Inspector jobs in Livermore, CA - 322 jobs

Quality Inspector 1 - 3091 Job Title Quality Control Inspector The Quality Control Inspector is responsible for ensuring that products meet established quality standards through detailed inspections of in-process and finished goods. This role involves interpreting technical documentation, using precision measurement tools, identifying and documenting non-conformances, and updating ERP systems to manage suspect items. Inspectors perform first-piece and receiving inspections, monitor gauge calibration, and maintain accurate records to support traceability. They also uphold safety and compliance policies and assist with various quality-related tasks including sorting, testing, and cross-functional support. Job Duties Perform detailed inspections of in-process and finished goods to ensure adherence to work instructions and established quality standards. Identify, document, and address non-conformances through rework or rejection protocols. Detect and communicate discrepancies or errors in documentation, drawings, or specifications that could impact product quality, ensuring timely feedback and escalation to appropriate personnel. Apply visual indicators and update the ERP system to identify and isolate suspect or non-conforming items, preventing unintended use or shipment until resolution. Operate and interpret results from gauging tools such as calipers, micrometers, height gauges, force gages and micro ohm meters to verify product dimensions and tolerances with accuracy and consistency Read and understand engineering drawings, blueprints, control plans, and inspection procedures to guide quality assessment. Perform first-piece inspections on production runs to validate that initial outputs meet all required specifications before full-scale manufacturing proceeds. Support receiving inspection when required. Identification of damaged or out of calibration gages. Record inspection data on check sheets or in digital systems, ensuring all forms, reports, and logs are completed with precision and attention to detail to maintain traceability and compliance. Comply with all safety, environmental, and quality assurance policies and procedures to support a safe and compliant work environment. Assist with other quality-related activities as assigned, including quality sorting, product testing, and cross-functional support tasks. Experience and Education Prior experience in quality inspection within a manufacturing or production environment. Associate degree preferred; equivalent technical training or relevant work experience may be considered. Proficient in computer use, including Microsoft Office applications and navigating web-based document control systems. Competencies/Skills Proficient in reading and understanding work instructions, test methods, control plans, and other quality-related documentation. Demonstrates solid basic math skills for measurement, calculation, and data verification tasks. Skilled in using standard inspection tools such as tape measures, calipers, micrometers, and other basic gauges. Comfortable working with computers, including entering and managing data in spreadsheets, databases, or quality systems. Capable of reading and interpreting engineering drawings and blueprints to support inspection and quality control processes. Hourly range: $21 - $23

About Applied Aerospace: Join the team that builds for the best. At Applied Aerospace, we design, fabricate, and test mission-critical aerospace components for leading innovators like SpaceX, NASA, Northrop Grumman, and Boeing. Every part we create reflects our relentless commitment to quality, reliability, and performance. Through precision engineering and purpose-driven innovation, we're helping take aerospace technology to new heights - and we're looking for talented individuals who want to be part of that journey. OVERVIEW OF POSITION: Our company is currently seeking a dedicated and detail-oriented Quality Inspector to join our team. As a Quality Inspector, you will be responsible for conducting in-process inspections using hand inspection tools such as micrometers, calipers, height gauges, and other measurement equipment. Your primary role will be to ensure that our products meet the highest quality standards before they move forward in the production process. ESSENTIAL JOB FUNCTIONS: * Perform in-process inspections using various hand inspection tools, including micrometers, calipers, height gauges, etc. * Follow work instructions and inspection guidelines to accurately assess product quality. * Pay meticulous attention to detail, identifying any defects, deviations, or non-conformances during inspections. * Read and interpret Mylar's and blueprints to verify product dimensions and specifications. * Collaborate with production teams to address and resolve any quality issues that may arise. * Assist in reporting non-conformances and documenting inspection results accurately. * Continuously learn and adapt to new inspection techniques, tools, and technologies. * Maintain a clean and organized work area. * Perform thorough examinations of all materials and finished products. * Implement and improve quality control operating procedures. * Identify and troubleshoot equipment problems and defects. * Other job duties as assigned. GENERAL: * Associate level should have 2-5 years' experience in Quality. * General level should have a total of 5+ years' experience in Quality. * Senior level should have a total of 10+ years' experience in Quality. * High school diploma or equivalent. * Proven experience as a Quality Inspector or in a similar role, preferably in a manufacturing environment. * Proficient in using hand inspection tools such as micrometers, calipers, height gauges, and other measurement equipment. * Excellent attention to detail and ability to identify defects and non-conformances. * Strong communication skills and ability to collaborate effectively with cross-functional teams. * Familiarity with quality control processes and standards. * Basic computer skills for documenting inspection results. * Ability to work independently and prioritize tasks effectively. * Willingness to learn and adapt to new technologies and inspection methods * Strong attention to detail. * Strong analytical and critical thinking skills. * Excellent written and verbal communication skills. * Previous experience in a manufacturing or production environment. * Knowledge of quality management systems. * Familiarity with ISO standards. * Ability to read and interpret Mylar's and blueprints. * Experience with non-conformance reporting. This job description is not intended to be all-inclusive. Employees may perform other related duties as assigned to meet the ongoing needs of the Company. Applied Aerospace is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Applied Aerospace is committed to working with and providing reasonable accommodation to individuals with disabilities or individuals who may need religious or medical accommodation. If you need accommodation because of a disability, medical, or religious reason for any part of the employment process you can notify the Human Resources Department, and your request will be reviewed.

Job Description Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Duties & Responsibilities: Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part may evaluate new procedures for non-standard rest and perform special set-up on new equipment assist others in correcting or preventing deficiencies in quality or workmanship give work direction to other inspectors know your customers expectations and drive action to meet them perform first article process identify component perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality Required skill: PCBA Experienced Able to use measurement equipment. Must be able to read ECO/Dev instruction/build drawer and BOM. Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: Attention to detail Communication skills - verbal and written Organizing Judgement Data collection, management and analysis Team work Ability to interpret complex customer rules and regulations Demonstrated skills in project management and ability to train others to lead projects Works well independently Excellent interpersonal and communication skills Ability to mange time and prioritize multiple task in a fast paced environment Proficient in use of MS Office applications, MS Project, Outlook May require international travel and international business experience Knowledge of Lean manufacturing fundamentals

Job Description Therm-x of California is the leading manufacturer for Advanced Temperature and Control Systems for Hi-Technology industries. We have been in business for over 30 years and have a diverse customer base. We offer competitive pay, and a comprehensive benefits package. The Quality Control Inspector will perform basic visual inspection by using devices. Be able to record inspection data onto inspection form. Perform incoming inspection of parts which may include activities such as PO verification using ERP system. Technical Requirements: Perform in-process and final inspections for mechanical as well as assembly parts. Support machine shop QA function. Read product drawings and specifications. Utilize MS Office Suite applications including Word, Excel & Access. Work with quality and production personnel. Education and Training: Use basic mechanical hand tools such as Caliper and micrometer and torque screw drivers. Electrical devices such as Digital Multi-Meters, Ohmmeters. Basic proficiency in MS Office Suite applications including Word, Excel & Access Data Base and outlook Read and interpret Blue Prints. Intermediate math skills. Basic understanding of GD &T Basic CMM operation experience Physical Demands: While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must occasionally lift and/or move up to 50 pounds.

Job Description Process non-standard requests, initiate appropriate documentation and notify Building Manager and/or coordinate with outside agencies as needed. Work closely with custodial team and Building Manager to identify deficiencies and make recommendations to remedy problems. Perform facility inspections on a routine basis. Accountable for key control and assets provided. Identify maintenance needs throughout assigned buildings (i.e. safety concerns, missing furniture, etc.) Enter corrective work orders to rectify any maintenance issues that are found during building inspections. Damage billing assessment and compilation. Gather and manipulate data via Excel. Provide thorough photo documentation for damage billing process. Assist with special facility related projects as deemed necessary by Building Manager. Ability to interface appropriately with colleagues and outside vendor groups. Qualifications Knowledge, Skills and Abilities: Demonstrates excellent problem solving and decision-making skills to effectively solve and respond to complicated requests. Excellent customer service experience and a proven ability to meet performance standards. Ability to work in a dynamic environment with potential for shifting priorities. Excellent attention to detail and accuracy. Ability to use authority, knowledge and judgment to respond effectively to complicated requests. Ability to multi task. Ability to learn policies and procedures and correctly provide that information to customers and use information to make sound decisions. MS Word and Excel experience Excellent customer service, both in written and oral communication. Correct attire for job function, presentable at all times. Physical Requirements: Frequently stand/walk, sit, perform desk-based computer tasks, use a telephone, and grasp lightly/fine manipulation. Writing by hand, sort/file paperwork. Rarely kneel/crawl. - Consistent with its obligations under the law, the University will provide reasonable accommodation to any employee with a disability who requires accommodation to perform the essential functions of his or her job. Working Conditions: May work extended hours Work Standards: Interpersonal Skills: Demonstrates the ability to work well with colleagues and clients and with external organizations. Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for safety; communicates safety concerns; uses and promotes safe behaviors based on training and lessons learned. Education & Experience: HS diploma or GED and at least 1 year of experience in an educational or facilities environment. This is the pay range that RightSourcing (a part of Magnit) reasonably expects to pay someone for this position, however, as a supplier your expected pay range may vary and/or include certain benefits like: Medical, Dental, Vision, 401K. They may be required/asked to drive an electric golf cart. So they must have a valid drivers license as well as take an online Golf Cart Training course once they are hired. Driving will be required less than 10% Schedule: Varies - must be flexible

What you'll do * Program and operate CMMs using CALYPSO, PC-DMIS or Metrologic software to create measurement routines. * Lead the establishment of an aircraft inspection plan including the programming of CMMs, laser trackers and other inspection tools * Interpret engineering drawings and translate them into CMM programs and inspection plans * Perform inspections of parts and assemblies to ensure compliance with design tolerances and specifications. * Record and maintain accurate inspection data and reports to support statistical process analysis * Regularly inspect and maintain CMM machines to ensure accuracy and reliability * Ensure the CMM maintains calibration * Troubleshoot and resolve CMM-related issues as they arise * Ensure traceability of measurements and maintain compliance with company quality management systems What you need * High School Diploma or equivalent required * 3+ years' experience in metrology with programming skills in CALYPSO, Polyworks, PC-DMIS, or Metrologic and hands on experience using with CMMs, Laser Trackers, scanners or arms * Proficiency in reading and interpreting engineering drawings and geometric dimensioning and tolerancing (GD&T) * Experience creating and approving first article inspections with working knowledge of the tools required for inspection * Ability to identify/recognize inspection errors and nonconformances and initiate corrective action * Experience with MES systems and creating inspection plans electronically * Experience working in a manufacturing environment in aerospace or other highly regulated environments * Ability to work within a team environment Bonus qualifications * Associate degree or technical certification in Quality Assurance, Mechanical Engineering, or a related field * Experience creating real time dashboards using Sigma * Experience with developing/validating automated inspection equipment in a manufacturing environment including working with SQL languages * Experience with SAP At Archer, we aim to attract, retain, and motivate talent with the skills and leadership needed to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company's strategy. For this position, we are targeting a base pay range of $52,300 - $71,900. Actual compensation offered will be determined by job-related knowledge, skills, and experience. Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer's People Team at *****************. Reasonable accommodations will be determined on a case-by-case basis.

The Quality Control Inspector is responsible for verifying that products manufactured by Sierra Circuits, Inc. meet the requirements of our customers using various inspection tools and inspection methods. KEY RESPONSIBILITIES: QC Inspector Visual inspection under magnification on printed circuit boards. Identify quality defects to conformance specs and complete reject report (NCMR). Obtain FAI report and packaging requirements before moving the order to shipping. Maintain clean and orderly workspace. Perform final count of acceptable parts and sign the traveler. Complete first article report / or AS91002 report. Other duties as assigned. QUALIFICATIONS - KNOWLEDGE/SKILLS- EXPERIENCE: Excellent oral and written communication skills. Exceptional multi-tasking, organizational skills, strong attention to detail and accuracy. Strong interpersonal skills and ability to work with all levels of management Self-motivator and a sense of ownership and urgency. Must be able to maintain confidentiality & professionalism at all times. Proficient in Microsoft Office, using Excel, PowerPoint, and Word required. Read, write and communicate in English. Basic arithmetic in reference to instructions where interpretations are required. Ability to visually verify fine detail work. Ability to understand and follow directions when inspecting printed circuit boards. Basic understanding of prints and specifications, ability to complete FAI reports and communicate via email with customer inquiries. Moderate physical lifting of up to 20-Ibs Some out-of-department in-process inspection. SUPERVISES: None PHYSICAL DEMANDS: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently stand, walk, and reach with hands and arms. The ability to lift 20-40 lbs., open filing cabinets, and bend, stand, or climb on step ladders as necessary. ENVIRONMENT: Office and Manufacturing - Comply with safety and protective equipment as required. California Hourly Salary range from $20.00 - $26.00 with Benefits and Perks. Day Shift and Night Shift

The NDT Advanced Services API 653 Inspector is responsible for performing inspections in accordance with API standards designated equipment for purposes of recommending and approving repairs or certifying compliance. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values and Seven Critical Choices. * Performs internal and external inspections on equipment at scheduled intervals to maintain the mechanical integrity of fixed equipment. * Recommends and approves repairs as well as performs visual inspection of completed repair work. * Assists in scheduling activities related to inspection. * Writes detailed inspection and turnaround reports and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate and deal with customers and other parties in such a manner as to benefit the professional reputation of the company. This communication is in person at the plant / job site. * Complete all required training, including tests, within Company guidelines. * Perform necessary filing of customer and company job related forms and paperwork. Job Qualifications * High school diploma or equivalent preferred. * Technical school or other related training preferred. * Previous industry related experience preferred. * Must possess valid API 653 certification. * Must possess valid Driver's License. * Travel requirement: 30% - 75%. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis. * Candidate must be capable of climbing, working at high elevations and working in confined spaces. Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively. * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills. Additional Job Description Anticipated compensation for this role is $90,000.00 - $150,000.00 per year plus benefits. Note: Disclosure as required by Cal. Lab. Code § 432.3 of the pay range for this role when being hired into our locations in California. Team reserves the right to pay more or less than the pasted range. Actual compensation will be based on experience, qualifications, and geography.

Job Description Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: Onsite Hourly Range: Salary Range: $22.00 - $25.00, DOE Shift: Grave Additional Compensation: 15% shift differential Location: Milpitas, CA Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. VISION To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. MISSION To create value, profitably grow, and share our success with all stakeholders. CULTURE Respect - We treat others the way they want to be treated. Integrity - We practice a high standard of ethics in our business dealings with customers, suppliers, and employees. Responsiveness - We have a sense of urgency in responding to internal and external requests and work proactively to solve problems. Excellence/Competence - We empower our people to continuously improve and execute high quality work. Teamwork - We work together to achieve Fralock business objectives by communicating at an elevated level, by listening and having clarity in our expectations of one another. Individual Accountability and Personal Responsibility - We do what we have committed to do when we committed to doing it. Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Job Summary Final inspection of printed circuit boards (PCB) assemblies with or without Microscope, Halo Light, or similar magnification tool. Works under close supervision. The responsibility of Quality Inspector shall be to support manufacturing to achieve customer Quality and Delivery requirements according to specifications Key Responsibilities Read and interpret blueprints and PCB drawing / schematics to ensure quality products. Workmanship and Inspection to IPC-600 (or similar) standards Ensure PCB assemblies are built and compliant to specifications, customer drawings and/or BOM. Inspectors will ensure the drawings are adequate to use and that any red lining have the appropriate authorization and approvals with date. Maintains a clean and safe working environment in line with company policy. Execute in-line quality protocols, final QC processes, and IQC procedures Follow production priorities as established by the Head of Operations and /or Production Manager. Inspect and test products per assigned work order (WO) and/or special instructions. Perform First Article may include AS9102 documentation. Follow all company and departmental processes and procedures Willing to be trained on the following areas: inspection techniques, quality methodologies, and use of inspection apparatus Required Skills This is an ITAR facility and applicant must hold U.S. Citizenship or Permanent Resident status per ITAR contract requirements Knowledge in manufacturing flex and rigid flex printed circuit boards Ability to read, write and communicate in English to the degree necessary to perform the job Knowledge in understanding prints and specifications Ability to visually verify fine detail work Ability to understand and follow directions regarding manufacturing flexible printed circuit boards Prolonged viewing of small parts via microscopes and sitting. Use of personal protective equipment (smock, gloves, closed toed shoes etc.) Experience Requirements 0-1-year experience of printed circuit board manufacturing environment Consistently achieve defined productivity level on all products processed; run product independently for a period of at least three months. Proven record of quality, on time production run. Keen eye for detail. Read and interpret documents such as safety rules, operating machine maintenance, and instruction and/or procedure manuals. Positive attitude, reliable, and a team player. Must maintain confidentiality of work-related information and materials. Education Requirements High School Diploma Physical Requirements Mostly sitting Coordinating & Prioritizing Multitasking Communicating with internal teams All offers of employment at Fralock are contingent upon clear results of a background check. Background checks may include some or all the following depending on job title and responsibilities: Social Security Verification Prior Employment Verification Criminal History Personal and Professional References Motor Vehicle Records (only if applicable with position) Credit History (only if applicable for the position) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of a position. Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Position: Quality Inspector 3Job Type: Contract-to-Hire Compensation: $20-23/hr OverviewWe are seeking a QC Inspector 3 to support inspection activities for electrical switchgear cabinets in a manufacturing environment. This role is primarily focused on visual inspection, with some mechanical quality checks, and requires a basic understanding of electrical schematics. This is a great opportunity for quality professionals looking for steady first-shift hours and long-term potential. Key Responsibilities Perform visual inspections of electrical switchgear cabinets to ensure workmanship and quality standards Conduct basic mechanical quality inspections on assembled components Review work instructions, drawings, and basic electrical schematics to verify product conformance Ensure all required manufacturing and inspection steps have been completed prior to product release Identify, document, and report non-conforming material Communicate quality issues to production and quality teams Accurately document inspection results in quality systems or logs Follow all safety, quality, and inspection procedures Qualifications High school diploma or equivalent 1+ year of quality inspection or manufacturing experience Strong attention to detail with a focus on visual inspection Basic ability to read and understand schematics or drawings Comfortable working in a manufacturing environment Ability to work independently with minimal supervision qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Duties and Responsibilities: Perform inspections of purchased parts according to acceptance criteria using standard sampling plan. Able to perform First Article Inspection (FAI) of manufactured parts, electromechanical assemblies and final assemblies. Physical, mechanical and/or electrical measurements in compliance with the company Quality System. Accurately document results of inspection / testing and maintain controlled document files, logs and test records. Inspect cables per wiring configuration. Initiate non-conformance process and assist in resolving non-conformances. Monitor receiving inspection backlog. Able to be flexible with the work schedule. Process SAP transactions to segregate and disposition non-conforming product. Other duties and responsibilities in the Quality Department as assigned. Ability to conduct basic troubleshooting and problem resolution. Education and Experience: High School Diploma or Equivalent. Preferred one year of experience in an FDA regulated environment and/or ISO 13485 standards in the medical device industry and/or in-vitro diagnostics preferred. Technical and physical position requirements: Familiar with measuring equipment such as micrometer, caliper height gauges, plug gauges. Able to lift at least 35 lbs. Strong attention to details and ability to understand and follow complex procedures. Working knowledge and experience in basic computer applications such as Microsoft Word, Excel and Outlook. Effective and clear written and verbal communication skills in English language. The US base salary range for this full-time position is $20.60 - $31.60. Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the base pay target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. In addition to compensation, Zoetis offers a comprehensive benefits package that supports the physical, emotional and financial wellbeing of our colleagues and their families including healthcare and insurance benefits beginning on day one, a 401K plan with a match and profit-sharing contribution from Zoetis, and 4 weeks of vacation. Visit zoetisbenefits.com to learn more. Full time RegularColleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of “@zoetis.com”. In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.

We are seeking a Server product system-level inspection and testing to join our production team by working efficiently in a fast-paced environment, and helping with system-level testing and troubleshooting. Pay rate: $22- $24 Shift: Swing shift 3:00 pm- 11:30 pm Essential Duties and Responsibilities: Includes the following essential duties and responsibilities (other duties may also be assigned): • Assist with Server system-level inspection & quality report-related paperwork. • Assist server system-level incoming quality control • Assist Server system-level testing & troubleshooting • Perform other production quality-related duties as directed by the supervisor Qualifications: • High school diploma required • At least 1 year in the field of QC/QA function is preferred • Language Skills: English is required; Mandarin is a plus • Be able to comply with overtime requirements • Excellent troubleshooting skills • Actively promotes production, quality, and safety standards • Motivated individual with the willingness to be a good team player #EmploynetJobsSanJose

Job purpose Perform inspection activities in the following areas; Incoming Inspection electrical and mechanical, In-process and Final areas of product. Inspect, audit, and report the quality level of incoming and outgoing products, ensuring that all customer quality requirements are being met such as: appearance, fit, form, function; including on time delivery of shipments. Reject and isolate defective part/s and accurately complete all associated paperwork and data entry with non-conforming reports. Perform duties according to IPC 600, IPC 610 and or J-Std-001 and J-Std-001 Space addendum (latest revisions) and our Quality System work instructions. Properly interpret customer documentation, drawings/blue prints, Bills of Material (BOM), datasheets and specifications and other documents necessary to perform inspection duties. Must be available to work over-time. Cross-train in other areas or perform other duties as required, by the Quality Supervisor. Duties and responsibilities Perform first article/piece inspection of parts at the beginning of each production run and verify requirements are met. Report discrepancies of material, process or design issues. Interface with Production, Inside Sales, Engineering, Program Management and Customer Representative. Perform roving sample inspection and quality audits in designated areas per documentation package to include; drawings, BOM, and other procedures to ensure continuous flow of acceptable products to our customers. Ensure conformity to customers documentation and report in-process concerns and discrepancies using IPC workmanship criteria. Interface with Production and Engineering personnel. Perform 100% final inspection to ensure the quality of materials, processes and overall quality performance has been achieved prior to shipping to Customers. Ensure that all acceptance and/or discrepancies have been documented. Interface with Production, Inside Sales, Engineering, Program Management and Customer Representatives. Perform mechanical and visual inspections in Receiving Inspection and mechanical areas to ensure the quality of incoming Turn-Key material and other services. Maintain quality records for evaluation of performance outside Vendors and throughout internal processes. Research customer history and use experience to determine part acceptance when a decision is needed based on judgment. Act independently and resolve problems by exercising initiative and discretion outside the sphere of specifically described job duties and responsibilities. Qualifications Must have 3-5 years experience as a Quality Inspector in one of the following areas: In Process, Final, or Source Inspection High school diploma or general education degree (GED) Prior manufacturing experience, knowledge of soldering and component recognition Basic reading, writing, and mathematical skills with the ability to write correspondence. Ability to read, write and understand written and verbal instructions. Capable of accurately charting inspection and test data. Physical ability to repetitively lift, stand, climb, and bend etc., within a manufacturing environment. Knowledge of using small hand measuring tools, test lights, capable of working under a microscope. Familiar with ISO9001, AS9100, or ISO13485 processes preferred. Comply with company policies and procedures. Website: **************** EEO / ACCOMMODATIONS Naprotek is an Equal Employment/Affirmative Action employer including Disability/Vets . We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. If you need a reasonable accommodation for any part of the employment process, please respond to this email and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

Job Description QC Inspector will perform inspection and determine compliance of partially or fully completed printed circuit assemblies to defined acceptability standards. Essential Duties and Responsibilities: Ability to complete PCB & PCBA level inspections competently. Scan boards inspected in the data collection system. Raise and review Technical Inquiries for any discrepancies as observed. At the end of the shift, make sure the working areas are clean. Escalate all issues to Supervisor / Engineer / Manager. If matters are unresolved, notify the Quality Manager immediately. Attend training as identified and implement all procedures pertaining to QMS, Be able to associate defects to workmanship standards specified by IPC (class 2 and 3) as well as custom requirements. Recommend opportunities for improvement. Read and understands Omega Quality Management System (QMS) Read and understands Omega Quality Policy Fill out any appropriate forms or records as required Complete all other duties as assigned by management. Other duties may be assigned Minimum Qualifications More than 5 years working in an electronics inspection environment within the CM or similar environment. Previous IPC-A-610 or J-STD-001 experience preferred. Must possess good working knowledge of CM technology (specifically circuit board assembly) Ability to read, write and communicate effectively in English to the degree necessary to perform the job. Knowledge of industry standard workmanship requirements (IPC-A-600 / IPC-A-610) Ability to visually verify fine detail work. Ability to understand and follow directions inspecting printed circuit assemblies (PCA's). Proficient at reading and interpreting blueprints, drawings, bills of material, etc. Basic competence with MSWord, Excel and Outlook (or equivalent preferred) Ability to work under pressure and prioritize tasks Must be able to sit for long periods of time conducting work while looking through a microscope or other magnification device. Skills Possess and demonstrate good team relations skills Demonstrated ability to follow instructions and achieve goals and tasks 7am to 3:30pm

Job Description The Mechanical QC Inspector will perform inspection of the sheet metal parts, and some other parts for electromechanical assemblies, in-process inspection of the electromechanical assemblies and final inspection of electromechanical assemblies. Incoming inspection: Verify the Manufacturer, Manufacturing part number Verify the part according to the part drawing Verify the part marking or Date code / Lot code per instructions Verify against any other specification as required Checks the packing list against the items received and the purchase order request Record the inspection results Create NCMR report for non-conforming products and moves them to MRB cage In-process and final inspection of electromechanical assemblies: Follow the Manufacturing Process Instructions and QC the assemblies Use the checklist for the products and verify all the check points at the sub-assemblies and Review and follow the deviations Create NCMR report for non-conforming products and moves them to MRB cage Perform any other related task assigned Education & Experience Education: Minimum High school Graduate Experience: Minimum 1 years working experience in Mechanical parts / Assemblies inspection Skills: Ability to read and understand the part and assembly drawings Ability to perform the dimensional and visual inspection per the drawings Knowledge of industry standard workmanship requirements IPC-A-610 is preferred Ability to read, write and communicate effectively in English to the degree necessary to perform the job Ability to use digital calipers, pin gauges and multimeter Able to lift 50 lb. weight as needed Basic computer skills for Excel and Outlook

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Pay = $2,350 Monthly working 2-3 days per week

Who we are looking for: ACV Auctions is looking for an enthusiastic Inspector who has a knack for cars and wants an opportunity to join a growing company. Our Inspectors are the face of our company. They know a ton about cars, and love to talk about them - explaining to our clients what they need to know in a way they can understand. They have boundless energy and work tirelessly to ensure our clients get nothing but the best. Our inspectors are meticulous. Nothing gets by them. At ACV Auctions we pride ourselves on Trust, Transparency, Credibility, and Customer Service and our Inspectors deliver this to our customers every day. What you will do: Actively and consistently support all efforts to simplify and enhance the customer experience. Partnering with a Territory Manager and a team of Inspectors, conducts inspections of vehicles at dealerships, auctions, and off-lease, to detect damage, missing parts and mechanical problems. Prepare and submit a report of vehicle condition, repair/replacement cost estimates, and related documentation. Help sales team up-sell or cross-sell services and products Interface regularly with our dealers to develop and ensure client satisfaction and build strong relationships. Travel to & from dealerships and homes to inspect, and write condition reports, list vehicles to sell on the auction platform. Take multiple, overall, and damage photos match them to a vehicle, and download them to the image server utilizing the company issued smart phone. List inspected wholesale vehicles utilizing ACV Auctions platform for bidding and purchasing. Sign up independent dealerships as buyers to utilize ACV Auctions digital platform. Perform additional duties as assigned. What you will need: 1 year(s) Experience in the automobile field (body, paint and mechanical repair knowledge) with customer service background Ability to read, write, speak and understand English. Ability to work outside in the elements for extended periods of time. Problem solving aptitude to meet challenges with resourcefulness and innovative approaches. Proven success to work independently with minimal supervision while working in a team environment. Excellent communicator with the ability to understand customer needs and expectations. Valid driver's license and use of a validly registered and insured motor vehicle required. Knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based applications. Ability to perform manual labor such as standing for extended periods, lifting up to or more than 25 lbs, bending, and squatting Ability to drive a manual & automatic transmission. Vision abilities required to properly identify small defects around and underneath vehicles. Compensation $23.50 - $25.50 per hour. This position is eligible for additional compensation pursuant to ACV's incentive compensation plan. Please note that final compensation will be determined based upon the applicant's relevant experience, skillset, location, business needs, market demands, and other factors as permitted by law. #J-18808-Ljbffr

Shift: 3rd shift, graveyard (shift begins: 10pm) Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Key Responsibilities: * Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards * Working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part * May evaluate new procedures for non-standard rest and perform special set-up on new equipment * Assist others in correcting or preventing deficiencies in quality or workmanship * Give work direction to other inspectors * Know your customers' expectations and drive action to meet them * Perform first article process * Identify component * Perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality a plus Required skill: * PCBA Experienced * Able to use measurement equipment. * Must be able to read ECO/Dev instruction/build drawer and BOM. * Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: * Attention to detail * Communication skills - verbal and written * Organized and good critical thinking skills * Data collection, management and analysis * Team work * Ability to interpret complex customer rules and regulations * Demonstrated skills in project management and ability to train others to lead projects * Works well independently * Excellent interpersonal and communication skills * Ability to manage time and prioritize multiple task in a fast paced environment * Proficient in use of MS Office applications * Knowledge of Lean manufacturing fundamentals FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic

Duties and Responsibilities: * Perform inspections of purchased parts according to acceptance criteria using standard sampling plan. * Able to perform First Article Inspection (FAI) of manufactured parts, electromechanical assemblies and final assemblies. * Physical, mechanical and/or electrical measurements in compliance with the company Quality System. * Accurately document results of inspection / testing and maintain controlled document files, logs and test records. * Inspect cables per wiring configuration. * Initiate non-conformance process and assist in resolving non-conformances. * Monitor receiving inspection backlog. * Able to be flexible with the work schedule. * Process SAP transactions to segregate and disposition non-conforming product. * Other duties and responsibilities in the Quality Department as assigned. * Ability to conduct basic troubleshooting and problem resolution. Education and Experience: * High School Diploma or Equivalent. Preferred one year of experience in an FDA regulated environment and/or ISO 13485 standards in the medical device industry and/or in-vitro diagnostics preferred. Technical and physical position requirements: * Familiar with measuring equipment such as micrometer, caliper height gauges, plug gauges. * Able to lift at least 35 lbs. * Strong attention to details and ability to understand and follow complex procedures. * Working knowledge and experience in basic computer applications such as Microsoft Word, Excel and Outlook. * Effective and clear written and verbal communication skills in English language. The US base salary range for this full-time position is $20.60 - $31.60. Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the base pay target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. In addition to compensation, Zoetis offers a comprehensive benefits package that supports the physical, emotional and financial wellbeing of our colleagues and their families including healthcare and insurance benefits beginning on day one, a 401K plan with a match and profit-sharing contribution from Zoetis, and 4 weeks of vacation. Visit zoetisbenefits.com to learn more. Full time Regular Colleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of "@zoetis.com". In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.