Inspector jobs in Independence, KY - 177 jobs

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #3201791225 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an entry-level Petroleum Inspector to join our Caleb Brett team in Cincinnati, OH. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award- winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector is responsible performing the necessary volume measurements, temperature measurements, sampling, calculations, documentation and reporting which ensures that the customer receives an independent, accurate and complete assessment of quantity and quality of material. This position will travel at least 75% of the time. Salary & Benefits Information Individual compensation packages are based on a variety of factors unique to each candidate including skillset, experience, qualifications, and other job-related duties. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures Able to perform by specified methodology the below duties in addition to completing the associated paperwork Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges and ships Perform routine equipment calibrations, verification and function checks Verify and communicate the results obtained and to make the entries into the appropriate media Provide on the job assistance and receive training from more experienced inspectors To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator To perform routine equipment calibration, verification and function checks To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner To maintain work areas, records and equipment in a clean, organized and functional condition To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information Model Intertek's 10X Energies at all times within the workplace, practicing business the right way Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work Minimum Requirements and Qualifications Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis Cannot have a fear of heights Ability to climb ladders and stairs for shore tanks Valid driver's license and reliable driving record (required) Must have or be able to obtain a Transportation Worker Identification Credential (TWIC) Ability to work in a fast-paced, multi-tasking environment with shifting priorities and demanding deadlines Must be detailed oriented and able to effectively prioritize and organize workload with efficient time management Ability to communicate and interact effectively in verbal, written and presentation skills Ability to travel as business needs dictate - up to 75% of the time Physical Requirements: Physical requirements to include lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving Ability to climb ladders and stairs for shore tanks Preferred Requirements and Qualifications: Previous experience performing petroleum inspections is preferred TIC certified is a plus

Caleb Brett - Entry-Level Petroleum Inspector - Cincinnati, Ohio Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an entry-level Petroleum Inspector to join our Caleb Brett team in Cincinnati, OH. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award- winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector is responsible performing the necessary volume measurements, temperature measurements, sampling, calculations, documentation and reporting which ensures that the customer receives an independent, accurate and complete assessment of quantity and quality of material. This position will travel at least 75% of the time. Salary & Benefits Information Individual compensation packages are based on a variety of factors unique to each candidate including skillset, experience, qualifications, and other job-related duties. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures Able to perform by specified methodology the below duties in addition to completing the associated paperwork Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges and ships Perform routine equipment calibrations, verification and function checks Verify and communicate the results obtained and to make the entries into the appropriate media Provide on the job assistance and receive training from more experienced inspectors To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator To perform routine equipment calibration, verification and function checks To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner To maintain work areas, records and equipment in a clean, organized and functional condition To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information Model Intertek's 10X Energies at all times within the workplace, practicing business the right way Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work Minimum Requirements and Qualifications Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis Cannot have a fear of heights Ability to climb ladders and stairs for shore tanks Valid driver's license and reliable driving record (required) Must have or be able to obtain a Transportation Worker Identification Credential (TWIC) Ability to work in a fast-paced, multi-tasking environment with shifting priorities and demanding deadlines Must be detailed oriented and able to effectively prioritize and organize workload with efficient time management Ability to communicate and interact effectively in verbal, written and presentation skills Ability to travel as business needs dictate - up to 75% of the time Physical Requirements: Physical requirements to include lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving Ability to climb ladders and stairs for shore tanks Preferred Requirements and Qualifications: Previous experience performing petroleum inspections is preferred TIC certified is a plus Intertek: Total Quality. Assured. Intertek is a world leader in the Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. With passion, pace, and precision we work to exceed our customers' expectations, while engaging with our employees to be 10X in their performance and professional growth. Intertek is a drug-free workplace. As a condition of employment, certain positions may be required to pass a pre-employment drug test based on the type of work that will be performed. We Value Diversity Intertek's network of phenomenal people are our greatest assets, and the diversity they bring fuels our success. Intertek is an Equal Employment Opportunity Employer that values inclusion and diversity. We take affirmative action to ensure all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. For individuals with disabilities who would like to request accommodation, or who need assistance applying, please email ******************* or call ************** (option #5) to speak with a member of the HR Department. #LI-DW1 * Intertek does not accept unsolicited approaches from agencies and will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

Build an Aviation Career You're Proud Of Your work ties us all together, helping our team's function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. What you'll do: Ensures the functional and acceptable status of the non-destructive test equipment in accordance with the appropriate company process. Determines the acceptance of parts and components for surface condition in preparation for the non-destructive test process. Performs the specific non-destructive test process as identified in the shop order work instruction. Processes the part(s) in accordance with the appropriate company process. Inspects and interprets the test results. Responsible for reporting on the status and performance of the NDT function to the NDT Manager as applicable. Exercises leadership on NDT related topics, including improvements and Continuous Improvement (CI) projects. Marks all unacceptable discontinuities for location and dimension. Provides technical support to NDT Inspectors Documents the completion and test results of non-destructive test process. Ensures parts are cleaned following completion of NDT process and in acceptable condition for further processing. Performs equipment and material maintenance checks in accordance with the appropriate company process. Maintains records of all maintenance performed on the non-destructive test equipment and materials. Provides instruction and training to NDT inspectors in inspection methods and practices to provide consistent application of best practices. Leads the development and monitoring of NDT related training plans including continual and re-current training Liaisons with engineering, inspection and other personnel as required to assist in researching and solving non-destructive test process problems. Acts as a mentor to NDT personnel and works closely with the Training and Development Specialist where necessary. Maintains personal qualifications as stated in the appropriate company process. Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. As required, may be assigned to perform selected duties of the NDT Inspector to meet operational goals. Carries out other duties as assigned. Position Requirements: Strong planning, organizational, leadership, interpersonal, decision making, oral and written communication skills. Minimum level III in one NDT method Knowledgeable in and understanding of inherent and non-inherent discontinuities found in materials. Knowledgeable in the Workplace Health & Safety requirements. Maintain internal non-destructive test process approval. Ability to read, understand and interpret blueprints Proficient in technical writing. Excellent decision-making skills to ensure compliance to all customer, regulatory and company requirements. Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day. Regularly required to sit and stand for prolonged periods. Working knowledge of production management computer system and other related internal control systems. Currently authorized to work in the Unites States without sponsorship.

Caleb Brett - Entry-Level Petroleum Inspector - Cincinnati, Ohio Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an entry-level Petroleum Inspector to join our Caleb Brett team in Cincinnati, OH. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award- winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector is responsible performing the necessary volume measurements, temperature measurements, sampling, calculations, documentation and reporting which ensures that the customer receives an independent, accurate and complete assessment of quantity and quality of material. This position will travel at least 75% of the time. Salary & Benefits Information Individual compensation packages are based on a variety of factors unique to each candidate including skillset, experience, qualifications, and other job-related duties. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures Able to perform by specified methodology the below duties in addition to completing the associated paperwork Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges and ships Perform routine equipment calibrations, verification and function checks Verify and communicate the results obtained and to make the entries into the appropriate media Provide on the job assistance and receive training from more experienced inspectors To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator To perform routine equipment calibration, verification and function checks To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner To maintain work areas, records and equipment in a clean, organized and functional condition To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information Model Intertek's 10X Energies at all times within the workplace, practicing business the right way Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work Minimum Requirements and Qualifications Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis Cannot have a fear of heights Ability to climb ladders and stairs for shore tanks Valid driver's license and reliable driving record (required) Must have or be able to obtain a Transportation Worker Identification Credential (TWIC) Ability to work in a fast-paced, multi-tasking environment with shifting priorities and demanding deadlines Must be detailed oriented and able to effectively prioritize and organize workload with efficient time management Ability to communicate and interact effectively in verbal, written and presentation skills Ability to travel as business needs dictate - up to 75% of the time Physical Requirements: Physical requirements to include lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving Ability to climb ladders and stairs for shore tanks Preferred Requirements and Qualifications: Previous experience performing petroleum inspections is preferred TIC certified is a plus Intertek: Total Quality. Assured. Intertek is a world leader in the Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. With passion, pace, and precision we work to exceed our customers' expectations, while engaging with our employees to be 10X in their performance and professional growth. Intertek is a drug-free workplace. As a condition of employment, certain positions may be required to pass a pre-employment drug test based on the type of work that will be performed. We Value Diversity Intertek's network of phenomenal people are our greatest assets, and the diversity they bring fuels our success. Intertek is an Equal Employment Opportunity Employer that values inclusion and diversity. We take affirmative action to ensure all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. For individuals with disabilities who would like to request accommodation, or who need assistance applying, please email ******************* or call ************** (option #5) to speak with a member of the HR Department. #LI-DW1 * Intertek does not accept unsolicited approaches from agencies and will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

TempToFT Quality Inspector Rate: $18-22/hr Hours: 7am-3pm Wilmington, OH C-D Responsibilities: - Inspects raw materials, parts, component, and finished product for compliance with dimensional and performance specifications using established inspection plans. - Use handheld measuring equipment and with working knowledge of at least 1 advanced measurement system (e.g., CMMs, optical comparators). - Statistical sampling using an inspector's rule. - Read comprehend simple instructions, short correspondence, and memos. - Documents inspection observations and reports non-conformances in the computer system. - Use ERP computer system. - Operate forklifts. - Safely lift and transport up to 50 lbs. over short distances. Requirements: - High School diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience - Availability for shift work and overtime as needed - Close vision (corrected or uncorrected) with peripheral, depth perception and color vision capability - Three years of on-the-job experience - Ability to write simple correspondence - Ability to speak effectively before groups of customers or employees of organization - High school level reading, writing and comprehension proficiency - Inspector 1 math skills - Ability to read, understand, and analyze product requirements against the actual product for purposes of evaluation If you possess the skills we are looking for and ready to make a positive impact, apply NOW! We look forward to connecting soon!

JOB DESCRIPTION Job Title: Inspector Department: CVG 145 Line MX - Dept. 140 Reports To: Inspection Supervisor / Inspection Manager Inspect aircraft and components for discrepancies. Inspect and evaluate work performed by mechanics, sheet metal mechanics, and avionics technicians to ensure the proper rework of discrepancies. ESSENTIAL DUTIES AND RESPONSIBILITIES Review the scope and detail of inspection requirements and inspect aircraft and components by obtaining and interpreting work cards. Complete a visual inspection of aircraft areas opened by mechanics, including by not limited to fuel tanks, empennage, cargo areas, under floor areas, fuselage skin, engines, pylons, wings, flight control surfaces, flight decks, and landing gear. Identify non-routine work on aircraft systems, including but not limited to engine performance, pneumatic/hydraulics, pressurization, air conditioning, electrical, fuel and flight controls. Identify the location of discrepancies by using fuselage body stations and butt lines. Interpret and ensure compliance with all maintenance manual instructions, airworthiness directives, service bulletins, and fleet campaign directives. Ensure that safety procedures are followed and potential damage to company property is minimized by overseeing aircraft handling activities, including but not limited to jacking, fueling, defueling, and towing. Perform a receiving inspection for new and continued service parts to ensure serviceability, including but not limited to verifying certification from the manufacturer or overhaul facility, and inspecting for shipping damage. Maintaining control and inventory for the QC Bond quarantine cage, including submitting reports of Suspected Unapproved Parts (SUPs) to the Director of Quality Control. Conduct a weight and balance analysis by using approved maintenance manuals and scales. Ensure completion of logbook entries and release the aircraft as airworthy for test flight or flight operation checks. Ensure compliance with all applicable FAA regulations during the course of day to day assignments. Perform visual and dimensional inspections of articles, and determine serviceability and/or repair requirements by obtaining, reviewing, and interpreting inspections requirements. Ensure proper rework of discrepancies by inspecting and evaluating work performed by mechanics / technicians. Ensure completion of maintenance entries and work records for all articles inspected. Perform any other duties as assigned by the Manager of Quality Control and/or Assistant Director of Quality Control/Chief Inspector. Requires travel, individual must be willing to travel. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS Minimum qualifications to qualify for an Inspector position are as follows: 1. Hold and airframe and powerplant certificate. 2. Have at least 2 years of experience maintaining the same category and class of aircraft used by Kalitta Air. 3. Must have adequate documented training to substantiate qualifications. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. Must have at least 2 years of experience maintaining the same category and class of aircraft used by Kalitta Air. Must possess exceptional attention to detail. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to convert between different units of measure. Ability to compute rate, ratio, and percentage. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is regularly required to stand, walk, sit, climb/descend stairs, and bend. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Working were the aircraft is located either inside the hangar or outside on the ramp. Subjected to occasionally low - high noise levels. ACCOMMODATIONS: If you need reasonable accommodation for the online application process due to a disability, please call **************. Please include your contact information and details about posted position of interest. Only inquiries regarding assistance for those who need accommodation with the online application process due to a disability will be returned. **if you cannot apply online, other accommodations can be made** ** Must be authorized to work in the United States** 2nd Shift

Inspect all types of tools, gages, fixtures, templates, assemblies, sub-assemblies, component parts, etc. requiring layout to determine accuracy of geometric characteristics and/or functional performance as required. Perform mathematical calculations from interpretations of blueprints. Perform special setups on all kinds of inspection equipment. Set-up and operate all types of computer assisted measuring machines, including unique probe systems and various peripherals involving advanced trigonometric calculations, working from blueprints, detailed drawings, sketches, oral and written instructions, etc. Must be able to read and interpret complex aircraft engine blueprints/drawings and physically set up and accurately layout the dimensional characteristics and relationships described on the print utilizing conventional layout tools or coordinate measuring techniques. Adjust tools, gages, and fixtures working from procedures/instructions. Supply variable data on aircraft components or tools as required. Identify non-conforming characteristics per instructions/procedures on all types of tooling, gages, and engine hardware. Provide complete inspection service on all tools/parts requiring inspection including, but not limited to, customer interface at crib windows, and trucking back to the customer when required. Interface directly with all levels of engineering personnel. Maintain records and perform related duties. Required to work with minimum or no direct supervision. Maintain the immediate work environment to include cleaning equipment and general shop housekeeping. Definition for this occupation is for identity only; it does not detail all operations performed or required. MINIMUM EXPERIENCE: 1 Year One (1) year inspection experience equivalent to R19 Dimensional Inspection (including R19 Tool & Gage E0203). Or 3 years setting up and operating one or a combination of machine tools such as jig bores, horizontal boring mills, precision drills. Or the satisfactory completion of the Advanced Quality Techniques Training Program Experience on any jobs combined during the 1988 job classification combination or the 1994 Multi Skilling Agreement may be used in meeting the minimum experience criteria. THIS CLASSIFICATION INCORPORATED: R23 Inspector MMCA Varied E0220 R23 Inspector Tool & Gage E0204 R19 Inspector Diversified (partial) E0227 DISPLACEMENT: Incumbents of this job have displacement rights to following jobs: Inspector Development, E0202, R21 Heat Treat Services, E6603, R17 Multi Services. E0601, R16 Facilities Services, E0500, R13 Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

This position is eligible for a $500.00 hiring/retention bonus! $100 Monthly Perfect Attendance Award Off EVERY FRIDAY! Hours: M-Th, 4:30pm-3:15am Starting Rate: $16.50/hr. and up based on experience Summary: Operator of Automated Optical Inspection (AOI) equipment relating to electronic circuit board assembly. Inspector of electronic materials and assemblies for conformance to established specifications. Operator must become familiar with assembly practices, procedures, and industry acceptability standards. Relies on limited experience and judgment to plan and accomplish goals; performs a variety of tasks. A certain degree of creativity and latitude is required. Responsibilities/ Principal Duties: Perform basic startup and shutdown procedure of AOI equipment Understand basic machine and process concepts Learn to read values, polarity and orientation of thru-hole and SMT components (i.e. capacitors, resistors, transistors, IC's etc.) Must have strong computer skills and demonstrate the ability to learn AOI programming Understand the IPC-A-610 Class 2 standard Become familiar with inspecting products to IPC-A-610 Class 2 standards or customer specifications Utilize inspection-gauging equipment to meet customer and IPC standards Learn to identify and read customer supplied or Spectra-Tech assembly drawings for referencing component polarity, orientation, and reference designators Learn to utilize a bill of materials to identify customer part numbers for inspection requirements and values Interpersonal Skills: Takes responsibility for the quality of one's individual work Demonstrates accuracy and neatness in their work Cooperative and dependable, highly motivated and trustworthy Respects and works effectively with fellow team members Will notify team leader if team is not following quality processes Will present new ideas and improvements Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: High School Diploma or GED Experience: Previous manufacturing experience required, preferably in the electronic assembly field. Physical/Cognitive Requirements: Work is performed in a manufacturing environment with frequent contact with others. Job requires prolonged sitting, standing and frequent bending, stooping and stretching. Equipment: Knowledge of and skills in the use of the AOI equipment, various gauging and measurement tools. Work Environment: Job functions will be performed in a climate-controlled manufacturing environment. This position requires a pre-employment background check and drug test. Hours: M-Th, 4:30pm-3:15am Benefits Spectra-Tech Manufacturing provided benefits plan includes paid time off, medical and dental insurance, group life insurance, and a 401(k) plan with a generous company match. Spectra-Tech is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to: veteran status, uniform service member status, race, color, religion, sex, sexual orientation, national origin, age, physical or mental disability, genetic information or any other protected class under federal, state, or local law.

ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform routine checks, tests, gauging and instrument inspections of materials, parts in process and finished parts. Performs routine tests on materials, goods in process or finished goods where results are compared with company quality standards. Performs visual inspection for obvious defects. Record results on inspection forms or charts and reports number of defects found. Some lifting of items of various weights, both assisted and unassisted. Ability to understand blueprints, operation sheets, and procedures. Use of standard measuring equipment including micrometers and indicators;Calipers, height gage. QUALIFICATIONS: 1-2 years of experience as an inspector and/or NDT technician. Able to communicate verbally and/or in writing with other workers, members, or supervision, and others as necessary. EDUCATION REQUIREMENTS: High school diploma or equivalent required.

CTL Aerospace is a full service NADCAP certified composite-manufacturing company providing services to the major aerospace and governmental organizations since 1946. CTL specializes in the manufacturing of Fiber Reinforced Polymer Structures. We are seeking a talented Quality Control Inspector to work in a fast-paced, team-oriented environment at our northern Cincinnati, Ohio location (less than 30 minutes from Dayton and/or northern Kentucky). Essential Job Functions Meets or exceeds all criteria for Quality Control Inspector I Perform dimensional/visual inspections on components and final assemblies using monitoring and measuring equipment (M&ME) according to production schedule Must comply with internal quality system, business policies, and regulatory requirements and supports business goals and objectives Work with others in a teamwork atmosphere Maintains work-station cleanliness on daily basis Experienced reading and understand blueprints, travelers/routers, and work instructions Can utilize basic shop math skills to aid with tolerancing and obtaining measurements of product Basic knowledge of GD&T tolerancing Basic understanding of utilizing an ERP system Experience with generating inspection reports and FAI reports Ability to Multi-task Basic Understanding in issuing Nonconforming Reports Capable of working with minimal supervision to support manufacturing needs Perform other duties as assigned Qualifications HS Diploma or equivalent. Minimum 2 yrs. experience related to precision manufacturing and inspection (Aerospace Industry with emphasis on composite manufacturing a plus) Ability to interact with people on the floor, good social skills, and able to work with diverse work groups Good analytical, writing and communication skills Must be a US Citizen Must be able to work in a manufacturing environment and lift up to 50 lbs. CTL Aerospace will provide a pay rate commensurate with experience and an excellent benefits package. To learn more about our company, please visit **************************** To be considered please e-mail or fax your resume and salary requirements to: Human Resource Department ******************* Fax: ************ CTL Aerospace is an EEO/M/F/Disability/VET and Drug Free Employer Veteran Founded Small Business

Job Title: Fire Protection QC Inspector - Kitchens & Fire Extinguishers Location: Cincinnati, OH Silco Fire & Security isn't just a company, it's a mission. Every day, our team plays a vital role in protecting lives and property for over 45,000 businesses across Ohio, Kentucky and surrounding states. We design, install, maintain and monitor fire protection and security systems that keep people safe and businesses compliant. As the market leader in the Midwest, Silco is a growing, family-owned company with over 500 employees working from our headquarters in Cincinnati and branches in Dayton, Columbus, Toledo, Akron, Cleveland and Louisville. Recognized as a Top Workplace and named to the Inc. 5000 list of fastest-growing private companies, we have a long-standing track record of success and ambitious goals for the future. Our impact extends beyond fire alarms and sprinklers. We provide peace of mind to the communities we serve. At Silco, you're not just doing a job, you're making a difference. Position Overview: We are seeking a highly skilled and experienced Quality Control Inspector with a minimum of 5 years of expertise in the fire protection industry. The ideal candidate will play a crucial role in ensuring that our products and installations adhere to the highest standards. Responsibilities: Conduct Quality Inspections: Performing Quality Checks on inspections that have been performed on Kitchen Fire Protection Systems and Fire Extinguishers Ensure that inspections and installations comply with state and NFPA codes and regulations. Documentation and Reporting: Maintain detailed records of inspection findings, documenting any deviations or non-compliance issues. Generate comprehensive reports daily that will be distributed to employees and their managers. Collaboration: Work closely with Operation Managers, Supervisors, and service and installation teams to address quality concerns, provide guidance on corrective actions, and improve our quality standard. Provide consultations with techs and suggested follow up training when needed. Continuous Improvement: Participate in the development and implementation of quality control procedures and protocols. Identify opportunities for process improvements to enhance overall efficiency and effectiveness. Training and Development: Provide training to inspection teams on quality control standards, best practices, and regulatory requirements. Stay informed about industry advancements and changes in codes and standards. Qualifications: Minimum of 5 years of experience within the fire protection and life safety systems industry. Experience with Kitchen Suppression Systems and Fire Extinguishers is preferred. In-depth knowledge of relevant codes and standards (i.e. NFPA, local building codes). Strong attention to detail and excellent analytical skills. Ability to work independently and collaboratively within a team. Benefits: In addition to a competitive compensation package, Silco offers a wide range of benefits such as medical, dental, vision, Aflac and a Flexible Spending Account (FSA). Silco offers company paid short-term disability and life insurance, as well as company paid training. The Company also boasts a 401(k) program with company matching and tuition reimbursement. Silco provides paid holidays and generous paid time off. Employment at Silco is contingent upon completing and passing a background check and drug screen. Silco is an Equal Opportunity Employer.

Aerospace QC NDT Inspector Overall Summary of Job Quality Control Inspector's role is to ensure all repairs and operations are in compliance with FAA /EASA / ISO / AS and company's guidance. Essential Functions Ensure company procedures and FAA/EASA /ISO/AS Standards are followed, records maintained, forms and required paperwork. Ensure all repairs are in compliance with FAA regulations. Control and maintain technical documents and publications. Perform calibrations, read and interpret blueprints and specifications. Initiate and participate in corrective actions, rework problem solving and audit processes. Perform dimensional / visual inspections using standard inspection gages and CMM Perform FPI and UT inspections Promote an attitude to serve the customer, instilling a sense of urgency throughout the Inspection Department Minimum Qualifications: Graduation from high school and Technical School and three years of experience minimum in a variety of trades or any equivalent combination of education and experience which would provide the required knowledge, skills, and abilities. Ability to work from sketches, drawings, and blueprints. Ability to follow oral and written instructions and to communicate effectively. Complete understanding of current NDI procedures. Ability to work cooperatively with others. Excellent work history and attendance record. Pre-employment drug screen required.

Reporting to the Waterjet Quality Manager, the Waterjet Inspector will be responsible for inspecting aerospace / gas turbine engine components for compliance with engineering drawings, customer requirements and company specifications. Accountable to approve items within specifications and recommend disposition of items not meeting standards. Will adhere to all quality standards. Requirements: * Must be able to use standard gauges (micrometers, height gauges, calipers etc.) * Must have a strong math background * Must have HS Diploma or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Demonstrated ability to effectively perform assigned tasks and interpret results of inspections * Must be able to interpret geometric dimensions and tolerances * Ability to meet critical deadlines and work in fast paced environment * Basic to Intermediate proficiency in MS Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information clearly verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends * Must be willing to work a swing shift, if required * Ongoing FAA Testing and Training Mandatory * MTI is a safety sensitive manufacturer. As such, successful results of FAA drug testing will be required. Preferable Experience: Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 25% of the work day). The employee must frequently lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #4151301125WJ to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job Title: Inspector OEM Duration: Feb 26 - May 26 (Temp to hire) Pay range: 20.00 - 21.53 USD/Hourly Responsibilities: Perform routine checks, tests, gauging and instrument inspections of materials, parts in process and finished parts. Performs routine tests on materials, goods in process or finished goods where results are compared with company quality standards. Performs visual inspection for obvious defects. Record results on inspection forms or charts and reports number of defects found. Some lifting of items of various weights, both assisted and unassisted. Ability to understand blueprints, operation sheets, and procedures. Use of standard measuring equipment including micrometers and indicators;Calipers, height gage. Qualification: 1-2 years of experience as an inspector and/or NDT technician. Able to communicate verbally and/or in writing with other workers, members, or supervision, and others as necessary. Edcation: High school diploma or equivalent required.

Aviation Repair QC Inspector Job Description CTL Aerospace is a full service NADCAP certified composite-manufacturing company providing services to the major aerospace and governmental organizations since 1946. CTL specializes in the manufacturing of Fiber Reinforced Polymer Structures. We are seeking talented professionals to work in a fast-paced, team-oriented environment as an Aviation Repair QC Inspector at our northern Cincinnati, Ohio location (less than 30 minutes from Dayton and/or northern Kentucky). Experience in aircraft turbine engine component repair. Experience in composite component manufacture or repair. Experience within aerospace or aviation repair or manufacture field. Proficient in the use of precision measuring hand tools to measure component defects. The ideal candidate will be flexible to perform other visual inspections as needed such as preliminary, hidden damage, in-process, and final inspections on metal/composite civil aviation articles with the current technical data provided in the manufacture's instructions for continued airworthiness, Service Bulletins, service letters, Airworthiness Directives, government and industry standard practices, and other data acceptable and approved by the FAA. Evaluation of hardware at designated steps throughout the repair process. Inspection of hardware from outside processes. Job Requirements The individual will be thoroughly familiar with the scope and limitations of the method in which is being performed. The individual will be able to organize, and inspection findings results and be familiar with the codes, standards and other contractual documents that control the method being utilized. CMM Drug Free Workplace. FAA Regulations. Measurement Tools. Visual Inspection. Inspection in any field with the use of calibrated measuring equipment. Inspection in any field with composite/honeycomb, materials. Airframe and Powerplant license preferred (but not required). Aviation, aerospace, or industrial turbine engine manufacture/repair/inspection experience preferred. This position requires you to undergo a DOT/FAA pre-employment drug test for the following prohibited drugs (as defined in 49 CFR § 40.3) prior to being hired or transferred into a Department of Transportation (DOT) safety-sensitive position as defined in 14 CFR part 120[1]: • Marijuana, • Cocaine, • Opioids, • Phencyclidine (PCP), and • Amphetamines. ________________________________________ [1] A safety-sensitive function, as described in 14 CFR part 120, §§ 120.105 and 120.215, includes a flight crew member, flight attendant, flight instructor, aircraft dispatcher, aircraft maintenance or preventive maintenance, ground security coordinator, aviation screener, air traffic controller, and operations control specialist. CTL Aerospace will provide a pay rate commensurate with experience and an excellent benefits package. To learn more about our company, please visit **************************** CTL Aerospace is an EEO/M/F/Disability/VET and Drug Free Employer Veteran Founded Small Business

Aerospace QC NDT Inspector Overall Summary of Job Quality Control Inspector's role is to ensure all repairs and operations are in compliance with FAA /EASA / ISO / AS and company's guidance. This individual has the responsibility and authority to carry out assigned tasks. Essential Functions Ensure company procedures and FAA/EASA /ISO/AS Standards are followed, records maintained, forms and required paperwork. Ensure all repairs are in compliance with FAA regulations. Control and maintain technical documents and publications. Perform calibrations, read and interpret blueprints and specifications. Initiate and participate in corrective actions, rework problem solving and audit processes. Perform dimensional / visual inspections using standard inspection gages and CMM Perform FPI and UT inspections Promote an attitude to serve the customer, instilling a sense of urgency throughout the Inspection Department Minimum Qualifications: Graduation from high school and Technical School and three years of experience minimum in a variety of trades or any equivalent combination of education and experience which would provide the required knowledge, skills, and abilities. Ability to work from sketches, drawings, and blueprints. Ability to follow oral and written instructions and to communicate effectively. Complete understanding of current NDI procedures. Ability to work cooperatively with others. Excellent work history and attendance record. Pre-employment drug screen required.