Inspector jobs in Middletown, NY

Shift: Day Shift Job Function: The Quality Inspector is responsible for the accurate inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts and assemblies. Undergoes and carries out acquired training across various operational functions throughout the scope of the Inspection Dept., proactively improving the capability and capacity of operations. This position reports to the Quality Inspection Supervisor. Primary Responsibilities: * Confirm specifications, conducting visual and measurement tests in accordance with standard operating procedures. * Reject parts and assemblies that fail to meet specifications in accordance with standard operating procedures. * Measure parts with calipers, gauges, or micrometers. * Perform inspections in accordance with technical documentation. * Operate electronic inspection equipment and software. * Document inspections by completing required logs and forms. * Input data into electronic quality database. * Assist in maintaining measurement equipment by following operating instructions and calibration requirements; report repairs according to departmental instructions. * Follow all standard operation procedures. * Adhere to AS9100 and other quality standards. * Assist supervisor/manager, as needed, with various audits and compliance projects. * Report quality concerns to supervisor and/or management personnel. * Maintain safe and healthy work environment by following standards and procedures and complying with legal regulations. * Actively participate in training across prescribed Inspection functions, thereby fostering increased efficiency and product conformance. * Support departments in the day-to-day production of parts and assemblies. * Perform other duties and projects as assigned. Requirements: * Must have High school diploma or equivalent- documentation required * Must have basic math skills * Must meet ITAR definition of US Person(s)- documentation required * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to accurately and effectively perform assigned tasks and interpret results of inspections * Ability to meet critical deadlines and work in fast-paced environment * Basic computer knowledge; interfacing in PC environment * Attention to detail and strong analytical skill * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Work independently with minimal supervision * Ability to perform overtime when necessary * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Rate: $18- 20 Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to remain stationary; sit for long periods of time, use hand to finger, handle, feel, stand, move throughout the facility, and reach with hands and arms. The employee is occasionally required to traverse stairs, climb or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift, and/or position materials up to 15 pounds and occasionally lift and/or move up to 50 pounds with or without assistance. Work in manufacturing environment and use of computer (typical 2-button scroll mouse and keyboard - 35% of the work day). Specific vision abilities are required by this job include close vision, depth perception, and the ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting Job #**********NY to ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

The NSPIRE Inspector schedules and performs inspections on rental units to ensure safe, affordable, and qualified rental housing for Housing Choice Voucher Program participants. This position will follow a standard inspection checklist to ensure exteriors and interiors of rental units meet all the requirements of program participation. Essential Functions Assist qualified low-income individuals, families, elderly, the disabled, handicapped, and homeless to secure affordable housing and improved living conditions with the goal of an improved quality of life and self-sufficiency. Preform inspections on rental units using the Housing and Urban Development (HUD) inspection checklist. Enter into homes and apartments of assigned areas to preform inspections of building exteriors and unit interiors. Inspect rental units to ensure properties are compliant with HUD guidelines including: testing outlets, opening windows, checking heating and air systems, checking functionality of appliances, and checking for leads and mold. Preform inspections on units before expected deadlines. Accurately process Rent Reasonableness monthly within the required timeline. Negotiate contract rents with landlords. Determine unit eligibility within HUD guidelines. Communicate with landlords and participants on complaints and decide steps for program inspection compliance. Notify landlords and tenants in writing of any needed repairs and make recommendations for termination of rental assistance checks to landlords. Perform pre-construction and interim inspections for units that are undergoing reconstruction or remodels. Perform 100-200 inspections monthly (annuals, Initials, moves, re-inspections, and specials). Negotiate, within program guidelines, with landlords to house eligible families. Correspond with families, landlords, code enforcers and agency affiliates to ensure compliance at all levels. Accurately process computer data entry according to program specifics. Maintain required records and prepare required reports monthly. Demonstrate knowledge of HUD rules and regulations, program procedures, and forms. Escalate landlord and participant issues to supervisor as necessary. Exercise appropriate confidentiality in all aspects of work Other Duties Represent PathStone at meetings, conferences and other relevant forums concerned with issues affecting the operation of housing services programs. Complete daily/weekly/monthly reporting as required. Educate participants about their program rights and housing information. Other duties as assigned. Education and Experience High school diploma or equivalent required. Associates degree or higher preferred. NSPIRE Inspector Certification required within one year of employment (organization supported). Minimum 3 years of experience with specific training in housing management, construction, insurance inspections, real estate inspections, or code enforcement. Experience with basic plumbing, basic electrical, basic HVAC experience preferred. Knowledge, Skills, and Abilities Working knowledge of computers including Outlook, basic Excel, and Word required. Communication skills including bilingual ability strongly desired. Problem-solving skills to find effective solutions for a variety of issues. Excellent customer service and interpersonal skills to interact with stakeholders. Strong written and verbal communication skills which demonstrate the ability to interpret, clarify, and advise on program regulations and participant obligations. Attention to detail to ensure definitions are property cited. Autonomy to make decisions regarding their own work and participant related interactions. Ability to follow prescribed steps/methods/procedures, understanding the need to make alterations based on the situation. Must demonstrate ability to review and process information to determine what it means, how it fits together and how to respond to it. General knowledge of HVAC, plumbing, electrical, appliances, and building exteriors. Physical Demands and Work Environment Flexible work hours including evenings and weekends. Work includes both inside and outside environments. Must be able to work in various elements. Must be able to enter homes with exposure to various conditions, such as entering unfinished basements, older homes with stairs, or homes with lead-based paints. Driving is routinely required for some locations. In these instances, the organization will provide transportation during work hours. • Ability to walk properties. • Must be able to sit and stand for extended periods. • Must be able to lift 20-25 pounds. • Exposure to diverse communities including low-income neighborhoods. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Transportation Requirement Position requires automobile, driver's license and insurance. Last Updated: 04/07/2025

Join Mercury and become part of our world-class Quality team that supports the American warfighter on the battlefield, saving lives and defending democracy worldwide. As a quality inspector, you will ensure that our products deliver flawlessly every time, in the heat of battle giving our troops the winning edge when it matters most. You will be utilizing the requirements of IPC Industry Standards to ensure that the quality of our products meets the high demand of our end users. You will ensure optimal product quality by performing in-process visual verification of electronic assemblies, providing real-time feedback to operators, and documenting discrepancies accordingly. Job Responsibilities: Supporting Incoming, in-process and final inspection including customer source inspections Obtaining and upholding IPC credentials required of the position. Ensuring quality at a production line level by incorporating spot-inspection, sampling, and 1st-piece verification and 100% inspection as required. Verifying compliance of in-process material against Customer and Industry Standards Ensuring documentation is accurately recorded and collected. Escalating systemic issues to Quality and Manufacturing Engineering Supporting first-piece verification runs with accompanying documents. Documenting non-conformities to the process and specifications Initiating regular quality line-audits to ensure all documentation, consumables, and tooling are within check. Advocating proper ESD, PPE, and FOD prevention Required Qualifications: Typically requires 3+ years of experience in quality assurance of electro-mechanical inspection in a manufacturing environment J-STD-001 Class 3 and/or IPC 610 certified Physically able to spend up to 8 hours a day using a microscope Familiarity with IPC Industry Standards High-School Diploma Preferred Qualifications: Experience working in an ISO-9001 and/or AS9100 Quality System environment Operating appropriate inspection equipment; (AOI, XRAY, etc.…) Ability to communicate openly and effectively to provide real-time feedback Ability to work in a fast-paced team environment Customer-Focused, "Zero-Defect" Mindset Documentation Abilities Computer literacy Industry-Relevant Quality Inspection or Control experience Willingness to cross train in multiple Quality areas This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.

We are seeking a detail-oriented and experienced Quality Inspector to join our team at our custom rubber manufacturing facility. The ideal candidate will be responsible for ensuring that products meet specified quality and reliability standards through inspections, measurements, and testing. This role requires a solid understanding of mechanical drawings, measurement tools, and quality control processes. -Salary range- $22.00per hour- $25.00 per hour -Benefits: 401(k) Aflac Dental insurance/ Vision insurance Health insurance reimbursement Life insurance Paid time off -Full Time- 8am to 4:30pm, Monday-Friday Responsibilities Interpret engineering drawings, schematic diagrams, and technical documentation to determine quality and reliability standards. Collaborate with management and engineering teams to address quality concerns and establish inspection criteria. Compile and evaluate statistical data to monitor and maintain product quality and consistency. Conduct in-process and final inspections of rubber products using precision measuring instruments (e.g., calipers, micrometers). Document inspection results, report non-conformances, and assist in root cause analysis and corrective actions. Validate data or flag deviations from standards through reports and quality documentation. Maintain accurate records of inspections and test results. Ensure compliance with company and industry quality standards and safety regulations. Qualifications Qualifications: High school diploma or equivalent required; additional technical training or certifications in quality inspection preferred. Minimum 2 years of experience in a manufacturing or quality inspection role, preferably in the rubber industry. Ability to read and interpret mechanical and engineering drawings. Proficient with measuring tools such as calipers, micrometers, and other gauges. Strong math and analytical skills. Computer literate: familiarity with MS Office and quality management systems is a plus. Excellent attention to detail, communication, and documentation skills. Ability to work independently and in a team environment. Physical Requirements: Must be able to stand for extended periods and lift up to 50 lbs. Manual dexterity for operating measurement tools. Ability to work in a manufacturing environment with exposure to noise, machinery, and rubber materials. Company Website *********************************

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: Responsible for the Quality Inspection and Testing of Aircraft, Military, and Industrial Gas and Oil production Equipment. Collect and report data to be presented to the customer for reporting purposes. The Quality Technician is responsible for providing inspection and administrative support in order to ensure that all general matters in Quality are handled timely and efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Quality Technician is a hands-on representative of the Quality department whose job is to help ensure all basic visual and test inspections are performed to ensure product integrity and compliance to all specifications at the production facilities. Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits). Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s). Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives. Support generation of FAI and corresponding documentation. Review incoming FAI to ensure compliance to Collins and AS9102 standards. Any other function(s) as assigned by management Maintain calibration records Maintain tools Perform other related duties as assigned. Qualifications You Must Have Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract MSOffice skills Knowledge of GD&T PHYSICAL DEMANDS: Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. May be exposed to uncontrolled environmental conditions. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

The Inbound Inspector is responsible for the inbound inspection for all endoscopes returned to the facility for service and/or repair. Performs initial inspection, defines the necessary repairs and lists the parts and components needed to complete the repair process. Works on all models of Loaner/Demo and Customer scopes. Company Overview At FUJIFILM Healthcare Americas Corporation, we're on a mission to innovate for a healthier world, and we need passionate, driven people like you to help us get there. Our cutting-edge healthcare solutions span diagnostic imaging, enterprise imaging, endoscopic and surgical imaging, as well as in-vitro diagnostics. But we don't stop at healthcare; our Non-Destructive Testing (NDT) team harnesses advanced radiography solutions to keep transportation infrastructure, aerospace, and oil and gas assets safe and running smoothly. Ready to innovate, collaborate, and make a difference? Join us and bring your big ideas to life while working in a dynamic, flexible environment that fuels your creativity and drive. Our headquarters is in Lexington, Massachusetts, an inspiring healthcare research hub in a historic town. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Duties and Responsibilities: * Efficient with computer software necessary to perform duties of the job. * Performs initial inspection, defines the necessary repairs and lists the parts and components needed to complete the repair process. * Provides input and guidance on technical issues. * Adheres to all safety policies and procedures. Operates required equipment in a safe manner following established safety rules, maintains a neat and clean work area, follows established tool and instrument control procedures, and reports any unsafe acts or conditions to immediate supervisor. * Other duties as required * Comply with all applicable U.S. Food and Drug Administration (U.S. FDA) medical device regulatory requirements, applicable ISO 13485 standard requirements and all other applicable laws, regulations and standards. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential tasks. * Electronic and/or Mechanical Cert or degree desired, but will consider experience or demonstrated skill in electronics/mechanical repairs in place of degree. * Electronic and mechanical skills required. * Solder skills and experience required. * Must be able to read and understand schematic drawings and wiring diagrams. * Must follow instructions and apply to real situations in a very quick manner. * Reach monthly targets on a consistent basis. * Ability to meet and/or exceed deadlines. * Able to professionally communicate with internal and external customers. * Able to investigate and resolve discrepancies. * Ability to research and analyze various different types of information. * Ability to prioritize work. * Ability to read, analyze, and interpret essential job related documents. * Expert in identifying all components of Fujifilm endoscopes. * Expert in endoscope failure analysis procedures. * Expert in using special endoscope repair tools and test jigs. * Expert with parts specifications and cross-referencing procedures. * Expert with mechanical drawings and assembly procedures. * Expert with tools and calibration equipment and their standard usage. Physical Requirements: The position requires the ability to perform the following physical demands and/or have the listed capabilities: * The ability to sit up 75-100% of applicable work time. * The ability to use your hands and fingers to feel and manipulate items, use electronic or mechanical repair devices, fine motor skill dexterity, and keyboard use, up to 100% of applicable work time. * The ability to stand, talk, and hear. * Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. * The ability to lift and carry up to 30 lbs. Travel: * 0% Travel may be required based on a business need FUJIFILM is an equal opportunity and affirmative action employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, gender identity, sexual orientation, religion, disability, protected veteran status or any other characteristic protected by applicable federal, state or local law. Salary and Benefits: * $23.49 - $27.09 (depending on experience) * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off Applicants to positions where vendor credentialing or other similar requirements exist to enter facilities will be required to comply with the credentialing requirements of the facilities, including complying with vaccine requirements. For all positions, the Company encourages vaccination against COVID-19 and requires that the successful candidate hired be willing to test for the COVID-19 virus periodically and wear a face covering indoors as required, absent being granted an accommodation due to medical or sincerely held religious belief or other legally required exemption. In compliance with the ADA Amendments Act, should you have a disability that requires assistance and/or reasonable accommodation with the job application process, please contact the Human Resources department via e-mail at ******************************. Additionally, the affirmative program/plan is available for review upon formal request by employees and applicants for employment in the Human Resources office during regular office hours. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (****************************** or ***************.

About the Firm: Our mission: Transforming infrastructure with passion and kindness. We provide quality, cost-effective engineering services to state and local governments and private-sector clients across New York State and Pennsylvania. Our portfolio includes bridge, highway, and structural design; condition and safety inspection; civil and site engineering; construction inspection and administration; survey and mapping; and hydrographic services. What you'll be able to do: We are seeking a NICET III Construction Inspector with bridge replacement experience for a project in Poughkeepsie, NY. This position is available immediately. The Senior Inspector will be responsible for overseeing and documenting construction activities to ensure compliance with project plans, specifications, and applicable regulations across all stages of construction. The minimum requirements we seek: NICET III certification or equivalent experience. Prior New York State DOT and/or New York State Thruway inspection experience or similar experience working on bridge construction projects. Proficiency in computer aided project administration is preferred. A bachelor's degree in civil engineering, construction management, or a related field is preferred. Relevant work experience may be considered in lieu of a degree. OSHA 10 certification & knowledge of safety procedures and practices related to construction sites. Valid driver's license and ability to travel to and throughout active construction sites What we offer: Senior Inspector Level III 107,000 salary* Medical, dental, and vision insurance 401(k) with company match Paid time off and paid holidays Unlimited opportunities for professional growth Prudent Engineering is an Equal Opportunity Employer. *Actual compensation may vary based on work experience, location, market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills.

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Ulster Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Job DescriptionBenefits: Paid time off We specialize in the manufacturing of tight tolerance medium to complex aerospace components and assemblies. We are AS9100D. Qualifications Minimum 2-5 years experience in manufacturing / job-shop environment Solid working knowledge with: blue print reading, inspection instruments, tolerancing, GD&T, etc Knowledge of Mitutoyu MiStar 555 desired. The ability to multi-task while accurately performing in-process and final inspections on CNC manufactured parts is a must Experience inspecting close tolerance parts (.001 to .0005) using inspections tools such as micrometers, linear height gage, CMM, depth mics, etc Perform job responsibilities according to internal process specifications and third-party requirements Utilize proper PPE, safety equipment, and follow safety procedures Assist support functions in root cause analysis Must be able to multi-task and work within deadlines Proactively work to improve efficiency and quality of products Use manual and automated measuring / testing equipment to assure product quality Cross-train with employees as needed based upon knowledge and experience Compliantly complete all written and/or electronic labor tracking documentation Report problems to appropriate resource and/or Coach Keep all shift operators informed on special problems involving operation or set up Communicate with team to ensure all team members are aware of product deficiencies, new processes, or issues Provide feedback to appropriate support functions Assist leading and support team initiatives We are constantly growing and always on the look-out for both experienced candidates and those looking to learn the trade. If you are a CNC programmer or operator, manual machinist or toolmaker, or you are just looking to get into the trade, please send us your resume.

General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities * Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. * Conduct in-process inspections at specified intervals to monitor quality and verify requirements. * Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. * Accurately record inspection results in logs, check sheets, or digital systems. * Complete First Article Inspection Reports (FAIRs) as required. * Communicate non-conformances promptly to machinists, supervisors, or the quality manager. * Work closely with machinists, programmers, and setup personnel to validate machine setups. * Provide feedback to promote continuous improvement. * Ensure inspection activities comply with company standards and ISO/AS requirements. * Support calibration and proper use of inspection tools. * Maintain adherence to safety protocols and 5S practices. * Ability to detect deviations and recommend corrective actions. * Identifies potential quality risks before they become issues. * Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required * High school diploma or equivalent. * 2+ years of experience in machining, manufacturing, or inspection environment * Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) * Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) * Ability to read and interpret blueprints and technical specifications * Strong attention to detail and problem-solving skills * Good written and verbal communication skills * Experience with ISO 9001, AS9100, or similar quality management systems * Familiarity with statistical process control (SPC) * Knowledge of ERP/MRP systems or digital quality management tools. * Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements * Ability to stand, walk, or sit for extended periods. * Ability to lift to 50 lbs. occasionally. * Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

Job Description General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. Conduct in-process inspections at specified intervals to monitor quality and verify requirements. Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. Accurately record inspection results in logs, check sheets, or digital systems. Complete First Article Inspection Reports (FAIRs) as required. Communicate non-conformances promptly to machinists, supervisors, or the quality manager. Work closely with machinists, programmers, and setup personnel to validate machine setups. Provide feedback to promote continuous improvement. Ensure inspection activities comply with company standards and ISO/AS requirements. Support calibration and proper use of inspection tools. Maintain adherence to safety protocols and 5S practices. Ability to detect deviations and recommend corrective actions. Identifies potential quality risks after they become issues. Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required High school diploma or equivalent. 2+ years of experience in machining, manufacturing, or inspection environment Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) Ability to read and interpret blueprints and technical specifications Strong attention to detail and problem-solving skills Good written and verbal communication skills Experience with ISO 9001, AS9100, or similar quality management systems Familiarity with statistical process control (SPC) Knowledge of ERP/MRP systems or digital quality management tools. Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements Ability to stand, walk, or sit for extended periods. Ability to lift to 50 lbs. occasionally. Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

Job DescriptionDescription: The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications. Reads written specifications or receives oral instructions and determines work aids required and inspection procedures. Measures wire/cable for size, and defects using micrometers and fixed gauges. Examines wire for defects, such as pits, scratches, and burnt surfaces. Records test results and informs supervisor when wire varies from specifications. Respools cables according to customers specification and perform final inspections of spools. Any other duties as assigned by supervisor. Requirements: Six months to one year of work experience is preferred. Demonstrates ability to self-motivate and to problem solve in a fast-paced setting. Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Must be capable and willing to share knowledge and train associates. Ability to analyze data and make recommendations. Ability to troubleshoot manufacturing defects. Strong interpersonal skills. Ability to seek and accept feedback from others. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent Working conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles The noise level in the work environment is usually moderate. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

Medical device manufacturing company is seeking a Quality Control Inspector. Hours are 2nd shift: Monday - Thursday 4:15pm- 2:45am, Friday 2:30pm - 10:45pm. This position is eligible for RJ-Staffing bonus pay while temp, and if hired permanently, company offers health, dental, vision, PTO, and retirement. Responsibilities: -Cleanroom inspections -Ensure instructions follow company policy and customer specifications -Quality Control Inspection of products according to applicable Company instructions -Completion of quality control documentation as defined by Company instructions -Immediate reporting of all non-conformances observed as well as any compromises to quality to Quality Assurance Management, including the creation and approval of Internal Reports and Dispositions as required -Provide quality leadership to laminator team -Verification and approval of product labeling as required by Company instructions -Verification of Line Clearance activities as defined by applicable instructions -Sampling according to the Company sampling plans and instructions -Conduct process verification activities throughout the production line (from lamination through retail box packaging) as defined by Company documentation -Inform Laminator Operator and/or Supervisor of observed process deficiencies and product defects or abnormalities -Report on the quality performance as required by management -Verify and approve the in-line print, label, or sticker as instructed in the Test Specification -Utilize IQS system to confirm appropriate documentation and initiate changes of documents through the system as necessary -Utilize Epicor system as required for inventory management of products and materials -Perform sample inspection for the validation of new customers or R&D products, including machine tooling validation as assigned by Supervisor or Manager -Assist in cleaning of the production area and equipment as assigned by the Supervisor -Verify job material requirements brought into the clean room. -Perform additional duties as assigned by your Supervisor or Manager

Hudson River Housing improves lives and communities through housing with compassion and development with vision. We are dedicated to building strong, sustainable communities by developing and preserving quality affordable housing and helping families and individuals obtain and maintain housing through education, advocacy and support services. We are a committed group of people from all backgrounds who care deeply about our community and want to make it a better place. Position: Property Protection General Description: The Property Protection/Security position will provide additional support to staff and will monitor residents, visitors, staff, physical plant and property. He/She will provide continuous on foot monitoring of all grounds, both inside and outside of the buildings and around the perimeter of the properties. Property Protection will become the on-site contact person in the event that Police, Fire or EMS needs to be dispatched to any facility. Property Protection will be responsible for all written accounts of incidents during scheduled hours. This position does not require the carrying of a firearm or a NYS Security License Principal Duties: Conduct continuous “on-foot” monitoring of all of the grounds, both inside buildings and outside perimeter of the property. It is imperative to maintain a safe and secure environment for both the residents of the site as well as HRH staff and volunteers. Property Protection staff are expected to perform the following duties: Physically check vacant rooms at least 2x per night, verify that emergency exit doors are secured, windows on the ground floor are closed and/or secured throughout the night, kitchen facility is locked and secured, laundry rooms are closed, smoking rules are being adhered to, noise violations are addressed, non-approved visitors are escorted off grounds, report suspicious vehicles on grounds overnight, report and/or attend to any slip hazards identified, etc…. Rules and policies are to be enforced in a compassionate and human manner. Ultimately, the safety of all guests, staff and volunteers must be a primary concern. Provide assistance to other on-site staff when unusual sightings are observed or situations present themselves. All suspicious activity must be checked out. Call local police when necessary to assist with conflicts that might occur. Property Protection should never attempt to act in a situation that could be deemed dangerous. Property Protection will become the contact person when the police arrive on the scene. An accurate account of all incidents will be recorded on an HRH Incident Report Form and submitted for appropriate signatures. Any incident that requires that the police, fire department, CPS or other governmental agency be called should be documented. In addition, any on-site incident that could be perceived as an altercation, major violation of rules, disturbance or questionable behavior should be documented by property protection staff. A daily/nightly log should be kept to record all rounds that are done and any notable actions that are taken. It may be necessary from time to time for the Property Protection staff to fill in for routine tasks normally assigned to the Front Desk in the event that a staffing shortage cannot be avoided. Other duties may be assigned by supervisory staff or HRH Administrative staff. Secondary duties: Must demonstrate sensitivity toward the Program's target population, and ability to comfortably and effectively relate to individuals of diverse backgrounds, and be respectful of cultural differences. Must be responsible, non-judgmental, and able to work independently and as part of a team. Must have a strong commitment to personal and professional ethics and standards and be able to set and maintain appropriate boundaries with program participants. The position requires the ability to stand on your feet for long periods of time as well as climb stairs multiple times throughout the night. Must be able to react quickly and effectively in a crisis situation. This position requires a criminal background check in accordance with applicable state and federal regulations The position also requires the ability to drive to multiple program sites and properties as needed. Qualifications: Experience: Prior experience dealing with emergency and/or crisis situations. Education: A variety of educational experiences and skill sets will be considered for all positions. Licensing/Certification Requirements: Valid NYS Driver's License. Valid/current NYS Security License is helpful but is not required . Salary: $18.00 per hour Location: Poughkeepsie, NY Immediate Supervisor: Security Manager Equity is a core value at Hudson River Housing. We believe in promoting a culture that decenters bias, celebrates difference, enhances equitable communication, and nurtures relationship building. It is important to us that community members have access to stable means of economic growth. We are continually committed to hiring from within our community including applicants with lived experience that can inform and strengthen our work. Hudson River Housing is dedicated to maintaining a work environment that is free from harassment and discrimination on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, gender identity or expression, sexual orientation, pregnancy (including childbirth and related medical conditions), alienage or citizenship status (unless required by law), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), or any other protected status under federal, state, or local laws. Hudson River Housing is dedicated to the fulfillment of this policy with respect to all aspects of employment, including, but not limited to, recruiting, hiring, placement, transfer, training, promotion, compensation, termination, and all other terms, conditions, and privileges of employment.

Shift: Night Shift Job Function: The Quality Inspector is responsible for the accurate inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts and assemblies. Undergoes and carries out acquired training across various operational functions throughout the scope of the Inspection Dept., proactively improving the capability and capacity of operations. This position reports to the Quality Manager. Primary Responsibilities: * Confirm specifications, conducting visual and measurement tests in accordance with standard operating procedures. * Reject parts and assemblies that fail to meet specifications in accordance with standard operating procedures. * Measure parts with calipers, gauges, or micrometers. * Perform inspections in accordance with technical documentation. * Operate electronic inspection equipment and software. * Document inspections by completing required logs and forms. * Input data into electronic quality database. * Assist in maintaining measurement equipment by following operating instructions and calibration requirements; report repairs according to departmental instructions. * Follow all standard operation procedures. * Adhere to AS9100 and other quality standards. * Assist supervisor/manager, as needed, with various audits and compliance projects. * Report quality concerns to supervisor and/or management personnel. * Maintain safe and healthy work environment by following standards and procedures and complying with legal regulations. * Actively participate in training across prescribed Inspection functions, thereby fostering increased efficiency and product conformance. * Support departments in the day-to-day production of parts and assemblies. * Perform other duties and projects as assigned. Requirements: * Must have High school diploma or equivalent- documentation required * Must have basic math skills * Must meet ITAR definition of US Person(s)- documentation required * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to accurately and effectively perform assigned tasks and interpret results of inspections * Ability to meet critical deadlines and work in fast-paced environment * Basic computer knowledge; interfacing in PC environment * Attention to detail and strong analytical skill * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Work independently with minimal supervision * Ability to perform overtime when necessary * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Rate: $18-$20/Hour + 10% shift differential Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to remain stationary; sit for long periods of time, use hand to finger, handle, feel, stand, move throughout the facility, and reach with hands and arms. The employee is occasionally required to traverse stairs, climb or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift, and/or position materials up to 15 pounds and occasionally lift and/or move up to 50 pounds with or without assistance. Work in manufacturing environment and use of computer (typical 2-button scroll mouse and keyboard - 35% of the work day). Specific vision abilities are required by this job include close vision, depth perception, and the ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting Job #**********NY to ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. This post will expire on Tuesday December 30th, 2025

COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: Responsible for the Quality Inspection and Testing of Aircraft, Military, and Industrial Gas and Oil production Equipment. Collect and report data to be presented to the customer for reporting purposes. The Quality Technician is responsible for providing inspection and administrative support in order to ensure that all general matters in Quality are handled timely and efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Quality Technician is a hands-on representative of the Quality department whose job is to help ensure all basic visual and test inspections are performed to ensure product integrity and compliance to all specifications at the production facilities. Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits). Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s). Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives. Support generation of FAI and corresponding documentation. Review incoming FAI to ensure compliance to Collins and AS9102 standards. Any other function(s) as assigned by management Maintain calibration records Maintain tools Perform other related duties as assigned. Qualifications You Must Have Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract MSOffice skills Knowledge of GD&T PHYSICAL DEMANDS: Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. May be exposed to uncontrolled environmental conditions. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.

Full-time Description The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications. Reads written specifications or receives oral instructions and determines work aids required and inspection procedures. Measures wire/cable for size, and defects using micrometers and fixed gauges. Examines wire for defects, such as pits, scratches, and burnt surfaces. Records test results and informs supervisor when wire varies from specifications. Respools cables according to customers specification and perform final inspections of spools. Any other duties as assigned by supervisor. Requirements Six months to one year of work experience is preferred. Demonstrates ability to self-motivate and to problem solve in a fast-paced setting. Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Must be capable and willing to share knowledge and train associates. Ability to analyze data and make recommendations. Ability to troubleshoot manufacturing defects. Strong interpersonal skills. Ability to seek and accept feedback from others. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent Working conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles The noise level in the work environment is usually moderate. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Rockland Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position