Inspector jobs in Knoxville, TN

Job Title: Construction Materials Testing (CMT) Inspector ***Work Location: Atlanta, GA *** Salary: Based on experience and will be discussed with manager in interview. Duties/Responsibilities : Conduct diverse materials testing and some construction inspections. The materials testing is done mainly in the field, with potential for lab work as needed. Responsible for supporting the company's CEI services for ensuring quality assurance for clients and projects. Some duties include performing moisture and compaction tests using Nuclear Densimeter or sand cone device. Responsibilities include obtaining representative field samples and performing a variety of tests on concrete materials to determine temperature, unit, weight, slump, yield, and air entrainment. Prepare and submit daily field reports. The role entails working in proximity to heavy construction equipment, requiring standing and climbing in and out of deep trenches, exposure to hazardous materials, chemicals, and dust, along with working in adverse weather conditions. You will be required to use appropriate safety equipment and procedures in performing assignments. You will report to the Engineer/Project Manager who reviews work through conferences, observations of work, and overall results achieved. Communicates with the public, other employees, vendors, management, and contractors to relay/review job progress, results of lab/field tests, and scheduling of work. Prepares test results documentation to relay job progress and describe unusual job site conditions. Meets scheduling and attendance requirements. Understands and interprets schematic drawings to locate and record where sampling/testing was obtained. Education/Experience: High School Diploma/GED Knowledge of the properties, characteristics, strengths, and weaknesses of the materials used in construction. 5+years of experience in building construction, construction inspection, paraprofessional engineering work, or work involving construction materials testing. ACI Concrete Field-Testing Technician I, GDOT FCON Certification preferred, Portable Nuclear Gauge user certification. Must have a valid driver's license and be insurable. Physical Requirements: Physically mobile in and around construction sites and field assignments Ability to carry required instruments and equipment. Ability to lift 50 pounds. Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. The worker is subject to variable climate and environmental conditions including but not limited to extreme cold and heat. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

RK&K is seeking talented Senior Roadway and Bridge Inspectors to work in the Knoxville/Tri-Cities area, with a focus in providing construction engineering inspection services on transportation projects for clients within the area. The Senior Inspectors should have 10+ years of experience working on DOT and/or other local agency construction programs and experience inspecting/managing CEI projects and supervising teams of Inspectors. Essential Function The ideal candidate for this position will work independently with multiple transportation clients and contractors while being responsible for: Work on various roadway and bridge projects within the region's geographic area Oversight of contractor's quality control operations Quality Assurance sampling and testing Completion of Daily Sampling and Testing Reports Data input in SiteManager/LIMS Daily communication with client, contractor, and field project personnel Required Skills and Experience High School diploma or equivalent 10+ years of prior experience providing Construction Engineering Inspection services Candidates must be trustworthy and responsible Must have a solid background in mathematics Understand how to read and follow test specifications Excellent driving record Experience supervising teams of Inspectors and/or Site Management experience Preferred Skills and Experience TDOT Asphalt Plant Technician TDOT Concrete Field Technician/ACI Grade 1 TDOT HMA Certified Roadway Inspector Aggregate Technician TDOT Concrete Plant Technician Nuclear Gauge Field Technician Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Anderson, Knox, Campbell, Union, Claiborne, Grainger, Hamblen, Jefferson, Sevier, Blount Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

NOFS (Northern Ohio Field Services) is currently seeking an experienced Mortgage Inspector to join our growing team in Blount County TN. As a Mortgage Inspector at NOFS, you will be responsible for conducting inspections on residential properties to ensure occupancy status. This is a Contractor Other position and the successful candidate will work independently, without supervision, to complete assigned tasks accurately and efficiently. Apply at ************************ Compensation & Benefits: We offer a fee for each inspection. This fee varies by location and volume. You can expect to earn between $25 and $35 per hour. As a contractor, you will also have the opportunity to set your own schedule and work autonomously. Responsibilities: - Conduct residential property inspections to ensure occupancy status, deliver delinquency letters, conduct insurance inspections - Utilize inspection software and tools to document and report findings - Take photos of properties and deliver documents as needed - Complete inspections within designated timelines and meet performance metrics - Communicate with account manager in a professional manner - Keep up to date with industry regulations and guidelines - Maintain accurate records and documentation of inspections - Maintain professionalism at all times. Requirements: - Drivers License, insurance and reliable transportation. Must pass background check to obtain Aspen Grove number, not reimbursed. - Prefer 6 months in the inspections field, or working as a 1099 employee - Strong attention to detail and excellent time management skills - Proficient with technology and able to learn new software and tools quickly - Excellent communication and customer service skills - Ability to work independently and meet deadlines - Ability to travel to various properties in Blount County and potentially other surrounding counties. Apply at ************************ EEOC Statement: At NOFS, we are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionFMM is seeking a motivated professional to fill our Lighting Inspector contract position. FMM is a maintenance and construction company located in Denham Springs, LA servicing both residential and commercial clients nationwide. At FMM, we are committed to providing superior levels of service to our clients while maintaining our core values of Quality, Teamwork, Integrity, Safety, and Versatility. Job Summary The Lighting Inspector will perform quarterly lighting inspections at night for our commercial bank clients. Lighting inspections will be performed in the evening and overnight hours while lighting requirements can be fully measured. Inspections are performed at each location once a quarter and pay is contingent upon the completion per location. Essential Job Duties and Responsibilities: ( Included but not limited to) Take inspection photos of facilities operated by bank clients of FMM. Document the overall site lighting, particularly whether lights are operating or not, and with special emphasis on the lighting in and around the ATM and Night Drop equipment. Upload photos and a site diagram showing any outages. Light meter reading will need to be taken, recorded, and sent to FMM for review twice a year. Required Skills and Abilities: 1-2 years of experience Willing and able to learn new computer programs Ability to pass a drug screen Ability to travel regionally to various client sites as needed Locations: This position will be in charge of the Southeast and Northeast Tennessee Region including the following cities: Chattanooga, Cleveland, Maryville, Soddy Daisy, Sevierville, Lookout Mountain, Gatlinburg, Signal Mountain, Pigeon Forge, Collegedale, Knoxville, Bristol, Greeneville, Rogersville, Rockwood, Kingsport, Jonesborough, Newport, Elizabethton, Dandridge, Johnson City, Morristown, Blountville, Mosheim, Farragut, and Ringgold, GA Appx number of locations: 73 sites Pay per location: $30 At FMM, we provide our clients with high quality, high value maintenance and constructions services while maintaining superior levels of communication, professionalism, integrity, and honestly with our staff, clients, suppliers, and professional associates. Our core values of Quality, Teamwork, Integrity, Safety, and Versatility are our driving force. If you are an individual who possesses these values, we look forward to hearing from you.

Longenecker & Associates (L&A) seeks a motivated Quality Control Inspector to contribute to our mission supporting our work at UCOR in Oak Ridge, TN. L&A is a woman-owned small business and trusted partner enabling critical missions across the U.S. Department of Energy (DOE) complex for more than 30 years. We contribute to DOE's nuclear security and environmental remediation enterprise by providing the highest-caliber staff and experts. L&A is unconditionally committed to mission success and the well-being of employees, the nation and the environment. Our team members are passionate about building a healthier environment for generations to come. We are a community that interfaces and effectively communicates with all levels of management and government. If you have a passion for excellence, seek opportunities to engage in mission critical work, and consistently exceed expectations, apply now to join our professional family. POSITION DESCRIPTION Quality Control Inspectors are certified in receipt inspection, and other disciplines as needed, to verify that structures, systems, and components conform to predetermined requirements (e.g., codes, standards, specifications, regulatory, and contractual requirements). Non-conforming conditions, including suspect/counterfeit items, identified during the inspection and testing process shall be identified, documented, and dispositioned in accordance with established processes/procedures. PRINCIPAL RESPONSIBILITIES Possesses and applies a comprehensive body of knowledge to the timely and high-quality completion of assigned tasks. Perform receipt inspections at Central Receiving Facility or at Project location by examining inbound equipment and material for required characteristics (e.g., dimensional inspection, materials of construction) specified in the inspection plans and procurement documents. Document receipt inspections using the UCOR Electronic Purchasing System (EPS) and/or on Special Receiving Inspection Reports. Report programmatic deficiencies as Conditions Adverse to Quality (CAQ), as appropriate. Travel to vendor/supplier locations to perform source release inspections prior to shipment to UCOR sites. Be familiar with the scope and limitations of each discipline for which the individual is certified. Interpret and evaluate results with respect to applicable codes, standards, drawings, and specifications. EDUCATION REQUIREMENTS At a minimum, the following combination of education and experience is required. A high school or GED diploma with three (3) years related experience in equivalent inspection or testing activities; or An associate's degree in a related discipline plus one (1) year of related experience in equivalent inspection or testing activities; or A bachelor's degree plus six (6) months of related experience in equivalent inspection or testing activities. MINIMUM QUALIFICATIONS Effective written, listening, and oral communication skills. Be able to use inspection planning tools, determine sample size for lots, and pull random samples. Knowledge to interpret design documents (e.g., specifications). Be able to select the appropriate measuring tools and techniques. Understand types of measurement, measurement terminology, and the different types of measurement scales. Be able to identify and report non-conforming conditions. Have basic calibration knowledge to recognize in-or-out of calibration conditions. Knowledge of the quality control principles. Knowledge of regulatory and contractual requirements that impact the QA program. Ability to obtain a DOE Q-Clearance, as needed. Ability to work in a diverse work environment. Satisfactory results of a pre-employment screening, which includes a background check and drug screening in accordance with Federal requirements (details below), Ability to fulfill and promote L&A core values. DESIRED QUALIFICATIONS 5 years prior experience related to receipt inspection or certification as a Level II or III Quality Control Inspector is preferred. LOCATION This full-time on-site position is located at the UCOR office in Oak Ridge, TN. UCOR is conducting major cleanup activities at the Oak Ridge National Laboratory (ORNL) and the Y-12 National Security Complex as well as remedial activities at the East Tennessee Technology Park (ETTP). Cleanup missions on the Oak Ridge Reservation (ORR) focus on protecting people and the environment from industrial and chemical hazards while enabling current and future science and national security programs. UCOR also leads critical projects (e.g., Outfall 200 Mercury Treatment Facility and the Environmental Management Disposal Facility) and manages nuclear operations facilities at the ORNL and Transuranic Waste Processing Center. As a DOE Voluntary Protection Star site-the highest safety designation for a DOE site-safety is a prerequisite for the performance of all work performed. PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. PRE-EMPLOYMENT SCREENING Please note that marijuana remains a Schedule I controlled substance under Federal Law. Federal contractors must follow Federal drug-free workplace rules, which prohibit marijuana use, even if medical or recreational use is permitted under State Law. SALARY AND BENEFITS As an L&A employee, you will be eligible for a competitive salary as well as a comprehensive benefits package including healthcare (medical and dental), 401K plan, and paid time off. We believe in investing in our employees beyond compensation and as an L&A employee, you will have access to in-house training, career pathing, mentoring, award programs, tuition reimbursement and much more. L&A is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin, age, or status as a qualified individual with a disability or protected veteran.

Job Title: Quality Inspector Status: Non-exempt, Hourly Reports to: Quality Manager Hours: 3 open positions (one per shift) 1st shift - 7:30am - 4:00pm 2nd shift - 3:30pm - 12:00am 3rd shift - 11:30pm - 8:00am We are seeking a detail-oriented Quality Inspector to join our manufacturing team. The successful candidate will be responsible for inspecting parts at various stages of the production process to ensure compliance with quality and safety standards. This role is essential to maintaining integrity and ensuring customer satisfaction. Key Responsibilities: Inspect in-process components and finished products for compliance with specifications. Perform visual and mechanical inspections using tools such as calipers, micrometers, gauges, height gauges, and comparators. Accurately document inspection results and maintain quality records. Reject and quarantine non-conforming materials or products and initiate appropriate corrective actions. Read and interpret engineering drawings, blueprints, and technical documents. Conduct first article, in-process, and final inspections. Collaborate with production and engineering teams to resolve quality issues and improve processes. Ensure inspection and testing equipment is properly calibrated and maintained. Participate in internal audits and support external audits when required. Uphold all company quality, safety, and cleanliness standards. Requirements: High school diploma or equivalent; technical certification or vocational training in manufacturing or quality preferred. Minimum of 2 years' experience in a quality inspection role within a manufacturing environment. Proficiency with inspection tools and measuring equipment. Familiarity with quality standards such as ISO 9001. Ability to understand and interpret technical drawings and specifications. Strong attention to detail and excellent organizational skills. Basic computer skills: experience with quality software or ERP systems is a plus. Ability to work independently or within a team and manage time effectively. Preferred Qualifications: Certification such as ASQ Certified Quality Inspector (CQI) is a plus. Knowledge of GD&T (Geometric Dimensioning and Tolerancing). Experience with SPC (Statistical Process Control) and root cause analysis tools (e.g., 5 Whys, Fishbone Diagram).

Job Title: Quality Inspector Status: Non-exempt, Hourly Reports to: Quality Manager Hours: 3 open positions (one per shift) 1st shift - 7:30am - 4:00pm 2nd shift - 3:30pm - 12:00am 3rd shift - 11:30pm - 8:00am We are seeking a detail-oriented Quality Inspector to join our manufacturing team. The successful candidate will be responsible for inspecting parts at various stages of the production process to ensure compliance with quality and safety standards. This role is essential to maintaining integrity and ensuring customer satisfaction. Key Responsibilities: Inspect in-process components and finished products for compliance with specifications. Perform visual and mechanical inspections using tools such as calipers, micrometers, gauges, height gauges, and comparators. Accurately document inspection results and maintain quality records. Reject and quarantine non-conforming materials or products and initiate appropriate corrective actions. Read and interpret engineering drawings, blueprints, and technical documents. Conduct first article, in-process, and final inspections. Collaborate with production and engineering teams to resolve quality issues and improve processes. Ensure inspection and testing equipment is properly calibrated and maintained. Participate in internal audits and support external audits when required. Uphold all company quality, safety, and cleanliness standards. Requirements: High school diploma or equivalent; technical certification or vocational training in manufacturing or quality preferred. Minimum of 2 years' experience in a quality inspection role within a manufacturing environment. Proficiency with inspection tools and measuring equipment. Familiarity with quality standards such as ISO 9001. Ability to understand and interpret technical drawings and specifications. Strong attention to detail and excellent organizational skills. Basic computer skills: experience with quality software or ERP systems is a plus. Ability to work independently or within a team and manage time effectively. Preferred Qualifications: Certification such as ASQ Certified Quality Inspector (CQI) is a plus. Knowledge of GD&T (Geometric Dimensioning and Tolerancing). Experience with SPC (Statistical Process Control) and root cause analysis tools (e.g., 5 Whys, Fishbone Diagram).

REVEL BOATS Job Title: Fiberglass Patch Inspector Classification: Non-Exempt Reports to: Job Purpose: A Fiberglass Patch Inspector is responsible for ensuring the quality and integrity of fiberglass repairs for Revel Boats. This role is crucial for maintain the quality and safety of Revel Boats, ensuring they meet customer expectations. Key Responsibilities: Perform tasks under time sensitive deadlines Identify and correct imperfection in the Gel Coat Sand/Buff areas as needed Repair fiberglass molds and tooling using specialty gelcoats, buffing with wax, polish, compound, fillers, putty, and/or paste Use hand tools that may include gel coat spray equipment, drill, buffer, die grinder, polishing compounds, orbital sanders or other specialty tools. Required Skills/Abilities: Minimum of 2 years' experience using hand tools/sanding/buffing Experienced with various pneumatic and power tools. Able to follow instructions. Must be able to work in non-climate-controlled environment where ambient air temperature can exceed outside air temperature. Able to stand for extended periods of time Experience working with fiberglass Able to squat, climb, bend, etc. as needed. Experience using an orbital sander Extremely detailed oriented Education and Experience: High School Diploma or equivalent level of training One or more years of experience in general labor Physical Requirements: Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at waist and knees and stand for extended periods of time. Must be able to lift 50 pounds when necessary. Must be able to climb into and out of the interior of boats. Must be able to wear respirator. Keep the work area clean and orderly. This is a safety-sensitive position. Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to weather conditions, a normal office environment or factory environment that is not climate controlled. The noise level in the work environment is usually moderate. The factory in certain areas maintains a high fiberglass and dust environment. Personal Protective Equipment might be required in certain areas of the factory including but not limited to safety glasses, respirator, hearing protection, gloves, and protective garments. Employees in safety-sensitive positions must report to work fit for duty and must remain fit for duty throughout their workday. To be fit for duty, the employee must not be impaired by alcohol, illicit drugs, or medication. Equal Employment Opportunity Employer Revel Boats provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Revel Boats complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Revel Boats expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Revel Boats employees to perform their job duties may result in discipline up to and including discharge. By signing this job description, you understand your job tasks and responsibilities. According to the Revel Boats policy employees are not eligible for transfer until completion of one year of employment unless initiated by the Company. ______________________________ ______________________________ Employee Signature Date _______________________________ _______________________________ Manager Signature Date

Essential Responsibilities Maintain the highest industry standards regarding cleaning and general upkeep of a property for guest and owner stays. Drive to and inspect cabins for maintenance and housekeeping needs and report any issues in a timely manner. Coordinate with housekeeping to ensure all cabins are complete and ready for guest check-ins. Complete electronic checklists for housekeepers Assist with light maintenance and housekeeping that is needed in the cabins. Place inventory in the cabins, remove any damaged items from the cabins, and report to management for billing Communicate with guests, cabin owners, vendors, and Venture Resorts staff in a professional and courteous manner Work closely with all departments daily, while providing the highest level of owner and guest service. Adheres to applicable federal laws, rules, and regulations including those related to Anti-Money Laundering (AML) and the Bank Secrecy Act (BSA). Other duties as assigned Minimum Required Skills & Competencies: Must possess a valid drivers license and reliable transportation Must be able to work weekends and holidays based on business demands Strong communication skills both verbal and written Organizational skills with strong attention to details Ability to multitask in a fast paced, ever-changing environment Physical Requirements: Ability to lift 30 pounds and exert 30+ pounds of force Use of arms and legs. Frequent standing, walking, carrying, bending, twisting, stooping, reaching, and twisting. Ability to climb several stairs Express or exchange ideas by means of the spoken word via email and verbally Subject to internal and external environmental conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential responsibilities of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential responsibilities. #LI-DNI

Job Title: NASSCO Inspector ***Work Location: Atlanta, GA*** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities : Thorough knowledge of wastewater & sewer rehab construction materials, technologies, and equipment Utilize technical knowledge of construction inspection, construction field management, QA / QC and report documentation, on various construction and/or reconstruction projects for municipal water and wastewater treatment projects Maintains quality assurance requirements and approaches and monitors code compliance issues. Reviews submittals and other construction documents and recommends technical solutions. Prepares test results documentation to relay job progress and describe unusual job site conditions. Learns job-related material through on-the-job training and in a classroom setting regarding field and lab sampling and testing procedures. Education/Experience: High School Diploma, GED or equivalent Minimum 5 years of inspection experience, with a strong background in sanitary sewer systems NASSCO Certified (PACP, MACP and LACP) is required Inspector experience is required GSWCC Level 1B Soil and Erosion Certificate required GWWI Water Distribution System Operator License required Must have a valid driver's license and be insurable. Attention to detail and documentation. Ability to read, understand and follow oral and written instructions. Ability to establish and maintain effective working relationships with clients, employees and the public. Ability to interact with contractors/construction personnel to assure work activities meet required quality. Must be well organized and detail oriented. Physical Requirements: Physically mobile in and around construction sites and field assignments Ability to lift 50 pounds Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. The worker is subject to variable climate and environmental conditions including but not limited to extreme cold and heat. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Job Description NOFS (Northern Ohio Field Services) is currently seeking an experienced Mortgage Inspector to join our growing team in Anderson County TN. As a Mortgage Inspector at NOFS, you will be responsible for conducting inspections on residential properties to ensure occupancy status. This is a Contractor Other position and the successful candidate will work independently, without supervision, to complete assigned tasks accurately and efficiently Apply at ************************ Compensation & Benefits: We offer a fee for each inspection. This fee varies by location and volume. You can expect to earn between $25 and $35 per hour. As a contractor, you will also have the opportunity to set your own schedule and work autonomously. Responsibilities: - Conduct residential property inspections to ensure occupancy status, deliver delinquency letters, conduct insurance inspections - Utilize inspection software and tools to document and report findings - Take photos of properties and deliver documents as needed - Complete inspections within designated timelines and meet performance metrics - Communicate with account manager in a professional manner - Keep up to date with industry regulations and guidelines - Maintain accurate records and documentation of inspections - Maintain professionalism at all times. Requirements: - Drivers License, insurance and reliable transportation. Must pass background check to obtain Aspen Grove number, not reimbursed. - Prefer 6 months in the inspections field, or working as a 1099 employee - Strong attention to detail and excellent time management skills - Proficient with technology and able to learn new software and tools quickly - Excellent communication and customer service skills - Ability to work independently and meet deadlines - Ability to travel to various properties in Anderson County and potentially other surrounding counties. Apply at ************************ EEOC Statement: At NOFS, we are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

FMM is seeking a motivated professional to fill our Lighting Inspector contract position. FMM is a maintenance and construction company located in Denham Springs, LA servicing both residential and commercial clients nationwide. At FMM, we are committed to providing superior levels of service to our clients while maintaining our core values of Quality, Teamwork, Integrity, Safety, and Versatility. Job Summary The Lighting Inspector will perform quarterly lighting inspections at night for our commercial bank clients. Lighting inspections will be performed in the evening and overnight hours while lighting requirements can be fully measured. Inspections are performed at each location once a quarter and pay is contingent upon the completion per location. Essential Job Duties and Responsibilities: ( Included but not limited to) Take inspection photos of facilities operated by bank clients of FMM. Document the overall site lighting, particularly whether lights are operating or not, and with special emphasis on the lighting in and around the ATM and Night Drop equipment. Upload photos and a site diagram showing any outages. Light meter reading will need to be taken, recorded, and sent to FMM for review twice a year. Required Skills and Abilities: 1-2 years of experience Willing and able to learn new computer programs Ability to pass a drug screen Ability to travel regionally to various client sites as needed Locations: This position will be in charge of the Southeast and Northeast Tennessee Region including the following cities: Chattanooga, Cleveland, Maryville, Soddy Daisy, Sevierville, Lookout Mountain, Gatlinburg, Signal Mountain, Pigeon Forge, Collegedale, Knoxville, Bristol, Greeneville, Rogersville, Rockwood, Kingsport, Jonesborough, Newport, Elizabethton, Dandridge, Johnson City, Morristown, Blountville, Mosheim, Farragut, and Ringgold, GA Appx number of locations: 73 sites Pay per location: $30 At FMM, we provide our clients with high quality, high value maintenance and constructions services while maintaining superior levels of communication, professionalism, integrity, and honestly with our staff, clients, suppliers, and professional associates. Our core values of Quality, Teamwork, Integrity, Safety, and Versatility are our driving force. If you are an individual who possesses these values, we look forward to hearing from you. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. FMM is a maintenance and construction company that services both residential and commercial properties. Our mission is to provide our clients with high quality, high value maintenance and construction services while maintaining superior levels of communication, professionalism, integrity and honesty with our staff, clients, suppliers, and professional associates. Our team is comprised of experienced individuals who hold the same values of FMM: Quality, Teamwork, Safety, Versatility, and Integrity. Each day we strive to hold these values at the forefront of our service and our daily actions. We are excited about the growth of our company over the years and look to continue our growth for years to come. We have been honored as one of Inc 5000's Fastest Growing Companies and as one of LSU Top 100 Tiger Businesses for multiple years. Our growth and success come from the quality individuals who make up our team, and we look forward to the expansion of that team in the years to come.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Roane, Rhea, Morgan, Fentress, Cumberland, Loudon, Scott Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Job Title: Quality Inspector Status: Non-exempt, Hourly Reports to: Quality Manager Hours: 3 open positions (one per shift) 1st shift - 7:30am - 4:00pm 2nd shift - 3:30pm - 12:00am 3rd shift - 11:30pm - 8:00am We are seeking a detail-oriented Quality Inspector to join our manufacturing team. The successful candidate will be responsible for inspecting parts at various stages of the production process to ensure compliance with quality and safety standards. This role is essential to maintaining integrity and ensuring customer satisfaction. Key Responsibilities: Inspect in-process components and finished products for compliance with specifications. Perform visual and mechanical inspections using tools such as calipers, micrometers, gauges, height gauges, and comparators. Accurately document inspection results and maintain quality records. Reject and quarantine non-conforming materials or products and initiate appropriate corrective actions. Read and interpret engineering drawings, blueprints, and technical documents. Conduct first article, in-process, and final inspections. Collaborate with production and engineering teams to resolve quality issues and improve processes. Ensure inspection and testing equipment is properly calibrated and maintained. Participate in internal audits and support external audits when required. Uphold all company quality, safety, and cleanliness standards. Requirements: High school diploma or equivalent; technical certification or vocational training in manufacturing or quality preferred. Minimum of 2 years' experience in a quality inspection role within a manufacturing environment. Proficiency with inspection tools and measuring equipment. Familiarity with quality standards such as ISO 9001. Ability to understand and interpret technical drawings and specifications. Strong attention to detail and excellent organizational skills. Basic computer skills: experience with quality software or ERP systems is a plus. Ability to work independently or within a team and manage time effectively. Preferred Qualifications: Certification such as ASQ Certified Quality Inspector (CQI) is a plus. Knowledge of GD&T (Geometric Dimensioning and Tolerancing). Experience with SPC (Statistical Process Control) and root cause analysis tools (e.g., 5 Whys, Fishbone Diagram).

Description: REVEL BOATS Job Title: Fiberglass Patch Inspector Classification: Non-Exempt Reports to: Job Purpose: A Fiberglass Patch Inspector is responsible for ensuring the quality and integrity of fiberglass repairs for Revel Boats. This role is crucial for maintain the quality and safety of Revel Boats, ensuring they meet customer expectations. Key Responsibilities: Perform tasks under time sensitive deadlines Identify and correct imperfection in the Gel Coat Sand/Buff areas as needed Repair fiberglass molds and tooling using specialty gelcoats, buffing with wax, polish, compound, fillers, putty, and/or paste Use hand tools that may include gel coat spray equipment, drill, buffer, die grinder, polishing compounds, orbital sanders or other specialty tools. Required Skills/Abilities: Minimum of 2 years' experience using hand tools/sanding/buffing Experienced with various pneumatic and power tools. Able to follow instructions. Must be able to work in non-climate-controlled environment where ambient air temperature can exceed outside air temperature. Able to stand for extended periods of time Experience working with fiberglass Able to squat, climb, bend, etc. as needed. Experience using an orbital sander Extremely detailed oriented Education and Experience: High School Diploma or equivalent level of training One or more years of experience in general labor Physical Requirements: Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at waist and knees and stand for extended periods of time. Must be able to lift 50 pounds when necessary. Must be able to climb into and out of the interior of boats. Must be able to wear respirator. Keep the work area clean and orderly. This is a safety-sensitive position. Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to weather conditions, a normal office environment or factory environment that is not climate controlled. The noise level in the work environment is usually moderate. The factory in certain areas maintains a high fiberglass and dust environment. Personal Protective Equipment might be required in certain areas of the factory including but not limited to safety glasses, respirator, hearing protection, gloves, and protective garments. Employees in safety-sensitive positions must report to work fit for duty and must remain fit for duty throughout their workday. To be fit for duty, the employee must not be impaired by alcohol, illicit drugs, or medication. Equal Employment Opportunity Employer Revel Boats provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Revel Boats complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Revel Boats expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Revel Boats employees to perform their job duties may result in discipline up to and including discharge. By signing this job description, you understand your job tasks and responsibilities. According to the Revel Boats policy employees are not eligible for transfer until completion of one year of employment unless initiated by the Company. ______________________________ ______________________________ Employee Signature Date _______________________________ _______________________________ Manager Signature Date Requirements:

NOFS (Northern Ohio Field Services) is currently seeking an experienced Mortgage Inspector to join our growing team in Anderson County TN. As a Mortgage Inspector at NOFS, you will be responsible for conducting inspections on residential properties to ensure occupancy status. This is a Contractor Other position and the successful candidate will work independently, without supervision, to complete assigned tasks accurately and efficiently. Compensation & Benefits: We offer a fee for each inspection. This fee varies by location and volume. You can expect to earn between $20 and $30 per hour. As a contractor, you will also have the opportunity to set your own schedule and work autonomously. Responsibilities: - Conduct residential property inspections to ensure occupancy status, deliver delinquency letters, conduct insurance inspections - Utilize inspection software and tools to document and report findings - Take photos of properties and deliver documents as needed - Complete inspections within designated timelines and meet performance metrics - Communicate with account manager in a professional manner - Keep up to date with industry regulations and guidelines - Maintain accurate records and documentation of inspections - Maintain professionalism at all times. Requirements: - Drivers License, insurance and reliable transportation. Must pass background check to obtain Aspen Grove number, not reimbursed. - Prefer 6 months in the inspections field, or working as a 1099 employee - Strong attention to detail and excellent time management skills - Proficient with technology and able to learn new software and tools quickly - Excellent communication and customer service skills - Ability to work independently and meet deadlines - Ability to travel to various properties in the Fort Wayne area, to include entire county of Allen EEOC Statement: At NOFS, we are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.