pharmaceutical industries is desirable. Must be familiar with 21CFR820 and ISO 13485 requirements. Hands on experience with these requirements is preferred. Experience assessing products for compliance and final release is desirable. Skills and Abilities Required for This Job: Must be able to work effectively and collaborate within cross-functional teams. Must possess the ability to handle multiple tasks, with high attention to detail. Ability to file and organize records in a compliant, easily retrievable manner. Must be able to effectively articulate (verbally and in writing) results and conclusions. Must have good documentation skills. Must be able to take initiative and work autonomously with the ability to prioritize a workload.

Huish Outdoors products are fueling the human spirit for adventure by keeping people active, exploring, and enjoying the world's outdoor environments, both above and below the surface. We are a team who are passionate about what we do and who we are. Our team is made up of amazing people who are outdoor enthusiasts that embrace and drive change. Quality Control Inspector collaborates with the Production and Engineering teams and is responsible for all quality inspections for incoming and outgoing products. With attention to detail, ensure all Huish Outdoors products meet the quality standards and specifications set forth by the company. Our customers purchase our products because they demand quality. It is the Quality Control Inspector's responsibility to ensure that products and services meet the required standards and specifications. Key Responsibilities Responsible for delivering KPI's for the quality team, including but not limited to inspection turnaround times, inspection accuracy and quality assurance. Responsible for the inspections and approvals of incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting unacceptable materials. Responsible for monitoring and inspecting in-process production parts by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production. Responsible for documenting incoming, in-process, and outgoing quality inspections following the company's quality management system guidelines. Accountable for maintaining measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Accountable for maintaining a safe and healthy work environment by following standards and procedures and complying with regulations. Accountable for approving finished goods by confirming product specifications, conducting both visual and measurement tests. Accountable for ensuring returned products pass through re-work, inspection, and documentation and confirm re-work. Accountable for documenting inspection results in the Quality Management System. Create reporting and sharing results with the Quality Manager Accountable for inspecting all recalled/re-worked items to confirm specifications and approve eligibility for resale. Maintain educational opportunities and update job knowledge Other duties as assigned. Job Qualifications, Skills, and Abilities High School Diploma or GED Associate's degree in science and engineering preferred. 3-5 years related work experience in quality control. Experience working with diving gear preferred. Proficient in Microsoft Office Suite (Word, Excel, etc.). Experience using NetSuite or other ERP software preferred. Ability to read and understand engineering drawings and documents. Ability to understand standard measurements and tolerances. Ability to use measuring tools such as calipers, micrometers, pin gauges, thread gauges, etc. Proficient ability in communications with others using written and spoken English, including the ability to provide clear, constructive feedback to production staff. Knowledge and understanding of QT9 Quality Management System software preferred Expected Travel is 0% Physical Activities include periods of standing for extended periods of time and for probably long durations. May work on a computer that emulates blue light. Walking through production areas. Able to walk around in tight areas. Lifting up to 50 lbs. Use of hands for dexterity. Eye, hand coordination.

Job Posting Start Date 10-15-2025 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Quality Assurance Manager the Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Stock Room Clerk - Santa Ana, CA 5:00 AM - 1:30 PM | Monday-Friday | Temp-to-Hire $20 per hour Seeking a reliable Stock Room Clerk to handle inventory, organize materials, and support production needs. Must be computer literate and dependable. Must be able to work overtime when needed. Desired Skills and Experience Stock Room Clerk - 1st Shift Santa Ana, CA | 5:00 AM - 1:30 PM | Monday-Friday | Temp-to-Hire $20 per hour Seeking a reliable Stock Room Clerk to handle inventory, organize materials, and support production needs. Must be computer literate and dependable. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.