Inspector jobs in Manchester, CT

Job Posting Start Date 12-09-2025 Job Posting End Date 02-27-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary Summary: The “Quality Control Inspector” will be based in ……., reporting to …… Inspects electronic systems, assemblies, subassemblies, components and parts for conformance to specifications. Responsibilities: Performs visual inspection of electronic card and sub-assemblies, and systems or units to ensure that all product meets the established specifications for reliability and workmanship. Utilizes gages, templates, microscopes and other manufacturing aids to ensure that all product meets the established specifications for reliability and workmanship. Ensures that all required process operations have been performed on the product that is being inspected. Enters all quality data into the appropriate electronic or manual systems. Notifies the appropriate personnel if unusual product defects are identified or if process falls below acceptable levels. Provides timely feedback to manufacturing if non-conforming product is identified. Accurately completes all administrative activities associated with quality inspection. Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards. Assists with the disposition of all non-conforming materials/product. Qualifications: Completion of a high school degree or equivalent is preferred. Successful completion of company provided training may be required. Typically requires 1 year of quality or related experience. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryQuality Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Based in West Hartford, CT, Triumph Systems, Electronics and Controls is a leading independent aerospace system supplier for the commercial and military helicopter and business jet markets and employs approximately 500 employees. The Company's key products and services include electronic engine controls, fuel metering units, main fuel pumps and environmental control systems for both the OE and aftermarket/spares end markets. Responsibilities Summary: Performs Nondestructive Testing inspections to meet customer, NADCAP, FAA, and internal processing requirements. Assures product quality by utilizing a specialized combination of skill, knowledge, interpretation, attention to detail, communication and technical ability. Job Duties: * Able to perform all phases of Magnetic Particle & Fluorescent Penetrant Inspection method requirements. * Accomplishes and maintains certification requirements as a Level 2 inspector per NAS 410. Includes formal classroom training, on-the-job training, examinations, and proficiency requirements. * Assures product quality and manufacturing accuracy by properly processing, interpreting, and evaluating NDT inspection processes. * Maintains product quality documentation by keeping accurate records and files. * Completes, documents, and maintains all process control tasks for NDT inspection systems and equipment as required. * Complies with applicable NDT Inspection Technique Sheets. Able to research and develop NDT Inspection Technique Sheets based on blueprint & specification requirements. * Ensure that inspections and equipment requirements conform to applicable customer flow-down by the interpretation of blueprints and specifications. * Contributes to team effort by maintaining a positive outlook. * Complies with all company policies and procedures, including safety requirements. * Participates in NADCAP audits. * Other duties as assigned to ensure customer needs are met. * Qualifications Minimum Education Required: High School or Technical School Diploma or equivalent. Minimum Years of Experience required: Three (3) years in a Nondestructive testing environment (aerospace industry preferred), Quality Assurance experience preferred. Key Knowledge, Skills and Abilities Required: * NDT Level 2 certified in MT and PT * Technical/functional knowledge FPI & MPI Methods * Working knowledge of NAS410, NADCAP & AS9100. * Communication * Teamwork * Mathematical ability * Decision making * Problem solving * Detail oriented * Basic PC skills * Ability to learn and understand directions Ability to read and write English Benefits: * Comprehensive medical, dental and vision coverage with plan options that provide flexibility and choice (including telehealth options) * Healthcare spending accounts * Paid parental leave * Paid/flexible time off in addition to paid company holidays * 401(k) with company match * Disability and life insurance * Incentives and performance-based rewards * Exciting growth and development opportunities empowered by our TRIUMPH Transformation and an entrepreneurial environment that encourages innovation and creativity Work Environment and Physical Demands: The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk, or hear. The employee frequently is required to stand, walk, and use hands to finger, handle, or feel objects, tools, or controls. The employee is occasionally required to reach with hands and arms: stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Our Vision: As one team, we enable the safety and prosperity of the world. Our Mission: We partner with our Customers to TRIUMPH over their hardest aerospace, defense, and industrial challenges to deliver value to our stakeholders. Our Values: * Integrity - Do the right thing for our stakeholders. We value safety, diversity, and respect. * Teamwork - Win as One team-one company. Solicit help and assist others. * Continuous Improvement - Pursue zero defect quality. Attack problems and relentlessly raise the bar. * Innovation - Passion for growing the business. Lead through ingenuity and entrepreneurship. * Act with Velocity - Partner, anticipate and communicate. Proactively solve problems. Code of Conduct: To perform the job successfully, an individual should demonstrate the TRIUMPH behaviors captured within our core values: Integrity, Teamwork, Continuous Improvement, Innovation, and Act with Velocity. Detailed definitions are below and performance metrics for each behavior can be found on our intranet and is embedded within our Performance Management processes. All employees are expected to represent the values and maintain the standards contained in TRIUMPH's Code of Conduct. Environmental, Health, and Safety (EHS): Employees are responsible for the Health, Safety, and Welfare of themselves, the environment, and other people. All employees must comply with EHS policy training and instructions, help to maintain a safe and clean working environment, and use any Personal Protective Equipment (PPE) provided by the Company. Employees must report any accidents, incidents, and near misses to management. Additionally, employees are expected to notify management of any dangerous or potentially dangerous situations or practices. Additional Information: Triumph is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. SELECT US positions require access to technology, materials, software or hardware that is controlled by US export laws including the International Traffic in Arms Regulations ("ITAR") and the Export administration Regulations ("EAR"). In order to be eligible for applicable positions, you must be a US Person under ITAR or eligible for approval for a U.S. Government export license. A US Person is a US Citizen, Lawful Permanent Resident, refugee or asylee. All inquires related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. U.S. applicants must be legally authorized to work in the United States without company sponsorship. Please contact us if you require assistance in applying for TRIUMPH and we will provide reasonable accommodations via *****************************.

WHO ARE WE: BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating innovative engineered supply solutions. We truly believe in the importance of the local relationships with the customers we service. Our employees have fun every day exceeding the expectations of our customers, suppliers, and shareholders. We distinguish ourselves as the #1 choice of industrial manufacturers who are in need of Technical Service and Production Savings. We are BIG ENOUGH TO SERVE, and SMALL ENOUGH TO CARE. **This position is located onsite in Southington, CT** SUMMARY: The Quality Inspector is responsible for inspection of cutting tools by reading prints and inspecting tools by using micrometers, calipers, comparators, indicators and other measuring tools/machines, to ensure that they meet quality standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Personally exhibits, recruits and coach's associates consistent with Core Behaviors Responsible for promoting culture of safety Perform final quality inspection of finished products in accordance with the established procedures Report all instances of rejected product or raw materials problems to management Inspect incoming raw materials as materials are received Document appropriate information for quality inspection reports for each order Create and maintain current files for all quality related correspondence Work with shop floor supervisor to review internal rejects from the shop floor Report any unusual discrepancies or problems promptly to management Perform internal quality audits Perform other related duties as assigned Knowledge and ability to use micrometers, vernier caliper, radius gages and other video inspection equipment Competent with applying math skills/tool geometry SKILLS: Knowledge of cutting tools Excellent math aptitude Excellent customer service skills Excellent communication, interpersonal and organizational skills Diplomatic and professional when resolving issues Work well under pressure, and have exceptional time management skills Self-motivated and able to work independently Must be able to follow instructions in a fast paced, flexible environment EDUCATION and/or EXPERIENCE: High School Diploma or equivalent required Prior experience inspecting aerospace cutting tools preferred CERTIFICATES, LICENSES, REGISTRATIONS: None required WORK ENVIRONMENT: Employee is regularly required to speak and hear English, stand, walk, sit, use hand to finger, handle or feel objects, tools, or controls; reach with hands and arms. Employees are required to use computers and other equipment. Employees frequently lift and/or move up to 40 pounds. Specific vision abilities include close vision and the ability to clearly focus vision. PPE REQUIRED: Wrist rests for keyboard and mouse pad. Eye protection, ear protection, steel-toed shoes as required BENEFITS: Health Insurance BCBS of OK HDHP HSA with Employer match (must meet criteria) Dental and Vision Insurance 401K Plan and Company Match FSA (Full FSA, Limited FSA, and Dependent FSA) Company paid Long Term and Short-Term Disability Company paid basic Life Insurance and AD&D/ Supplemental life and AD&D/Dependent life Ancillary Critical Illness Insurance (Wellness Rider Included) Ancillary Accident Insurance (Wellness Rider Included) Ancillary Hospital Indemnity Employee Assistance Program (EAP) - Includes concierge services and travel assistance. Paid Time Off Holiday Paid Time Off Gym Reimbursement Quarterly Wellness challenge with a chance to will money or prizes Tuition Reimbursement - after 1 year of employment *BlackHawk Industrial is an Equal Opportunity Employer **As part of our BHID policy, we require all potential employees to undergo pre-employment background and drug screening. This is a standard procedure we follow to ensure a safe and productive work environment.

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. PAY RANGE: $32.00/hour- $42.00/hour based on experience Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Job Purpose for Inspector: Maintains quality standards by approving incoming materials, in-process production, and finished products and recording quality results. Duties of Bench Inspector: * Approves in-process and finished products by confirming specifications; conducting visual and measurement tests. * Working from purchase orders, special process certifications, operation sheets, blueprints, and other specifications, ensures that all parts and materials are in full compliance. * Performs complex dimensional layout inspection to operation sheet/blueprint. * Completes Inspection Method Sheets and verifies special process certifications to part specifications. * Performs 1st piece/FAI. Has proven knowledge of Inspection Xpert/Net-Inspect a plus. Aerospace Bench Inspector Skills/Qualifications: * Layout experience is a plus * 0-8 years experience as an inspector in Aerospace or similar industry * Analyzing manufacturing methods and procedures * GD&T skills are highly emphasized * Solid verbal and interpersonal skills, analytical and shop math skills, as well as working knowledge of Microsoft Excel It is the policy of this company to extend equal employment opportunities to all qualified employees without regard to race, color, religion, creed, marital status, learning disability, sexual orientation, national origin, sex, age, history of mental illness, mental retardation or physical, unless such disability prevents performance of the work involved. This policy applies to all phases of employment including, but not limited to, recruitment, hiring, placement, upgrading and promotion, transfer, layoff and recall, termination, selection for company sponsored training programs, rates of pay and other forms of compensation, use of facilities, and participation in all company sponsored activities.

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Director of Operations Location: Waterbury, CT Department: Quality Shift: First Shift 6am - 2:30pm JOB SUMMARY QC Stamping Inspector's primary function is the quality evaluation through gauging and inspection to validate the acceptability of stamping production, the capture of nonconforming product and the documenting of that acceptability. Evaluation is conducted as specified through provided gauging and inspection standards. QC Stamping inspectors also provide general “Quality” training, support and guidance to Stamping Department Personnel ESSENTIAL FUNCTIONS Gather samples from each stamping press twice per shift, performs visual and dimensional inspection, recording dimensional results in Mongoose (stamping inspection system of record) as well as on the Stamping Inspection Shift Report (excel file) Conduct proper defect containment, inform the Press Operators of any defects identified, as well as Set-Up personnel, Toolmakers, Tooling Engineer and/or Stamping Dept. Manager as applicable. Record actions (i.e. scrap, hold, etc..) on the Stamping Inspection Shift Report Receive QC LAB (also receiving inspection group) anodizing report, as well as supporting defect samples and address quality issues specified in their report Conduct “outgoing” (from stamping) skid audits for product from presses identified by the Stamping Q.E. Report data as specified Provided training to Stamping Department personnel as a qualified TWI trainer (Includes but not limited to developing TWI instructional break downs, providing individual training for TWI, documenting & tracking provided training, auditing TWI tasks as indicated by management) For Start-up ensure that proper documentation and standards are at each press (gauge plan, part drawing, skid tags, skid labels, and standard boards) Perform “Start-Up” inspection using applicable gauge plan, applicable standard boards and past start-up retains. Record all results on Stamping Inspection Report Maintain “Start-Up Retains Bank” located in the Toolmaker work area. As startups are approved, one raw and one anodized sample from the Start-up will be marked with the approval date and placed in the appropriate bin to be referenced on future start ups At the beginning of each shift Stamping Q.C. Inspectors will review each press and ensure correct labels, gauge plan, part drawing and correct skid tags are being used Keep Department QC Stations and/or QC Work Areas orderly at all times. Double check to make sure proper prints, gauging and inspection plans are at each press and in the QC areas as assigned. Inspect and report inspection results for New Product Development (NPD) by completing the applicable Stamping Quality portion of the First Piece Submission Routing Form Any other duties that may be assigned, including data entry, QC checks on discrepant materials, production and quality reporting, filing and maintaining paperwork, etc. Assist with any other duties and projects as required QUALIFICATIONS Must be proficient in gauging methods and procedures. Must maintain an excellent attendance record. Must be able to work independently without constant supervision and be able to work overtime as needed to cover absences. Must be proficient in the use of Microsoft Office Applications (Outlook, Excel, Word and Power Point at a minimum). Must have basic knowledge of or be trainable on Syteline. Must be able to wear prescribed safety equipment and promote a safe work environment. #1Anomatic

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: To perform all aspects necessary that the required inspections are used in the manufacturing of Machined, Tubes and Sheet metal components. Location: South Windsor, CT This position is 100% on site. Responsibilities include the following. Check all work by mechanical and electronic inspection methods on the production parts, sub-assemblies, details, or components as production progresses to determine accuracy and completeness of layouts and correctness of machining or other processing. Perform visual and dimensional inspection using inspection tools and gages, such as scribes, vernier calipers, height gages, depth gages, micrometers, cylindrical plugs and thread gages, periphery or PI tapes, decimal scales, indicators, inspection fixtures, coordinate measuring machine and other automated measuring devices. Responsible identifying non-conforming material and completing reports on defects. Demonstrate a good mechanical aptitude. Other duties may be assigned as necessary. Required Qualifications: High school diploma or equivalent 0-1 years of quality related experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: 1-2 years of quality related experience Physical Requirements: This full section, or unrelated bullets, could be removed if not relevant. Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 15 pounds. Compensation & Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Quality Inspector - Precision Parts | Direct Hire $17-$30 per hour, based on experience Love working with precision? Here's your chance to put your skills to the test! We're hiring a Quality Inspector to ensure every part meets exact standards. If you thrive on accuracy, this role is for you. What You'll Do: Inspect incoming, in-process, and finished metal parts Work with tight tolerances and detailed specifications Read and interpret blueprints / GD&T Play a key role in delivering top-quality products What You Bring: Hands-on inspection experience with close tolerances Strong GD&T and blueprint reading skills Stable work history in quality/manufacturing Aerospace background = big plus! Why You'll Love It: Direct hire opportunity Competitive pay: $17-$30/hr DOE Join a team that values precision and craftsmanship Your attention to detail could be exactly what we're looking for. Apply today and take your quality control career to the next level! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Job DescriptionQuality Inspector - Precision Parts | Direct Hire $17-$30 per hour, based on experience Love working with precision? Here's your chance to put your skills to the test! We're hiring a Quality Inspector to ensure every part meets exact standards. If you thrive on accuracy, this role is for you. What You'll Do: Inspect incoming, in-process, and finished metal parts Work with tight tolerances and detailed specifications Read and interpret blueprints / GD&T Play a key role in delivering top-quality products What You Bring: Hands-on inspection experience with close tolerances Strong GD&T and blueprint reading skills Stable work history in quality/manufacturing Aerospace background = big plus! Why You'll Love It: Direct hire opportunity Competitive pay: $17-$30/hr DOE Join a team that values precision and craftsmanship Your attention to detail could be exactly what we're looking for. Apply today and take your quality control career to the next level! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

A successful candidate will be self-motivated, accurate, thorough, and willing to work in a fast-paced team environment. Applicants should have a minimum of one year experience performing dimensional inspection on metal components using handheld measuring tools (verniers, micrometers, height stands, indicators) and/or coordinate measuring machines. First and second shift positions are available in a bright, clean, climate-controlled area. Advancement opportunities available. Training available. Responsibilities: + Perform dimensional inspection on metallic aerospace engine parts using Coordinate Measuring Machines and/or conventional hand-held inspection tools. (Brown+Sharpe, PC-DMIS, and/or Zeiss Calypso experience a plus) + Interpret drawings, operation sheets, work instructions, and customer specifications (General Electric and/or Honeywell experience a plus) + Interpret inspection results and communicate results to Quality, Manufacturing, and Engineering team members + Use of a Windows based computer database to obtain or record inspection information and results Benefits: + Health and Medical benefits, including Vision, Dental, Disability, and Life-Insurance + 401(k) plan with company match + Paid sick, vacation, and holidays + No earnings cap + Performance based bonuses + Overtime available + Advancement opportunities available Located in South Windsor, CT Qualified candidates may email their résumé along with a completedapplication form to:************************ (https://web.archive.org/web/**********1042/************************) or apply in person at Electro-Methods, Inc. 330 Governors Hwy, South Windsor, CT 06074.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Navigate Valence on-line system for QWI's, QAP's, Specifications and other documents. Competently Maintain and operates all inventories, machinery and instruments necessary to safely perform the job function, including routine. Competently process all paperwork and department clerical functions in the performance of this jobs function. Competently perform all daily, weekly and periodic functions as defined in OJT. Maintain a clean, safe work environment. Understand, and perform steps defined in the Valence ROUTER, follow Valence procedures on correctly filling out routers, corrections of input mistakes. Competently process job/parts with little or no supervision. Practice behavior which avoids damage to parts and protects the part from damage. WORK ENVIRONMENT The position involves working with and around hazardous chemicals, paints and solvents. The majority of work is performed in shop conditions. Company Benefits: Medical, Dental, Vision, Long term Disability, Employee Assistance Program, 401(K)-3% Match, Holiday Pay COMPENSATION RANGE: $20.00 To $24.00 Per hour.

Working at Breeze Airways is an exciting endeavor and a serious commitment to bring “The World's Nicest Airline” to life. We work cross-functionally with truly awesome Team Members to deliver on our mission: “To make the world of travel simple, affordable, and convenient. Improving our guests travel experience using technology, ingenuity and kindness.” Breeze is hiring- join us! The Quality Control Inspector is responsible for the daily operation of the Quality Control (QC) department at his or her location Including the development, oversight, and accomplishment of daily Aircraft Inspection activities. They will report to the Manager, Quality Control and support the overall surveillance of the Aircraft Maintenance System to ensure compliance with company maintenance procedures and regulatory requirements. This position requires strong communication across all areas of Operations, including Technical Operations, Aircraft Maintenance, Quality Control, Quality Assurance and Engineering teams. Breeze is looking for great and experienced talent. Your entry pay will based on your experience ( up to $39.00 starting pay ) and our established criteria. $2.00 shift differential added when working from 9:00PM - 7:30AM Here's what you'll do Responsible for administering Breeze Airways policies in Quality Control and inspection in a line maintenance environment. Conduct surveillance and oversight of work performed at line Maintenance locations to ensure Breeze standards and those prescribed by the Code of Federal Regulations (CFR) are maintained. Perform aircraft Required Inspections (RII) as described in company manuals. Performs Materials Receiving inspections as described in company manuals. Performs engine Borescopes as described in engineering orders and OEM data. Performs NDT Inspections as described in engineering orders and OEM data. Self-starter with a team mentality and culture driven mindset. Reports to the Manager, Quality Control. Duties/Responsibilities Plan and control the application of inspection and quality control methods and procedures to ensure the safe, reliable, and economic performance of Breeze aircraft. Support the Quality Control Program, including Required Inspection Items and RII Authorized Inspectors as specified in the Breeze Airways GMM. Support the Receiving Inspection Program, including Receiving Inspection Procedures as specified in the Breeze Airways GMM. Monitor workmanship and materials to verify that applicable Breeze and FAA regulations and standards are complied with. Conduct an on-going program to enhance the level of professionalism and state-of-the-art inspection applications within the inspection department. Administer, and support, and support the NDT program, performance, and workmanship to verify that applicable Breeze and FAA regulations and standards are complied with. Oversee the establishment and implementation of tool procedures and monitor tooling policies and calibration procedures to ensure tooling meets conformity, equivalency, and all calibration standards. Develop recommendations for new tools that promote increased tool and equipment availability, reliability, or enhanced maintenance capability. Support procedures for calibration of tools and equipment based on manufactures recommendations. Recommend changes to the maintenance program and work specifications, based on recurring discrepant conditions found on Breeze aircraft undergoing maintenance. Apprise the Manager of Quality Control and Chief Inspector of any issues that may affect safety, quality, or schedule of Breeze aircraft during aircraft maintenance. Provide leadership and direction to ensure that high standards of performance are maintained in the areas of Quality, Safety. Maintain compliance with SMS and Company safety policies and procedures as well as Federal Regulations by reporting any safety hazard or potential hazard. Include SMS in your daily work habits and remain current in the training requirements for SMS. Embody the Breeze Values and conduct oneself with Safety, Kindness, Integrity, Ingenuity, and Excellence. Perform such other duties as assigned by the Manager. Quality Control and Chief Inspector. Here's what you'll need to be successful Minimum Qualifications Must be at least 18 years of age High school diploma or equivalent educational achievement Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions Five years of Aviation Maintenance experience with at least three years in Quality Control/Assurance/Inspection Understanding and working knowledge of FAR part 43, 65, 91, 121, and 145 Must have a valid driver's license Must have a valid passport with no travel restrictions Must have authorization to work in the US as defined by the Immigration Reform Act of 1986 Must be flexible and willing to work days, nights, weekends, holidays, and overtime if needed Must be willing to travel up to 30% of the time Must be willing to work with other departments within the company as needed Must pass a DOT pre-employment drug test Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check Ability to read, write, speak, and understand the English language Preferred Qualifications At least two (2) years in management or a leadership role Degree in Aerospace, Aviation Maintenance, or Business Ten years of FAR 121 air carrier aircraft maintenance experience Understanding of Safety Management System (SMS) rules Skills/Talents Skilled in Microsoft Office Suite (Word, Excel, Outlook) Excellent communications skills, both verbal and written Strong presentation skills with the ability to communicate to Leadership Must be able to handle high-stress situations Ability to work with fellow Team Members with a variety of personalities Ability to multi-task easily Must be fluent in English Exemplifies Breeze's safety culture, values, and mission Perks of the Job Health, Vision and Dental Health Savings Account with Breeze Employee Match 401K with Breeze Employee Match PTO Travel on Breeze and other Airlines too! Breeze Airways provides equal employment opportunities to all Team Members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Breeze Airways will never request your Social Security Number, Driver's License or Date of Birth on our job postings. Job Postings requesting any or all of this information should be regarded as a scam. To ensure you are applying to an actual Breeze Airways posting, please apply online at ***************** then click “Careers” at the bottom of the page.

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: Quality Inspector will perform in-process and 1 st article inspections, evaluate part to print specifications and understand the inspection methods used for inspection and support the manufacturing process and personnel, while adhering to the Quality Policy, AS 9100 requirements. Position reports to the Quality Manager and takes daily direction from the Inspection Supervisor. You will receive a 20% night shift premium. Essential Responsibilities: Strong blueprint and Geometric Dimensioning & Tolerance (GD&T) comprehension Able to use inspection tools, such as micrometer, indicators, comparator, etc Detailed to complete all paperwork, as required, including inspection reports Able to make mold casts to check ID dimensions Ability to identify dimensional and visual defects Able to understand and implement customer specifications and requirements Accuracy and attention to detail is highly important Experienced with completing 1 st article inspections, in-process inspections and final inspections Knowledge of aerospace specifications and requirements preferred. Perform other duties as required Qualifications: Proficient at reading blueprints Knowledge of dimensional symbols Ability to identify visual defects Ability to read micrometers, calipers and comparator Knowledge of measuring equipment Ability to work together for team effort Team oriented Organized and detail oriented Adherence to document control requirements Knowledge of various inspection reports General computer knowledge Ability to work without supervision Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Receiving Inspector Department: Quality Reports To: Receiving Inspector Supervisor FLSA Status: Non-Exempt Quality Indirect Working Hours: 7:00am - 3:30pm Responsible for receiving new and repaired hardware of various engine including GG3, GG4, GG8 and/or FT4/PT8 components as well as customer supplied materials in accordance with WGPW established methods and standard practices. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the Knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Essential Work Responsibilities include but are not limited to the following: Able to read, write and interpret information from a variety of areas such as job order instructions, vendor shipping orders, overhaul manuals, inspection records and vendor certifications. Working knowledge of a Window's based computer system. Ability to loo up and understand various Engine Manual sections including inspectors, repairs, and service bulletins. Able to use basic inspection gauges such as micrometers, dial bore gauges, indicators, vernier, and dial calipers. Enter data of parts being receiving into its appropriate inspection documents. Issue VSO's, travelers, routing tags as required for work to be performed. Receive in a variety of material from repair vendors and or from inventory on VSO's, packing slips and make appropriate entries into the applicable documents such as BX sheets. Perform job I. A. W. WGPW's application S. O.P.'s. Education Requirements: High school diploma or equivalent broad specialized training in the use of the GG3, GG4, GG8 and FT engine manuals or equivalent combination of education and experience. Core Competencies: Mathematical aptitude. Ability to solve practical problems using pre-existing standards. Ability to interpret a variety of instructions furnished in written and oral form. Must be familiar with WGPW ISO and EH&S standards. Physical and Environmental Demands: While performing the duties of this job, the employee is regularly to sit, stand, and use hands to handle parts. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, dept perception and ability to adjust focus. Work Environment: While performing the duties of this job, the employee may occasionally work with chemicals while signing in consumable materials for use on parts within the shop. Possible use of alcohol and/or cleaning agents for light cleanings of oils or dirt as parts are received in. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career - TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. * Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! * Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. * Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels - starting on your first day. To ensure the growth and development of our new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: As a Production Associate, you will work in a fun, team-oriented environment, operating production equipment and performing a variety of tasks. Your strong attention to detail and safety orientation would play a key role in producing printed circuit boards. We offer training for those that have never worked on printed circuit boards before. This position would generate and complete AS9102 reports. Duties and Responsibilities: * Generate and complete AS9102 reports by data entry, verifying blue print requirements for notes and dimensions. * Monitors and produces product quality by initiating actions to prevent the occurrence of product nonconformity, identifying and records any quality problems, initiating, recommending, and providing solutions, verifying the implementation of solutions, and controlling further processing delivery of nonconforming products until the deficiency has been corrected. * Responsibilities include the reporting of all accidents, near misses and safety concerns. Perform their job duties utilizing the required and appropriate personal protective equipment (PPE). Full participation in safety training and the ability to understand and follow the directions identified in Job Safety Analysis (JSA), PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts. Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Has good English communication skills and mathematical skills. * Has good reading vision, color discrimination, depth perception, and the ability to speak clearly. * Ability to perform routine tasks. * Must be a team player and must work well with others. * Must adapt to a changing environment. * Ability to work up to 10 hours a day and is flexible to work overtime when needed. * Able to lift up to 40 pounds, bending, leaning, sitting and/or standing for entire shift. * Flexible and able to cross train to work in any position throughout both buildings. * Ability to safely work or come in contact with chemical, physical (noise, etc) or biological agents. * Regular attendance is an essential job function of this position. * Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident. Education and Experience: High school diploma or GED is required #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Title: Dimensional Inspector (2nd Shift) Pay: $25 - $35 (DoE) + 15% shift Differential Zip Code: 06026 Job Description: 2+ years in aerospace environment Good mathematical skills Knowledge/Practical experience in aerospace environment Skills Desired: Strong attention to detail, ability to multitask, good communication skills Previous experience as an FAA Repairman with FAA Return to Service or Airframe and Powerplant Mechanic experience highly desirable Expert proficiency in the use of measuring instruments, i.e., various micrometers, verniers, swing, snap, and dial gauges, etc. Is your expertise different from the above? If you have a good attitude and a willingness to learn and new trade or skill, we want to hear from you. Apply today! Your Challenge: Perform a variety of duties to independently complete incoming, layout, first piece, in-process and final inspection of diversified turbine engine components being repaired Perform dimensional and visual inspections on turbine engine components Ensure quality detailed inspection follows all applicable manuals and technical data. Read and understand engine manuals, illustrated parts manuals and other technical data to perform receiving, basic, in-process and final inspection activities Operate computerized measuring equipment, train, and assist other inspectors as required with CMM Complete correct and concise documentation of compliance to requirements on organizational, customer and/or regulatory documents Perform a full spectrum of dimensional inspections of parts involving extremely close tolerances Education Requirements: High school diploma or equivalent required Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at ********************** Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Our QC Inspector supports Mativ's Sustainable & Adhesive Solutions Function. This individual will perform inspections and tests throughout the manufacturing process to ensure compliance with specifications under the supervision of Quality Engineering. The shift schedule is 6pm-6am. responsibilities: * Performs all auditing and testing of in-process, and finished goods to include Retain, Coat Weight, Cure and any additional testing as required by the Product Requirement Sheet, (PRS) or Tech 11. * Record and enter test results into the Scapa ERP System * Perform all manufacturing audits prior to production and at required intervals. * Maintain and organize product master files. * Coordinate shop floor QC testing based on daily and weekly production schedule. * Issue non-conformance report for any tested material that is out of specification. * Perform visual inspections of materials being coated and slit/converted and immediately inform coating/converting operators of any defects. * Interfaces with Quality Assurance and Production scheduling in the preparation and reviewing of slitting specifications. * Evaluates product quality based on product specifications and makes appropriate usage decisions. * Responsible for setting up test equipment. * Maintaining inventory of QC lab MRO items * Responsible for maintaining all related files and documents according to Good Documentation Practice, (GDP). * Assists in training new QA Inspectors and manufacturing personnel. * Participates as a team member in continuous improvement events. * Maintain QC test equipment and calibration status. * Assists quality engineers and quality technicians with gage R&R, and other validation activities. * Follows safety rules and keeps the work area in a clean and orderly manner. * Complies with company attendance policies. * Issue Supplier Complaints in the ICS, (Internal Complaint System), for nonconforming raw material. qualifications: Required * Minimum of 2 years' experience in Q. A. or Q. C. manufacturing environment. * High School diploma required, bachelor's degree highly preferred. * Familiar with basic measurements, test equipment and basic math skills. * Medical device industry experience preferred. * Ability to communicate and work within a team environment. * Fluency in English both verbal and written Preferred * 2 years' experience in Quality Assurance or Quality Control. * 2 years' experience in medical device or industrial manufacturing. * Associate degree in chemistry, physical sciences, or tech field. Relevant job experience may be considered in place of a 2-year degree. * Able to collaborate and work well with others. Position Demands Conditions are that of a manufacturing environment: * Air Temperatures can range from cold to hot. * The atmosphere may contain dust, fumes, and odors. * May include mechanical, electrical, chemical, explosive and radiation hazards. Employees are required to wear Personal Protective Equipment (PPE) including: * Safety shoes (steel toe or composite toe) * Safety Glasses * Bump Caps * Protective Gloves, when performing certain tasks * Hearing Protection, when required. * Other personal protective equipment as required for certain tasks. While performing the duties of this job the employee must meet the physical demands: * Be able to lift a minimum of 50 pounds. * Be able to work 12-hour shifts. * Perform repetitive tasks. * Routinely stand, sit, hear, walk, and talk. * Reach, climb, bend, kneel, crouch, twist, and balance, sometimes in awkward or tight spaces. * Have good close vision, depth perception, and the ability to focus. WHAT WE OFFER At Mativ, our benefits reflect how much we value and care for each other. We know that employees and their families have unique needs, so our comprehensive benefits offer flexibility, quality, and affordability. Here are just a few of the ways we support your well-being and that of your loved ones: * Medical, dental and vision insurance * Consumer-Driven Health Plan (CDHP) * Preferred Provider Organization (PPO) * Exclusive Provider Organization (EPO) * Company-paid basic life insurance and Additional voluntary life coverage * Paid vacation and competitive personal time off * 401(k) savings plan with company match * Employee assistance programs - available 24/7 to you and your family * Wellness and Work Life Support - career development and educational assistance ABOUT MATIV Mativ Holdings, Inc. is a global leader in specialty materials headquartered in Alpharetta, Georgia. The company connects, protects, and purifies the world every day through a wide range of critical components and engineered solutions that solve our customers' most complex challenges. We manufacture on three continents and generate sales in nearly 100 countries through our family of business-to-business and consumer product brands. The company's two segments, Filtration & Advanced Materials and Sustainable & Adhesive Solutions, target premium applications across diversified and growing end-markets, from filtration to healthcare to sustainable packaging and more. Our broad portfolio of technologies combines polymers, fibers, and resins to optimize the performance of our customers' products across multiple stages of the value chain. Our leading positions are a testament to our best-in-class global manufacturing, supply chain, and materials science capabilities. We drive innovation and enhance performance, finding potential in the impossible. Mativ and its subsidiaries are Equal Opportunity Employers. Qualified applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Do you have the eye for detail and a commitment to excellence? If so, we want you to be part of our dynamic Wax team at Groton. At Doncasters we have an exciting opportunity for a Wax Inspector to join our team in Groton, Connecticut! Hours - 2 nd shift - 2:30pm to 11pm, training on 1 st shift 6am to 2:30pm. Salary - The trainee hourly rate is $18.19, there is quick development and once trained you will move to $19.40. Training and Development - Doncasters prides itself on investing in their employees. You will receive extensive training while working within an experienced team. You will receive continuous feedback to help you grow and develop to ensure you maximize your potential. Why join us? Did you know that every time you take a flight, drive somewhere, or switch on a light, there's a chance Doncaster's played a part in making that happen? As a leading international manufacturer of specialist superalloys and high-performance alloy components, we provide critical solutions to some of the world's most demanding industries, including aerospace, Industrial Gas Turbines, automotive, medical, and other specialist sectors. With a heritage spanning nearly 250 years, we've built a global reputation for technical excellence, innovation, and engineering that performs where it matters most. Today, we operate across 20 sites worldwide, employing almost 3,000 professionals. This includes engineers and production teams to HR, marketing, and other support functions, who are united by a shared sense of purpose. At Doncaster's, we believe in doing things the right way. That means acting with integrity, delivering with commitment, and working as one team to achieve more, together. Whether you're developing precision-engineered components, running world-class manufacturing operations, or supporting our people and processes, your role is part of something much bigger. Join us and contribute to a legacy built on performance, precision, and the values that drive us forward - excellence, commitment, teamwork, and integrity. What we can offer you: - An interesting and varied field to work in. - An environment where you can learn and grow through constant development opportunities. - PTO - Competitive 401K - Competitive medical insurance The Role As a Wax Inspector, you'll bring precision to life! Operating wax presses to craft flawless patterns with a keen eye for quality. This hands-on role demands skill, dexterity, and sharp attention to detail, perfect for those who thrive on craftsmanship and precision. Interested? If you have any of the below skills, we would love to talk to you about your next career move: High school and/or technical school completion. Experience working within a manufacturing environment or a role where quality is at the forefront of what you do is advantageous. Attention to detail, problem solving and teamwork skills. To Apply Apply online. We'll be in touch with you quickly after receiving your application. Equal opportunities Doncasters is committed to achieving workforce diversity and we pride ourselves on creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, national origin, race, age, sex, gender identity, disability- physical or hidden, sexual orientation, veteran status, religious belief, or any other characteristics protected by law. We provide a fully inclusive and accessible recruitment process. We encourage all applicants to reach out if they require any support or accommodations to enable them to thrive throughout our recruitment process. Please contact ********************** .

The QC inspector is responsible for ensuring that all products meet quality standards. This includes inspecting raw materials used in the production process, conducting tests on finished products and performing audits to identify potential areas of improvement. The QC inspector must be knowledgeable of the relevant safety regulations and have excellent attention to detail and problem-solving skills. Essential Functions * Responsible for individual Inspection activities * Undergo training when necessary * Adhere to policies and procedures related to specific customer requirements * Ability to understand specific directions and follow guidelines that are common throughout the department * Ability to maintain a constant focus on quality and accuracy * Ability to work with minimal supervision * Specific competencies include but are not limited to following the Gowning, Personal Hygiene Procedures, and all other QC Inspection Work Instructions and SOPs including formatting Excel if required, Use of inspection equipment (Bench Linc, Vision Systems, Tensile Tester, Pin Gages, Ring Gages, Calipers, rulers, and Customer supplied fixtures) Perform Visual Inspection (using Tappi Chart) and Feel Testing. Operating the Annealing Ovens * Obey all safety rules, use caution in work activities, and continuously practice safe behaviors * Immediately report unsafe conditions/behaviors and work-related injuries to site supervision Qualifications Preferred * High school diploma or equivalent * 1 year of Product Operator experience necessary * Experience within the department must be gained within 90 days for use of specific measuring equipment, displaying an understanding of the job requirements and any devices required to complete inspection/test activities * Understand Quality Management System (QMS) requirements * Training on the specific equipment must be fully completed within 90 days of hire * Equivalent combination of education and experience is preferred An Affirmative Action / Equal Opportunity Employer Proterial Cable America, Inc. provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. As a Federal Contractor, we encourage priority referral of protected veterans under VEVRAA.