Top Inspector Skills

Below we've compiled a list of the most important skills for an Inspector. We ranked the top skills based on the percentage of Inspector resumes they appeared on. For example, 22.4% of Inspector resumes contained Magnetic Particle as a skill. Let's find out what skills an Inspector actually needs in order to be successful in the workplace.

The six most common skills found on Inspector resumes in 2020. Read below to see the full list.

1. Magnetic Particle

high Demand
Here's how Magnetic Particle is used in Inspector jobs:
  • Contributed expertise in the utilization of magnetic particle inspection and dielectric test inspection techniques for telephone bucket trucks.
  • Maintained and calibrated magnetic particle and florescent inspection equipment.
  • Certified for Magnetic Particle and Ultrasonic thickness inspection.
  • Monitored certification of NDE personnel for processes including LPT, Magnetic Particle, RT, VT, and UT.
  • Inspected all flaw indications from these systems using the following methods: visual, magnetic particle, ultra sonic.
  • Conducted ultrasonic and magnetic particle weld inspections on land and on platforms in the Gulf of Mexico.
  • Performed Magnetic Particle and Ultrasonic inspection on various castings to meet the specifications of the customers needs.
  • Created and implemented new format of magnetic particle technique sheets resulting in an easier elaboration of these.
  • Perform visual inspections while others perform electronic inspections by using x-ray, ultrasonic, magnetic particle.
  • Perform Magnetic Particle Inspection on various tools and equipment used in the oil and gas industry.
  • Rope access RT technician capable of performing ultrasonic, magnetic particle, and liquid penetration testing also
  • Calibrated test equipment such as magnetic particle, x-ray and ultrasonic contact machines to standard settings.
  • Repaired and maintained equipment used on the inspection jobs and currently Magnetic Particle Inspection certified.
  • Worked as a Certified SEA Magnetic Particle Inspector on oil field pipe and tubing.
  • Completed testing on the ends of each rail through use of Magnetic Particle Tests.
  • Performed Liquid Penetrate Testing, Magnetic Particle Testing, and also Ultra Sonic inspection.
  • Wet Fluorescent magnetic Particle Inspections of welds using portable yokes to induce longitudinal magnetism.
  • Wet Fluorescent Magnetic Particle (WFMT) inspection of the internal welds.
  • Perform non-destructive testing such as ultrasonic, visual or magnetic particle.
  • Perform wet Magnetic Particle inspections in areas called out in spec.

Show More

2. Safety Procedures

high Demand
Here's how Safety Procedures is used in Inspector jobs:
  • Contacted and scheduled site visits evaluating and if necessary correcting safety procedures to assure safe working conditions for life and property.
  • Follow all safety guidelines established by the Company, including proper use of safety equipment and relevant safety procedures.
  • Followed all established safety procedures and used proper Personal Protective Equipment as required.
  • Maintain productive working relationships with team members and strictly adhere to/follow safety procedures.
  • Performed assigned tasks and functions in accordance with established safety procedures.
  • Created quality and safety procedures and performed departmental audits.
  • Executed daily operations of housekeeping and safety procedures.
  • Follow appropriate safety procedures for inspecting dangerous goods.
  • Maintain mandatory CTA workplace guidelines and safety procedures.
  • Monitored and ensured safety procedures were followed.
  • Trained Avionics Technicians on proper safety procedures.
  • Monitor safety procedures at construction sites.
  • Enforce regulatory compliance and ensure that all work is carried out in accordance with safety procedures, permits, and regulations.
  • Inspect materials, products, or equipment operations or work and safety procedures, or assign employee training to experienced workers.
  • Assisted supervisors by training fellow employees on machinery, correct job safety procedures, paperwork, and maintenance files.
  • Work required the analysis of facility uses to ensure there are no conflicts that would violate standard safety procedures.
  • Conduct employee training in equipment operations or work safety procedures, or assign employee training to experienced workers.
  • Completed required reports of the inspection process within mandated time lines; reviewed and followed safety procedures.
  • Assisted with employee training in equipment operations or work and safety procedures, policies or guidelines.
  • Administered the inspection process and ensured that all safety procedures are followed in the work area.

Show More

3. Final Inspection

high Demand
Here's how Final Inspection is used in Inspector jobs:
  • Perform complete final inspection of aircraft engine components to assure that the product conforms to customer requirements and engineering specifications.
  • Perform final inspections on piping and instrumentation supports to verify all material used and dimensional checks on completed supports.
  • Supervised 10 employees and ensured all preparatory cleaning was adequately accomplished as conducting final inspection following application of preventatives.
  • Witnessed Final Inspection of liner hanger components and down hole completions equipment per customer requirements.
  • Conducted in process and final inspections utilizing various gauging equipment along with performing required calibrations.
  • Performed in-process and final inspections of equipment as a Quality Assurance Representative for 116 technicians.
  • Performed a variety of PCB and new-build assemblies utilizing a microscope* Post-wave inspection* Final inspection
  • Perform final inspection and review documentation to ensure end product meets customer requirements.
  • Perform Final Inspection and review documentation required for end-item shipments.
  • Complete documentation for incoming, in-process and final inspection.
  • Performed initial, in-progress, verification and final inspections.
  • Perform in-progress/final inspections on maintenance completed by maintenance personnel.
  • Performed final inspection and in-process inspection on composite parts.
  • Perform in-process and final inspection of manufactured products.
  • Utilize client specific manufacturing guidelines for final inspection.
  • Entered daily quality incoming and final inspections.
  • Conducted final inspections with T-Mobile Operations.
  • Facilitate final inspection of work completed.10.
  • Removed nonconforming product and final inspection.
  • Reconcile final inspection documentation for shipments.

Show More

4. Inspection Process

high Demand
Here's how Inspection Process is used in Inspector jobs:
  • Evaluated and analyzed Inspection processes and developed and facilitated new inspection and compliance methodologies to streamline the inspection and managements programs.
  • Calibrated inspection equipment with fine detail to ensure correct functionality throughout the inspection process.
  • Communicated inspection process and findings with insurance adjusters, contractors and home/building owners.
  • Streamlined inspection process, with more timely recommendations and minimal mission impact.
  • Contributed to development of more relevant inspection process and enhanced FBI operations.
  • Evaluate inspection process to find opportunities to improve quality and operational efficiency.
  • Use precision measuring instruments when required during inspection processes.
  • Develop inspection process around work requirements and reporting process.
  • Calibrated and adjusted equipment necessary for inspection processes.
  • Prepared necessary documentation of inspection process.
  • Create Quality report explaining inspection process and tools used and whether the component pass or fail each process.
  • Monitored the inspection process with the help of various computer programs such as permit tracking software.
  • Trained newly hired inspectors on the aspect of the inspection process at Community Residential Care Facilities.
  • Worked with managers to upgrade branch documents to facilitate a more efficient inspection process.
  • Volunteered my services to other housing authority to help them complete their inspection process.
  • Work with dimensional machines, laser etch, scope work for final inspection process.
  • Reviewed work of 30 co-inspectors for adherence to prescribed procedures in the inspection process.
  • Maintain accurate record of all inspection processes in accordance to company's protocol.
  • Supervised the inspection process and suggested essential changes according to the product demand.
  • Monitored the inspection process and recommended necessary changes if the product demands it.

Show More

5. Customer Service

high Demand
Here's how Customer Service is used in Inspector jobs:
  • Certified Emissions Inspector/Customer Service Representative - Responsible for testing vehicles for emission related problems while following EPA rules and regulations.
  • Forged strong relationships with clients through expertise in identifying specific needs and delivering exceptional customer service.
  • Provide excellent customer service in completing transactions efficiently and in a friendly and professional manner.
  • Identified multiple areas of improvement that have translated into greater customer service and increased revenue.
  • Inspect for evidence of termite infestation and present homeowner or business with exceptional customer service.
  • Provide exceptional and professional customer service to customers and vendors while ensuring effective communication.
  • Deliver excellent customer service by providing assistance to public on housing-related inquiries.
  • Performed several office management roles, including document processing and customer service.
  • Provided superior customer service by attending to customers efficiently and effectively.
  • Provided best-in-class customer service and helped identify solutions to customer problems.
  • Demonstrate integrity and excellent customer service when interacting with residents.
  • Provided strong customer service with highly motivated attention to detail.
  • Answered customer service concerns regarding company policies and procedures.
  • Interacted with home/auto owners and provided excellent customer service.
  • Referred by numerous customers for professionalism and customer service.
  • Delivered excellent customer service when performing in-home pest inspections.
  • Provide superior customer service to dealerships and private citizens.
  • Conducted interviews with policyholders to ensure stellar customer service.
  • Provided superior customer service through effective and attentive listening.
  • Provided customer service/satisfaction by delivery after inspection of parts.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. API

high Demand
Here's how API is used in Inspector jobs:
  • Perform API internal/external inspections and generate reports with repair recommendations.
  • Entered data associated with baseline inspections using UltraPIPE software.
  • Pulled/transported chemical samples adhering to API/DOT guidelines.
  • Created automated programs for rapid 3-dimensional inspection.
  • Administered operating and capital budgets.
  • Review all hornet, inspect for the exact color wiring, taping conduit * Check for quality control on each hornet.
  • Created and Administered purchase requisitions for services and construction materials used in the operations of the Mowing and Landscaping Services Department.
  • Perform Ultrasonic testing and inspection for API 570 above ground piping API 653 tank inspections, settlement survey on fuel tanks.
  • Interpreted Engineering drawings to ensure that test plan is understood and conducted in compliance with API and ASME Codes.
  • Worked at a rapid pace to meet tight deadlines, and banded, wrapped, packaged and cleaned equipment.
  • Trained a new Apiary Inspector during the season as well as speaking at various Beekeeping Associations throughout the state.
  • Hired for the position of API 510/570/653 inspector to commence in Deer Park, Texas for DOW Chemical Company.
  • Collected and entered specific miasma (gas) escaping from any aperture located on gas meters and structures.
  • Provided rapid response with the ability to deploy within 24 hours to any specified destination in the country.
  • Conducted corrosion under insulation inspection (CUI) utilizing the principles of API 583 Corrosion Under Insulation and Fireproofing
  • Ensured that weld sizes in nozzle reinforcement and attachment welds at opening meet API codes in section VII.
  • Direct Management of annual $3 million budget, including capital, operating, and salary expenses.
  • Experience working with tolerances .0005, experience with various threads types (API and premium threads).
  • Involved in a wide range of inspections as an API 653 Tank Inspector and asset integrity inspector.
  • Performed visual inspections, reviewed NDE results and made recommendations in accordance with API and ASME standards.

Show More

7. Car Parts

high Demand
Here's how Car Parts is used in Inspector jobs:
  • Inspected different incoming car parts using different gauges Production worker
  • Detected and reported unsafe/unreliable car parts.
  • Inspect car parts before shipping sometime machine packer pull objects off line place in containers to be shipped check for bent prongs
  • Inspected various car parts, seats belts, arms and head rest: Adapted quickly to new assignments and procedures.
  • Inspect car parts for scratches and damaged parts, and further molded car parts regulated by company and state standards.
  • Ensured car parts were not damaged prior to assembly, welded louvers, and met daily and monthly quotas.
  • Inspected car parts, operated machinery, cleaned designated areas each day, fast paced and detail oriented environment.
  • Worked in a teamwork environment inspecting car parts to ensure the correct components were attached with no defects.
  • Inspect and certify car parts for Chrysler automotive; Check for defects, properly prep parts for shipping.
  • Inspected car parts for the Nissan vehicles that included exterior parts, electrical parts, and transmission diagnosis.
  • Company: Select StaffingDuties: inspect car parts worked on line as well inspecting car seats.
  • Set up plastic car parts to get platted in nickel, copper and other metals etc.
  • Inspected car parts for defects and made sure quality of materials were correctly packaged for shipping.
  • Inspect car parts before they are shipped off to the plant manufacturers to be placed in cars
  • Charged with inspecting car parts to ensure quality control standards are maintained during assembly and packing.
  • Inspected car parts for various issues and fixed them (if possible) using various tools
  • Inspect various car parts for foreign vehicles seven days a week twelve hours a day.
  • Identified root causes of defects on car parts and recommended processing adjustments to eliminate them.
  • Inspect rails to go on top of cars also inspected car parts and operated some machines
  • Inspected all car parts, look for damages such as scrapes 100% Vision is required

Show More

8. Quality Standards

high Demand
Here's how Quality Standards is used in Inspector jobs:
  • Conduct comprehensive visual inspections of welded components to identify surface flaws while strictly complying with exacting, government-mandated quality standards.
  • Maintained quality standards by approving incoming materials, in-process production, and finished products as appropriate and recorded quality results.
  • Maintained high quality standards inspecting product for customer satisfaction using preset criteria and data entry system.
  • Demonstrated experience inspecting to quality standards.filling Hopper.filling in for others while on break.
  • Inspected finished product for proper component attachments/adhesion of tape and quality standards.
  • Repeated inspection procedures until product met quality standards and specifications were attained.
  • Supervised quality standards by approving finished products prior to shipment.
  • Examined upholstery fabric for confirmation to specification and quality standards.
  • Inspected manufacturing area to maintain cleanliness and quality standards.
  • Maintained a safety and quality standards that exceeded company requirements
  • Maintained high quality standards for machinery and working environment.
  • Examined material to insure it met quality standards
  • Perform and document routine inspections to raw materials and finished products to ensure product compliance with all quality standards and specifications.
  • Back up initial auditor- checked to make sure mailbags met quality standards before being shipped back to the postal service.
  • Inspected units to ensure safe and descent is in accordance with the Housing Quality Standards as required by HUD.
  • Inspect the properties to ensure that they are in accordance to the Housing and Urban Development and Quality Standards.
  • Inspected all Section 8 Rental Assistance units to meet US Department of Housing and Urban Development housing quality standards.
  • Inspected Ford Engine Blocks for defects using specific gauges to ensure the engine block meets the Manufacturers quality standards.
  • Maintain quality standards through inspection of incoming materials, in-process production and finished products; record quality results.
  • Determine compliance with local housing codes and HUD Housing Quality Standards, document deficiencies and file written reports.

Show More

9. Inspect Parts

high Demand
Here's how Inspect Parts is used in Inspector jobs:
  • Job duties-inspect parts using micrometer and machine operating
  • Inspect parts of cabinets for cracks, bows, and other flaws that may be in the components of cabinets.
  • Inspect parts before and after metals processing, Packaging and shipping of completed orders, Precondition cast steel shot.
  • Traveled to different manufacturing sites to inspect parts for small and large factories such as GM, and Chrysler.
  • Job duties were to inspect parts for any damage, shorts, flash or any other missing pieces.
  • Inspect parts to make sure they are good to ship out and do the according paper work.
  • Inspect parts off the line Gage parts with correct tools Keep accurate records of scrap and finished product
  • Assemble small parts, inspect parts for defects, and pack material for shipping, record inventory
  • Magnetize parts, magnetically inspect parts, make sure magnets are exceeding to customer specs.
  • Unload parts, inspect parts, read and interpret process sheets and maintain production paperwork.
  • Inspect parts and put parts on skids, separate parts, then tag for shipping.
  • Inspect parts for imperfections, work on line doing final inspection of parts being ran.
  • Inspect parts under a special light for technology equipment package and get ready for shipping
  • Inspect parts in accordance with established test programs, calibration standards and inspection plans.
  • Inspect parts before loading them onto the train and take necessary parts to the line
  • Inspect parts to ensure safety and 100% quality when delivered to our customer!
  • Inspect parts visual and various gauges, pack to customer spec, and daily cleaning
  • Inspect parts and make sure there up to quality and the correct standards.
  • Inspect parts for defects after they are filed and before they are packaged.
  • Inspect parts and assemblies at various stages to verify accuracy to given blueprints.

Show More

10. Assembly Line

high Demand
Here's how Assembly Line is used in Inspector jobs:
  • Performed warehouse labor work-Inspected final product-Worked on assembly line-Stocked, shipped, and inventoried
  • Performed production-related tasks on a fast-paced assembly line and individual work station.
  • Recovered metal products from assembly line
  • Lead the assembly department which included: 12 assembly lines, 3 repair stations, 3 inspectors and 32 operators.
  • Performed inspections of product from the assembly line, insuring accuracy and quality of all product leaving the plant.
  • Assisted the Quality Engineers with containment issues and created and posted Quality Alerts in the appropriate plant assembly line.
  • Inspected batteries on assembly line & disposed of batteries that did not meet quality standards - Successfully trained new hires
  • Removed automobile parts from an assembly line and inspected them for missing paint and defects before they were installed.
  • Inspected parts coming off assembly line for bad welds and any other defects and placed into finished goods bins
  • Inspected, tinted, packaged, and cleaned contact lenses on assembly line in a clean room environment.
  • Tapped and drilled holes in car doors on assembly line at HondaCalibrate parts and work with different hand tools
  • Inspected cameras from the assembly line to see if they had any defects before shipping them out.
  • Inspect car parts as they come off assembly line, filled out required paperwork and did rework.
  • Worked on assembly line *Inspect PC/Circuit boards *Blue prints/ solder components *keep track of inventory *Stocked components parts
  • Promoted to oil pan inspector on assembly line, visual and gauge inspection, packed finished product.
  • Worked on assembly line in the manufacturing of automotive bearings Inspected bearings for quality Packed bearings for shipment
  • Maintained a steady speed while inspecting parts going down the assembly line fresh off the press.
  • Worked in Jingle in various positions on assembly line, also in a fast paced environment.
  • Team Leader Inspect car on assembly line to ensure assembling of the parts on the vehicle.
  • Inspected phones for defects & abnormalities, then passed them on to the next assembly line.

Show More

11. NDT

high Demand
Here's how NDT is used in Inspector jobs:
  • Designated Quality Assurance Inspector for fabrications (welding/NDT/dimensional) of Nuclear components.
  • Determine NDT methodologies for applications, measuring instrument's to be used and required adjustments (Calibration) based on blueprints.
  • Performed receiving, preliminary, visual, dimensional, in-process, NDT and Final Airworthiness Inspections of components within the repair station
  • Performed NDT on aircraft and aerospace components in house and throughout Florida and the Caribbean, also certified to weigh aircraft.
  • Train Inspectors on procedures and inspection criteria Inspect various military and commercial engine parts using various forms of NDT.
  • Selected, calibrated, or operated equipment used in the non-destructive testing (NDT) of products or materials.
  • Maintain daily logs and defect maps to maintain accountability of everything from NDTE requirements to defect location.
  • Examine structures or vehicles such as aircraft, and trains using non-destructive testing (NDT) techniques.
  • Instructed and supervised NDT trainees and level I inspectors in accordance with SNT-TC-1A guidelines and regulations.
  • Performed concrete testing, soil testing, compaction testing, NDT, and radiation monitoring.
  • Selected to conduct on-job training of newly hired NDT inspectors and quality assurance Engineers.
  • Develop or use new non-destructive testing (NDT) methods such as leak testing.
  • Lead NDT Technician overseeing Heat Treat services, experience with post weld heat treat
  • Performed dimensional audits, as well as in-process dimension checks and NDT inspections.
  • Weld mapping and setting up all NDT to be performed on each job.
  • Prepare safety presentations and conduct safety meetings with QTS NDT technicians when assigned.
  • Monitor repair work on welding and NDT in ensuring compile with client specification.
  • Rope Access NDT Technician, Deals directly with client or asset manager.
  • Maintain records of all NDT, and coordinate with client Quality Control.
  • Determine accept/reject decisions on NDT inspections in conjunction with the engineering team.

Show More

12. PT

high Demand
Here's how PT is used in Inspector jobs:
  • Promoted to Acceptable Quality Limit Inspector while maintaining existing job scope as Production Control Coordinator and Inventory Specialist.
  • Make determination of casting acceptance based on tolerances and machine stock based upon customer specification.
  • Completed necessary procedures to satisfy licensing requirements and indicated concurrence with acceptance and rejection decisions.
  • Lead 12 investigations/inspections prompted by information or complaints received as part of a Congressional Inquiry.
  • Conducted research to gather information regarding water consumption and laboratory analysis history.
  • Performed property inspections on foreclosed and bankrupt properties as a subcontractor.
  • Verified and documented descriptions of any product damages or missing materials.
  • Conducted visual and measurement tests rejecting and returning unacceptable materials.
  • Developed and implemented munitions materiel management concepts and procedures.
  • Created Final Certification of Completeness forms for accepted products.
  • Verified paper receipts against actual inventory received by ship.
  • Inspected products and rejected/accepted based on quality.
  • Facilitated fiber optic guidelines for future town builds
  • Indicate acceptance or rejection on production documentation.
  • Marked electric motors with acceptance-rejection status.
  • Work included full and partial depth deck repairs, substructure repairs, pier and column reconstruction and bearing repair of replacement.
  • Initiated quality records, test data and other associated paperwork required for accomplishment, acceptance, rejections and movement of material.
  • Designed standardized inspection process for laptops (both PC and MacIntosh), while elevating the level of chief laptop inspector.
  • Inspected mirrors for vehicles, moved at a fast pace, kept track of the mirrors that had a defect.
  • Inspect account books and accounting systems for efficiency, effectiveness, and use of accepted accounting procedures to record transactions.

Show More

13. Data Entry

high Demand
Here's how Data Entry is used in Inspector jobs:
  • Inspected/Sterilized various ocular lenses Data Entry Shipping & Receiving Maintained a safe and cleanly work environment
  • Performed supply tracking through daily data entry to increase company organization.
  • Utilized computer PC terminal for data entry of updated licensee information.
  • Code inspections, Data entry/collection, Application filing/processing, Secretarial assistant
  • Conducted data entry of all summons into a computer database system
  • Maintained data entry/record keeping electronically & by documents.
  • Logged inspections/ data entry into computer.
  • Performed computer data entry with accuracy.
  • Complete data entry for all documented information
  • Exhibited proficiency in data entry.
  • Inspected vacant and occupied rooms, Filing, Data Entry, Supervise, Pull out paperwork, and Clean rooms at times
  • Prepared documents, data entry, typing, email software, internet browser, personal computers, and word processing software.
  • Inspected submarine welds for quality control compliance/tolerance to state, corporate and client blue prints/specifications; Reported/data entry of my work.
  • Check engravings and color keys for mistakes and flaws*Take measurements off color keys*Data entry of findings for distribution to other departments
  • Process and complete shipping orders through data entry, measure and inspect various fabrics according to customer requirements and guidelines.
  • Help Vacation Rental Inspection Coordinator with various task as needed, inspecting, data entry, scheduling and running reports.
  • Assembled small parts for a production line - Data entry for inventory - Monitored inventory for inbound and outbound manufactured parts
  • Inspect international and domestic product upon and before leaving the distribution center, data entry, random inspections and audits.
  • Supervised and trained a supply team of twelve or more for Data Entry/SAMS-E clerks in various locations.
  • Operated keyboard and other data entry device to enter data into computer or onto magnetic tape disk.

Show More

14. Liquid Penetrant

high Demand
Here's how Liquid Penetrant is used in Inspector jobs:
  • Performed various inspection types including magnetic particle, liquid penetrant, bi-directional yoking, visual inspection and ultra-sonic testing.
  • Supported different repairs with Liquid Penetrant Testing and Magnetic Particle Testing.
  • Performed Liquid Penetrant Inspections and material Analysis using spectrometer.
  • Specialized in liquid penetrant and non-magnetic material inspection.
  • Possess Level 2 certification as liquid penetrant inspector.
  • Tested the ends of a pipe using MT wet florescent, liquid Penetrant and visually identified or locate discontinuities e.g.
  • Performed liquid penetrant, magnetic particle, ultrasonic thickness, and visual inspections on piping storage tanks and various vessels.
  • Certified to Level II in accordance with ASNT SNT-TC-1A in visual, magnetic particle, and liquid penetrant methods.
  • Work included Visual, Ultrasonic Thickness, Mag Particle, and Liquid Penetrant inspections on various piping vessels.
  • Performed inspections on products with the help of non destructive testing methods such as liquid penetrant and UT.
  • Conducted and directed the training and examinations of personnel in Magnetic Particle and Liquid Penetrant testing methods.
  • Perform Liquid Penetrant and Magnetic Particle inspections as required on welds, machined surfaces, and structures.
  • Performed Visual Inspection of welds and Liquid Penetrant Testing to ensure the quality of the product.
  • Perform Magnetic Particle/Liquid Penetrant inspections, as well as third-party inspections to tools that required testing.
  • Check for fine cracks, porosity, and incomplete fusion of weld using liquid penetrant method.
  • Maintained Liquid Penetrant Level One certification and performed or assisted in other NDT disciplines as needed.
  • Attained Level II Certification for Liquid Penetrant, Particle Mag and Level I X-Ray Technician.
  • Processed parts in fluorescent liquid penetrant which allows discontinuities to glow under black light.
  • Worked in liquid penetrant and magnetic particle testing in a small lab facility.
  • Perform Magnetic Particle and Liquid Penetrant Inspections on a day to day basis.

Show More

15. Inspection Reports

average Demand
Here's how Inspection Reports is used in Inspector jobs:
  • Enhanced quality control/assurance by analyzing inspection reports and evaluations, application of codes, and standards and specification.
  • Generate detailed inspection reports to client regarding findings and recommendations for repair of fixed equipment.
  • Gather contractor and sub-contractor information to compile into written inspection reports and performs related duties.
  • Organized estimate records and filed inspection reports to help with maintaining accountability of audits.
  • Meet customer requirements by performing quality manufacturing specifications* Maintain inspection reports for availability and review
  • Compile inspection reports and documentation related to the control of fabrication control.
  • Prepared electronic inspection reports with photographs integrated within the inspection text document.
  • Created inspection reports for counties patrolled and testing of regulated decontamination chemicals.
  • Provided third party inspection reports of petroleum-chemical products to Dow and customers.
  • Communicated to supervisors and engineers the status/results of Inspection reports.
  • Recorded inspection reports describing results, recommendations, and needed repairs
  • Drafted home inspection reports including recommended repairs and estimated costs.
  • Document inspections and ensure local governments receive inspection reports.
  • Organize inspection reports and measurement data on pressure equipment.
  • Formulated and mailed all residential property inspection reports.
  • Developed and maintained daily and weekly inspection reports.
  • Prepared detailed inspection reports for public record.
  • Produced daily inspection reports and verified documents.
  • Generated customer daily logs and inspection reports.
  • Submitted inspection reports to corporate office.

Show More

16. CMM

average Demand
Here's how CMM is used in Inspector jobs:
  • Inspected plastic injection molded parts using CMM, micrometers, calipers, height gauges & various go/no go gauges.
  • Operate several CMM machines while managing other NDT inspection operations during CMM run Cycles.
  • Generate CMM programs both on and off-line with the use of CAD Models.
  • Set up, programmed and ran Coordinate Measuring Machine (CMM)
  • Trained Certified Operators and Quality Assurance Inspectors how to use CMM.
  • Verify out of tolerances with hand tools and Manual CMM.
  • Conducted CMM inspections at different locations for in house products.
  • Write inspection program for both manual and automatic CMM machines.
  • Assisted the CMM programmer with developing programs and set-ups.
  • Utilized micrometers, calipers, various gauges and CMM.
  • Certified to run CMM Inspection Machine and inspection robots.
  • Utilize CMM to check aerospace hardware for 25 years.
  • Trained employees to use CMM in operator mode.
  • Created CMM programs for components and assembly dies
  • Operated CMM for inspection of complicated parts.
  • Operate Coordinate Measuring Machine (CMM).
  • Conduct CMM inspection of parts as assigned.
  • Program and operate DCC-CMM using PC-DMIS software.
  • Used measuring tools and operated CMM.
  • Experience with CMM inspection and programming.

Show More

17. NDE

average Demand
Here's how NDE is used in Inspector jobs:
  • Enforced State and Federal water quality regulations related to erosion and sediment control Best Management Practices under the Colorado MS-4 Permit.
  • Sampled storm water discharges and completed monthly Discharge Monitoring Reports under the National Pollutant Discharge Elimination System.
  • Performed home inspections after Hurricane Katrina Interviewed home owners Worked independently in remote areas without direct supervision
  • Collected water samples for laboratory tests to identify contaminants and recommended appropriate control measures.
  • Monitored contractor's construction crews activities that performed excavation for installation of underground FOC.
  • Attended several training courses on marine safety and proper disposal of contaminated materials.
  • Recommended testing of chemical and other constituents, and determined appropriate sampling protocols.
  • Establish techniques for proper examination of objects under inspection for safety regulations.
  • Prepare written reports on inspections conducted and recommended actions to correct violations.
  • Supervised Discharge Superintendence / Tally of general cargo and containers.
  • Analyzed waterways to identify engineering problems and recommended corrective actions.
  • Maintain a personal website independently for assigned inspection work.
  • Inspected residential and commercial properties for major insurance underwriters.
  • Presented unresolved issues to independent tribunal for final judgment.
  • Utilize and apply knowledge and understanding of industry safety standards
  • Attended continuing education classes to stay updated with industry standards
  • Followed all production safety regulations in the bindery area.
  • Divided cargo received by account number and intended location.
  • Worked under limited supervision following standardized practices and methods.
  • Stepped in as Reserve Officer-in-charge during extended position vacancy.

Show More

18. Ensure Compliance

average Demand
Here's how Ensure Compliance is used in Inspector jobs:
  • Conduct preliminary environmental field inspections of industrial and commercial enterprises to ensure compliance with the Environmental Control Ordinance of Cook County.
  • Conducted inspections of residential and commercial areas to ensure compliance with county codes and ordinances and investigated reports of illegal activities.
  • Maintained a facility of 150 storage units by conducting daily inspections to ensure compliance with company security and sanitation standards.
  • Formulate, and recommend necessary implementing instruction and performs inspections to ensure compliance or uniform application of security programs.
  • Provide inspection specific reports for each individual mortgage company to ensure compliance with the mandated government mortgage guidelines.
  • Perform weekly inspections in Commercial and Residential construction settings to ensure compliance with environmental ordinances plans and specifications.
  • Performed thorough inspections of residential and commercial structures to ensure compliance with building codes and safety regulations.
  • Identified and recommended solutions for deficiencies in voter communications, to ensure compliance; eliminating potential complaints.
  • Perform inspection services on various nuclear and non-nuclear shipboard systems to ensure compliance with applicable specification.
  • Conducted biennial inspections of medical facilities to ensure compliance with Virginia law concerning medical safety.
  • Assisted project managers to ensure compliance with contract documents, safety requirements and regulatory standards.
  • Developed and implemented quality control and ground safety programs to ensure compliance with contract specifications.
  • Monitor practices of cross-docked deliveries to ensure compliance of company safety and sanitary standards.
  • Inspected facilities and facility records to ensure compliance with Federal and District regulations.
  • Perform inspection services on various industrial components to ensure compliance with applicable specification.
  • Monitored hazardous material to ensure compliance with the Environmental Protection Agency standards.
  • Inspected and monitored sewer installations to ensure compliance with requirements and specifications.
  • Monitor the activity of subcontractors to ensure compliance with drawings and specifications.
  • Inspect automotive vehicles to ensure compliance standards and governmental regulations for Chrysler.
  • Inspected automotive vehicles to ensure compliance to emission standards and government regulations.

Show More

19. Test Cases

average Demand
Here's how Test Cases is used in Inspector jobs:
  • Develop and execute test cases and test plans for Functional, Performance, Stress, and Regression testing needs.
  • Created complex test scenarios and managed the test cases to verify issue resolution and new processes.
  • Grouped Manual test cases in sets and scheduled them for execution using Quality center.
  • Implemented user acceptance testing with a focus on documenting defects and executing test cases.
  • Grouped Manual test cases in sets and scheduled them for execution using Quality center.
  • Case Lab - Test cases with acids to look for metal density.

Show More

20. Level II

average Demand
Here's how Level II is used in Inspector jobs:
  • Detailed and Conscientious Certified Quality Inspector level II with extensive knowledge of industry specifications and standards.
  • Experienced NDT trainee has just completed Level II NDT certification and is ready to commence work as a Level II trainee.
  • Carried out visual inspection of weld, NDT and interpretation of result besides verifying dimensions with supervision of a level II.
  • Help Level II Inspector make sure that he had all his equipment and help make sure everything was correct.
  • Performed Level II NDE in MT, PT, UTT and VT inspections on raw material and final product.
  • Level II Aerospace inspector certified in MPI (magnetic particle inspection) of major and critical aerospace components.
  • Level I & Level II Inspector in which I would inspect tubing and drill pipe for different companies.
  • Assisted my level II when we inspected, tested and measured materials, products and installations to spec.
  • Worked my way up to becoming a level II black light plus dye pen level II inspector.
  • Performed VT Level I, Level II, and Level III Inspection in accordance with ANSI/ASME Sec.
  • Received company level II certification in PT, MT (February) and RT (March).
  • Train Level I and Level II technicians; responsibilities include reviewing required NDT applications and results.
  • Assist Level II Inspector's in Ultrasonic and Radiography testing of pipes and vessels on platforms.
  • Level II Liquid Penetrate and Magnetic Particle Certified Worked on the F-14 and the Flexible Bus projects
  • Performed the duties of developing procedures and techniques for the approval of the level III.
  • Received Level II certifications (MT/PT/VT/New and Used Drill Pipe/Down hole handling tools and BHA)
  • Level II Inspection using MT and PT of 747-400 Aircraft parts for overhaul of CF6-80.
  • Level II testing of various components from a wide range of codes & specs.
  • Level I & Level II Inspector which my duties were to supervise five employees.
  • Help Level II make sure all the inspection was conducted and to code.

Show More

21. Corrective Action

average Demand
Here's how Corrective Action is used in Inspector jobs:
  • Communicated effectively with firm management, industry and regulatory agencies regarding corrective action and regulatory requirement enabling to be within compliance.
  • Performed internal audits; revised audit criteria according to mil-spec requirements and prepared audit reports with recommended corrective actions.
  • Exercise limited judgments in identifying workmanship and material defects; initiates appropriate disposition and corrective action.
  • Assist all inspectors in defect identification*Initiation of corrective actions*Responsible for determining root cause of problems.
  • Facilitated timely responses and effectiveness of 5-Why and 8-Discipline Corrective Actions and Customer Complaints.
  • Documented and reported inspection findings and results and monitor corrective actions to those findings
  • Reported quality data to quality engineering for use in reporting and corrective action.
  • Advised Senior upper management personnel of irregularities and recommended corrective actions for problems.
  • Evaluate problems and make initial recommendations for possible corrective action to supervise.
  • Evaluated munitions account condition, identified deficiencies, and initiated corrective actions.
  • Recorded and reported any corrective actions needed that may otherwise jeopardize underwriting.
  • Reviewed closed Non Conformance Records for adequate corrective action before releasing material.
  • Recommend and enforce corrective action measures when violation or potential violation occurs.
  • Recommend appropriate corrective action where security requirements are not being performed.
  • Performed aviation maintenance audits, document discrepancies and verified corrective actions.
  • Prepared deficiency and trend analysis reports and devised corrective actions.
  • Evaluated opportunities for defect prevention and implements preventative corrective actions.
  • Reported any defects to production and management for corrective action.
  • Analyze non-conformance trends to evaluate effectiveness of corrective actions.
  • Communicated deficiencies to Supervisors to ensure proper corrective action.

Show More

22. Sort

average Demand
Here's how Sort is used in Inspector jobs:
  • Sorted and/ or reworked non-conforming product to aid in eliminating defective product reaching internal and external customers.
  • Identified and sorted produce based on characteristic and organized into separate categories.
  • Sorted items and discard expired inventory.
  • Sorted and inspected parts for defects * Operated machinery for processing * Used quality tools such as calibers, micrometers for specification
  • Inspect and sort parts quality control, I pride myself for being on time a hard worker and ability to learn.
  • Inspected, tested, sorted, sampled, or weighed dairy products for defects, wear, and deviations from specifications.
  • Participated as a key member in the Receiving, Sorting, Pricing and Shelving of Donation to increase stores profitability.
  • Sorted finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work.
  • Sorted through the various products produced through the company taking out any product that was not up to standards.
  • Inspected and weighed products, sorted, placed rejects in separated pile and sent products that passed to shipping.
  • Inspected car components for defects, Trimmed and sorted car parts, Packed and labeled containment bins for shipment.
  • Wash, dry, and assort machine-cut parts, both rubber and plastic seals received from the machinist.
  • Sorted and sacked over 1 million books per week for mailing according to United States Postal Service guidelines.
  • Inspect, test, sort, and sample radiators for defects, wear, and deviations from specifications.
  • Assisted Haynes brand retail in store set up, stocking, sorting and organizing different brand name products.
  • Graded, classified, and sorted products according to sizes, weights, colors, and other specifications.
  • Delivered over 480 tons of munitions in support 180 aircraft sorties to defend the South Korean Peninsula.
  • Lead inspector on many projects ranging from condo towers to waste water treatment plants, to resorts.
  • Guaranteed the customer satisfaction expected of a five star resort by going above my duties to accommodate guest
  • Sample, sort, test, weigh, measure and inspect manufactured components and machine set up.

Show More

23. Automotive Parts

average Demand
Here's how Automotive Parts is used in Inspector jobs:
  • Inspect major automotive parts Packed and utilized computer for data purposes
  • Inspected automotive parts prior to their installation/Quality Control/Containment Sorts.
  • Repackaged automotive parts and correctly labeled them for shipment.
  • Inspect automotive parts/ general assembly/ press operator
  • Produce daily productivity of automotive parts
  • Inspected rubber automotive parts for defects
  • Sequence automotive parts for line assembly
  • Inspect automotive parts coming off the production line and fix any flaws to the product so they become usable.
  • Inspected numerous automotive parts ranging from bumpers to engines for manufacturers such as Ford Motor Company and General Motors.
  • Examine manufactured products (primarily automotive parts) to ensure they meet all standards of presentation and quality.
  • Inspect automotive parts for defect, log defected parts, packed and labeled parts for shipping.
  • Inspected automotive parts for any defects and worked on various production lines assembling components and cloth.
  • Separate defects and load good automotive parts into a box and stack on a pallet.
  • Job Description: I was responsible for the inspection and approval of various automotive parts.
  • Inspected, tested, or measured automotive parts, or work for conformance to specifications.
  • Inspect automotive parts keep data sheet of how many good parts and bad parts.
  • Inspected automotive parts for MS Companies as a third party sort at different facilities.
  • Prepared small automotive parts for employees on the assembly line in complete assembly process.
  • Deliver box truck with automotive parts and/or material to and from agencies and warehouse.
  • Inspect automotive parts for excess rubber, burs, grinder damage, etc.

Show More

24. Osha

average Demand
Here's how Osha is used in Inspector jobs:
  • Ensured unit compliance with applicable guidance such as Air Force Instructions, OSHA, safety, training, and environmental regulations.
  • Maintained the safety standards and safety training for my shop; Manager of monthly training for personnel, (OSHA).
  • Verify and sign-off on documentation for work completion and compliance with Company and OSHA standards, verify workplace analysis,.
  • Prepare stripping solution for different coatings by mixing hazardous chemicals; Adhere to OSHA safety guidelines and lab protocols.
  • Enforce all applicable OSHA regulations, Institutional, Construction/Contract Safety Regulations, ILSM requirements, NFPA Life Safety Codes.
  • Key responsibility was to assure all safety guidelines of REE, C-Spire Fiber, and OSHA was strictly followed.
  • Prepared kits for Hemophilia patients Followed and applied GMP, SOP, FDA and OSHA guidelines and regulations.
  • Managed shop Safety Program in insure compliance with Air Force Safety(AFOSH) & OSHA Safety Standards.
  • Worked directly with Management departments and employees to achieve a better understanding of OSHA and EPA requirements.
  • Trained on OSHA, MSDS and NFPA information and use blueprint to understanding of building layout.
  • Reported violations/better practice findings in accordance with EPA, OSHA, and Defense Logistics Agency standards.
  • Enforced warehouse safety programs within the department of defense, OSHA, and local regulations.
  • Warehouse Management/Transportation Supervisor (Certified U.S. Army/OSHA Safety) 9 years DOT, EPA.
  • Conducted Safety Monthly inspections under OSHA regulations as well as Office inspections for site.
  • Maintain a safe and healthy work environment by following OSHA standards and procedures.
  • Enforced all OSHA safety regulations, heavy load-box truck with air brakes deliveries.
  • Inspect integrity of scaffolds, that all scaffolds meet OSHA and plant standards.
  • Inspected cranes (mobile and standing) to OSHA compliance standards and specifications.
  • Cost estimating, prepared daily reports keeping with OSHA and state codes.
  • Created and implemented extensive safety programs to ensure DOD and OSHA compliance.

Show More

25. ISO

average Demand
Here's how ISO is used in Inspector jobs:
  • Rejected or approved clothing after inspection, verified reasons, generated discrepancy reports, and forwarded reports to supervisors.
  • Inspected any part with minimal assistance from supervisor and evaluated adherence to applicable process specifications and test procedures.
  • Established liaison with Facility Security Managers in order to determine the calculation of security levels in Federal facilities.
  • Assist resident engineer, project manager, coordinate with safety inspectors and project liaison regarding daily operations.
  • Review calibration recall records and coordinate with area supervisors to have equipment returned prior to expiration date.
  • Input work orders to designated computer program, assist supervisor with maintaining accurate account on inventory.
  • Testified in criminal court proceedings and agency briefings as necessary; liaison to law enforcement community.
  • Act as supervisor for multiple pipeline installations, structural fabrication and process facility hook-up projects:
  • Provided feedback on deficient areas and improvement recommendations to maintenance supervisors and senior managers.
  • Ensured AIL documentation was correct and coordinated with production supervisors to correct discrepancies.
  • Keep constant communication with unit inspectors and plant inspection supervisor on relative matters.
  • Functioned as administrative liaison to property managers, security support and administrative staff.
  • Review status of assignments and any follow-up action with manager and/or on-coming supervisor.
  • Notified department supervisor of operations or processes that were producing nonconforming material.
  • Communicate with Resort Services and Housekeeping Supervisors to request needed supplies.
  • Communicated required adjustments to production supervisor and other quality personnel.
  • Reported defective materials or questionable conditions to the department supervisor.
  • Project Supervisor for multiple gas gathering facility projects.
  • Worked independently with little to no supervisor oversight.
  • Documented and communicated quality issues with supervisor.

Show More

26. Inspection Results

average Demand
Here's how Inspection Results is used in Inspector jobs:
  • Developed and managed training programs, resulting in increased efficiency and excellent inspection results for equipment accountability and personnel administration.
  • Documented inspection results by completing reports and checklist criteria forms, summarizing rework and scraps inputting data into quality database.
  • Operated program regarding inspection results, recommended corrective procedures and compiled reports of results, recommendations and needed repairs.
  • Designed and taught various administrative classes which contributed to improved inspection results and administrative readiness throughout the Brigade.
  • Observed and monitored production operations and discussed inspection results with Machine Operators and recommended necessary corrective actions.
  • Document and transmit inspection results, making recommendations as appropriate for repair/upgrade/retirement of equipment.
  • Inspected returned materials * Recommended confirmation/denial of customer complaints based on inspection results.
  • Calculated percent defective on inspection results and reconciled components on batch record.
  • Coordinated all inspection results with the municipality representative and/or the client representative.
  • Provided quality reports and inspection results to senior managers and engineers.
  • Record inspection results and notifies cleaning personnel of inadequacies.
  • Recommend necessary corrective actions, based on inspection results.
  • Reviewed drawings and compiled reports reflecting inspection results.
  • Reported in computer daily all parachute inspection results.
  • Documented inspection results per company policies.
  • Complete electronic report based on inspection results
  • Recorded inspection results on designated forms.
  • Communicate inspection results to engineers.
  • Complete customer documentation for inspection results
  • Utilized DA Forms 2404, 2405 and 2407 to record inspection results and list required repair parts by nomenclature and NSN.

Show More

27. Pressure Vessels

average Demand
Here's how Pressure Vessels is used in Inspector jobs:
  • Developed all critical inspection monitoring activities and repair recommendations for process piping and pressure vessels.
  • Inspected pressure vessels for military applications.
  • Identified and internally/externally inspected piping, pressure vessels, piping stagnant zones, mix points, injection points and dead legs.
  • Performed 510 / 570 Inspections of Pressure Vessels & Piping associate with multiple MI projects & reported deficiencies as needed.
  • Perform internal and external inspections on piping systems and pressure vessels to identify, quantify, and assess damage mechanism.
  • Inspected above ground storage tanks, piping, pressure vessels and heaters and recommended repairs, furnished reports, etc.
  • Walk down of pressure vessels and piping systems to determine locations of CML's and access needed for upcoming turnaround.
  • Performed weld inspections, material inspections, and witnessed testing of National Board and ASME certified pressure vessels.
  • Inspected broilers and pressure vessels to ensure that they are fit for service in accordance to API codes.
  • Assist the Commissioned Inspectors with the development of repair procedures for piping, pressure vessels and boilers.
  • Witness in-process inspections of power boilers, pressure vessels, and piping per Code and sign off.
  • Performed various disciplines of NDT to Client specified Codes on piping, storage tanks and pressure vessels.
  • Performed inspections and audits of Boilers and Pressure vessels in accordance with current ASME Code and Addenda.
  • Inspected pressure vessels in fabrication stage, conducted visual inspection, WFMT and Liquid penetrate on vessels.
  • Inspected E&P production equipment such as API 12F tanks, pressure vessels and piping.
  • Performed internal visual, and NDE inspections of pressure vessels and storage tanks during planned shutdowns.
  • Performed external and internal visual inspections concerning pressure vessels and API above ground storage tanks.
  • Performed external inspections on piping and pressure vessels in accordance with the applicable API standards.
  • Conduct visual Inspection and NDE examinations on piping, pressure vessels and above storage tanks.
  • Performed various levels of inspection on welds, pressure vessels, boilers and electronic circuitry.

Show More

28. RT

average Demand
Here's how RT is used in Inspector jobs:
  • Inspected and verified purchase orders and outside processing certifications and product sampling per latest revision.
  • Followed checklist to verify that all important parts were examined to ensure customer satisfaction.
  • Monitored production operations for compliance with specifications and promptly reported defeats.
  • Prepare written reports of incidents and provide recommended future security suggestions.
  • Provide inspection reports to insurance companies and financial institutions.
  • Report inspection findings in computer system according to specifications.
  • Enter commercial and residential properties looking for termite infestations.
  • Possess knowledge in personal property tracking and acquisition policies.
  • Maintained excellent relationships with owners of rental properties.
  • Provide detailed reports of extinguisher locations and deficiencies.
  • Exhibited alertness and exceptional attention to detail.
  • Manufactured machine parts for securing commercial product.
  • Inspected packaging and condition of transportation containers.
  • Prepared reports covering materials scrapped or salvaged
  • Maintained inventory count inside rental properties.
  • Possess knowledge in property management principles.
  • Created computer generated error reports.
  • Inspected properties damaged by natural disasters
  • Establish prescribed maintenance schedules for the watering, cutting, fertilizing, etc in order to keep landscaping healthy and attractive.
  • Managed inspection of over 628 miles worth of Casing and Drill pipe for a total cost inspection worth at $132,633,600.00.

Show More

29. Hand Tools

average Demand
Here's how Hand Tools is used in Inspector jobs:
  • Maintained calibration records and calibrated hand tools.
  • Remove completed work pieces from equipment or work tables, using hand tools, and place work pieces in containers.
  • Disassembled defective parts and components, such as inaccurate or worn gauges and measuring instruments, using hand tools.
  • Performed in-house calibration of hand tools as well as working with outside vendors to schedule calibration of various machines.
  • Used a variety of hand tools, such as 85-jack hammer, circular saw, and chip gun.
  • Use hand or hand tools to perform routine cutting and trimming of meat, poultry, and seafood.
  • Grind, sand, clean, and polish objects or parts, using hand tools or equipment.
  • Use power and hand tools to cut, measure and fuse and pressure test service lines.
  • Remove damaged or defective parts or sections of structures and repair or replace using hand tools.
  • Utilized refrigerant gauges, vacuum pumps power tools and all hand tools of the HVAC trade.
  • Cleaned containers, materials, and work areas, using cleaning solutions and hand tools.
  • Diagnosed and repaired malfunctioning instruments and equipment, using manufacturer s manuals and hand tools.
  • Received training on instructions for voting, assembly of machine and equipment using hand tools.
  • Inspected and removed damaged parts, and repaired and replaced using machines and hand tools.
  • Load and adjust work pieces onto equipment or work tables, using hand tools.
  • Retained a high volume average of hand tools inspected, to achieve production requirements.
  • Worked with various hand tools to prep pipe and drilling equipment for daily inspection.
  • Removed surface defects, using hand tools, power tools and abrasive solutions.
  • Repair and maintain equipment, objects, or parts, using hand tools.
  • Inspect and document precision parts using various hand tools and visual micro view.

Show More

30. Customer Specifications

low Demand
Here's how Customer Specifications is used in Inspector jobs:
  • Work with other quality personnel in obtaining goals of meeting or exceeding customer specifications while meeting target costs and customer expectations.
  • Provided reports and pictures summarizing weekly activity monitored /witnessed of the manufacturing processes per the ITP and provided customer specifications.
  • Packed inspected products in cartons according to customer specifications and carried cartons to storage areas following all safety guidelines.
  • Inspected and tested all coils to ensure that customer specifications and criteria were being met accurately and precisely
  • Audit and monitor quality requirements in accordance with the company quality assurance policies and customer specifications.
  • Read and Interpret customer specifications accordingly from travelers; to meet customer requirements.
  • Inspected material and stitching that ensured quality and customer specifications were met.
  • Conducted visual inspection of all rails to ensure conformance within customer specifications.
  • Verified material testing reports to customer specifications upon receipt of raw materials.
  • Perform dimensional inspections on product to ensure compliance to customer specifications.
  • Inspect cups for conformity to customer specifications using measuring instruments.
  • Inspected first-run products to ensure compliance with customer specifications.
  • Assembled and packed air conditioning valves per customer specifications.
  • Inspected aluminum extrusion per print of customer specifications.
  • Observe fabrication operations for compliance with customer specifications.
  • Inspected ware per individual customer specifications.
  • Pack finished goods to customer specifications.
  • Inspected material to within customer specifications.
  • Inspect rugs according to customer specifications.
  • Ensured customer specifications were met.

Show More

31. Circuit Boards

low Demand
Here's how Circuit Boards is used in Inspector jobs:
  • Inspected ceramic and fiber circuit boards to ensure proper specifications according to company and customer standards.
  • Performed non destructive tests such as electrical test on individual circuit boards utilizing tests equipment
  • Assured quality assurance by inspecting various beads for computer circuit boards installation.
  • Operated computerized equipment to pinpoint defects on printed circuit boards.
  • Conducted testing of circuit boards to test specifications
  • Soldered, assembled SMT and through hole circuit boards, Inspected (QC) SMT and though hole under the microscope.
  • Worked on a calibrated machine to check for defects in circuit boards and also used printing software to build circuit boards.
  • Perform destructive and microscopic inspection on circuit boards, assist in-process inspection with visual, electrical, and dimensional inspections.
  • Perform inspection at all stages throughout the complete assembly process of printed circuit boards and cables, harnesses and S.M.T.
  • Inspected circuit boards, cleaned the circuits boards, sorted and filled up tickets for shipping the circuit boards.
  • Inspected inner layers of circuit boards before layers were pressed together for shorts, missing circuits and miscellaneous defects.
  • Job Duties: Inspection of circuit boards from first inspection to last, including testing and welding.
  • Complied and maintained with all inspection procedures for poor art work and misc problems on circuit boards.
  • Build and inspect high level electronics circuit boards and assemblies, according to process and procedures.
  • Inspect circuit boards for Television, Organize and keep track of the locations to be inspected.
  • Inspected electronic circuit boards for form, fit and function, in accordance to industry standards.
  • Inspected circuit boards with AOI and did visual inspection at 3x to 10x magnification.
  • Powder coat, clean, tape and solder miscellaneous computer and circuit boards.
  • Worked soldering and erecting circuit boards for Prince Corporation for the auto industry.
  • Corrected and removed improper areas of completed circuit boards when necessary and feasible.

Show More

32. Test Procedures

low Demand
Here's how Test Procedures is used in Inspector jobs:
  • Perform quality assurance test procedures using Hydro-testing machine and Rockwell hardness testers.
  • Performed final assembly inspection per acceptance test procedures before shipment.
  • Contributed to profitability by producing highly efficiently test procedures.
  • Worked according to government authorized documents, drawings, test procedures, engineering instructions, and problem reports, as required.
  • Interpreted and analyzed blueprints and sample data to determine, change, and measure specifications and test procedures.
  • Inspected paperwork that came with the units to be inspected for signatures and test procedures to be completed.
  • Recommended repair procedure or renewal and set out installation and test procedures to be followed.
  • Performed test procedures to ensure quality of product in order to meet customer specification.
  • Signed off automated test procedures and work order travelers for final completion of product.
  • Reviewed test procedures and all tests for commissioning of prison.
  • Record test procedures, quantities inspected and results.

Show More

33. FAA

low Demand
Here's how FAA is used in Inspector jobs:
  • Assisted FAA Designated Engineering Representative in obtaining approvals for all EMS installations.
  • Identified trends and frequency of trends to resolve issues; made presentations to company owner, senior management and FAA representative.
  • Worked with engineering and FAA on red label equipment to ensure parts and assemblies are segregated from production parts and assemblies.
  • Performed shipping inspection of commercial aircraft parts to verify chain of custody to last IAW FAA AC 00-56 and/or customer requirements.
  • Conducted first article inspections to ensure compliance with FAA and/or ODA approved procedures and ensured all associated records were properly completed.
  • Complete all tasks of a Quality Control Inspector for an Avionics Manufacturer in accordance with an FAA Approved Quality Manual.
  • Interact with Prod./ENGR./Customer Reps. & coordinate activities with FAA/GOVT Reps. /Foreign contractors for adherence to requirements of Acceptance criteria.
  • Inspected work done on aircraft and their components for accuracy, quality of workmanship and FAA compliance.
  • Scheduled aircraft for FAA AR (Airworthiness Representative) and DER (Designated Engineering Representative) testing.
  • Issue FAA Form 8130-3 Airworthiness Approvals for articles produced under FAA Part 21 production limitation record.
  • Involved in conformity inspections with new projects and issuance of FAA documents such as 8130-9.
  • Conducted burn tests and pull tests on all EMS installations in accordance with FAA regulations.
  • Follow FAA rules and insure AS's, service bulletins and FAR's meet expectations.
  • Ensured that FAA approved data is used for repairs and rework on aircraft and components.
  • Assumed the responsibilities of temporary Chief Inspector, FAA Coordinator and the Director of Quality.
  • Refurbished airplane engine parts, inspected airplane engine parts, made sure parts meet FAA approval
  • Inspect all seats and parts in accordance with FAA regulations and component maintenance manual instructions.
  • Maintained and supervised a safe working environment adhering to all Naval Aviation and FAA policies.
  • Ensured aircraft maintenance was performed in accordance with the FAA regulations and company policies.
  • Comply with all FAA regulations regarding inspection, quality testing, auditing and reporting.

Show More

34. Company Standards

low Demand
Here's how Company Standards is used in Inspector jobs:
  • Inspected parts for quality to adhere to company standards and to accurately evaluate severity of damaged and/or repaired parts.
  • Audit all product selectors regularly to ensure adherence to company standards.
  • Examined and measured items for functional operation, company standards.
  • Examined and measured items for dimensional accuracy and company standards.
  • Maintained high quality standards according to company standards and guidelines.
  • Ensured that material was received properly and met company standards/guidelines.
  • Processed incoming material and inspected to company standards.
  • Monitored and culled hosiery inventory in compliance with company standards and ensured the highest quality products were packaged and shipped.
  • Perform the inspection of new and returned digital equipment to ensure the condition of met company standards prior to dissemination.
  • Set up and maintain NDT equipment including sensitivity 2 and 3 dip tank system per ASTM and company standards.
  • Maintained records of defective hand tools, while managing the tools that could be reworked to meet company standards.
  • Write repair recommendations and oversee all repairs to equipment and piping in accordance with current codes and company standards.
  • Enforced insurance of compliance with all contract specifications and quality program requirements according to company standards and ISO standards.
  • Observed clipping and splicing operations and examines veneer sheets to ensure veneer is processed according to company standards.
  • Adhered to FDA and environmental regulations along with company standards to be a leader in the field.
  • Provide decision making and problem solving to correct inconsistencies and assist in updating company standards & specs.
  • Oversee a crew of 10-15 housekeepers making sure they were on task and cleaning to company standards.
  • Inspected each unit assigned to myself to ensure the Housekeeper thoroughly cleaned the unit to company standards.
  • Evaluated finished product, travel trailer units, to insure it met company standards and customer requests.
  • Tested electronic function of components prior to printed circuit board assembly for compliance to company standards.

Show More

35. QA

low Demand
Here's how QA is used in Inspector jobs:
  • Create QA Notification for non-conforming parts to request engineering for repair dispositions as required.
  • Schedule additional inspectors and materials testers based on construction schedule and QA/QC program requirements.
  • Performed QA/QC on project outcomes and prioritized additional projects using inspections.
  • Performed QA/QC owner representation of incoming materials for metallurgical requirements.
  • Facilitate customer materials/parts between QA and Production departments.
  • Maintain open communication with contractor and QA representatives.
  • Recorded and reported immediately to the ACO and QAR incidents of faulty and nonconforming work, delays, issues and problems.
  • Position: QAQC Inspector (on shore) Scope: Spools fabrication, associated tests and final AS-Built documentation in FD3.
  • Coordinate and inform FQA supervisor and/or production department regarding testing procedures and results and may recommend how to resolve problems.
  • Perform QA/QC oversight for all phases of fracture critical structural steel, welding, coatings and bolting of bridge fabrication.
  • Checked that all onshore/offshore-related QA/QC work is carried out in accordance with the approved PQP and Inspection & Test plan.
  • Prepared daily QA Reports of activities, weather conditions, progress of construction, reasons for delay, QC testing.
  • Worked on Add on Armor and AC project as a Quality Control/Quality Assurances Inspector (QAQC) in Kuwait.
  • Full system QAR, performed numerous safety of flight inspections and interpreted aircraft vibration analysis and rotor tracking systems.
  • Worked closely with QA to discuss defects and new trends I was tracking to report back to factory.
  • Documented all defects and reported to QA Did rework as needed Ran parts racks to the buffer zone.
  • Attended daily meetings with entire QA/QC staff, worked with junior staff members in a training position.
  • Monitor and report on the activities and quality of contractors in conjunction with their QA/QC representative.
  • Provide site audits, develop and review QA/QC manuals, turnover packages for specification compliance.
  • Inspect all work and comply with the required QA inspections during all maintenance actions performed.

Show More

36. QC

low Demand
Here's how QC is used in Inspector jobs:
  • Perform quality checks and ensure that all process specifications have been met and stamp paperwork or parts with QC stamp.
  • Performed more than 200 HPIR inspections, 1,000 Quality Control (QC) / Benchmark Inspections on Fannie Mae properties.
  • Accompany QC and BOP (Balance of Plant)personnel, gaining extensive inspection experience in multiple inspection methods.
  • Inspected (QC) all in-coming, in-process, and out-going products with the use of tolerance checking equipment.
  • Performed quality inspection of clothes and assured to that QC staff is well trained to conduct inspection.
  • Provided QC inspections for the placement and sampling of the cast in place concrete for projects.
  • Complete documentation, red lines, sequential, bore logs, billing, QC and training.
  • Coordinate shared labor resources of QC inspectors between assembly, range, and packing areas.
  • Write Non-Conforming Materials Reports when required Inputting QC data into Excel spreadsheets for data collection
  • Provided required 3rd party QC for municipal, DOT, military and space projects.
  • Draft and compiled daily QC Reports, next day look-ahead, schedule progress overview.
  • Provided QC documents for all test methods, protocols, reports and SOP's.
  • Record and maintain all sample logs, paper works filing and QC records.
  • Make recommendations for improvements to standard CQC provisions as applied to the filed.
  • Supported QC to improve and correct quality concerns for mass production parts.
  • Measured vendor parts using QC measuring tools and generated FIA reports.
  • Inspect bogies for conformance with QC guidelines and sign-off on paperwork.
  • Adhered to MPS, QCCP, work orders and written/verbal instructions.
  • Ensured compliance with specifications and blueprints for QC in assembly.
  • Reported each defective part in writing to the QC department.

Show More

37. Production Problems

low Demand
Here's how Production Problems is used in Inspector jobs:
  • Notified supervisors or other personnel of production problems and recommended necessary corrective action based on inspection results.
  • Coordinated activities to evaluate and resolve engineering-related production problems encountered in assigned area of aircraft manufacturing facility.
  • Notified supervisor of production problems or to obtain additional resources.
  • Notified supervisors or other personnel of production problems.
  • Notified personnel of production problems.
  • Notified supervisors of production problems.
  • Notified supervisors and other personnel of production problems, and assist in identifying and correcting these problems.
  • Identified and helped resolve production problems such as issues in the CEA room.
  • Identified and helped resolve production problems such as casting flaws or small indications.
  • Identified and helped resolve production problems such as inspection on car bolts.
  • Identified and helped resolve production problems such as over or underweight rounds.
  • Identified and helped resolve production problems such as texture and discoloration.
  • Acted as team leader for fellow inspectors to resolve production problems.
  • Provide quick fix solution in common production problems.
  • Identified and helped resolve production problems.
  • Identified and helped resolve production problems such as determining previous substandard repairs.
  • Identified and helped resolve production problems such as mismatch diecast or improper trim process.
  • Inspected flatbed aluminum trailers for welds Ordered to the specifications of the customer Notified supervisors or other personnel of production problems.

Show More

38. Raw Materials

low Demand
Here's how Raw Materials is used in Inspector jobs:
  • Review of certifications for raw materials and outside processing as required by blueprints and specifications.
  • Verify certification of raw materials and purchased components.
  • Collect and inspect incoming raw materials, in line product and finished product sample for micro and chemical testing.
  • Maintain and apply safety and emergency procedures, quality forms and manuals, raw materials per various specs.
  • Performed packaging line and manufacturing inspections as well as sampling and testing of incoming components and raw materials.
  • Performed wide variety of inspection and quality control operations parts, raw materials, and detailed reports.
  • Inspect, sort, or weigh agricultural raw materials for defects and deviations from specifications.
  • Move and position raw materials and finished components with use of material moving equipment.
  • Monitor raw materials to ensure they are not defective or harmful to the consumer.
  • Applied approval or rejection labels to bulk raw materials once data was evaluated.
  • Conferred with management over the presence of substandard workmanship or raw materials.
  • Inspect all incoming raw materials using the raw material standard sampling table.
  • Inspect raw materials and verify material that is being used in production.
  • Hold or release raw materials depending on the result of inspection.
  • Withhold all raw materials, which do not meet specification.
  • Approved the quality of raw materials before manufacturing began.
  • Maintained logs of raw materials and finished products.
  • Unloaded raw materials and spread for cutting.
  • Inspected finished products and raw materials.
  • Approve the quality of raw materials

Show More

39. Meeting Specifications

low Demand
Here's how Meeting Specifications is used in Inspector jobs:
  • Disregarded or rejected products or materials not meeting specifications.
  • Discarded and rejected pouches not meeting specifications.
  • Rejected or re-grade products not meeting specifications.
  • Examine cloth for knitting defects and reject cloth not meeting specifications.
  • Rejected products, materials, and equipment not meeting specifications.
  • Inspected Clothes for knitting defects and reject clothes not meeting specifications UPS Log Receiving weekly shipments

Show More

40. Stainless Steel

low Demand
Here's how Stainless Steel is used in Inspector jobs:
  • Line operator* Worked with industrial materials like fiber glass, steel, stainless steel and aluminum.
  • Work with metal parts of stainless steel and titanium Process work orders as assigned.
  • Inspected solid high temp and stainless steel rounds for internal and surface defects.
  • Inspected titanium and stainless steel parts of various shapes and sizes.
  • Work with different metal and alloys for example 2205 Stainless steel.
  • company drilling and excavating old gas pipe and inserting new stainless steel pipe and filled out IDOT daily inspection forms.
  • Inspected carbon and stainless steel piping systems in process facilities and cross-country pipelines for corrosion and erosion Alerted clients to potential issues

Show More

41. Fema

low Demand
Here's how Fema is used in Inspector jobs:
  • Monitor Semi-truck delivery and installation of FEMA trailers and verify Federal compliance.
  • Provided all necessary written and verbal communications for FEMA Determination of benefits.
  • Conducted over 57 home inspections in disaster areas affected by hurricane Sandy on behalf of FEMA in less than 3 weeks.
  • Explain Federal Emergency Management Agency (FEMA) provided documents, and answer basic questions from applicants about the FEMA process.
  • Determine levels of damages per FEMA guidelines and report damages for Vanguard and FEMA approval for disbursement of government funds.
  • Suggested and implemented a less time consuming process to assist clients waiting to get FEMA trailers place on their property.
  • Prepared Preliminary Damage Assessment (PDA) and Damage Survey Reports (DSR's) for disaster declaration FEMA-1068-DR-PR.
  • Worked assisting FEMA with the clean-up from the devastating hurricanes that plagued the City of Jacksonville and surrounding areas.
  • Performed FEMA property inspections for homes that have catastrophic damage for Hurricane Ike & Hurricane Gustav.
  • Estimated female tassels remaining and males shedding based on smaller sample sizes taken throughout each field.
  • Work within the guidelines of FEMA regulation to proficiently inspect homes and areas after a disaster.
  • Completed housing unit's requests for the FEMA travel trailer program alone the Mississippi gulf coast.
  • Schedule and perform inspections with FEMA disaster survivors according to FEMA Specifications and FEMA inspection guidelines.
  • Coordinated in-person, storm-related damage assessments with 86 homeowners & renters & reported to FEMA.
  • Logged data using FEMA proprietary software on notebook computer and uploaded to servers on site.
  • Coordinate visits and interview for reassurance of owners and renters' qualification for FEMA refunds.
  • Submitted report to FEMA to determine the type of assistance the applicants are eligible for.
  • Contract inspector for FEMA deployed to Texas and Florida after hurricanes Harvey and Irma.
  • Record damages in a pen base hand held computer loaded with FEMA software.
  • Inspected homes through the natural disaster relief for FEMA in the NY areas.

Show More

42. New Construction

low Demand
Here's how New Construction is used in Inspector jobs:
  • Perform detailed inspections of new construction to assure conformance with contract drawings and specifications on 20 million dollar interior/exterior building modernization.
  • Inspected remodeling and new construction of single-family homes.
  • Inspected work performed by contractors during new construction, from compaction to coating on above ground oil storage tanks.
  • Authorized Inspector commissioned by The National Board of Boiler and Pressure Vessel Inspectors for New Construction and In-service inspections.
  • Experience in the review process of permit applications for additions, remodels, enclosures, and new construction.
  • Inspect and support new construction, emergency repair and restoration on both oil and natural gas pipeline systems.
  • Worked with inspectors over the new construction line to make sure we all were on the same work scope
  • Certified FEMA MHU (Manufactured Housing Unit) in-plant building inspector for new construction during the manufacturing process.
  • Project involves the demolition and new construction of the service plaza on Florida's Turnpike.
  • Conduct commercial and residential inspections, new construction, additions, tenant improvements, etc.
  • Project also consisted of new construction for underpass to construct new roadway for 18th Street.
  • Worked in Lima Ohio as an API 570/UT on new construction piping and equipment.
  • Reviewed Inspections with local DOT and municipalities to ensure full compliance of new construction.
  • Perform and evaluate Non Destructive Testing (NDT) of repairs and new construction.
  • Inspected New Construction and Rehab Projects: Sanitary and Storm Sewers Pump Stations.
  • Assisted management on new construction of bridges, roads, and resurfacing projects.
  • Evaluated new construction properties, as well as retail and chain restaurant buildings.
  • Insure quality, integrity and safety of instillation and testing of new construction.
  • Sell termite bonds to residential, new construction, apartment buildings and hotels.
  • Completed new construction inspections and worked with contractors and managers on completion dates.

Show More

43. Drill Pipe

low Demand
Here's how Drill Pipe is used in Inspector jobs:
  • Drill pipe, Casing and Tubing Inspection: Thoroughly clean and examine the tubular body as well as the connections.
  • Inspected, cleaned, and tallied drill pipe, casing, and tubing for the oil and gas industry.
  • Witnessed Pin & Box connection fit up to pipe, Verified Friction Weld of connections to Drill Pipe.
  • Marked drill pipe tube and stock steel with Grade, Accept/Reject score & status for proper compliance.
  • Inspect shallow and deep water drill pipe to ensure there are absolutely no defects or cracks.
  • Inspected drilling tools such as BHA directional tools, drill pipe, casing and drill collars.
  • Cleaned, inspected, and ran an EMI (electromagnetic inspection) of drill pipe.
  • Clean, inspect, and run a EMI (electromagnetic inspection) of drill pipe.
  • Clean and inspect various drill pipe tools and equipment with solvents and power tools.
  • Utilized SOP to carry out Non-Destructive Testing on drill pipe, welds and threads.
  • Inspect drill pipe, casing, steel tubing and tubular oil well equipment.
  • Witnessed/Verified Straightness of connections to drill pipe and stress relief conducted by operators.
  • Clean and inspect various types of drill pipe tools and other equipment.
  • Identify and inspect handling tools, drill pipe and equipment and BHA.
  • Supervised the inspections and electromagnetic inspections on drill pipe and collars.
  • Provide inspection for 2nd party buyers for drill pipe and casing.
  • Inspect drill pipe and casing in yard and on locations.
  • Supervised and coordinated helpers- Prepped drill pipe to be inspected.
  • Take pipe to inspection area, separate drill pipe.
  • Checked and certified drill pipe on oil rig location

Show More

44. Final Product

low Demand
Here's how Final Product is used in Inspector jobs:
  • Performed arrival condition, in-process and final product inspections as well as witnessed testing operations.
  • Provided certification and performance documentation for final product approval and shipping.
  • Performed final inspection of final product before shipment to customer to ensure that all parts met customer specification and quality criteria.
  • Inspected the final product through a list of test like leak, program, and also package the product for shipping.
  • Inspected final product (blue jeans) for defect and quality Mended and trimmed excess materials Achieved daily quota progression as required
  • Inspect product of materials, work in process, and final product according to documentation and quality control criteria.
  • Reviewed the cabinets doors throughout the production process to ensure that the final product quality met company's standards.
  • Inspected parts using various types of equipment to check for calibrations, specifications, of final product.
  • Inspect parts in process and final product to ensure parts met blue print and customers' specifications.
  • Perform inspections and audits on assembly units and perform quality process checks from beginning to final product.
  • Conducted an ongoing inspection of work-in-process to ensure that the final product met drawings and specifications.
  • Perform counting and sorting various items and forming or breaking down boxes for final products.
  • Read blue print and inspect final products to make sure clients' specifications are met.
  • Log and inspect final product and lot number for tracking before shipping to client.
  • Packaged final product, scanned them, and put them away.
  • Inspected final product after it came out of a clean room.
  • Assure conformance of material, assemblies and final product to specifications.
  • Perform labeling, packaging, and visual inspection operations of final product
  • Inspect threads, couplings, and final product to be shipped.
  • Checked final product after dyed and sized for flaws.

Show More

45. Computer System

low Demand
Here's how Computer System is used in Inspector jobs:
  • Inspected residential and commercial dwellings for complacent septic systems-Documented environmental compliance in reports-Entered and managed data in computer systems and databases
  • Utilize slot machines computer system, including operating financial and surveillance modules to monitor overall casino operations.
  • Supervised and trained military/civilian members on egress systems as well as shop training/tool accountability/computer systems.
  • Completed daily data entry into the facility computer system and scheduled cleaning assignments as needed.
  • Inputted incoming and outgoing road trucks information into internal tracking computer system.
  • Scheduled inspections and updated computer systems with results of inspections performed.
  • Entered data into computer system to generate labels and adjust inventory.
  • Documented inspection results by inputting data into AS400 computer system.
  • Updated customer and computer systems with all required information.
  • Processed paperwork and entered data into company computer system.
  • Enter repair recommendations into the company computer system.
  • Operate computer systems to control working machinery.
  • Entered billing information into computer system.
  • Performed piping wall thickness inspections with a gamma ray camera and downloaded film and interpreted test results on a computer system.
  • Inspect welds on submarines for General Dynamics Electric Boat as a Contractor, and using computer system to place data.
  • Inspected, rolled, and flagged all defects of mattress ticking while entering the information into the AS400 computer system.
  • Tested customer vehicles to keep in compliance with state laws, use of computer systems to connect vehicles wire boards.
  • Create move documents in computer system and move boxes to designated location(s) using a pallet jack.
  • Evaluate repair of computer systems throughout the surrounding area and at remote missile launch facilities assigned to the base.
  • Operated equipment and computer systems in the final finish, inspection, classifying and G-3 radial light truck area.

Show More

46. Insurance Companies

low Demand
Here's how Insurance Companies is used in Inspector jobs:
  • Created comprehensive confidential consumer inspection reports on potential policyholders for large life and disability insurance companies.
  • Provide in-depth commercial property and liability insurance inspections on risks for requesting insurance companies.
  • Performed internal and external residential loss control surveys for homeowner's insurance companies.
  • Provided Insurance companies with underwriting information *Interviewed insured clients on potential and existing policies
  • Performed Hazard and Liability Inspections for residential and commercial insurance companies countrywide.
  • Conduct inspections for Insurance Companies for the determination of insurance eligibility
  • Performed residential and commercial building inspections for various insurance companies.
  • Photograph dwellings and automobiles for insurance companies and collection agencies
  • Counseled homeowners and prepared contracts for the insurance companies
  • Contract Inspector for litigation against insurance companies.
  • Prepare final report by uploading photos and completing complex and unique forms to be submitted to the individual insurance companies.
  • Assist customers with different kinds of inspections of their personal belonging that is not covered by traditional insurance companies.
  • Field work duties: subcontracted by mortgage and/or insurance companies to take photos of specific homes in various areas.
  • Field representative inspecting and surveying homes and businesses, interior and exterior, for insurance companies and Banks.
  • Use computer, cameras, measuring and testing devices to provide tailored reports to individual insurance companies.
  • Subcontract work as needed, doing audits and inspections for banks, insurance companies and individuals.
  • Interviewed homeowners, residents, tenants, neighbors and agents, on behalf of insurance companies.
  • Worked with individual mortgage companies, and insurance companies doing commercial and residential inspections.
  • Inspect property exterior for various insurance companies, upload photos, enter data.
  • Conduct insurance survey's to provide accurate information reported back to insurance companies.

Show More

47. Measure Materials

low Demand
Here's how Measure Materials is used in Inspector jobs:
  • Inspect, test, or measure materials, products, installations, work towards modifying to fit specifications.
  • Inspect, test, or measure materials, products, installations, and work for conformance to specifications.
  • Measure materials or distances, using square, measuring tape, or rule to lay out work.
  • Inspect, test, or measure materials, products, installations, or work for packaging.
  • Inspect, test, or measure materials, products and installations.
  • Inspect, test, or measure materials or products being produced.
  • General labor, inspect, test, or measure materials
  • Inspect, test, and measure materials being produced.
  • Inspect, test, or measure materials or productsbeing produced using rulers, calipers, gauges, or micrometers.
  • Recommend adjustments to the assembly or production processInspect, test, or measure materials or products being produced.

Show More

48. Reject Products

low Demand
Here's how Reject Products is used in Inspector jobs:
  • Discard or reject products, materials, or equipment not meeting specifications.
  • Discard or reject products, material that do not meet the standards.
  • Reject products that do not meet specifications.
  • Discard or reject products, materials, or equipment not meetingspecifications.
  • Discard or reject products, materials, or equipment not meeting specifications.
  • Discard and reject products, materials and equipment that do not meet specifications.

Show More

49. BMW

low Demand
Here's how BMW is used in Inspector jobs:
  • Performed quality inspections of completed vehicles at BMW Manufacturing Co.
  • Assigned to inspect weld for the customer (BMW)-Scan and print labels -Place scanned labeled parts containers to be shipped
  • Inspected Mercedes and BMW frames, identified weak welds, documented, filed and maintained proper inspection records and quality assurance documents
  • Assembled BMW X6 door panel, use of hand tools, operated camera station, and inspected door before shipping.
  • Inspect various materials, parts, components, and finished products for BMW bumpers and small parts.
  • Audit dealerships for compliance of corporate policies (Ford, General Motors, Honda, BMW).
  • Inspected different parts for quality issues at BMW and sometimes reworked defective parts.
  • Perform daily inspections on BMW car bumpers and doors for quality and accuracy.
  • Performed inline inspections of parts and assisted with training other employees at BMW.
  • Inspected BMW/Mercedes Parts for defects in a fast paced environment.
  • Inspected and rework car parts, Production line at BMW.
  • Inspected and packed BMW vehicle parts from production conveyor.
  • Inspect and stock various BMW side view mirror components.
  • Performed detailed inspections of BMW motor vehicle parts.
  • Inspected Mercedes and BMW Roof Rails for defects.
  • Performed inspection of BMW fender and bumper parts.
  • Inspect auto parts used to build BMW automobiles
  • Inspected front and rear seats for Lear/BMW
  • Inspect top shoulder welds on BMW parts
  • Inspect BMW series E-70 and E-71 car doors for quality and defects.

Show More

50. Shore Tanks

low Demand
Here's how Shore Tanks is used in Inspector jobs:
  • Administered suitability inspections of shore tanks before use
  • Survey and sample representative product from bulk storage tanks, tankers, ships, barges, shore tanks and rail cars.
  • Gauged and sampled petroleum from vessels, barges, and shore tanks utilizing methods dictated by the company and API procedures.
  • Subject to 24 hour call out to inspect barges, ships, shore tanks, for product quality.
  • Inspect and gather samples of oil and gas products from barges to ships to shore tanks in Exxon refinery
  • Job duties included sampling and measurements of shore tanks, barges, and ships.
  • Take samples of different types of chemicals from shore tanks, vessels and ships.
  • Gauge shore tanks, sample vessel tanks for testing and retain (All products)
  • Pull samples, gauge measurements and calculate volumes of shore tanks and barges.
  • Experience with confined spaces including inland shore tanks and various vessel tanks.
  • Gauge shore tanks for water, temperature and fuel levels.
  • Sampled, gauged, and temped shore tanks.
  • Gauge and pull samples on ships, barges, and shore tanks.
  • Gauge & Sample Shore Tanks, Barges & Ships.
  • Can perform pre Inspection and conduct of wall wash of ship cargo tanks and shore tanks for fitness to load cargoes.
  • Calculated and reported quantities of petroleum and chemicals transported and transferred from shore tanks to vessels and vice versa.
  • Gauge and Sample oil on barges, shore tanks, and ships Reports for the different jobs
  • Measure and retrieve samples from barges,ships and shore tanks from various refineries.
  • Gauge and sample ships, barges, shore tanks for various refineries.
  • Quantify barrel amounts - Climb shore tanks carrying sample equipment & sample bottles - Work on docks

Show More

20 Most Common Skill for an Inspector

Magnetic Particle28.4%
Safety Procedures23.4%
Final Inspection7%
Inspection Process5.3%
Customer Service4.1%
API2.7%
Car Parts2.7%
Quality Standards2.7%

Typical Skill-Sets Required For An Inspector

RankSkillPercentage of ResumesPercentage
1
1
Magnetic Particle
Magnetic Particle
22.4%
22.4%
2
2
Safety Procedures
Safety Procedures
18.4%
18.4%
3
3
Final Inspection
Final Inspection
5.5%
5.5%
4
4
Inspection Process
Inspection Process
4.2%
4.2%
5
5
Customer Service
Customer Service
3.2%
3.2%
6
6
API
API
2.2%
2.2%
7
7
Car Parts
Car Parts
2.1%
2.1%
8
8
Quality Standards
Quality Standards
2.1%
2.1%
9
9
Inspect Parts
Inspect Parts
2%
2%
10
10
Assembly Line
Assembly Line
1.8%
1.8%
11
11
NDT
NDT
1.8%
1.8%
12
12
PT
PT
1.8%
1.8%
13
13
Data Entry
Data Entry
1.7%
1.7%
14
14
Liquid Penetrant
Liquid Penetrant
1.6%
1.6%
15
15
Inspection Reports
Inspection Reports
1.6%
1.6%
16
16
CMM
CMM
1.3%
1.3%
17
17
NDE
NDE
1.3%
1.3%
18
18
Ensure Compliance
Ensure Compliance
1.3%
1.3%
19
19
Test Cases
Test Cases
1.2%
1.2%
20
20
Level II
Level II
1.2%
1.2%
21
21
Corrective Action
Corrective Action
1.2%
1.2%
22
22
Sort
Sort
1.1%
1.1%
23
23
Automotive Parts
Automotive Parts
1.1%
1.1%
24
24
Osha
Osha
1.1%
1.1%
25
25
ISO
ISO
1.1%
1.1%
26
26
Inspection Results
Inspection Results
1%
1%
27
27
Pressure Vessels
Pressure Vessels
0.9%
0.9%
28
28
RT
RT
0.9%
0.9%
29
29
Hand Tools
Hand Tools
0.8%
0.8%
30
30
Customer Specifications
Customer Specifications
0.7%
0.7%
31
31
Circuit Boards
Circuit Boards
0.7%
0.7%
32
32
Test Procedures
Test Procedures
0.7%
0.7%
33
33
FAA
FAA
0.7%
0.7%
34
34
Company Standards
Company Standards
0.6%
0.6%
35
35
QA
QA
0.6%
0.6%
36
36
QC
QC
0.6%
0.6%
37
37
Production Problems
Production Problems
0.6%
0.6%
38
38
Raw Materials
Raw Materials
0.6%
0.6%
39
39
Meeting Specifications
Meeting Specifications
0.6%
0.6%
40
40
Stainless Steel
Stainless Steel
0.6%
0.6%
41
41
Fema
Fema
0.6%
0.6%
42
42
New Construction
New Construction
0.5%
0.5%
43
43
Drill Pipe
Drill Pipe
0.5%
0.5%
44
44
Final Product
Final Product
0.5%
0.5%
45
45
Computer System
Computer System
0.5%
0.5%
46
46
Insurance Companies
Insurance Companies
0.5%
0.5%
47
47
Measure Materials
Measure Materials
0.5%
0.5%
48
48
Reject Products
Reject Products
0.5%
0.5%
49
49
BMW
BMW
0.5%
0.5%
50
50
Shore Tanks
Shore Tanks
0.5%
0.5%

5,506 Inspector Jobs

Where do you want to work?