Inspector jobs in Hendersonville, TN

Job Description Hancock Claims Consultants specialize in Ladder Assist and Property Inspection Services, collaborating directly with numerous insurance agencies for efficient claims management. At Hancock, we are at the forefront of claims resolution services, offering nationwide coverage, swift and comprehensive claims inspections, and unparalleled quality and precision. Our established process ensures top-tier claims support, ranging from rapid catastrophe response to direct inspections. As a Roof Field Inspector, you'll be part of our dynamic network of independent contractors, conducting assessments on steep and high roofs, evaluating exterior and interior damage, and performing underwriting property inspections. Utilizing cutting-edge technology, our inspectors help assess property damage and prevent further harm until permanent repairs are complete. Please note: This is an Independent Contractor position. Successful Technicians possess: Ability to safely navigate and inspect any type of roof, specifically steep and high roofs Technical ability to complete inspections in varied weather conditions Professionalism Detail Oriented Strong customer service skills Empathy when dealing with insureds An entrepreneurial spirit Roofing and construction related backgrounds and/or insurance claims experience are a plus but not required Requirements: Must have a reliable Truck, Van or SUV with the ability to transport and carry at least a 32’ ladder Must have a Lidar equip device or the ability to obtain one (ex. iPad Pro/iPhone 12 pro or greater) Demonstrated knowledge of MS Office applications including Outlook and Teams HAAG Certification is a plus The ability to get any required certifications or credentials to become a part of our contractor poo Willingness and ability to travel Powered by JazzHR nHVkaox7rB

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job Details Experienced Franklin, TN Full Time High School CEI (Construction / Engineering / Inspection) Expectations Founded in 1944, Lochner is a trusted infrastructure services provider for aviation, surface transportation and water clients who need high-quality, forward-looking solutions to complex challenges. Our vision is to become a Top 100 leader in the A/E industry, centered on an agile, engaged, and empowered workforce coming together to embrace the art of the possible and make a lasting difference in our world. Are you ready to join us on this journey? As a people-centric company, Lochner's purpose is to empower our team to put their knowledge to work, enhancing communities across the US. To achieve this, we hire candidates of all experiences and skillsets because amazing things happen when people with diverse backgrounds come together to solve problems. We believe collaboration is more than a buzz word - it is a guiding principle in which every point of view is valued and heard and is the driving force in delivering our best work. At all levels of the organization, we foster an entrepreneurial spirit and culture of autonomy to advance our strategic vision and continually seek our next success story. Lochner - learn more about us Your impact: Organize and prioritize personal workload and/or the workloads of assigned subordinates using calendars, lists, and other facilitators to ensure timely and accurate completion of work. Schedule and/or coordinate the work of subordinates and subconsultants to ensure timely submission of required information. Train and mentor staff in new skills and tasks including, but not limited to, testing procedures, equipment operation, inspection procedures/duties, and other tasks as assigned. Evaluate documents including, but not limited to, estimated quantities, material certifications, test results, labor, equipment, environmental reports, submitted by subordinates or other business partners to check for accuracy and to determine compliance with departmental, state, and federal laws, rules, regulations, guidelines, processes, and procedures. Complete daily work report (DWR) to document daily activities on the project for historical tracking, audit purposes, and documentation of installed work items measured for contractor payments, according to departmental guidelines. Review daily work reports, documents, and reports of subordinates for completeness and accuracy, and if necessary, provide solutions for changes or improvements. Monitor traffic control devices to ensure appropriate placement and report roadway congestion to the appropriate authority. Who you are: A minimum of ten (10) years of experience of progressive responsibility on large construction projects such as heavy highway construction, bridge/structures construction, and paving, and the ability to provide variable solutions to civil engineering problems involving work site conditions, materials, and techniques that may deviate from plans to meet specifications and guidelines. The ability to read construction plans, contracts, standard drawings, specifications, and special provisions, to identify quantities, locations, material certification requirements, specifications, and special details, to provide technical guidance and identify errors, omissions, and potential conflicts on the project. The ability to interpret a variety of engineering and environmental rules, regulations, policies, procedures, and documentation for internal and external business partners to facilitate understanding, enhance communications, and ensure compliance. Proficient in the use of Site Manager, TDOT DWR App, LIMS, and other office productivity software including, but not limited to, MS Word, MS Excel, MS Power Point, MS Outlook, and MS TEAMS. Must maintain and keep up to date the following: Work Zone Traffic Control/Flagging, TDEC Level 1, ACI or TDOT Concrete Field Technician, TDOT HMA Certified Roadway Inspector, TDOT Soils & Aggregate Certification, and Local Government Guidelines for the Management of Federal and State Funded Transportation Projects. Company covers cost of maintaining certifications. Commitment Joining Lochner means gaining access to a comprehensive suite of benefits designed to support your health and financial well-being throughout your career. Lochner provides an extensive total rewards package that includes: Competitive Premiums for Medical, Dental, and Vision Paid Time Off and Flexible Holiday Program Company Paid Disability (includes paid Maternity Leave), and Life Insurance Health Savings Accounts (HSA) with Employer Contribution Flexible Spending Accounts (FSA) for Medical Expenses and/or Dependent Care Paid Family Leave Retirement Plan with Employer Match Flexible Work Schedules (Hybrid or Remote, when possible) Wellness Program for Physical and Mental Health Lochner Cares Non-Profit 501c3 Education and Training Assistance Employee Assistance Program Employee Discounts Paid Time Off for Charitable Acts of Service What we offer - Learn more Work Environment The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and outside weather conditions. The noise level in the work environment is usually loud. Physical Requirements The physical requirements must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, stoop, crawl, and lifting. The employee must frequently lift and/or move light equipment up to 20 pounds. Must be alert to equipment in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. Equal Employer Lochner is proudly committed to recruiting and retaining a diverse and inclusive workforce. Lochner provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. All positions at Lochner require an applicant who has accepted an employment offer to undergo pre-employment screening. Background checks include SSN/SIN validation, motor vehicle verification, education verification, employment verification, a criminal check, search against global sanctions and government watch lists, and drug test. All employment offers are contingent upon successful results of the pre-employment screening. California Privacy Policy

The Quality Welding Inspector supports the Quality Manager and manufacturing team in a structural steel fabrication facility. Inspect production welds per code and company standards. Inspect fit up and individual parts for dimensional acceptability. Inspect coatings and finished product prior to shipment. May inspect incoming raw materials. Mark up non-conformance items for corrections. Communicate with welders/fitters on appropriate repairs or problem areas. Monitor welding parameters for compliance. Fill out non-conformance reports and communicate with production supervision as needed. Daily reporting to Quality Manager on areas of concern, negative quality trends and written non-conformance reports.

Who are we, and what do we do? Corteva Agriscience is the only major agriscience company in the world completely dedicated to agriculture. Our purpose is to enrich the lives of those who produce and those who consume, ensuring progress for generation to come. Our inspiration is to be a market shaper, driving the next generation of agriculture products that help farms and farmers flourish and through partnering with society becoming the most trusted partner in the global agriculture and food community. With a global footprint and over 20,000 employees, Corteva is building the future of agriculture and leading breakthroughs in the innovation and application of science and technology that will better the lives of people all over the world and fuel the progress of humankind. The Precision Phenotyping Team within the Seed Product Development Group is seeking a Post-Doctoral Candidate who can drive new precision phenotyping science from concept to deployment. This individual must be willing to focus on a recalcitrant issue and persist until a solution is found. Our group develops precision phenotyping solutions aligned with plant breeding challenges, specifically investigating new precision phenotyping technologies related to drones, RGB, multi-spectral, hyperspectral, proximal, LiDAR, robotics, satellites, and any number of other technologies associated with precision phenotyping and digital solutions. The incumbent must creatively adapt new precision phenotyping solutions and generate and execute science plans related to specific phenotyping targets. What Skills You Need: PhD in Plant Breeding, Genetics, Agronomy, Phenomics, Engineering, or related fields. Be self-motivated to advance projects and work collaboratively on larger team projects. Be willing to learn and embrace new challenges in the phenotyping space. Communicate well, both verbally and written, including peer-reviewed publications as appropriate. Keep detailed and organized records of experimental protocols and results. Analyze results, troubleshoot technical difficulties, and implement solutions. Adhere to safety requirements. An ability to work both independently and across dynamic teams is critical. Experience with machine learning image processing, statistics, and novel precision phenotyping tools is highly desirable. Experience collecting phenotyping data in the field is also favorable.

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Allen, Barren, Butler, Edmonson, Grayson, Hart, Logan, Simpson, Warren Inspection Vol. per Month: 27, 17, 3, 6, 13, 5, 13, 9, 55 Preferred Experience: We are looking for knowledgeable and experienced inspectors: Aspen Grove ABC# Have used at least one of the industry standard smart phone apps: InspectorADE (what GIS uses), EZ Inspections or SafeView inspect Currently conducting occupancy inspections (or have in the past) Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walkthrough or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Valid US drivers license Aspen Grove ABC # Computer with an internet connection Fuel efficient vehicle iPhone or Android Printer Office supplies (paper, envelopes, ink) HUD keys (set of 11) Daylight hour availability Volt stick (preferred) Pay and Hours: Set rate per inspection is estimated at $15-$20+ per hour based on the number of inspections performed **This will vary depending on location, volume and efficiency.** Inspections are paid out every Friday by direct deposit for work completed the prior week Depending on the territory you should expect to work 5-15+ hours per week The job is a 1099 Independent Contractor position

Luttrell Staffing has the best jobs in town! Now hiring Quality Control Inspector positions in Spring Hill, TN. No Experience Needed - Apply Today! Details & Benefits for Quality Control Inspector: $17.43 - $17.98 PER HOUR Primary Role: Inspect final parts Paid weekly Read blueprints and specifications to understand product requirements and standards Inspect, test, or measure materials and products at various stages of production using tools such as calipers, gauges, and micrometers to ensure they meet quality standards Monitor production operations to ensure they comply with established quality and safety standards and recommend adjustments to processes if necessary Document inspection results, report defects or deviations, and suggest corrective actions to improve product quality Qualifications for Quality Control Inspector: Able to lift up to 50 lbs High School Diploma / GED Drug screen, Background check If you have the experience and skills we're looking for, apply to Luttrell Staffing today! Call or text (615) 810-9517. We are an equal-opportunity employer.

, Inc: Crafted in America since 1973, Wil-Ro, Inc. manufactures the highest-quality truck bodies for landscaping, hauling, construction, equipment distribution, and farming. Headquartered in Gallatin, Tennessee, Wil-Ro serves customers and distributor partners nationwide. Wil-Ro is an award-winner of The Tennessean's Top Workplaces 2021 - 2023. Requirements: Full-time, Monday - Friday. This team member will primarily be hands-on, working on the factory floor and interacting with the production team. There are some office and administrative requirements, but these will be limited. Responsible for conducting quality assurance inspections at various designated stages in the production cycle to ensure delivery of a premier product. Identify and address quality issues within respective production departments and remediate the issue, through root cause analysis and corrective actions. Mentor and develop team members to meet quality expectations while staying within standard production hours. Inspect materials prior to unloading to ensure they meet production standards. Implement strategies to improve product quality. Record and track warranty spend (materials and labor) with the goal of minimizing total spend. Develop and distribute reports (daily / weekly) that track and measure quality. Experience in consumer or industrial product manufacturing preferred. Pay Information Pay will be based on experience. Benefits Company sponsored 401(k) plan; 100% match up to 6% of salary (after one year) Medical, dental, vision plan - 50% sponsored (employee only) by Wil-Ro, Inc. (after 90 days) Life insurance, 100% paid by company (after 90 days) Disability insurance, 50% paid by company (after 90 days) Annual reimbursement for eye exam and prescription eye glasses Supplemental insurance; short and long term disability available (after 90 days) Paid vacation; 10 days annually/80 hours Paid holidays; 9 days annually Paid personal days; 4 days annually (2 @90 days; 2 @180 days) Tuition reimbursement (up to the federal limit after 90 days) Gym membership reimbursement (50% or up to 40/month after 90 days) Paid volunteer day; 1 day annually Company provided uniforms Maternity/paternity leave, paid (after 90 days) Team member referral program (up to $1250 for referring team member) Team member truck body purchase program (after 90 days)

Signature Homes is an employee-owned company in Birmingham, AL, and Nashville, TN. Our company mission is to enhance our homeowners' lives by creating great communities, understanding their lifestyles, and providing a world-class building experience. We are a company full of passionate, hard-working people who focus on teamwork, serving our customers, and constantly innovating our product. Signature Homes is currently seeking a Quality Assurance Framing Inspector in our Nashville, TN market. This position will manage the overall framing process from green plate to framing inspection and the right candidate will enjoy working in a very fast paced environment. Responsibilities: Manage framer subcontractor processes and performance Schedule subcontractors to lots to be framed in coordination with builders Work closely with framing inspectors Distribute and maintain reports of inspection findings. Inspect framing for compliance with building codes and regulations. Partner with our structural department and design team to ensure house is framed according to house specifications Review and approve all framing invoices for accuracy Inspect subcontractor framing to confirm it meets Signature Homes high quality standards Qualifications: High School Diploma or equivalent required. Knowledge of construction, engineering, and building codes and regulations. Ability to read and interpret blueprints Must be physically able to inspect construction sites including walking properties. Proficient with Microsoft office suite. 3+ years of residential construction experience required. The person in this role will be self-driven, have excellent time management skills, be detail oriented and can interact with customers, sub-contractors, and employees in a professional manner.

Job Description Start Strong as a Quality Inspector What’s In It for You TA Staffing is where stable work meets growth potential and everyday wins. Steady, Weekly Pay:Get rewarded on your schedule. Comprehensive Benefits:Health, dental, vision, life insurance, and paid time off. Growth Opportunities:Training to develop key leadership skills Team Bonuses:Celebrate shared success through referral and performance rewards. Smooth Onboarding:Direct deposit from day one—no waiting, no hassles. Temp to Hire Your Impact As a Quality Inspector, you ensure every product meets the highest standards before it heads out the door. Your attention to detail supports quality, safety, and customer satisfaction—making you a key player in every shift. What You’ll Do Check products carefully for quality and accuracy Use simple tools to measure, test, and track results Flag anything off-spec and help fix issues fast Keep clear records to support audits and reviews Team up with coworkers to meet daily quality goals Follow all safety procedures and inspection rules Who You Are Sharp-eyed with a focus on the details Reliable and open to learning new skills Comfortable working on your feet and lifting when needed Flexible with shifts and always on time No experience needed—just bring your work ethic! Ready to Apply? TA Staffing is hiring now for all shifts. Join a team that values precision, teamwork, and your potential. #BWGN123

General duties include checking jobs before, during and after flooring installation, measuring jobs, monitoring construction progress, ensuring job sites are ready by install date and assist coordinating repairs, utilizing office instruments and tools to verify completed work, taking photographs and maintaining a log. Responsible for inspecting completed jobs to ensure installs have been performed in compliance with company standards and ordinances. PRIMARY RESPONSIBILITIES Inspect structures to ensure they are up to standards and ordinances, before and after install. Point out violations and questionable installs. Ensure repairs or alterations are performed correctly. Visit site during first phase of construction to make initial inspection. Follow up with additional inspections during each phase. Take careful notes on what is being erected. Inspect structural quality and look for potential issues that might prevent our installers from successfully completing an installation. Draw and examine floor plans/measures to ensure proper material is ordered for installation. Inspect condition of the floors, walls, plumbing and electrical. Make final visit and green-light installation or make list of alterations Ensure concrete slab, subfloor and walls are flat. Assess the conditions of homes. Report violations of installation procedures and standards that compromise the quality of the company. Bilingual. (English/ Spanish) preferred but not required. Identification of furniture and/or appliances to be moved. Using and returning all measure/repair forms in a complete, accurate, and timely basis. Meet customers at the time established by sales reps and/or supervisor. in better shape than his son. computer literate -- can run wit htaht. Company offers an hourly pay of $20 an hour with some overtime, M-F, 7:30-4:30 with a company vehicle (clean MVR required), PTO, full benefit options, company laptop, cell and shirts provided. This is an equal opportunity employment opportunity. Person should be able to lift up to 60 pounds.

Qualifications:Deep Understanding of Primary Quality Management SystemsHighly competent with Quality Tools and MethodologiesExtensive experience with Power Point and Creation of Excel SpreadsheetsExpert Problem SolverLeader in Root Cause AnalysisExperienced in COPQ ReductionResponsibilities:Forms relationships with Customer Quality and Manufacturing teams Understands and adheres to safety guidelines in production.Proactively audits incoming material for potential issues.Provides quick feedback of issues in Customer Facility to supplier, with details and pictures that can assist supplier in quickly containing and Ensures inspection processes are followed, certified products are quickly provided to production lines and clean points are communicated and monitored.Verifies accuracy of containment data and inspection findings Maintains inventory of rejected parts for accurate RMA processing.Works with customers to establish boundaries and samples for non-conformances.Creates Work Instructions and obtains Supplier/Customer approval for Containments to ensure effectiveness.Ability to negotiate with the customer on the Suppliers behalf to reduce PPM, Scrap and present the Can present basic root cause findings/countermeasure from supplier to Customer facilities and OEMs.Attends Customer meetings, and provides feedback on clean points, part issue resolution, and data.Provides on-site support, diagnostics, and professional responsibilities for all quality issues/concerns for customer.Reports as necessary on changes in processes (internally and externally initiated) and on performance.Plans, performs, and participates in all levels of testing to help in root cause analysis Capable of performing DOE to eliminate or identify multiple potential root causes to the failure.Ensures root cause investigation tools (8D/5P) are completed, approved, and presented to Drives Corrective Action Resolution activities.Works directly with Customer/OEM engineers to assist in root cause analysis – Leads root cause.Approves 8D/5P from supplier, presents details to Customer/OEM, tracks countermeasure.Develops Effective Firewall Activities and both Supplier and Customer FacilitiesUses quality disciplines to effectively reduce COPQ.Job DescriptionForms relationships with Customer Quality and Manufacturing teams • Understands and adheres to safety guidelines in the production environment • Proactively audits incoming material for potential issues • Provides quick feedback of issues in Customer Facility to supplier, with details and pictures that can assist supplier in quickly containing and certifying product • Ensures inspection processes are followed, certified product is quickly provided to production lines and clean points are communicated and monitored • Initiates, trains personnel and helps coordinate containment/sort/rework when requested • Verifies accuracy of containment data and inspection findings • Maintains inventory of rejected parts for accurate RMA processing. • Works with customers to establish boundaries and samples for non-conformances. • Creates Work Instructions and obtains Supplier/Customer approval for Containments to ensure effective inspections. • Ability to negotiate with the customer on the Suppliers behalf to reduce PPM, Scrap and present the supplier’s position • Can present basic root cause findings/countermeasure from supplier to Customer facilities and OEMs • Attends Customer meetings, and provides feedback on clean points, part issue resolution, and data • Provides on-site support, diagnostics, and professional responsibilities for all quality issues/concerns for customer • Reports as necessary on changes in processes (internally and externally initiated) and on performance standards Plans, performs, and participates in all levels of testing to help in root cause analysis • Capable of performing DOE to eliminate or identify multiple potential root causes to the failure • Ensures root cause investigation tools (8D/5P) are completed, approved, and presented to stakeholders • Drives Corrective Action Resolution activities • Works directly with Customer/OEM engineers to assist in root cause analysis – Leads root cause analysis for supplier • Approves 8D/5P from supplier, presents details to Customer/OEM, tracks countermeasure effectiveness • Develops Effective Firewall Activities and both Supplier and Customer Facilities • Uses quality disciplines to effectively reduce COPQ Skills • Experienced Manager or Engineer within Manufacturing • Deep Understanding of Primary Quality Management Systems • Highly competent with Quality Tools and Methodologies • Extensive experience with Power Point and Creation of Excel Spreadsheets • Use of Minitab or equivalent programs • Expert Problem Solver • Leader in Root Cause Analysis • Experienced in COPQ Reduction Shift times will vary depending on current needs and will consist of 8,10,12, and or 14-hour shifts. Must have open flexibility.

Temp Immediate opening for a Quality Inspectors in the Vance, AL area. All candidates must be able to pass a pre-employment drug screen and criminal background check. * Automotive Manufacturing and/or Quality Control Experience a plus * Familiar with containment - inspection, sort and rework of components * Long term contract assignment * Fluent in spoken and written English * High school diploma or GED preferred * Must be 19 years of age or older * Must be a team player, take directions and have a sense of urgency * Mature, professional attitude, reliable transportation and professional appearance required 701 Beechcroft Rd, Spring Hill, TN 37174, United States of America

Job Title: Quality Inspector (2-2-3 Schedule) Department: Quality Control Employment Type: Full-Time, Hourly Non-Exempt The Quality Inspector is responsible for the proper set-up and operation of the assigned machine in accordance with established procedures; responsible for applying established standards in support of the Quality team to facilitate continuous improvement and ensure the highest quality product reaches the customer. Responsibilities and Duties (includes but not limited to the following): Read orders and schedules to determine setup specifications, work sequences, product dimensions, and installation procedures for machine setup and inspection. Monitor machine operation to detect malfunctions and to ensure that outputs conform to specifications. Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients. Examine, inspect, and measure raw materials and finished products to verify conformance to specifications. Separate defective products; report them to the immediate supervisor in case of product or process nonconformity. Use a variety of tools for inspection including calipers, gauges, and other testing/measurement instruments. Will perform additional duties as required. Other duties may be assigned by management, as required Qualifications and Skills: Exceptional Communication: Including active speaking / listening, reading / writing skills in accordance with standard business practices and decorum; excellent relationship building skills Critical Thinking / Troubleshooting: Using logic and reasoning to identify problems as well as the strengths and weaknesses of alternative solutions, conclusion, or approaches to problems. Details: Must have attention to details for all areas of work, especially in record-keeping and organization of projects; efficient in daily tasks Computer Skills: Basic computer skills, basic understanding of MS Office, and the ability to learn other computer programs Ethical Behavior: Must maintain the highest ethical standards in the conduct of company affairs; must conduct business with integrity and comply with all applicable laws in a manner that excludes considerations of personal advantage or gain. Education & Experience: HS diploma or equivalent is required Some college is preferred 6 months of experience as a quality inspector in a manufacturing environment strongly preferred 6 months of experience working with hazardous substances strongly preferred Required Competencies: Ability of using various scientific rules and methods to solve problems Basic knowledge of safety system analysis Ability to influence and communicate effectively with Supervisors and Associates Ability to work effectively and efficiently under pressure while managing competing demands and tight deadlines Well organized with meticulous attention to detail Expert time management skills Teamwork Orientation Work Environment/Physical Demands: While performing the duties of this job, the Quality Inspector is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. Required to climb, balance, bend, squat, reach, grasp, and hand dexterity. The Quality Inspector must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. This position may work with hazardous materials where personal protective equipment (PPE) is necessary and specific procedures must be followed to adhere to safety regulations. This position works in a manufacturing setting. This role routinely uses standard warehouse equipment such as hand trucks, box cutters and tape dispensers. While performing the duties of this job, the employee is regularly required to use hands to handle or feel; reach with hands and arms; and talk or hear. The employee is frequently required to stand; walk; and stoop, kneel, crouch or crawl. This position may work with hazardous materials where personal protective equipment (PPE), including an N95 or full face respirator, is necessary and specific procedures must be followed to adhere to safety regulations. Must pass a lead exam consisting of a medical pre-screen, PFT (Pulmonary Function Test), and a vision test. Travel: There is little travel expected with this position. Hankook & Company is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, Hankook & Company is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. This job description will be reviewed periodically as duties and responsibilities change with business necessity. All job functions are subject to modification.

Job Title: Quality Inspector (2-2-3 Schedule) Department: Quality Control Employment Type: Full-Time, Hourly Non-Exempt The Quality Inspector is responsible for the proper set-up and operation of the assigned machine in accordance with established procedures; responsible for applying established standards in support of the Quality team to facilitate continuous improvement and ensure the highest quality product reaches the customer. Responsibilities and Duties (includes but not limited to the following): Read orders and schedules to determine setup specifications, work sequences, product dimensions, and installation procedures for machine setup and inspection. Monitor machine operation to detect malfunctions and to ensure that outputs conform to specifications. Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients. Examine, inspect, and measure raw materials and finished products to verify conformance to specifications. Separate defective products; report them to the immediate supervisor in case of product or process nonconformity. Use a variety of tools for inspection including calipers, gauges, and other testing/measurement instruments. Will perform additional duties as required. Other duties may be assigned by management, as required Qualifications and Skills: Exceptional Communication: Including active speaking / listening, reading / writing skills in accordance with standard business practices and decorum; excellent relationship building skills Critical Thinking / Troubleshooting: Using logic and reasoning to identify problems as well as the strengths and weaknesses of alternative solutions, conclusion, or approaches to problems. Details: Must have attention to details for all areas of work, especially in record-keeping and organization of projects; efficient in daily tasks Computer Skills: Basic computer skills, basic understanding of MS Office, and the ability to learn other computer programs Ethical Behavior: Must maintain the highest ethical standards in the conduct of company affairs; must conduct business with integrity and comply with all applicable laws in a manner that excludes considerations of personal advantage or gain. Education & Experience: HS diploma or equivalent is required Some college is preferred 6 months of experience as a quality inspector in a manufacturing environment strongly preferred 6 months of experience working with hazardous substances strongly preferred Required Competencies: Ability of using various scientific rules and methods to solve problems Basic knowledge of safety system analysis Ability to influence and communicate effectively with Supervisors and Associates Ability to work effectively and efficiently under pressure while managing competing demands and tight deadlines Well organized with meticulous attention to detail Expert time management skills Teamwork Orientation Work Environment/Physical Demands: While performing the duties of this job, the Quality Inspector is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. Required to climb, balance, bend, squat, reach, grasp, and hand dexterity. The Quality Inspector must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. This position may work with hazardous materials where personal protective equipment (PPE) is necessary and specific procedures must be followed to adhere to safety regulations. This position works in a manufacturing setting. This role routinely uses standard warehouse equipment such as hand trucks, box cutters and tape dispensers. While performing the duties of this job, the employee is regularly required to use hands to handle or feel; reach with hands and arms; and talk or hear. The employee is frequently required to stand; walk; and stoop, kneel, crouch or crawl. This position may work with hazardous materials where personal protective equipment (PPE), including an N95 or full face respirator, is necessary and specific procedures must be followed to adhere to safety regulations. Must pass a lead exam consisting of a medical pre-screen, PFT (Pulmonary Function Test), and a vision test. Travel: There is little travel expected with this position. Hankook & Company is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, Hankook & Company is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. This job description will be reviewed periodically as duties and responsibilities change with business necessity. All job functions are subject to modification.

Are you in search of a flexible work schedule? Are you interested in earning additional income with potential for growth? Do you prefer working outdoors rather than confined to an office or warehouse? requires travel from location to location. Quiktrak is looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories or property condition assessments. When you partner with Quiktrak, you are collaborating with experienced professionals dedicated to delivering exceptional customer experiences since 1991. Over the years, we have expanded our business to become one of the industry's largest players, offering floorplan audits, data collection, inspection services, and business growth opportunities for our contractors. For more information, please visit our website: Inspecting the world one asset at a time. | Quiktrak, LLC Our most successful Inspectors share common traits such as resourcefulness, discipline, a strong work ethic, meticulous and the ability to persevere through challenges. If this description resonates with you, we encourage you to apply today. Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfortable working outdoors in various weather conditions Access to a recent smartphone or tablet to execute jobs while on site. Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Capability to stand and walk continuously for up to seven and a half hours Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours. License/Certification: Driver's License (Required) "United States Applicants Only"

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job Details Experienced Franklin, TN Full Time High School CEI (Construction / Engineering / Inspection) Expectations Founded in 1944, Lochner is a trusted infrastructure services provider for aviation, surface transportation and water clients who need high-quality, forward-looking solutions to complex challenges. Our vision is to become a Top 100 leader in the A/E industry, centered on an agile, engaged, and empowered workforce coming together to embrace the art of the possible and make a lasting difference in our world. Are you ready to join us on this journey? As a people-centric company, Lochner's purpose is to empower our team to put their knowledge to work, enhancing communities across the US. To achieve this, we hire candidates of all experiences and skillsets because amazing things happen when people with diverse backgrounds come together to solve problems. We believe collaboration is more than a buzz word - it is a guiding principle in which every point of view is valued and heard and is the driving force in delivering our best work. At all levels of the organization, we foster an entrepreneurial spirit and culture of autonomy to advance our strategic vision and continually seek our next success story. Lochner - learn more about us Your impact: Conduct construction inspections on roadway, bridges, and utility projects Conduct assignments in accordance with TDOT standard procedures and policies Provide inspection services for conformance to plans and specifications Observe, measure, and record all construction quantities for payment Perform mathematical calculations associated with quantity measurement Record field measurements in project records for review by the client or auditors Review and document project traffic control on required forms and distribute as required Inspect daily erosion control items for conformance to the plans as well as effectiveness in the field Read and interpret construction plans and specifications and resource materials to determine answers to simple inspection requirements Who you are: HS Diploma or equivalent Minimum of 4 years construction or inspection experience on roadway construction projects or completion of a 2-year engineering technology program in Roadway Construction Management Preferred to have experience on TDOT or Local Agency municipal roadway projects Valid Driver's License with a good driving record Operate under diverse outdoor conditions Ability to use construction or inspection safety equipment including fall protection Computer Skills including MS Excel, MS Word, and basic Data Entry Software Willingness to work overtime, perform nighttime construction inspection and travel up to 100 miles to jobsite Perform duties without supervision Required Certifications: Must have both of the following certifications: OSHA 10 Safety Training Work Zone Traffic Control and Flagger (or equivalent ATSSA certified courses) Must have at least 2 of the following certifications: TDOT Asphalt Roadway Paving Inspector TDOT Class 1 Concrete Technician TDOT Asphalt Plant Tech Certification TDOT Aggregate Technician TDOT Nuclear Gauge Field & Aggregate Technician Commitment Joining Lochner means gaining access to a comprehensive suite of benefits designed to support your health and financial well-being throughout your career. Lochner provides an extensive total rewards package that includes: Competitive Premiums for Medical, Dental, and Vision Paid Time Off and Flexible Holiday Program Company Paid Disability (includes paid Maternity Leave), and Life Insurance Health Savings Accounts (HSA) with Employer Contribution Flexible Spending Accounts (FSA) for Medical Expenses and/or Dependent Care Paid Family Leave Retirement Plan with Employer Match Flexible Work Schedules (Hybrid or Remote, when possible) Wellness Program for Physical and Mental Health Lochner Cares Non-Profit 501c3 Education and Training Assistance Employee Assistance Program Employee Discounts Paid Time Off for Charitable Acts of Service What we offer - Learn more Work Environment The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and outside weather conditions. The noise level in the work environment is usually loud. Physical Requirements The physical requirements must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, stoop, crawl, and lifting. The employee must frequently lift and/or move light equipment up to 20 pounds. Must be alert to equipment in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. Equal Employer Lochner is proudly committed to recruiting and retaining a diverse and inclusive workforce. Lochner provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. All positions at Lochner require an applicant who has accepted an employment offer to undergo pre-employment screening. Background checks include SSN/SIN validation, motor vehicle verification, education verification, employment verification, a criminal check, search against global sanctions and government watch lists, and drug test. All employment offers are contingent upon successful results of the pre-employment screening. California Privacy Policy

Job Title: Quality Inspector (2-2-3 Schedule)