Inspector jobs in Ohio - 1,418 jobs

The Quality Inspector performs receiving, in-process, and final inspections to ensure parts meet quality standards and specifications. This role supports production by verifying measurements, approving first articles, and maintaining accurate quality documentation. Responsibilities Perform new, routine, in-process, and final inspections of standard parts. Verify operators are accurately measuring and recording dimensions using inspection paperwork or electronic documentation. Conduct first article and first-piece approvals. Perform part measurement using CMM and other inspection equipment. Complete, review, and support non-conformance documentation. Assist Quality Engineers with quality improvement and cost-saving initiatives. Support production and document control activities as needed. Perform additional quality-related duties as assigned. Qualifications High School Diploma or GED required. 3-6 years of experience in a quality inspection role preferred. Strong attention to detail and effective verbal communication skills. Proficient in blueprint reading and GD&T. Ability to use inspection tools such as CMMs, micrometers, calipers, gauge blocks, and pin gauges. Physical Requirements & Work Environment Frequent sitting, standing, walking, and use of hands for grasping and gripping. Occasional stooping, kneeling, crouching, and operation of machinery or power tools. Occasional lifting, carrying, pushing, and pulling of 20-25 lbs. Work performed in a manufacturing environment with moderate to high noise levels. Schedule 2nd Shift: Monday - Thursday, 3:30 PM - 2:00 AM Pay Details: $21.00 to $28.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

FRAZEYSBURG NOW HIRING MULTIPLE PEOPLE 2nd & 3rd Shift • $15.50/hr • START NEXT WEEK If you need a job FAST, this is it. Show up. Start ASAP. Get paid. Production positions Reliable schedule Bring a friend BOTH get hired Apply at: 65323 Highland Hills Rd, Cambridge OH 43725 (Bring two forms of valid ID) These spots WILL fill. Don't sleep on it.

ID 2026-18141 Element has an opportunity for qualified candidates to fulfill available positions for Fluorescent Penetrant Inspectors (NDT) for Trainee, Level I and Level II Inspectors. Level I/Trainee candidates will be considered. Completion of applicable classroom time, and practical hours (OJT) to achieve Level II certification with in the first year of employment, is required. Candidate must be available to attend evening classes as they are scheduled for the duration of training. Training on first shift 6 a.m. to 2:30 p.m. and then will move to second 2 p.m. to 10:30 p.m. or third 10 p.m. to 6:30 a.m. Responsibilities Perform calibrations, nondestructive tests, and evaluations for acceptance or rejection determinations with respect to applicable codes, standards, and specifications Accurately record results and associated data of nondestructive tests and evaluations Maintain familiarity with the scope and limitations of the method of NDT being used and exercise assigned responsibility for on-the-job training and guidance of Level I technicians. Maintain a clean and orderly work environment. Actively contribute to company safety culture by observing all company safety policies and procedures Use caution and proper handling of company property, equipment, tools, and customer product Skills / Qualifications High school diploma/GED required Technical/mechanical aptitude and computer proficiency preferred Written Communication: ability to read and interpret information, write legibly, take accurate measurements from a tape measure, present numerical data effectively, and edit work for correct spelling and grammar Able to prioritize critical work activities and use time effectively Self-motivated, with the ability to problem solve and analyze information skillfully Ability to clearly communicate with team members, supervisors, and all others throughout the organization in a professional manner #LI-TK1 Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) "If you need an accommodation filling out an application, or applying to a job, please email "

Hiring Manager: Mike Lockwood Recruiter: Debbie Dostal As a part-time consulting inspector, you will review and witness activities to recognized international codes, standards and/or regulations such as ASME Code, Pressure Equipment Directive (PED) and Canadian Standards to name a few. You will also provide inspections to, client specifications and perform Engineering services to companies as needed. The position requires a National Board AI Commission. The position has minimum qualifications of a high school diploma and work experience with boilers and pressure vessels or nuclear reactors. Training is provided for every Code edition issuance for all our inspectors, which is developed and supported by our technical industry experts. About HSB - Global Inspection and Engineering Services Global Inspection and Engineering Services is an inspection focused engineering division of HSBIIC with over 450 engineers, inspectors and auditors located in over 27 countries. The world's largest ASME Authorized Inspection Agency, GIES Inspectors are instrumental in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, erected and/or repaired. The work of our Global Inspection and Engineering Services personnel is focused on the beginning of the life cycle of the type of equipment insured by HSB and is an important part of HSB's comprehensive understanding of the insured equipment. Services include: Review and acceptance of Job Packages In-process Inspections Monitoring of Quality Control System Witnessing final Hydrostatic Test Review and signing of required forms HSB has a long and respected reputation as the leader in our industry with a primary focus on workplace safety. Qualifications: Required: N.B. of Boiler and Pressure Vessel Inspectors Commission State Certificate of Competency and National Board of Boiler and Pressure Vessel Inspectors AI Commission. H.S. diploma. Preferred: National Board R Endorsement Technical College Graduate Engineering degree Experience with boilers and pressure vessels. Risk Survey experience Physical Requirements: The person in this position needs to routinely move about (including ascending/descending) a site facility, remote location, etc. while performing visual inspections of ASME/NB boilers and pressure vessels, review NDE reports and calculations. Consistently works in outside weather conditions that may be in frigid or hot temperatures. May need to lift own body weight with associated safety equipment. Must be able to remain in a stationary position 50% of the time. Other Requirements: Some of HSB's customers require our personnel to have a security clearance to enter their facilities. As such, candidates for this position must be eligible to obtain a security clearance. Because this position may require routine travel among multiple customer locations the successful candidate must have an acceptable driving record. At The Hartford Steam Boiler, a subsidiary of Munich Re, we see Diversity and Inclusion as a solution to the challenges and opportunities all around us. Our goal is to foster an inclusive culture and build a workforce that reflects the customers we serve and the communities in which we live and work. We strive to provide a workplace where all of our colleagues feel respected, valued and empowered to achieve their very best every day. We recruit and develop talent with a focus on providing our customers the most innovative products and services. We are an equal opportunity employer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. The work environment characteristics, and any physical and mental requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Apply Now Save job

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External Responsibilities: Working knowledge of statistical data collection Capabilities Studies and Gage R&R's Work with Product development activities Project management skills Advance knowledge of metallurgical equipment Assist in Development of training programs regarding complex measuring equipment Create and modify programs for stationary and portable coordinates measuring equipment & related software. Writing maintaining and troubleshooting gage programs Participating in projects Maintaining cleanliness and organization of work areas (5s) Comply with all applicable occupational Environmental, Health, and Safety standards, as well as Crown's safety rules and regulations for each task performed. To prevent the risk of injury, report unsafe conditions and do not perform unsafe acts. Other duties as assigned Requirements: Per 8 hours shift (any combination of standing, sitting and walking ) occasionally bend, squat, climb, reach above shoulder level, kneel, balance and push or pull objects, frequent lifting and carrying (frequently 0- 10 lbs and occasionally 11-50lbs) Must be able to hear, have good vision, distinguish colors, simple and fine grasping with both hands Must be able to work in a moderately noisy environment that includes exposure to coolants, lubricants, dust, adhesives, solvents, oils and weld flash. Inspection equipment and ability to read and understand blueprints; advanced math skills Communicate (verbal and written) effectively with other people, learn and understand work instructions Retain knowledge; advance understating of computer work stations. Completed Level 3 Inspection requirements within Crown's predetermined quality matrix. 5 years of experience required and/or 2 years associates' degree in Metrology or relative experience. CMM programming, trouble shooting and operation and weld evaluations Training: CWI (Certified Weld Inspector) - 120-hrs total classroom training / 3 exams (Hobart Technical Institute / AWS HQ) Ultrasonic Testing - 96-hrs total classroom training plus 30-consulting-hrs (American Testing Services) Welding Expert (currently called StructureExpert Weld) - 8-hrs in-house training (Crown) WiKi-SCAN Portable Laser Weld Inspection - 12-hrs in-house training (Crown) Magnetic Particle Testing (MT) / Dye Penetrant Inspections - 40-hrs classroom training (Hobart Technical Institute) / 4-hrs in-house MT (Crown) Microhardness Inspection - 24-hrs classroom training (Leco Corporation) Spectrometer (Spectrotest) - 12-hrs in-house training (Crown) Nikon Vision Measuring System - 48-hrs [(2) 24-hr sessions] classroom training (Nikon Incorporated) Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

Reporting to the Waterjet Quality Manager, the Waterjet Inspector will be responsible for inspecting aerospace / gas turbine engine components for compliance with engineering drawings, customer requirements and company specifications. Accountable to approve items within specifications and recommend disposition of items not meeting standards. Will adhere to all quality standards. Requirements: * Must be able to use standard gauges (micrometers, height gauges, calipers etc.) * Must have a strong math background * Must have HS Diploma or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Demonstrated ability to effectively perform assigned tasks and interpret results of inspections * Must be able to interpret geometric dimensions and tolerances * Ability to meet critical deadlines and work in fast paced environment * Basic to Intermediate proficiency in MS Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information clearly verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends * Must be willing to work a swing shift, if required * Ongoing FAA Testing and Training Mandatory * MTI is a safety sensitive manufacturer. As such, successful results of FAA drug testing will be required. Preferable Experience: Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 25% of the work day). The employee must frequently lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #4151301125WJ to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an entry-level Petroleum Inspector to join our Caleb Brett team in Cincinnati, OH. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award- winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector is responsible performing the necessary volume measurements, temperature measurements, sampling, calculations, documentation and reporting which ensures that the customer receives an independent, accurate and complete assessment of quantity and quality of material. This position will travel at least 75% of the time. Salary & Benefits Information Individual compensation packages are based on a variety of factors unique to each candidate including skillset, experience, qualifications, and other job-related duties. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures Able to perform by specified methodology the below duties in addition to completing the associated paperwork Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges and ships Perform routine equipment calibrations, verification and function checks Verify and communicate the results obtained and to make the entries into the appropriate media Provide on the job assistance and receive training from more experienced inspectors To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator To perform routine equipment calibration, verification and function checks To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner To maintain work areas, records and equipment in a clean, organized and functional condition To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information Model Intertek's 10X Energies at all times within the workplace, practicing business the right way Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work Minimum Requirements and Qualifications Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis Cannot have a fear of heights Ability to climb ladders and stairs for shore tanks Valid driver's license and reliable driving record (required) Must have or be able to obtain a Transportation Worker Identification Credential (TWIC) Ability to work in a fast-paced, multi-tasking environment with shifting priorities and demanding deadlines Must be detailed oriented and able to effectively prioritize and organize workload with efficient time management Ability to communicate and interact effectively in verbal, written and presentation skills Ability to travel as business needs dictate - up to 75% of the time Physical Requirements: Physical requirements to include lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving Ability to climb ladders and stairs for shore tanks Preferred Requirements and Qualifications: Previous experience performing petroleum inspections is preferred TIC certified is a plus

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

We are currently seeking candidates who are certified Lead Inspectors/Risk Assessors . This position is ideal for individuals with strong organizational skills and excellent verbal and written communication abilities. The Lead Inspector/Risk Assessor will be responsible for conducting inspections following EPA and HUD's Chapter 7: Lead-Based Paint Inspection Standards. Positions available in multiple states. Responsibilities Perform all types of Lead-Based Paint (LBP) inspections: Initial Inspections, Annual Inspections, Re-Inspections, Complaint Inspections, Abatement Inspections. Utilize X-ray fluorescence (XRF) technologies in private and public housing units in accordance with EPA and HUD Chapter 7: Lead-Based Paint Inspection guidelines. Conduct Visual Inspections of paint conditions in buildings. Collect dust and paint samples as required by various regulatory agencies, complete data sheets, and chain of custody forms, and prepare samples for shipment to the laboratory. Ensure accurate documentation of field paperwork. Prepare inspection reports (including diagrams and calibration) in accordance with applicable city, state, and federal regulations, promptly and accurately. Maintain professionalism in both appearance and communication. Maintain a good attendance record, including punctuality to scheduled appointments and in-office meetings. Adhere to company quality assurance and quality control requirements. Perform other related duties as assigned. Requirements 2-5 years experience as a licensed Lead Inspectors/Risk Assessor - with no history of violations/disciplinary actions by any State Licensing Board or Professional Trade Organization Experience operating an XRF instrument (preferably Viken Detection Pb200i Handheld XRF Lead Paint Analyzer) for use in LBP inspections or willingness to learn. Experience with procedures for collecting lead paint chip samples or willingness to learn. Flexibility to various work schedules and situations related to emergency response scenarios. Ability to complete inspections and subsequent paperwork independently, as well as occasionally working onsite and in the office with other team members. Ability to carry and climb ladders and use hand and power tools. Ability to wear a respirator, safety harness, and other safety equipment as needed. Strong commitment to punctuality and reliable attendance. Solid verbal communication skills. Maintain confidentiality regarding all company operations and sensitive information. High school diploma or GED certificate. Ability to travel as needed - Current driver's license. Must be available to drive during all working hours. Dependable transportation and adequate automobile liability insurance on the vehicle used to perform the job. Must pass a motor vehicle records check. Willingness/ability to use hand-held tablets for field inspections. Self-starter and able to work independently. Ability to work simultaneously on multiple projects with tight deadlines. Notes Salary: Negotiable, based on experience - contract/performance based Licensing support available through training programs Standard license fee for Lead Risk Assessor is $250 (can be covered by grant for eligible applicants) Standard license fee for Lead Inspector is $250 (can be covered by grant for eligible applicants) About Us Clarendon is a trusted partner for government compliance and advisory solutions, specializing in HUD-compliant services: HUD RCS, appraisals, brokerage, inspections, facility support and strategic guidance for agencies, housing authorities and property owners nationwide. As a cutting edge firm, we place great value on creative and innovative solutions offered to traditional problems and approaches. We employ a team approach to problem solving that ensures that our clients objectives are always at the forefront and believe our people are our greatest asset. If you possess a desire to enhance your career in commercial real estate and welcome a challenging independent position, consider an opportunity with our firm. Information Guidelines Any information you provide to Clarendon must be complete and accurate. Privacy Statement If you accept an offer of employment with Clarendon, the information provided in your application and/or candidate profile and any other information collected in the course of the application and selection process will be stored in our applicant database. Employment Screening As part of our recruitment process, we conduct background screening checks for candidates applying for roles with Clarendon in accordance with regulatory, local legislative, and geographic requirements. Must be authorized to work full-time in the U.S.A.

Build an Aviation Career You're Proud Of Your work ties us all together, helping our team's function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. What you'll do: Ensures the functional and acceptable status of the non-destructive test equipment in accordance with the appropriate company process. Determines the acceptance of parts and components for surface condition in preparation for the non-destructive test process. Performs the specific non-destructive test process as identified in the shop order work instruction. Processes the part(s) in accordance with the appropriate company process. Inspects and interprets the test results. Responsible for reporting on the status and performance of the NDT function to the NDT Manager as applicable. Exercises leadership on NDT related topics, including improvements and Continuous Improvement (CI) projects. Marks all unacceptable discontinuities for location and dimension. Provides technical support to NDT Inspectors Documents the completion and test results of non-destructive test process. Ensures parts are cleaned following completion of NDT process and in acceptable condition for further processing. Performs equipment and material maintenance checks in accordance with the appropriate company process. Maintains records of all maintenance performed on the non-destructive test equipment and materials. Provides instruction and training to NDT inspectors in inspection methods and practices to provide consistent application of best practices. Leads the development and monitoring of NDT related training plans including continual and re-current training Liaisons with engineering, inspection and other personnel as required to assist in researching and solving non-destructive test process problems. Acts as a mentor to NDT personnel and works closely with the Training and Development Specialist where necessary. Maintains personal qualifications as stated in the appropriate company process. Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. As required, may be assigned to perform selected duties of the NDT Inspector to meet operational goals. Carries out other duties as assigned. Position Requirements: Strong planning, organizational, leadership, interpersonal, decision making, oral and written communication skills. Minimum level III in one NDT method Knowledgeable in and understanding of inherent and non-inherent discontinuities found in materials. Knowledgeable in the Workplace Health & Safety requirements. Maintain internal non-destructive test process approval. Ability to read, understand and interpret blueprints Proficient in technical writing. Excellent decision-making skills to ensure compliance to all customer, regulatory and company requirements. Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day. Regularly required to sit and stand for prolonged periods. Working knowledge of production management computer system and other related internal control systems. Currently authorized to work in the Unites States without sponsorship.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job Description We are seeking an experienced Senior Quality Inspector to join our aerospace manufacturing team. This role is responsible for performing detailed incoming, in-process, and final inspections to ensure components and assemblies meet the highest industry standards. The ideal candidate has extensive experience working with extremely tight tolerances (as low as 0.0002”) and will play a key role in ensuring compliance with customer, company, and regulatory requirements. Key Responsibilities: Perform incoming, in-process, and final inspections of aerospace components and assemblies. Verify parts and assemblies against engineering drawings, specifications, and customer requirements with tolerances down to 0.0002” (2/10,000). Use a wide range of precision measuring instruments (micrometers, calipers, CMM, height gauges, optical comparators, etc.). Document and report inspection results, including nonconformances, in accordance with AS9100/ISO 9001 quality standards. Support root cause analysis and corrective/preventive action (RCCA/CAPA) activities. Assist with First Article Inspections (FAIs) in compliance with AS9102 requirements. Work closely with production, engineering, and quality teams to resolve quality issues. Mentor and provide guidance to junior inspectors and production staff on inspection best practices. Requirements: 5+ years of experience in quality inspection within the aerospace or precision manufacturing industry. Proven ability to work with tight tolerances (2/10,000”) and complex precision parts. Proficiency with precision measuring tools and equipment; CMM experience preferred. Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) and ability to interpret complex aerospace blueprints. Experience with FAIs (AS9102), inspection reports, and nonconformance documentation. Familiarity with AS9100 and ISO 9001 standards. Strong computer skills for inspection documentation and reporting (ERP/MRP/QMS experience a plus). Excellent attention to detail, analytical skills, and problem-solving ability. Must successfully pass a pre-employment eye exam to verify visual acuity required for precision inspection. Preferred Qualifications: Prior experience in a lead or senior inspector role. Knowledge of special processes (plating, coating, heat treat, etc.) inspection. Experience supporting customer audits and regulatory compliance.

BWXT traces its history back to the 1850s with the invention of the water tube boiler. Operating for many years as a part of The Babcock & Wilcox Company, our company has long been at the forefront of the commercial nuclear power generation and government nuclear industries, achieving an impressive number of firsts in both businesses. In 2015, The Babcock & Wilcox Company spun off its power generation business to allow BWXT to focus on government and nuclear operations. Job Description BWX Technologies Inc. is looking for the ideal candidate to fulfill the role of Technologist 4 as part of their Nuclear Equipment Manufacturing organization. This role functions out of a regional group to manage, verify effectiveness and continuously improve the NDE training, qualification and oversight program. Additional duties include providing technical counsel and supporting sites and their suppliers in order to ensure the highest level of reliability and compliance. The position may develop and administer training and testing programs related to both commercial and military non-destructive testing specifications relative to the following methods: Radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. Qualifications Qualifications in at least four (4) of the following methods: radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. In addition, the demonstration of proficient knowledge in NAVSEA 250-1500-1, MIL-STD-2132 and ASME Section III through previous work experience is a preferred. Experience as a Level III or Examiner is preferred. The candidate must be currently certified or be capable of attaining certification within 6 months in at least four (4) of the methods listed above in accordance with NAVSEA 250-1500-1 and SNT-TC-1A. Additional Information All your information will be kept confidential according to EEO guidelines.

At Centrus Energy, quality is mission-critical-and as our Lead Inspector, you'll be the guardian of excellence. This role blends technical mastery, leadership, and training into one powerful position that ensures our inspection professionals are certified, confident, and compliant. If you thrive on precision, teaching others, and working at the intersection of nuclear quality and hands-on inspection, this is your moment to shine. What You Will Do: You will lead and deliver inspector training and certification programs, serve as a Level III Nondestructive Testing (NDT) Inspector, and ensure all inspection activities meet SNT-TC-1A, QAPD, NRC, and DOE requirements. You'll develop and approve inspection procedures, perform and oversee complex inspections, manage qualifications and certifications, evaluate nonconformances, and verify corrective actions. You'll audit internal and third-party NDT programs, interface directly with regulators, guide engineering teams on inspection methods, and ensure all inspection equipment is properly calibrated and maintained-keeping safety, quality, and compliance at the forefront of every operation. We'd Love to Hear From People With: Associate degree in a related technical field or equivalent quality experience 6+ years of progressive NDT experience in an industrial or nuclear environment Experience in quality control for design and construction and knowledge of field construction activities SNT-TC-1A certifications in Leak Testing (LT), Visual Testing (VT), and Ultrasonic Thickness (UT) AWS Certified Weld Inspector (CWI) Proficiency with Microsoft Word, Excel, PowerPoint, Access, and Adobe for documentation and reporting Must possess or have the ability to obtain and maintain a “Q” Clearance A Successful Candidate Brings: Prior experience at an NRC-regulated site Bachelor's degree in Science or a technical discipline ASQ certifications or additional quality credentials Deep working knowledge of NQA-1, DOE O 414.1D, and nuclear quality programs Military inspection or quality experience Currently holding an active Q-level security clearance In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. This position will require a pre -employment background check and a pre-employment drug test. Centrus Energy and all subsidiaries shall abide by the applicable legal requirements. We prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity or national origin. This position requires the successful candidate to obtain and maintain a Q security clearance. Candidates for positions requiring a security clearance are required to be tested for the absence of any illegal drug as defined in 10 CFR 707.4 prior to an offer of employment being made. In addition, once employe, employees will become part of a random drug testing program and may also be tested in the event of any incident causing injury or causing damage to property, or if it is determined that there is a reasonable suspicion the employee is under the influence of drugs or alcohol. This position will require preemployment background check on the part of the Company and in order to receive a Q security clearance, a background investigation by the Federal government. Subsequent Federal government reinvestigations may be required. Centrus Energy Corp. is an Equal Opportunity Employer.

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Quality Control Inspector Location: New Albany, Ohio Department: Incoming Reports to: Assembly Shift: Second Shift: Monday - Friday, 2:00pm - 10:30pm _____________________________________________________________________________ JOB SUMMARY The Quality Control Inspector is responsible for ensuring quality product is received and/or produced on the production floor. ESSENTIAL FUNCTIONS - Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Sample products and components according to test plan. Inspect for defects; gauges for necessary dimensions and records as required. Process test parts through anodizing, assembly, deco, or metallizing and inspect for defects. Report any defects as appropriate (visual, functional and dimensional) and fills out final inspection report. Enter data into SyteLine ERP system. Perform quality control tests as required. Provide timely and complete communication with all appropriate departments and functions concerning the acceptability of raw products and components. Lead activities to ensure priorities are established and goals are achieved. Perform all other duties as needed. QUALIFICATIONS Basic mathematical skills, including addition, subtraction, multiplication and division. Understanding of quality control concepts and processes within a manufacturing environment. Self-motivated and able to work independently with minimal direction Able to work overtime as needed - sometimes on a short notice or on weekends Inspection background preferred. Minimum of two (2) years of quality control experience in a manufacturing environment preferred. Benefits you can expect from Anomatic: Competitive Pay Career Growth Health Coverage Starting Your First Day 401K with Company Match, to help save for the future Paid Time Off to Enjoy Family or Hobbies DailyPay, to get your money faster Training, to help hone skills Many more! Anomatic takes pride in creating a safe and inclusive environment that encourages, supports, and celebrates the diverse voices of our employees and the communities in which they live. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. #1Anomatic

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

At Centrus Energy, quality is mission-critical-and as our Lead Inspector, you'll be the guardian of excellence. This role blends technical mastery, leadership, and training into one powerful position that ensures our inspection professionals are certified, confident, and compliant. If you thrive on precision, teaching others, and working at the intersection of nuclear quality and hands-on inspection, this is your moment to shine. What You Will Do: You will lead and deliver inspector training and certification programs, serve as a Level III Nondestructive Testing (NDT) Inspector, and ensure all inspection activities meet SNT-TC-1A, QAPD, NRC, and DOE requirements. You'll develop and approve inspection procedures, perform and oversee complex inspections, manage qualifications and certifications, evaluate nonconformances, and verify corrective actions. You'll audit internal and third-party NDT programs, interface directly with regulators, guide engineering teams on inspection methods, and ensure all inspection equipment is properly calibrated and maintained-keeping safety, quality, and compliance at the forefront of every operation. We'd Love to Hear From People With: * Associate degree in a related technical field or equivalent quality experience * 6+ years of progressive NDT experience in an industrial or nuclear environment * Experience in quality control for design and construction and knowledge of field construction activities * SNT-TC-1A certifications in Leak Testing (LT), Visual Testing (VT), and Ultrasonic Thickness (UT) * AWS Certified Weld Inspector (CWI) * Proficiency with Microsoft Word, Excel, PowerPoint, Access, and Adobe for documentation and reporting * Must possess or have the ability to obtain and maintain a "Q" Clearance A Successful Candidate Brings: * Prior experience at an NRC-regulated site * Bachelor's degree in Science or a technical discipline * ASQ certifications or additional quality credentials * Deep working knowledge of NQA-1, DOE O 414.1D, and nuclear quality programs * Military inspection or quality experience * Currently holding an active Q-level security clearance In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. This position will require a pre-employment background check and a pre-employment drug test. Centrus Energy and all subsidiaries shall abide by the applicable legal requirements. We prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity or national origin. This position requires the successful candidate to obtain and maintain a Q security clearance. Candidates for positions requiring a security clearance are required to be tested for the absence of any illegal drug as defined in 10 CFR 707.4 prior to an offer of employment being made. In addition, once employe, employees will become part of a random drug testing program and may also be tested in the event of any incident causing injury or causing damage to property, or if it is determined that there is a reasonable suspicion the employee is under the influence of drugs or alcohol. This position will require preemployment background check on the part of the Company and in order to receive a Q security clearance, a background investigation by the Federal government. Subsequent Federal government reinvestigations may be required. Centrus Energy Corp. is an Equal Opportunity Employer.

Job Title: Precision Parts InspectorHours & Location: Schedule: Monday through Friday, 7:00 AM - 3:30 PM Pay & Benefits: Starting Pay: $27.00-$29.00/hr, based on experience Contract-to-Hire: Raise upon direct hire, with additional increases at 1-year and 2-year marks Comprehensive Benefits after Hire: Low-deductible medical coverage Free dental and vision insurance 401(k) with company match Paid holidays and vacation Life insurance Christmas bonuses and employee appreciation lunches Job Responsibilities: Inspect precision-machined components to ensure compliance with technical drawings and customer specifications Use micrometers, calipers, height gauges, and other measuring tools Conduct and document First Article Inspections Identify defects and collaborate with manufacturing teams to resolve issues Maintain and verify calibration of inspection equipment Work closely with Quality Assurance and Engineering to refine inspection processes Lift up to 50 lbs as needed Required Qualifications: 4+ years of experience in a manufacturing inspection role Strong blueprint and schematic reading skills Familiarity with various measurement tools and inspection techniques Solid math and communication skills Ability to multitask, stand for extended periods, and work overtime when needed Must be fluent in English (spoken and written) Pre-employment 5-panel drug screen and background check required Work Environment & Culture: This is a clean, air-conditioned, and highly organized 45,000 sq. ft. facility that specializes in precision CNC plasma and waterjet cutting machinery. The company has a strong legacy, now in its fourth generation of family ownership. You'll be joining a team that values long-term careers, offers stable employment, and treats every employee like family.

The Quality Inspector evaluates statistical data to determine and maintain quality and reliability of products on a 2nd shift schedule. What You'll Do: Perform first article inspection which include detailed documentation using customer's forms. Work with minimal supervision using detailed procedures forms and manuals as a guide to job performance. In process auditing that will require the review of operator and process performance working to specifications as referred to in material routings. Use control plans, Material routing instructions, computer print outs, and Pareto charts. Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards. Tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics Records test data, applying statistical quality control procedures. What You'll Need: High school diploma or general education degree (GED) and 5 years related experience and/or training; or equivalent combination of education and experience.