Inspector jobs in Greensboro, NC - 86 jobs

DESCRIPTION As a part of our Transportation Team, the Inspector will oversee construction projects to ensure conformance with all applicable plans and specifications. You will be responsible for the inspection of the contractor's methods and workmanship to ensure adherence to current quality standards as it relates to building roadways, bridges and highway structures in accordance with plans and specifications. Typical work will be on NCDOT bridge inspection and roadway inspection projects throughout the state of North Carolina. Preference will be given to candidates with structural or bridge inspection experience. PROFESSIONAL REQUIREMENTS •5+ years' experience •HS Diploma or GED •Experience in construction inspection, in bridge and/or highway •Computer skills: MS Office •NCDOT certifications •SharePlus The approximate compensation range for this position is 28.00 o 46.00 an hour. This compensation range is a good faith estimate for the position at the time of posting. Actual compensation is dependent upon factors such as education, qualifications, experience, skillset, and physical work location.

Job Description CEI Inspectors S&ME is looking for Construction Engineering and Inspection (CEI) Inspectors to support our Transportation group across North Carolina, including Asheville, Charlotte, Greensboro, Raleigh, Wilmington, and nearby regions. In this role, you'll help ensure that vital infrastructure projects-such as highways, bridges, greenways, airports, ports, and rail systems-are built to meet safety, quality, and regulatory benchmarks. Your knowledge and attention to detail will safeguard compliance and uphold excellence throughout the construction process. What You Will Do: As a CEI Inspector, you'll play a critical role in overseeing contractor activities and ensuring the successful completion of projects. You may make key technical decisions and work independently or as part of a team on projects. Monitor contractor operations to confirm projects are executed according to approved plans, specifications, and safety requirements. Supervise activities including grading, paving, bridge work, and traffic control. Evaluate erosion control practices and environmental standards, while conducting material sampling and quality assurance testing. Prepare thorough daily inspection logs, track contractor performance, and manage payment documentation. Perform calculations, record material quantities, and verify project schedules remain on track. Participate in progress and safety meetings, collaborating with contractors, engineers, and stakeholders to address challenges. Conduct DBE/EEO compliance reviews to ensure workforce inclusivity and adherence to equal opportunity standards. Pay is hourly plus overtime and commensurate with experience, with additional incentives available for candidates who hold relevant certifications. Qualifications: High school diploma or GED required. Prior experience in highway construction or inspection. A technical degree in Civil Engineering Technology or Surveying Technology may substitute for one year of experience. Active NCDOT certifications such as QMS Roadway, Conventional Density, Concrete Field Technician, Erosion Control Level II, and/or Nuclear Gauge. Strong English communication skills (oral and written). Solid math skills with knowledge of weight, volume, pressure, and measurement units. Flexibility to work variable schedules and willingness to travel as needed. Work Environment: This is a physically demanding, outdoor role requiring the use of company-issued PPE. Inspectors will work in all weather conditions, traverse uneven terrain, stand for extended periods (up to 12 hours), and lift/carry 40-50 lbs. of materials and equipment. The position involves exposure to highway traffic, heavy machinery, and active construction sites, with potential for long hours, weekends, and holidays. We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs Medical, Dental & Vision Plans with HSA and FSA options - plus no medical premium increase in 2026 Wellness Program offering $50 off per month on 2027 premiums Pet Insurance for your furry family members Ownership & Financial Perks 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution 401(k) Retirement Plan to help you plan ahead Term Life & Long-Term Care Coverage - available Spring 2026 Work-Life Balance & Career Development Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program Employee Recognition Program, $2,000 Referral Bonuses, and company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

TAT Technologies (Greensboro facility) is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies is looking for a qualified Quality Inspector (APU). This position will ensure quality is maintained through documentation, workmanship and in-process surveillance while maintaining compliance of all applicable FAR's and OEM standards pertaining to Auxiliary Power Units (APU), aviation parts, material, processes and product for TAT Technologies. Primary Job Functions: * Audit work order packages for accuracy and completeness. * Perform final inspection and return to service on products delivered to QC. * Scrap rejected parts and maintain scrap room. * Perform initial inspection on customer repair orders to gather information to have the work order opened. Additional Job Functions: * Perform receiving inspection on stockroom parts. * Participate in the monthly internal audits as directed. * Assist with build check points as needed. * Assist Calibration/Librarian technician as needed. * Other Quality related functions as directed by Crew Chief, Chief Inspector or Director of Quality

The Inspector at Cook Winston-Salem is responsible to inspect products according to regulated procedures. Responsibilities * Inspect products and or components per detailed specifications and/or drawings for quality, which includes, but is not limited to the following: - Visually, dimensionally and functionally inspect product - Determine whether the product is acceptable using prescribed standards - Complete all necessary documentation• Assist in training new employees in the department• Perform daily and weekly cleaning• Perform other duties as assigned• Ability to read, write, and understand product specifications, drawings, work orders, labels and quality forms written in English• Ability to use a variety of testing equipment including small measuring devices * Maintain regular and punctual attendance• Must maintain company quality and quantity standards Qualifications * High School Diploma or GED • Minimum 18 years of age Physical Requirements: * Must be able to perform the essential functions of the job, with or without reasonable accommodations• Majority of work is conducted in a "controlled" environment• Visual Acuity to work with small parts * Majority of day is spent sitting and walking within various departments• Ability to occasionally lift up to 10lbs 90% of day; remaining 10% able to co-carry up to 35lbs• Ability to perform fine manipulation with hands e.g. grasping, pinching pulling

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Randolph, Moore, Montgomery, Lee, Chatham Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

RK&K's Construction Management and Engineering team is currently hiring a construction inspector with interstate, roadway and bridge construction experience in the Charlotte, NC area. As a Construction Inspector with RK&K you will perform complex and routine inspections on materials, processes, safety, and documentation to ensure construction contractors conform to plans, specifications, and special provisions. Essential Functions Review drawings to prepare for the inspection Understand the design of the construction that will be inspected Document the results of the inspection and communicates to the supervisor Conduct field measurements to establish quantities for pay item documentation as well as other contract administration documentation Inspect work zones for proper traffic control setup, erosion control devices and maintenance thereof, utility coordination and right-of-way issue resolution RK&K is a full-service planning, engineering, environmental, and construction management/inspection firm serving a wide range of clients throughout the United States. Fueled by a talented and diversified staff of about 1,500 in strategically located offices, RK&K provides creative solutions to complex challenges that improve the quality of life in our communities. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Required Skills and Experience Minimum 2 years of inspection experience Valid driver's license and favorable driving record Ability to lift up to 50 pounds Preferred Skills and Experience Experience and certifications in NCDOT inspection and materials testing (earthwork, asphalt, concrete, pavement preservation and Erosion & Sedimentation Control) Experience with NCDOT's construction procedures Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

We are hiring Inspector / Packagers at our Whitsett, NC plant, located at 6900 Konica Drive immediately with a start date as soon as Monday, March 17, 2025 Daytime Shift: 6:30 am to 5:00 pm, Monday through Thursday - 4 Ten hour shifts. Must be able to stand for the duration of your shift on an assembly line. We will provide the training and the tools that you need to be successful in your position. This is a job that is fast paced, working as part of a team and there is plenty of work to accomplish. We have a great place to work with awesome employees. We have 3 positions, 40 hours a week at $12.00 an hour to start. After 60 days, if you have great attendance, a willingness to learn and work as a member of a team, you will be eligible for health insurance, Paid Time off, a 401K plan, 10 Paid Holidays and a salary increase after six months. A great Zink perk is you will always enjoy every Friday, Saturday and Sunday off. You read that correctly. You will never have to work on a weekend! We are open to hiring college students, people looking for their 1st job or anyone who is willing to work. Please apply online at ******************** No outside agencies or recruiters please. For immediate consideration, apply online ******************** or send your resume to ********************* Zink is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. No recruiters or agencies. Thank you for your interest.

The Inspector at Cook Winston-Salem is responsible to inspect products according to regulated procedures. Responsibilities • Inspect products and or components per detailed specifications and/or drawings for quality, which includes, but is not limited to the following: - Visually, dimensionally and functionally inspect product - Determine whether the product is acceptable using prescribed standards - Complete all necessary documentation • Assist in training new employees in the department • Perform daily and weekly cleaning • Perform other duties as assigned • Ability to read, write, and understand product specifications, drawings, work orders, labels and quality forms written in English • Ability to use a variety of testing equipment including small measuring devices • Maintain regular and punctual attendance • Must maintain company quality and quantity standards Qualifications • High School Diploma or GED • Minimum 18 years of age Physical Requirements: • Must be able to perform the essential functions of the job, with or without reasonable accommodations • Majority of work is conducted in a “controlled” environment • Visual Acuity to work with small parts • Majority of day is spent sitting and walking within various departments • Ability to occasionally lift up to 10lbs 90% of day; remaining 10% able to co-carry up to 35lbs • Ability to perform fine manipulation with hands e.g. grasping, pinching pulling

Discover your exciting role The primary responsibilities of this position include conducting : visual inspections, checking coating thicknesses, spark testing of all coated surfaces; repairs. All listed duties are to be conducted in accordance to Fab Tech's set standards & meet all FM criteria. Explore your tasks and responsibilities * Conduct thorough visual inspections to ensure aesthetics of all parts meet Fab Tech's high quality criteria standards * Inspector will responsible for ensuring that coating thickness of parts meet mil thickness specification * Coating inspector will spark test all coated surfaces to ensure all coated surfaces within set parameters are free of defects * Coating inspectors will also be responsible for making judgement calls determining whether product needs to be reworked/repaired * Individual will be responsible for performing manual repairs on all defected parts Show your expertise POSITION REQUIREMENTS * Minimum high school diploma or equivalent. * Ability to stand on feet for up to 10 hrs. daily * Must be able to work in a fast paced work environment * Position requires the ability to make independent decisions based on standards * Attention to detail is a must * Gloves need to be worn during all visual; spark testing procedures * Note: Must pass PFT; RFT in order to wear 7700 series respirator Personal Attributes * Independent * Dependable, determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, bending at the waist, and use of hands in this role is required * Specific vision abilities required to include close vision, and the ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the production area is usually moderately loud. The Blast department is a sectioned off area of the production floor. Various blasting, grinding, inspecting and welding tasks are performed within the Blast department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Job Description Monday - Thursday 5:00pm-5:00am with a 15% SHIFT PREMIUM! Machine Specialties, LLC is a leading contract machining and metal finishing company that designs an manufactures sophisticated, cost-effective solutions to meet our clients' most demanding challenges. Our company is located in Whitsett, NC, about 8 miles outside of Greensboro, NC. We are currently looking for a Quality Inspector to join our team. The Quality Inspector is responsible for completing final inspections prior to shipment, as well as in process inspections to support shop manufacturing. This role involves conducting inspections, testing, and documenting findings to maintain compliance with regulatory and company requirements. This is an hourly position that will report directly to the Quality Inspection Manager. Position Responsibilities Study and interpret product specifications to ensure product conformity Establish inspection plans and part acceptance criteria based on drawing requirements and customer feedback. Examine manufactured products, primarily aerospace machined parts, to ensure they parts meet all standards of presentation and quality Identify and communicate existing and potential quality issues Perform dimensional inspection on machined parts using a variety of precision metrology instruments such as height gages, micrometers, bore gages, etc. Collect and record data regarding defects Document and process nonconforming product Demonstrate flexibility within a fast-paced challenging environment Ability to coordinate, prioritize, and multitask Identify non-conforming materials and products, document discrepancies, and participate in root cause analysis and corrective action processes. Participate in continuous improvement initiatives to enhance the efficiency and effectiveness of the inspection and quality control processes. Follow all safety protocols and procedures to maintain a safe working environment. General Expectations Be responsible for the productivity and quality of your work and work performed in support of teams. Share skills, knowledge and experience so that common goals are achieved Continuously strive to develop skills and abilities Maintain schedule and communicate effectively with others Required Training/Education/Experience High school diploma or GED equivalent required Minimum 3 years inspection experience Machining experience preferred. Aerospace manufacturing experience is preferred. Must be able to pass a vision test, eyeglasses or contacts are acceptable. Equal Opportunity Employer including Veteran's/Disabilities

Job Description For 40 years, our team at Southern Fasteners & Supply, a subsidiary of Supply Technologies, has been delivering quality parts and service to a diverse base of MRO and OEM customers. We are looking for a motivated, energetic person that wants a career not just a job. We work with, and supply, many high-profile customers, so a desire to be the best you can be is important. Our growing company is a top supplier of fasteners to several Fortune 500 companies Job Summary: We are seeking a diligent and detail-oriented Quality Inspector to join our team and ensure our products meet the highest standards of quality. The Quality Inspector will be responsible for conducting inspections of products and material per the required procedures, processes and specifications, including but not limited to customer specific requirements and specifications. We are seeking a talented Quality Inspector to join our team. The Quality Inspector is responsible for the following: Responsibilities: Perform visual and dimensional inspections of fasteners to ensure compliance with specifications Utilize precision measurement tools such as calipers, micrometers and gages Identify and document any non-conformities or defects Record and analyze inspection data and prepare detailed reports Collaborate with Purchasing, Sales and Supplier to resolve quality issues Ensure adherence to all safety and quality standards and regulations Maintain a clean and organized inspection area Maintain files according to policies and procedures Proactively identify and propose process improvements to create efficiencies where possible Must Haves: High school diploma or equivalent Strong attention to detail and accuracy Strong organizational skills with the ability to maintain a clear focus on all priorities. Good understanding of quality control standards and practices Basic computer skills for data entry and report generation WE Value: Previous experience in quality inspection or quality control Ability to read and interpret blueprints and technical drawings Proven ability and experience working with data and having a high degree of accuracy Proficient communication skills both written and verbal. OUR Team Members: Do The Right Thing and we will succeed: We insist on honest and ethical behavior; We treat others respectfully; Our actions are underlined with high integrity; We partner with others who hold these same values. Go One Better to achieve greatness: We strive to do our best every day; We are curious and seek alternative viewpoints; We value innovation to deliver long-term success; We will not accept the status quo and tirelessly seek to improve. Customer First balanced with Company results: We serve our customers with a sense of urgency; We strive to anticipate our customer's needs; We work with our customers to ensure we are providing them the best solutions they value; We help to deliver the long-term success of our company. WE DO what we say: We seek clarity and understanding; We follow through on our commitments; We respectfully challenge and collaborate to achieve mutual success; Once we agree, we move forward and make no excuses. Together we win: We respect and value each other's thoughts and opinions; We make the time to develop meaningful relationships; We seek new opportunities to continuously learn: We never miss an opportunity to bring out the best in others. Make a career at SUPPLY TECHNOLOGIES: Career Development: Success starts from within, and we will help you chart your path from which you can enhance your career evolution. Supply Technologies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Job Type: Full-time Benefits: Medical insurance Health saving account Dental insurance Vision insurance Life insurance 401(k) Pension Plan Paid time off Referral program Tuition reimbursement Employee Assistance Work Location: On Site ( Winston-Salem, NC) Make a career at Southern Fasteners/Supply Technologies: Career Development: Success starts from within, and we will help you chart your path from which you can enhance your career evolution.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Quality Leader The work model for the role is: Onsite, Mebane, NC Your role and responsibilities: Conducts test protocols, as assigned, to ensure the parts, products, and systems meet specified requirements and customer expectations for incoming, manufacturing or final inspection quality, as applicable. Supports quality control needs and activities for supplier quality, production quality, testing, and validation, as applicable in the local organization. Assists in specific quality-related training, promoting a passion for quality and integrity in all actions, with a focus on result orientation. Reports quality issues data, ensuring adherence to quality management system at all stages. Collaborates in improving existing test protocols and capability, resulting in greater efficiency, and accuracy. Evaluates quantitative metrics that provide descriptive data for the determination of compliance with requirements. Trains local operational teams in quality assurance and testing routines and verifies that testing is performed as a part of the specified control plans. Qualifications for the role: Minimum 2 years of experience in a manufacturing environment. Familiarity with ISO 9001 standards preferred. Ability to read and interpret technical drawings and specifications. Skilled in using measurement and inspection tools. Experience with non-conformance documentation preferred. Understanding of manufacturing and assembly processes. Basic knowledge of statistical analysis tools. Experience with ERP or MES systems (SAP preferred). Strong attention to detail and problem-solving skills. Effective verbal and written communication skills. Ability to work collaboratively across departments. Knowledge of continuous improvement tools preferred. High school diploma or equivalent required. Legally authorized to work in the U.S. Ability to safely use a ladder and lift/push/pull up to 40 lbs. Certifications such as Certified Quality Inspector or Six Sigma Yellow/Green Belt are a plus. Why ABB? ABB's Distribution Solutions Division facilitates the efficient and reliable distribution, protection and control of power by improving electric power quality while strengthening the resilience of the grid. The Division offers segment-specific products and solutions that largely serve utilities, industry and infrastructure segments, often providing the requisite medium-voltage link between high-voltage transmission systems and low-voltage users. With ABB Ability™ enabled connected solutions at its core, the offering includes medium-voltage air- and gas-insulated switchgear (1 to 66 kilovolts), indoor and outdoor circuit breakers, reclosers, fuses, contactors, relays, instrument transformers, sensors, motor control centers, as well as low-voltage switchgear for the ANSI standard markets. What's in it for you We want you to bring your full self to work-your ideas, your energy, your ambition. You'll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe. ****************************** We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Pay= $520 monthly

Job Description TAT Technologies (Greensboro facility) is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies is looking for a qualified Quality Inspector (APU). This position will ensure quality is maintained through documentation, workmanship and in-process surveillance while maintaining compliance of all applicable FAR's and OEM standards pertaining to Auxiliary Power Units (APU), aviation parts, material, processes and product for TAT Technologies. Primary Job Functions: Audit work order packages for accuracy and completeness. Perform final inspection and return to service on products delivered to QC. Scrap rejected parts and maintain scrap room. Perform initial inspection on customer repair orders to gather information to have the work order opened. Additional Job Functions: Perform receiving inspection on stockroom parts. Participate in the monthly internal audits as directed. Assist with build check points as needed. Assist Calibration/Librarian technician as needed. Other Quality related functions as directed by Crew Chief, Chief Inspector or Director of Quality Requirements Two-year Technical school degree or higher and/or equivalent experience. Technical Degree in Aerospace advantageous. 5-years' experience in aviation components, preferred. Airframe & Powerplant (A&P) License recommended. Able to obtain Repairman Certificate within 3 months of hire date if not a current Licensed A&P Thorough working knowledge of and ability to interpret FAA regulations. Experience with FAA manuals and government forms. Proficient in the use of precision measurement equipment related to Aviation Inspection/s Excellent organizational skills are necessary. This job requires exemplary interaction skills with clients and auditors. Demonstrated oral & written communication skills and good telephone manner. Ability to operate standard office equipment and good PC skills (MS Word, Excel, Outlook & Quantum). Overtime and shift/schedule flexibility, required Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities - TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

RK&K is hiring an experienced Construction Inspector to join our Construction Engineering and Inspection (CEI) team in and around Charlotte, NC. The Construction Inspector will conduct field inspections for a wide range of Transportation, Highways and Structural construction projects in the heavy civil industry. Essential Functions As a construction inspector in RK&K's Construction / CEI division you will perform complex and routine inspections of construction to evaluate if appropriate materials and construction processes are being used; and that construction conforms to plans, specifications, and special provisions Multitask management of project assignments Conduct field inspections Use mobile devices to document work - as required in North Carolina Reviews drawings to prepare for the inspection. Understands the design of the construction that will be inspected Documents the results of the inspection and communicates to the supervisor Conducts field measurements to establish quantities for pay item documentation as well as other contract administration documentation Inspects work zones for proper traffic control setup, erosion control devices and maintenance thereof, utility coordination and right-of-way issue resolution Required Skills and Experience At least two (2) years of roadway inspection experience for highway construction methods, materials, standards and specifications Valid driver's license and favorable driving record Ability to lift up to 50 pounds Preferred Skills and Experience NCDOT Certifications preferred: NCDOT Erosion & Sediment Control Level II NCDOT Introduction to Asphalt Pavements NCDOT QMS Roadway Technician NCDOT Concrete Field Technician ACI Concrete Field Technician NCDOT ABC Sampling Technician NCDOT Borrow Pit Sampling Technician NCDOT Conventional Density Technician NICET Certifications Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

S&ME is looking for Construction Engineering and Inspection (CEI) Inspectors to support our Transportation group across North Carolina, including Asheville, Charlotte, Greensboro, Raleigh, Wilmington, and nearby regions. In this role, you'll help ensure that vital infrastructure projects-such as highways, bridges, greenways, airports, ports, and rail systems-are built to meet safety, quality, and regulatory benchmarks. Your knowledge and attention to detail will safeguard compliance and uphold excellence throughout the construction process. What You Will Do: As a CEI Inspector, you'll play a critical role in overseeing contractor activities and ensuring the successful completion of projects. You may make key technical decisions and work independently or as part of a team on projects. * Monitor contractor operations to confirm projects are executed according to approved plans, specifications, and safety requirements. * Supervise activities including grading, paving, bridge work, and traffic control. * Evaluate erosion control practices and environmental standards, while conducting material sampling and quality assurance testing. * Prepare thorough daily inspection logs, track contractor performance, and manage payment documentation. * Perform calculations, record material quantities, and verify project schedules remain on track. * Participate in progress and safety meetings, collaborating with contractors, engineers, and stakeholders to address challenges. * Conduct DBE/EEO compliance reviews to ensure workforce inclusivity and adherence to equal opportunity standards. Pay is hourly plus overtime and commensurate with experience, with additional incentives available for candidates who hold relevant certifications. Qualifications: * High school diploma or GED required. * Prior experience in highway construction or inspection. * A technical degree in Civil Engineering Technology or Surveying Technology may substitute for one year of experience. * Active NCDOT certifications such as QMS Roadway, Conventional Density, Concrete Field Technician, Erosion Control Level II, and/or Nuclear Gauge. * Strong English communication skills (oral and written). * Solid math skills with knowledge of weight, volume, pressure, and measurement units. * Flexibility to work variable schedules and willingness to travel as needed. Work Environment: This is a physically demanding, outdoor role requiring the use of company-issued PPE. Inspectors will work in all weather conditions, traverse uneven terrain, stand for extended periods (up to 12 hours), and lift/carry 40-50 lbs. of materials and equipment. The position involves exposure to highway traffic, heavy machinery, and active construction sites, with potential for long hours, weekends, and holidays. We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs * Medical, Dental & Vision Plans with HSA and FSA options - plus no medical premium increase in 2026 * Wellness Program offering $50 off per month on 2027 premiums * Pet Insurance for your furry family members Ownership & Financial Perks * 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution * 401(k) Retirement Plan to help you plan ahead * Term Life & Long-Term Care Coverage - available Spring 2026 Work-Life Balance & Career Development * Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave * Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program * Employee Recognition Program, $2,000 Referral Bonuses, and company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. #yadkinville #elkin #lewisville #mocksville

Discover your exciting role The primary responsibilities of this position include conducting : visual inspections, checking coating thicknesses, spark testing of all coated surfaces; repairs. All listed duties are to be conducted in accordance to Fab Tech's set standards & meet all FM criteria. Explore your tasks and responsibilities * Conduct thorough visual inspections to ensure aesthetics of all parts meet Fab Tech's high quality criteria standards * Inspector will responsible for ensuring that coating thickness of parts meet mil thickness specification * Coating inspector will spark test all coated surfaces to ensure all coated surfaces within set parameters are free of defects * Coating inspectors will also be responsible for making judgement calls determining whether product needs to be reworked/repaired * Individual will be responsible for performing manual repairs on all defected parts Show your expertise POSITION REQUIREMENTS * Minimum high school diploma or equivalent. * Ability to stand on feet for up to 10 hrs. daily * Must be able to work in a fast paced work environment * Position requires the ability to make independent decisions based on standards * Attention to detail is a must * Gloves need to be worn during all visual; spark testing procedures * Note: Must pass PFT; RFT in order to wear 7700 series respirator Personal Attributes * Independent * Dependable, determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, bending at the waist, and use of hands in this role is required * Specific vision abilities required to include close vision, and the ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the production area is usually moderately loud. The Blast department is a sectioned off area of the production floor. Various blasting, grinding, inspecting and welding tasks are performed within the Blast department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Forsyth, Stokes, Surry, Yadkin Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Job Description CEI Inspectors S&ME is looking for Construction Engineering and Inspection (CEI) Inspectors to support our Transportation group across North Carolina, including Asheville, Charlotte, Greensboro, Raleigh, Wilmington, and nearby regions. In this role, you'll help ensure that vital infrastructure projects-such as highways, bridges, greenways, airports, ports, and rail systems-are built to meet safety, quality, and regulatory benchmarks. Your knowledge and attention to detail will safeguard compliance and uphold excellence throughout the construction process. What You Will Do: As a CEI Inspector, you'll play a critical role in overseeing contractor activities and ensuring the successful completion of projects. You may make key technical decisions and work independently or as part of a team on projects. Monitor contractor operations to confirm projects are executed according to approved plans, specifications, and safety requirements. Supervise activities including grading, paving, bridge work, and traffic control. Evaluate erosion control practices and environmental standards, while conducting material sampling and quality assurance testing. Prepare thorough daily inspection logs, track contractor performance, and manage payment documentation. Perform calculations, record material quantities, and verify project schedules remain on track. Participate in progress and safety meetings, collaborating with contractors, engineers, and stakeholders to address challenges. Conduct DBE/EEO compliance reviews to ensure workforce inclusivity and adherence to equal opportunity standards. Pay is hourly plus overtime and commensurate with experience, with additional incentives available for candidates who hold relevant certifications. Qualifications: High school diploma or GED required. Prior experience in highway construction or inspection. A technical degree in Civil Engineering Technology or Surveying Technology may substitute for one year of experience. Active NCDOT certifications such as QMS Roadway, Conventional Density, Concrete Field Technician, Erosion Control Level II, and/or Nuclear Gauge. Strong English communication skills (oral and written). Solid math skills with knowledge of weight, volume, pressure, and measurement units. Flexibility to work variable schedules and willingness to travel as needed. Work Environment: This is a physically demanding, outdoor role requiring the use of company-issued PPE. Inspectors will work in all weather conditions, traverse uneven terrain, stand for extended periods (up to 12 hours), and lift/carry 40-50 lbs. of materials and equipment. The position involves exposure to highway traffic, heavy machinery, and active construction sites, with potential for long hours, weekends, and holidays. We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. What We Offer: Comprehensive Health & Wellness Programs Medical, Dental & Vision Plans with HSA and FSA options - plus no medical premium increase in 2026 Wellness Program offering $50 off per month on 2027 premiums Pet Insurance for your furry family members Ownership & Financial Perks 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution 401(k) Retirement Plan to help you plan ahead Term Life & Long-Term Care Coverage - available Spring 2026 Work-Life Balance & Career Development Paid Holidays, PTO with rollover options, and Paid Maternity & Paternity Leave Mentorship & Career Development Programs, Tuition Reimbursement, and Credential Incentive Program Employee Recognition Program, $2,000 Referral Bonuses, and company vehicle & fuel card for project-based roles If you're passionate about making an impact and want to work with a firm committed to our employees and providing quality service to our clients, we'd love to hear from you! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. #yadkinville #elkin #lewisville #mocksville Job Posted by ApplicantPro