Inspector jobs in Homestead, FL - 203 jobs

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. Weekend Shift: Friday, Saturday, & Sunday, 7:00am - 7:00pm

Description: Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements: Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Property Inspector Start Your Career in the Field - No Experience Needed Earn $50K-$75K! Responsibilities: • Canvass neighborhoods to find old original windows, doors and damage roofing • Schedule FREE estimate appointments for windows, doors, bathrooms and roofing • Work outdoors and engage directly with homeowners Qualifications: • No experience required (We'll Train!) • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Salary, Commission & Bonus (Earn $50K to $75K per year) • 5-day work schedule (No Weekends!) • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

SHAPING A WORLD OF TRUST! Global Staffing Services is a Recruiting Processing Organization, we are recruiting candidates through the US for our client who is a business to business to society company. They are dedicated to building trust between companies, public authorities and consumers. Our client offers superior services and decisive and actionable results. Join as an Independent Contractor by leaving your mark and shaping a world of trust. Our client is hired by banks, dealerships, leasing companies and others to performs field inspections and verifications throughout the United States. Their passion is to reduce clients' risk and our independent contractors contribute to this success!As an Independent Contractor (1099) you can perform multiple contracts in a day. Contracts start at $40 and go up from there, with potential to earn more depending on your availability to schedule and accept contracts. Along with other incentives Contract Requirements Include:Traveling distances do vary depending on your location. You will conduct Automotive inspections on physical inventories. Utilizing proprietary software to complete those reports. Identifying equipment, locating Serial/VIN numbers and documenting changes and or damages. Reconcile any missing vehicles and updating records. Then submitting completed reports within a given time frame.Contractor Skills and Qualifications:Must be able to computers and mobile applications on a smartphone or tablet. Flexible schedule and available during business hours. Monday-Friday 7-6pm Reliable transportation, a valid driver's license, High School Diploma/GED and a smart phone and must have Automotive experience. This is a must have, this can be from prior Auto Inspectors, Insurance Adjustors, Mechanics, etc any field where you would need to know how to identity or determine if there is damage.Professional business appearance, demeanor, and good communication skills. Take online certifications to become familiarized with our client's expectations. and to complete the onboarding process.Transferable Experience:Automatic Mechanic, Vehicle Inspector, Insurance Adjuster, Auto Body, etc Job Types: Full-time, Part-time, ContractWork Location: A given Radius in your closest location (On the Road) Job Types: Contract, Part-time, Full-time Salary: $40.00 - $270.00 per day Benefits: Flexible schedule Day range: Monday to Friday No weekends Shift: 8 hour shift Day shift Education: High school or equivalent (Required) License/Certification: Driver's License (Required) Willingness to travel: 75% (Required) Work Location: On the roadtances. Compensation: $40.00 - $270.00 per day Global Staffing Service's objective is to provide highly qualified contract, contract-to-hire and direct-hire staff to our clients. We understand the technical requirements of the positions you need to staff and the importance of delivering a cost-effective solution in a timely manner. We custom-tailor a candidate search based on your specific needs. We will advise you on the ideal candidate profile and compensation package to attract the right people. We recruit nationwide, check references and mediate negotiations. Our particular focus includes but not limited to: (in no particular order) Executives Outside Sales Professionals Inside Sales Professionals Regional Managers Area Managers IT Professionals Finance Professionals Engineering Professionals Manufacturing Professionals Distribution Health Services We currently have over 500 positions available. Although this is a moving target, it constitutes the average number of openings at any given time.

CAP is currently looking for a Commercial Roofing Inspector with experience in the construction field. This position involves reviewing roofing applications for compliance with the code; performs roofing inspections and enforces roofing protocols. All candidates must be able to read, interpret, and apply a wide variety of technical information from manuals, drawings, specifications, layouts, blueprints, and schematics. Candidates must possess excellent oral communications skills and ability to organize information. Duties and Responsibilities: Reviews roofing applications for compliance with the code; performs roofing inspections and enforces roofing protocols. Documentation of daily construction activities. Interface with owner building officials and designers as appropriate. Meets and confers with applicants requiring plan review services for municipality building permits. Rejects incomplete or unsatisfactory submittals. Meets with municipalities, state, and federal government officials concerning matters relating to building plan review and municipality building permits. Conduct inspections of construction foundations, alterations, repairs, remodeling, or demolition of reinforced concrete, steel, masonry, wood construction and inspection of plumbing, heating, and electrical installations and the installation of building systems, when permitting is required, to ensure compliance with the Florida Building Code and any applicable local technical amendment to the Florida Building Code. Enforcement of project requirements and assuring that non-compliance situations are detected and rectified. Required Education, Experience, and Skills Must have a minimum of five (5) years experience in the construction field Knowledgeable of the Florida Building Code Building plan review and/or inspection experience is desirable. Strong structural and building background is a plus License and Certification State of Florida Commercial Roofing Inspector License State of Florida Building Inspector and/or Plan Reviewer license is desirable Salary Commensurate with experience and licensure We offer competitive compensation packages; medical, dental, and vision coverage; life insurance, short- and long-term disability insurance; 401(k); employee referral; educational reimbursement; and more. Equal Opportunity Employer / Drug Free Workplace / Veterans Our firm is committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state or local laws.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of “U.S. Person” go here: ********************************************************************************************** Security Clearance: None/Not Required Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. The NDT Technician is responsible for performing Non-Destructive Testing using liquid penetrant, and magnetic particle methods in compliance with applicable regulations and standards, including FARs, RSM, Service Bulletins, and Airworthiness Directives. This role involves evaluating inspection data, interpreting test results, and accurately documenting findings using approved documentation procedures. The technician works under general supervision and must perform duties with the technical support of a certified NDT Level III. We are looking for a proactive team player interested in professional growth. This role involves structured cross-training, allowing you to develop a deep understanding of our operations and become proficient in multiple, interdependent areas. What You Will Do: Perform NDT component inspections Set up, operate equipment, and where applicable, check and adjust/calibrate equipment and test process medium as needed to ensure valid test results. Perform routine service throughout the assigned area for upkeep, and ensure equipment operates properly. Evaluate the results of all inspections performed using NDT processes to the level of certification held. Maintain accurate records of inspection for all NDT processes. Perform process checks/audits on all materials and equipment used in NDT. Obtain and maintain Level II certification in at least one NDT discipline, demonstrating ongoing technical competency and adherence to industry standards. Support and follow all rules/guidelines/standards set by EHS, Quality, and CI functions as set by your leader and position. Assist Cell Leader/Ops Tech in meeting production goals and objectives. Actively participates in departmental cross-training to support team flexibility and ensure smooth operations based on business needs 1st Shift: 7am to 3:30pm, Mon to Fri Qualifications We Require: Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/ technical education in related discipline with a minimum of 2 years of relevant experience 1-3 years of relevant experience in an aerospace or manufacturing setting. Experience with non-destructive inspection techniques. Experience with reading detailed blueprints and/or specifications. Qualifications We Prefer: ASNT certification is preferred. Ability to obtain internal Level II FPI certification required. 3-5 years of relevant experience in an aerospace or manufacturing setting. Experience with brazing techniques and weld joints Experience with working with shop floor equipment (setup, cleaning, operation). Basic computer skills (Window based software, Word, Excel, etc.). Experience with math skills in a work setting. What We Offer: Some of our competitive benefits package includes: • Medical, dental, and vision insurance • Three weeks of vacation for newly hired employees • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option • Tuition reimbursement program • Student Loan Repayment Program • Life insurance and disability coverage • Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection • Birth, adoption, parental leave benefits • Ovia Health, fertility, and family planning • Adoption Assistance • Autism Benefit • Employee Assistance Plan, including up to 10 free counseling sessions • Healthy You Incentives, wellness rewards program • Doctor on Demand, virtual doctor visits • Bright Horizons, child and elder care services • Teladoc Medical Experts, second opinion program • And more! Learn More & Apply Now! We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. #TopOpps #P&CPM As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Description Job Title Quality Control Inspector Company Snapshot: Born in Miami more than a quarter of a century ago, Tuuci is the global leader in premium shade and placemaking products for hospitality, commercial, and residential outdoor settings. From locations in North America, Europe and Asia, our teams strive to meet and exceed the Tuuci vision: to help people live their best life outdoors through inspiring design, enduring performance, and convivial service. We work in a fun, fast-paced, and diverse environment in which close collaboration and the spirited exchange of ideas are encouraged. Our culture supports our vision by encouraging creativity, driving excellence, and supporting personal growth and development. Tuuci is searching for a team member who embodies passion and performance in the Quality Control department. The Quality Control Inspector position inspects raw materials, finished products and the procedures of the entire production cycle to ensure efficiency and consistency. Other responsibilities include but not limited to: Essential Duties and Responsibilities: Conduct audit inspection on the in-process, process procedure and finished goods products by confirming specifications using drawings and procedures. Approve or reject raw materials with respect to quality standards. Document inspection results by completing reports and logs. Assist in determining the root cause and the implementation of a corrective action. Organize the disposition of rejected materials and log all rejected materials. Measure products with rulers, calipers, gauges, or micrometers. Monitor operations to ensure that they meet production standards; recommend adjustments to the production process. Document the QC results by preparing reports of the findings; ensure materials are checked in with the required paperwork and is in proper condition. Maintain safe and healthy work environment by following standards and procedures. Assist in the development of SOPs. Other tasks as assigned. Education and Qualifications: We prefer candidates with 2 years of quality control, receiving and inspection experience. Experience working in warehouse or manufacturing environment. Experience with reading engineering drawings, measuring tools and proficiency in MS Word and Excel. Lift up to 45lbs. Must be Fluent in English and Spanish. This is a full-time, night shift position hours are Monday through Friday from 3:30pm to 12:00am and occasionally require overtime up to 2:30am and Saturdays. Tuuci is an equal opportunity employer. All applicants and employees are to be treated equally with the same rights and privileges with respect to recruiting, hiring, promotions, demotions, transfers, separations, compensation, and benefits regardless of their age, race, color, creed, religion, or ethnic origin, sex, sexual orientation, pregnancy-related status, marital status, veteran status, physical or mental disability, where the individual is otherwise qualified, or any other category protected by applicable law. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. *************

For nearly 30 years, DASI has been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers' parts and inventory needs in more than 140 countries. DASI is embracing the potential of online sales and their digital marketplace, which has been growing exponentially and has tremendous potential with the right technology team in place to support and take it to the next level. Purpose: At DASI, the role of the QC Inspector is to ensure that all incoming and outgoing material is being checked for compliance to customer and/or DASI standards. Key accountabilities: Investigate NCM (Nonconforming Material). Control the segregation and proper disposition of material designated by the Material Review Board. Collect data for QA to use in training and performance evaluation of inspection staff. Coach Inbound and/or Outbound inspection teams to recognize errors and areas for improvement. Scrap process as required. Participate in Continuous Improvement Projects (CPAR's). Perform all other duties as assigned. Key skills and competences: Focus on delivering exceptional customer service. A pro-active team worker with warehouse experience ideally in an aerospace related business Ability to be flexible, responsive and enthusiastic. Able to cope well under pressure and resolve issues and problems using their own initiative. Able to work effectively to tight deadlines and targets. Looking for a challenging role in which they can develop personally and professionally. Results driven, taking pride in achieving objectives. Ability to work in a fast-moving environment where a pro-active, can-do attitude is needed to achieve goals. Experience and qualifications: High school diploma or equivalent required. Minimum 2 years of processing aviation surplus parts is required. ISO and/or AS Quality Standard knowledge, a plus. DASI, LLC. and group companies are an Equal Opportunities Employer

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter. All we do is charter. And we do a lot! Our business is built to only serve groups like yours, and you are our number one priority. In addition to concentrating our efforts on being the best in those things you want from any airline - like industry leading safety-programs and over 25 years of proven reliability and financial stability - we provide a suite of services unparalleled by any other airline. Sound like a match? You're in luck. Miami Air is currently seeking a highly motivated and personable individual to join the company as a Quality Control Inspector responsible for the efficient and economic determination of the airworthiness of aircraft, engine, appliance and component maintenance actions as assigned, and conduct inspections in accordance with the Maintenance Program, AD, SB or other requirement to ensure aircraft, engines, appliances and components are maintained to a prescribed standard in order to continue their airworthiness. Functions & Responsibilities Perform preliminary, in progress, hidden damage, and final inspections. Performs special inspections as detailed by the requesting or requiring document. Performs Required Inspection Item (RII) and Buy Back inspections. Perform receiving inspections to ensure the use of legal, conforming and applicable parts and materials. Ensure that inspections and surveillance are performed as required on necessary maintenance actions in order to assure the use of approved data, material, tools, test equipment and that high standards of workmanship are present. Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies and procedures. Conduct daily audits of aircraft work packages including checks/inspections forms, log pages, routines and non-routines, modification orders, etc. to ensure completion, correctness, use of appropriate references to approved data in all entries and forms. Review the aircraft and engine logbooks, using the same criteria as described in item f above, at checks and during accomplishment of any maintenance. At the appropriate checks, transcribes all pilot reports and deferred maintenance items to the appropriate work forms. Conduct records analysis of audits and reviews of data/information for continuing analysis and surveillance reports as identified by the Manager, QC/QA & Training. Lead and maintain the current the Structural Defect Log as assigned. Review and address the calibrated tools and equipment status and shelf-life status and ensure correction of any discovered discrepancies during the first 10 days of each month. Perform as a “Designated Instructor” in areas and/or on subjects as qualified and approved by the Manager, Maintenance Training and QA. Perform the inspections of S.O.S. Tag items and documents results per the S.O.S. program. Complete safety and housekeeping checks of hangar and line work areas on a routine basis as designed and assigned by the Manager, QC/QA & Training. Perform other duties as necessary within the scope of quality. Qualifications & Requirements Associate degree A&P Mechanic License Airman's Certificate with A&P ratings for a minimum of 3 years. 3 years of experience as licensed A&P mechanic with 2 years of maintenance experience on large aircrafts. Boeing 737 experience, Classic and NG preferred. ETOPS and RVSM operations experience. Knowledgeable of the FARs, GMM, Maintenance Programs. Excellent written and oral communication skills. Proficient with Microsoft applications. Knowledge of TRAX systems, a plus. Knowledgeable of manuals and publications skills, a plus. Miami Air International provides equal employment opportunities to all legally eligible and authorized to work applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Aoka is a third-party municipal services provider supporting federal, state, and local governments with code compliance, inspections, and consulting services. We specialize in delivering efficient solutions for building safety, housing standards, and regulatory compliance. Our proprietary software, VertexPlans, streamlines inspection services by integrating plan reviews, field inspections, and reporting into one seamless platform-ensuring faster turnaround times and improved communication for our clients. We are currently seeking a qualified OHP compliance Inspector to perform Housing Quality Standards (HQS) inspections for Senior care facilities. Responsibilities Schedule and conduct on-site inspections for new construction and substantial rehabilitation of Senior Living properties Evaluate units for compliance with HUD Housing Quality Standards (HQS) Complete inspection reports and required documentation in accordance with HUD and company guidelines Qualifications Willingness to travel for inspections Valid driver's license and reliable transportation Education & Experience ICC certification, engineering license, or architectural license OR At least 5 years of experience in multifamily housing inspection is required Compensation $30 - $60 per hour, based on experience and qualifications Apply Now to Join Our Growing Team! Aoka is proud to be an equal opportunity employer and provides equal employment opportunities (EEO) to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity or genetics.

Job DescriptionBenefits: Bonus based on performance Company parties Competitive salary Free food & snacks Free uniforms Opportunity for advancement Paid time off Training & development Quality Control Furniture Inspector Location: 3505 NW 55th Street, Miami, Florida 33142 Company: Funxion White Glove Service Job Type: Full-Time About Funxion Funxion White Glove Service specializes in high-end receiving, storage, inspection, deluxing, and white-glove delivery of furniture and fixtures for residential and corporate clients. Our reputation is built on precision, accountability, and presentation. We are seeking a detail-oriented Quality Control Furniture Inspector to join our receiving and operations team. Position Overview The Quality Control Furniture Inspector is responsible for inspecting furniture upon receipt and prior to delivery to ensure accuracy, condition, and presentation meet Funxions white-glove standards. This role also performs basic deluxing services when items arrive dusty or lightly soiled. The ideal candidate takes pride in quality, has a strong eye for detail, and understands the importance of protecting high-value client assets. Key Responsibilities Inspection & Documentation Verify quantities, product specifications, and condition against packing slips and receiving documents Identify damage, defects, or discrepancies upon receipt Accurately document issues with detailed notes and photos Properly label, tag, and prepare items for storage or delivery Communicate inspection findings clearly with receiving, operations, and office teams Quality Control & Deluxing Responsibilities Inspect furniture and fixtures for damage, defects, and overall cleanliness Perform basic deluxing services as required, including dust removal, surface cleaning, and light wipe-downs Use approved cleaning materials and methods appropriate to furniture type, material, and finish Identify items requiring advanced cleaning, repair, or refinishing and escalate per company procedures Ensure all inspected and deluxed items meet Funxions white-glove quality standards prior to storage or delivery Operational Support Repack items securely after inspection or deluxing Maintain a clean, safe, and organized inspection area Follow company safety, handling, and quality procedures Support receiving and warehouse operations as needed Qualifications Previous experience inspecting furniture, fixtures, case goods, or upholstery preferred Strong attention to detail and ability to identify damage, defects, and cleanliness issues Comfortable performing light cleaning/deluxing as part of quality control Ability to document findings clearly using mobile devices or tablets Ability to lift, move, and handle furniture safely with a team Reliable, punctual, and team-oriented Experience in warehousing, receiving, or logistics environments is a plus English proficiency required (reading and writing inspection notes) Benefits Competitive pay Paid time off and company holidays Opportunities for growth within operations and quality control Supportive, team-focused work environment

Quality Control Inspector Immediate need for a Quality Control Inspector for a manufacturing and construction company in Miami, FL to join our team. The ideal candidate will play a crucial role in ensuring that our products meet or exceed industry standards and customer expectations. RESPONSIBILITIES: * Ensure all products and processes comply with AISC, company, and industry quality standards. * Inspect raw materials, in-process components, and finished steel products through visual checks, measurements, and NDT methods to verify conformance to specifications. * Perform inspections on fabricated and erected steel structures to confirm compliance with design and detailing requirements. * Document and report inspection findings, nonconformities, and root cause analyses; collaborate with production and engineering teams to implement corrective and preventive actions. * Participate in design and scope reviews, validation, and final product approval processes. * Maintain quality documentation, inspection records, and provide data for management review meetings. * Support continuous improvement initiatives to enhance product quality, process efficiency, and safety compliance. * Ensure adherence to all AISC quality assurance procedures, regulatory requirements, and company safety policies. * Contribute to training, audits, and professional development activities as needed. QUALIFICATIONS: * 2+ years' experience with Structural Steel required. * Knowledge of AISC Process. * Detail oriented with ability to multi-task in a fast-moving environment with shifting priorities and changing requirements. * Fluent in the English language, in both oral and written form, required, bilingual in the Spanish language preferred. * Leadership abilities and able to identify and resolve problems. * Strong proficiency with Microsoft Office tools required. * Proficient in the ability to read and interpret drawings and technical documentation; and * Ability to work well under pressure and be able to assist in expediting shipments when necessary, working in conjunction with Production and Shipping schedules. * Ability to foster and promote a positive work environment. EDUCATION/TRAINING/EXPERIENCE: * 3+ years of responsibility in quality management required; within a manufacturing environment preferred. * Experience working in a manufacturing environment preferred. * Must have experience using various mechanical inspection tools, such as computers, micrometers, height gauge, radius gauge, pin gauges, protractors, and calipers. * Experience working with machined parts, assemblies, and/or sub-assemblies preferred. * Civil or Industrial Engineer preferred. BENEFITS: * 401(k) with matching contributions * Health insurance (medical, dental & vision) * Paid time off

Facility Contract Services is a Florida based contract services company, responsible for the employment and management of personnel for municipal clients. Facility Contract Services is currently seeking dynamic and goal-driven employees for the City of Pembroke Pines Planning and Economic Development Department. Employees that are motivated to take on today's greatest challenges and rewards in the field of local public service and who are passionate about making a difference in local government. This exciting opportunity in the City of Pembroke Pines operates 4 days a week (Monday through Thursday 7:00 A.M. to 6:00 P.M.) and offers excellent compensation and benefits including health insurance and 401(k) with a Company match. NATURE OF WORK This is a technical position involving landscape plan review; processing, issuing, and reviewing tree removal permit and landscape permits; and enforcing the City code as it relates to landscaping. Work is performed within the Planning and Economic Development Department. DUTIES AND RESPONSIBILITIES • Inspects job sites to insure compliance with the approved landscape plan prior to a certification of occupancy being issued by the Building Department. • Performs general and courtesy landscape inspections on existing properties within the City to ensure landscape compliance with the approved landscape plan. • Reviews and processes Tree Removal Permits. • Assists with tree appraisals to determine proper mitigation on properties. • Performs overall tree and landscape assessments as needed to determine the overall health of all landscape and provide recommendations as to rehabilitation or removal. • Investigates complaints regarding violations of ordinances, follows-up on complaints, and recommends measures for correcting violations. • Records daily landscape related permit activities via City database and or building permitting system. • Coordinates with Code Compliance division to assist in assessing landscape violations. • Develops, prepares, and presents code cases at Special Magistrate hearing for both residential and commercial properties. • Assist public residents with concerns as it relates to landscaping. Responds to residents in person and via phone and mail on a daily basis. Strong customer service skills are a must. • Participate in Citywide educational events related to landscaping. • Performs related work as required. Qualifications KNOWLEDGE, SKILLS AND ABILITIES: • Extensive knowledge of the principles and practices of landscape and arboriculture techniques. • Ability to read and interpret plans and specifications to determine compliance with established standards, especially landscape and irrigation plans • Ability to effectively multi-task while working with tight deadlines and shifting priorities • Ability to quickly and independently learn new software • Ability to organize work for timely completion • Comprehensive knowledge of native, non-native, invasive and nuisance trees, shrubs, and plants; including soil composition, irrigation, fertilization, growth patterns, and maintenance. • Knowledge of diseases and parasites detrimental to trees and appropriate treatments. • Ability to interpret ordinances. • Ability to obtain knowledge of municipal ordinances relating to landscaping and beautification. • Ability to maintain effective working relationships with the public. • Ability to work independently on a daily basis. • Ability to maintain regular and punctual attendance. MINIMUM QUALIFICATIONS: A minimum of an Associate's degree in landscaping, horticulture, or other appropriate field is required. Bachelor's degree and two (2) years experience in municipal landscaping and/or landscape inspections is preferred. Must possess ISA Arborist Certification. Must possess LIAF Landscape Inspector's Certification. Possession of a valid, appropriate driver's license and an acceptable driving record. SPECIAL REQUIREMENTS: Possession of a valid, appropriate driver's license and an acceptable driving record. KNOWLEDGE, SKILLS AND ABILITIES: • Knowledge of conversational English and spelling. Spanish speaker is a plus. • Knowledge of laws, codes and regulations related to Landscape Installation and Maintenance. • General knowledge of the building permit process. • Ability to read, interpret and explain City, State, and Federal laws, ordinances and regulations applicable to the work. • Ability to read and interpret building and landscape plans. • Ability to understand and follow written and oral instructions. • Ability to clearly communicate information both verbally and in writing. • Ability to operate basic office equipment. • Ability to operate a City vehicle. • Ability to access, operate and maintain various software applications. • Ability to perform routine mathematical computations and tabulations accurately and efficiently. • Ability to read, update and maintain various records and files. BENEFITS: One of the many advantages of working with the Vesta Property Services family of companies are the great benefits that we offer to you and your eligible dependents. We offer benefits that foster the health and well-being of you and your family such as medical, dental and vision coverage along with programs to enhance your financial security such as disability, life insurance and a 401 (k) retirement plan just to name a few. Benefits are offered to full-time employees (30+ hours per week). AAP/EEO Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, sexual orientation, protected veteran status or any other characteristic protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DRUG FREE WORKPLACE In compliance with the Drug-Free Workplace Act of 1988, Facility Contract Services has a longstanding commitment to provide a safe, quality-oriented and productive work environment consistent with the standards of the community in which the company operates. Alcohol and drug abuse poses a threat to the health and safety of Facility Contract Services employees and to the security of the company's equipment and facilities. For these reasons, Facility Contract Services is committed to the elimination of drug and alcohol use and abuse in the workplace. OTHER DUTIES MAY BE ASSIGNED The above statements reflect the general information considered necessary to descript the principle functions of the job and should not be construed as a detailed description of all work requirements that may be inherent in the position. Nothing in this job description restricts managements right to assign or reassign duties and responsibilities to this job at any time. Job Type: Full-time

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. 2nd Shift: 2:30pm-11:00pm

Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

CAP Government, Inc. is seeking the immediate hire of a licensed QC Multi-Disciplined Code Inspector needed for construction project inspection and plan review services. The work involves interpreting and applying these regulations to customer relations, reviewing building construction blueprints, product approvals, shop drawings, and other project documents. Some travel may be required for inspections and/or managing projects in the assigned area. Candidates must possess a professional demeanor, have both technical and industry experience, and be a team player. Duties, Responsibilities, and Qualifications Demonstrates excellent communication and customer service skills. Will visit the job site full-time (M-F), 40 hrs. per week, performing the following minimum tasks: Reviewing, observing, and verifying that construction conforms to the scope of work identified by the approved construction documents Observing and verifying that construction conforms to all applicable codes, standards, and guidelines, including the applicable International Codes, local codes, and DoD Standards. Writing/Updating field reports. Experience with MS Office (MS Word) is required. Experience with MS Excel and Adobe Acrobat is highly recommended and desired. Taking photos of construction progress Uploading photos and field reports to our file sharing website for viewing by client Reporting on removal or repair of defective or unsuitable work Reviewing contractors' monthly payment applications and recommending payment to owner Completing a monthly Design & Construction Status Report and distributing to the client Issuing Certificates of Occupancy and/or Certificates of Completions Verifying completion of punch lists Perform other related duties as assigned by the Manager Education/Experience: State of Florida Plan Review License (PX) or provisional license in building, electrical, mechanical, and/or plumbing; or State of Florida Inspector License (BN) or provisional license in building, electrical, mechanical, and/or plumbing, or ICC Residential & Commercial Plans Examiner and/ or Inspection certification in building, electrical, mechanical, and/or plumbing; or Minimum 5 years of experience performing code compliance inspections is required Bachelor's degree in the construction or design field is desirable 3 years in construction administration or superintendent/construction manager role is desirable Experience in managing construction projects as an architect, superintendent, project manager, or similar role, specifically during the construction administration phase of a project is desirable Must have knowledge of the Florida Building Code and other regulations pertaining to construction and development. Ability to understand and interpret codes and evaluate project proposals and projects under construction to verify conformance with code requirements. We offer competitive compensation packages; medical, dental, and vision coverage; life insurance, short- and long-term disability insurance; 401(k); employee referral; educational reimbursement; and more. Salary: Commensurate with experience and licensure Equal Opportunity Employer / Drug-Free Workplace / Veterans Our firm is committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state or local laws.

Property Inspector Start working in the field and earn $50K to $75K - no experience required. Responsibilities: • Canvass neighborhoods to find old original windows, doors and damage roofing • Schedule FREE estimate appointments for windows, doors, bathrooms and roofing • Work outdoors and engage directly with homeowners Qualifications: • No experience required (We'll Train!) • Outgoing personality • Strong communication skills • Driven to achieve goals • Must have a car or a truck Compensation: • Salary, Commission & Bonus (Earn $50K to $75K per year) • 5-day work schedule (No Weekends!) • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. 2:00pm-10:30pm

Property Inspector Start Your Career in the Field - No Experience Needed Earn $50K-$75K! Responsibilities: • Canvass neighborhoods to find old original windows, doors, and damage roofing • Schedule FREE estimate appointments for windows, doors, bathrooms and roofing • Work outdoors and engage directly with homeowners Qualifications: • Outgoing personality • Strong communication skills • Driven to achieve goals • Must have a car or a truck Compensation: • Salary, Commission & Bonus (Earn $50K to $75K per year) • 5-day work schedule • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.