Inspector jobs in Lakewood, OH

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Job Description We are seeking an experienced Senior Quality Inspector to join our aerospace manufacturing team. This role is responsible for performing detailed incoming, in-process, and final inspections to ensure components and assemblies meet the highest industry standards. The ideal candidate has extensive experience working with extremely tight tolerances (as low as 0.0002”) and will play a key role in ensuring compliance with customer, company, and regulatory requirements. Key Responsibilities: Perform incoming, in-process, and final inspections of aerospace components and assemblies. Verify parts and assemblies against engineering drawings, specifications, and customer requirements with tolerances down to 0.0002” (2/10,000). Use a wide range of precision measuring instruments (micrometers, calipers, CMM, height gauges, optical comparators, etc.). Document and report inspection results, including nonconformances, in accordance with AS9100/ISO 9001 quality standards. Support root cause analysis and corrective/preventive action (RCCA/CAPA) activities. Assist with First Article Inspections (FAIs) in compliance with AS9102 requirements. Work closely with production, engineering, and quality teams to resolve quality issues. Mentor and provide guidance to junior inspectors and production staff on inspection best practices. Requirements: 5+ years of experience in quality inspection within the aerospace or precision manufacturing industry. Proven ability to work with tight tolerances (2/10,000”) and complex precision parts. Proficiency with precision measuring tools and equipment; CMM experience preferred. Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) and ability to interpret complex aerospace blueprints. Experience with FAIs (AS9102), inspection reports, and nonconformance documentation. Familiarity with AS9100 and ISO 9001 standards. Strong computer skills for inspection documentation and reporting (ERP/MRP/QMS experience a plus). Excellent attention to detail, analytical skills, and problem-solving ability. Must successfully pass a pre-employment eye exam to verify visual acuity required for precision inspection. Preferred Qualifications: Prior experience in a lead or senior inspector role. Knowledge of special processes (plating, coating, heat treat, etc.) inspection. Experience supporting customer audits and regulatory compliance.

BWXT traces its history back to the 1850s with the invention of the water tube boiler. Operating for many years as a part of The Babcock & Wilcox Company, our company has long been at the forefront of the commercial nuclear power generation and government nuclear industries, achieving an impressive number of firsts in both businesses. In 2015, The Babcock & Wilcox Company spun off its power generation business to allow BWXT to focus on government and nuclear operations. Job Description BWX Technologies Inc. is looking for the ideal candidate to fulfill the role of Technologist 4 as part of their Nuclear Equipment Manufacturing organization. This role functions out of a regional group to manage, verify effectiveness and continuously improve the NDE training, qualification and oversight program. Additional duties include providing technical counsel and supporting sites and their suppliers in order to ensure the highest level of reliability and compliance. The position may develop and administer training and testing programs related to both commercial and military non-destructive testing specifications relative to the following methods: Radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. Qualifications Qualifications in at least four (4) of the following methods: radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. In addition, the demonstration of proficient knowledge in NAVSEA 250-1500-1, MIL-STD-2132 and ASME Section III through previous work experience is a preferred. Experience as a Level III or Examiner is preferred. The candidate must be currently certified or be capable of attaining certification within 6 months in at least four (4) of the methods listed above in accordance with NAVSEA 250-1500-1 and SNT-TC-1A. Additional Information All your information will be kept confidential according to EEO guidelines.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job Title: Precision Parts InspectorHours & Location: Schedule: Monday through Friday, 7:00 AM - 3:30 PM Pay & Benefits: Starting Pay: $27.00-$29.00/hr, based on experience Contract-to-Hire: Raise upon direct hire, with additional increases at 1-year and 2-year marks Comprehensive Benefits after Hire: Low-deductible medical coverage Free dental and vision insurance 401(k) with company match Paid holidays and vacation Life insurance Christmas bonuses and employee appreciation lunches Job Responsibilities: Inspect precision-machined components to ensure compliance with technical drawings and customer specifications Use micrometers, calipers, height gauges, and other measuring tools Conduct and document First Article Inspections Identify defects and collaborate with manufacturing teams to resolve issues Maintain and verify calibration of inspection equipment Work closely with Quality Assurance and Engineering to refine inspection processes Lift up to 50 lbs as needed Required Qualifications: 4+ years of experience in a manufacturing inspection role Strong blueprint and schematic reading skills Familiarity with various measurement tools and inspection techniques Solid math and communication skills Ability to multitask, stand for extended periods, and work overtime when needed Must be fluent in English (spoken and written) Pre-employment 5-panel drug screen and background check required Work Environment & Culture: This is a clean, air-conditioned, and highly organized 45,000 sq. ft. facility that specializes in precision CNC plasma and waterjet cutting machinery. The company has a strong legacy, now in its fourth generation of family ownership. You'll be joining a team that values long-term careers, offers stable employment, and treats every employee like family.

Job Description Now Hiring: Quality Inspector Manufacturing 2nd shift Pay: $17.50 - $20.00/hour - based on experience Schedule: Monday through Friday 3:00pm to 11:30pm Job Summary: As a Quality Inspector you'll play a critical role in ensuring that our precision-manufactured products meet the highest quality standards. We're looking for detail-driven professionals with a strong background in manufacturing inspections. Objectives: Ensure compliance with Company quality standards and QMS requirements Uphold the company mission and core values with professionalism and urgency Promote teamwork, ethics, and a respectful workplace Key Responsibilities: Perform in-process, first-piece, and final inspections of machined and washed parts Inspect cut-blanks, stamped/threaded nipples, and special orders Approve manufacturing setups and ensure products meet specs Use inspection tools (micrometers, calipers, indicators, etc.) Document inspection results and maintain traceability records Communicate with supervisors on any quality concerns or needed adjustments Inspect purchased products using defined measurements and criteria Support production metrics: accuracy, on-time delivery, and quality Maintain a safe and organized work environment Requirements: High school diploma, GED, or equivalent 3+ years' experience in manufacturing or inspecting precision machined parts Proficient in reading blueprints and GD&T Skilled in basic math and computer use Detail-oriented; able to identify fine surface flaws Strong communication and teamwork skills Excellent attendance and work habits Physical ability to: Stand/bend for full shifts Lift 50 lbs. continuously, 70 lbs. occasionally Push/pull carts up to 150 lbs. Move 12-24 ft lengths of pipe Willing to work overtime as needed Be part of a company that values quality, safety, and continuous improvement Opportunity to work with a professional team in a stable, growth-focused environment

Inspector SUPERVISOR: Director STATUS: Non-Exempt SUMMARY: Performs inspections of housing units for the Housing Choice Voucher (HCV) Program in accordance with federal, state, and local building codes; and U.S. Department of Housing and Urban Development (HUD) Housing Quality Standards (HQS) requirements, including identification of potential lead hazards. May also include a range of activities related to providing customer service to HCV participants, HCV owners and stakeholders. DUTIES AND RESPONSIBILITES: The below statements are intended to describe the general nature and scope of work performed under this position. This is not a complete listing of all responsibilities or skills required. Other duties may be assigned. · Performs initial and annual inspections of housing units for the Housing Choice Voucher Program in accordance with federal, state, and local building codes; and U.S. Department of Housing and Urban Development (HUD) Housing Quality Standards (HQS) requirements, including identification of potential lead hazards. · Performs re-inspections of previously failed units and follows up on complaints to ensure compliance with building codes and Housing Quality Standards. · Completes inspection checklists and documents HQS violations using required software. · Files inspection reports and accompanying documents in the electronic file management system. · Process all transactions into SharePoint and PHA business system · Receive and respond accurately and professionally, to customer inquiries/concerns received via telephone, email or office visit. · Provide excellent customer service to participants, landlords, co-workers, clients and vendors · Obtain certification in Housing Choice Voucher Specialist within 120 days of employment · Ensure regular attendance and punctuality · Perform other duties as assigned RESPONSIBILTY FOR RELATIONSHIPS: Internal: Provide excellent customer service to staff, management and corporate personnel External: Provide excellent customer service to clients and vendors SUPERVISOR AUTHORITY None SUPERVISION PROVIDED Operates under the direct general supervision of the Inspections Supervisor. KNOWLEDGE AND SKILLS REQUIRED: Must have the ability to interpret and apply regulations pertaining to the program. Must be able to communicate effectively both orally and in writing and have excellent interpersonal skills and possess strong computer and organizational skills. Ability to learn, follow and apply complex regulations and procedures and work with Excel, Word, Outlook and agency specific data-base systems EDUCATION AND EXPERIENCE REQUIRED: Must have a High School Diploma or; a minimum of two years of progressively responsible work experience for a public agency, or related work in the social service or community service field preferred. ADDITIONAL REQUIREMENTS AND QUALIFICATIONS: Must have a valid Driver's License and reliable vehicle. Must successfully complete the Certification of HQS Training, PII Training and Lead Based Paint Certification Training within 120 days of employment.

Inspectors are responsible for inspecting, testing, and maintaining fire sprinkler systems, fire pumps, and backflows with minimal supervision. * Inspect, test, and maintain fire protection systems in accordance with NFPA codes with working knowledge of sprinkler controls, alarm panels, devices and critical components. * Record and report deficiencies of fire protection systems to SFS and Customers. * Communicate with internal and external customers as well as offsite monitoring companies in a professional manner. * Proper use and operation of tools required to complete the inspection (heat and smoke detector kit, backflow kit, pump equipment) * Plan, coordinate, and complete inspections as scheduled in a timely manner. * Required to be in an on-call status as required by location to handle emergency service and inspection requests * Ensure company provided vehicle is clean and well maintained as required by company policies. * Ensure that all assigned tools are safeguarded and maintained. * Understand and follow SFS's Safety program, SDS book, Hazardous communication program, policies and procedures. Participate in weekly Toolbox talks. Inspectors must know where all related safety documentation is at all times on each project. * Attend seminars from time to time to stay abreast of changing technology, installation and testing approaches. * Train inspector trainees in all applicable aspects of fire protection. * Other duties may be assigned. QUALIFICATIONS: The qualifications listed below are representative of the elements required to perform the job successfully, however in some cases, an equivalent combination of Education, Training, Certifications and Experience may meet the job qualifications. Education, Training, Certifications: * HS Diploma or equivalent, required. * NICET and/or state required certification required based on location, preferred. Experience, Knowledge, Skill Requirements: * 3-5 years' experience inspecting fire protection systems required. 5+ years' experience preferred. * Must be able to work alone and as part of a team. Basic math skills, mechanical aptitude, problem solving skills, customer service skills, decision making skills, ability to multitask, ability to meet project schedules, ability to plan and organize, troubleshooting skills, and the ability to train other is required. Communication Skills: * Must have the ability to effectively read, write and communicate in English with employees and customers. Systems and Software Skills: * Ability to operate a computer, tablet and read electronic blueprints required. Experience with SalesForce and Microsoft Office is preferred. Other Qualifications: * Valid driver's license with acceptable driving record required. * Must be able to comply with SFS's Drug and Alcohol policy and Background screening requirements, which may also include customer specific requirements based on contractual agreement PHYSICAL & WORK ENVIRONMENT REQUIREMENTS: Reasonable accommodations may be made to enable individuals with disabilities to perform Essential Job Duties. Physical Requirements: While performing the duties of this job, the employee is frequently required to bend, ascend and descend step stools, ladders and stairs, kneel, lift 50lbs, sit, stoop, twist, and work at heights. Work Environment: Frequent local travel and occasional regional and non-regional travel is required. Employee will frequently be required to work inside and outside in hot/cold temperatures and be exposed to loud noises, cramped quarters, dust, fumes and odors, standing on hard surfaces, and electrical hazards frequently. Employees will occasionally be exposed to chemicals, moving machinery, uneven and slippery surfaces. Employee must consistently wear all appropriate personal protective equipment, as required by company safety policies. We are fully committed to equal opportunities for employment to all individuals regardless of race, national origin, gender, religion, sexual orientation, disability, familial status, and any other classification protected under the law. We are an Equal Opportunity, Affirmative Action employer. While this job description is intended to be an accurate reflection of the position, management reserves the right to modify, add, or remove duties and to assign other duties as necessary. #LI-JV1 Are you interested in working for the nation's leading fire protection company and beginning a rewarding and satisfying career that helps save the lives of thousands each year? Do you want to be a part of a growing and expanding team of industry experts? If so, exploring career opportunities with Summit Fire & Security may be right for you! Summit Fire & Security, a subsidiary of SFP Holding, Inc. (Summit Companies), is a full-service provider for fire detection, suppression, and security with a full suite of capabilities that includes design, installation, testing, inspections, and maintenance. We serve customers across many verticals on a local, regional, and national scale. We're proud of our well-deserved reputation for quality work that's completed by our talented and experienced installation workforce. Summit Fire & Security is a dynamic organization with endless growth opportunities spanning over 70 locations in more than 20 states. Our company is consistently recognized for service excellence in the fire protection industry. Summit Fire & Security supports trade skills and workforce development by hosting Recognized Apprenticeships and on-the-job training (OJT) programs for new career-seekers. Many members of our leadership chair NFPA code compliance committees, serve on regional safety boards, and support technical education in local schools. Summit Fire & Security supports employees in their professional development by offering continued development, training, and education by encouraging NICET and other career-advancing certifications. We offer reimbursement for certain career development programs in addition to potential bonuses for specific certifications. We continually strive to be the Employer of Choice for highly motivated team members who want to succeed in a high-growth environment. We encourage initiative, independence, diversity, and personal career growth. Demonstrating the combination of experience, knowledge, and customer service is the key to our performance and helps us achieve our goal of providing the highest quality fire protection services possible to protect lives and property. Benefits Summit Fire & Security offers extensive training opportunities, career advancement, competitive pay, bonus opportunities, along with an industry leading and affordable benefits package for eligible employees. Our benefits package includes: * Paid Vacation and Holidays * Medical Insurance * Dental Insurance * Vision Insurance * 401(k) Plan with Company Match * Flexible Spending Accounts * Long-Term Disability - Employer Paid * Short-Term Disability - Employer Paid * Additional Voluntary Ancillary Benefits such as Accident and Hospital Indemnity * Life Insurance for Team Members and Dependents * Employee Assistance Program * Employee Referral Program Our Core Values PIPE * We are PASSIONATE about life safety * We have INTEGRITY (Do the right thing) * We work in PARTNERSHIP with our customers and community * We constantly strive for OPERATIONAL EXCELLENCE (Do things right) Summit Fire & Security participates in E-Verify & in alignment with our commitment to safety, we promote a drug-free workplace. Summit Fire & Security is an equal-opportunity employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as a protected veteran, among other things, or status as a qualified individual with a disability.

We are looking for a person to inspect parts and assist with supervision of quality control activities on the first shift. This is a hands-on position. Responsibilities: The quality control inspector is responsible for reviewing current production parts to ensure that they meet customer requirements. The inspector works with the operators to inform them what acceptance standards are and notifies supervisors when a problem is found. The quality control inspector may at times rework parts before final shipments. Requirements: Manufacturing experience Some quality control inspection experience in a manufacturing environment. Some supervisory experience. Willingness to work in a foundry environment to do the required tasks. Preferred: Experience with handheld measurement tools such as calipers and dial indicators Experience with castings

Job Description We are looking for a person to inspect parts and assist with supervision of quality control activities on the first shift. This is a hands-on position. Responsibilities: The quality control inspector is responsible for reviewing current production parts to ensure that they meet customer requirements. The inspector works with the operators to inform them what acceptance standards are and notifies supervisors when a problem is found. The quality control inspector may at times rework parts before final shipments. Requirements: Manufacturing experience Some quality control inspection experience in a manufacturing environment. Some supervisory experience. Willingness to work in a foundry environment to do the required tasks. Preferred: Experience with handheld measurement tools such as calipers and dial indicators Experience with castings

Lingo Staffing is Now Hiring for a Quality Control Inspector in Hartville, OH Hours: 1st Shift: 7:30am- 4pm ($15) 2nd Shift: 3:30pm-12:00am ($16/hr) Days: Monday-Friday Pay: $15/hr (1st shift) • $16/hr (2nd shift) Short Description: We are seeking reliable and detail-oriented Quality Control Inspectors for a fast-paced plastics manufacturing environment in Hartville, OH. QC Inspectors are responsible for performing first-piece inspections, monitoring in-process quality, completing documentation, auditing packaging, identifying defects, and ensuring all production meets LMT's established quality standards. Candidates must be comfortable working independently, communicating across shifts, and maintaining accuracy throughout the shift. Requirements: Minimum 1 year experience in manufacturing or similar environment (plastics preferred) High school diploma or GED Ability to inspect parts visually and identify defects (splay, burns, shorts, contamination, flash, etc.) Ability to complete inspection paperwork, production sheets, and documentation accurately Able to use scales, gauges, check fixtures, and basic testing tools Ability to read, compare, and verify first-piece samples Strong attention to detail and accuracy Ability to follow written and verbal instructions Good communication skills; able to communicate across shifts Must be dependable and able to work with minimal supervision Must be willing to comply with a national background check ? Physical Requirements: This position requires the ability to walk extended distances (approximately 2.5+ miles per day) and remain on your feet for the entire shift. Employees must be able to bend, twist, stand, stoop, and lift as part of daily duties, with or without reasonable accommodation. We Are Seeking Candidates Who Have Held the Job Titles of: Quality Inspector, Quality Assurance Technician, Manufacturing Inspector, Production Inspector, or Assembly Quality Checker #INDAKR

HOUSING MAINT CODE $25.47/Hour Part Time - Non-Benefit 06/04/2025 04:15PM EDT Open Until Filled 51471 - Property Maintenance Inspector - Part Time - OUF 6.4.25.pdf

Perform daily incoming/outgoing quality inspections as required by repair procedures. RESPONSIBILITIES Maintain quality inspection and performance documentation Advise repair team of corrective actions to correct repair quality issues Ensure adherence to standards relating to assembly revision levels, repair procedures, and quality standards Ensure proper packaging and shipment of repaired components as required by documented procedures Create and modify repair records as needed Daily computer input into business system, (SAP), of all aspects of the shipping process Perform all work with safety in mind and ensure that all safety measures are met QUALIFICATIONS HS Diploma/GED Two years of experience in shipping and receiving Additional three to five years' experience in assembly Vertiv training on documentation, repair procedures, and quality specifications Working knowledge of Microsoft Office applications and ability to utilize existing business systems such as SAP The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $5 billion in sales, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

A Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects or deviations from quality requirements. Quality Inspectors use various tools and techniques to measure and evaluate the quality of materials, components, and finished products. They document and report any non-conformities and work closely with production teams to address quality issues and implement corrective actions. Additionally, they may participate in the development and improvement of quality control processes and procedures. Supervision: Essential Responsibilities Perform visual, mechanical and electrical inspections, and testing of all equipment manufactured at Powell facilities according to Powell Standards. Program and operate electronic equipment such as microprocessor-based relays. Energize Powell electrical products and other buyout equipment such as service Panels, HVAC, Battery Chargers, UPS System, etc. Perform equipment failure investigations and root cause analysis. Complete and maintain all test Quality Control documentation as required. Perform maintenance on test equipment as needed. Perform tests using equipment such as multi meter, clamp-on-meter, voltage detector, Hi-Pot, etc. Interaction with all departments (shop, engineering, sales, shipping, fabrication, PCR, switchgear) including customers to work to resolve quality related issues. Interaction with all departments during production, final inspection and final release to shipping is required. External relationships may include regular interaction with other Powell subsidiaries, suppliers and customers. Record Engineering and Shop discrepancies, non-conformities and material shortages utilizing Powell systems. Participates in continuous improvement projects. Promote a safety culture as well as attend all safety meetings. Ensure quality by following standard work instructions and identifying any potential risks to product quality. Ensure that work areas remain clean and well organized. Learn and understand basic electrical principals and relevant Mechanical experience. Minimum Qualifications High School Diploma or General Education Diploma, or a Trade School diploma or certificate Minimum 1-3 years' experience in manufacturing environment. Ability to read prints including specification sheets, wiring diagrams, schematics, three-line drawings, wiring lists and part drawings. Preferred Qualifications Experience in Quality inspection for electrical or electronic equipment or components preferred Intermediate experience working with industry codes and standards and able to refer to applicable codes. Skills, Abilities & Other Requirements Ability to apply industry standards as applicable to job and product. Actively seeks out self-development through internal or external programs that contributes to knowledge, skill and abilities. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within a team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Must be proficient in the English language, both written and verbal. Working & Environmental Conditions Working Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. Required to always wear personnel protective equipment (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required. Working at a desk and computer in an office environment is required. Must be able to work from all types of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding. Working at heights usually no higher than 30 feet in the air or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously. Continuous standing, walking 50-300-foot distances for long periods of time with only occasional sitting. Must be able to climb stairs frequently throughout the shift. Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently. Using upper extremities to apply or exert a force continuously up to 50lbs. Ability to use hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time with frequent repetition. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.

Quality Inspector - 1st shift Painesville, OH manufacturer to the bearings industry is currently hiring for a 1st shift Quality Inspector -Needing 2+ years within Quality inspection of machined metal parts Starting Rate: $22 to $25 hourly 1st Shift: 7am to 3:30pm The candidate must possess: Good mechanical inspection skills (mic's, calipers, height gages etc.) Blueprint reading Experience with plate layout and inspection techniques Knowledge of AS9100 and ISO9001 Attention for detail and stay current on latest initiatives, policies, and procedures while proposing ideas for improvement. Critical thinkers welcome. Experience with the following a plus: Knowledge of manufacturing methods and procedures Ability to perform calibration of hand tools Ability to perform capability and gage R&R studies #AIS11

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Pay = $3,320 monthly working 4-5 days per week

Job Description Dyson Corporation headquartered in Painesville, OH is seeking a quality control professional for reviewing and testing materials, components, and finished products to ensure they meet specifications and quality standards using various tools like calipers, gauges, and micrometers. The quality department performs inspections on materials and products, monitoring production processes, documenting issues and corrective actions, ensuring compliance with standards, and collaborating with various teams to resolve problems. PRINCIPAL DUTIES AND RESPONSIBILITIES: Inspect in-process and finished products using micrometers, calipers, gauges, and other precision tools. Review and maintain quality records for accuracy and completeness. Interpret blueprints and work orders to verify product specifications. Document nonconforming materials and support corrective actions. Collaborate with production and engineering teams to resolve quality issues. Maintain a clean and organized work area. Meet production goals and perform additional duties as assigned. REQUIREMENTS: High School Diploma or GED required. 1-3 years of quality control experience in a manufacturing setting. Proficient in using inspection tools: micrometers, calipers, thread & pin gauges, surface plates, and height gauges. Ability to read and interpret technical documents and blueprints. Strong communication skills and a team-oriented mindset. PHYSICAL REQUIREMENTS: Ability to work on the shop floor for extended periods. Must be able to lift up to 50 lbs. Strong visual acuity is essential. Dyson Corporation is a leading manufacturer of large diameter fasteners and forgings, proudly headquartered in Painesville, Ohio. With over 130 years of industry expertise, we are committed to precision, quality, and innovation. Join a team where craftsmanship meets opportunity. What We Offer Career Growth: Opportunities to advance within the Quality, Production, or Engineering departments. Training & Development: On-the-job training and mentorship to support your professional growth. Team Culture: Work with experienced professionals in a collaborative and supportive environment. Stability: Be part of a company with a long-standing reputation for excellence. Dyson Corporation offers a competitive pay range and industry leading benefits while also being committed to working with and providing reasonable accommodation to individuals with disabilities. Dyson Corporation is an equal opportunity employer - M/F/Veteran/Disability. We are a drug-free workplace and conduct pre-employment screening as a condition of employment.

Job Title: Fire Protection QC Inspector - Kitchens & Fire Extinguishers Location: Akron, OH Silco Fire & Security isn't just a company, it's a mission. Every day, our team plays a vital role in protecting lives and property for over 45,000 businesses across Ohio, Kentucky and surrounding states. We design, install, maintain and monitor fire protection and security systems that keep people safe and businesses compliant. As the market leader in the Midwest, Silco is a growing, family-owned company with over 400 employees working from our headquarters in Cincinnati and branches in Dayton, Columbus, Toledo, Akron, Cleveland and Louisville. Recognized as a Top Workplace and named to the Inc. 5000 list of fastest-growing private companies, we have a long-standing track record of success and ambitious goals for the future. Our impact extends beyond fire alarms and sprinklers. We provide peace of mind to the communities we serve. At Silco, you're not just doing a job, you're making a difference. Position Overview: We are seeking a highly skilled and experienced Quality Control Inspector with a minimum of 5 years of expertise in the fire protection industry. The ideal candidate will play a crucial role in ensuring that our products and installations adhere to the highest standards. Responsibilities: Conduct Quality Inspections: Performing Quality Checks on inspections that have been performed on Kitchen Fire Protection Systems and Fire Extinguishers Ensure that inspections and installations comply with state and NFPA codes and regulations. Documentation and Reporting: Maintain detailed records of inspection findings, documenting any deviations or non-compliance issues. Generate comprehensive reports daily that will be distributed to employees and their managers. Collaboration: Work closely with Operation Managers, Supervisors, and service and installation teams to address quality concerns, provide guidance on corrective actions, and improve our quality standard. Provide consultations with techs and suggested follow up training when needed. Continuous Improvement: Participate in the development and implementation of quality control procedures and protocols. Identify opportunities for process improvements to enhance overall efficiency and effectiveness. Training and Development: Provide training to inspection teams on quality control standards, best practices, and regulatory requirements. Stay informed about industry advancements and changes in codes and standards. Qualifications: Minimum of 5 years of experience within the fire protection and life safety systems industry. Experience with Kitchen Suppression Systems and Fire Extinguishers is preferred. In-depth knowledge of relevant codes and standards (i.e. NFPA, local building codes). Strong attention to detail and excellent analytical skills. Ability to work independently and collaboratively within a team. Benefits: In addition to a competitive compensation package, Silco offers a wide range of benefits such as medical, dental, vision, Aflac and a Flexible Spending Account (FSA). Silco offers company paid short-term disability and life insurance, as well as company paid training. The Company also boasts a 401(k) program with company matching and tuition reimbursement. Silco provides paid holidays and generous paid time off. Employment at Silco is contingent upon completing and passing a background check and drug screen. Silco is an Equal Opportunity Employer.

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.