Inspector jobs in Hoboken, NJ

The Quality Inspector will complete visual inspection of printed card assemblies and sub-assemblies. They will review paperwork, complete computer entry, read and interpret drawings and documents. They will interface with production line and visiting customers. They will also work in clean room environments. Required Skills Good written and verbal communication skills. Problem solving and analytical skills a plus. Keen attention to detail. Basic computer and math skills to measure specifications. Ability to use measuring devices such as gauges, meters, calipers and computers. Experience with workmanship specifications JSTD-001 and IPC-610 certifications required MIL-STD 38534, MIL-STD 38535 preferred EOE/Disability/Veteran This position is onsite We offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Do you enjoy working outdoors? Do you enjoy work that benefits the community by making the world a greener place? Join our dynamic team of Arborists, Engineers and Construction Management Specialists as we work together to improve the green infrastructure of NYC! We are seeking to hire multiple Landscape Construction Inspectors to join our team to work on projects for NYC Parks within the five boroughs of NYC. This position will work full-time, with intermittent opportunities for overtime. This position will utilize your technical knowledge and experience to help guide the City's tree preservation and street tree programs. As you grow with Arcadis, you will become involved with other NYC Parks' programs, and with other City agencies, all with a focus on the City's urban forest and other natural systems such as the Staten Island Bluebelt and park restoration projects. Role accountabilities: As a Landscape Construction Inspector, you will conduct daily inspections, supervise, and control construction activities to ensure the overall safety of the site, compliance with permit conditions, and coordination with other city agencies is being maintained. You will closely monitor and supervise the performance of the contractors to ensure they adhere to technical requirements and maintain a high level of responsiveness and effectiveness. Construction work includes but is not limited to excavation, tree planting, stump and tree removals, concrete restorations, and saw cutting operations. In addition, you will be responsible for conducting on-site measurements, tracking quantities, and performing design work before and during the construction process. These tasks will help you accurately assess the progress and quality of the project. You will regularly report to the resident engineer, project lead, and professional engineer (PE) overseeing the programs to keep them informed. This will ensure effective communication and decision-making throughout projects. You will be required to maintain daily, weekly, and expert tracking records, as well as responsible for verifying quantities and line items in the field with contractors and clients. Holding and attending field meetings with both the contractor and owner to discuss progress, schedules, and work remaining will be imperative to ensuring work progress proceeds in a timely manner. You will need to function as an ambassador for the city's urban forest resources during interactions with the city's residents and landowners, and will administer all health and safety (H&S) procedures as necessary. This role directly relates to construction and maintenance activities of and around NYC Street and Park Trees. Participation in a green infrastructure mentorship program is required where you will gain valuable knowledge and skills related to environmentally friendly construction practices, allowing you to contribute to sustainable and eco-conscious initiatives Qualifications & Experience: Bachelor of Science degree in forestry, arboriculture, horticulture, or related plant science field 1 or more years' of professional industry experience in tree protection, pruning, installation and establishment, or other services that directly relate to the work of the contract Skills in Microsoft 365 Suite, especially Microsoft Excel and Microsoft SharePoint. Key Skills / Attributes: Excellent communication skills both verbal and written and ability to work both independently and within a diverse team representing Arcadis and/or our client Agencies in interactions with the client, local agencies, and the community. Demonstrate a basic understanding of tree biology, tree establishment, and general landscape construction work. Proficient at reading and understanding design plans, specifications, and shop drawing submittals. Ability to be mentored and understand green infrastructure in NYC. Preferred Qualifications: ISA Certified Arborist ISA TRAQ Capital Contract Supervision Oversight Construction/Restoration Oversight OSHA 10 Certification Continue your career journey as an Arcadian. We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You do meaningful work, and no matter where your next role in Arcadis takes you, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark; on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $33.00-$36.00/HR. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location.

Inspector I Petroleum - Carteret, NJ Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an Inspector I Petroleum to join our Caleb Brett team in Carteret, NJ. This is a fantastic opportunity to grow a versatile career in the Petroleum Inspection field. Intertek is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. What are we looking for? The Inspector I Petroleum is responsible for measuring, sampling, and reporting findings on bulk petroleum and refined products. This position will travel at least 30% of the time. Shift/Schedule: Inspector will work six consecutive days, followed by two days off, on an on call / as needed basis. This includes holidays and weekends. Salary & Benefits Information The base wage or salary range for this position is $20 - $28 per hour. Individual compensation packages are based on a variety of factors unique to each candidate including skill set, experience, qualifications, and other job-related reasons. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), and more. What you'll do: Understand and adhere to Caleb Brett safety procedures. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, rail cars, tank trucks and vessels. Custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks and vessels. Perform routine equipment calibration, verification and function checks. Verify and communicate the results obtained and make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. Provide on the job assistance and receive training from more experienced inspectors. Communicate and coordinate with terminal, transport and company personnel to promote smooth exercise of duties assigned. Monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. Organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. Maintain work areas, records and equipment in a clean, organized and functional condition. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Must have grasp of basic mathematics including fractions and work in an automated environment. 0 - 6 months experience. Ability to work on an on-call basis, including weekends and holidays. Valid Driver's License and reliable driving record required. Reliable Personal Transportation Required. Work vehicle provided; business use only. Must have or be able to obtain a Transportation Worker Identification Credential (TWIC). Model Intertek's 10X Energies at all times within the workplace, practicing business the right way. Be aware of, and adhere to, safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Ability to work in fast-paced, multi-tasking environment with shifting priorities and demanding deadlines. Must be detailed-oriented and able to effectively prioritize and organize workload, with efficient time management. Ability to communicate and interact effectively in verbal written and presentation formats. Must possess the fundamental technical and administrative skills required to perform the job duties. Must be customer focused and quality driven. Ability to travel as business needs dictate. Preferred Requirements & Qualifications: TWIC credentials Some experience as a Petroleum Inspector or Sampler Intertek: Total Quality. Assured. Intertek is a world leader in the Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. With passion, pace, and precision we work to exceed our customers' expectations, while engaging with our employees to be 10X in their performance and professional growth. Intertek is a drug-free workplace. As a condition of employment, certain positions may be required to pass a pre-employment drug test based on the type of work that will be performed. We Value Diversity Intertek's network of phenomenal people are our greatest assets, and the diversity they bring fuels our success. Intertek is an Equal Employment Opportunity Employer that values inclusion and diversity. We take affirmative action to ensure all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. For individuals with disabilities who would like to request accommodation, or who need assistance applying, please email ******************* or call ************** (option #5) to speak with a member of the HR Department. #LI-CL1 * Intertek does not accept unsolicited approaches from agencies and will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Inspector I Petroleum - Carteret, NJ Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an Inspector I Petroleum to join our Caleb Brett team in Carteret, NJ. This is a fantastic opportunity to grow a versatile career in the Petroleum Inspection field. Intertek is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. What are we looking for? The Inspector I Petroleum is responsible for measuring, sampling, and reporting findings on bulk petroleum and refined products. This position will travel at least 30% of the time. Shift/Schedule: Inspector will work six consecutive days, followed by two days off, on an on call / as needed basis. This includes holidays and weekends. Salary & Benefits Information The base wage or salary range for this position is $20 - $28 per hour. Individual compensation packages are based on a variety of factors unique to each candidate including skill set, experience, qualifications, and other job-related reasons. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), and more. What you'll do: * Understand and adhere to Caleb Brett safety procedures. * Able to perform by specified methodology the below duties in addition to completing the associated paperwork. * Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, rail cars, tank trucks and vessels. * Custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks and vessels. * Perform routine equipment calibration, verification and function checks. * Verify and communicate the results obtained and make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. * Provide on the job assistance and receive training from more experienced inspectors. * Communicate and coordinate with terminal, transport and company personnel to promote smooth exercise of duties assigned. * Monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. * Organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. * Maintain work areas, records and equipment in a clean, organized and functional condition. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: * Must have grasp of basic mathematics including fractions and work in an automated environment. * 0 - 6 months experience. * Ability to work on an on-call basis, including weekends and holidays. * Valid Driver's License and reliable driving record required. * Reliable Personal Transportation Required. Work vehicle provided; business use only. * Must have or be able to obtain a Transportation Worker Identification Credential (TWIC). * Model Intertek's 10X Energies at all times within the workplace, practicing business the right way. * Be aware of, and adhere to, safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. * Ability to work in fast-paced, multi-tasking environment with shifting priorities and demanding deadlines. * Must be detailed-oriented and able to effectively prioritize and organize workload, with efficient time management. * Ability to communicate and interact effectively in verbal written and presentation formats. * Must possess the fundamental technical and administrative skills required to perform the job duties. * Must be customer focused and quality driven. * Ability to travel as business needs dictate. Preferred Requirements & Qualifications: * TWIC credentials * Some experience as a Petroleum Inspector or Sampler Intertek: Total Quality. Assured. Intertek is a world leader in the Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. With passion, pace, and precision we work to exceed our customers' expectations, while engaging with our employees to be 10X in their performance and professional growth. Intertek is a drug-free workplace. As a condition of employment, certain positions may be required to pass a pre-employment drug test based on the type of work that will be performed. We Value Diversity Intertek's network of phenomenal people are our greatest assets, and the diversity they bring fuels our success. Intertek is an Equal Employment Opportunity Employer that values inclusion and diversity. We take affirmative action to ensure all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. For individuals with disabilities who would like to request accommodation, or who need assistance applying, please email ******************* or call ************** (option #5) to speak with a member of the HR Department. #LI-CL1 * Intertek does not accept unsolicited approaches from agencies and will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

Build your career while building NYC schools! The Construction Inspection Division (CID) inspects the installation of materials and equipment on SCA projects to verify that the contractors install these systems as per the SCA plans, specifications and relevant codes. CID is organized into units as follows: Plumbing, Fire Suppression, Boiler/Fuel Burning Inspection Unit; Electrical and Heating, Ventilating, and Air Conditioning (HVAC) Unit; Roofing, Masonry and Sheet metal Inspection Unit; and the Civil, Architectural, Window and Door Inspection Unit. CID works closely with Architecture & Engineering (A&E), Construction Management and Building Code Compliance to ensure that the SCA receives a quality product. SummaryThe Technical Inspector is responsible for inspecting regulatory documentation and field construction sites/facilities to ensure compliance with relevant construction documents, codes and standards. Technical inspectors assist Project Officers by completing inspection reports that identify deficiencies in the work that needs to be corrected. Some inspectors also assist Project Officers prior to the start of construction to help clarify SCA requirements and specifications and make recommendations for improvement. Some review and accept regulatory documents required for the closeout process.Job Description Position Requires NYC Master Plumbers License Responsibilities include: Interprets complex plans and specifications; confers with Engineers, Architects and Project Officers. Assists & advises Project Management, Expediters, applicants, contractor/sub-contractors & Construction Manager's. Prepares detailed inspection reports that are transmitted to the Project Officers. Maintains computerized records of files & reports on the progress of projects (i.e., CIP and line). Inspects field construction sites/facilities to ensure compliance with relevant codes and standards and makes checks of work in progress. Makes periodic visits to projects and makes final inspection of completed work. Maintains updated information on all relevant codes, specifications, State and local laws, etc. Reviews regulatory documents required for the closeout process. Assists Plan Examiners/Engineers to achieve signoffs. Occasionally attends training in inspection techniques relating to acceptability of materials, methods, and work performed. Reviews laboratory tests to ensure that materials meet specifications; performs inspections. Performs related duties. There are seven Technical Inspector specialties: Architectural/ Civil Electrical Heating, Ventilation, Air Conditioning (HVAC) Boiler/fuel oil storage Plumbing (Requires Master Plumbers License) Roofing, Masonry, Sheet Metal Regulatory Civil Service Classification: Competitive Technical Inspector Shift Required: Evening Shift Only 12pm - 8pm Posting End Date: Open Until Filled Salary: Appointment Rate (New SCA Hire): $81,878 - $120,520 Incumbent Rate: $94,160 - $138,598 Position Requires NYC Master Plumbers License Subject to the provisions of the Collective Bargaining Agreement, the appointment rate for any newly hired employee, or employees with less than two years of active City or SCA service, shall be 15% less than the applicable incumbent rate or step. EducationHigh school diploma or its educational equivalent Certifications (if required) Work ExperienceThree years of relevant building construction experience; must have been working in any of the following areas; inspection, quality assurance, electrician, plumber, HVAC, roofing, masonry, architectural/civil, windows and doors, regulatory documentation, etc. or a satisfactory combination of education and experience. Must have three years of experience in the specialty area to which you are applying. The Plumbing specialty requires a license.(1) Architectural/ Civil;(2) Electrical;(3) Heating, Ventilation, Air Conditioning (HVAC);(4) Boiler;(5) Plumbing;(6) Regulatory. It is the policy of the New York City School Construction Authority (NYCSCA) to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, veteran status, or any other characteristic protected by federal, state, or local law. In addition, the NYCSCA will provide reasonable accommodations for qualified individuals. We offer exceptional benefits including: * Medical (100% employer paid for basic coverage available) * Prescription Drug Options * Dental & Vision Coverage * NYC Qualified Pension Plan (QPP) * Optional Retirement Savings Plans including 401K, 457 and IRA options * Transit Check Program * Public Loan Forgiveness Program * Competitive Paid Time Off (PTO) Benefits As part of our ongoing commitment to employee growth and development, the SCA's Learning and Development (L&D) program offers a variety of valuable benefits. These include tuition reimbursement for continued education that is directly related to your current role, as well as access to a broad range of individual and organizational training opportunities. Trainings on leadership development, technical skill-building, compliance, personal and professional growth. These programs are designed to strengthen performance, boost engagement, and ensure our workforce is fully equipped to meet both current and future organizational goals. The SCA is interested in qualified candidates who are eligible to work in the United States. The SCA is not able to sponsor or take over sponsorship of an employment Visa at this time. We participate in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: **********************************

Job Title: InspectorJob Description We are seeking a dedicated Inspector with a civil engineering background to join our team. The ideal candidate will have experience in inspection and testing, particularly in asphalt and soil testing. You will be involved in civil engineering design analysis and inspections, focusing on geotechnical, civil, and foundation projects. Responsibilities * Conduct civil engineering design analysis and inspections. * Track, report, and coordinate geotechnical, civil, and foundation projects with a focus on asphalt and soil testing. * Communicate effectively via phone and email with clients, consultants, and internal teams. * Report to the job site daily as needed, or to the office/lab when on-site presence is not required. Essential Skills * Civil engineering experience or background. * Proficiency in inspection and testing, especially in asphalt and soil. * Experience with nuclear density gauge, construction, and concrete testing. * Excellent reporting skills. * Possession of OSHA 10 certification. Additional Skills & Qualifications * background in civil engineering, geotechnical, design, or inspection. * Must own a car with mileage reimbursement available. Work Environment The position offers the opportunity to work on significant projects such as the Newark Terminal A and a new airport runway. We provide our staff with continuous work opportunities, ensuring engagement even during quieter periods by involving them in office tasks or lab testing. The company specializes in foundation engineering, offering design and inspection services to other engineering firms. During winter months, office work related to engineering design analysis may be available based on your background and education. Job Type & Location This is a Contract to Hire position based out of EAST ORANGE, NJ. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in EAST ORANGE,NJ. Application Deadline This position is anticipated to close on Jan 5, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

HMT has an immediate need for an API 653 certified Inspector to assist with performing inspections in accordance with API standards: Perform API 653 inspections per customer's scope of work and HMT's internal process and procedures Maintain a positive relationship between client, facility and customer Properly interpret regulations, codes and industry standards Ensure that all HMT safety policies and procedures are being followed Required Qualifications: Must hold API Certification and have API Inspection work experience. Must be technically competent and knowledgeable in the application of the current inspection codes. Preferred additional certifications: Current CPR & First Aid TWIC Card Current AOCF and or PMT III (DOT OQ) Respirator fit tested (current) Trained in OSHA 10 and or OSHA 30 JLG lift operator certification (may or may not be approved by HMT Safety Dept.) Current safety training (within the last 12 months) to include but not limited to confined space, fall protection, LOTO, HazCom, etc. About HMT: HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ's "FASTEST GROWING" Companies and Inc.'s "5000 America's Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Inspects and oversees construction of buildings, dams, utilities, walls, pavement, and other types of construction work to ensure that procedures and materials comply with plans and specifications by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Conducts pile inspections, inspections of deep dynamic compaction process Observes compacted fills (including use of nuclear density gauges) Observes utility installation, concrete testing and rebar inspection Measures distances to verify accuracy of dimensions of structural installations and layouts Performs inspections of deep dynamic compaction process Verifies levels, alignment, and elevation of installations Observes work in progress to ensure that procedures are followed and materials used conform to specifications Prepares samples of materials for laboratory testing and performs the tests Examines workmanship of finished installations for conformity to standard and approves installation Interprets blueprints and specifications for Contractor and discusses deviations from specified construction procedures to ensure compliance with regulations governing construction Records quantities of materials received or used during specified periods Maintains daily logs of construction and inspection activities and completes daily progress reports Prepares sketches of construction installations Participates in environmental audits and prepare data summaries, data tables, data mapping and presentation, and preparation of environmental reports Follows blueprints, guidelines, and/or diagrams Responsible for the operation and maintenance of equipment Assists environmental engineers in the development of remediation devices Classifies soils according to standard types Examines rocks, minerals, and fossil remains to identify and determine sequence of processes affecting development of earth Applies knowledge of chemistry, physics, biology, and mathematics to explain these phenomena and to help locate mineral, geothermal, and petroleum deposits and underground water resources Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings Prepares geologic reports and maps, interprets research data, and recommends further study or action Conducts or participates in environmental studies Directs drilling of exploratory borings and wells Oversees installation of monitoring wells in accordance with state and federal requirements Collects or supervises collection of soil and groundwater samples for analysis of chemical composition Determines direction of groundwater flow based on review of historical records and site specific data Performs environmental soil sampling Prepares summary and certification letters and reports Conducts pile and deep foundation inspections Inspects ground improvement Observes borings, test pits, geoprobes and cone penetrometer tests Conducts permeability testing and well monitoring Prepares project cost estimates, proposals, reports and mentors junior staff Works under general supervision with latitude for independent judgment Displays moderate skills with high level of proficiency Adheres to environmental, construction and OSHA safety policies and procedures to be in compliance with local, state, and federal environmental regulations Consults with senior peers on certain projects Identifies the potential for new projects and seeks opportunities to promote the company's services on an ongoing basis Travels 100% of the time which may be out of state Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Preferred Bachelor's degree from four-year college or university; or one to four years related experience and/or training with HS Diploma or GED; or equivalent combination of education and experience. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus Valid Driver's License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting Approximately 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $50,000-$70,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

We are seeking an experienced professional with a strong background in HUD, HQS, and NSPIRE inspections for Section 8 housing. The ideal candidate will also have hands-on experience with YARDI inspection modules, along with strong administrative and customer service skills. This dual-role position involves conducting property inspections and managing scheduling, coordination, and communication related to inspection activities. Key Responsibilities: Conduct inspections in accordance with HUD/HQS/NSPIRE protocols for Section 8 and other affordable housing programs. Utilize YARDI to record, update, and track inspection data and outcomes. Coordinate inspection schedules with property owners, residents, and inspectors. Perform quality control reviews and follow-up inspections as needed. Maintain detailed documentation and reports in compliance with program standards. Provide administrative support including scheduling, calendar management, data entry, and customer service communications. Respond to inquiries from clients, inspectors, and residents in a timely and professional manner. Assist with inspection training, process improvement, and compliance reporting when necessary. Qualifications: Minimum 2 years of experience performing HUD/HQS or NSPIRE inspections. Proficiency with YARDI inspection software is required. Strong understanding of Section 8 and HUD housing program requirements. Excellent administrative, organizational, and time-management skills. Strong customer service and communication abilities. Proficiency in Microsoft Office (Word, Excel, Outlook) and other web-based tools. Ability to work independently, meet deadlines, and handle multiple tasks simultaneously. Valid driver's license and reliable transportation (for field inspections). Preferred Qualifications: HQS or NSPIRE certification. Experience working with housing authorities or property management companies. Familiarity with HUD REAC or other compliance programs.

Job Title: Quality Control (QC) Inspector Company: Hansome Energy Systems Employment Type: Full-Time Hansome Energy Systems is a privately held industry leader in rotating electrical machinery, proudly supporting the U.S. Navy and other critical defense and industrial applications. We specialize in high-performance, precision-engineered equipment designed, built, and inspected to perform in the most demanding environments. Our commitment to quality, reliability, and mission readiness is the foundation of our work. Location & Facility Transition This position is currently based at our Linden, NJ facility and will be relocating to our new East Windsor, NJ facility. Candidates must be able to work in Linden during the transition and remain with the company through the move. Position Overview Hansome Energy Systems is seeking a highly detail-oriented Quality Control (QC) Inspector to ensure that mechanical and electrical components meet stringent defense and industrial quality standards. This role is critical to ensuring product reliability, regulatory compliance, and flawless execution of mission-critical equipment. The QC Inspector will perform dimensional inspections, documentation review, in-process checks, and final inspections. Key Responsibilities Perform incoming, in-process, and final inspections on mechanical, electrical, and precision-machined components. Verify parts and assemblies against drawings, specifications, and quality standards. Use precision measurement tools such as calipers, micrometers, height gauges, bore gauges, dial indicators, and other inspection equipment. Inspect for workmanship, proper assembly practices, dimensional accuracy, and material conformity. Document inspection results, discrepancies, and nonconformances clearly and accurately. Assist with root-cause investigations and corrective actions when defects are detected. Review manufacturing documentation such as travelers, work instructions, certificates of compliance, and material certifications. Ensure products meet all requirements before release to the next production stage. Collaborate closely with production, engineering, and quality teams to resolve issues. Support continuous improvement and maintain compliance with internal and external quality requirements. Qualifications Required High school diploma or equivalent. 1-3 years of experience in quality inspection or manufacturing. Strong understanding of mechanical drawings, tolerances, and inspection requirements. Proficiency with measurement tools such as calipers, micrometers, and gauges. Strong attention to detail, accuracy, and documentation skills. Ability to lift up to 50 lbs and stand for extended periods. Ability to work in Linden, NJ during the transition and relocate to East Windsor, NJ upon facility move. Must be a US Citizen Preferred Experience in defense, aerospace, or other high-reliability manufacturing environments. Familiarity with quality systems such as ISO 9001 or MIL-STD requirements. Experience with nonconformance reporting (NCR), MRB processes, or internal audits. Basic electrical knowledge or experience inspecting rotating electrical equipment. Experience with statistical process control (SPC) or advanced measurement tools (CMM, height gage, etc.). Work Environment Full-time, on-site QC inspection role. Work involves manufacturing floor, inspection stations, and documentation work areas. Exposure to shop environments, machinery, and moderate noise (with proper PPE). Quality- and safety-focused culture supporting defense and industrial programs. Benefits Competitive compensation Health, dental, and vision insurance Paid time off and holidays Retirement plan options Ongoing training and skill development Opportunity to ensure quality for products supporting U.S. Navy and critical applications How to Apply Qualified candidates are encouraged to submit their resume and/or application to the Hansome Energy Systems hiring team.

Job DescriptionBenefits: Paid time off We specialize in the manufacturing of tight tolerance medium to complex aerospace components and assemblies. We are AS9100D. Qualifications Minimum 2-5 years experience in manufacturing / job-shop environment Solid working knowledge with: blue print reading, inspection instruments, tolerancing, GD&T, etc Knowledge of Mitutoyu MiStar 555 desired. The ability to multi-task while accurately performing in-process and final inspections on CNC manufactured parts is a must Experience inspecting close tolerance parts (.001 to .0005) using inspections tools such as micrometers, linear height gage, CMM, depth mics, etc Perform job responsibilities according to internal process specifications and third-party requirements Utilize proper PPE, safety equipment, and follow safety procedures Assist support functions in root cause analysis Must be able to multi-task and work within deadlines Proactively work to improve efficiency and quality of products Use manual and automated measuring / testing equipment to assure product quality Cross-train with employees as needed based upon knowledge and experience Compliantly complete all written and/or electronic labor tracking documentation Report problems to appropriate resource and/or Coach Keep all shift operators informed on special problems involving operation or set up Communicate with team to ensure all team members are aware of product deficiencies, new processes, or issues Provide feedback to appropriate support functions Assist leading and support team initiatives We are constantly growing and always on the look-out for both experienced candidates and those looking to learn the trade. If you are a CNC programmer or operator, manual machinist or toolmaker, or you are just looking to get into the trade, please send us your resume.

TopView Sightseeing is seeking a sharp, reliable, and observant Quality Control Inspector to help maintain high service standards across our sightseeing operations, including bus, boat, and bike tours. This full-time, field-based role plays a key part in ensuring safe, high-quality experiences for thousands of daily customers across New York City. Responsibilities: Conduct undercover inspections of service quality across all TopView locations and brands Monitor employee conduct and adherence to safety protocols and company standards Perform passenger counts and compile data for internal industry analysis Inspect competitor operations and provide detailed reports Document and report inspection results, policy violations, and improvement suggestions Collaborate with operations leadership to enhance service quality Requirements: High school diploma or GED Experience in supervision, inspection, or monitoring preferred NYC tourism experience is a plus Strong attention to detail and ability to collect and report accurate data Must have a smartphone and familiarity with Google Apps Professional, trustworthy, and presentable Excellent communication skills and a proactive attitude Must be comfortable working 100% in the field, including weekends and holidays Benefits: Health insurance 401(k) Paid time off Join a fast-growing company and help shape the quality of NYC's top sightseeing experiences-apply today! Powered by JazzHR AEzMzKURVa

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program

Job DescriptionDescription: : Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program Requirements:

Join Weiss-Aug - A Leader in Precision Manufacturing and Innovation Be part of a company that's shaping the future of manufacturing where your ideas, skills, and passion matter. Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions for the medical, aerospace & defense, automotive, interconnect, telecommunications and consumer goods industries, we take pride in cultivating a collaborative and forward-thinking work environment. We're currently seeking a passionate and skilled QC Inspector - 2nd Shift to join our team and contribute to our mission of delivering high-quality, engineered solutions to our customers worldwide. In this role you perform visual and mechanical inspection of first piece, in-process, and final inspection of multiple jobs to support production. Shift Schedule: 2:00 pm - 10:30 pm Responsibilities Completes visual and mechanical inspections based on control plan, drawing, spec sheets and procedures. Able to expedite and prioritize workload. Works with die setters, engineers, and/or managers in meeting the company quality policy by providing written and verbal communication related to specifications and data in a clear concise manner. Quarantines product, performs transactions in ERP system, creates and maintains detailed records of inspections on various forms, prepares data packages for shipments. Works with QC Inspector III, engineers, or managers. Supports management initiatives to improve the efficiencies such as creating and updating key quality documents such as visual standards and inspection instructions. Requirements High School graduate or equivalent 1-3 years of inspection experience in close tolerance manufacturing Must have a good understanding of GD&T to be able to interpret part specifications. Must be able to use skillfully metrology equipment such as all hand gauges, microscopes, comparators. Must be organized and able to maintain a clean workspace. Must have the ability to use a computer with minimal training. Must be able to quickly adapt to using Microsoft and Adobe software to create key quality documents. This position is at our East Hanover, NJ location. Pay Range: $23-$26/hr Other Benefits Include Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life - Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

Full-time Description The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications. Reads written specifications or receives oral instructions and determines work aids required and inspection procedures. Measures wire/cable for size, and defects using micrometers and fixed gauges. Examines wire for defects, such as pits, scratches, and burnt surfaces. Records test results and informs supervisor when wire varies from specifications. Respools cables according to customers specification and perform final inspections of spools. Any other duties as assigned by supervisor. Requirements Six months to one year of work experience is preferred. Demonstrates ability to self-motivate and to problem solve in a fast-paced setting. Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Must be capable and willing to share knowledge and train associates. Ability to analyze data and make recommendations. Ability to troubleshoot manufacturing defects. Strong interpersonal skills. Ability to seek and accept feedback from others. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent Working conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles The noise level in the work environment is usually moderate. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

A Jersey City community is looking for a motivated and hardworking employee to oversee a Luxury Community of Several High Rise buildings and its community streets. We are looking for a full-time/ person to fill the overnight position. (11:00pm-07:00am) Responsibilities: Oversee the surveillance cameras for multiple Hi-Rise Luxury Buildings and surrounding Community Streets Secure premises by patrolling property; inspecting buildings, equipment, and access points Troubleshoot surveillance camera issues should they arise Escalate any situation that arises to the appropriate person and/or 911 Emergency Enforce establishment regulations Reporting irregularities, informing violators of policy and procedures. Act as overnight fire safety officer Requirements: Proven work experience as a security guard or relevant position, such as a First Responder Comfortability with software including ButterflyMx, Avigilon VMS, Gsuite, and Access Control High school degree and proficiency in English Surveillance skills and details orientation Physical Requirement: Ability to jog fast or run in the case of an emergency Pay Rate: $18.00/hour Benefit Package includes: Health, Dental, and Vision Insurance Paid Time Off for Holidays, Vacation, and Sick leave 401(k) Retirement Savings Plan with Employer Matching Contributions Job Type: Full-time Schedule: 11:00pm-7:00am (40 hours a week)

Job Description Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required . Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.