Inspector jobs in Lower Merion, PA - 203 jobs

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

RK&K is hiring a Building Construction Inspector to monitor active construction sites and perform complex and routine inspections of construction to ensure structures and facilities have been built in compliance with building codes and ordinances. Location will be Cecil County Maryland. Essential Functions Inspect facilities during various stages of construction and remodeling to ensure compliance with applicable codes, ordinances and regulations Examine plans and specifications of new construction, additions and alterations to facilities to determine compliance with the provisions of applicable city, state, and federal construction codes, ordinances, rules, and regulations Inspect existing buildings and premises for change of use, occupancy, or compliance with applicable codes and ordinances Inspect foundation, concrete, steel, masonry, wood construction, framing, plumbing, heating and electrical installations and a large variety of other complex and routine building system elements Directly responsible for reporting on-site activities and daily progress Responsible to be able to witness, understand, and verify all required on-site testing is being performed in accordance with applicable standards Maintain project records, files and reports regarding inspections and follow-on activities Required Skills and Experience High School diploma or equivalent Experience inspecting for compliance with local Building and Plumbing codes as well as the National Electric Code and UL compliance Experience inspecting HVAC installation including balance and alignment testing Experience with inspection of pumping units, including controls Experience with both installation and testing of fire alarm systems and fire suppression systems Experience interacting with local code inspectors, permitting agencies and the fire marshal. Must be able to operate basic Microsoft Office Applications, Laptop and iPad Excellent communication skills Ability to read and interpret construction drawings and specifications Ability to pass Criminal History Background Check (CHBC) Valid driver's license and favorable driving record Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today! Pay Rate: $30 - $38 per hour

We are seeking a dedicated civil engineer to oversee the replacement of lead service lines with copper ones. This role involves direct interaction with homeowners and requires strong communication skills. Responsibilities + Replace lead service lines with copper alternatives. + Communicate effectively with homeowners while on their property. + Conduct plumbing inspections outside homes. + Utilize a mobile app on a tablet to guide interactions and inspections. + Survey and canvass designated areas for service line inspections. Essential Skills + OSHA 10 certification. + Strong communication skills. + Experience or interest in construction. Additional Skills & Qualifications + Experience in environmental engineering. + Knowledge of excavation and site development. + Surveying skills. Work Environment The role requires door-to-door canvassing and surveying. Inspectors will use a tablet with a mobile app to guide their interactions and inspections. The company offers an employee discount program, 401k, and medical, dental, and vision insurance. Job Type & Location This is a Contract to Hire position based out of Philadelphia, PA. Pay and Benefits The pay range for this position is $20.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Philadelphia,PA. Application Deadline This position is anticipated to close on Jan 31, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Craft InspectorLocation: Middletown, PA (Surrounding Areas) Duration: 03/010/2024-12/31/2024Job Description:· The Craft Inspector performs the quality control (QC) function over the contractor's work as a part of the Company's quality assurance program and is responsible for the completion of all activities in his area of assignment in accordance with the appropriate Company specifications and the approved for construction drawings.Duties may include, but are not limited to:· Right-of-Way Clearing and Grading' Ditching, Stringing, and Bending' Lowering, Padding, and Backfilling' Road Boring' Tie-ins' Clean-up' inspection.· The inspector works under the direction of the Chief Inspector may be assigned additional responsibilities as required· The inspector provides quality assurance through inspection of work and materials for conformance to requirements.· The inspector is to complete required documentation (i.e. reports and log books) in a timely, concise, and accurate manner.· Familiarization with the approved construction drawings and the appropriate Company specifications in order to assure the work is performed in accordance with those requirements.· Familiarization with Contract documents (Agreement) as it relates to his or her duties on the project· Familiarization with applicable industry and regulatory codes' Familiarization with the Pre-Job Notes · Familiarization with the sequence of the work and plan inspection of upcoming activities· Report safety issues to the Chief Inspector and Safety Inspector· Drawing markups for as-built records· Hydrostatic tests and any test failures· Quantity, size, wall thickness, grade, heat number, other pipe nomenclature and pipe coating, and its location· Understanding the basics of pipe alignment, welding, and its inspection (specialized inspectors are required for the actual inspection)· Condition of ditch bottom Rocks, roots, clay, and other debris· Lifting and lowering in equipment· Understanding, monitoring, assessing, and reporting on painting and coating activities and items including but not limited to:· Vendor Product data sheet utilization· Proper application of paint and/or coating· Proper setup and use of holiday detector / jeep Requirements:· API 1169· OSHA 10 or OSHA 30 C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

A challenging and exciting career is waiting for you! General Dynamics Electric Boat has a proud history dating back to its incorporation on February 7, 1899, and the delivery of the first practical submarine to the U.S. Navy the following year. During the ensuing century, Electric Boat has been at the forefront of every innovation in submarine technology. Today, we are the nation's premier designer and builder of nuclear submarines. We deliver the advantage that protects our sailors, our families and our freedom! Benefits Medical, Dental, Vision Prescription Coverage Health and Wellness Programs 401K Commuter/Van Services Paid Vacation and holidays Paid training Advancement Opportunities Learn more at gdeb.com/careers The next step in support of the Virginia Class and Columbia construction process is executing work to Electric Boat paper in the focus factory at a supplier facility. Electric Boat is looking for successful candidates to perform inspection duties throughout the offsite locations, which will include verifying attributes for welds, structures and components. Candidates will be trained in Quality Control systems, Electric Boat procedures applicable to the work they are performing and Quality Department Instructions. Candidates must work in a collaborative environment to meet all company and organizational goals. This position is to be part of the new Imbedded Team in Philadelphia, PA building missile compartment decks, foundation, tanks etc. All successful candidates will be required to maintain a Magnetic Particle certification. Further opportunity for inspection disciplines such as Liquid Penetrant, Pre-Test, Electrical, Mechanical, etc. may be made available once proficiency has been achieved and maintained in Magnetic Particle. Candidates must successfully pass all Mock Audits and oversights to maintain certification. Above all, successful candidates must embody the Electric Boat's Core Values, work safely; be responsible for themselves, their peers, the ship and crew who will operate our vessel. This position will need inspectors who perform with integrity and purpose. Our sailors and their families deserve excellence in our workmanship and first time quality. We are the last line of defense for the integrity of our product. Relocation package will be offered with position to eligible candidates. This position is located at the Rhoads Industrial facility in Philadelphia, PA. Qualifications Required: High School Diploma or Equivalent OR 2 plus years of related technical experience Must be able to obtain & maintain an MT, PT, or ET certification Must be able to attain a key department qualification/certification within the first six months after starting as a Quality Inspector The successful candidate must be able to work all shifts, extended week days and weekends, and travel to offsite locations as needed. The shift will need to be flexible at times to support priority work. This is to support the workload for each Focus Factory site (travel could be 1 week to a few months at a time). Travel will be decided by the job and EWA or business travel will be used Travel expectancy will be 30-40% Ability to work at heights, tightly confined spaces and in extreme weather conditions Accurate documentation, record keeping, and archiving along with verifying previous status of work for completion is a critical job function Possess your own basic hand tools Ability to obtain and maintain a security clearance through the department of defense Preferred: Non-destructive testing experience Inspection/quality assurance experience Mechanical and Electrical experience Pipe hanger installation experience Structural experience Knowledge of shipboard assemblies, installations, components, and structures Metal fabrication experience Military shipbuilding experience Vocational, Technical and Community Colleges or Apprentice programs Related military/Navy experience Skills Ability to interpret technical manuals, shipyard procedures, test documents, blueprints, weld symbols and diagrams Basic mathematical skills Basic note taking Adaptability to switch from one job to another as business needs dictate Ability to communicate effectively with their management team and peers Must maintain a positive attitude and proactively attend to issues and concerns Attention to detail must be held at an extremely high level Physical Qualifications Climbing, Color Vision, Crawling, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes Acids or Alkalis, Cold, Dry, Dusty, Fumes, Hot, Inside, Noise, Oily, Outside, Wet We can recommend jobs specifically for you! Click here to get started.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Manheim Mobile Inspector II Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % No Work Shift Day Compensation Hourly base pay rate is $18.22 - $27.36/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description This position is classified as remote; however, the employee must reside and perform in the field in the designated local market. A Mobile Inspector II functions as a member of the Manheim mobile inspections team for a designated region with the primary responsibility of conducting vehicle condition inspections on a client's lot. Their core skill is to provide accurate and complete documentation of overall vehicle condition within the parameters of a Manheim inspection. This position will build trust with Clients, engage to help them see the value in the Manheim Marketplace, and to request more inventory to be inspected by providing quality and timely inspections. As a Mobile Inspector II, it is expected to perform tasks with minimal guidance and supervision, while demonstrating growing independence and problem-solving skills. Primary Duties & Key Responsibilities * Conduct a thorough vehicle inspection. * Locate, start, move, inspect, and return vehicles on dealer/clients' lot safely. * Verify vehicle identification and enter accurate vehicle information into the inspection system to correct VIN, mileage, and sub series. * Inspect vehicle equipment and options, documenting results including damage, missing or inoperable items. * Inspect and record vehicle exterior condition, including but not limited to tires, frame, glass, panels, and mechanical components. * Inspect and record the vehicle interior condition, including but not limited to seats, dashboard, and options. * Perform basic mechanical checks on vehicles including powertrain, drivetrain, and electrical components. * Prepare and provide daily activity reports for management. * Be able to pivot and adapt to changes in daily appointments to ensure efficiency and effectiveness of each dealer visit * Develop strong knowledge of clients in territory and work together with partners to keep them active with Manheim mobile inspections through regular, pro-active on lot engagement * Receive data and insight from partners and leverage to maximize volume of units inspected on dealer lots. * Represent Cox Automotive as a brand ambassador and provide premier client experience by interfacing regularly core clients and ensuring satisfaction. * Functions as a solid team player and works closely with the Wholesale Specialist team, peers, other Manheim workgroups and auctions. * Utilize SalesForce.com for reporting, lead input and customer performance reviews. * Understanding NAAA Frame/Structure Damage Policy. * Will work in a continuous improvement/Lean environment and encouraged to drive a lean culture. * Maintain production expectations set by the leader. * Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. * Other duties as assigned. Required Experience & Specialist Knowledge and Skills * High School Diploma/GED required and 3 years experience. * Automotive knowledge is preferred, body and mechanical. * 1-2 years of any automotive related experience preferred. * Valid driver's license and safe driving record required. * Travel 100% - Reliable transportation required. Reimbursement program dependent on number of miles driven. * Good communication and interpersonal skills required. * Strong technical aptitude. * Must be detail orientated. * Experience in navigating handheld and other documentation devices preferred. * Motivated to work independently with remote supervision. * Ability to multitask, follow directions and take instruction is required. * Body, paint, and mechanical repair knowledge helpful. * Familiarity with unibody and full-frame helpful. * Ability to lift and hold at least 30 lbs. at waist level for an extended period of time. * Regularly required to stand, walk, talk, and hear. * Frequently required to crouch, bend, and kneel to look at side or underneath car. Strength to lift hood or trunk. Bend while performing audits. Reach inside or underneath vehicle. * Near vision abilities required to find dings and scratches, paint work, hail damage, frame/unibody, other exterior damage and Interior damage. Able to identify exterior or interior colors. * Ability to deal with different lighting (i.e. exterior and interior lighting, natural and artificial light) * Requires physical ability and mental acuity to execute the duties of the position successfully within required timeframes to meet business requirements. DMCOX Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Conduct thorough inspections of various properties to ensure compliance with regulations and standards Document inspection findings and prepare detailed reports Identify any issues or violations and recommend corrective actions Communicate effectively with property owners, contractors, and other stakeholders Stay updated on industry regulations and best practices Collaborate with team members to achieve inspection goals Requirements: Proven experience as an inspector or similar role Knowledge of relevant regulations and standards Excellent attention to detail Strong communication and reporting skills Ability to work independently and as part of a team Certification or licensure may be required Benefits: Competitive salary Healthcare and wellness benefits Paid time off Career growth opportunities Training and development programs

Industrial Inspection & Analysis is searching for an ANSI Inspector located in Pennsylvania to join our Lifting Services team. The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure the heavy equipment is in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications Mechanically inclined. Basic knowledge of mechanical processes, movement, and assembly. Basic knowledge of hand tools. Proficient computer skills. Strong communication skills. Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution. Must be able to work independently with some direction from management. Problem solver, detail oriented. Job Requirements Able to stand, sit, squat, climb, crawl and twist for extended periods of time. Ability to lift up to 50 pounds. Must be punctual, accountable, and provide high quality customer service. Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays. Must have valid driver's license and be able to pass a background check and drug screen. We offer medical, dental, and vision benefits, a 401K plan, and paid time off and holidays. Industrial Inspection & Analysis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. IIA complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, without limitation, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

The NDT Advanced Services CWI Inspector is responsible for performing visual inspections on welded products and structures to ensure that work produced by welders meets specifications in NDT services. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values. * Performs internal and external inspections to determine if welded products and structures meet the acceptance criteria of a specific code, standard or document. * Properly interprets regulations, codes, and industry standards. * Ensures work is implement as required by project specifications. * Compiles and submits completed inspection reports in a timely manner. * Completes the Inspection, Test Plan and status report. * Reviews surveillance documents for any issues. * Schedules and conducts Pre-Inspection Meetings. * Communicates regularly with customers on scheduling activities as detailed by the customer. * Plans travel and surveillance activities/ visits to effectively utilize time and minimize expenses. * Maintains the Inspection Folder. Job Qualifications * High school diploma or equivalent preferred * Previous industry related inspection experience preferred. * SCWI, CWI or CAWI certification required. * Must be able to pass a Vision Test. * Travel Requirements: 0% - 50% Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills * This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

This is the perfect job for a retiree or college student wanting to make some extra cash! Duties / Responsibilities: Verify vehicle information- identify damage and verify visible condition of vehicle (i.e., interior, exterior, odometer reading, trunk area, engine compartment, modifications) Prepare and complete all necessary documentation. Great attitude with a detailed focus on customer care to create a superior customer experience. Required Skills/Abilities: Valid driver's license and safe driving record required. Good communication and interpersonal skills required. Motivated and ability to work with remote supervision. Good organizational skills needed. Understanding of baseline inspections & vehicle grading. Physical Requirements: This role will require you to work outdoors up to 50% of the time. GIVE ME THE VIN is a fast-growing auto wholesaler with a unique twist ~ we buy cars directly from everyday people, from luxury to classics to junk, then resell to major auctions like Manheim. Our process is quick, simple, and designed to give top dollar to sellers. At the core of our business is integrity. We believe in transparency ~ with our customers and our employees. Our culture is fast-paced, driven by knowledge, and built for people who want to grow with us. We're proud to offer a laid-back, locker room-style atmosphere where hard work, honesty, and humor go a long way.

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Pay = $990 monthly working 6 days per month

Job Title: NICET II Transportation Construction InspectorJob Description The NICET II Transportation Construction Inspector plays a crucial role in ensuring that roadway, bridge, and highway construction projects adhere to design specifications, safety standards, and regulatory requirements. This position involves field inspections, materials verification, documentation, and coordination with contractors, engineers, and state or local transportation agencies. Responsibilities * Perform daily field inspections on roadway, bridge, and highway construction activities to verify compliance with approved plans, specifications, and contract documents. * Monitor construction materials such as concrete, asphalt, aggregates, reinforcing steel, and structural components for proper installation and quality. * Verify grades, elevations, and layout using surveying tools and construction drawings. * Document all field activities, including work progress, test results, deficiencies, and contractor operations, using standardized reporting systems. * Observe structural work such as formwork, rebar placement, concrete pours, structural steel erection, and bridge deck construction. * Ensure work zone safety compliance, including traffic control setups, signage, and worker protection measures. * Coordinate and witness materials testing, including compaction tests, concrete sampling, asphalt density checks, and soil classification. * Communicate effectively with contractors, project managers, engineers, and DOT representatives regarding project status and issues. * Identify non-conforming work and assist in resolving construction problems through field adjustments or corrective actions. * Maintain accurate project records for audits, pay estimates, and project closeout. Essential Skills * NICET Level II certification in Transportation Construction Inspection (or actively pursuing). * Experience with roadway, bridge, or civil infrastructure construction. * Strong understanding of DOT standards, specifications, and construction best practices. * Ability to read and interpret construction plans, cross-sections, specifications, and shop drawings. * Familiarity with materials testing procedures and inspection tools. * Strong written and verbal communication skills. * Valid driver's license and ability to work outdoors in varying conditions. Additional Skills & Qualifications * Experience with NJDOT and FHWA (federal highway) standards. * Quality assurance and quality inspection expertise. Work Environment The work environment involves on-site work on roadways, meeting with residents, and interfacing with clients. The role requires the ability to work outdoors in varying conditions. Job Type & Location This is a Contract position based out of Mount Laurel, NJ. Pay and Benefits The pay range for this position is $40.00 - $60.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mount Laurel,NJ. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Manheim Sr Mobile Inspector Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % No Work Shift Day Compensation Hourly base pay rate is $20.00 - $30.00/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description This position is classified as remote; however, the employee must reside and perform in the field in the designated local market. A Sr. Mobile Inspector functions as an advanced member of the Manheim mobile inspections team for a designated region with the primary responsibilities of conducting vehicle condition inspections a client's lot. Their core skill is to provide accurate and complete documentation of overall vehicle condition within the parameters of a Manheim inspection. This position will build trust with clients, engage to help them see the value in the Manheim Marketplace, and to request more inventory to be inspected by providing quality and timely inspections. As a Sr Mobile Inspector, this role is expected to work with little guidance and can solve problems with minimal oversight. They will assist with junior inspectors as they gain inspection experience and build client relationships. Primary Duties & Key Responsibilities * Conduct a thorough vehicle inspection at an expert level. * Locate, start, move, inspect, and return vehicles on dealer/clients' lot safely. * Verify vehicle identification and enter accurate vehicle information into the inspection system to correct VIN, mileage, and sub series. * Inspect vehicle equipment and options, documenting results including damage, missing or inoperable items. * Inspect and record vehicle exterior condition, including but not limited to tires, frame, glass, panels, and mechanical components. * Inspect and record the vehicle interior condition, including but not limited to seats, dashboard, and options. * Perform basic mechanical checks on vehicles including powertrain, drivetrain, and electrical components. * Will assist lower-level mobile inspectors to navigate more complex inspections and client relationships. * Prepare and provide daily activity reports for management. * Be able to pivot and adapt to changes in daily appointments to ensure efficiency and effectiveness of each dealer visit * Develop strong knowledge of clients in territory and work together with partners to keep them active with Manheim mobile inspections through regular, pro-active on lot engagement * Receive data and insight from partners and leverage to maximize volume of units inspected on dealer lots. * Represent Cox Automotive as a brand ambassador to provide premier client experience by interfacing regularly core clients and ensuring satisfaction. * Functions as a solid team player and works closely with the Wholesale Specialist team, peers, other Manheim workgroups and auctions. * Utilize SalesForce.com for reporting, lead input and customer performance reviews. * Understanding NAAA Frame/Structure Damage Policy. * Will work in a continuous improvement/Lean environment and encouraged to drive a lean culture. * Maintain production expectations set by the leader. * Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. * Other duties as assigned. Required Experience & Specialist Knowledge and Skills * High School Diploma/GED and 5+ years' experience required. * Previous vehicle inspection experience and automotive knowledge is required, body and mechanical. * 2-3 years of any automotive-related experience is strongly preferred. * 1 year of service with Manheim Inspections recommended. * Valid driver's license and safe driving record required. * Travel 100% - Reliable transportation required. Reimbursement program dependent on number of miles drive. * Good communication and interpersonal skills required. * Strong technical aptitude. * Must be detail orientated. * Experience in navigating handheld and other documentation devices preferred. * Motivated to work independently with remote supervision. * Ability to multitask, follow directions and take instruction is required. * Body, paint, and mechanical repair knowledge helpful. * Familiarity with unibody and full-frame helpful. * Ability to lift and hold at least 30 lbs. at waist level for an extended period of time. * Regularly required to stand, walk, talk, and hear. * Frequently required to crouch, bend, and kneel to look at side or underneath car. Strength to lift hood or trunk. Bend while performing audits. Reach inside or underneath vehicle. * Near vision abilities required to find dings and scratches, paint work, hail damage, frame/unibody, other exterior damage and Interior damage. Able to identify exterior or interior colors. * Ability to deal with different lighting (i.e. exterior and interior lighting, natural and artificial light) * Requires physical ability and mental acuity to execute the duties of the position successfully within required timeframes to meet business requirements. Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

The NDT Advanced Services API Inspector is responsible for performing inspections in accordance with API standards designated equipment for purposes of recommending and approving repairs or certifying compliance. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values and Seven Critical Choices. * Performs internal and external inspections on equipment at scheduled intervals to maintain the mechanical integrity of fixed equipment. * Recommends and approves repairs as well as performs visual inspection of completed repair work. * Assists in scheduling activities related to inspection. * Writes detailed inspection and turnaround reports, and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate and deal with customers and other parties in such a manner as to benefit the professional reputation of the company. This communication is in person at the plant / job site. * Complete all required training, including tests, within Company guidelines. * Perform necessary filing of customer and company job related forms and paperwork. Job Qualifications * High school diploma or equivalent preferred. * Technical school or other related training preferred. * Previous industry related experience preferred. * Must possess valid API certification. * Must possess valid Driver's License. * Travel requirement: 0% - 50%. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis. * Candidate must be capable of climbing, working at high elevations and working in confined spaces. Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively. * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills. This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability