Inspector jobs in New Fairfield, CT - 129 jobs

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Quality Control Inspector Location: Naugatuck, CT Department: Quality Shift: First Shift 6am - 2:30pm JOB SUMMARY QC Stamping Inspector's primary function is the quality evaluation through gauging and inspection to validate the acceptability of stamping production, the capture of nonconforming product and the documenting of that acceptability. Evaluation is conducted as specified through provided gauging and inspection standards. QC Stamping inspectors also provide general “Quality” training, support and guidance to Stamping Department Personnel ESSENTIAL FUNCTIONS Gather samples from each stamping press twice per shift, performs visual and dimensional inspection, recording dimensional results in Mongoose (stamping inspection system of record) as well as on the Stamping Inspection Shift Report (excel file) Conduct proper defect containment, inform the Press Operators of any defects identified, as well as Set-Up personnel, Toolmakers, Tooling Engineer and/or Stamping Dept. Manager as applicable. Record actions (i.e. scrap, hold, etc..) on the Stamping Inspection Shift Report Receive QC LAB (also receiving inspection group) anodizing report, as well as supporting defect samples and address quality issues specified in their report Conduct “outgoing” (from stamping) skid audits for product from presses identified by the Stamping Q.E. Report data as specified Provided training to Stamping Department personnel as a qualified TWI trainer (Includes but not limited to developing TWI instructional break downs, providing individual training for TWI, documenting & tracking provided training, auditing TWI tasks as indicated by management) For Start-up ensure that proper documentation and standards are at each press (gauge plan, part drawing, skid tags, skid labels, and standard boards) Perform “Start-Up” inspection using applicable gauge plan, applicable standard boards and past start-up retains. Record all results on Stamping Inspection Report Maintain “Start-Up Retains Bank” located in the Toolmaker work area. As startups are approved, one raw and one anodized sample from the Start-up will be marked with the approval date and placed in the appropriate bin to be referenced on future start ups At the beginning of each shift Stamping Q.C. Inspectors will review each press and ensure correct labels, gauge plan, part drawing and correct skid tags are being used Keep Department QC Stations and/or QC Work Areas orderly at all times. Double check to make sure proper prints, gauging and inspection plans are at each press and in the QC areas as assigned. Inspect and report inspection results for New Product Development (NPD) by completing the applicable Stamping Quality portion of the First Piece Submission Routing Form Any other duties that may be assigned, including data entry, QC checks on discrepant materials, production and quality reporting, filing and maintaining paperwork, etc. Assist with any other duties and projects as required QUALIFICATIONS Must be proficient in gauging methods and procedures. Must maintain an excellent attendance record. Must be able to work independently without constant supervision and be able to work overtime as needed to cover absences. Must be proficient in the use of Microsoft Office Applications (Outlook, Excel, Word and Power Point at a minimum). Must have basic knowledge of or be trainable on Syteline. Must be able to wear prescribed safety equipment and promote a safe work environment. #1Anomatic

WHO ARE WE: BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating innovative engineered supply solutions. We truly believe in the importance of the local relationships with the customers we service. Our employees have fun every day exceeding the expectations of our customers, suppliers, and shareholders. We distinguish ourselves as the #1 choice of industrial manufacturers who are in need of Technical Service and Production Savings. We are BIG ENOUGH TO SERVE, and SMALL ENOUGH TO CARE. **This position is located onsite in Southington, CT** SUMMARY: The Quality Inspector is responsible for inspection of cutting tools by reading prints and inspecting tools by using micrometers, calipers, comparators, indicators and other measuring tools/machines, to ensure that they meet quality standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Personally exhibits, recruits and coach's associates consistent with Core Behaviors Responsible for promoting culture of safety Perform final quality inspection of finished products in accordance with the established procedures Report all instances of rejected product or raw materials problems to management Inspect incoming raw materials as materials are received Document appropriate information for quality inspection reports for each order Create and maintain current files for all quality related correspondence Work with shop floor supervisor to review internal rejects from the shop floor Report any unusual discrepancies or problems promptly to management Perform internal quality audits Perform other related duties as assigned Knowledge and ability to use micrometers, vernier caliper, radius gages and other video inspection equipment Competent with applying math skills/tool geometry SKILLS: Knowledge of cutting tools Excellent math aptitude Excellent customer service skills Excellent communication, interpersonal and organizational skills Diplomatic and professional when resolving issues Work well under pressure, and have exceptional time management skills Self-motivated and able to work independently Must be able to follow instructions in a fast paced, flexible environment EDUCATION and/or EXPERIENCE: High School Diploma or equivalent required Prior experience inspecting aerospace cutting tools preferred CERTIFICATES, LICENSES, REGISTRATIONS: None required WORK ENVIRONMENT: Employee is regularly required to speak and hear English, stand, walk, sit, use hand to finger, handle or feel objects, tools, or controls; reach with hands and arms. Employees are required to use computers and other equipment. Employees frequently lift and/or move up to 40 pounds. Specific vision abilities include close vision and the ability to clearly focus vision. PPE REQUIRED: Wrist rests for keyboard and mouse pad. Eye protection, ear protection, steel-toed shoes as required BENEFITS: Health Insurance BCBS of OK HDHP HSA with Employer match (must meet criteria) Dental and Vision Insurance 401K Plan and Company Match FSA (Full FSA, Limited FSA, and Dependent FSA) Company paid Long Term and Short-Term Disability Company paid basic Life Insurance and AD&D/ Supplemental life and AD&D/Dependent life Ancillary Critical Illness Insurance (Wellness Rider Included) Ancillary Accident Insurance (Wellness Rider Included) Ancillary Hospital Indemnity Employee Assistance Program (EAP) - Includes concierge services and travel assistance. Paid Time Off Holiday Paid Time Off Gym Reimbursement Quarterly Wellness challenge with a chance to will money or prizes Tuition Reimbursement - after 1 year of employment *BlackHawk Industrial is an Equal Opportunity Employer **As part of our BHID policy, we require all potential employees to undergo pre-employment background and drug screening. This is a standard procedure we follow to ensure a safe and productive work environment.

Job DescriptionBenefits: 401(k) Health insurance Paid time off Special Testing Laboratories, a construction materials testing & inspection services company, is seeking a CWI Certified Structural Steel Inspector to provide scheduled steel inspection services on various construction job sites and steel shops. As an Inspector, you will work closely with project superintendents to inspect the different phases of steel construction and to identify any discrepancies as necessary. Inspections will include (but are not limited to) assessment and inspection of both field and shop welding, metal decking, bolting, light gauge, cold-form framing, shear studs, ultrasonic, and column plumb. As an inspector, you will also be required to provide daily inspection reports and work closely with office staff on scheduling and reporting. The ideal candidate should reside either in Connecticut or Westchester County, NY. Job Requirements: -AWS-CWI Certification or certification in progress -Minimum education of a high-school diploma, college a plus -Experience in the industry required -UT Certification a plus -OSHA Certification a plus -Good written and oral communication skills -Ability to work well with staff and clients in a professional manner -Ability to handle multiple tasks -A valid driver's license and have daily access to a reliable vehicle STL is an equal opportunity/affirmative action employer.

Introduction The mission of the New Haven Health Department is to ensure and advocate for the health and well-being of all New Haven residents. The Bureau of Environmental Health maintains as its principal goal the preservation and protection of the environmental quality of the City of New Haven. Work includes: Utilize and enforce applicable sections of the State Public Health Code, State Statutes, and Municipal Ordinances Resolve cases of childhood lead poisoning; provide educational outreach activities and assist with distribution of federal lead abatement funds to prevent lead poisoning. Investigate and resolve public health nuisances and infractions of applicable statutes and/or ordinances Assist in preparing for and responding to public health emergencies Lead is a poisonous substance found in most homes in New Haven, especially those built before 1978. In fact, over 80% of New Haven homes are likely to contain lead. When exposed to lead, children or adults can have permanent and severe health problems. PRIMARY FUNCTIONS This is a technical position under the general supervision of the Environmental Health Program Director or designee in the Department of Health to perform investigations, education, and outreach for the prevention of childhood lead poisoning. Work includes inspections for the purpose of determining the presence of lead-based paint and surface coverings and lead in soil, dust and drinking water. Work is performed within the framework of existing laws, ordinances, policies, and regulations. TYPICAL DUTIES AND RESPONSIBILITIES Inspects buildings and dwellings for possible sources of lead poisoning. Conducts investigations, following established protocols, of home environments of children exhibiting the symptoms of blood-lead poisoning. Performs inspections using special instruments to identify surfaces containing lead paint. Collects samples of paint, dust, water, and soil from dwellings and delivers samples to laboratory. Document findings accurately and take photographs or videos, as necessary. Follows procedures to ensure abatement of all areas containing lead paint which may pose a direct hazard to the health of a child. Reinspects dwellings after completion of repairs to ensure compliance with regulations. Confers with individual property owners relevant to service of notices and violations. Fosters a cooperative working relationship with other city and state agencies. Records test data and prepares reports, summaries, or charts that interpret test results. Prepares reports, analyses and recommendations concerning inspection duties and outcomes. May conduct special surveys relating to general environmental health disciplines. May assist in coordinating duties with other concerned agencies. Develops and implements lead abatement plans for properties with confirmed lead hazards, including coordinating with property owners, contractors, and other stakeholders. Assists with providing educational workshops and outreach activities to raise awareness about lead poisoning prevention and provide information on available resources for lead abatement. Performs related work as required. EDUCATION, QUALIFICATIONS & EXPERIENCE Graduation from an accredited four-year college or university with a Bachelors' degree in Public Health, Environmental Science, Occupational Health and Safety, or directly related field, and A minimum of one (1) year of hands-on experience in environmental health inspection and enforcement, Or any equivalent combination of training and experience which provides the following knowledge, abilities and skills: KNOWLEDGE, EXPERIENCE, SKILLS & ABILITIES Considerable knowledge of policies, procedures, methods, and industry standards relating to environmental health. Considerable knowledge of lead poisoning, its effects on children, and long-term health implications. Knowledge of lead hazard identification, assessment, and effective abatement strategies. Considerable knowledge of current issues, research findings, and regulatory decisions regarding childhood lead poisoning. Demonstrated ability to conduct thorough investigations of buildings and dwellings to identify hazards. Competency in utilizing specialized instruments to test for surfaces containing lead paint. Excellent record-keeping skills, including accurate documentation of inspection findings, supported by other media as needed. Ability to prepare detailed written reports, summaries, analyses, recommendations, and charts that interpret test results. Ability to assist with development and implementation of effective lead abatement plans for properties with confirmed lead hazards. Ability to coordinate abatement efforts, including liaising with property owners, contractors, and relevant stakeholders. Strong interpersonal skills for conducting educational workshops and outreach activities aimed at raising awareness about lead poisoning prevention. Ability to use standard Microsoft Office with adeptness and ease, with the ability to learn new emerging technologies. Ability to effectively communicate with co-workers, other City agencies, the public, property owners, and other stakeholders. Ability to remain current on relevant literature, training, research findings, and industry advancements in the field of environmental health. Commitment to ongoing professional development, including attendance at conferences, workshops, and training sessions to stay updated on advancements in lead inspection and abatement techniques. Proven ability to work collaboratively with other city and state agencies involved in environmental health and lead abatement efforts. Ability for self-driven initiative, coupled with strong time management and organizational skills, enabling efficient and independent execution of tasks and responsibilities. Demonstrated ability to work effectively and sensitively in a diverse community, recognizing and respecting cultural differences, and fostering an inclusive environment conducive to achieving common environmental health goals. NECESSARY SPECIAL REQUIREMENTS Must obtain State of Connecticut Lead Inspector Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must obtain State of Connecticut Lead Risk Assessor Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must possess and maintain a valid driver's license throughout the course of employment. This position is aligned with current Core Competencies for Public Health Professionals published by the Council of Linkages between Academia and Public Health Practice. Analytical/Assessment Skills · Working knowledge of assessing individual and community health needs. · Ability to collect reliable data and analyze. Policy Development/Program Planning Skills · Ability to plan, implement and evaluate health education strategies, interventions and programs. · Demonstrate the ability to evaluate the effectiveness of all prevention and promotion programs and outreach efforts. · Good knowledge of the complexity of Connecticut State / City of New Haven laws and regulations, monitor them for changes and have the ability to independently adapt to changes. Communication Skills · Good working knowledge of the appropriate use of technology in health prevention and promotion and ability to independently adapt to the fast-changing landscape of technology. Cultural Competency · Ability to learn about and work with all cultures, ethnicity, social economic statuses being respectful and non-judgmental. Community Dimensions of Practice Skills · Ability to facilitate/coordinate community stakeholder groups. · Ability to present, understand and relay all points of view on issues. Public Health Sciences Skills · Good knowledge of the principles, practices and terminology of public health and chronic disease epidemiology. · Good knowledge of disease prevention and health promotion programs. · Working knowledge of communicable diseases, diagnoses, spread containment and treatment options. Financial Planning and Management Skills · Basic understanding of budgets Leadership and systems Thinking Skills · Demonstrate leadership and management skills. · Ability to independently manage projects while providing supervisory / oversight to diverse groups of community members. SALARY, BARGAINING UNIT & TERMS OF EMPLOYMENT This is a "General Fund," tested position. This position is included in a collective bargaining agreement with Local 884, American Federation of State, County and Municipal Employees. Bargaining agreements available to review HERE. General Funded hires into this class shall not be covered by Social Security but rather the City pension, contributing 9% of salary. The City of New Haven does not sponsor employment visas. All applicants must have current authorization to work in the U.S. without employer-sponsored visa support. Employment is contingent upon the successful completion of: (1) an pre-employment background check, (2) a pre-employment physical examination, including pre-employment drug screening accordance with the City's Drug Free Workplace Policy**, and (3) a 90-day probationary period. Instructions and information on this pre-employment process are included in Conditional Offer of Employment. **Pursuant to the Federal Drug Free Workplace Act of 1988, The City of New Haven has a adopted a Drug Free Workplace Policy. The City of New Haven requires a pre-employment drug test, which includes screening for marijuana. Selection Plan Applications will be reviewed by the Department of Human Resources. Applicants must demonstrate within their submission that they meet the minimum requirements as listed within the job description; failure to do so may result in disqualification. Applicants meeting minimum requirements may be invited to participate in a Civil Service exam process at a later date. It is critical that you complete the application thoroughly, as the information you provide will be used to ascertain if you are eligible to move forward in the selection process. Your application and resume should indicate that you meet the minimum requirements as listed. This information may be used to determine the eligibility list. As such, this job announcement should be considered the exam announcement, and submissions may be evaluated prior to the posted closing date. Information regarding the employment and selection process can be found HERE. Please note that the only method of communication with applicants for this position will be by email. You must provide a valid, working email address and you will need to monitor your email, including spam/junk folders, for correspondence from the New Haven Human Resources Department. We reserve the right to extend an application deadline or close a job posting early to ensure we can attract and identify the best candidate(s) for a position. Conclusion To apply for this opportunity: Complete your User Registration. You are encouraged to save your Applicant Profile for future use. You MUST click on the job posting you are interested in, and click Apply or Apply Online from within that posting. MAKE SURE the job you are applying for is named at the top of the page as you review your application! Review or modify your application for that position Click "Ready to Send App" or the "Send" tab; read page and click the attestation Click "Send to City of New Haven" You will be redirected to "CONFIRMATION OF EMPLOYMENT APPLICATION SUBMISSION" You will also receive an email and text, if a number was provided, confirming your submission If you do not receive this confirmation in the next 24 hours, your application has not been submitted - please contact us at ********************* Please Note, your Profile is NOT an application for an open position. After you create your Applicant Profile, you must still click on a Job Title and complete the application as instructed for each position.

About the Firm: Our mission: Transforming infrastructure for the next generation with passion and kindness. We provide quality, cost-effective engineering services to state and local governments and private-sector clients across New York State and Pennsylvania. Our project portfolio features experience in bridge, highway, and structural design. Condition and safety inspection. Civil and site engineering support. Construction inspection and administration. Survey and mapping and hydrographic services. Prudent Engineering is an Equal Opportunity Employer. What you'll be able to do: We are seeking a Construction NIII Inspector with bridge replacement experience for position in Poughkeepsie, NY, to start immediately. Construction inspectors are responsible for overseeing and inspecting construction projects at various stages to ensure compliance with project plans, project specifications and regulations. The minimum requirements we seek: NICET III certification or equivalent experience. Prior New York State DOT and/or New York State Thruway inspection experience or similar experience working on bridge construction projects. Proficiency in computer aided project administration is preferred. Bachelor's degree in civil engineering, construction management, or a related field is preferred. Relevant work experience may be considered in lieu of a degree. OSHA 10 certification & knowledge of safety procedures and practices related to construction sites. Valid driver's license and the ability to travel to and on the construction sites. What we offer: Senior Inspector Level III compensation of $50.00-$52.00/hour* Medical, dental, vision. 401K with company match. PTO plus paid holidays. Unlimited opportunities to advance your care. *Actual compensation may vary based on work experience, location, market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills.

Under the direction of the inspection supervisor or leadperson(s), this individual must be able to perform inspection procedures on a variety of bearing components and finished assemblies. This individual must be able to read complex drawings and perform inspection operations as required using measuring instruments such as micrometers, verniers, dial indicators, and direct reading instruments such as air gages, plug gages and torque and radial clearance gages and Rockwell hardness tester. This person must be able to select the appropriate inspection instrument, perform inspection operations according to a specified sampling plan and prepare necessary paperwork when parts fail to meet print specifications. This individual will be responsible for reporting any discrepancies to either the leadperson(s) or the supervisor. Other responsibilities include keeping the workplace clean, moving work being inspected within the area of the workplace and performing any other reasonable duties as assigned by inspection supervision.

Hamilton Connections is seeking candidates for a quality control inspector operating at a manufacturing company in Danbury, CT. The quality control inspector is responsible for testing, evaluating and documenting the quality of manufactured products. The hours are 3:30 p.m.-12 a.m., Monday-Friday. The job pays $28-$32 an hour, depending on experience. Job Responsibilities: Perform first piece, final and first article inspections of products to inspect for damage and/or defects Use measuring tools like calipers, micrometers and gages to inspect products Measure products for accuracy according to blueprint specifications Maintain accurate documentation and reporting Other duties as assigned Job Requirements: 5 or more years of quality control experience, including first piece, final and first article inspections Experience with precision measuring instruments, including calipers, micrometers, height gages, plug gages and thread gages Able to read blueprints Coordinate Measuring Machines (CMM), vision system and/or optical comparator experience Geometric Dimensioning and Tolerancing (GD&T) experience Familiar with ISO procedures a plus Organized, responsible and self-driven High school diploma or equivalent Able to pass pre-employment screenings

Thule Inc, Milford, CT JOB SUMMARY: The inspection of materials, purchased or produced by Thule, to determine if materials meet or exceed all specifications and requirements. Inspection includes receiving goods, first piece, non-routine (layout) and finished goods. Inspector will create and maintain inspection records. Inspector will perform product audit and maintain records. RESPONSIBILITIES: Maintain databases, records and logs in accordance with ISO/IATF standards. Perform incoming inspections of raw material, cartons, labels and purchased parts. Perform re-inspection tasks. Verifying product. Update database with new revisions and requirements. Help create or improve and implement quality systems, processes and programs. Assist warehouse resolve any quality problems. Assist Quality Associates in assigned job functions. Maintain equipment in accordance to Metrology procedures and instructions. Update inventory status. (Q.C. Hold, RTV, Rework, etc.). Conduct audits of kitting / packing. Perform audits of customer orders/shipments to verify all items are present and packaged to prevent damage during shipping. Conduct product audits of finished goods, RMA/Repack and OE Kitting areas at EDC warehouse. Review, disposition of RMA / repack area product - both visual inspection and system movements. Other functions as required and assigned by supervisor. POSITION REQUIREMENTS: 3-5 years experience or equivalent work experience in the inspection and/or quality profession. Strong understanding of inspection methods and techniques and understanding and implementation of receiving goods sampling, auditing techniques Basic quality tools - calipers, pin gages, micrometers, visual inspection Must be mechanically proficient including the use of basic hand and power tools. Computer literate in MS Office (Excel, Word, Access, Outlook and PowerPoint). Computer literate in ERP system Good oral and written communication skills. Thule is an Equal Opportunity Employer We believe in strong team work both within your own team but also across teams. We strive to be an open and curious organization, sharing our knowledge and inspiring one another. Within Thule Group you will find people who have a passion for the products we make and the outdoor company we are. We share the same values and we like to have fun. All of our employees have a joint responsibility to maintain that spirit and contribute to it. Thule, Inc. requires you to complete an on-line application for any of our job openings. In the event you have a disability in which you are unable to complete the on-line application, please call ************** for assistance. About Thule Group Thule is a global sports and outdoor company. We offer high-quality products with smart features and a sustainable design that make it easy for people across the globe to live an active life. Under the motto Bring your life - and with a focus on consumer-driven innovation and long-term sustainability - we develop, manufacture and market products within the product categories Sport & Cargo Carriers (roof racks, roof boxes and carriers for transporting cycling, water and winter sports equipment, and rooftop tents mounted on a car), Active with Kids & Dogs (car seats, strollers, bike trailers, child bike seats and dog transport), RV Products (awnings, bike carriers and tents for RVs and caravans) and Bags & Mounts (backpacks, luggage and performance mounts). Thule Group has about 2,800 employees at nine production facilities and 35 sales offices worldwide. The Group's products are sold in 138 markets and in 2024, sales amounted to SEK 9.5 billion. ****************** Share links Return to job vacancies

Quality Inspector 1 - Non-exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. We looking for an Aerospace Quality Inspector to perform 1st piece, in-process and final inspection on aircraft engine components for compliance with engineering drawings, customer requirements and company specifications before or after manufacturing processes. This will also include performing inspection procedures including checking dimensions of related surfaces, holes, etc., as well as assessment of finish and detection of undesirable nonconformances. Location: Cheshire, CT Reports to: Quality Supervisor/Manager Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. Obtains blueprints and company specification sheet for the item and particular order. Must be capable of reviewing internal operation sheets against customer blueprints. Determines inspection procedure to ensure complete verification of specifications and dimensions. Obtains necessary fixtures, gauges, and indicators to check parts for compliance with specifications, within prescribed tolerances. Completes certain assurance checklists during the process. Performs dimensional checks of parts while in the machine when necessary. Rejects unacceptable items, documents nonconformance, and moves part to quality clinic. Completes required company paperwork on machined parts inspection activity. Ability to read and understand work instructions such as Op Sheets, Engine Manuals, Customer Purchase Order Requirements, etc. Ability use measuring instruments such as a micrometer, caliper, swing gage, etc. Accurate documentation of all inspections (Ex: Receiving, In-Process, Final) and ability to work with operators to ensure all requirements are met. Communicates with co-workers, colleagues and Supervisors to receive instructions and/or guidance and coordinate activities. Organize and maintain inspection department, gaging methods, etc. Work independently and efficiently to meet customer requirements. Willingness to work with shop personnel to induct incoming parts and aid in the expeditious shipment of critical parts Ability to read and comprehend instructions, short correspondence, and memos. Adaptability to different inspection methods Adhere to standards of safety and housekeeping as established Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description. Participate in training as required 5-10% Domestic Travel required Requirements: Must be a “U.S. Person” as defined by US Government and able to work without restriction with ITAR related data. High school diploma or general education degree (GED) required 1+ years experience as an aerospace part inspector; or equivalent combination of education and experience. Ability to use measuring instruments such as a micrometer, caliper, swing gage, etc. Knowledge of blueprint reading and machinery limitations. Ability to read and comprehend simple instructions, short correspondence, and memos. Must have visual acuity enough to be able to read machine dials, gages, Op sheets and precision measuring equipment. Must be able to read, write, understand, and speak English at a functional level. AAP Statement Hanwha Aerospace USA Corporation, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Subject to change with or without notice

Job Description Under the direction of the inspection supervisor or leadperson(s), this individual must be able to perform inspection procedures on a variety of bearing components and finished assemblies. This individual must be able to read complex drawings and perform inspection operations as required using measuring instruments such as micrometers, verniers, dial indicators, and direct reading instruments such as air gages, plug gages and torque and radial clearance gages and Rockwell hardness tester. This person must be able to select the appropriate inspection instrument, perform inspection operations according to a specified sampling plan and prepare necessary paperwork when parts fail to meet print specifications. This individual will be responsible for reporting any discrepancies to either the leadperson(s) or the supervisor. Other responsibilities include keeping the workplace clean, moving work being inspected within the area of the workplace and performing any other reasonable duties as assigned by inspection supervision.

CMM Quality Inspector - Contract to HireNew Haven | $18 - $25/hr | PTO plan Are you a detail-driven inspector who thrives on precision? We're looking for a CMM Quality Inspector to join a growing manufacturing team. What You'll Do: Inspect parts using CMM equipment and precision tools Interpret blueprints & GD&T Verify incoming, in-process, and finished products Document results & support production/engineering teams What We're Looking For: Hands-on experience with CMM equipment (programming a plus) Strong GD&T and blueprint reading skills Solid track record in quality inspection The Offer: Contract-to-hire opportunity $18 - $25/hr, depending on experience PTO plan (no medical benefits offered) Stable company, long-term potential If you're the “needle in the haystack” inspector who delivers accuracy every time, we want to meet you! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws. #E1

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: The In-Line Inspector is responsible for the inspection of all products and raw materials, under the direction of the Business Unit or Cell Lead with technical direction from the Quality Assurance Manager. This is a hands-on role in a manufacturing setting and is ideal for someone who is reliable, detail-oriented, and eager to contribute to a high-performing team. Location: Plainville, CT This role is 100% onsite and is not eligible for remote or hybrid work. Responsibilities: Inspect products using various inspection gages, coordinate measuring machine (CMM), scales, and visual inspection prior to product shipment Variable data collection and completion of inspection records Reconcile final inspection documentation for shipments Examine material or product for surface defects such as cracks, pits, and other surface irregularities. Compare product with applicable parts list or sample model to ensure completion of assembly. Verifies dimensional compliance of all products with drawing and customer requirements. Authority to reject nonconforming products and stop production of such as needed. Documents nonconforming product with NMR process. Performs in-process inspection and testing of products throughout the manufacturing process to ensure compliance with all applicable mechanical and process related requirements. Observes all Company policies, rules, and regulations including good housekeeping, safety and security. Required Qualifications: High school diploma or equivalency certificate Must be authorized to work in the U.S. on a full-time bases without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: High school or equivalent 1-3 years of experience in Quality Control function in a commercial or Aerospace environment Must be able to understand and follow instructions in English. Must be able to understand and interpret blueprints and engineering sketches. Ability to perform simple layout inspections. Must have demonstrated mechanical ability. Proficiency in Microsoft WORD and EXCEL Ability to perform multiple tasks in a fast-paced environment Clear communication (oral and written) skills Ability to keep accurate records Ability to follow documented procedures, work instructions and customer required records. Ability to work independently with little supervision Working Conditions Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to climb ladder, work on platforms, and climb stairs Personal protective equipment (e.g., safety glasses) is required on the shop floor Occasional weekend and evening work may be required to accommodate priorities, deadlines, and schedules. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Sims Metal (Sims) is a global leader in metal recycling. With facilities across the globe, Sims plays an intrinsic role in the circular economy by making resources available for future use. As a responsible corporate citizen, we continuously seek new ways to broaden our participation in the environmental sector, ensuring that our future is as bright, safe, and secure as at any time in our long history. Job Summary: The Ferrous Materials Inspector is responsible for inspecting incoming ferrous materials to ensure they meet company specifications and quality standards. This role also involves purchasing compliant materials and maintaining accurate documentation. The ideal candidate will be detail-oriented, safety-conscious, and capable of operating in a fast-paced environment. Key Responsibilities: * Ensure a safe working environment by following all company safety policies and procedures. * Examine customer-delivered ferrous materials to identify the appropriate commodity classification. * Determine the purchase category and approve or reject materials based on established specifications. * Utilize a computer kiosk to input purchases and process transactions. * Inspect materials to confirm compliance with internal quality control standards and applicable regulations. * Apply approval or rejection markings as needed and document inspection findings in detailed reports. * Perform other duties as assigned by management. Qualifications: * High school diploma or General Education Development (GED) certificate required. * 1-3 months of relevant experience or training, or an equivalent combination of education and experience. * Ability to read, speak, and understand English; Spanish language skills are a plus but not required. * Basic computer proficiency and the ability to learn internal systems. * Strong attention to detail and the ability to make sound decisions based on inspection criteria. Physical Requirements: The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. * Regularly required to stand, walk, and use hands to handle or feel materials. * Frequently required to reach, climb, balance, talk, and hear. * Must frequently stoop, kneel, crouch, or crawl. * Must regularly lift and/or move up to 25 pounds, frequently up to 50 pounds, and occasionally up to 100 pounds. * Specific vision requirements include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. A career with Sims provides you with the opportunity to work with an organization whose goal is to be the world's safest and most responsible recycling company. Our people achieve this by creating a zero-harm workplace, being exemplary members of the communities in which we operate, and being responsible stewards of the environment. We also offer competitive pay and a range of attractive benefits. Sims is proud to be an equal opportunity employer. We value the diversity of all of our employees and are committed to creating an inclusive working environment where everyone can contribute, advance on merit, and realize their full potential. Sims does not discriminate with regard to race, sex, religion, color, national origin, citizenship status, disability, age, marital or familial status, sexual orientation, gender identity, gender expression, veteran status, housing status, source of income, or any other status protected by federal, state, or local laws. This applies to any employment decision, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. qualified applicants with a disability in need of a reasonable accommodation may request such without fear of reprisal or discrimination. To achieve our purpose to create a world without waste to preserve our planet, we are guided by our Principles of Purpose: Be Safe + Well, Band Together, Be Accountable + Transparent, Consistently Innovate, Inspire with Purpose, Celebrate + Have Fun. ALREADY AN EMPLOYEE? Please apply through our Internal Career Site: Click here Why Choose A Career with Sims? Sims is a hub of innovation, offering employees the chance to explore new ideas and technologies while providing ample opportunities for personal and professional growth. With a diverse workforce, Sims fosters a sense of belonging and inclusion where employees can thrive and establish lasting connections. Working at Sims offers the chance to engage with a global network, providing opportunities for travel, cross-cultural experiences, and the ability to contribute to a sustainable future. Sims is renowned as one of the world's leading sustainable companies, empowering employees to make a difference in creating a world without waste to preserve the planet. Sims prioritizes employee wellbeing, offering superior benefits packages, meaningful training opportunities, and a supportive atmosphere where employees feel valued and heard at all levels of the organization. Sims maintains a strong focus on safety, where individuals are encouraged to challenge themselves, contribute, and support one another, in a collaborative team environment.

Job DescriptionWe are seeking a Quality Inspector to join our growing team! Established in 1977, we're currently a small job shop operating in an AS9100 certified environment. Our focus is precision machined products and the individual we seek will serve a key role within the company. Ideal candidate will have a solid understanding of GD&T with experience setting up and utilizing various measuring instruments such as; bore gauges, micrometers, calipers, dial indicators, e.t.c.. Responsibilities: Layout and perform first piece inspections Participate in routine mechanical inspections and receiving inspections Prepare First Article Inspection Reports per AS9102 Qualifications: Previous work experience in quality control or other related fields Strong attention to detail Strong analytical and critical thinking skills, strong mathematical skills are necessary. Excellent written and verbal communication skills Proficient with Microsoft Office. Bonus Qualifications: CMM experience is preferred Perform Calibration and maintain records Knowledge of Quality Management System in an AS9100 environment Pay varies significantly DOE Benefits include Health Care, Retirement, PTO

Quality Inspector 1 - Non-exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. We looking for an Aerospace Quality Inspector to perform 1st piece, in-process and final inspection on aircraft engine components for compliance with engineering drawings, customer requirements and company specifications before or after manufacturing processes. This will also include performing inspection procedures including checking dimensions of related surfaces, holes, etc., as well as assessment of finish and detection of undesirable nonconformances. Location: Cheshire, CT Reports to: Quality Supervisor/Manager Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. Obtains blueprints and company specification sheet for the item and particular order. Must be capable of reviewing internal operation sheets against customer blueprints. Determines inspection procedure to ensure complete verification of specifications and dimensions. Obtains necessary fixtures, gauges, and indicators to check parts for compliance with specifications, within prescribed tolerances. Completes certain assurance checklists during the process. Performs dimensional checks of parts while in the machine when necessary. Rejects unacceptable items, documents nonconformance, and moves part to quality clinic. Completes required company paperwork on machined parts inspection activity. Ability to read and understand work instructions such as Op Sheets, Engine Manuals, Customer Purchase Order Requirements, etc. Ability use measuring instruments such as a micrometer, caliper, swing gage, etc. Accurate documentation of all inspections (Ex: Receiving, In-Process, Final) and ability to work with operators to ensure all requirements are met. Communicates with co-workers, colleagues and Supervisors to receive instructions and/or guidance and coordinate activities. Organize and maintain inspection department, gaging methods, etc. Work independently and efficiently to meet customer requirements. Willingness to work with shop personnel to induct incoming parts and aid in the expeditious shipment of critical parts Ability to read and comprehend instructions, short correspondence, and memos. Adaptability to different inspection methods Adhere to standards of safety and housekeeping as established Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description. Participate in training as required 5-10% Domestic Travel required Requirements: Must be a “U.S. Person” as defined by US Government and able to work without restriction with ITAR related data. High school diploma or general education degree (GED) required 1+ years experience as an aerospace part inspector; or equivalent combination of education and experience. Ability to use measuring instruments such as a micrometer, caliper, swing gage, etc. Knowledge of blueprint reading and machinery limitations. Ability to read and comprehend simple instructions, short correspondence, and memos. Must have visual acuity enough to be able to read machine dials, gages, Op sheets and precision measuring equipment. Must be able to read, write, understand, and speak English at a functional level. AAP Statement Hanwha Aerospace USA Corporation, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Subject to change with or without notice

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: Quality Inspector will perform Final inspection, in-process and 1st article inspections, evaluate part to print specifications and understand the inspection methods used for inspection and support the manufacturing process and personnel, while adhering to the Quality Policy, AS 9100 requirements. This position will include a 20% shift differential. Essential Responsibilities: Strong blueprint and Geometric Dimensioning & Tolerance (GD&T) comprehension Proficient in the use of inspection tools, such as micrometer, indicators, comparator, etc. Detailed to complete all paperwork, as required, including inspection reports. Able to make mold casts to check ID dimensions. Can identify dimensional and visual defects. Accuracy and attention to detail is highly important. Experienced with completing 1st article inspections, in-process inspections, and final inspections. Must have strong knowledge of aerospace specifications and requirements, particularly Pratt and Whitney Perform other duties as required. Qualifications: Proficient at reading blueprints Strong understanding of dimensional symbols Ability to identify visual defects. Proficient in reading micrometers, calipers, Optical comparator, manual and DCC CMM. Proficient with the use of measuring equipment. Ability to work together as team a member. Organized and detail oriented. Adhere to document control. Experience with various inspection reports Epicor experience a plus Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Full-time Description Maintain and operate a magnetic particle inspection system Perform magnetic particle inspections on components following established procedures and standards including the following. a) QWI-1021- Mag Particle Inspection b) QWI-1022- NDT-Certification Requirements c) QWI-1023- Mag Particle Tech Sheet d) QWI-1024- MT Equipment Verification Sh.4 · Set up and calibrate MPI equipment, ensuring proper functioning and accurate results. · Conduct inspections on parts to identify surface and near-surface defects, such as cracks, porosity, and other discontinuities. · Interpret and evaluate inspection results, documenting findings accurately and preparing detailed inspection reports. · Collaborate with Quality, Engineering and Production to troubleshoot and resolve MPI-related issues. · Ensure compliance with safety standards and regulations during all inspections and testing activities. · Perform periodic equipment maintenance and ensure equipment is in proper working condition. Requirements · High school diploma or equivalent; additional certifications or technical education in NDT methods is preferred. · Attention to detail and accuracy in recording inspection results and preparing reports. · Excellent analytical and problem-solving skills. · Must be available for training and be able to pass Certification Exam upon completion of the training. · Excellent analytical and problem-solving skills. · Proficient in using MPI equipment and tools (Following completion of training). · Excellent communication skills to effectively collaborate with team members. · Ability to work independently and as part of a team. · Strong time management and organizational skills. · Commitment to safety protocols and guidelines. Training Objectives: · Complete Mag Particle Inspection Level II Training and pass certification exam. · Become familiar with all internal work instructions and procedures related to Mag Particle Inspection. Salary Description $ 23.00 per hour

JOB DESCRIPTION: The Receiving Quality Inspector shall be responsible for the following: Performing receiving inspection of raw material, hardware and consumable items Review of supplier-provided quality documentation (certificates, test results, etc.) Performance of mechanical inspection of purchased machined parts using hand-held measuring devices Performance of form, fit, function inspection of outside processed parts to design drawings/mylars of sheet metal parts Performance of hardness and continuity testing of outside processed heat treated parts Completion of inspection reports on company-provided formats Data entry in the organization's ERP system - Global Shop Assisting other inspectors in fulfillment of their job duties, as required Performance of any and all tasks in support of the organization's Quality Management System - as assigned by the Director of Quality or his designee

Hudson River Housing improves lives and communities through housing with compassion and development with vision. We are dedicated to building strong, sustainable communities by developing and preserving quality affordable housing and helping families and individuals obtain and maintain housing through education, advocacy and support services. We are a committed group of people from all backgrounds who care deeply about our community and want to make it a better place. Position: Property Protection General Description: The Property Protection/Security position will provide additional support to staff and will monitor residents, visitors, staff, physical plant and property. He/She will provide continuous on foot monitoring of all grounds, both inside and outside of the buildings and around the perimeter of the properties. Property Protection will become the on-site contact person in the event that Police, Fire or EMS needs to be dispatched to any facility. Property Protection will be responsible for all written accounts of incidents during scheduled hours. This position does not require the carrying of a firearm or a NYS Security License Principal Duties: Conduct continuous “on-foot” monitoring of all of the grounds, both inside buildings and outside perimeter of the property. It is imperative to maintain a safe and secure environment for both the residents of the site as well as HRH staff and volunteers. Property Protection staff are expected to perform the following duties: Physically check vacant rooms at least 2x per night, verify that emergency exit doors are secured, windows on the ground floor are closed and/or secured throughout the night, kitchen facility is locked and secured, laundry rooms are closed, smoking rules are being adhered to, noise violations are addressed, non-approved visitors are escorted off grounds, report suspicious vehicles on grounds overnight, report and/or attend to any slip hazards identified, etc…. Rules and policies are to be enforced in a compassionate and human manner. Ultimately, the safety of all guests, staff and volunteers must be a primary concern. Provide assistance to other on-site staff when unusual sightings are observed or situations present themselves. All suspicious activity must be checked out. Call local police when necessary to assist with conflicts that might occur. Property Protection should never attempt to act in a situation that could be deemed dangerous. Property Protection will become the contact person when the police arrive on the scene. An accurate account of all incidents will be recorded on an HRH Incident Report Form and submitted for appropriate signatures. Any incident that requires that the police, fire department, CPS or other governmental agency be called should be documented. In addition, any on-site incident that could be perceived as an altercation, major violation of rules, disturbance or questionable behavior should be documented by property protection staff. A daily/nightly log should be kept to record all rounds that are done and any notable actions that are taken. It may be necessary from time to time for the Property Protection staff to fill in for routine tasks normally assigned to the Front Desk in the event that a staffing shortage cannot be avoided. Other duties may be assigned by supervisory staff or HRH Administrative staff. Secondary duties: Must demonstrate sensitivity toward the Program's target population, and ability to comfortably and effectively relate to individuals of diverse backgrounds, and be respectful of cultural differences. Must be responsible, non-judgmental, and able to work independently and as part of a team. Must have a strong commitment to personal and professional ethics and standards and be able to set and maintain appropriate boundaries with program participants. The position requires the ability to stand on your feet for long periods of time as well as climb stairs multiple times throughout the night. Must be able to react quickly and effectively in a crisis situation. This position requires a criminal background check in accordance with applicable state and federal regulations The position also requires the ability to drive to multiple program sites and properties as needed. Qualifications: Experience: Prior experience dealing with emergency and/or crisis situations. Education: A variety of educational experiences and skill sets will be considered for all positions. Licensing/Certification Requirements: Valid NYS Driver's License. Valid/current NYS Security License is helpful but is not required. Salary: $18.00 per hour Location: Poughkeepsie, NY Immediate Supervisor: Security Manager Equity is a core value at Hudson River Housing. We believe in promoting a culture that decenters bias, celebrates difference, enhances equitable communication, and nurtures relationship building . It is important to us that community members have access to stable means of economic growth. We are continually committed to hiring from within our community including applicants with lived experience that can inform and strengthen our work. Hudson River Housing is dedicated to maintaining a work environment that is free from harassment and discrimination on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, gender identity or expression, sexual orientation, pregnancy (including childbirth and related medical conditions), alienage or citizenship status (unless required by law), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), or any other protected status under federal, state, or local laws. Hudson River Housing is dedicated to the fulfillment of this policy with respect to all aspects of employment, including, but not limited to, recruiting, hiring, placement, transfer, training, promotion, compensation, termination, and all other terms, conditions, and privileges of employment.