Inspector jobs in Little Rock, AR

Job Description Responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Performs duties as assigned.

Are you looking to join an innovative engineering consulting firm with a strong gas utility team that supports clients in over 35 different industries? Entrust Solutions Group has embraced growing markets such as renewables, power engineering services, EV infrastructure, data analytics, and geospatial with cutting edge engineering, consulting, and automation services. We have a current need for a Field Inspector based in Hot Springs, Arkansas. Responsibilities: * Field Inspector for natural gas projects distribution projects * Main replacement projects * Maintain a professional relationship with client and their contractors other team members, and consistently deliver excellent client work. * Travel 70% - 80% of time Requirements: * Inspector with plastic experience * Enjoys working in the field * Possession of a valid Driver's License and a satisfactory driving record is an ongoing requirement. ENTRUST Solutions Group, an ENR Top 100 company, is a community of people, 3,000+ strong, who are committed to our clients and each other. We provide comprehensive and dependable engineering, consulting, and automation services to gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. In return for top talent, ENTRUST Solutions Group offers: * Generous paid time off and benefits * 401(k) retirement program with a company match * Career development programs * Tuition reimbursement * Flexible work schedule To learn more about ENTRUST Benefits and Culture, please visit our company LinkedIn page and follow us at: ****************************************************** #LI-SF1

We are currently recruiting for a Detail Inspector job in Miami Florida. You'll be working with a company that performs full CFM56 performance restorations, special repairs, piece parts and module repairs as well as engine exchanges and field service support globally. They are a high-performance FAA 145 / EASA Certified Repair Station and a CASE registered organization. They specialize in offering creative and cost-effective solutions for the CFM56 (-7B, -5B, -3) Engine Series by maintaining its 3 cornerstones - Custom Tailored Solutions, Extraordinary Responsiveness and World Class EGT Margins. What Is In It For You Salary: $30-$40 hour (depending on relevant experience) Benefits: Health, Dental and Vision insurance; Life insurance; Short term and long-term disability; Aflac supplemental insurance; Paid vacation and sick days; Paid holidays; 401k with employer match OUR CLIENTS STORY Our client has been established since 2009 and has had a breakthrough in the jet engine maintenance industry serving airlines, lessors, and aviation organizations worldwide. Being part of this company means having opportunities to make a difference. They are committed to Quality and continually invest in people, processes and technology in support of this. They place great priority in their employees and building up their team members. They are committed to building their employees and growing them to become great leaders. This adds tremendous value not only to their organization, but also to their community and to everyone that is touched by the passion their workforce has to offer. JOB DESCRIPTION The Inspector will follow articles in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden damage, in process and final inspections on civil aviation on aviation airworthiness directives, government and industry standard practices and other data acceptable to or approved by the FAA. ESSENTIAL JOB FUNCTIONS FOR THE DETAIL INSPECTOR POSITION IN MIAMI,FL: A Day In The Life of a Detail Inspector: Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools and equipment used within their assigned area of responsibility. Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed. Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed. Understand the current specifications involving inspection tolerances, limitations and procedures established by the manufacturer of the article being inspected and must understand, speak and write the English language. Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station. Successfully replace failed sub-assembly, part, or component to bring failed device to working order Perform scripted repair procedure to repair and functionally test part or product Assist Repair technicians/Engineers/Technical Services as required Maintain constant adherence to inventory control practices and procedures Interpret OEM manuals and routers instructions Qualifications Required Powerplant License required Good written and verbal communication skills Knowledge of troubleshooting and repair of parts and concepts preferred Proficiency working with all hand tools and pneumatic tools essential Some knowledge of troubleshooting concepts Ability to isolate failures within and complete rework of parts and assemblies Ability to perform within company quality standard Ability to complete pre-defined testing and repair procedures Ability to learn and perform basic repairs Ability to read and understand routers and OEM manuals Language - English, business proficiency Experience with borescope Preferred CFM56 experience Quantum aviation software experience Language - Spanish, business proficiency If you are interested in the Detail Inspector job in Miami, Florida apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing; LLC are those of an Employment Agency

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Job DescriptionBenefits: Bonus based on performance Company parties Flexible schedule Free food & snacks Opportunity for advancement Training & development Job Overview Who we are... We are the #4 largest residential roofer in the US. We are a Platinum Preferred Owens Corning roofer. Only 1% of roofers have this title. We are the fastest-growing roofing company in the United States. #1 Roofer in the state of Arkansas by volume. #4 Largest residential roofer in the United States Moment of truth... Are you...... Are you ready for a life-changing opportunity with a company that rewards you for your hard work? Yes, that still exists. Are you tired of grinding in a cubicle with little room for advancement? Do you want to be in charge of your income? Do the words "Uncapped income potential" make your palms sweat? Do you like helping people and making their lives better while also creating financial freedom for yourself? Would you like to get something for someone and get someone else to pay for it? Insurance pays the bills here. If you said yes to any of these things, we'd like to talk to you----, do yourself a solid and check the box near the bottom that says "apply". Basic Requirements No experience necessary---we train you. This isn't a complicated job. Do you have reliable transportation? Are you self-motivated? Are you willing to climb a ladder onto a roof to inspect it? Are you willing to knock on a door to assist a homeowner with a storm damage claim? knock knock... We are hiring NOW. Apply and let's set up an interview. ***You are not installing roofs. I get that question frequently. We have the very best install teams. The production dept. handles install*** Job Type: Full-time Pay: $64,800.00 - $115,000.00 per year License/Certification: Driver's License (Required)

Inspectors are responsible for inspecting, testing, and maintaining fire sprinkler systems, fire pumps, and backflows with minimal supervision. Inspect, test, and maintain fire protection systems in accordance with NFPA codes with working knowledge of sprinkler controls, alarm panels, devices and critical components. Record and report deficiencies of fire protection systems to SFS and Customers. Communicate with internal and external customers as well as offsite monitoring companies in a professional manner. Proper use and operation of tools required to complete the inspection (heat and smoke detector kit, backflow kit, pump equipment) Plan, coordinate, and complete inspections as scheduled in a timely manner. Required to be in an on-call status as required by location to handle emergency service and inspection requests Ensure company provided vehicle is clean and well maintained as required by company policies. Ensure that all assigned tools are safeguarded and maintained. Understand and follow SFS's Safety program, SDS book, Hazardous communication program, policies and procedures. Participate in weekly Toolbox talks. Inspectors must know where all related safety documentation is at all times on each project. Attend seminars from time to time to stay abreast of changing technology, installation and testing approaches. Train inspector trainees in all applicable aspects of fire protection. Other duties may be assigned. QUALIFICATIONS: The qualifications listed below are representative of the elements required to perform the job successfully, however in some cases, an equivalent combination of Education, Training, Certifications and Experience may meet the job qualifications. Education, Training, Certifications: HS Diploma or equivalent, required. NICET and/or state required certification required based on location, preferred. Experience, Knowledge, Skill Requirements: 3-5 years' experience inspecting fire protection systems required. 5+ years' experience preferred. Must be able to work alone and as part of a team. Basic math skills, mechanical aptitude, problem solving skills, customer service skills, decision making skills, ability to multitask, ability to meet project schedules, ability to plan and organize, troubleshooting skills, and the ability to train other is required. Communication Skills: Must have the ability to effectively read, write and communicate in English with employees and customers. Systems and Software Skills: Ability to operate a computer, tablet and read electronic blueprints required. Experience with SalesForce and Microsoft Office is preferred. Other Qualifications: Valid driver's license with acceptable driving record required. Must be able to comply with SFS's Drug and Alcohol policy and Background screening requirements, which may also include customer specific requirements based on contractual agreement PHYSICAL & WORK ENVIRONMENT REQUIREMENTS: Reasonable accommodations may be made to enable individuals with disabilities to perform Essential Job Duties. Physical Requirements: While performing the duties of this job, the employee is frequently required to bend, ascend and descend step stools, ladders and stairs, kneel, lift 50lbs, sit, stoop, twist, and work at heights. Work Environment: Frequent local travel and occasional regional and non-regional travel is required. Employee will frequently be required to work inside and outside in hot/cold temperatures and be exposed to loud noises, cramped quarters, dust, fumes and odors, standing on hard surfaces, and electrical hazards frequently. Employees will occasionally be exposed to chemicals, moving machinery, uneven and slippery surfaces. Employee must consistently wear all appropriate personal protective equipment, as required by company safety policies. We are fully committed to equal opportunities for employment to all individuals regardless of race, national origin, gender, religion, sexual orientation, disability, familial status, and any other classification protected under the law. We are an Equal Opportunity, Affirmative Action employer. While this job description is intended to be an accurate reflection of the position, management reserves the right to modify, add, or remove duties and to assign other duties as necessary. #LI-RF1 #ZR

Inspectors are responsible for inspecting, testing, and maintaining fire sprinkler systems, fire pumps, and backflows with minimal supervision. * Inspect, test, and maintain fire protection systems in accordance with NFPA codes with working knowledge of sprinkler controls, alarm panels, devices and critical components. * Record and report deficiencies of fire protection systems to SFS and Customers. * Communicate with internal and external customers as well as offsite monitoring companies in a professional manner. * Proper use and operation of tools required to complete the inspection (heat and smoke detector kit, backflow kit, pump equipment) * Plan, coordinate, and complete inspections as scheduled in a timely manner. * Required to be in an on-call status as required by location to handle emergency service and inspection requests * Ensure company provided vehicle is clean and well maintained as required by company policies. * Ensure that all assigned tools are safeguarded and maintained. * Understand and follow SFS's Safety program, SDS book, Hazardous communication program, policies and procedures. Participate in weekly Toolbox talks. Inspectors must know where all related safety documentation is at all times on each project. * Attend seminars from time to time to stay abreast of changing technology, installation and testing approaches. * Train inspector trainees in all applicable aspects of fire protection. * Other duties may be assigned. QUALIFICATIONS: The qualifications listed below are representative of the elements required to perform the job successfully, however in some cases, an equivalent combination of Education, Training, Certifications and Experience may meet the job qualifications. Education, Training, Certifications: * HS Diploma or equivalent, required. * NICET and/or state required certification required based on location, preferred. Experience, Knowledge, Skill Requirements: * 3-5 years' experience inspecting fire protection systems required. 5+ years' experience preferred. * Must be able to work alone and as part of a team. Basic math skills, mechanical aptitude, problem solving skills, customer service skills, decision making skills, ability to multitask, ability to meet project schedules, ability to plan and organize, troubleshooting skills, and the ability to train other is required. Communication Skills: * Must have the ability to effectively read, write and communicate in English with employees and customers. Systems and Software Skills: * Ability to operate a computer, tablet and read electronic blueprints required. Experience with SalesForce and Microsoft Office is preferred. Other Qualifications: * Valid driver's license with acceptable driving record required. * Must be able to comply with SFS's Drug and Alcohol policy and Background screening requirements, which may also include customer specific requirements based on contractual agreement PHYSICAL & WORK ENVIRONMENT REQUIREMENTS: Reasonable accommodations may be made to enable individuals with disabilities to perform Essential Job Duties. Physical Requirements: While performing the duties of this job, the employee is frequently required to bend, ascend and descend step stools, ladders and stairs, kneel, lift 50lbs, sit, stoop, twist, and work at heights. Work Environment: Frequent local travel and occasional regional and non-regional travel is required. Employee will frequently be required to work inside and outside in hot/cold temperatures and be exposed to loud noises, cramped quarters, dust, fumes and odors, standing on hard surfaces, and electrical hazards frequently. Employees will occasionally be exposed to chemicals, moving machinery, uneven and slippery surfaces. Employee must consistently wear all appropriate personal protective equipment, as required by company safety policies. We are fully committed to equal opportunities for employment to all individuals regardless of race, national origin, gender, religion, sexual orientation, disability, familial status, and any other classification protected under the law. We are an Equal Opportunity, Affirmative Action employer. While this job description is intended to be an accurate reflection of the position, management reserves the right to modify, add, or remove duties and to assign other duties as necessary. #LI-RF1 #ZR Are you interested in working for the nation's leading fire protection company and beginning a rewarding and satisfying career that helps save the lives of thousands each year? Do you want to be a part of a growing and expanding team of industry experts? If so, exploring career opportunities with Summit Fire & Security may be right for you! Summit Fire & Security, a subsidiary of SFP Holding, Inc. (Summit Companies), is a full-service provider for fire detection, suppression, and security with a full suite of capabilities that includes design, installation, testing, inspections, and maintenance. We serve customers across many verticals on a local, regional, and national scale. We're proud of our well-deserved reputation for quality work that's completed by our talented and experienced installation workforce. Summit Fire & Security is a dynamic organization with endless growth opportunities spanning over 70 locations in more than 20 states. Our company is consistently recognized for service excellence in the fire protection industry. Summit Fire & Security supports trade skills and workforce development by hosting Recognized Apprenticeships and on-the-job training (OJT) programs for new career-seekers. Many members of our leadership chair NFPA code compliance committees, serve on regional safety boards, and support technical education in local schools. Summit Fire & Security supports employees in their professional development by offering continued development, training, and education by encouraging NICET and other career-advancing certifications. We offer reimbursement for certain career development programs in addition to potential bonuses for specific certifications. We continually strive to be the Employer of Choice for highly motivated team members who want to succeed in a high-growth environment. We encourage initiative, independence, diversity, and personal career growth. Demonstrating the combination of experience, knowledge, and customer service is the key to our performance and helps us achieve our goal of providing the highest quality fire protection services possible to protect lives and property. Benefits Summit Fire & Security offers extensive training opportunities, career advancement, competitive pay, bonus opportunities, along with an industry leading and affordable benefits package for eligible employees. Our benefits package includes: * Paid Vacation and Holidays * Medical Insurance * Dental Insurance * Vision Insurance * 401(k) Plan with Company Match * Flexible Spending Accounts * Long-Term Disability - Employer Paid * Short-Term Disability - Employer Paid * Additional Voluntary Ancillary Benefits such as Accident and Hospital Indemnity * Life Insurance for Team Members and Dependents * Employee Assistance Program * Employee Referral Program Our Core Values PIPE * We are PASSIONATE about life safety * We have INTEGRITY (Do the right thing) * We work in PARTNERSHIP with our customers and community * We constantly strive for OPERATIONAL EXCELLENCE (Do things right) Summit Fire & Security participates in E-Verify & in alignment with our commitment to safety, we promote a drug-free workplace. Summit Fire & Security is an equal-opportunity employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as a protected veteran, among other things, or status as a qualified individual with a disability.

22098499 County: Jefferson REQUIRES OVERNIGHT TRAVEL Hiring Official: John Engelhardt Job Summary: Performs inspections and audits of facilities, processes, and operational procedures. Identify potential risks, non-compliance issues, or areas where improvements can be made. Evaluate safety measures and quality control systems against internal policies, industry standards, and regulatory guidelines to ensure they meet or exceed required standards. Prepare detailed inspection and audit reports that clearly outline findings, identified risks, and recommendations for corrective actions. Maintain accurate records of inspections. Must have skills: Strong analytical and observational skills, with acute attention to detail in identifying discrepancies and potential risks. Excellent written and verbal communication skills for effectively preparing reports and collaborating with a variety of assorted personnel. Proficient in using modern inspection tools, data management software, and digital reporting systems. Ability to work independently, manage multiple assignments, and adapt to shifting regulatory or operational landscapes. The Department of Human Services is a place for people passionate about serving others and changing lives for the better. We care for Arkansans of all ages and ensure places like child care centers and nursing homes are safe. We are the safety net for the most vulnerable Arkansans. Whether you answer the phones, take applications, protect children, or help care for residents or patients at one of our facilities, you make a difference by working at DHS. Plus, working for the State has great perks, including a pension, maternity leave, paid state holidays, and much more. At DHS, we take care of our employees so you can help care for others. Position Information Job Series: Inspectors and Investigators - Inspectors Classification: Inspector II Class Code: IIN02P Pay Grade: SGS05 Salary Range: $47,397 - $70,148 Job Summary The Inspector II is a dedicated professional responsible for ensuring that an organization's operations, processes, and facilities conform to internal standards, industry regulations, and applicable safety or quality guidelines. This role is vital in identifying deficiencies, irregularities, and non-compliance issues across various areas, then recommending corrective measures that drive performance improvements and safeguard regulatory adherence. The Inspector II works closely with management and operational teams in an attempt to establish a culture of continuous quality assurance and risk mitigation, playing a key role in enhancing organizational efficiency and protecting reputations. Primary Responsibilities Perform scheduled and unscheduled inspections and audits of facilities, processes, and operational procedures. Identify potential risks, non-compliance issues, or areas where improvements can be made. Compare current practices against internal policies, industry standards, and regulatory guidelines. Evaluate safety measures, quality control systems, and workflow processes to ensure they meet or exceed required standards. Prepare detailed inspection and audit reports that clearly outline findings, identified risks, and recommendations for corrective actions. Maintain accurate records of inspections, corrective measures implemented, and follow-up evaluations. Work with department heads and management to discuss inspection outcomes and develop action plans for addressing areas of concern. Provide guidance and training to personnel on compliance best practices, updated standards, and procedural improvements. Oversee the implementation of recommended improvements and track their effectiveness over time. Conduct follow-up inspections to ensure that corrective actions have been successfully executed. Continuously update your knowledge of evolving regulatory requirements, new industry standards, and technological advancements that may impact inspection practices. Proactively suggest adjustments to inspection protocols as necessary to maintain state-of-the-art quality management. Knowledge and Skills Strong analytical and observational skills, with acute attention to detail in identifying discrepancies and potential risks. Excellent written and verbal communication skills for effectively preparing reports and collaborating with a variety of assorted personnel. Proficient in using modern inspection tools, data management software, and digital reporting systems. Ability to work independently, manage multiple assignments, and adapt to shifting regulatory or operational landscapes. Minimum Qualifications High School Diploma or GED. Minimum of 4 years of hands-on experience in inspections, quality control, internal auditing, or compliance roles. Licensure/Certifications Must possess a valid Arkansas driver's license. OTHER JOB RELATED EDUCATION AND/OR EXPERIENCE MAY BE SUBSTITUTED FOR ALL OR PART OF THESE BASIC REQUIREMENTS, EXCEPT FOR CERTIFICATION OR LICENSURE REQUIREMENTS, UPON APPROVAL OF THE QUALIFICATIONS REVIEW COMMITTEE. The State of Arkansas is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, citizenship, national origin, genetic information, military or veteran status, or any other status or characteristic protected by law. Nearest Major Market: Little Rock Nearest Secondary Market: Pine Bluff

Under direct supervision, performs incoming, first piece, in-progress and / or final inspection on assembled products, using customer prints / specifications. Inspections may include inspection of materials, parts and complete switchboards for compliance with engineering, manufacturing, and quality specifications. Assure non-conforming product and processes are identified and documented with an AS9100 Quality Management System. Key Competencies: Thoroughness, Technical Capability, Problem Solving / Analysis, Organizational Skills, Personal Effectiveness / Credibility, Detail Oriented. Good communication skills, Ability to multi-task. Good Time - Perform workmanship, visual, and mechanical inspections. Perform assigned QA product and process audits. Input to and maintain QA inspection databases. May investigate and determine cause of defective parts, units or processes. May assist with final assembly audits and inventory audits as requested. Responds to requests for assistancee with quality issues and problems. Ensure quality control, approving product conformity. Initiates disposition of rejected materials, parts, or devices. Troubleshoots electrical jobs. Interface with Customer and Government Quality Representatives. May perform routine analyses and calculations using general knowledge or mathematics and statistics. Train and coach production employees. EEO/AA Quantic BEI is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. We participate in EVerify. EEO Poster in English EEO Poster in Spanish U.S. EXPORT CONTROLS As a U.S. defense manufacturer, Quantic BEI is required to safeguard U.S. defense-related and other export-controlled articles, technologies, and services from unauthorized access, export, or re-export. The transfer of U.S. export-controlled articles, technologies, or services (including manufacturing processes) to individuals or entities that do not qualify as "U.S. persons," as defined by 22 CFR 120.62, is prohibited without prior authorization from the appropriate U.S. government agencies, such as the Department of State's Directorate of Defense Trade Controls (DDTC). Under 22 CFR 120.62, a "U.S. person" is defined as a lawful permanent resident as per 8 U.S.C. 1101(a)(20), or a protected individual under 8 U.S.C. 1324b(a)(3). It also includes any corporation, business association, partnership, society, trust, or other entity that is incorporated to do business in the United States, as well as governmental entities at the federal, state, or local levels. It does not include foreign persons as defined in § 120.63. To ensure compliance with U.S. export control regulations, candidates for this position are required to undergo an Export Compliance Assessment. As part of this process, candidates may be asked to provide documentation verifying their status as "U.S. persons" or "foreign persons," in accordance with U.S. regulation, to determine whether prior authorization is required to perform specific job duties related to this position. Requirements Requires High School education or GED. Some college / University classes a bonus. 1 to 3 years of Manufacturing, Engineering, Quality Control or related field. Knowledge able and skilled in use of standard mechanical and electrical instruments / functional gages / rigs / hand-eye coordination. Ability to read engineering drawings / blueprints / etc.

Under direct supervision, performs incoming, first piece, in-progress and / or final inspection on assembled products, using customer prints / specifications. Inspections may include inspection of materials, parts and complete switchboards for compliance with engineering, manufacturing, and quality specifications. Assure non-conforming product and processes are identified and documented with an AS9100 Quality Management System. Key Competencies: Thoroughness, Technical Capability, Problem Solving / Analysis, Organizational Skills, Personal Effectiveness / Credibility, Detail Oriented. Good communication skills, Ability to multi-task. Good Time - Perform workmanship, visual, and mechanical inspections. Perform assigned QA product and process audits. Input to and maintain QA inspection databases. May investigate and determine cause of defective parts, units or processes. May assist with final assembly audits and inventory audits as requested. Responds to requests for assistancee with quality issues and problems. Ensure quality control, approving product conformity. Initiates disposition of rejected materials, parts, or devices. Troubleshoots electrical jobs. Interface with Customer and Government Quality Representatives. May perform routine analyses and calculations using general knowledge or mathematics and statistics. Train and coach production employees. EEO/AA Quantic BEI is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. We participate in EVerify. EEO Poster in English EEO Poster in Spanish U.S. EXPORT CONTROLS As a U.S. defense manufacturer, Quantic BEI is required to safeguard U.S. defense-related and other export-controlled articles, technologies, and services from unauthorized access, export, or re-export. The transfer of U.S. export-controlled articles, technologies, or services (including manufacturing processes) to individuals or entities that do not qualify as “U.S. persons,” as defined by 22 CFR 120.62, is prohibited without prior authorization from the appropriate U.S. government agencies, such as the Department of State's Directorate of Defense Trade Controls (DDTC). Under 22 CFR 120.62, a “U.S. person” is defined as a lawful permanent resident as per 8 U.S.C. 1101(a)(20), or a protected individual under 8 U.S.C. 1324b(a)(3). It also includes any corporation, business association, partnership, society, trust, or other entity that is incorporated to do business in the United States, as well as governmental entities at the federal, state, or local levels. It does not include foreign persons as defined in § 120.63. To ensure compliance with U.S. export control regulations, candidates for this position are required to undergo an Export Compliance Assessment. As part of this process, candidates may be asked to provide documentation verifying their status as “U.S. persons” or “foreign persons,” in accordance with U.S. regulation, to determine whether prior authorization is required to perform specific job duties related to this position. Requirements Requires High School education or GED. Some college / University classes a bonus. 1 to 3 years of Manufacturing, Engineering, Quality Control or related field. Knowledge able and skilled in use of standard mechanical and electrical instruments / functional gages / rigs / hand-eye coordination. Ability to read engineering drawings / blueprints / etc.

Job DescriptionDescription: Under direct supervision, performs incoming, first piece, in-progress and / or final inspection on assembled products, using customer prints / specifications. Inspections may include inspection of materials, parts and complete switchboards for compliance with engineering, manufacturing, and quality specifications. Assure non-conforming product and processes are identified and documented with an AS9100 Quality Management System. Key Competencies: Thoroughness, Technical Capability, Problem Solving / Analysis, Organizational Skills, Personal Effectiveness / Credibility, Detail Oriented. Good communication skills, Ability to multi-task. Good Time - Perform workmanship, visual, and mechanical inspections. Perform assigned QA product and process audits. Input to and maintain QA inspection databases. May investigate and determine cause of defective parts, units or processes. May assist with final assembly audits and inventory audits as requested. Responds to requests for assistancee with quality issues and problems. Ensure quality control, approving product conformity. Initiates disposition of rejected materials, parts, or devices. Troubleshoots electrical jobs. Interface with Customer and Government Quality Representatives. May perform routine analyses and calculations using general knowledge or mathematics and statistics. Train and coach production employees. EEO/AA Quantic BEI is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. We participate in EVerify. EEO Poster in English EEO Poster in Spanish U.S. EXPORT CONTROLS As a U.S. defense manufacturer, Quantic BEI is required to safeguard U.S. defense-related and other export-controlled articles, technologies, and services from unauthorized access, export, or re-export. The transfer of U.S. export-controlled articles, technologies, or services (including manufacturing processes) to individuals or entities that do not qualify as “U.S. persons,” as defined by 22 CFR 120.62, is prohibited without prior authorization from the appropriate U.S. government agencies, such as the Department of State's Directorate of Defense Trade Controls (DDTC). Under 22 CFR 120.62, a “U.S. person” is defined as a lawful permanent resident as per 8 U.S.C. 1101(a)(20), or a protected individual under 8 U.S.C. 1324b(a)(3). It also includes any corporation, business association, partnership, society, trust, or other entity that is incorporated to do business in the United States, as well as governmental entities at the federal, state, or local levels. It does not include foreign persons as defined in § 120.63. To ensure compliance with U.S. export control regulations, candidates for this position are required to undergo an Export Compliance Assessment. As part of this process, candidates may be asked to provide documentation verifying their status as “U.S. persons” or “foreign persons,” in accordance with U.S. regulation, to determine whether prior authorization is required to perform specific job duties related to this position. Requirements: Requires High School education or GED. Some college / University classes a bonus. 1 to 3 years of Manufacturing, Engineering, Quality Control or related field. Knowledge able and skilled in use of standard mechanical and electrical instruments / functional gages / rigs / hand-eye coordination. Ability to read engineering drawings / blueprints / etc.

America's Car-Mart 📍 🕒 Job Type: Full-Time 💼 Industry: Vehicle Reconditioning / Fleet Operations / Inventory Management Join a Company That Puts People First At America's Car-Mart, we're not just about selling vehicles-we're about building relationships and delivering value to our customers and communities. We're looking for a Quality Control Inspector who shares our passion for precision, affordability, and doing things right the first time. 🚗 What You'll Do Calling all detail-driven researchers! Are you someone who loves digging deep to find the perfect solution? We're looking for a Parts/Researcher Coordinator who thrives on uncovering the best parts at unbeatable prices and ensuring they arrive right on time. If you're passionate about research, coordination, and love the thrill of getting things right-this is the perfect fit. Apply today and turn your passion for research into a rewarding career! 🔧 Key Responsibilities Source and order parts for vehicle reconditioning across multiple locations Research and compare vendors to find the best pricing and availability Track shipments and ensure timely delivery to meet reconditioning deadlines Maintain accurate inventory records and cost tracking Collaborate with service teams to align parts availability with workflow Analyze purchasing trends and identify cost-saving opportunities Build and maintain strong vendor relationships 🎯 What You Bring Experience in parts coordination, procurement, or vendor research (automotive or fleet preferred) Strong attention to detail and organizational skills Excellent communication and negotiation abilities Proficiency with spreadsheets, inventory software, and online sourcing tools A proactive mindset and a passion for problem-solving 💰 Compensation & Benefits Base pay: $18-$22/hour, depending on experience Monthly performance bonus based on cost savings, sourcing efficiency, and inventory accuracy Health, dental, and vision insurance Paid time off and holidays Career growth opportunities within a growing company A supportive, people-first culture Apply now on Indeed and become part of the Car-Mart family-where your work drives real impact in Hot Springs and beyond. Employment is contingent upon your pre-employment background review, drug test, satisfactory MVR, and any state or local requirements for necessary licensure, as applicable #LOT1

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Arkansas, Crittenden, Cross, Lee, Monroe, Phillips, Prairie, Saint Francis, Woodruff Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Are you in search of a flexible work schedule? Are you interested in earning additional income with potential for growth? Do you prefer working outdoors rather than confined to an office or warehouse? requires travel from location to location. Quiktrak is looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories or property condition assessments. When you partner with Quiktrak, you are collaborating with experienced professionals dedicated to delivering exceptional customer experiences since 1991. Over the years, we have expanded our business to become one of the industry's largest players, offering floorplan audits, data collection, inspection services, and business growth opportunities for our contractors. For more information, please visit our website: Inspecting the world one asset at a time. | Quiktrak, LLC Our most successful Inspectors share common traits such as resourcefulness, discipline, a strong work ethic, meticulous and the ability to persevere through challenges. If this description resonates with you, we encourage you to apply today. Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfortable working outdoors in various weather conditions Access to a recent smartphone or tablet to execute jobs while on site. Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Capability to stand and walk continuously for up to seven and a half hours Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours. License/Certification: Driver's License (Required) "United States Applicants Only"

Commercial Independent Contractor for Insurance Loss Control. The physical characteristics, exterior measurements, general conditions, photographs, unusual hazards, and recommendations associated with a property are part of our comprehensive reports that summarize the observable hazards associated with a risk. The above information is used by our client companies to determine whether a risk meets the carrier's eligibility requirements. Inspectors are the "eyes" for the insurance underwriter, who is generally in another area and confined to an office. Inspectors set their own hours and work schedules in which they organize to accommodate the needs of our clients. Insurance Inspector Independent Contractor Qualifications: Be an energetic individual capable of completing a high volume of insurance inspections. Be motivated, analytical, resourceful, decisive, and have good problem-solving skills. Have solid written, composition and verbal communication skills. Have a strong desire to succeed and work independently with limited direction & guidance. Be self-disciplined, organized, and able to manage an aggressive workload and have the ability to prioritize and schedule inspections timely and efficiently. Not necessary but a plus: VIITA Certification, previous experience in construction/plumbing/electrical industries, life safety/firefighting, general contracting, or property management. Insurance Inspector Technical Requirements: A Microsoft Windows based PC Windows 10 Google Chrome or Edge and Microsoft Internet Explorer 11 Adobe Acrobat Reader Broadband internet connection Digital camera or smart phone capable of interfacing with your PC Color inkjet or laser printer Reliable, insured transportation and valid driver's license A measuring wheel, monopod, and a clipboard. If you meet the above criteria, please submit your resume, accompanied by a short, but precise, cover letter explaining why you feel you are suited for this position. Candidates are subject to criminal background checks. If you meet our qualifications, you will be contacted immediately.

Responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES * Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * Adheres to general work and safety requirements. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records, and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. QUALIFICATIONS * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. * Minimum 5 years' experience working on our Falcon models. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills. * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training * Performs duties as assigned.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

22094678 County: Conway; Searcy; Van Buren Livestock Hiring Authority 1 Natural Resources Drive Little Rock, AR 72205 Phone: ************ Email: ************************************** As the largest industry in Arkansas, the Arkansas Department of Agriculture is dedicated to the development and implementation of policies and programs for Arkansas agriculture and forestry to keep its farmers and ranchers competitive in national and international markets while ensuring safe food, fiber, and forest products for the citizens of the state and nation. The Department is organized into five Divisions: Forestry Division, Livestock and Poultry Division, Natural Resources Division, Plant Industries Division, and Shared Services Division. Position Information Job Series: Inspectors and Investigators - Inspectors Classification: Inspector I Class Code: IIN01P Pay Grade: SGS04 Salary Range: $43,088 - $63,770 Job Summary The Inspector I is a junior professional responsible for conducting routine inspections and evaluations to ensure that facilities, projects, or operational procedures adhere to established internal standards and regulatory guidelines. Under close supervision, this role serves as a foundational position in quality assurance and safety management. The Inspector I gathers and documents critical information, identifies potential risks or nonconformities, and supports more experienced inspectors and management teams in upholding compliance, safety, and quality within the organization. Primary Responsibilities Perform scheduled and unscheduled inspections of facilities, equipment, or projects to ensure adherence to established codes, standards, and safety regulations. Utilize pre-determined standardized checklists and inspection protocols to document findings accurately. Prepare clear and concise inspection reports outlining observations, discrepancies, and recommended corrective actions. Maintain accurate records of inspection activities and follow up on pending issues. Work under the supervision of senior inspectors or quality assurance managers, assisting in coordinating and prioritizing inspection tasks. Communicate effectively with team members and departments to relay inspection results and support corrective initiatives. Follow established guidelines and protocols to ensure a safe and compliant work environment. Demonstrate a commitment to learning and applying industry-specific standards and best practices. Participate in on-the-job training sessions to develop a deeper understanding of inspection techniques and regulatory requirements. Stay informed about emerging practices, tools, or technologies that can enhance inspection accuracy and efficiency. Knowledge and Skills Acute attention to detail and strong observational skills. Basic computer skills, including familiarity with data entry and reporting software. Effective verbal and written communication skills for clear documentation and collaboration. A proactive attitude and willingness to learn from experienced professionals. Minimum Qualifications High School Diploma or GED. This role is designed as a learning opportunity, with structured training provided to develop technical proficiency and practical knowledge over time. Licensure/Certifications Must possess a valid Arkansas driver's license. OTHER JOB RELATED EDUCATION AND/OR EXPERIENCE MAY BE SUBSTITUTED FOR ALL OR PART OF THESE BASIC REQUIREMENTS, EXCEPT FOR CERTIFICATION OR LICENSURE REQUIREMENTS, UPON APPROVAL OF THE QUALIFICATIONS REVIEW COMMITTEE. The State of Arkansas is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, citizenship, national origin, genetic information, military or veteran status, or any other status or characteristic protected by law. Preferred Qualifications: * Experience and knowledge of handling animals and animal husbandry practices. * Experience with livestock markets and sales. * Experience with exhibiting animals. * Experience working with veterinarians. * Understands the livestock and poultry industry on a state and national level. * Ability to use Microsoft office, web-based programs, and a smart phone. * Ability to prepare and compile data and reports. * Ability to communicate effectively in writing and verbally. * FEMA Incident Command Training. Nearest Major Market: Little Rock

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Conway, Faulkner, Grant, Jefferson, Lonoke, Perry, Pulaski, Saline, White Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position